Welder Jobs in Whitney, NV

BRIEF DESCRIPTION: ID Grind machinist are responsible for producing work in the most efficient manner while meeting the drawing/planning specification /requirements. Sets-up and operates grinding machines to produce parts to established blueprint and engineering specifications. Selects, mounts, attaches and calibrates a variety of attachments to grind angles, contours, lines, spheres, etc. on to surfaces. Set-ups may require blocking, aligning, and securing irregular shaped work pieces. Dress and change wheels for various finish requirements. Relies on experience and judgment to plan and accomplish assigned tasks and goals. May orient, train, assign and check the work of lower-level associates. KEY ACCOUNTABILITIES • Completes set-ups with some supervision/assistance. • Responsible for all phases of part operation set-up to achieve first article acceptance. • Perform and maintain accurate in-process quality inspection and records. • May identify and recommend process improvements that reduce part quality variation. • May improve processes, procedures, and eliminate waste. • Perform other related duties as assigned. DESIRABLE EXPERIENCE, CAPABILITIES AND SUCCESS FACTORS Experience operation set-up on CNC ID grinding equipment. Skilled in the use of indicator, gage, dial bores, and plate inspection methods for first article and in-process inspection of precision machined parts. Ability to maintain close tolerances (within .0003”) of ID's, hold .0003 profile, roundness. Understanding of machine tool accuracies, tool offsets. Knowledge of cutting wheel feeds, speeds, and wheel life for aerospace grinding. Ability to follow verbal instructions and interpret blue print and quality requirements. Ability to communicate with employees and management in a positive manner. Ability to lift a maximum of 25 lbs (over 25 lbs with assistance). Ability to stand for long periods of time. Ideal candidate will have experience with AS9100, 5S, Lean, and Six Sigma. Per ITAR requirements you must be a US Person (US Citizen or Permanent Resident Card Holder). This position is subject to policies and procedures set forth by the State Department and applicants who do not meet such requirements will not be eligible for the position. Salary Range: $20.00 - $30.00 Several factors are considered when extending an offer, including but not limited to, the role responsibilities, candidate's work experience, skills and education. Benefits Medical, Dental, Vision and Prescription Drug Coverage Spending accounts (HSA, Health Care FSA and Dependent Care FSA) Paid Time Off and Holidays 401k Retirement Plan with Matching Employer Contributions Life and Accidental Death & Dismemberment (AD&D) Insurance Paid Leaves Tuition Assistance About Regal Rexnord Regal Rexnord is a $6.5B publicly held global industrial manufacturer with 30,000 associates around the world who help create a better tomorrow by providing sustainable solutions that power, transmit and control motion. The Company's electric motors and air moving subsystems provide the power to create motion. A portfolio of highly engineered power transmission components and subsystems efficiently transmits motion to power industrial applications. The Company's automation offering, comprised of controls, actuators, drives, and precision motors, controls motion in applications ranging from factory automation to precision control in surgical tools. The Company's end markets benefit from meaningful secular demand tailwinds, and include factory automation, food & beverage, aerospace, medical, data center, warehouse, alternative energy, residential and commercial buildings, general industrial, construction, metals and mining, and agriculture. Regal Rexnord is comprised of three operating segments: Industrial Powertrain Solutions, Power Efficiency Solutions, and Automation & Motion Control. Regal Rexnord has offices and manufacturing, sales and service facilities worldwide. For more information, including a copy of our Sustainability Report, visit RegalRexnord.com. Equal Employment Opportunity Statement Regal Rexnord is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex/gender, sexual orientation, gender identity, age, ancestry, national origin, marital status, citizenship status (unless required by the applicable law or government contract), disability or protected veteran status or any other status or characteristic protected by law. Regal Rexnord is committed to a diverse and inclusive workforce. We are committed to building a team that represents diverse and inclusive backgrounds, perspectives, and skills. If you'd like to view a copy of the company's affirmative action plan or policy statement, please email ***************************. If you have a disability and you believe you need a reasonable accommodation in order to search for a job opening or to submit an online application, please e-mail ***************************. Equal Employment Opportunity Posters Notification to Agencies: Please note that Regal Rexnord Corporation and its affiliates and subsidiaries ("Regal Rexnord") do not accept unsolicited resumes or calls from third-party recruiters or employment agencies. In the absence of a signed Master Service Agreement or similar contract and approval from HR to submit resumes for a specific requisition, Regal Rexnord will not consider or approve payment to any third-parties for hires made.

Day-to-Day Performs welding and HVAC installation tasks in the field under the direct supervision of the Foreman and Lead Installer. Ensures high-quality workmanship, safety compliance, and support for efficient mechanical system installations. Key Responsibilities: Works under the guidance of the Foreman and Lead Installer to complete HVAC installation tasks involving welding and mechanical assembly. Welds HVAC components including ductwork, piping, brackets, and structural supports Assembles and installs HVAC and sheet metal systems per project specifications, shop drawings, and field layouts. Secures joints and seams using certified welding techniques, bolts, caulking, and mechanical fasteners to ensure integrity and durability. Installs HVAC assemblies such as ducts, refrigerant, and hydronic piping, supports, and equipment enclosures in coordination with the field team. Uses hand and power tools to cut, grind, smooth, and finish welded surfaces for safe and professional results. Prioritizes safety at all times, adhering to all company and OSHA safety standards during welding and installation activities. Maintains welding tools and equipment in clean, safe working condition, and reports issues to Foreman or Lead Installer. Supports the overall field installation effort by staying productive, communicating effectively, and contributing to a team-oriented job site environment. Qualifications: Certified Welder (AWS or equivalent) - required. Experience in HVAC system installation and sheet metal work preferred. Ability to follow directions from Foreman and Lead Installer and work within a structured team environment. OSHA 10 or 30 certification is a plus. Strong commitment to quality, safety, and teamwork. Pay: $28hr - $35hr

The Saw Operator is responsible for operating and maintaining sawmill equipment to process logs into lumber efficiently and safely. This role requires precision, attention to detail, and adherence to safety and quality standards to ensure optimal production performance. Key Responsibilities Operate sawmill equipment to cut logs into lumber according to specifications. Monitor and adjust machine settings to maintain accuracy, efficiency, and product quality. Perform routine maintenance and troubleshooting to minimize downtime. Follow lock-out/tag-out (LOTO) procedures and other safety protocols. Inspect lumber for quality control, ensuring correct sizing and minimizing waste. Work collaboratively with production and maintenance teams to optimize workflow. Keep work areas clean and organized to maintain a safe environment. Report equipment issues or safety concerns to the supervisor. Follow all company policies and standard operating procedures (SOPs). Qualifications & Requirements Experience operating sawmill saws or similar machinery preferred. Knowledge of lumber grading, cutting techniques, and production processes. Ability to read measurements and blueprints accurately. Strong mechanical aptitude for troubleshooting and adjustments. Commitment to safety protocols and workplace regulations. Physical ability to stand, lift, and work in a fast-paced environment. Team-oriented mindset with strong communication skills. This is a vital role in the sawmill operation, ensuring precision cutting and efficiency in lumber production. If you have a keen eye for detail, mechanical skills, and a strong work ethic, we encourage you to apply!

Qualifications: High school diploma or equivalent; technical or vocational training in machining preferred. Proven experience (8+ years) as a CNC machinist/Fabricator in a manufacturing environment. Ideal candidate has 8+ years of experience that can walk in and run all equipment. Strong knowledge of CNC machining principles, materials, and manufacturing processes. Proficiency with CNC programming languages (e.g., G-code, M-code). SolidWorks & Mastercam experience Needs MIG welding experience MIG welding of fixtures (1/4" - 3/4" of THK Steel) They have two HAAS Machines (5 axis), a new lathe, plasma cutting table, welders, 2 benders & getting a water jet and laser cutting table shortly. Candidate needs experience operating and programming all of those (if needed) Able to work independently, no one will be overseeing them. Will support a team of 20-30 engineers Ability to read and interpret technical drawings and blueprints. Familiarity with measuring instruments and quality control procedures. Strong attention to detail and commitment to producing high-quality parts. Excellent problem-solving skills and the ability to work independently. Ability to work in a fast-paced environment and meet production deadlines. Strong communication and teamwork skills. Knowledge of multi-axis CNC machines. Responsibilities: Set up and operate HAAS CNC mill and lathe. Interpret blueprints, CAD models, and technical drawings to program and machine parts to specifications. Will create new versions of trackers as there is constant change in their portfolio. Perform routine maintenance and troubleshooting on CNC machines to ensure smooth operation. Monitor machine performance and make adjustments to ensure high-quality production. Inspect finished parts using measuring tools such as calipers, micrometers, and gauges. Follow safety procedures and maintain a clean work environment. Collaborate with engineering and production teams to optimize processes and improve product quality. Document and track production progress, including machine settings, tool usage, and material consumption.

Are you an experienced TIG Welder looking to join a dynamic and growth-oriented company? A leading aerospace manufacturer in sheet metal fabrication, is seeking a skilled TIG Welder to join their team. This position offers a fantastic opportunity to work in a supportive environment where precision and quality are a top priority. If you're ready to make an impact in a progressive company, we want to hear from you! Role & Responsibilities of the TIG Welder: As a TIG Welder , you will: Verify raw materials to ensure they meet the necessary specifications prior to welding. Visually inspect detail parts for any damage before initiating the welding process. Inspect all finished welds to ensure compliance with the Manufacturing Order Ticket (MOT) and/or Blueprint (B/P) specifications. Confirm proper welding rods are used according to color code specifications. Identify and tag rejectable items before submitting them to the Inspection department. Experience & Qualifications Required: The ideal candidate will have: 3-5 years of experience in fusion welding, with a strong focus on TIG welding. Ability to communicate effectively in English, both written and verbal. Technical proficiency in welding techniques and using measuring equipment. Ability to pass the standard welding qualification test (for .030 material thickness). Strong understanding of weld symbols and blueprints. Ability to lift 25 lbs. or more as required. Near 20/20 vision (20/30 for distance vision). Capability to pass color vision tests such as Pseudochromatic Plates, Dvorine, Ishihara, Richmond, Farnsworth Lantern, Keystone Orthoscope, and Titmus Vision Tests. What they Offer: Competitive compensation package based on experience. Opportunity to work in a collaborative and team-focused environment. Stable, long-term employment with opportunities for skill development and career growth after passing probation Comprehensive benefits package to support you and your family after 13 week probationary period If you're a motivated and skilled TIG Welder who is looking for a supportive and progressive company culture, apply today! And Mohamed Kulasi will be in touch within 1-2 working days.

**Travel Mig Aluminum Welder- Vancouver, Washington** Are you a skilled welder with a passion for travel and aluminum welding? We are looking for an experienced Travel Welder to join our team. If you have significant experience in aluminum welding, can describe your experience, and pass a weld test, we want to hear from you! **Responsibilities:** + Weld and fabricate aluminum components according to specific instructions. + Perform welding tasks in various positions. + Read and interpret blueprints for welding and fabrication tasks. + Pass fracture-tested weld tests. + Utilize MIG welding techniques and, preferably, pulse arc techniques. **Essential Skills:** + Experience in aluminum welding. + Proficiency in MIG welding. + Ability to weld in multiple positions. + Blueprint reading skills. + Capability to pass fracture-tested weld tests. **Pay:** $28-30/HR Starting + $150 a day per diem (7 days but must work all assigned shifts to receive 7 days) **Shift:** 4X10's Monday-Thursday (6am-4:30pm) **Additional Skills & Qualifications:** + Experience with pulse arc welding. + Familiarity with fitting, grinding, and tape measure usage. **Weld Test:** + Weld test at Vancouver facility Running uphill beads in 3G and 4G Aluminum weld test using MIG 3/64th wire to D1.2 standard (Pulse). + Weld together 5" long aluminum plates or coupons that is 3/8ths thick and there is no back-end strip and gouge it is just a v-groove and open back. + Visual test and break test to failure. **Why Work Here?** Join us for long-term employment stability as we work on the Maneuver Support Vessel (MSV) project, constructing 32 ships over the next 10 years. This is an excellent opportunity for candidates seeking a stable company with guaranteed work. We are open to candidates willing to permanently relocate. **Work Environment:** You will be working in a large-scale manufacturing environment that produces structural steel and aluminum parts for government projects, including bridges, dams, nuclear sites, boats, and barges. The shop is clean and primarily focused on aluminum work. Employees are required to wear steel-toed boots and safety glasses. **Pay and Benefits** The pay range for this position is $28.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Long Beach,CA. **Application Deadline** This position is anticipated to close on Apr 18, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Join our group of passionate team players, committed to providing the best level of service for our clients in a rewarding environment. WHO WE ARE: Founded in 1950, Empire Cat is a world-renowned Caterpillar dealer and a top private company in Arizona. We are a third-generation family-owned company with over 3,700 employees across 30+ locations throughout Arizona, Nevada and portions of Eastern California. We are a diverse group of people, but we all share an inspiring vision to BE THE BEST. That vision is achieved by our individual commitments to work hard and live our core values every day. WHAT WE OFFER: * Competitive Pay * Vacation & Sick Leave * Medical/Dental/Vision * 401(k) * Tool Discounts/Tool Insurance * Technical Training & Professional Development Classes * And More Empire technicians are the lifeline to our clients - trained professionals who work on machinery and equipment produced by Caterpillar, one of the leading large-scale mobile machinery manufacturers in the world. We are seeking seasoned shop and field technicians/mechanics with experience in similar heavy equipment dealerships to join our third-generation, family-owned organization. We have 100+ job openings throughout our 30+ locations in Arizona, Nevada, and parts of Eastern California. Join our team today! EXPERIENCE: Required: * At least six months of related experience in a similar role and environment. * Ability to speak, read, write, and comprehend English. * Keep safety as a priority in the work environment. * Ability to successfully complete a skills assessment. (eTRAIN test) * Valid driver's license. * Excellent client service skills. * Own and maintain required personal tools. Strongly Preferred: * At least five years heavy equipment technician experience, preferably in a dealership environment. * Caterpillar work experience. * Proficient rebuilding/repairing machinery including hydraulics, electrical, powertrain, engines, and Tier IV Emissions systems, failure analysis procedures, warranty claims procedures… If offered employment, the specific rate of pay and position grade will be determined based on applicable differentials and the candidate's level of experience and skill. JOB DETAIL: Shift Multiple Shifts Location In-Field Schedule Standard work schedule to be provided by leader. Salary Range $23.20 to $43.16 Per Hour FULL JOB SUMMARY: Repair and/or rebuild structurally failed or worn parts requiring welding process reconstruction. Work in adverse weather and other adverse shop and field situations presented by client needs. Accept all out-of-town assignments requiring overnight stays. Communicate orally and in writing information, instructions, and explanations to associates, clients, and management regarding conditions, problems, and recommendations. ESSENTIAL FUNCTIONS: * Fabricate and/or repair metal parts. * Comprehend and interpret sketches and diagrams. * Operate welding equipment. * Prepare service reports. * Plan and control cost of repair jobs. * Maintain company equipment - keep in good clean orderly condition. * Work safely at all times. Adhere to all applicable safety policies. Comply with all company policies, procedures, and standards. ADDITIONAL RESPONSIBILITIES: * Own and maintain required personal tools. * Learn and use Empire, Caterpillar and allied product procedures and systems. * Maintain current MSHA card if work area requires. * Provide on-the-job training to technicians and helpers as assigned. * Communicate with proper individuals to clarify instructions or discuss scope or progress of job. * Work overtime as needed. * Travel to remote locations as needed. * Perform other related duties as assigned. * Work within and promote corporate values. KNOWLEDGE SKILLS AND ABILITIES: * Perform complex and innovative welding procedures. * Appropriate manner, conduct, and grooming adhere to company policy. * Ability to work cooperatively and communicate effectively. * Able to read and correctly interpret diagrams & blueprints. * Basic knowledge of heat stresses in metal. * Know proper use of cleaners and solvents. * Must have acceptable attendance to meet all company standards and requirements. EDUCATION AND EXPERIENCE: * High school diploma or General Education Degree (GED). * Current driver's license. * Minimum of 6 months related experience. * Current AWS D1.1 and D14.3 certification. * Must be able to communicate (speak, read, comprehend, write) in English. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to sit, use hands, and talk or hear. * The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop and kneel. * The employee is regularly required to lift and/or move up to 25 pounds and occasionally required to lift and/or move up to 50 pounds. * Specific vision abilities required by this job include close, distance, and peripheral vision. * May be required to operate a forklift with appropriate certification(s). * Will be required to wear respirator and be cleared for respirator use by an approved medical provider. * This position is designated as a "Safety-Sensitive Position". A Safety-Sensitive Position includes tasks or duties that EMPIRE in good faith believes could affect the safety or health of the employee performing the task or others. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places, and outside weather conditions. * The employee is frequently exposed to wet and/or humid conditions, extreme cold, and extreme heat. * The noise level in the work environment is usually loud. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required of personnel so classified. The roles and objectives of this job do not include setting corporate policy and does not constitute a managing agent of the company. Empire Southwest is an equal opportunity employer. We evaluate applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. The "Know Your Rights" Poster is available here: Know Your Rights" Poster. The pay transparency policy is available here: Pay Transparency Nondiscrimination Poster-Formatted Empire is committed to working with and providing reasonable accommodation to individuals with disabilities. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the employment process, please call us at ************ or email us ************************ and let us know the nature of your request and your contact information. Empire Southwest is an EEO/Affirmative Action Employer Safety - Respect - Integrity - Teamwork - Excellence - Stewardship - Astonishment Other details * Job Family 602 Welders * Pay Type Hourly * Min Hiring Rate $23.20 * Max Hiring Rate $43.16 Apply Now * Henderson, NV, USA

Tanco Engineering is seeking a highly skilled and experienced Storage Tank Welder to join our team. As a company with over 40 years of excellence, Tanco Engineering has built a reputation for exceeding customer expectations through our commitment to safety, reliability, and excellence. We excel in health and safety performance, work quality, environmental stewardship, and customer service. As a Storage Tank Welder at Tanco Engineering, you will be responsible for performing a variety of welding tasks on storage tanks, ensuring their structural integrity and safety. You will play a crucial role in ensuring the highest standards of welding quality and adhering to all applicable industry codes and regulations. Join our team and become a part of a company that prides itself on delivering exceptional welding solutions to our clients. With Tanco Engineering, you will have the opportunity to work on diverse projects and be part of a team that values excellence and teamwork. **Current needs: NATIONWIDE!** Responsibilities Perform welding tasks on storage tanks, including using a variety of welding techniques such as stick and flux core welding. Ensure the structural integrity and safety of storage tanks through proper welding techniques and practices. Interpret welding blueprints and specifications to ensure accurate execution of welding tasks. Inspect welding work for quality control, identifying and addressing any defects or issues. Collaborate with team members to ensure the efficient completion of welding projects within specified deadlines. Adhere to all safety guidelines and regulations to ensure a secure working environment. Maintain welding equipment, troubleshoot issues, and perform routine maintenance. Requirements Minimum 1 years of experience as a welder, with specific experience in storage tank welding preferred. Certified welder with thorough knowledge of welding techniques, practices, and equipment. Proficient in reading and interpreting welding blueprints and specifications. Strong attention to detail and ability to identify welding defects or issues. Excellent manual dexterity and hand-eye coordination. Ability to work in a physically demanding environment and lift heavy equipment when necessary. Prioritization and time management skills to meet project deadlines. Strong communication and teamwork skills to collaborate with colleagues and support overall project objectives. Willing to travel. Benefits Health insurance Retirement plan Advancement opportunities Join our team and enjoy competitive starting pay of $30-$34 per hour, which may vary depending on your experience and the results of your welding test. In addition to the attractive pay range, we offer a subsistence allowance of $115 and reimbursement of $0.70 per mile for travel expenses (when applicable).

Fabricator/ Welder Information We are looking for a motivated, experienced welder to join our company as a Welder Fabricator. As part of our team of professional fabricators, you construct and manufacture metal parts and products, taking particular care to produce clean, polished welds. You follow blueprints, determine material measurements, and take responsibility for fabricating parts used in later assembly processes. You are responsible for the quality of your output, so you must be able to perform simple tests to ensure weld quality and tolerance. Some Diesel Mechanic Experience is helpful Hourly Pay Rate is negotiable, DOE More detailed information Position Details: Fabricator/ Welder for work on medium & heavy duty trucks, forklifts, tractors/trailers and other small equipment. Assist in and work independently as needed repairing and maintaining diesel trucks, power equipment, and other mechanical equipment Fabricate and manufacture metal parts for later assembly Follow blueprints to ensure exact specifications of output Produce strong, clean welds Test output to ensure strength and tolerance of welds Plasma and Oxy Acetylene torch, Mig Weld Steel. General equipment troubleshooting and maintenance: Diagnose malfunctions and perform repairs Maintain a safe, clean, productive and efficient work area including ensuring work area. Conduct all maintenance while remaining in compliance with all relevant Federal, State, local, and company guidelines and requirements May assist with road calls/repairs as necessary Record time spent, parts used and repairs and/or maintenance conducted in computer system as required by departmental/company policy Experience/Skills: Prior experience welding, preferably in a manufacturing environment Familiarity with common welding tools and procedures, including MIG welding TIG welding, metal fabricating, grinding, and finishing metals Ability to stand, crouch, and occasionally lift heavy equipment Blueprint reading and knowledge of common welding symbols Must have knowledge/experience/skills with the following: Qualifications: 2 years of experience as a diesel engine/heavy truck Welded/Fabricator Must be safety minded Must work well with others as well as independently This position works in EXTREME Temperatures and is very weather-dependent Physical Requirements: Ability to lift 50 pounds frequently throughout an 8 hour work day Ability to drive on company business and be MVR approved 3 years' experience working with commercial landscape and computerized irrigation systems. 100% standing, bending and stooping Weather dependent temperatures (cold in the winter and hot in the summer) 85% of the work day is outside in the elements Additional information: Full Time The work requires moderate-heavy physical exertion Applicants must be physically fit and be able to lift, push, pull, and/or carry 70 lbs. Pre-employment drug screening required (Safety Sensitive Position) Excellent benefit package EOE E-Verify Participating Company Must have fleet truck experience Will consider education equivalent or combination of both Welding test required for employment

The Welder-Fabricator is responsible for skillfully using various techniques and tools to shape, join, and manipulate metal materials, under the direction of the Engineering Manager. They will work with technical drawings, blueprints, and specifications in order to create metal structures and products. Attention to detail is crucial in this job, as even small mistakes can compromise the integrity of the finished product. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each of principle duties and responsibilities satisfactory. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL JOB FUNCTIONS: As a Welder/Fabricator, you will work with different welding techniques such as TiG and MiG welding to weld a variety of metals, such as steel, stainless steel, and aluminum to create a range of parts and assembled equipment that meet required specifications You will also perform tube and pipe welding MS In this role, you will be responsible for building simple and complex fabrications based on prints such as Decks, Railing, Frames, Piping and Hoppers from sheet metal and plate You will also work with other machines such as an ironworker and saw, and will be responsible for ensuring correct punches based on material thickness and type, and checking your work using scales, square, template, or samples to ensure it matches the cut list, and deburring all parts Individuals invited to interview for this role will be required to perform a weld test, which will include 2G and 2F positions on mild steel and stainless steel, using MIG, TIG, and fluxcore, The hours for this role are Monday-Friday, 8:00 a.m. - 5:00 p.m., depending on company's needs the role may change to a four on, three on 12 hour shift covering one weekend day. Incumbents will complete tasks that require finger dexterity, reaching, handling of materials and equipment, talking, hearing, and near and far sight At times the individual in this role may be required to kneel, stoop, and/or crouch The role may require the employee to work near moving mechanical parts, and may occasionally expose the employee to fumes and/or airborne particles This role required the incumbent to wear eye, hearing protection and safety shoes. KNOWLEDGE, SKILLS AND ABILITIES: Experience using precision measuring hand tools (calipers, micrometers) Knowledge of proper handling of propane and pressurized gas cylinders Strong time-management skills Ability to communicate effectively in written and spoken English Ability to self-manage behavior Ability to read, analyze, and interpret supplied documentation and instructions (including blueprints) Satisfactory results from a pre-employment fit-for-duty screen and a drug screen Hearing and eye protection is required at all times while on the shop floor The desire to learn other trades as part of project build designs, plumbing, electrical, piping. This role is not in a traditional fabrication house but will be part of engineering team to support production and machine installations/automation projects in a production environment. Portfolio of work is encouraged for interview process. Light machining skills a plus. EDUCATION AND EXPERIENCE High school diploma or GED (3) years of experience in a welding and metal fabrication environment Experience with TiG and MiG welding. Experience with small and large, complex fabrication. Experience using various hand-tools, power tools, and load-moving equipment (i.e. pallet jack, dolly, forklift, etc.) Experience using precision measuring hand tools (calipers, micrometers). PHYSICAL REQUIREMENT: The physical demands here are representative of those that must be met by an Employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the Employee will require to regularly lift and/or move up to 30 pounds, frequently lift and/or move up to 40 pounds, and occasionally lift and/or move up to 50 pounds. 0-24% 25-49% 50-74% 75-100% Seeing: X Hearing: X Standing/Walking/Mobility: X Sitting: X Climbing/Stooping/Kneeling/Bending X Lifting/Pulling/Pushing: X Grasping, using hands, arms, fingers. X Communication: X Note: The statements herein are intended to describe the general nature and level of the work being performed by employees assigned to this position. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. ************************

Nikkiso Clean Energy & Industrial Gases is a leading provider of cryogenic pumps, heat exchangers, process systems, turboexpanders, services, and solutions for the liquefied natural gas (LNG), liquefied hydrogen (LH2), and industrial gases industries. Applications include fueling stations, marine engines, peak shaving, power generation, virtual pipelines, carbon capture, geothermal power and well stimulation. We are a subsidiary of Nikkiso Company Ltd, a leading industrial manufacturer headquartered in Tokyo, Japan, with $1.5 B USD in annual revenue, 8000 + employees worldwide, and publicly traded on the Tokyo Stock Exchange. Job Overview Nikkiso Fueling & Solutions designs and constructs alternative fuel stations for fuels such as liquefied natural gas (LNG), compressed natural gas (CNG) and hydrogen (H2). Typical projects involve reinforced concrete mat foundations, installation of 45 ft. vertical or horizontal storage vessels, cryogenic and high pressure systems, ASME B31.3 pipe welding, process system installation, and hazardous area (CL 1 Div. 1 & 2 Group B or D) electrical work. We have an immediate need for an experienced Welder/Pipefitter to work on our requirements in the rapidly growing alternative fuel market. Our projects are typically design/build projects. We self-perform all engineering and specialty construction. Because we have a reputation of getting the job done, we are requested to do unique, one of a kind projects. Salary Range:$24 To $30 Per Hour Responsibilities Stainless tube (1/4" - 3/4") installation Stainless and carbon steel threaded pipe (1/2" - 2") Stainless and carbon steel welded pipe per ASME B31.3 Pipe support and process skid installation GTAW and GMAW in 6G position Read blueprints and drawings and take or read measurements to plan layout and procedures Determine the appropriate welding equipment or method based on requirements Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Repair machinery and other components by welding pieces and filling gaps Test and inspect welded surfaces and structure to discover flaws Maintain equipment in a condition that does not compromise safety Qualifications Graduate of high school or GED Trade school and welding certificate preferred Satisfy pre-employment and random drug screening tests 5 + years of welding experience, preferably in stainless steel and carbon steel piping/pressure vessels Ability to pass NDT on weld performed in 6G position Complete understanding of blueprints and ability to work from written and verbal instruction Demonstrated ability to perform the job in a highly capable manner with minimum supervision Thorough experience using a wide variety of hand tools and capable of fitting and setting up details required for fabricated assemblies Knowledge of basic computer operation EEOC Statement Equal Opportunity Employer/Veterans/Disabled Nikkiso CE&IG is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Labor One is currently hiring Aluminum Structural Welders in San Diego, CA at a Shipyard. Pay rate is up to $25 + $160 perdiem, if eligible. Job Requirements: Three years of experience in Aluminum welding and flux core arc welding processes. Proficient in flat, vertical, overhead, and horizontal. Ceramic Tape experience is required. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

SUMMARY/OBJECTIVE The Pipe Welder JM2 assist pipefitter with fit-up of piping systems, accomplish welding piping onboard ship and shop fabrication for P- 2 piping. Welding need to pass all NDT's including hydrostatic testing. For production of Navy ship repair and other marine and commercial equipment. Pipe Welder JM2 must possess trade specific tools. ESSENTIAL FUNCTIONS / DUTIES Setup welding equipment Certified for all P-2 piping All welding must pass ndt's Fit and Tack parts together in preparation for welding Perform precise fitting work on components Running lines and leads Blueprint reading and interpret weld symbols Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. Ensure that employees assigned with Firewatch duties are in place and ready prior to begin hot work Fill out Job JSA forms Must adhere to a promote ALL company safety policies. Wear all required PPE when in Production areas and promote a clean and safe work environment. PHYSICAL DEMANDS The Pipe Welder JM2 must be able to meet and successfully perform the essential functions of this job. The following physical demands are representative to the position. The position is active and requires extensive standing, walking, sitting, bending, kneeling, stooping, crawling, climbing, and crouching. Along with such movements, employee is required to lift parts/machinery of up to 75 pounds. Additional demands are listed below: Able to climb ladders and work off scaffolding Able to lift, carry, and or push up to 50 - 75 lbs. throughout the shift (including overtime) * Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions KNOWLEDGE / SKILLS Must be certified in Pipe Welding Ability to weld in all positions Ability to troubleshoot minor welding equipment problems Must be able to evaluate the use of various resources and make knowledgeable decisions regarding safety and company procedures and policies Able to read a tape measure Pass Welder Workmanship Training (WWT) Able to operate sawzall, 4” & 7” grinders, and various other tools Able to use Weld Gauges COMPETENCIES Communication Proficiency Flexibility (Job duties & schedule) Work well with others in all areas where SCW&M is performing work Follow verbal/written instructions Teamwork orientation SUPERVISORY RESPONSIBILTY Pipe Welder JM2 position has no supervisory responsibilities. POSITION TYPE / HOURS OF WORK This is a full-time position, 40 hours per week. Schedule is Monday- Friday, 6:00 a.m. to 2:30 p.m. / 2:30 p.m. to 11:00 p.m. (swing shifts dependent on work load). Occasional overtime and weekend work may be required based on production needs. REQUIRED EDUCATION AND EXPERIENCE Must be certified Pipe Welder Must have a minimum of 1-2 years of ship repair experience and/or skill set. Must be able to speak and understand Basic English Work Authorization Clearance For E-verify and contract security purposes (including ship access lists), all employees MUST present a valid export document. Acceptable documents are U.S. Birth Certificate, Certificate of Naturalization, Passport, Passport Card and Permanent Resident Card. Other Please consider that duties, responsibilities, and all other points specified in this description can change at any time with or without notice. Safety and responsible work practices are of SCW&M importance in everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success!

CTR Group is seeking several Pipe Welder’s local to the San Diego, CA area. Immediate openings and urgently hiring! What We Offer: Weekly Pay – you receive a paycheck every week Comprehensive Benefits Package Safety First! RESPONSIBILITIES: (may include but are not limited to) Read and interpret basic drawings and weld symbols Pass weld test for all Company weld procedures in the 6GR position Pass Company TIG weld test procedure for Carbon Steel, SS and CUNI pipe Work to Company housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor Continuously improve communications and flexibility within the team Help build the team environment Build pride of workmanship and quality through on job training Contribute towards innovation / productivity improvements Assist in the control of waste elimination, e.g. materials, consumables etc Assist supervisor to maintain control of department equipment and its maintenance Must have full set of personal tools Work towards the team goal of delivering the vessel on time Always be ready to start shift on time Follow Company guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage REQUIREMENTS: (may include but are not limited to) Must be able to TIG Carbon, Stainless steel, and Copper Nickle Pipe Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel Must have the ability to bend, squat, stoop, crawl, and kneel Perform prolonged standing Ability to turn head from side to side and about the vertical axis Lift/push/pull 50lbs on an occasional basis Lift/push/pull up to 20lbs on a frequent basis Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps) Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts Able to work at a variety of levels (ex. waist, eye, overhead) Demonstrate the ability to safely and appropriately use required tools and equipment Demonstrate good balance while working on uneven surfaces and maneuvering obstacles Possess sufficient handgrip and coordination to carry and operate tools and equipment Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards Ability to withstand cold and hot temperatures Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines Able to respond to verbal and audible sounds/commands Able to utilize adequate visual skills Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Must be able to tour all vessels and work sites While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear The employee is occasionally required to sit Candidates must meet the following employment eligibility guidelines to be considered for employment: 18 years of age or older at time of application Able to provide proof of US Person Status Willing to submit to a drug screen Willing to submit to a background check Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Essential Duties and Responsibilities include the following. Must be able to pass a stick 6G pipe test with 6010 root and 7018 hot pass and cap. Must be able to perform basic math and read a tape measure. Pipe fitting experience is a plus. Other duties will be assigned as needed. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations to enable individuals with disabilities to perform these essential functions. Education and/or Experience: High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively with employees and supervisory personnel. Mathematical Skills: Ability to work with mathematical fundamentals of plane and solid geometry. Ability to measure, layout and use basic math skills working with fractions and decimals. Reasoning Ability: Ability to solve practical problems and deal with a variety of situations. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Other Skills and Abilities Knowledge of occupational hazards and safety precautions applicable to the welding trade. Skill in the welding of ferrous and nonferrous metals. Ability to read and independently work from plans, sketches, diagrams, and blueprints. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand for more than 8 hours per day; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder level; climb or balance; stoop, kneel, crouch or crawl, and talk or hear. The employee must regularly lift and/or carry up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and outside weather conditions. The employee is frequently exposed to high, precarious places, fumes or airborne particles and extreme heat. The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, risk of electrical shock and vibration. The noise level in the work environment is usually loud. ,

Job Title: Pipe Welder - Commercial Plumbing Tempe Mechanical is growing, and we need you! We offer competitive pay, a full range of benefits, PTO, sick time, company events and more. Join our team today! Our Mission and Vision To Empower people, families, and clients by creating a workplace where tradesmen and women can learn and develop essential life skills. To raise a community of skilled people that will build the future and improve the quality of life for individuals and organizations. Your Purpose in this Role We are one of the top premier Commercial HVAC and Plumbing Contractors in the state of Arizona. We are looking for growth-motivated and self-starting individuals who value efficiency, reliability, and family. The ideal candidate will be responsible for performing various welding tasks with precision and efficiency. You will work with a variety of materials, interpret blueprints, and utilize carious welding techniques to produce high-quality products. Pay $40- $65 - Pay Rate Determined Upon Interview and Experience. Your Duties and Responsibilities * Perform welding tasks using various techniques, such as MIG, TIG, and Stick welding. * Interpret and follow engineering drawings, blueprints, and specifications to ensure accurate and quality welds. * Prepare materials for welding by cleaning, cutting and shaping components. * Ensure proper fit and alignment of welded parts, making adjustments as necessary. * Identify and repair any defects or imperfections in the welding process. * Work closely with other team members and departments to achieve project deadlines. Qualifications * Proficient in various welding techniques. * Strong attention to detail and precision work. * Ability to work independently and as part of a team. * 3-4+ Years of Welding Experience. * Will need to clear a background check as this job requires work to be performed on government job sites that need clearance. * Willing to work occasional nights, weekends, etc. * 6G Certified/Ability to pass welding test Reports To Ron Turrell and General Foreman Benefits * Medical Insurance * Dental Insurance * Vision Insurance * Life Insurance * Profit Sharing Retirement Plan * ZayZoon - Wages on Demand * 6 Paid Holidays * 48 Hours of Paid Time Off * 40 Hours of Sick Time Location / Travel * Travel to job sites across the Greater Phoenix Area. * Corporate Office: 303 W Elliott Rd, Ste 101, Tempe, AZ 85284 Our Promise We're an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

The College of Southern Nevada appreciates your interest in employment at our growing institution. We want your application process to go smoothly and quickly. We ask that you keep in mind the following when completing your application: * Once you start the application process you cannot save your work. Please ensure you have all required attachment(s) available to complete your application before you begin the process. * Required attachments are listed below on the posting. Your application will not be considered without the required attachments. * Please note that applications must be submitted prior to the close of the recruitment. Once a recruitment has closed, applications will no longer be accepted. If you are unable to attach the required documents to your online application or need assistance regarding the application process, please contact the Talent Acquisition team within Human Resources via email at ********************** or call ************** to be directed to the appropriate Recruiter. The College of Southern Nevada appreciates your interest in employment at our growing institution. We want your application process to go smoothly and quickly. We ask that you keep in mind the following when completing your application: * Once you start the application process you cannot save your work. Please ensure you have all required attachment(s) available to complete your application before you begin the process. * Required attachments are listed below on the posting. Your application will not be considered without the required attachments. * Please note that applications must be submitted prior to the close of the recruitment. Once a recruitment has closed, applications will no longer be accepted. Job Description Teach WELD 100B - Introduction to Welding classes through the CSN Jumpstart Program at your High School. * Instruct students in accordance with curriculum standards and objectives. * Demonstrate and assist students with lab procedures and ensure adherence to safety precautions. * Independently evaluate student mastery of skills and competencies required by course outcomes. Make necessary provisions to meet learning needs. Required Qualifications: * Applicants must be pre-approved by the Department of Applied Technology and the Jumpstart Program before submitting an application in Workday. * 5 years of work-related experience. Preferred Qualifications: * CWE, CWI, SCWI, NDT Certifications, NCCER Instructor Credentials, OSHA 10, 30. * Welding Technology degree * One-year equivalent full time teaching experience * Knowledge of computer classroom technologies * Knowledge of Canvas or other Learning Management Systems Jumpstart Salary $200.00 per class per semester Please Note: This job announcement is not an offer of employment. It will be open for a period of one year and has been established to collect a robust candidate pool for part-time positions that may become available within the designated discipline at CSN. If a part-time position becomes available within the discipline, the department will review the application material of the candidates who have applied and will invite select candidates to interview based on their qualifications. Should a candidate be selected for a part-time instructor position, no minimum course load is guaranteed and teaching assignments, if any, are contingent upon various factors, including but not limited to, minimum student enrollment and/or department need. No reimbursement for travel expenses will be provided to local or out of area/out of state candidates and there is no guarantee of continued or future part-time and/or full-time employment. Exempt Yes Full-Time Equivalent 0.0% Required Attachment(s) Required Attachment(s) To be considered for this position, please upload the following documents to your application: * Resume /CV * Cover Letter * Unofficial College Transcripts NSHE - INTERNAL APPLICANTS PLEASE NOTE CSN employees or employees within the Nevada System of Higher Education (NSHE) MUST use the "Find Jobs" process within Workday to find and apply for jobs at CSN and other NSHE Institutions. Once you log into Workday, type "Find Jobs" in the search box which will navigate to the internal job posting site. Locate this specific job posting by typing the requisition number in the search box. If you complete an application outside of the internal application process and apply as an external candidate, your application will no longer be considered at the time of minimum qualification review. In order to prevent the disqualification of your application, you will need to reapply as an internal candidate before 11:59 pm the day prior to the position close date. For more details on this position, please visit our website: My Career at CSN. CSN is an Equal Employment Opportunity/Affirmative Action institution. For more information, visit ************************************* Posting Close Date 06/30/2025 Note to Applicant Applicants should fully describe their qualifications and experience with specific reference to each of the minimum and preferred qualifications. The search committee will use this information during the initial review of application materials. All document(s) must be received by 11:59 p.m. the day prior to the closing date posted on the job announcement. This position may require that a criminal background check be conducted on the candidate(s) selected for hire. As part of the hiring process, applicants for positions in the Nevada System of Higher Education may be required to demonstrate the ability to perform job-related tasks. Schedules are subject to change based on organizational needs. CSN is responsive to serving the educational needs of a diverse and ever-changing community. CSN employs only U.S. citizens and aliens authorized to work in the U.S. CSN does not sponsor aliens applying for faculty, professional staff, or management positions (H-1B Visas) in the absence of exceptional circumstances as defined by the USCIS.

RMS Energy Co., LLC is a nationwide provider of turn-key services to the power industry. From routine maintenance, inspection, and repairs to equipment design, engineering, and installation, RMS Energy offers a variety of solutions to fit the power-related needs of our customers. For more information about RMS Energy, please visit ****************** To help facilitate our expanding business, RMS Energy is currently seeking Welders and Field Technicians to join our dynamic and fast-growing team. This is a unique opportunity to further your experience working on electrical equipment in diverse locations across the United States, including power plants, hydroelectric dams, and other large industrial facilities, with a focus on systems such as Isolated Phase Bus Ducts, Non-Segregated Bus Ducts, and Generator Circuit Breakers. Our Welders and Field Technicians will be responsible for all mechanical aspects of projects including demo of old equipment, layout, rigging/setting of new equipment, and welding of aluminum conductors. Preferred Locations: Portland, OR and Pheonix, AZ. Responsibilities: Ability to work independently with minimal to no supervision. Work effectively alongside assigned team or crafts as required. Communicate effectively with verbal and/or written communication. Interpret construction, welding, and electrical drawings, and take or read measurements according to plan layout and procedures. Determine appropriate welding equipment or method based on the requirements of the job. Set up components for welding according to detailed specifications. Rig, lift, set, align, and fit equipment in position according to drawings and specifications. Weld Aluminum components in various positions (vertical, horizontal, or overhead, 6G test required). Maintain equipment in a working condition and inspect daily for damage or safety concerns. Inspect, inventory, and organize parts and components for installation. Perform maintenance on and Inspection of existing, aging equipment for defects, damage, and deterioration. Operate electrical test equipment including Hi-Pot, Ductor, Megger. Fill out daily timesheets and job reports as needed. Operate company vehicles safely and within company policy. Other duties as assigned. Qualifications: 3+ years' experience welding aluminum components. 3+ years' experience using a variety of welding equipment and procedures (TIG and MIG). Familiar with medium and high voltage electrical equipment. Ability to read and interpret technical documents and drawings. Knowledge of OSHA safety standards and proper use protective equipment, working at heights, etc. Substation construction or electrical bus installation preferred. Experience operating equipment, including forklift, manlift, etc. Other Requirements: Up to 75% travel required throughout the continental USA. Minimum of a high school diploma or GED; community college or technical school a plus. Ability to pass company drug and alcohol screening and background check. Valid and current driver's license with clean driving record. Benefits: Competitive compensation. Flexible work environment. Generous medical, dental, and vision benefits at the start of the month following hire date. Safe harbor 401(k) plan with a 3% non-elective contribution and free investment consultation. Generous paid vacation, holidays, and sick time. Educational Assistance Program, to include paid memberships in professional associations, conference and training opportunities. Employee Assistance program which offers support on finances, legal, and counseling. Wellness incentives through our healthcare provider. Fast growing company with great potential for career growth. Working Conditions: This job requires the ability to respond to 24/7 call outs and to work extended hours, including evenings, nights, weekends, and holidays, as needed. Work may be conducted outdoors in all weather conditions, near low-, medium-, and high-voltage equipment and heavy machinery, in areas with elevations in excess of 100 feet, and confined spaces adhering to strict safety protocols. Exposure to loud noises from machinery is common, necessitating the use of personal protective equipment (PPE). This job involves risk of electrical shock. This job requires frequent travel between RMS facilities and customer sites. Physical Requirements: The position demands physical mobility to navigate uneven surfaces, the ability to lift and carry up to 50 pounds regularly, fine motor skills for handling small components and tools, and the capability to climb ladders and work at heights. Sustained physical effort, including standing, bending, pushing, digging, pulling, kneeling, crawling and reaching for extended periods, is required. Good vision, including color vision and depth perception, and the ability to hear alarms and communications in noisy environments are essential. Additionally, proficiency in speaking, hearing, reading, and typing in English is required for effective communication and documentation. At RMS Energy, we celebrate diversity and are committed to creating an inclusive environment for all employees. We believe that a variety of perspectives drives innovation and success. As an Equal Opportunity Employer, RMS Energy is dedicated to employing the best people, regardless of race, color, ethnicity, national origin, age, religion, disability, marital status, gender, sexual orientation, gender identity or expression, genetic information, or any other factor protected by law. Our inclusive policies ensure that every team member has equal opportunities for growth and advancement, fostering a workplace where everyone can thrive. Join us in powering a diverse and equitable future! No Agencies Please. Any unsolicited resumes sent to RMS Energy from a third party, such as an Agency, including unsolicited resumes sent to RMS Energy mailing address, fax machine or email address, directly to RMS Energy employees, or to RMS Energy resume database will be considered RMS Energy property. RMS Energy will not pay a fee for any placement resulting from the receipt of an unsolicited resume.

PVB Fabrications, Inc. (PVB), is a leading direct-hire, multi-disciplined industrial construction services, and metal fabrication company. With a commitment to excellence and innovation, we specialize in delivering high-quality solutions to our clients in various sectors including mining, heavy industrial, utilities, and government. As we continue to expand our operations, we are seeking a skilled and dedicated 6G Pipe Welder to join our team. Type: Full-time Schedule: Monday-Friday, day shift. Occasional overtime and/or weekends as needed. Basic Job Responsibilities Read and interpret shop drawings, isometric drawings, and welding procedures to determine welding requirements. Fabricate piping systems on carbon steel, stainless steel, and various alloys. Fabricate tank and pressure vessels using the appropriate hand tools and positioners. Conduct visual inspections of welds to ensure they meet quality standards and specifications. Operate heavy steel fabrication machinery. Collaborate with team members to plan and execute welding projects efficiently and effectively. Maintain a clean and organized work area. Adhere to and follow all safety rules and PPE requirements. Perform other duties as assigned. Skills & Qualifications Must be able to pass a 6G welding test. Proficient in ASME process piping using GMAW/FCAW-G and GTAW on carbon steel and other alloys. Ability to pass x-ray and Phased Array Ultrasonic Testing in accordance with ASME. Previous experience with tank and pressure vessel fabrication. Be a forward-thinking individual and a self-starter. Ability to work well with others and take instruction from supervisors. Experience with standard shop equipment including overhead cranes. Must pass pre-employment substance abuse testing. PVB offers a competitive salary commensurate with experience, and a competitive and comprehensive benefits package which includes: 401(K) retirement plan with company matching Medical insurance Dental insurance Vision insurance Short-Term & Long-Term disability insurance 8 paid holidays per year If you are a skilled 6G Pipe Welder looking to join a dynamic team at the forefront of industrial construction and metal fabrication, we want to hear from you!