Jobs in Whitakers, NC

Action Health Staffing& Home Care Services SEEKING CERTIFIED NURSING ASSISTANTS HIRING IMMEDIATELY--Rocky Mount, Whitakers & Surrounding areas JOB SUMMARY: The home care aide is responsible for providing services to home care patients in the patient's place of residence. WORK ACTIVITIES: Provide direct patient care as assigned. The following duties may be assigned based on the needs of each client. Provide personal hygiene care. Duties may include bath, shave, hair care, mouth care, and other care of daily living. Assist with methods of transfers, repositioning, and ambulation. Provide basic nursing care and prescribed exercises as instructed by the supervising registered nurse, physical therapist, occupational therapist or speech therapist. Prepare meals with consideration of client's preferences and special diets when so directed. Provide companionship and activities that will vary according to individual needs and interests. Light housekeeping duties as assigned. Participate as a team member to ensure high quality of health care. Maintain complete and accurate records required by agency. Record and report changes in client's physical or psychosocial condition. Complete task according to EVV app for Aide Plan task, and or complete task on the assigned EVV time sheet when needed. Demonstrate dependability by punctually reporting as assigned. Adapt well to client and family value systems. Assist in providing independence within the scope of client's abilities. Perform other duties according to the care plan. Call Action Health Staffing with any questions, concerns, changes and/or comments. Always uphold patient confidentiality/privacy and respect the patients Bill of Rights. Notify Action Health Staffing immediately if you suspect any abuse, neglect, unsafe living environments, or violation of patient's privacy/confidentiality. Always follow the Plan of Care -- Never administer medications. EQUIPMENT USED: Transportation. Blood Pressure Cuff, Stethoscope designated per Plan of Care. The Certified Nursing Aide spends the majority of time involved in direct patient care within the client's place of residence that may vary in the degree accessibility from one client to another. Physical demands include but are not limited to the ability to lift approximately 50 lbs. The CNA is responsible for dealing with a variety of patient disorders and family environments. The CNA accepts assignments based on availability and caseload. There is no guarantee of length of assignment or number of hours per week. Travel is necessary within a specified area. JOB QUALIFICATIONS: Maintain certification with DFS. High school diploma or GED preferred. Possess effective communication skills to include ability to read, write and follow directions. Ability to perform physical tasks necessary to treat clients who may include lifting, bending and standing. Must have sympathetic attitude toward the care of the sick.

Richards Building Supply Co. is currently searching for a CDL Class B Driver for our Rocky Mount, NC Location. Can have either CDL Class A or CDL Class B License with Air Brake Endorsement. Opportunity for overtime!!! Moffett, Flatbed, and Box Truck experience desired. Forklift experience desired. Our delivery drivers are responsible for safely delivering products to the job site and physically unloading material per the customer's request as well as receiving materials in the warehouse, loading trucks, and processing inventory. 2 years CDL Class B delivery driving experience required Benefits: 20 PAID DAYS OFF (includes PTO, Holidays and Family Focused Company Closure between Christmas and New Years). Bonus Incentive program as well as Holiday bonuses and other bonus opportunities! Competitive Hourly Rate with great OT potential during peak season hours. Flexible work/life balanced hours, home every night and typical schedule Monday-Friday 7:00 A.M. - 4:00 P.M. Significant employer contributions towards monthly premiums for Medical, Dental, Vision, Group Life and AD & D benefit plans. Additional Voluntary benefit options available including Short Term and Long Term Disability coverage, Accidental Injury, Critical Illness and Cancer plans as well as additional Life and AD& D benefit policies. 401K program with a best in industry company match. Opportunity for career advancement Family owned, operated and focused company! Qualifications: CDL Class B with Air Brake Endorsement 2 years CDL Class B driving experience Flatbed operating experience strongly preferred Flatbed and Moffett experience desired Box Truck experience desired Forklift experience desired Ability to drive a manual transmission Current DOT medical card Clean driving record Must be at least 23 years of age Heavy Lifting experience Must pass background check and pre-employment DOT drug screen Requirements: Must be able to continually lift 50-100 lbs. of material throughout the day. Some lifting over 100 lbs. will be required. Deliveries will include unloading shingles on one and two story homes Loading trucks with material scheduled for the day's deliveries within compliance of securing and distributing weight limits according to DOT regulations. Unloading trucks and receiving merchandise at warehouse. Move materials and items from receiving to its designated area. It's more than a job, it is your Career! Submit your resume today to join our exciting and growing family. Engage with our Virtual Recruiting Assistant Christine here: OR TEXT: RBS to : (773) ###-#### #ZR Rocky Mount Richards Building Supply is a wholesale building material distributor serving 12 states with over 60 locations! As a family owned, operated and focused company, Richards Building Supply has spent the last 40 years building a thriving and profitable organization, as well as invaluable business relationships. Richards stocks a comprehensive line of products such as residential and commercial roofing, siding, windows, decking, soffit, doors, molding, rainware, cabinets, and more! Learn more about us here : Richards Building Supply believes in hiring military veterans at any level for any position. We know your service trained you in many of the areas we value, such as; leadership, teamwork, performance, integrity, and safety. If your experience matches our requirements, we want you to apply today. It's more than a job, it is your Career! Submit your resume today to join our exciting and growing family. Richards Building Supply is a wholesale building material distributor serving 12 states with over 60 locations! As a family owned, operated and focused company, Richards Building Supply has spent the last 40 years building a thriving and profitable organization, as well as invaluable business relationships. Richards stocks a comprehensive line of products such as residential and commercial roofing, siding, windows, decking, soffit, doors, molding, rainware, cabinets, and more! Learn more about us here: Richards Building Supply believes in hiring military veterans at any level for any position. We know your service trained you in many of the areas we value, such as; leadership, teamwork, performance, integrity, and safety. If your experience matches our requirements, we want you to apply today. It's more than a job, it is your Career! Submit your resume today to join our exciting and growing family.

MANAGE DAILY OFFICE OPERATIONS FOR THE CONSTRUCTION SITE OFFICE Assist purchasing - internet research, pricing, placing orders any additional information Assist superintendents when requested to call vendors to service the site (fuel, waste removal, septic, etc.) Various word processing, spreadsheet work, form creation for superintendents or managers Enter truck deliveries for materials into spreadsheet, maintain file copy and send original to corporate office Keep Supervisors informed of any personnel issues Assist superintendents with processing of expense reports Set-up and closeout of temporary field office. Initiate or terminate services-electricity, water, internet, waste removal, septic, etc Coordinate all correspondence and paperwork between corporate HR and site Greet visitors, manage until appropriate person is available (Vendors, customers, adjacent property owners, inspectors, etc - Main job to keep contained, limit access, be hospitable and keep ears open. Random checks on the security guards and tool attendant Run errands, pick up checks, make copies of keys, pick up supplies Make and receive telephone calls Order office supplies through corporate office manager Make sure construction office is clean and maintained MANAGE THE HIRING PROCESS Take applications, review, brief conversation with the applicant, ID any problems/flags (someone reeking of alcohol, poor hygiene, inappropriate attire, evasive answers, etc) Pre-screen applicants for electricians and operators before sending to foreman Interview applications to hire for general laborers and tool rooms Administer drug testing Review new hire paperwork for completeness and return to corporate HR for processing Distribute applicable uniform apparel to new employees Distribute Benefit Packages to eligible employees in a timely manner - reviewing for completeness and return to corporate HR for processing Assist supervisors with 90-day review forms Assist supervisors with Disciplinary Action form for supervisors ensuring supervisor and employee signatures are completed prior to returning to corporate HR Assist supervisors when requested to Fill out Termination checklist for discharged employees MANAGE PAYROLL PROCESS/TIME KEEPING Supervise and monitor the clock in and clock out process on the iPads - Assist workers in/out Pick up sin in/sign out sheets from the previous day Notify superintendent if there is a time/attendance issue Distribute paychecks - Help employees with questions about their hours and explain their paychecks Alert supervisors when employees are close to 40 Review Exaktime reports for payroll for attendance issues or incomplete information Tuesday through Friday review the Worktime/Off-Clock Summary for exceptions and/or corrections - review for all employees -return to Corporate Payroll in a timely manner Monday review the Worktime/Off-Clock Summary, return any exceptions to Corporate Payroll Review Employee Touch Detail and Executive Summary Report for accuracy and exceptions approving time for previous week- if correct have employees and superintendent sign off on Executive Summary Report and return to Corporate Payroll (Email verification of time is not preferred but will be accepted.) SAFETY/ENVIRONMENTAL In the absence of an on-site Safety Officer you may be required to do the following: Distribute Personal Protective Equipment to new employees Review MSDS file and update as new materials come in Provide supervisors with safety topics for weekly meeting Basic first aid. Heat awareness/prevention (Easy band aid stuff - notify Site Superintendent if it looks like anything beyond a splinter or band aid.) RESPONSIBILITIES: Must display a positive attitude dedicated towards achieving results for the company as well as providing quality service and accuracy. Must maintain a clean and professional appearance and attitude at ALL times while at work, while representing or traveling for the company. Responsible for daily upkeep of your work area Must be flexible with work hours and be able to work overtime as needed Minimal travel to our other offices may be required on occasion

Job Title: FSO Technician The Technician need to have experience in IMACD tasks listed below (IMACD = Install Move Add Change Dispose ) Troubleshoot and resolve End users IT issues in their PCs (Desktop, Desktop, Tablet), Mobile phones, Printers and Other IT Devices in user's environment Support Installations, Moves, Adds, Changes, Disposal (IMACDs) requirements. Provide or oversee, as appropriate, all installations, de-installations, cascades, moves, adds and Changes for all EUC Equipment, Software, and related Services at designated Customer Sites; Coordinate, plan, and schedule IMACDs with all affected IT functions (whether the function is included within the Services provided by Provider, as a Customer-retained function, or a Third Party); and Coordinate all internal and external functions and activities to achieve high-quality execution of the IMACs, to meet Service Levels, and to minimize any operational interruption or business disturbance. Recrate and document the processes to enable IMAC execution for each Software and/or Equipment Component, and obtain Customer's approval for such processes and documentation; Obtain from Customer a list of individuals authorized to approve IMAC and Project IMAC Service Requests, including specific approval and authorization required for IMACs that include Changes to Software. This list may change from time to time and should be updated on a regular basis; Receive IMACD related Service Requests from Authorized Users and validate the IMAC request for correctness and proper authorization Communicate with Authorized Users if there is any issue with an IMACD related Service Request and attempt to resolve or escalate same appropriately; Coordinate and communicate with designated Customer personnel or other Third Parties, concerning scheduling and requirements so as to minimize the impact on Authorized Users; conduct, or confirm a Site survey has been conducted, to determine the location(s) of the IMAC and any special requirements at the location(s); Coordinate any physical space requirements as determined during the Site survey review; Confirm that all Equipment, Software, parts, Network, Cabling, or any other services necessary to execute the IMAC will be available as of the date(s) scheduled for the IMAC; Confirm the new and/or existing Configuration of the Equipment and Software associated with performing the IMAC. Confirm that the installation and/or de-installation procedures associated with performing the IMAC are valid for execution of this IMAC, including Backup, contingency, and test procedures; Schedule and dispatch appropriate technicians, including Third Party Vendors to the IMAC location; Treat every client like a VIP, strengthening the relationship as well as engaging users who otherwise might disengage from IT Cancel Network Transport Services that are no longer required after completing the IMACD

Financial Highlights - Enjoy an Immediate Pay Raise and Professional Growth! $8k Guarantee Per Month for 12 months, $96k First Year, requires one new commercial account with at least 250 employees, every two weeks. $2,500 First Week Training Pay for the first five training days. $500 per virtual appointment bonus with food with no bonus limit. Up to $1500 per week for meeting minimum call and one qualified onsite appointment. 200% of the profit margin for the first 90 days of orders shipped. 40% to 59% of the profit margin after 90 days Up to $10k new client account credits Up to $5k new account donation credits Up to $400 of gift cards for business building activities GHA Technologies, Inc. has become the #1 Employee-Owned Value-Added Reseller in America. Past rewards have included #1 Microsoft Western Region VAR, #1 fastest growing company in Arizona, #69 on the CRN Solution Provider 500, #15 2018 CRN Fast Growth 150 List. We sell the latest AI technologies from Nvidia, Dell, HP, Microsoft, Google, Cisco, Lenovo, Apple, VMWare, Adobe, APC, IBM, Nutanix, EMC, Pure Storage, Samsung, Intel, Eaton, and all the hottest AI and Green Data Center, Virtualization, Energy Conservation, Cloud, Storage, Security, Wireless, SD Wan, Video, Identification, and Power Technologies! We also specialize in mission critical product procurement and integration services for some of the largest Corporate, Government, and Education clients in America! Our client base is a who's who of corporate America! GHA employee owners will receive stock shares every year on top of our industry leading commissions, bonuses, and promotional offerings! Mission critical, online, vast E Commerce distribution network coast-to-coast warehouse locations support just-in-time delivery. Super convenient, orders placed by 9:00 p.m. EST (8:00 p.m. CST) can be received the next morning for in-stock items. Secure, 24-hour access to your own personal portal customized with special pricing on more than 2 million top selling products from 3,500 manufacturers in the USA and across the globe. We are currently HIRING industry experienced Sales Professionals nationwide with a minimum of three years direct technology sales experience. We offer a highly lucrative earnings and benefits package with top salespeople earning between $96,000 to $2,000,000 annually. W-2 Employment, Medical, Dental, and HSA Benefits, 401K Retirement Plan, and GHA company stock ownership (ESOP) plan. Please email your resume to ***************************** and schedule a strictly confidential interview. Visit us at: *******************************

CNA/PCA Positions open in the Whitakers and Enfield areas assisting clients in their homes with ADL and IADL needs. Great pay, flexible schedules, benefits Action Health Staffing& Home Care Services Personal Care Aide Education: High School diploma preferred. Must have the ability to read and write. Experience/Qualifications: At least 6 months of caregiving experience required. Experience must be able to be validated through references. Must be 18 years of age or older. All Personal Care Aides are accountable to the Home Care Manager of Action Health Staffing in regard to rendering client care, or to the employing facility/company in which you are placed. Personal Care Aides are accountable to Action Health Service Manager in regard to staffing issues. Job Duties/Responsibilities: Must follow client's aide plan task provided on app and or in the home. Must complete daily task via EVV and or by completing an electronic copy of time sheet. Encourage clients with self-help. Ability to provide basic personal care such as: bathing, grooming, ambulating, meal preparation (attention being given to special diet needs), assisting with feeding, oral hygiene, assist with limited and standby transfers, and ability to utilize certain special equipment i.e. walkers, wheelchairs, and other personal care task designated on the plan of care. Always utilize safety precautions, follow universal precautions, and follow infection control procedures. Secondary tasks (for the client only) may include, but are not limited to washing clothes and bed linens, cleaning the client's living space, ironing, buying groceries and preparing meals. Always maintain a clean and safe environment and notify Action Health Staffing of any potentially dangerous issues. Contact Action Health Staffing regarding any unusual changes noted in the client's condition. Always respect client's confidentiality/privacy and Patients' Bill of Rights. Always provide quality care to clients. Do not perform any task that is not noted in the client's care plan; do not practice beyond your scope of credentials. Seek guidance from Actions Home Care Manger, or Actions designated staff member when unclear on any task. Always be aware of your client's limitations. Be aware of their whereabouts while still offering them privacy. Only assist with self-administration of medications - Never administer directly. Notify Action Health Staffing immediately if you suspect any abuse, neglect, unsafe living environments, or violation of patient privacy/confidentiality. This job description does not constitute an employment contract. I have been fully versed on

Duration: 05 Months (Possibility of extension/conversion based on the budget & the performance) Client: One of the largest Diesel Engines and Power Generators manufacturers We are looking for an Electrician who will be responsible for installing, maintaining, and repairing electrical wiring, equipment and fixtures and for inspecting, testing, maintaining or repairing electrical equipment. Duties: Measure, cut, and bend wired and conduit, using measuring instruments and hand tools. Maintain tools, vehicles, and equipment and keep parts and supplies in order. Perform semi-skilled and unskilled laboring duties related to the installation, maintenance and repair of a wide variety of electrical systems and equipment. Disassemble defective electrical equipment, replace defective or worn parts, and reassemble equipment, using hand tools. Examine electrical units for loose connections and broken insulation and tighten connections, using hand tools. Qualifications: College Degree/Technical Equivalent required for this position. Minimum 2 years of relevant experience. Robot Troubleshooting. PLC Experience. Understanding Prints/Troubleshooting.

At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. Your role and responsibilities Are you ready to make a significant impact in the world of product management? In this exciting role, you'll collaborate closely with our Product Manager to enhance our offer portfolio and maximize return on investment. Each day, you'll play a crucial role in ensuring ABB fully understands market needs and translates them into innovative offer specifications and development activities. Showcase your expertise by driving various offer lifecycle activities, including development, launch, maintenance, pricing, and profitability. The work model for the role is hybrid in Pinetops, NC. You will be mainly accountable for: • Portfolio strategy: As the needs of our customers and ever evolving modern electrical grid changes, support the global product manager to capture ideas and define new product technical requirements for product development by understanding customer needs and values, providing specific expertise, and knowledge of the existing portfolio. • Technical product support: Comprehensive understanding of portfolio and application to be the go-to technical support for sales and marketing teams, as well as customers. • Product launch: Support the entire product development process from requirement specification and ROI evaluation, to product launch. Create launch documents, train, and assist sales and marketing teams in the launch and selling of new products. • Customer development: Support customer development and assist in resolving customer issues -which will occasionally involve visiting customer sites. • Training: Deliver product and application training to internal teams and customers. • Analysis: Analyze and prepare documentation on market, product, and competitors to support sales, marketing, and customer development. • Go-to-Market strategy: Work with others to define the go-to-market strategy and required tools or resources to support sales growth. • Factory and market alignment: Collaborate with factory teams (i.e., manufacturing, quality, engineering, supply chain, and logistics) to ensure customer satisfaction (e.g., industrialization support, cost monitoring, etc.) and portfolio execution. Qualifications for the role Minimum of 2+ years of experience in product management, engineering, or business experience, working as a product specialist, product manager, application engineer, business development specialist, or similar, with electrification products. Solid understanding of electrical power systems, and related applications and terminology with focus in utility and OEM markets. Demonstrated experience of marketing and sales strategy. A collaborative, solution-focused approach with strong communication, presentation, and relationship-building skills. A bachelor's degree in engineering, marketing or business management is preferred. Strong analytical and organizational skills to manage large amounts of competing priorities. Ability to synthesize complex ideas and concepts and communicate them in technical and commercial terms as well as in layman's terms for end users. Up to 30% travel required, including possibly some international travel. Candidates must already have a work authorization that would permit them to work for ABB in the US. More about us ABB's Distribution Solutions Division facilitates the efficient and reliable distribution, protection and control of power by improving electric power quality while strengthening the resilience of the grid. The Division offers segment-specific products and solutions that largely serve utilities, industry and infrastructure segments, often providing the requisite medium voltage link between high-voltage transmission systems and low-voltage users. With ABB Ability™ enabled connected solutions at its core, the offering includes medium-voltage air- and gas-insulated switchgear (1 to 66 kilovolts), indoor and outdoor circuit breakers, reclosers, fuses, contactors, relays, instrument transformers, sensors, motor control centers, as well as low-voltage switchgear for the ANSI standard markets. We value people from different backgrounds. Apply today for your next career step within ABB and visit *********** to learn about the impact of our solutions across the globe. #MyABBStory We look forward to receiving your application. If you want to discover more about ABB, take another look at our website ***********. Equal Employment Opportunity and Affirmative Action at ABB ABB is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, creed, color, ancestry, religion, sex, national origin, citizen status, age, sexual orientation, gender identity, disability, marital status, family medical leave status, or protected veterans status. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer, applicants may request to review the Affirmative Action Plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. my BenefitsABB.com

Why Deliver with DoorDash? DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day. As a Dasher, you'll stay busy with a variety of earnings opportunities and can work when it works for you. Whether you're looking for a side hustle or a full-time gig, delivering with DoorDash gives you the opportunity to earn extra cash on your terms. Multiple ways to earn: Whether you're delivering meals, groceries, or retail orders, DoorDash offers diverse earning opportunities so you can maximize your time. Total flexibility: Dash when it works for you. Set your own hours and work as much-or as little-as you want. Know how much you'll make: Clear and concise pay model lets you know the minimum amount you will make before accepting any offer. Instant cash flow: Get paid the same day you dash with DoorDash Crimson*. No deposit fees, no waiting. Quick and easy start: Sign up in minutes and get on the road fast.** Simple Process: Just pick up, drop off, and cash out. Payday is in your back pocket. Basic Requirements 18+ years old*** (21+ to deliver alcohol) Any car, scooter, or bicycle (in select cities) Driver's license number Social security number (only in the US) Consistent access to a smartphone How to Sign Up Click “Apply Now” and complete the sign up process Download the DoorDash Dasher app and go *Subject to eligibility requirements and successful ID verification. The DoorDash Crimson Deposit Account is established by Starion Bank, Member FDIC. The DoorDash Crimson Visa Debit Card is issued by Starion Bank. **Subject to eligibility.. ***Must be 19+ in Arizona, California, Colorado, Delaware, Florida, Georgia, Idaho, Kentucky, Montana, New Jersey, New Mexico, Texas, Utah, and West Virginia Additional information Dashing with DoorDash is a great earnings opportunity for anyone looking for part-time, seasonal, flexible, weekend, after-school, temporary, steady delivery gig. Deliver with DoorDash and earn extra cash while being your own boss. Dash when it works for you. Sign up today.

The Crump Group Inc. is a family-owned and operated premium pet treat manufacturer. Started in 2006, we have successfully established 3 market leading brands (Caledon Farms, Crumps Naturals and Dog Delights) distributed throughout Canada and the United States. The Crump Group Inc., a large & rapidly growing pet food manufacturer based in Mississauga, Ontario and Nashville, North Carolina is seeking a dynamic, results oriented Production Planner & Schedule for the North Carolina location. Job Overview- We are looking for a qualified Production Planner & Scheduler to organize production according to demand and quality standards. You will be the one to ensure our goods are produced on time for distribution in a profitable manner. Roles and Responsibilities • Prepare production schedule based on inventory/customer requirements, raw material availability and production capacity • Conduct long-term production planning to identify risk areas related to production capacity. Communicate risks to management • Meet and liaise with the Production Team Leaders and Production Manager regularly to discuss shared resources, bottlenecks and capacities • Set production priorities based on direct customer demand and product development projects • Support the Sourcing Specialist with accurate and timely raw material ordering by providing production plans and forecasts • Liaise with Quality teams to expedite job closures, non-conformance resolutions, and incoming inspections on raw material according to customer or production needs • Prepare information for the weekly Production Meeting - report the status of inventory and production • Prepare and analyze reports on operational metrics as needed • Analyze data and reports using statistical techniques • Contribute to supply chain improvement projects as assigned • Adhere to and promote the adherence to all Corporate, Quality and Health and Safety policies and procedures • Determine manpower, equipment and raw materials needed to cover production demand • Work closely with production manager to monitor jobs to ensure they will finish on time and within budget • Obtain output information (number of finished products, percentage of defectives etc.) • Prepare and submit status and performance reports • Optimize decisions and/or recommendations having substantial impact on day-to-day plant operations and performance • Maintain subassembly planning and Material Resource Planning (MRP) • Ensure the production is in conformance with production/shipping capabilities and constraints • Be a liaison between Sales, Production and other departments • Other duties as required Recipe for Success • An excellent production planner is well-versed in production procedures and ways to optimize them. They are organized and results-driven with great analytical & problem-solving skills. Advanced communication and advance excel skills are very useful for the role. • The goal is to ensure the smooth and cost-efficient flow of our production operations. • Lead day-to-day communication with team and develop harmonious relationships. • Ability to identify new and improved ways of completing tasks. • Willingness to try new things and assume additional responsibilities. A Few Extra Ingredients • The CPG industry experience is preferable • Proven experience as a production planner • Excellent knowledge of production planning and quality control principles • Experience in MRP II (Manufacturing resource planning) • Working knowledge of MS Office, QuickBooks and ERP systems • Good at math and statistics • Strong organizational, analytical and problem-solving skills • Excellent communication abilities • Bachelor's Degree required, Engineering, Business or Science preferred Why Join The Crump Group? Flex Hours Employee Assistance Program Perkopolis Discount Program Tuition Reimbursement Program Career Advancement Opportunities Employee Referral Bonus Program Free Onsite Parking Casual Dress Code Anonymous Employee Engagement Surveys Safety Shoe Reimbursement Dog-Friendly Office The Crump Group is committed to equity in employment and diversity. The Crump Group will provide an inclusive and barrier free recruitment process to applicants with accessibility needs in accordance with the Ontario Human Rights Code and the Accessibility for Ontarians with Disabilities Act (AODA). If you require a disability-related accommodation during this process, please inform The Crump's Group of your requirements.

Become part of an inclusive organization with over 40,000 diverse employees, whose mission is to improve the health and well-being of the unique communities we serve. The Medical Assistant I, Certified provides routine clinical and administrative support to providers and other health care team members in an outpatient clinic setting. The Medical Assistant I, Certified works under the clinical supervision of the provider for patient care activities, and under the general direction of the designated manager/supervisor for non-clinical responsibilities. Responsibilities: 1. Performs rooming and/or intake process, collecting and data, including vital signs, height, weight, and data related to patient's reason for visit. 2. Collects patient and family data, including medical and social history. 3. Reviews patient's current medication list, allergies and preferred pharmacy. 4. Assists the provider as directed, during treatments, examinations and procedures. 5. Collects specimens and performs phlebotomy. 6. Administers medications under the direction of a provider. 7. Performs tests, for examples EKG, eye exams, under the direction of a provider. 8. Reviews the patient record to determine whether patient requires any routine health screenings. 9. Ensures exam/procedure room contains appropriate supplies, equipment, forms and educational materials are available and ready for use during visit/procedure. 10. Provides patient with after-visit, follow-up, self-care or procedural instructions and/or educational materials as directed. 11. Prepares, cleans, stocks and maintains exam and treatment rooms. 12. Cleans and sterilizes instruments. 13. Assists with patient registration, check in/check out, appointment scheduling, and scheduling of tests and treatments, and referrals. 14. Answers clinic telephone and assists in-basket under the direction of a provider or nurse. 15. Assists in emergency situations as directed by a provider or nurse. Other Information Other information: Education Requirements: ● None required as long as other position qualifications are met. ● Completion of a Medical Assisting program accredited by either the Commission on Accreditation of Allied Health Education Programs (CAAHEP) or the Accreditation Bureau of Health Education Schools (ABHES) is strongly preferred but not required. Licensure/Certification Requirements: ● Requires Medical Assistant certification by either the American Association of Medical Assistants (AAMA), American Medical Technologists (AMT), National Health Career Association (CCMA), National Association of Health Professionals (NRCMA), or National Center for Competency Testing (NCMA). ● Basic Life Support Certification from American Heart Association (AHA) or American Red Cross (ARC) required. Professional Experience Requirements: ● Prior medical assistant or medical assistant externship experience preferred. Knowledge/Skills/and Abilities Requirements: ● Ability to perform the essential functions of the position as outlined above. ● Demonstrated effective communication and interpersonal skills. ● Demonstrated ability to engage positively with patients and families and to work as a team with staff and providers. ● Ability to use a computer to document required information into the electronic medical record. Job Details Legal Employer: NCHEALTH Entity: UNC Physicians Network Organization Unit: Eastern NC Med Grp - Rocky Mnt Work Type: Full Time Standard Hours Per Week: 40.00 Salary Range: $15.64 - $22.48 per hour (Hiring Range) Pay offers are determined by experience and internal equity Work Assignment Type: Onsite Work Schedule: Day Job Location of Job: US:NC:Rocky Mount Exempt From Overtime: Exempt: No This position is employed by NC Health (Rex Healthcare, Inc., d/b/a NC Health), a private, fully-owned subsidiary of UNC Heath Care System. This is not a State employed position. Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. UNC Health makes reasonable accommodations for applicants' and employees' religious practices and beliefs, as well as applicants and employees with disabilities. All interested applicants are invited to apply for career opportunities. Please email applicant.accommodations@unchealth.unc.edu if you need a reasonable accommodation to search and/or to apply for a career opportunity.

About the Role Responsible for managing total store operations. Meet or exceed established financial and sales goals. Build associate and customer relations and promote a strong culture in support of Food Lion Strategy. Maintain solid communications with the management team, all associates in the store and throughout the organization. Ensure conditions involving security, safety, and food safety are consistently maintained at the highest levels. Responsibilities Maximize all resources (physical, human and financial) that will enable the store to achieve financial objectives while maximizing sales potential and growing the customer base Lead the implementation of both store specific and corporate initiatives by setting high standards, proper planning and delegation Ensure compliance with state and federal laws, company policies and standard practices Apply and expand industry and market knowledge to create and improve competitive position Provide leadership and motivation within the store to promote a culture reflective of our Guiding Principles, Core Values, Vision and Strategy Provide a safe, secure and pleasant environment for customers and associates Ensure that proper control of all store funds and company assets are maintained Foster a positive environment which anticipates and satisfies needs of associates and customers and establishes the store as a valued member in the community Value differences (mirror the diversity in the community) Assure the recruiting and selection of the best qualified candidates to meet identified store talent needs Recognize, evaluate and develop associates to balance business objectives and individual needs Treat all store information with strict confidentiality Provide recognition of accomplishments and offer constructive counseling when necessary as it relates to achieving customer satisfaction and service while building store sales Understand and use company tools such as; financial reports, average cost inventory system (ACIS), scheduling, productivity, ordering (CAO), and business information systems Understand and utilize the Profit and Loss (P&L) Maintain an action plan on all associates identified as not meeting the productivity standards of performance or exceeding shrink controls, implement training and accountability as needed Successfully complete Computer Based Training (CBT), Training Packet and Training Aid courses Perform all other duties and projects as assigned Qualifications College graduate or equivalent preferred Solid understanding of store operations required Excellent interpersonal, organizational, communication and customer service skills Ability and willingness to learn multiple tasks and technical requirements of the job Ability to use technical information to solve problems Ability to lead and direct others Must meet minimum age requirements to perform specific job functions Must be able to meet the physical requirements of the position, with or without reasonable accommodations Must be accredited by the National Registry of Food Safety Professionals or similar accrediting organization as a “Certified Food Safety Manager” or will be required to attend company provided training and have the ability to achieve accreditation within the first 90 days of employment; Accreditation must be maintained while employed in a position requiring accreditation

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr. , depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties:Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc. ) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc. ) Some In-Home Usage Tests projects may require participants to use MFour's Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements:Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or olderA paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits:Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested

MAU is hiring an Electrical Project Engineer for our client in Roanoke Rapids, NC. As an Electrical Project Engineer, you will coordinate the planning, organization, and completion of capital projects to support operational goals and drive process improvements. This is a direct-hire opportunity. Benefits Package: 401(k) Life insurance Health insurance Dental insurance Vision insurance Short-term disability Paid time off Flexible spending account Health savings account Shift Information: Monday-Friday | 8:00 AM - 5:00 PM Required Education and Experience: Bachelor's degree in Electrical Engineering 2-5 years of experience in an electrical engineering role within industrial manufacturing Preferred Education and Experience: Pulp & Paper industry experience Project Management experience (PMP Certification a plus) Drafting and CAD (AutoCAD) training/experience General Requirements: Strong problem-solving and process-analysis skills Proven leadership and collaboration within cross-functional teams Essential Functions: Manage all phases of capital projects from inception to start-up Develop project scopes, cost estimates, and schedules Prepare and manage engineering drawings with internal teams, vendors, and firms Coordinate design activities including equipment sizing, P&IDs, piping, structural, electrical, and process control Review engineering drawings from vendors and consultants Ensure projects comply with safety and environmental standards Conduct project design review meetings Direct consultants, contractors, and maintenance teams Supervise construction and start-up activities Monitor project budgets and timelines Provide accurate capital and expense cash flow forecasts Maintain engineering documentation for projects Collaborate with Operations, Maintenance, and other stakeholders Provide technical electrical support to Operations and Maintenance Promote Root Cause Failure Analysis (RCFA) and data-driven improvements MAU Workforce Solutions is an innovative global company with extensive experience providing solutions for success in staffing, recruiting, technology and outsourcing to our clients, employees, and applicants. Headquartered in Augusta, GA since 1973, MAU is a family and minority-owned company offering better processes and better people to create efficiencies and greater profits for our clients. Our relationships with world-class companies, our training programs and our culture of family allow MAU to offer better results, better jobs, and better lives to those who work with us. All Applicants must submit to background check and drug screening Disclaimer: This job description is not designed to be a complete list of all duties and responsibilities required of the position EOE

Looking to Partner with Owner Operators and Lease Purchase Drivers!. Join our Team as a Owner Operator!! Make 82% from Gross No forced dispatch MUST HAVE YOUR OWN PLATES AND REGISTRATION Join our Lease to Purchase Program and Get Deals as Low as $500 Weekly 78% of Gross (Includes cargo, trailer, dispatch charge) Weekly gross estimated after payment/escrow/insurance etc deductions (average): Depends on Gross Pay 2019 to 2024 Freightliners Factory Warranty No money down needed Estimated lease cost (weekly) $500 to $900 depending on truck year Lease amount deducted from pay No credit check No interest Flat payment No Fuel Discounts at this time No Company Benefits - 1099 Position Flexible Schedule Requirements MUST HAVE YOUR OWN PLATES AND REGISTRATION NO SAP NO DUI NO Reckless Driving History

The Site Strategy & Operational Excellence (S&OE) Lead will be responsible for the creation of the Site strategic direction, and accountable for providing process to achieve the Site Strategy through functional (Center of Excellence) & Focus Factory Alignment. The primary purpose of this role is to drive Site Strategic Governance facilitation and the Site Master Plan, including the Goal Setting Process. The Site Strategy & Operational Excellence (S&OE) lead will have responsibility of the Center of Excellence for Continuous Improvement (CI) at the site (e.g. E2E Flow, lean operations, etc.). Other duties will include the Site OpX Capability build for Lean, Six Sigma and Innovation. Training focused on community learning, adaptive learning, technology advancement, on-the-floor learning tools and site Supply management will roll into this position. This will also have oversight of the development of short and long-term goals, PMO program management, the site i4 program, and OpX Site Maturity (OpX inclusive of IMex). Additionally, this role will also be responsible for Supply and Change Management at the site, including the process and site overview of the process. ROLE RESPONSIBILITIES OpX Site Maturity (OpX inclusive of IMEx) Supply function and capabilities Strategic Learning and Development Change Management at site, the process and site overview Budget and resourcing (creation, monitoring, and control) for function Partner with Strategy & OpX leads at other sites to leverage synergies & best practices Accountability for PMO strategic initiatives & Technical development plans Develop, own, maintain & improve site scorecard to deliver against site performance expectations Site Operational Excellence KPI performance monitoring (e.g. OpX project completion rate, OpX Capability, Site RTE & OEE, Site CIP, PMO performance) Site Strategic & Opx team development & competency building (e.g. mentoring directing reports), manage succession / key player pool within function Culture instilled within function that prioritizes Quality Compliance, Supply Reliability, Safety, & Business Performance BASIC QUALIFICATIONS Bachelor's degree in Business Administration, Industrial Engineering, or a related field with 8+ years in pharmaceutical manufacturing. Background in operational excellence, process improvement, and strategic planning. OR Master's degree or MBA with 7+ years in pharmaceutical manufacturing Background in operational excellence, process improvement, and strategic planning. 5 years of experience in a manufacturing or production environment. Proven track record of leading and managing teams in a high-volume manufacturing setting. Experience with lean manufacturing principles and continuous improvement methodologies Proven track record of managing supply operations and leading teams Familiarity or experience leading adult learning in a pharmaceutical manufacturing environment. Experience with logistics software and ERP systems. Strong knowledge of manufacturing operations with experience in multiple sites and functions including Quality Operations, Supply Chain, etc. Proven ability to influence and lead organizational change at a site and network level. Demonstrated success in leading cross-functional teams and driving change management initiatives. Strong analytical and strategic skills with experiencing solving complex and unique problems. Well-developed interpersonal skills with ability to collaborate across PGS functions and work effectively across all levels of the organization in complex, diverse, multi-cultural organizations. Proficient in six sigma/lean methodologies. Strong leadership skills necessary to engage, influence and motivate colleagues at all levels and across cultures in a global organization at all times. Candidate demonstrates a breadth of diverse leadership experiences and capabilities including: the ability to influence and collaborate with peers, develop and coach others, oversee and guide the work of other colleagues to achieve meaningful outcomes and create business impact. ABILITY Excellent verbal, written and interpersonal communication skills, including poise and maturity to gain credibility with senior leaders. Demonstrated ability to plan, implement, and achieve significant, complex goals and objectives. Excellent organizational agility - The ability to persuade and influence people at all levels and develop good working relationships that promote team working. Analytical and strategic thinking with good business acumen and the ability to think from the customers' perspective. INFLUENCE Network replication of best practices Cross-functional collaboration to ensure functional strategies are aligned with larger site-wide strategy Cost and efficiency improvement across the site Tier 3 CI Loop alignment with the site strategic priorities Site-wide Lean behaviors NON-STANDARD WORK SCHEDULE, TRAVEL OR ENVIRONMENT REQUIREMENTS Ability to travel up to 50% of the time occasionally, ~25% on an annualized basis. Work Location Assignment: On Premise The annual base salary for this position ranges from $182,000.00 to $303,300.00. In addition, this position is eligible for participation in Pfizer's Global Performance Plan with a bonus target of 22.5% of the base salary and eligibility to participate in our share based long term incentive program. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with Pfizer Matching Contributions and an additional Pfizer Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at Pfizer Candidate Site - U.S. Benefits | (uscandidates.mypfizerbenefits.com). Pfizer compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided does not apply to Tampa, FL or any location outside of the United States. Relocation assistance may be available based on business needs and/or eligibility. Sunshine Act Pfizer reports payments and other transfers of value to health care providers as required by federal and state transparency laws and implementing regulations. These laws and regulations require Pfizer to provide government agencies with information such as a health care provider's name, address and the type of payments or other value received, generally for public disclosure. Subject to further legal review and statutory or regulatory clarification, which Pfizer intends to pursue, reimbursement of recruiting expenses for licensed physicians may constitute a reportable transfer of value under the federal transparency law commonly known as the Sunshine Act. Therefore, if you are a licensed physician who incurs recruiting expenses as a result of interviewing with Pfizer that we pay or reimburse, your name, address and the amount of payments made currently will be reported to the government. If you have questions regarding this matter, please do not hesitate to contact your Talent Acquisition representative. EEO & Employment Eligibility Pfizer is committed to equal opportunity in the terms and conditions of employment for all employees and job applicants without regard to race, color, religion, sex, sexual orientation, age, gender identity or gender expression, national origin, disability or veteran status. Pfizer also complies with all applicable national, state and local laws governing nondiscrimination in employment as well as work authorization and employment eligibility verification requirements of the Immigration and Nationality Act and IRCA. Pfizer is an E-Verify employer. This position requires permanent work authorization in the United States. Continuous Imprv and Proj Mgmt

MIT/Co-Manager At Impact RTO, our business is centered on service and we're passionate about what we do. Our environment is fast-paced and offers ample opportunity to grow and develop. This position requires a high level of initiative and frequently exercises discretion and independent judgment. Must complete Path to Promotion prior to promotion to this position. Our coworkers enjoy a total rewards package that pays for performance and includes: Industry-leading base pay ranges for all positions Monthly bonus potential 5-day workweek with every Sunday off Paid sick and Personal days Employee purchase plan 401(k) Retirement Savings Plan A comprehensive benefits package to include: medical, dental, and vision insurances, plus company paid life and AD&D insurance, critical illness and accident coverage, short term and long term disability ESSENTIAL JOB FUNCTIONS Monitor and ensure total customer satisfaction Create, manage, and execute plans to increase sales and profits. Keep coworkers informed of promotions and products Coach and improve the sales skills of all coworkers Manage and execute plans to keep store account management at standards Coach and improve the account management skills of all coworkers Maintain the store in 'Rent Ready' condition Set specific goals for store performance, customer satisfaction and coworker development Manage coworkers including selection, training, motivating, evaluating, coaching and developing Manage store performance by budgeting and analyzing various reports Manage store inventory by ordering, receiving and transferring products to ensure revenue and profit growth Organize daily activities including scheduling coworkers to meet needs of the store Manage and secure the assets of the store Ensure all policies, procedures and standards are followed and adhered to Assist with customer deliveries and merchandise set-up when needed Any other duties assigned by the Regional Manager Job Qualifications Candidates must meet the following requirements: Been a proficient internal assistant manager or 2 years of external management experience Profit and Loss experience Computer literacy/proficiency in a windows operating system Must be at least 18 years of age Have a valid High-School Diploma or Equivalent Possess a valid state Driver's License Excellent communication skills, both oral and written Be legally permitted to work in the US Must be able to pass a background check, drug screening, and motor vehicle records check Heavy lifting required

Management has the discretion to change or modify the duties and essential functions at any time in accordance with operating needs. Frequency of essential functions, marginal functions, machine/equipment/tools used, physical requirements, and working conditions may change somewhat due to the type of railcar, weather, and location operating restriction, but ALL MAINTENANCE SPECIALISTS perform basically the same work. 1. Repairs, modifies, and upgrades rail cars. 2. Rebuilds car components: bolsters, side framers, hitch heads, and box car doors. 3. Welds (30% of time), fabricates, and uses cutting torch. 4. Performs mechanical labor (frequently - 95% of time). 5. Repairs and maintains railcars, according to blueprints and other specifications, using hand tools, power tools, and precision measuring instruments. Inspects machines and equipment visually by touch, special knowledge and training, to locate causes of trouble. 6. Operates forklift to move, align, and set in place parts in place. 7. Measures, cuts and threads pipes and replaces air lines using hand tools. 8. Assembles subassemblies, major components, and equipment. Checks function to test for proper operation. 9. Repairs broken parts using hand tools and welding equipment. 10. Enters car repair information via electronic keyboard system. MARGINAL FUNCTIONS 1. Maintains a clean work environment. 2. May set up and operate metalworking tools, such as welder or grinder. 3. All other duties as assigned by supervisor. PERFORMANCE STANDARDS: 1. Must perform each job to specified time standards. 2. Work must be done to the customer requirements (AAR, FMO, FRA, TTX, etc., standards). 3. Must comply with all work rules. 4. Must work safely and not cause a threat to the health and safety of self and others. MACHINE/EQUIPMENT/TOOLS USED: 1. Circular saw. 2. Air impacts 1/2", 3/4", 1"; Air grinders 4", 7", 9"; Air or hydraulic porta power pump and ram used regularly. 3. Various hand tools used frequently. 4. Cutting torch used for cutting frequently; heating torch used while bending regularly; side grinder used for grinding regularly; hoist used for lifting regularly; winch used for pulling regularly. SAFETY EQUIPMENT: Steel toe shoes, hard hat, ear plugs, safety glasses, welding shield, burning goggles, grinding shield, and proper clothing (long sleeve shirts and long pants while welding). PHYSICAL REQUIREMENTS: 1. Physical abilities (approximate times - vary slightly by location): standing, hearing, and seeing for 8 or 10 hours; handling for 6 hours; walking, stooping, kneeling, crouching, and fingering for 5 hours; reaching below waist, twisting, and feeling for 2 hours; sitting, climbing, balancing, crawling, reaching over head, and talking for 1 hour. Frequently: standing, kneeling, stretching, reaching, gripping tools or objects, and bending at the waist. Regularly: walking, crouching, and twisting while standing. Occasionally: sitting, crawling, and twisting while sitting for 1 hour or less. 2. Lifting: car parts from 1-80 lbs. throughout the day (lifting 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally). 3. Wrenches weighing up to 10 lbs. to tighten bolts (occasionally - 4 hours). 4. Pulling: 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally; carrying 50-75 lbs. QUALIFICATIONS: 1. Knowledge: mechanical skills. 2. Skills: welding and cutting. 3. Mental factors: decision-making and reasoning; intermediate (such as determining when parts should be repaired); planning and scheduling - limited; compiling/classifying/gathering information - intermediate short-term memory - intermediate. WORKING CONDITIONS: 1. Working environment: Requires outdoor work (8 or 10 hours/day; exposure to heat, cold/humidity; working at heights regularly; working around moving machinery occasionally. 2. Environmental Conditions: Exposure to welding and burning fumes, odors, dust, gases, and uncomfortable noises from welding and burning (10 hours/day); working in hot temperatures regularly; working in cold temperatures occasionally; driving automotive equipment occasionally; working with oil and grease regularly; working with vibrations regularly; and working alone occasionally. 3. Hazard Exposure: Mechanical from tools; electrical from welders; and radiant energy from torches frequently (10 hours/day). WORKING SCHEDULE: 8 to 10 hour shifts; work hours and rest days may change regularly. REPORTING RELATIONSHIP: Reports to line supervisor or work group supervisor. PAY RATE: The pay rate for the Railcar Repairman position begins at $28/hour. Pay rate is determined based on Carman experience or Journeyman status.

Product Engineer - LV & MV Instrument Transformer Products At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. Write the next chapter of your ABB story. This position reports to Product Engineering Manager Role and Responsibilities As a member of the Product Engineering team, you will drive improvements in Electrification Distribution Solutions (ELDS) in Pinetops, North Carolina. The Product Engineer for LV & MV instrument transformer products provides technical support related to the development and production of LV & MV IT products, including their accessories and various hardware. The role also includes estimating production costs and recommending design changes to simplify production processes, reduce costs, improve product quality, and meet special customer requirements. The work model for the role is: onsite This role is contributing to the Electrification Distribution Solutions division in Pinetops, NC. You will be mainly accountable for: Analyze and evaluate all aspects of the LV & MV IT product line, including manufacturing processes, individual components, application requirements, and special customer requirements. Manufacturing processes include: general assembly, vacuum and APG resin casting, copper & metal forming, and all aspects of product testing. Work directly with testing and manufacturing associates to fully understand internal manufacturing processes to ensure employee safety, improve quality, and reduce lead times and costs. Create, review and maintain production specifications such as BOM's, production instructions, and testing requirements. Design or modify fixtures to improve production. Work directly with sales, product management, quality, and design engineering to address customer concerns, identify potential product improvements, participate in design reviews, and launch new products in manufacturing. Work with customer service to set up new designs to meet customers' application needs. Offer optimized design suggestions for components such as plastic components, insulation systems and various other mechanical components that result in safety, quality, or cost improvements. Work in partnership with suppliers to improve part quality and maintain production capacity. Implement design changes using CAD software and GD&T techniques. Qualifications for the role Bachelor's Degree in electrical or mechanical engineering or a degree in a related field plus 2 or more years of electro-mechanical design / manufacturing experience. Familiar with the design of electro-mechanical components and the selection, specification, and testing of conductive and insulating materials. Ability to effectively use the following computer applications: Microsoft Word, Excel, PowerPoint, SolidWorks, AutoCAD preferred. More about us ABB's Distribution Solutions Division facilitates the efficient and reliable distribution, protection and control of power by improving electric power quality while strengthening the resilience of the grid. The Division offers segment-specific products and solutions that largely serve utilities, industry and infrastructure segments, often providing the requisite medium voltage link between high-voltage transmission systems and low-voltage users. With ABB Ability™ enabled connected solutions at its core, the offering includes medium-voltage air- and gas-insulated switchgear (1 to 66 kilovolts), indoor and outdoor circuit breakers, reclosers, fuses, contactors, relays, instrument transformers, sensors, motor control centers, as well as low-voltage switchgear for the ANSI standard markets. We value people from different backgrounds. Apply today for your next career step within ABB and visit *********** to learn about the impact of our solutions across the globe. #MyABBStory We look forward to receiving your application. If you want to discover more about ABB, take another look at our website ***********. Equal Employment Opportunity and Affirmative Action at ABB ABB is an Equal Employment Opportunity (EEO) and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, creed, color, ancestry, religion, sex, national origin, citizen status, age, sexual orientation, gender identity, disability, marital status, family medical leave status, or protected veterans status. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer, applicants may request to review the Affirmative Action Plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected veterans and qualified individuals with a disability may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. my BenefitsABB.com

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies. We guarantee 15-25 hours per week with an hourly pay of between $25/hr. and $45/hr. , depending on the In-Home Usage Test project. No experience required. There is no payment required in order to apply or to work as an In-Home Usage Tester. You don't have to buy products or pay for shipping, everything is paid by our company. In-Home Usage Testers are considered independent contractors, we pay weekly every Wednesday by direct deposit or by cheque. Online Consumer Panels America is a consulting firm that specializes in product testing and product development work. We design and conduct In-Home Usage Testing (IHUT) locally and nationally to provide actual user feedback in real-time to companies and market research firms to evaluate products to ensure proper product certification and greater market access. It is important to note that during your application process, reputable market research companies will determine your demographics and consumer profile to establish what products would be suitable for you to test. Market research companies that partner with us will use questionnaires to identify and target certain types of consumers, to ensure that the right participants are engaged and to achieve the representative sample needed. Participation in these product testing and consumer panels is always free, secure and private. In-Home Usage Testing is a quick, easy and fun way to make extra cash by telling big brands what you think about their upcoming products and services in the American market. Main Duties:Properly document In-Home Usage Tests as instructed in the In-Home Usage Test Daily Schedule (screenshots, audio recordings, videos, product journal entries, etc. ) Take care of the product being tested and use it responsibly Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a certain amount of time, writing reviews, taking pictures, etc. ) Some In-Home Usage Tests projects may require participants to use MFour's Mobile In-Home Use Test Technology (cutting-edge smartphone technology to capture Point-of-Emotion insights to gain unparalleled depth of responses) There are times when the product being tested may be discussed in a private chat room that is opened by a market research firm Write reviews as requested in the In-Home Usage Test Daily Schedule for each project Requirements:Ability to follow specific instructions Excellent attention to detail and curious spirit Be able to work 15-25 hours per week and commit to a certain routine Have access to a computer and a reliable internet connection Have access to a digital camera or cell phone that takes pictures -Be honest and reliable -Good communication skills are an asset -18 years or olderA paid Product Tester position is perfect for those looking for an entry-level opportunity, flexible or seasonal work, temporary work or part-time work. The hours are completely flexible and no previous experience is necessary. Benefits:Very competitive pay rate Weekly pay Work around your own schedule Learn about an exciting industry Telecommute (you can work from home, work or school) Most of the time you can keep the product you tested