Welder Jobs in Westerly, RI

We are excited to be hiring a Skilled Operator. This individual is responsible for the safety, quality and productivity of the machine. This position is also responsible for timely processing of customer orders and flow of material, contributing to process efficiency. Will be responsible for a variety of daily tasks including welding, painting, packing, and testing products. Previous welding experience a plus! Responsibilities Receives instructions, material requirements, prints, and work orders for the job. Plans details of working procedure. May perform welding duties and operate welding equipment. Performs routine maintenance and machine set-up when necessary. Operates machine to perform necessary job on parts according to instructions and to blueprint specifications. Performs first piece inspection using one or more method to assure all dimensions are correct and within given tolerances. Makes fine adjustments to machine to bring part within tolerances. Places finished material on a pallet or in a container with the work order and piece part number. Moves material to next destination and stages as required. Desired Experience Familiarity with welding operations and ability to operate various welding equipment. Ability to lead by example, coach and train Can read productions and log required documentation accurately Above average knowledge of machine process and steel defects Ability to write accurate reject reports Ability to deal with problems involving a few concrete variables in standardized situations Ability to read blueprints and comprehend instructions and short correspondence Ability to perform all required quality checks and surface inspection of material The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 70 pounds Specific vision abilities required by this job include ability to see small detail, depth perception, and the ability to adjust focus Required OSHA safety training Must have a valid driver's license Pay is based on experience: $20-$24 per hour plus $2 per hour shift differential for 2nd shift.

The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems. * Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites; * Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems; * Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press); * Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. * Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. * Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. * Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld. * Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. * Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. * Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. * Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. * Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. * Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. * Fill holes, and increase the size of metal parts. * Detect faulty operation of equipment or defective materials and notify supervisors. * Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. * Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. * Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. * Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. * Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. * Mark or tag material with proper job number, piece marks, and other identifying marks as required. * Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. * Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. * Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. * Preheat work pieces prior to welding or bending, using torches or heating furnaces. * Hammer out bulges or bends in metal work pieces. * Develop templates and models for welding projects, using mathematical calculations based on blueprint information. * Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. * Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. * Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials. * Set up and use ladders and scaffolding as necessary to complete work. * Use fire suppression methods in industrial emergencies. * Detect faulty operation of equipment or defective materials and notify supervisors; * Direct helpers or apprentices in appropriate tasks; * Must maintain strict adherence to safety rules and quality; * Participate in site housekeeping; * Interact with co-workers in an attentive courteous manner; * Additional duties as directed by management. Qualifications SKILLS & EXPERIENCE/REQUIREMENTS: * Ability to work independently or as part of a team; * Experience: 5 years of Field Experience, trade school or apprenticeship; * Knowledge of materials, methods and tools involved in industrial construction; * Attention to detail; * Ability to keep hand and arm steady; * Be highly focused on customer satisfaction expectations; * Good documentation and record keeping; * Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; * Competency in Permit Required Confined Space; * Understanding of and strict adherence to daily Job Hazard Analysis (JHA); * Appropriate state certification or license; * OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: * Industrial manufacturing facilities Power generating facilities * Chemical manufacturing Healthcare & Institutional * Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces

Who said you can't join a leading company with decades of success? Partner with Staffmark and we will connect you with our local client with over 40 years of growing success! We are seeking to fill a TIG Welder position in Putnam, CT. Bring your hard work, efficiency, and dedication to learn and immerse yourself in a team environment with advancement opportunities, where you can reach new heights in your career. Schedule: Three shifts available Pay rate: $19 - $30/hr. Essential tasks: Perform TIG welding on stainless steel, aluminum, and other alloys while interpreting engineering drawings and blueprints. Set up and maintain welding equipment, conduct quality checks to ensure industry standards are met, and follow all safety protocols. Maintain a clean workspace and collaborate with team members to achieve project goals and deadlines. Qualifications: * 5+ Years of TIG welding experience * Experience welding high nickel alloys (0.060" - 0.25" Thick) * 2+ Years of fabrication experience Our client offers tons of perks! * Competitive salary * Health, dental, and vision insurance * 401(k) retirement plan * Paid time off and holidays * Career development opportunities At Staffmark, we value you and the shared future success we hold together. If you're ready to embark on a journey that creates opportunities for every stage in your career, then click "Apply Now." We are eager to connect with you! The base pay range above represents the low and high end of the base compensation range we reasonably expect to pay for this position. Actual base compensation will vary and may be above or below the range based on various factors including, but not limited to, geographic location, actual experience, and job performance. This job posting is not a promise of any specific pay for any specific employee. After you have applied, download our Staffmark Group WorkNOW App to receive real-time job offers and apply for additional opportunities. You can download it from the App Store or get it on Google Play.

As a family-owned and operated company, we feel a special obligation to the employees who comprise our Taco family. We are committed to offering employees access to the tools necessary to live long and productive lives. We strive to instill in all of our employees: A positive mental attitude that helps us to be a leader in the industry A commitment to building strong relationships, both inside and outside the organization A desire to learn, grow, and contribute to moving our strategy forward A need to create and to innovate Employment Type: Regular Full-Time Hourly Shift: 2nd Shift Work Status: Onsite Position Summary The Welder Fitter A performs a wide variety of complex and customized welding duties on standard and custom engineered parts. They perform very complex custom weldment fit up on tanks and heat exchangers of all sizes and weights using the gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding process. This role directs other team members on their tasks when working in tandem on the same vessel and they perform the most complicated and dangerous rigging tasks when moving large vessels. Measures of success: Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within Timely completion of all welding operations within the operational time limits and according to Taco's quality protocols Successfully troubleshoot complex welding and fit-up issues independently Responsibilities Responsibilities include but are not limited to: Works independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Will fit up and fully weld the most complex heat exchangers and tanks including custom fabrications and extremely complex tanks, with minimal guidance by reading and interpreting standard and custom part drawings. This can take place at elevated heights, while working on top of tanks or from elevated work platforms. Completes the most complicated welding repairs and performs final welding operations on complex weldments as needed. Must be able to perform confined space welding as needed. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal, vertical and overhead positions, on both steel and stainless-steel materials. Will weld full penetration welds on small diameter pipe using the GMAW process. Must be able to use a scissor lift when needed to access welding work at heights. Interacts with the Engineering team on designs and fabrication challenges as needed. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Performs the most complex lifting/rigging activities using 10- & 20-ton cranes. Monitors quality of work, makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to supervisor. Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions. Ensures their own safety and that of team members. Troubleshoots engineering drawings and reviews with management when issues are identified. Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices. Qualifications Required: High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless Flat, horizontal, vertical and overhead positions With or without backing Small pipe diameter in rotated horizontal position 7+ years of welding experience using drawings, specifications, charts and welding equipment Strong knowledge of shop math and basic geometry concepts Must be proficient in numerous welding procedure specifications including small pipe qualification and various welding positions Ability to follow verbal and written instructions and effectively apply to assigned work Ability to navigate multiple windows in company ERP system to access production and resource data Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Ability to manage time effectively to meet strict time deadlines and production volumes Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance Travel: minimal to none Preferred: Graduate of a welding and fabrication vocational or technical training program 3+ years of experience in a pipe, pressure vessel or structural welding shop Work Environment This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas. This position requires extensive physical labor and the ability to work off ladders, work platforms etc. This position also requires occasional work in confined space. This position reports into the site every day. Management This position has no direct reports. Full compensation packages are based on candidate experience and certifications.Salary range$35.68-$38.30 USD Benefits With nearly 1,000 people working at Taco worldwide, each with their own story, you will discover a sense of community and diverse, intelligent colleagues who help us innovate, create and explore. Taco employees benefit from a company that: Provides competitive salaries and benefits Offers tuition reimbursement, career development, and on-site training programs in our learning center Believes in sharing profits with its employees Is mindful about family, health and well-being Fosters conditions that allow people and communities to reach their full potential Embraces and celebrates diversity #TacoComfortSolutions

CTR Group is seeking a MIG Aluminum Welder for our client in Somerset, MA. Immediate openings and urgently hiring! What We Offer:Weekly Pay – you receive a paycheck every week Comprehensive Benefits Package Safety First! PAY: $29 to $33 depending on experience RESPONSIBILITIES & REQUIREMENTS: (may include but are not limited to) Perform MiG welding on aluminum materials. Fabricate, assemble, and repair metal components for ships, yachts, and other marine structures. Read and interpret blueprints, technical drawings, and specifications. Operate welding equipment, grinders, and cutting tools. Maintain and repair welding equipment as needed. Follow safety protocols and environmental regulations. Proficiency in MiG welding techniques. Ability to work in various positions (flat, vertical, overhead). Strong understanding of marine welding standards and practices. Experience with tools like grinders, saws, and cutting torches. Attention to detail and commitment to producing high-quality work. About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

The Welder will perform torch and plasma cutting operations, along with fitting, tacking, and MIG welding carbon steel in vee groove and full penetration bevel joints on a variety of parts. Must be qualified for 2G and 2F. Also expected to utilize shop equipment to cut, punch, drill, grind, blast and paint as required. Key Responsibilities * Work from weld data sheet and procedures, operation traveler, prints and oral instructions. * Use turntable or lathe for circular parts or use weld bench to set up fixtures or layout and build makeshift fixturing. * Visually check parts in preparation for welding, cleaning weld area of oil, dirt, rust and burrs. * Check dimensions to ensure parts are within print dimensions. * Prepare parts for welding using square, tape or scale centering heads and compass components following weld parameters. * Use temp sticks to ensure specified heat and weld components in one or multiple passes to produce welds with proper penetration, free from burn through, cracks, porosity and heavy bead. * Deburr and grind off slag and excessive weld, as necessary. * Repair defective welded parts using grinding wheels, cutting wheels, pencil grinders, or chisels to remove material to root of imperfection or to base metal and re-weld according to weld specifications. * Perform torch and plasma cutting on carbon steel. * Use various measuring devices to ensure work is to print specification including, but not limited to, coordinate measuring machine, machinist square, micrometers, verniers, thread and plug gauges. * Use crane, dollies and carts to obtain and return material to and from storage area and move completed job to next operation. * Store all tooling, fixtures and additional point-of-use items in an organized manner, in drawers, on work bench etc. with proper labels, color coding, floor marking or other identifying mechanism. * Maintain work area as well as machines, tools, and equipment to meet program requirements. * Perform all job functions in accordance with established operating procedures. * Identify and assist in remediation of any and all safety hazards in the work place. * Perform other duties as directed by Team Leader/Supervisor. Skills, Knowledge & Expertise * Welding Proficiency: Ability to interpret and follow weld data sheets, procedures, operation travelers, and prints. * Fixture Setup & Layout: Experience using turntables, lathes, and welding benches to set up fixtures or create makeshift fixturing. * Precision Measurement: Proficient in using measuring tools such as micrometers, verniers, machinist squares, and coordinate measuring machines. * Welding Techniques: Ability to weld using specified heat, ensuring proper penetration, avoiding burn-through, cracks, and porosity. * Material Handling: Experience using cranes, dollies, and carts to transport materials safely. * Workplace Organization: Ability to store and organize tools, fixtures, and work materials efficiently. * Ability to lift up to 50lbs Job Benefits * Health & Welfare Benefits after 30 Days * Holiday Pay immediately * Vacation/Personal after 90 Days * 40lK with immediate vesting after 30 Days * Tuition Reimbursement * Parental Leave * Fitness Reimbursement

Join Our Team as a Welder Are you a skilled Welder looking for a new opportunity in Wrentham, MA? Look no further! Colonial Corrals is seeking a dedicated individual to join our team as a Welder. As a Welder at Colonial Corrals, you will have the opportunity to showcase your talents and contribute to the creation of high-quality agricultural products. Job Responsibilities: Perform welding tasks with precision and accuracy Read and interpret blueprints and welding plans Operate welding equipment safely and effectively Inspect finished products for quality control Collaborate with team members to ensure project deadlines are met Qualifications: Proven experience as a Welder (2-3 year experience) Ability to work independently and in a team environment Strong attention to detail Welding certification is a plus Excellent problem-solving skills Fence Experience / Gate Welding a Plus! Must be able to work in a fast paced environment. If you are a dedicated Welder with a passion for craftsmanship, we want to hear from you! Join the Colonial Fence Co. family and be a part of a company that values hard work, dedication, and creativity. About Us Job is for our sister company Colonial Corrals - Wrentham MA

Position Overview: We are seeking a skilled and detail-oriented Foam Welder. The Foam Welder will be responsible for welding foam materials using specialized techniques and equipment to create durable, precise, and quality foam products. This role requires an understanding of various foam welding techniques, a commitment to safety standards, and the ability to work independently and as part of a team. Key Responsibilities: Weld and fuse foam materials using appropriate welding equipment and techniques. Interpret blueprints, technical drawings, or work orders to determine the correct welding methods and foam types to be used. Ensure that the foam welding process results in clean, strong bonds that meet industry standards and project specifications. Operate specialized welding equipment such as hot air welders, glue guns, or other tools designed for foam materials. Maintain quality control by inspecting welded foam products for defects, ensuring alignment, and confirming overall product integrity. Work with foam types such as polyurethane, polyethylene, and other materials, adjusting welding methods as needed. Ensure proper safety practices are followed, including wearing safety gear and maintaining a safe working environment. Perform routine maintenance on welding equipment to ensure optimal functionality. Collaborate with other production team members to meet project timelines and requirements. Keep work areas clean and organized, ensuring that foam materials are stored and handled properly. Skills and Qualifications: Proven experience with foam welding or related manufacturing processes. Familiarity with foam materials and their properties. Strong attention to detail with the ability to assess and ensure product quality. Knowledge of welding equipment and maintenance procedures. Ability to read and interpret technical documents, blueprints, and work orders. Strong problem-solving skills and the ability to troubleshoot issues with foam welding. Ability to work independently or as part of a team. Excellent manual dexterity and the ability to handle specialized tools and equipment. Familiarity with safety standards in a manufacturing environment. High school diploma or equivalent; additional certification in welding or related fields is a plus.

Title: Welder Fitter A Hiring Organization: Connexion Systems & Engineering Compensation, Benefits, and Employment Type Duration: Permanent Pay rate: $ 33.14-35.68 hour Job#: 17135 Position Summary: The Welder Fitter A performs a wide variety of complex and customized welding duties on standard and custom engineered parts. They perform very complex custom weldment fit up on tanks and heat exchangers of all sizes and weights using the gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding process. This role directs other team members on their tasks when working in tandem on the same vessel and they perform the most complicated and dangerous rigging tasks when moving large vessels. Measures of success: Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within Timely completion of all welding operations within the operational time limits and according to quality protocols Successfully troubleshoot complex welding and fit-up issues independently Responsibilities: Responsibilities include but are not limited to: Works independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Will fit up and fully weld the most complex heat exchangers and tanks including custom fabrications and extremely complex tanks, with minimal guidance by reading and interpreting standard and custom part drawings. This can take place at elevated heights, while working on top of tanks or from elevated work platforms. Completes the most complicated welding repairs and performs final welding operations on complex weldments as needed. Must be able to perform confined space welding as needed. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal, vertical and overhead positions, on both steel and stainless-steel materials. Will weld full penetration welds on small diameter pipe using the GMAW process. Must be able to use a scissor lift when needed to access welding work at heights. Interacts with the Engineering team on designs and fabrication challenges as needed. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Performs the most complex lifting/rigging activities using 10- & 20-ton cranes. Monitors quality of work makes corrective adjustments and reports equipment malfunctions, defective materials or other unusual conditions to supervisor. Maintains necessary records, completes transactions within the Enterprise Resource Planning (ERP) system and accesses company intranet as needed for work instructions. Ensures their own safety and that of team members. Troubleshoots engineering drawings and reviews with management when issues are identified. Maintains work area in neat, clean, and orderly condition and observes all safety regulations and practices. Required Qualifications: High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless Flat, horizontal, vertical and overhead positions With or without backing Small pipe diameter in rotated horizontal position 7+ years of welding experience using drawings, specifications, charts and welding equipment Strong knowledge of shop math and basic geometry concepts Must be proficient in numerous welding procedure specifications including small pipe qualification and various welding positions Ability to follow verbal and written instructions and effectively apply to assigned work Ability to navigate multiple windows in company ERP system to access production and resource data Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Ability to manage time effectively to meet strict time deadlines and production volumes Requires judgment to comply with instructions, solve problems, and the ability to solve minor technical issues without guidance Travel: minimal to none Preferred Qualifications: Graduate of a welding and fabrication vocational or technical training program 3+ years of experience in a pipe, pressure vessel or structural welding shop Work Environment: This position works primarily in a production floor environment where large equipment and noise are prevalent. Safety gear is required in these areas. This position requires extensive physical labor and the ability to work off ladders, work platforms etc. This position also requires occasional work in confined space. This position reports into the site every day. This position has no direct reports.

Experience with gas metal arc welding/flux cored arc welding (GMAW/FCAW) welding process. Pipe fitter experience, and ASME pressure vessel welding experience Full understanding of relevant Welding Procedure Specifications (WPS) and the ability to follow all parameters within Timely completion of all welding operations within the operational time limits and according to company quality protocols Successfully troubleshoot complex welding and fit-up issues independently Responsibilities Works independently using drawings, specifications, WPS and verbal instructions. Uses various types of welding equipment and a variety of common hand and power tools. Will fit up and fully weld the most complex heat exchangers and tanks including custom fabrications and extremely complex tanks, with minimal guidance by reading and interpreting standard and custom part drawings. This can take place at elevated heights, while working on top of tanks or from elevated work platforms. Completes the most complicated welding repairs and performs final welding operations on complex weldments as needed. Must be able to perform confined space welding as needed. Uses FCAW/GMAW welding process, with or without backing, in the flat, horizontal, vertical and overhead positions, on both steel and stainless-steel materials. Will weld full penetration welds on small diameter pipe using the GMAW process. Must be able to use a scissor lift when needed to access welding work at heights. Interacts with the Engineering team on designs and fabrication challenges as needed. Reads appropriate Welding Procedure Specification (WPS) and is capable of interpreting welding variables and assures that all parameters within the WPS are adhered to. Qualifications High school diploma or equivalent Must be able to pass American Society of Mechanical Engineers (ASME) Section IX welding tests with the following variables: FCAW/GMAW and SAW processes Steel-steel, steel-stainless, stainless-stainless Flat, horizontal, vertical and overhead positions With or without backing Small pipe diameter in rotated horizontal position 7+ years of welding experience using drawings, specifications, charts and welding equipment Strong knowledge of shop math and basic geometry concepts Must be proficient in numerous welding procedure specifications including small pipe qualification and various welding positions Ability to perform repetitive work requiring constant alertness or activity and including standing and lifting for extended periods of time sometimes at height of up to 10 feet Preferred: Graduate of a welding and fabrication vocational or technical training program 3+ years of experience in a pipe, pressure vessel or structural welding shop View all jobs at this company

Details Shift: 1st Shift Do you take pride in precision and craftsmanship? Seconn Fabrication is seeking an experienced Welder/Fabricator to join our team. This role combines production welding, fabrication, and quality assurance in a fast-paced environment. Key Responsibilities: * Weld and fabricate metal components to meet blueprint specifications. * Prepare materials for welding, including cutting, grinding, and cleaning metal. * Provide feedback on fabrication processes, including assembly, design, and tooling. * Create fixtures and annotate customer blueprints for future reference. * Maintain production standards and consistently deliver high-quality work. Qualifications: * 3-5 years of welding and fabrication experience. * Ability to read and interpret blueprints, including welding diagrams and symbols. * Experience with hand tools and fabrication processes. * High school diploma or equivalent; relevant certifications or coursework preferred. What We Offer: * A culture that values teamwork and innovation. * Competitive pay and full benefits package. * Opportunities for advancement and ongoing skills training. Seconn Fabrication is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. This position description is not to be construed as an exhaustive statement of accountabilities, duties, responsibilities of requirements. Any individual may be required to perform any other job-related activities or functions requested by his/her manager, subject to reasonable accommodation. Seconn Fabrication reserves the right to modify this job description to reflect changes in essential job duties made necessary by changing organizational needs, subject to reasonable accommodation.

Thames Shipyard and Repair is looking for a reliable, hard working welder to work at one of the largest commercial ship repair facilities between New York and Boston. Work Schedule: Monday-Friday 6:30am-4:00pm Saturday 6:30am-12:00pm Overtime available Monday-Saturday Double time available Sunday Responsibilities: Stick welding (SMAW) capability is essential; aluminum MIG and stainless steel TIG welding capabilities are beneficial but not required Working from heights Working from scissor and boom lifts Working in confined spaces with limited access through eighteen inch hatch Climbing ladders Heavy lifting Requirements Pre-employment drug test Respirator fit test and physical Willing and able to work outside year round and in all weather conditions

Welding Instructors are responsible for providing quality instruction to students through well prepared classes, relevant assignments, fair assessment of learning, clear documentation of student progress, and support of the academic success for all students. No teaching experience required. Training will be provided. Our Faculty Members… Have high energy level and ability to engage students Have excellent presentation skills Learn our practice and strategies quickly Receive and respond to ongoing training, development, and feedback Mentor and help guide students of all levels achieve their best Position Requirements: Minimum 3 years experience as a licensed welder, not including apprenticeship, required An understanding of the welding industry - GMAW, GTAW, SMAW, FCAW, and Plasma Ability to use common software programs (MS Word/Excel/Outlook etc.) Excellent verbal and written communication skills Great interpersonal skills About our company: Porter and Chester Institute, a leading trade school in Connecticut and Massachusetts for 75 years, adheres to one basic vision: to educate and train our students to the level that will make them competent employees. With 9 campus locations throughout Connecticut and Massachusetts, we offer training in such trades as Automotive Technology, HVAC-R, CAD, Electrician, Plumbing, as well as Medical Assisting, Dental Assisting, Practical Nursing and Computer & Technology. Our support staff, including Admissions, Financial Aid and other administrative professionals, to our highly qualified Instructors are focused on making the students' experience a fulfilling and enriching one, both professionally and personally. Click here for more company information: *********************************** We are an Equal Opportunity Employer.

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Ukpeaġvik Iñupiat Corporation (UIC) is the village corporation of Barrow, Alaska and is recognized as one of Alaska's top 10 companies with approximately 4,000 employees nationwide and revenues above $700M annually. UIC is projected to grow substantially in the coming years to become a top 3 company in Alaska by 2030. As a proud Alaska Native Corporation, our success brings growth and benefits to our Inupiat shareholders. The size and diversity of our operations means we have a broad variety of career opportunities. We recruit only qualified people looking to join a workforce characterized by strong leadership, competent and hard-working staff, and a superior work environment with a focus on career development, great wages and benefits. **Summary** + Journeyman level welder-fitter. Project includes repairs and upgrades to an existing horizontal bulk storage tank facility. Will be responsible for fit up and welding of both plate and socket weld piping. Other duties as assigned. Experience with occasional heavy equipment operation is a plus. **Essential Functions** + Layout, fit, & weld (various pipe diameters and thicknesses) ½" to 4" carbon steel pipe using a GTAW & SMAW procedure. + Must be able to perform all weld procedures in the 6G position. + Perform pipe preparation duties, including cutting, beveling, and fitting as required. + Weld steel plate, steel angle, pipe socket, pipe threading, welds unistrut, etc. as required. + Assist with concrete forming, trenching, testing, cleanup, and all other duties as assigned. + Must be able to perform all work safely in accordance with Rockford's safety procedures and guidelines. + Maintain a clean and orderly workplace. + Must be able to pass a background check. + Rockford Corporation participates in E-Verify. Other miscellaneous duties as assigned. **Responsibilities** **Knowledge and Critical Skills/Expertise:** + Must be able to qualify to Rockford's GTAW & SMAW weld procedures in the 6G position. + Welds may be NDE tested. + Must be able to read and interpret construction plans and drawings. + Must be able to properly layout and fit pipe, plate, steel angle, and unistrut. Must be able to assist in hydrostatic testing of pipe work. **Qualifications** **Required Experience:** · 5 Years Pipefitting Experience. · 5 Years Welding Experience with SMAW procedures as related to fuel piping. · 2 Years Welding Experience with GTAW procedures as related to fuel piping. · 5 Years' Experience in Construction Related to Fuel and Energy Systems. **Physical Demands:** · Must be able to weld in locations with minimum space. · Must be able to meet the physical demands noted below. · Operation of motor vehicles. · Walking, Standing. · Twisting, turning upper body. · Twisting, turning arms, legs. · Crawling, kneeling, stooping. · Safe distant vision. · Good near vision. · Wear ANSI approved safety footwear. · Wear safety glasses. · Wear hard hat. · Use of all required PPE for tasks at hand. · Lifting, carrying, pushing, and pulling up to 100 lbs. **Environmental Conditions:** · Work will take place in a fuel facility that has ongoing operations while work is underway. · Petroleum contaminated soils may be present within the work vicinity. Authorized Driver Requirement: Employee must have a valid driver's license and three (3) year clean driving record. Employee must follow all Authorized Driver Policy and Procedures regarding approved vehicle usage. All employees must pass Non-DOT pre-employment drug screening and follow all UIC Non-DOT Drug and Alcohol Testing Program guidelines and requirements. If working on a DOT project, employees must pass a DOT pre-employment drug screening and follow all DOT Drug and Alcohol Testing Program requirements. Candidates must pass a background check in order to fill this position. UIC is an Equal Opportunity Employer. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC HR for assistance. **UIC considers all applicants for employment without regard to race, color, sex, national origin, religion, age, physical or mental disability, family responsibility, marital status, sexual orientation, political affiliation, veteran's status or any other legal protected status. Pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, Ukpeagvik Inupiat Corporation, may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants. EOE/AA/M/F/D/V** \#LI-WW1 Applicants may be subject to a pre-employment drug & alcohol screening and/or random drug screen, and must follow UIC's Non-DOT Drug & Alcohol Testing Program requirements. If the position requires, an applicant must pass a pre-employment criminal background history check. All post-secondary education listed on the applicant's resume/application may be subject to verification. Where driving may be required or where a rental car must be obtained for business travel purposes, applicants must have a valid driver license for this position and will be subject to verification. In addition, the applicant must pass an in-house, online, driving course to be authorized to drive for company purposes. UIC is an equal opportunity employer. We evaluate qualified applicants without regard to race, age, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other protected characteristics EOE/D/V. In furtherance, pursuant to The Alaska Native Claims Settlement Act 43 U.S.C. Sec. 1601 et seq., and federal contractual requirements, UIC and its subsidiaries may legally grant certain preference in employment opportunities to UIC Shareholders and their Descendants, based on the provisions contained within The Alaska Native Claims Settlement Act. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. All candidates must apply online at ****************** and submit a completed application for all positions they wish to be considered. Once the employment application has been completed and submitted, any changes to the application after submission may not be reviewed. Please contact a UIC HR Recruiter if you have made a significant change to your application. In accordance with the Americans with Disabilities Act of 1990 (ADA), persons unable to complete an online application should contact UIC Human Resources for assistance (******************************************** The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) UIC Government Services (UICGS / Bowhead) provides innovative business solutions to federal and commercial customers in the areas of engineering, maintenance services, information technology, program support, logistics/base support, and procurement. Collectively, the fast-growing Bowhead Family of Companies offers a breadth of services which are performed with a focus on quality results. Headquartered in Springfield, VA, we are a fast-growing, multi-million-dollar company recognized as a top Alaska Native Corporation providing services across the Department of Defense and many federal agencies. Bowhead offers competitive benefits including medical, dental, vision, life insurance, accidental death and dismemberment, short/long-term disability, and 401(k) retirement plans as well as a paid time off programs for eligible full-time employees. Eligible part-time employees are able to participate in the 401(k) retirement plans and state or contract required paid time off programs. **Join our Talent Community!** Join our Talent Community (************************************************************************ to receive updates on new opportunities and future events. **ID** _2024-21881_ **Category** _Construction_ **Location : Location** _US-RI-Quonset Point_ **Travel Requirement** _N/A_

We are currently seeking an Aerospace TIG Welder (2nd Shift) at our Eastford, CT Facility. Pursuit Aerospace is a contract manufacturer of high quality formed, precision machined and fabricated aerospace parts. We have been in business for over 50 years and have consistently produced top quality products for companies in over a dozen countries We're looking for top notch candidates who thrive in a fast-paced environment, who are looking for a good challenge, and who are dedicated to creating and developing superior customer relationships. You've got to be sharp, and you must be on your game every day… because you will be an essential part of everyday life. Pursuit Aerospace is a world-class company, and we hire only world-class people. People who aren't afraid to work hard and get their hands dirty - in fact, people who want to work hard. In this Welder role your responsibilities & activities will include: Set up and operate the equipment which the operator has received formal approval to operate Weld product per customer requirements Responsible for receiving first piece acceptance from quality department Must be proficient in TIG welding You won't find a better opportunity like the one you'll find with Pursuit Aerospace. If you're an exceptional candidate with a can-do attitude, who's passionate about doing things the right way the first time, join us - the world is waiting for you. Now, here's what we need from you: Able to stay on task during required hours Must be self-motivated and dependable Must have good blueprint interpretation skills Welding experience required Aerospace welding experience preferred At Pursuit Aerospace we dream big, get stuff done and like to have fun! Full time position with benefits including Medical, Dental, Vision, Life Insurance, 401K with an Employer Match and more! Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. In addition to federal law requirements, Pursuit Aerospace Group complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Pursuit Aerospace Group expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. ***Candidates Only-No Third Parties* **

Welding Instructors are responsible for providing quality instruction to students through well prepared classes, relevant assignments, fair assessment of learning, clear documentation of student progress, and support of the academic success for all students. No teaching experience required. Training will be provided. Our Faculty Members… Have high energy level and ability to engage students Have excellent presentation skills Learn our practice and strategies quickly Receive and respond to ongoing training, development, and feedback Mentor and help guide students of all levels achieve their best Position Requirements: Minimum 3 years experience as a licensed welder, not including apprenticeship, required An understanding of the welding industry - GMAW, GTAW, SMAW, FCAW, and Plasma Ability to use common software programs (MS Word/Excel/Outlook etc.) Excellent verbal and written communication skills Great interpersonal skills About our company: Porter and Chester Institute, a leading trade school in Connecticut and Massachusetts for 75 years, adheres to one basic vision: to educate and train our students to the level that will make them competent employees. With 9 campus locations throughout Connecticut and Massachusetts, we offer training in such trades as Automotive Technology, HVAC-R, CAD, Electrician, Plumbing, as well as Medical Assisting, Dental Assisting, Practical Nursing and Computer & Technology. Our support staff, including Admissions, Financial Aid and other administrative professionals, to our highly qualified Instructors are focused on making the students' experience a fulfilling and enriching one, both professionally and personally. Click here for more company information: *********************************** We are an Equal Opportunity Employer.

The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems. * Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites; * Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems; * Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press); * Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. * Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. * Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. * Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld. * Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. * Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. * Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. * Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. * Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. * Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. * Fill holes, and increase the size of metal parts. * Detect faulty operation of equipment or defective materials and notify supervisors. * Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. * Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. * Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. * Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. * Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. * Mark or tag material with proper job number, piece marks, and other identifying marks as required. * Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. * Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. * Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. * Preheat work pieces prior to welding or bending, using torches or heating furnaces. * Hammer out bulges or bends in metal work pieces. * Develop templates and models for welding projects, using mathematical calculations based on blueprint information. * Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. * Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. * Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials. * Set up and use ladders and scaffolding as necessary to complete work. * Use fire suppression methods in industrial emergencies. * Detect faulty operation of equipment or defective materials and notify supervisors; * Direct helpers or apprentices in appropriate tasks; * Must maintain strict adherence to safety rules and quality; * Participate in site housekeeping; * Interact with co-workers in an attentive courteous manner; * Additional duties as directed by management. Qualifications SKILLS & EXPERIENCE/REQUIREMENTS: * Ability to work independently or as part of a team; * Experience: 5 years of Field Experience, trade school or apprenticeship; * Knowledge of materials, methods and tools involved in industrial construction; * Attention to detail; * Ability to keep hand and arm steady; * Be highly focused on customer satisfaction expectations; * Good documentation and record keeping; * Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; * Competency in Permit Required Confined Space; * Understanding of and strict adherence to daily Job Hazard Analysis (JHA); * Appropriate state certification or license; * OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: * Industrial manufacturing facilities Power generating facilities * Chemical manufacturing Healthcare & Institutional * Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces

divdivdiv div class="fr-view" divdiv div class="fr-view"p id="is Pasted"We are currently seeking an Aerospace TIG Welder (2nd Shift) at our Eastford, CT Facility./pp Pursuit Aerospace is a contract manufacturer of high quality formed, precision machined and fabricated aerospace parts. We have been in business for over 50 years and have consistently produced top quality products for companies in over a dozen countries/pp We're looking for top notch candidates who thrive in a fast-paced environment, who are looking for a good challenge, and who are dedicated to creating and developing superior customer relationships. You've got to be sharp, and you must be on your game every day… because you will be an essential part of everyday life. /pp Pursuit Aerospace is a world-class company, and we hire only world-class people. People who aren't afraid to work hard and get their hands dirty - in fact, people who want to work hard. In this Welder role your responsibilities amp; activities will include:/pul type="disc"li Set up and operate the equipment which the operator has received formal approval to operate/lili Weld product per customer requirements/lili Responsible for receiving first piece acceptance from quality department/lili Must be proficient in TIG welding /li/ulp /pp You won't find a better opportunity like the one you'll find with Pursuit Aerospace. If you're an exceptional candidate with a can-do attitude, who's passionate about doing things the right way the first time, join us - the world is waiting for you. Now, here's what we need from you: /pul type="disc"li Able to stay on task during required hours/lili Must be self-motivated and dependable/lili Must have good blueprint interpretation skills/lili Welding experience required/lili Aerospace welding experience preferred/li/ulp /ppstrongem At Pursuit Aerospace we dream big, get stuff done and like to have fun!/em/strong/pp Full time position with benefits including Medical, Dental, Vision, Life Insurance, 401K with an Employer Match and more!/ppem Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. In addition to federal law requirements, Pursuit Aerospace Group complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities./em/ppem Pursuit Aerospace Group expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status./em/ppem strong***Candidates Only-No Third Parties*/strong/em **/p/div/div/div /div /div/div /div