Welder Jobs in Vernon, CT

Job Details Experienced North Kingstown, RI - North Kingstown, RI Full Time High School $35.00 - $44.00 Hourly Day ConstructionDescription The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems. POSITION RESPONSIBILITIES: Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites; Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems; Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press); Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Fill holes, and increase the size of metal parts. Detect faulty operation of equipment or defective materials and notify supervisors. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Hammer out bulges or bends in metal work pieces. Develop templates and models for welding projects, using mathematical calculations based on blueprint information. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials. Set up and use ladders and scaffolding as necessary to complete work. Use fire suppression methods in industrial emergencies. Detect faulty operation of equipment or defective materials and notify supervisors; Direct helpers or apprentices in appropriate tasks; Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Interact with co-workers in an attentive courteous manner; Additional duties as directed by management. Qualifications SKILLS & EXPERIENCE/REQUIREMENTS: Ability to work independently or as part of a team; Experience: 5 years of Field Experience, trade school or apprenticeship; Knowledge of materials, methods and tools involved in industrial construction; Attention to detail; Ability to keep hand and arm steady; Be highly focused on customer satisfaction expectations; Good documentation and record keeping; Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; Competency in Permit Required Confined Space; Understanding of and strict adherence to daily Job Hazard Analysis (JHA); Appropriate state certification or license; OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: Industrial manufacturing facilities Power generating facilities Chemical manufacturing Healthcare & Institutional Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces

We are looking to bring an experienced TIG welder with 2+ years of experience in the industry. You will work on a variety of jobs ranging from commercial skyscrapers, automotive, aviation, along with projects for various high-profile clients. Job duties will be assigned daily before your shift, and you will be allocated to new projects or completing unfinished jobs from the previous day. Candidates must be able to understand and follow welding and assembly prints. **Responsibilities** + Perform TIG welding on various projects. + Understand and follow welding and assembly prints. + Work with sheet metal, stainless steel, and aluminum. + Perform MIG welding, rework, and structure welding. + Read and work off of blueprints and schematics. + Occasionally work overtime on Saturdays, but not mandatory. **Essential Skills** + 2+ years of TIG welding experience. + Knowledge of reading and working off of blueprints and schematics. + Experience working with sheet metal, stainless steel, and aluminum. + Proficiency in MIG welding and structure welding. **Additional Skills & Qualifications** + Experience in stick welding and plasma cutting. **Why Work Here?** We offer great opportunities for advancement, with tenured welders making $35+ per hour. Our benefits include a great 401k plan, year-end reviews for raises, yearly bonuses based on production and tenure, and Christmas bonuses. **Work Environment** The facility is well-lit and set up as a true job shop. It can be a little colder in the winter and hotter in the summer. We have a strong tenure on production, with many individuals having worked here for over 15 years. **Job Type & Location** This is a Contract to Hire position based out of Springfield, Massachusetts. **Pay and Benefits** The pay range for this position is $22.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Springfield,MA. **Application Deadline** This position is anticipated to close on Apr 11, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

The Welder will prepare, arrange, fit and assemble a variety of materials (stainless, carbon, nickel alloy, cobalt alloy etc.), and components using a variety of weld processes TIG, MIG, torch, (oxygen acetylene), TIG brazing. Primary Responsibilities: Apply all types of welding processes to various parts, assemblies, and components; Make welds in all positions; Possess skills to successfully interpret and execute production using drawings, blue prints, and planning; Set up and perform welding operations in the facility, manual and/or automatic within the limits of certifications in accordance with customer requirements, and current methods and process sheets; Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications; Have a working knowledge of welding practice and weld - ability of current metal groups within their certification; Be a flexible team player and participate with problem solving and continuous improvements; All other duties and/or tasks assigned by supervisor; Will adhere to all quality and safety standards. Requirements: * Must pass weld test coupons per AWS D17 (ref weld groups stainless, Nickle, Cobalt, Alum and Titanium) Included butt, lap, edge, corner and tee joints * High School diploma or equivalent - documentation required * Must meet ITAR definition of US Person(s)- documentation required * Must have sheet metal fabrications skills, familiar with assembly/disassembly procedures * Must be able to demonstrate tube welding at 45, 60 and 90 degree angles * Desired skill 3 years' experience tube welding of aerospace alloys such as 321 SS, Inconel 625 and Titanium * Desired current weld certification per AWS D17, weld groups Stainless, Inconel, Alum and Titanium * Adhere to AS9100 and other quality standards * Minimum of 3 years' experience using TIG, torch (oxygen acetylene), TIG brazing * Experience with aerospace alloys such as Stainless Steel, Inconel, Titanium, Cobalt and Alum * Experience with in-process use of visual and FPI inspection a plus * AMK/MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug screening will be required. Physical Demands /Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and communicate. The employee must frequently lift/or move up to 35-50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required personal protective equipment (PPE). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #9900410324AMK to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Wednesday April 9th, 2025

Who said you can't join a leading company with decades of success? Partner with Staffmark and we will connect you with our local client with over 40 years of growing success! We are seeking to fill a TIG Welder position in Putnam, CT. Bring your hard work, efficiency, and dedication to learn and immerse yourself in a team environment with advancement opportunities, where you can reach new heights in your career. Schedule: Three shifts available Pay rate: $19 - $30/hr. Essential tasks: Perform TIG welding on stainless steel, aluminum, and other alloys while interpreting engineering drawings and blueprints. Set up and maintain welding equipment, conduct quality checks to ensure industry standards are met, and follow all safety protocols. Maintain a clean workspace and collaborate with team members to achieve project goals and deadlines. Qualifications: * 5+ Years of TIG welding experience * Experience welding high nickel alloys (0.060" - 0.25" Thick) * 2+ Years of fabrication experience Our client offers tons of perks! * Competitive salary * Health, dental, and vision insurance * 401(k) retirement plan * Paid time off and holidays * Career development opportunities At Staffmark, we value you and the shared future success we hold together. If you're ready to embark on a journey that creates opportunities for every stage in your career, then click "Apply Now." We are eager to connect with you! The base pay range above represents the low and high end of the base compensation range we reasonably expect to pay for this position. Actual base compensation will vary and may be above or below the range based on various factors including, but not limited to, geographic location, actual experience, and job performance. This job posting is not a promise of any specific pay for any specific employee. After you have applied, download our Staffmark Group WorkNOW App to receive real-time job offers and apply for additional opportunities. You can download it from the App Store or get it on Google Play.

Purpose/Scope: To provide general construction labor tasks, in an efficient and safe manner, as part of a welding for precast panels. Essential Duties and Responsibilities: Completes general construction labor tasks necessary to caulk precast concrete panels Takes work direction from welding crew foreperson May perform work of a miscellaneous nature as directed by foreperson Uses materials/supplies in an efficient manner Handles equipment in a responsible manner Follows established safety procedures and policies Basic Qualifications: 3G & 4G Certified Welder AWS Certification Other Required Qualifications: Ability to carry out simple and complex verbal instructions Ability to work well with others and maintain professional conduct at all times Ability to work from ladders and aerial work platforms above 20 ft Ability to obtain membership to local Laborers union General knowledge of construction practices Valid driver's license and reliable means of transportation Ability to travel extensively (50% of the time or more, including overnights) and work overtime as needed Preferred Qualifications: 2+ years of construction or manual labor experience High school diploma or equivalent Physical Requirements: Field: Must be able to traverse uneven ground, move minimum of 50lbs., spatial awareness/depth perception, climb on a flatbed semi-trailer Work Environment: Field: All types of weather conditions (year-round, Mid-west and Northeast), dirt/dust, noise from heavy machinery/vehicles

We are seeking a skilled and detail-oriented Welder to join our growing team. The ideal candidate will have 5+ years of experience with TIG and MIG Pulse welding processes and the ability to fabricate high-quality components with precision. This role involves working with stainless steel materials, interpreting blueprints, and ensuring adherence to specifications to deliver superior results. Duties and Responsibilities Use TIG or MIG Pulse welding processes to weld stainless steel components of 304 and 316 metal products. Must be able to interpret drawings, blueprints, specifications, sketches, and tolerances. Weld components in flat, vertical, or overhead positions. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Set up and operate hand and power tools, such as angle grinder, TIG welder and gas metal arc welding equipment. Select proper filler rods according to base metal specifications. Grind or cut edges of workpieces to be joined to ensure snug fit, using angle grinders and hand tools. Detect faulty operation of equipment or defective materials.

Position Overview: We are seeking a skilled and detail-oriented Foam Welder. The Foam Welder will be responsible for welding foam materials using specialized techniques and equipment to create durable, precise, and quality foam products. This role requires an understanding of various foam welding techniques, a commitment to safety standards, and the ability to work independently and as part of a team. Key Responsibilities: Weld and fuse foam materials using appropriate welding equipment and techniques. Interpret blueprints, technical drawings, or work orders to determine the correct welding methods and foam types to be used. Ensure that the foam welding process results in clean, strong bonds that meet industry standards and project specifications. Operate specialized welding equipment such as hot air welders, glue guns, or other tools designed for foam materials. Maintain quality control by inspecting welded foam products for defects, ensuring alignment, and confirming overall product integrity. Work with foam types such as polyurethane, polyethylene, and other materials, adjusting welding methods as needed. Ensure proper safety practices are followed, including wearing safety gear and maintaining a safe working environment. Perform routine maintenance on welding equipment to ensure optimal functionality. Collaborate with other production team members to meet project timelines and requirements. Keep work areas clean and organized, ensuring that foam materials are stored and handled properly. Skills and Qualifications: Proven experience with foam welding or related manufacturing processes. Familiarity with foam materials and their properties. Strong attention to detail with the ability to assess and ensure product quality. Knowledge of welding equipment and maintenance procedures. Ability to read and interpret technical documents, blueprints, and work orders. Strong problem-solving skills and the ability to troubleshoot issues with foam welding. Ability to work independently or as part of a team. Excellent manual dexterity and the ability to handle specialized tools and equipment. Familiarity with safety standards in a manufacturing environment. High school diploma or equivalent; additional certification in welding or related fields is a plus.

Why should you work for Controlled Air Inc? We are thrilled to share some exciting news - Yanmar Group has officially acquired Controlled Air Inc., marking a new era of innovation and growth in the HVAC and energy solutions industry. The HVAC Pipefitter is responsible for performing installation and repairs to HVAC equipment and piping systems. Proficiency in fabricating and installing various HVAC piping systems is a fundamental requirement for this position. Key responsibilities include ensuring that all work is carried out in strict compliance with applicable codes, specifications, and Controlled Air/Yanmar standards. Furthermore, the HVAC Pipefitter is tasked with completing projects in a timely manner while effectively managing costs within the allocated budget. This position will maintain high quality performance on the job, excellent working relationship with customers, a high level of coordination and communication with team members; ensure completion within time schedules, gross margin budgets and quality requirements. Job Functions: Install and repair all manner of mechanical piping: hot water, chilled water, steam, refrigeration, condensate, natural gas. Expertise in soldering, brazing, threading, grooved and pressed connections. Knowledgeable of refrigerant piping best practices including VRF systems. Ability to read and interpret plans, specifications, and drawings. Ability to coordinate work from start to finish including, but not limited to, gathering necessary material and staying within allotted hours and other duties as assigned. Knowledge of demolition and removal of equipment & pipes. Expertise in Core-boring, Fire stopping & sleeve installations. Knowledge of methods to secure pipe with brackets, clamps, and hangers. Coordinate piping system layout with project superintendent, owners' rep or other trades as required. Stays in close communication with piping department and project manager, to provide feedback on status of project progression. Alerts piping department and project manager, to any issues that may arise. Provides piping department and project manager, feedback to assist with billing and labor forecasting. Creates detailed service tickets for all work performed to include task description and material used. Monitor project material inventory and coordinate return of excess material at project completion. Follows all safety guidelines. Performs needed paperwork for billing and time reporting. Maintains proper truck stock levels and follows inventory guidelines. Maintains company vehicle in good working order. All maintenance including oil changes are performed on time. Any problems are reported and scheduled. Documents model, serial #, unit description, etc. when needed. Available to work overtime during seasonal peaks. Able to lift components, climb ladders, and maintain physical dexterity needed to service HVAC equipment. Follows all company procedures as outlined in the company manual. Works as a team member for the success of Controlled Air, Inc. and achieve customer satisfaction. Supervisory Responsibility: None Knowledge, Skills and Abilities: Knowledge - Must have familiarity with mechanical and electrical operation of HVAC systems and components. Strong organizational skills with the ability to manage multiple tasks and priorities simultaneously. Excellent communication skills and ability to effectively interact with diverse stakeholders. Job Qualifications Education - HVAC Technical School or associate degree in electrical or mechanical engineering. License - Must hold a CT D2 or S-2 Heating and Cooling Journeyman's license and valid driver's license. This position is full time and based in Branford, CT. This reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. This job description also does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of job change. AA/EOE

Details Shift: 1st Shift Do you take pride in precision and craftsmanship? Seconn Fabrication is seeking an experienced Welder/Fabricator to join our team. This role combines production welding, fabrication, and quality assurance in a fast-paced environment. Key Responsibilities: * Weld and fabricate metal components to meet blueprint specifications. * Prepare materials for welding, including cutting, grinding, and cleaning metal. * Provide feedback on fabrication processes, including assembly, design, and tooling. * Create fixtures and annotate customer blueprints for future reference. * Maintain production standards and consistently deliver high-quality work. Qualifications: * 3-5 years of welding and fabrication experience. * Ability to read and interpret blueprints, including welding diagrams and symbols. * Experience with hand tools and fabrication processes. * High school diploma or equivalent; relevant certifications or coursework preferred. What We Offer: * A culture that values teamwork and innovation. * Competitive pay and full benefits package. * Opportunities for advancement and ongoing skills training. Seconn Fabrication is an Equal Employment Opportunity (EEO) employer and does not discriminate on the basis of race, color, national origin, religion, gender, age, veteran status, political affiliation, sexual orientation, marital status or disability (in compliance with the Americans with Disabilities Act) with respect to employment opportunities. This position description is not to be construed as an exhaustive statement of accountabilities, duties, responsibilities of requirements. Any individual may be required to perform any other job-related activities or functions requested by his/her manager, subject to reasonable accommodation. Seconn Fabrication reserves the right to modify this job description to reflect changes in essential job duties made necessary by changing organizational needs, subject to reasonable accommodation.

This position will be welding and fabricating custom designs under the direction of the department supervisor. Will be interacting with other supporting department staff and management along with plant management and the sales team. This is a union position with the Steelworkers local. Work schedule is Mon - Thurs, 6am - 4;30 pm; overtime on Fridays. Requirements Must be fluent in TIG welding Aluminum. Must be fluent in MIG welding Aluminum. Must be proficient in CNC Folder operation. Must be proficient in CNC punching operation. Must have experience with grinding welds to a condition that will allow a paint, poweder or anodize finish. Must be mechanically inclined. Must be able to use common measuring tools to include, tape measures and squares. Must have the ability to interpret Shop Drawings. Must have be able to pass timed math test. Must be able to use power tools and hand tools. Must be able to read and understand Shop Orders and Shop Releases. Must have good attendance record. Must be able to follow instructions. Must be able to work safely and understand of all safety requirements pertaining to equipment. Must be able to work overtime on short notice including Friday and Saturday as necessary. Must be able to produce product to quality standards. Salary Description $23.55/hr

Thames Shipyard and Repair is looking for a reliable, hard working welder to work at one of the largest commercial ship repair facilities between New York and Boston. Work Schedule: Monday-Friday 6:30am-4:00pm Saturday 6:30am-12:00pm Overtime available Monday-Saturday Double time available Sunday Responsibilities: Stick welding (SMAW) capability is essential; aluminum MIG and stainless steel TIG welding capabilities are beneficial but not required Working from heights Working from scissor and boom lifts Working in confined spaces with limited access through eighteen inch hatch Climbing ladders Heavy lifting Requirements Pre-employment drug test Respirator fit test and physical Willing and able to work outside year round and in all weather conditions

Hamilton Connections is looking to fill a MIG Welder role for a manufacturing company in the New Haven area. The ideal candidate has fabrication experience couple with steady verifiable work history. Please send us your resume or call us at ************ for consideration. Responsibilities: -Perform welding and fabrication tasks to create custom awnings and other metal structures. -Ensure all welds meet industry standards and project specifications. -Collaborate with the design and installation teams to ensure project accuracy. -Maintain a clean and safe working environment. Requirements: -Previous experience in welding and metal fabrication. (Please NOTE: A welding and fabrication test will be part of the interview process) -Be able to communicate in English fluently. -Proficiency in MIG welding techniques. -Ability to read and interpret blueprints and technical drawings. -Strong attention to detail and commitment to quality. -Ability to work independently and as part of a team. 7am-4pm (Mon - Fri) – Saturdays are required during busy season. $25-$30 DOE

PCI is currently looking for Welding Instructors that would be responsible for providing quality instruction to students through well prepared classes, relevant assignments, fair assessment of learning, clear documentation of student progress, and support of the academic success for all students. Our Faculty Members… Have high energy level and ability to engage students Have excellent presentation skills Learn our practice and strategies quickly Receive and respond to ongoing training, development, and feedback Mentor and help guide students of all levels achieve their best Position Requirements: Minimum 3 years experience as a licensed welder, not including apprenticeship AWS certification preferred An understanding of the welding industry - GMAW, GTAW, SMAW, FCAW, and Plasma Ability to use common software programs (MS Word/Excel/Outlook etc.) Excellent verbal and written communication skills Great interpersonal skills About our company: Porter and Chester Institute, a leading trade school in Connecticut and Massachusetts for 75 years, adheres to one basic vision: to educate and train our students to the level that will make them competent employees. With 9 campus locations throughout Connecticut and Massachusetts, we offer training in such trades as Automotive Technology, HVAC-R, CAD, Electrician, Plumbing, as well as Medical Assisting, Dental Assisting, Practical Nursing and Computer & Technology. Our support staff, including Admissions, Financial Aid and other administrative professionals, to our highly qualified Instructors are focused on making the students' experience a fulfilling and enriching one, both professionally and personally. Click here for more company information: *********************************** We are an Equal Opportunity Employer.

We are currently seeking an Aerospace TIG Welder (2nd Shift) at our Eastford, CT Facility. Pursuit Aerospace is a contract manufacturer of high quality formed, precision machined and fabricated aerospace parts. We have been in business for over 50 years and have consistently produced top quality products for companies in over a dozen countries We're looking for top notch candidates who thrive in a fast-paced environment, who are looking for a good challenge, and who are dedicated to creating and developing superior customer relationships. You've got to be sharp, and you must be on your game every day… because you will be an essential part of everyday life. Pursuit Aerospace is a world-class company, and we hire only world-class people. People who aren't afraid to work hard and get their hands dirty - in fact, people who want to work hard. In this Welder role your responsibilities & activities will include: Set up and operate the equipment which the operator has received formal approval to operate Weld product per customer requirements Responsible for receiving first piece acceptance from quality department Must be proficient in TIG welding You won't find a better opportunity like the one you'll find with Pursuit Aerospace. If you're an exceptional candidate with a can-do attitude, who's passionate about doing things the right way the first time, join us - the world is waiting for you. Now, here's what we need from you: Able to stay on task during required hours Must be self-motivated and dependable Must have good blueprint interpretation skills Welding experience required Aerospace welding experience preferred At Pursuit Aerospace we dream big, get stuff done and like to have fun! Full time position with benefits including Medical, Dental, Vision, Life Insurance, 401K with an Employer Match and more! Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities. In addition to federal law requirements, Pursuit Aerospace Group complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Pursuit Aerospace Group expressly prohibits any form of workplace harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. ***Candidates Only-No Third Parties* **

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Overview Perform Entry level welding and fabrication tasks with attention to detail, ensuring high-quality craftsmanship and precision in all work. Understands techniques and takes directions from senior welders and supervisors. Ability to read blueprints and understand quality requirements. Responsibilities Work with direction, layout, set-up and fabrication/welding of product. Must be able to process Tig & Fluxcore welding. Assemble product as required in various departments. Responsible for producing and inspecting product to ensure it is within specifications. Must be able to become certified by AWS within 2 years from date of hire or date of transfer. Performs basic machine maintenance as instructed. Maintain a clean and organized work area. Fully responsible for the quality of their own work. Comply with all company safety policies, procedures and practices. Must be a team player and participate in efforts to achieve department and company goals. Work overtime as required. Perform other duties as assigned. Who is Kadant Solutions Division? Kadant Solutions, based in Auburn, Massachusetts, develops, manufactures, and markets a wide range of doctoring, cleaning, filtration, and forming systems and related consumables used in process industries worldwide including construction roofing materials, food processing, metals processing, nonwovens, pulp and paper, textiles and fibers, and tissue. Why consider joining the Kadant team? Kadant is named as one of America's Most Responsible Companies 2024 by Newsweek Kadant was named as one of America's Greatest Workplaces for Diversity 2023 by Newsweek Kadant was named to Newsweek's list of America's Most Responsible Companies in 2023.and 2024.e 100% of Kadant's energy comes from renewable sources. Kadant serves the pulp and paper industry which has recycled 68% of everything produced and 82% of cardboard since 2009, the highest of any processing industry. Kadant serves several process industries including lithium-ion battery production, food processing, metals processing, carbon fiber, nonwovens, textiles, and construction roofing materials. At Kadant, our customer-focused innovation allows us to deliver Sustainable Industrial Processing engineering services and technologies to help our customers create more value with fewer inputs. Equal opportunity employer. *Diverse and inclusive workplace. *Competitive wage. *All benefits are effective upon date of hire. Our comprehensive benefit package includes: *Medical, Dental and Vision insurance with best-in-class premiums. *10 ½ paid holidays. *401k with match. *Company paid life insurance benefit *Disability insurance. *Aflac insurance. *Lifelock insurance. *MetLaw legal assistance. *Employee assistance program. *Flexible spending. *Dependent care. *Educational assistance. *Employee stock purchase plan. *Pay rate is based on experience and skill level. Qualifications Education/Experience: High school diploma or equivalent-Trade School Diploma preferred. Two years of hands-on welding experience. Inclusive of technical education. Must be able to become certified by AWS within 2 years from date of hire or date of transfer. Experience with the methods and devices to lift heavy irregularly shaped objects. Knowledge: Basic shop mathematics, able to read basic blue prints, understands order of operations and good manufacturing practices. Skill: Able to correctly use and read basic measuring tools (i.e. Vernier Calipers, tape measure and scale). Ability to control the process to hold specified tolerances. Verbal and written communication skills to convey information within the organization. Ability to solve practical manufacturing problems with little guidance. Basic computer sills (i.e. data entry, editing, searching). Ability to organize and prioritize daily tasks. Physical/Environmental Demands: Lifing requirements can be on a repetitive basis and above average causing fatigue. Requires normal mental and visual awareness. Periodically exposed to hazards of a serious nature requiring care in the use of production equipment. Follows safe work practices and the use of personal protective equipment. All candidates must successfully complete a background check, pre-employment drug screening, and physical examination as a condition of employment. Education/Experience: High school diploma or equivalent-Trade School Diploma preferred. Two years of hands-on welding experience. Inclusive of technical education. Must be able to become certified by AWS within 2 years from date of hire or date of transfer. Experience with the methods and devices to lift heavy irregularly shaped objects. Knowledge: Basic shop mathematics, able to read basic blue prints, understands order of operations and good manufacturing practices. Skill: Able to correctly use and read basic measuring tools (i.e. Vernier Calipers, tape measure and scale). Ability to control the process to hold specified tolerances. Verbal and written communication skills to convey information within the organization. Ability to solve practical manufacturing problems with little guidance. Basic computer sills (i.e. data entry, editing, searching). Ability to organize and prioritize daily tasks. Physical/Environmental Demands: Lifing requirements can be on a repetitive basis and above average causing fatigue. Requires normal mental and visual awareness. Periodically exposed to hazards of a serious nature requiring care in the use of production equipment. Follows safe work practices and the use of personal protective equipment. All candidates must successfully complete a background check, pre-employment drug screening, and physical examination as a condition of employment. Work with direction, layout, set-up and fabrication/welding of product. Must be able to process Tig & Fluxcore welding. Assemble product as required in various departments. Responsible for producing and inspecting product to ensure it is within specifications. Must be able to become certified by AWS within 2 years from date of hire or date of transfer. Performs basic machine maintenance as instructed. Maintain a clean and organized work area. Fully responsible for the quality of their own work. Comply with all company safety policies, procedures and practices. Must be a team player and participate in efforts to achieve department and company goals. Work overtime as required. Perform other duties as assigned. Who is Kadant Solutions Division? Kadant Solutions, based in Auburn, Massachusetts, develops, manufactures, and markets a wide range of doctoring, cleaning, filtration, and forming systems and related consumables used in process industries worldwide including construction roofing materials, food processing, metals processing, nonwovens, pulp and paper, textiles and fibers, and tissue. Why consider joining the Kadant team? Kadant is named as one of America's Most Responsible Companies 2024 by Newsweek Kadant was named as one of America's Greatest Workplaces for Diversity 2023 by Newsweek Kadant was named to Newsweek's list of America's Most Responsible Companies in 2023.and 2024.e 100% of Kadant's energy comes from renewable sources. Kadant serves the pulp and paper industry which has recycled 68% of everything produced and 82% of cardboard since 2009, the highest of any processing industry. Kadant serves several process industries including lithium-ion battery production, food processing, metals processing, carbon fiber, nonwovens, textiles, and construction roofing materials. At Kadant, our customer-focused innovation allows us to deliver Sustainable Industrial Processing engineering services and technologies to help our customers create more value with fewer inputs. Equal opportunity employer. *Diverse and inclusive workplace. *Competitive wage. *All benefits are effective upon date of hire. Our comprehensive benefit package includes: *Medical, Dental and Vision insurance with best-in-class premiums. *10 ½ paid holidays. *401k with match. *Company paid life insurance benefit *Disability insurance. *Aflac insurance. *Lifelock insurance. *MetLaw legal assistance. *Employee assistance program. *Flexible spending. *Dependent care. *Educational assistance. *Employee stock purchase plan. *Pay rate is based on experience and skill level.

The Welder will prepare, arrange, fit and assemble a variety of materials (stainless, carbon, nickel alloy, cobalt alloy etc.), and components using a variety of weld processes TIG, MIG, torch, (oxygen acetylene), TIG brazing. Primary Responsibilities: Apply all types of welding processes to various parts, assemblies, and components; Make welds in all positions; Possess skills to successfully interpret and execute production using drawings, blue prints, and planning; Set up and perform welding operations in the facility, manual and/or automatic within the limits of certifications in accordance with customer requirements, and current methods and process sheets; Check welds visually and dimensionally with precision measuring instruments for conformance to blueprints and specifications; Have a working knowledge of welding practice and weld - ability of current metal groups within their certification; Be a flexible team player and participate with problem solving and continuous improvements; All other duties and/or tasks assigned by supervisor; Will adhere to all quality and safety standards. Requirements: * Must pass weld test coupons per AWS D17 (ref weld groups stainless, Nickle, Cobalt, Alum and Titanium) Included butt, lap, edge, corner and tee joints * High School diploma or equivalent - documentation required * Must meet ITAR definition of US Person(s)- documentation required * Must have sheet metal fabrications skills, familiar with assembly/disassembly procedures * Must be able to demonstrate tube welding at 45, 60 and 90 degree angles * Desired skill 3 years' experience tube welding of aerospace alloys such as 321 SS, Inconel 625 and Titanium * Desired current weld certification per AWS D17, weld groups Stainless, Inconel, Alum and Titanium * Adhere to AS9100 and other quality standards * Minimum of 3 years' experience using TIG, torch (oxygen acetylene), TIG brazing * Experience with aerospace alloys such as Stainless Steel, Inconel, Titanium, Cobalt and Alum * Experience with in-process use of visual and FPI inspection a plus * AMK/MTI is a safety sensitive manufacturer. As such, successful results of FAA pre-employment drug screening will be required. Physical Demands /Work Environment: While performing the duties of this job, the employee is regularly required to stand, move throughout the facility, use hands, reach with hands and arms, and communicate. The employee must frequently lift/or move up to 35-50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required personal protective equipment (PPE). Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit resume noting job inquiry ID#9900521224AMK to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Wednesday April 23rd, 2025

Job Details Experienced North Stonington CT - North Stonington, CT Full Time High School Up to 25% Day ConstructionDescription The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems. POSITION RESPONSIBILITIES: Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites; Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems; Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press); Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding. Remove rough spots from work pieces, using portable grinders, hand files, or scrapers. Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld. Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding. Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications. Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter. Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals. Fill holes, and increase the size of metal parts. Detect faulty operation of equipment or defective materials and notify supervisors. Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained. Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. Clean or degrease parts, using wire brushes, portable grinders, or chemical baths. Mark or tag material with proper job number, piece marks, and other identifying marks as required. Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools. Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations. Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment. Preheat work pieces prior to welding or bending, using torches or heating furnaces. Hammer out bulges or bends in metal work pieces. Develop templates and models for welding projects, using mathematical calculations based on blueprint information. Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments. Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives. Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials. Set up and use ladders and scaffolding as necessary to complete work. Use fire suppression methods in industrial emergencies. Detect faulty operation of equipment or defective materials and notify supervisors; Direct helpers or apprentices in appropriate tasks; Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Interact with co-workers in an attentive courteous manner; Additional duties as directed by management. Qualifications SKILLS & EXPERIENCE/REQUIREMENTS: Ability to work independently or as part of a team; Experience: 5 years of Field Experience, trade school or apprenticeship; Knowledge of materials, methods and tools involved in industrial construction; Attention to detail; Ability to keep hand and arm steady; Be highly focused on customer satisfaction expectations; Good documentation and record keeping; Preparation of miscellaneous paperwork including time sheets, daily reports and material requests; Competency in Permit Required Confined Space; Understanding of and strict adherence to daily Job Hazard Analysis (JHA); Appropriate state certification or license; OSHA 10 certification. PHYSICAL DEMANDS & WORK ENVIRONMENT: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs. WORK ENVIRONMENT: Industrial manufacturing facilities Power generating facilities Chemical manufacturing Healthcare & Institutional Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces

HVAC Pipefitter Location: Branford, CT Why should you work for Controlled Air Inc? We are thrilled to share some exciting news - Yanmar Group has officially acquired Controlled Air Inc., marking a new era of innovation and growth in the HVAC and energy solutions industry. Position Summary The HVAC Pipefitter is responsible for performing installation and repairs to HVAC equipment and piping systems. Proficiency in fabricating and installing various HVAC piping systems is a fundamental requirement for this position. Key responsibilities include ensuring that all work is carried out in strict compliance with applicable codes, specifications, and Controlled Air/Yanmar standards. Furthermore, the HVAC Pipefitter is tasked with completing projects in a timely manner while effectively managing costs within the allocated budget. This position will maintain high quality performance on the job, excellent working relationship with customers, a high level of coordination and communication with team members; ensure completion within time schedules, gross margin budgets and quality requirements. Job Functions: * Install and repair all manner of mechanical piping: hot water, chilled water, steam, refrigeration, condensate, natural gas. * Expertise in soldering, brazing, threading, grooved and pressed connections. * Knowledgeable of refrigerant piping best practices including VRF systems. * Ability to read and interpret plans, specifications, and drawings. * Ability to coordinate work from start to finish including, but not limited to, gathering necessary material and staying within allotted hours and other duties as assigned. * Knowledge of demolition and removal of equipment & pipes. * Expertise in Core-boring, Fire stopping & sleeve installations. * Knowledge of methods to secure pipe with brackets, clamps, and hangers. * Coordinate piping system layout with project superintendent, owners' rep or other trades as required. * Stays in close communication with piping department and project manager, to provide feedback on status of project progression. * Alerts piping department and project manager, to any issues that may arise. * Provides piping department and project manager, feedback to assist with billing and labor forecasting. * Creates detailed service tickets for all work performed to include task description and material used. * Monitor project material inventory and coordinate return of excess material at project completion. * Follows all safety guidelines. * Performs needed paperwork for billing and time reporting. * Maintains proper truck stock levels and follows inventory guidelines. * Maintains company vehicle in good working order. All maintenance including oil changes are performed on time. Any problems are reported and scheduled. * Documents model, serial #, unit description, etc. when needed. * Available to work overtime during seasonal peaks. * Able to lift components, climb ladders, and maintain physical dexterity needed to service HVAC equipment. * Follows all company procedures as outlined in the company manual. * Works as a team member for the success of Controlled Air, Inc. and achieve customer satisfaction. Supervisory Responsibility: None Knowledge, Skills and Abilities: * Knowledge - Must have familiarity with mechanical and electrical operation of HVAC systems and components. * Strong organizational skills with the ability to manage multiple tasks and priorities simultaneously. * Excellent communication skills and ability to effectively interact with diverse stakeholders. Job Qualifications * Education - HVAC Technical School or associate degree in electrical or mechanical engineering. * License - Must hold a CT D2 or S-2 Heating and Cooling Journeyman's license and valid driver's license. * This position is full time and based in Branford, CT. This reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. This job description also does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of job change. AA/EOE