Welder Jobs in Sumter, SC

Eaton's ES AMER ARS division is currently seeking a Spot Welder. Schedule for the role will be Monday-Thursday and hours are 3:00pm-1:00am. is $16.25 - $19.00 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** The Trim Fab Production Associate will provide expertise and support in all areas of the Trim fabrication process, including, but not limited to operating a spot-welding machine to manufacture trim assemblies safely and in a timely manner while adhering to Eaton's high-quality standards. **Essential Functions:** - Exhibit a strong adherence to quality by continually seeking methods of improvement for all functions of the position. Ensure that all products and parts adequately meet Eaton's quality guidelines as they move throughout the production process. Perform quality checks as instructed. - Receive, support and carry out work assignments from management and internal customers to fulfill production requirements in a timely manner. Perform assigned function from oral / written instructions. Closely follow established procedures for completing assigned function. - Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards. - Ensure all safety and industrial hygiene requirements are maintained. - Utilize computers to look up and print out job specific details. Compare information obtained on the computer to physical products. - Work with members of a team to effectively complete work assignment. Receive information from team members regarding customer needs and product requirements and utilize this information to perform one's function. - Perform routine preventative maintenance when required to ensure peak performance of all manufacturing equipment. **Qualifications:** **Basic Qualifications:** - Must be able to work in the United States without corporate sponsorship now and within the future - No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Sumter, SC will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. **Preferred qualifications:** - Working knowledge of Lean concepts preferred. - Computer literate preferred. - Previous experience with cranes and forklifts preferred. - Strong verbal and written communication skills, persuasive skills, and analytical problem-solving skills with individuals and groups to effectively participate within team environment. - Experience reading blueprint, manufacturing diagrams or drawings, or operating instructions. - Experience with measuring devices (i.e. tape measure and calipers). **Skills:** + While performing the duties of this job the employee is regularly required to stand; walk; sit; reach at or above shoulder level; grip; and use hands to handle and feel. + The employee is frequently required to walk; stoop; lift; carry; push; pull; and grip. + The employee is frequently required to lift/carry up to 35 pounds. + The employee is frequently required to push/pull up to or greater than 35 pounds. + The vision requirements include far and close vision with depth perception and color discrimination. + While performing the duties of this job the employee is regularly required to listen and to talk. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Responsible for joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques. Responsible for interpreting blueprints, specifications, diagrams, or schematics to determine the appropriate welding process. Responsible for inspecting completed welds to determine structural soundness. Responsible for welding and fitting various large structural steel components for NAVSEA-related equipment. **Responsibilities** + Join, fabricate, and repair metal and other weldable materials using appropriate welding techniques. + Interpret blueprints, specifications, diagrams, or schematics to determine the appropriate welding process. + Inspect completed welds to ensure structural soundness. + Weld and fit various large structural steel components for NAVSEA-related equipment. **Essential Skills** + 3-5+ years experience in structural fitting and welding. + 3-5+ years experience in flux core welding and pulse welding. + 3-5+ years experience in reading and interpreting structural blueprints and welding symbols. + Proficiency in converting fractions to decimals to 1/16th and/or 1/32nd from tape measures. **Additional Skills & Qualifications** + 3+ years experience in shipyards and related fields fabricating and welding large steel components for NAVSEA-related equipment. **Why Work Here?** We are a growing company looking to double our entire welding team in the next two months, aiming to have 70+ welders/fitters. We offer competitive starting pay and provide lots of overtime opportunities with sign-up sheets for first-come-first-serve Friday/Saturday 8-hour shifts. Our family-owned company has been operating for over 50+ years, fostering a family atmosphere. Employees can receive pay raises while on contract and undergo multi-year evaluations for pay increases. As a full-time employee, you will enjoy great benefits including PTO, paid holidays, no-cost tele-health visits, 401K matching, and more. We are building a new cafeteria for employees and offer monthly food trucks and other perks. We strive to create the best in class for everything at Metal Trades and Pegasus, including being the highest-paid employer and offering the best benefits, onboarding experience, and training. **Work Environment** Non-climate-controlled shop with open-air buildings, some old and some brand new. **Job Type & Location** This is a Contract to Hire position based out of Hollywood, South Carolina. **Pay and Benefits** The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Columbia,SC. **Application Deadline** This position is anticipated to close on Apr 28, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

EnerSys is the global leader in stored energy solutions for industrial applications. We have over thirty manufacturing and assembly plants worldwide servicing over 10,000 customers in more than 100 countries. Worldwide headquarters are located in Reading, PA, USA with regional headquarters in Europe and Asia. We complement our extensive line of Motive Power and Energy Systems with a full range of integrated services and systems. With sales and service locations throughout the world, and over 100 years of battery experience, EnerSys is the power/full solution for stored DC power products. Motive Power applications include industrial lift trucks and pallet jacks, rail equipment, mining equipment, and airline ground support equipment. Some of the motive power brands include Hawker, Ironclad, General Battery, and Fiamm. Wherever there is a need for motive power, EnerSys offers the perfect energy solution. Job Purpose Sets up and operates MIG welding equipment to fit and weld fabricated sheet metal parts into fitted boxes to specified dimensional tolerances by performing the following duties. Essential Duties and Responsibilities * Inspect parts for defects from previous operations. * Must be able to satisfactorily perform all duties and responsibilities referenced in the work instructions for this position. * Must be able to read and understand drawings and blueprints and use a tape measure correctly. * Must be flexible and able to work overtime daily or weekends or have your daily scheduled changed with little or no notice. * Other duties as assigned * This job has no supervisory responsibilities Qualifications Minimum Qualifications * High school diploma/GED, or 1-3 months related experience and/or equivalent combination of education and experience. * Ability to read and interpret documents in local language, such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to do basic math (add, subtract, multiply, divide, fractions, percentages) Preferred Qualifications * Metal fabrication experience General Job Requirements * Must be able to lift up to 50 pounds/23 kilos on a daily continuous basis. Anything heavier will be done with the assistance of a mechanical device or with the assistance of another employee. * Must be able to stand for long periods of time * Must be able to frequently bend; twist; reach; stoop; kneel or crouch. * This position requires working in a plant/warehouse environment. Therefore, expect varying working conditions. * Employees are responsible for wearing the required Personal Protective Equipment in the proper manner at all times. EnerSys provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. EEO/Minority/Female/Vets/Disabled Know Your Rights Know Your Rights (Spanish) EEO is the Law Supplement Pay Transparency Nondiscrimination

A member of the S&P 500 Index, Martin Marietta is an American-based company and a leading supplier of heavy building materials - including aggregates, cement, ready-mixed concrete and asphalt. Through a network of operations spanning 28 states, Canada and the Bahamas, dedicated Martin Marietta teams supply the foundational resources upon which our communities thrive. Martin Marietta's Magnesia Specialties business produces high-purity magnesia and dolomitic lime products used worldwide in environmental, industrial, agricultural and specialty applications. At Martin Marietta, we strive to work with the best and the brightest - those who have the potential to become our company's future leaders. Each of our roughly 9,500 people shares a common purpose regardless of their professional role or work environment. Together, we utilize our diverse skills and experiences to drive our company and its extraordinary culture forward. Our aim is to build on our foundation of success and help values-driven and hardworking people realize their full potential. When you decide to invest your career in Martin Marietta, you'll know what it's like to be respected, challenged and rewarded. To learn more about Martin Marietta and our ONE team, visit careersthatcrush.com. What to expect: Martin Marietta is seeking a Maintenance Welder to join our team. The ideal individual will be safety conscious, dependable, and motivated. This individual will be responsible for safely and efficiently repairing and maintaining plant industrial equipment and machinery. The maintenance welder will be responsible for repairs and maintenance of equipment to include conveyor systems, shakers, gearboxes, fixed plant equipment, and other mobile equipment as necessary. Hours are 4 pm - 2 am including weekends as necessary. A typical day for a(n) Maintenance Welder may include: * Troubleshooting, repairing and maintaining all plant equipment often in out of position welding * Maximizing performance of equipment by performing repairs and ensuring preventative maintenance is completed on a timely basis * Performing fabrication, erection of processing equipment and repairs to processing equipment and mobile equipment * Completing daily pre and post inspection of working area * Operating other equipment such as loaders and haul trucks in a safe manner as needed * Aiding in the training of co-workers as needed * Performing other duties as assigned by supervisor You may be a good fit if you: * Possess a High School Diploma, GED or equivalent experience to perform the responsibilities associated with this position * Have one (1) year of experience in welding and maintenance In return, we offer a highly competitive benefits package, including: * Medical * Prescription Drug * Dental * Vision * Health Care Reimbursement Account * Dependent Care Reimbursement Account * Wellness Programs * Employee Assistance Plan * Paid Holidays and Vacation * 401(k) with Company matching * Pension * Salary Continuation - Short-Term Disability * Long-Term Disability Options * Employee Life Insurance * Spouse & Dependent Life Insurance * Business Travel Accident Insurance * Direct Deposit Payroll * Educational/Tuition Assistance Plan * College Scholarship Program - for dependent children * Matching Gift Program * New Auto Purchase Discount Plans At Martin Marietta, we are proud to be an Equal Opportunity Employer. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all qualified applicants and teammates. We celebrate diversity and commit that qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

American Welding & Gas, has an immediate opening for a Cylinder Processor at our in facility in Columbia, SC! In this position they perform product composition and quality sampling and testing. Routine inspection, calibration, and repair of meter and associated equipment (meter tube/plates, ultrasonic meter) Duties & Responsibilities * Inspect gas cylinders to detect surface defects and tests thickness of cylinder walls. * Sorting and prefill safety inspection of cylinders, primarily outdoors * Filling compressed gas cylinders * Safely move gas cylinders off pallets onto testing equipment. * Calibrate and adjust ultrasonic testing equipment to required standards and settings. * Review and interpret test results and documentation as it relates to local, state, and federal compliance and DOT regulations. * Record test results, cylinder serial number, and test date in a timely and accurate manner. * Stamp test date and label gas cylinders once ultrasonic testing is complete. * Ensure that defective cylinders or those requiring maintenance or repair are removed from service until corrected. * Inspect, maintain, and perform maintenance on ultrasonic testing equipment, as needed. * Operate computer equipment and value machine (if applicable) to conduct testing. * Operate a forklift, pallet jack and other warehouse equipment. * Work in a team environment to ensure necessary work is completed each day * Abide by AWG safety and industry safety standards Qualifications & Education Requirements * High School graduate or GED equivalent * Able to read and write English * Mechanically inclined * Technical skills * Computer skills American Welding & Gas (AWG) is a manufacturer and distributor of industrial gases as well as a provider of all your welding supply needs. We are a family and teammate owned company that is headquartered in Raleigh, North Carolina. Our company provides industrial, medical and specialty gases as well as food and beverage gases across the United States, from Montana to Pennsylvania and down through Texas and Florida. With a team of over 800 employees, over 100 retail locations and 22 fill plants we pride ourselves in our customer service, expertise, assets and resources that allow us to reach a large and diversified customer base of the highest quality. Be the newest member of the AWG team! American Welding & Gas, Inc. is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

IF you want the stereotypical 8-5 boring shop fab job, THIS JOB IS NOT FOR YOU! If your attention to detail is far above your peers - This IS for YOU! If you're ready for your work to valued- This IS for YOU! If you're ready for your work to speak for itself- WE WANT YOU!!! RESPONSIBILITIES: Work closely with Leadership to insure daily and project related needs are met safely and efficiently by assisting with various tasks. Ability to be trained to safely and efficiently operate all fabrication shop equipment such as drill presses, saws, and forklifts. Ability to take direction and effectively communicate with supervisors based on project needs. Ability to think creatively and apply results to safely and efficiently complete tasks. Responsible for observing and complying with all safety and project rules. Maintain work area in clean and tidy manner. Other duties as assigned. Fabrication Expectations Disassemble and reassemble equipment for repair or transportation. Determine which machines, techniques, and tools to use when moving equipment and completing jobs. Capability of cutting wood, aluminum, and steel Good communication skills. Strong attention to detail with excellent mathematical skills. Must be able to work well in a team environment. Welding Needs Aluminum/Steel welding experience a MUST Familiarity with common welding tools and procedures, including MIG welding metal fabricating, grinding, and finishing metals Ability to stand, crouch, and occasionally lift heavy equipment Produce strong, clean welds 1+ years of professional welding experience preferred Working knowledge of industry tool and equipment "The Difference is in the Details"

Owen Steel Company located in Columbia, SC is currently recruiting for Welders and Fitters. Primary duties of Fitters are to plan, sequence, lay out and fit accurately and efficiently in all varieties of complex structural fittings. Be able to read and analyze structural detail drawings and should possess a thorough knowledge of quality control procedures. Primary Responsibilities Perform related tasks such as grinding, cleaning, moving material, etc. Maintain work and work area in a neat and orderly manner Observe company work, safety and personnel policies Detect faulty equipment and report same to supervisor Wear all appropriate personal protective equipment (hard hat, safety glasses, welding shield, goggles, gloves, etc.) Use welding equipment only within its rated capacity Perform these and other duties as instructed Capable of productive, acceptable quality welding in Flux Core and Sub-Arc Ability to read weld symbols on drawings and blueprints. Qualifications and Requirements Certified in one or all four processes in the flat and horizontal positions and capable of running acceptable quality fillet welds productively demonstrated by practical experience. Capable of straight handburning of ordinary work Familiar with welding symbols and use of welding gauge Capable of lifting up to 50 pounds Bending, lifting, and twisting are required to perform job. Good Mathematical skills Experience Welding: 3 years (Preferred)

C&C Boiler Sales and Service, Inc. is seeking a Mechanic to join our team. We specialize in power plant, heating, mechanical contracting, and industrial products including packaged boilers, industrial burners, heat exchangers, and other boiler plant equipment for various applications. C&C Boiler provides new product sales, service, parts, technical support, testing, and training throughout Virginia, West Virginia, North Carolina, and South Carolina. Duties will require: (including by not limited to) Welding, Code Services, Fabrication & Pipe fitting Boiler re-tubing Installation of boiler equipment Positive disposition and willingness to support team building within the company Continuing education / OSHA safety training requirements / 10 Panel drug screen The company will supply you with: Company email account, cell phone, and tablet. Health insurance coverage Enrollment in Paylocity Resources and benefits thereof including employee handbook. Qualifying 401k plan (upon fulfillment of enrollment plan) Accrued 80 hrs Paid Time Off and 7 company recognized Holidays Non-Disclosure Agreement concerning C&C Boiler's intellectual information and property. A fun, challenging and enjoyable place for employment. Requirements 5 years experience welding/fitting and/or boiler/industrial background Continuing education / OSHA safety training requirements / 10 Panel drug screen Strong verbal and written communication skills; write routine reports and correspondence Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Ability to occasionally lift up to 50 lbs. Ability to work in a non-climate-controlled environment Proficient use of technology, computers, and software including Microsoft Office suite of products Valid Driver's License required. Must be insurable with no major infractions Job requires daily verbal, written, and electronic communication You must always demonstrate excellent customer service skills

Job Responsibilities Teaches classroom and laboratory courses. Prepare and teach a full range of welding coursework such as oxy-acetylene, gas metal arc, shielded metal arc (including pipe), gas tungsten arc (steel, stainless and aluminum) and fabrication. Supervises students during classroom and laboratory activities. Must be proficient in SMAW, GTAW, GMAW, FCAW, all positions plate and pipe, ferrous and non-ferrous metals. Must be proficient with OxyFuel and Plasma Cutting equipment. Must be capable of operation and maintaining all welding lab equipment. Face-to-Face Classes Needed for Spring 2025 Minimum and Additional Requirements Associate Degree in teaching discipline or Graduate Apprentice in appropriate field. Minimum of five (5) years full-time experience or journey worker status required. Teaching experience and NCCER certification. Preferred Qualifications Bachelor's preferred and AWS Certifications. Additional Comments EEO STATEMENT: Orangeburg-Calhoun Technical College is an Equal Opportunity Employer and it does not discriminate on the basis of race, color, religion, national origin, sex, pregnancy, age, disability, or veteran status. Veteran Preference Statement: South Carolina and OCtech are making our veterans a priority for employment. For ALL Faculty Positions - An unofficial/student copy of your transcript must be submitted along with your on-line application if the position you are applying for requires a degree and/or certificate. Official transcripts are required when you begin employment. If you are applying for a position that requires current Licensures/Certificates- a copy must be submitted along with your on-line application. Official current licensures/certificates will be required when you begin employment.

it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: * Day 1 Benefits Coverage with low cost Medical, Vision, Dental * Day 1 Paid-time Off and Vacation * 4.5% Company Match 401(k) plan * $500 Annual Company-paid Lifestyle Benefit * Competitive Compensation and Bonuses * Company-paid Life and Disability Insurance * Employee Stock Purchase Plan * Training and Advancement Opportunities Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do * Carry out gas metal arc welding (GMAW) to manufacture and repair equipment items and components * Cut materials into the required shapes, checking dimensions and thicknesses * Welding or joining metal and other materials into a wide range of structures * Operating different types of tools, machinery and welding equipment * Evaluating finished projects and performing quality checks * Performing all welding tasks using various welding equipment and technologies * Designing new parts and producing them according to specifications and company needs * Any other tasks as assigned by supervisor What You'll Need * Capable of performing a wide range of physical activities which include pulling, reaching, bending, climbing and kneeling * Ability to work in all weather conditions * Ability to work overtime as necessary outside of normally scheduled shift with little or no advance notification * Experience with stick, MIG, and wire feed welding * Experience with welding, cutting, fabrication and equipment maintenance preferred * Valid driver's license with current motor vehicle insurance and a clean driving record Your Education * High School Diploma, GED, or equivalent experience is required We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. Current Employee? Click Here to Apply. Current Employees Apply Click here to apply. Nearest Major Market: Columbia Nearest Secondary Market: South Carolina

**About us:** Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction, and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. **Job Title:** SIC Pipe Welder (COLA ERG DP) **Job Summary:** Southern Industrial Constructors seeks Combo Welders for a project in Columbia, SC **Essential Duties and Responsibilities:** + Select equipment and plan layout, assembly, and welding, applying knowledge of physical properties of metal machining weld shrinkage, and welding techniques. + Lay out, position, align, and fit components together. + Bolt, clamp, and tack-weld parts to secure in position for welding. + Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. + Assemble parts by bolting and riveting. + Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torch, straightening press, and hand tools. + Rate information using standards that can be measured or checked. + Detect, recognize, and respond to dangerous conditions or situations. + Certification at one or more levels is required. + Regular attendance is required. + Performs other duties as required. + As required, perform safety inspections of work area, equipment and tools, in accordance with SIC policy to ensure compliance with government regulations, customer requirements, and SIC's safety program. Resolve all discrepancies found through inspections. + Complete all Safety and general job training as required by SIC. + Observes SIC/Client Safety processes and procedures at all times. + Maintain a safe, clean and organized working environment. **Physical Requirements/Job Site Requirements:** + Conditions include working in office, shop, busy traffic areas, freezers, and warehouses, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. Must be able to safely access all areas of property and buildings + May be required to lift and carry items weighing up to 50 pounds + Must be able to move in and around confided spaces and uneven areas + Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises + Must be able to safely access all areas of property and buildings + Must be able to effectively use all required PPE equipment + Strenuous physical demands are required to safely perform the essential functions associated with this position + Must be able to safely operate all involved equipment and tools + Must be capable of standing for long periods of time, bending consistently, working on ladders, and in awkward body positions *Nothing in this job description restricts the Company's right to assign or reassign duties and responsibilities to this job at any time. **_Notice to prospective employees:_** There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies list open positions here (****************************************************************************************************** DateDesc&w=&wc=&we=&wpst=) **.** Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. **As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we** **offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled.** **\#SIC** **\#LI On-Site** **\#LI-VB1** **\#LI-BB1** Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Eaton's ES AMER ARS division is currently seeking a Spot Welder. Schedule for the role will be Monday-Thursday and hours are 3:00pm-1:00am. is $16.25 - $19.00 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Trim Fab Production Associate will provide expertise and support in all areas of the Trim fabrication process, including, but not limited to operating a spot-welding machine to manufacture trim assemblies safely and in a timely manner while adhering to Eaton's high-quality standards. Essential Functions: * Exhibit a strong adherence to quality by continually seeking methods of improvement for all functions of the position. Ensure that all products and parts adequately meet Eaton's quality guidelines as they move throughout the production process. Perform quality checks as instructed. * Receive, support and carry out work assignments from management and internal customers to fulfill production requirements in a timely manner. Perform assigned function from oral / written instructions. Closely follow established procedures for completing assigned function. * Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards. * Ensure all safety and industrial hygiene requirements are maintained. * Utilize computers to look up and print out job specific details. Compare information obtained on the computer to physical products. * Work with members of a team to effectively complete work assignment. Receive information from team members regarding customer needs and product requirements and utilize this information to perform one's function. * Perform routine preventative maintenance when required to ensure peak performance of all manufacturing equipment. Qualifications: Basic Qualifications: * Must be able to work in the United States without corporate sponsorship now and within the future * No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Sumter, SC will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. Preferred qualifications: * Working knowledge of Lean concepts preferred. * Computer literate preferred. * Previous experience with cranes and forklifts preferred. * Strong verbal and written communication skills, persuasive skills, and analytical problem-solving skills with individuals and groups to effectively participate within team environment. * Experience reading blueprint, manufacturing diagrams or drawings, or operating instructions. * Experience with measuring devices (i.e. tape measure and calipers). Skills: * While performing the duties of this job the employee is regularly required to stand; walk; sit; reach at or above shoulder level; grip; and use hands to handle and feel. * The employee is frequently required to walk; stoop; lift; carry; push; pull; and grip. * The employee is frequently required to lift/carry up to 35 pounds. * The employee is frequently required to push/pull up to or greater than 35 pounds. * The vision requirements include far and close vision with depth perception and color discrimination. * While performing the duties of this job the employee is regularly required to listen and to talk. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Responsible for joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques. Responsible for interpreting blueprints, specifications, diagrams, or schematics to determine appropriate welding process. Responsible for inspecting completed welds to determine structural soundness. Responsible for welding and fitting various large structural steel components for NAVSEA related equipment. Overtime available **Responsibilities** + Join, fabricate, and repair metal and other weldable materials using appropriate welding techniques. + Interpret blueprints, specifications, diagrams, or schematics to determine the appropriate welding process. + Inspect completed welds to ensure structural soundness. + Weld and fit various large structural steel components for NAVSEA related equipment. **Essential Skills** + 3-5+ years experience in structural fitting and welding. + 3-5+ years experience in both flux core welding and pulse welding. + 3-5+ years experience in reading and interpreting structural blueprints and welding symbols. + Proficiency in converting fractions to decimals to 1/16th and/or 1/32nd from tape measures. + Experience in using tape measures, squares, and blueprint reading. + 3+ years experience in shipyards and other related fields fabricating and welding large steel components for NAVSEA related equipment. **Additional Skills & Qualifications** + Experience in fitting up large steel components + Experience with NAVSEA standards is a plus **Why Work Here?** Join a growing company that is looking to double its welding team in the next two months. Enjoy competitive starting pay, a family atmosphere, and the opportunity to get pay raises while on contract. Benefit from great full-time employee perks including PTO, paid holidays, no-cost tele-health visits, and 401K matching. Work in a company that values its employees with monthly food trucks, a new cafeteria in the coming months, and other employee perks. Be part of a company that strives to be the best in class in everything, including being the highest-paid employer, offering the best benefits, and providing the best onboarding experience and training. **Work Environment** Work in a non-climate-controlled shop with open-air buildings, some of which are old and some brand new. **Shift/Compensation** Hiring for Night Shift ONLY - $26/hr + $150 per day per diem Night Shift Hours - 330pm-2am M-Th (with OT on Fri and Sat available) **Pay and Benefits** The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Columbia,SC. **Application Deadline** This position is anticipated to close on Apr 24, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

EnerSys is the global leader in stored energy solutions for industrial applications. We have over thirty manufacturing and assembly plants worldwide servicing over 10,000 customers in more than 100 countries. Worldwide headquarters are located in Reading, PA, USA with regional headquarters in Europe and Asia. We complement our extensive line of Motive Power and Energy Systems with a full range of integrated services and systems. With sales and service locations throughout the world, and over 100 years of battery experience, EnerSys is the power/full solution for stored DC power products. Motive Power applications include industrial lift trucks and pallet jacks, rail equipment, mining equipment, and airline ground support equipment. Some of the motive power brands include Hawker, Ironclad, General Battery, and Fiamm. Wherever there is a need for motive power, EnerSys offers the perfect energy solution. Job Purpose Sets up and operates MIG welding equipment to fit and weld fabricated sheet metal parts into fitted boxes to specified dimensional tolerances by performing the following duties. Essential Duties and Responsibilities include the following: Other duties may be assigned. Inspect parts for defects from previous operations. Must be able to satisfactorily perform all duties and responsibilities referenced in the work instructions for this position. Must be able to read and understand drawings and blueprints and use a tape measure correctly. Must be flexible and able to work overtime daily or weekends or have your daily schedule changed with little or no notice. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals to perform the essential functions. General Job Requirements * This position will work in an office setting, expect minimal physical demands. EnerSys provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. EEO/Minority/Female/Vets/Disabled Know Your Rights Know Your Rights (Spanish) EEO is the Law Supplement Pay Transparency Nondiscrimination

it's what's inside that counts _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: Day 1 Benefits Coverage with low cost Medical, Vision, Dental Day 1 Paid-time Off and Vacation 4.5% Company Match 401(k) plan $500 Annual Company-paid Lifestyle Benefit Competitive Compensation and Bonuses Company-paid Life and Disability Insurance Employee Stock Purchase Plan Training and Advancement Opportunities Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do Carry out gas metal arc welding (GMAW) to manufacture and repair equipment items and components Cut materials into the required shapes, checking dimensions and thicknesses Welding or joining metal and other materials into a wide range of structures Operating different types of tools, machinery and welding equipment Evaluating finished projects and performing quality checks Performing all welding tasks using various welding equipment and technologies Designing new parts and producing them according to specifications and company needs Any other tasks as assigned by supervisor What You'll Need Capable of performing a wide range of physical activities which include pulling, reaching, bending, climbing and kneeling Ability to work in all weather conditions Ability to work overtime as necessary outside of normally scheduled shift with little or no advance notification Experience with stick, MIG, and wire feed welding Experience with welding, cutting, fabrication and equipment maintenance preferred Valid driver's license with current motor vehicle insurance and a clean driving record Your Education High School Diploma, GED, or equivalent experience is required We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law.

About us: Since 1962, Southern Industrial has helped install and maintain the manufacturing and industrial base that has fueled growth across the Southeast. We have grown from a Carolinas-based rigging company into the leading provider of rigging services, turn-key industrial construction, and plant maintenance services in the Southeast. As part of EMCOR Group, Southern Industrial's ability to serve our customers is enhanced by EMCOR's financial strength and national presence. Job Title: SIC Pipe Welder (COLA ERG DP) Job Summary: Southern Industrial Constructors seeks Combo Welders for a project in Columbia, SC Essential Duties and Responsibilities: Select equipment and plan layout, assembly, and welding, applying knowledge of physical properties of metal machining weld shrinkage, and welding techniques. Lay out, position, align, and fit components together. Bolt, clamp, and tack-weld parts to secure in position for welding. Set up equipment and weld parts, using arc, gas-shielded arc, submerged arc, or gas welding equipment. Assemble parts by bolting and riveting. Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torch, straightening press, and hand tools. Rate information using standards that can be measured or checked. Detect, recognize, and respond to dangerous conditions or situations. Certification at one or more levels is required. Regular attendance is required. Performs other duties as required. As required, perform safety inspections of work area, equipment and tools, in accordance with SIC policy to ensure compliance with government regulations, customer requirements, and SIC's safety program. Resolve all discrepancies found through inspections. Complete all Safety and general job training as required by SIC. Observes SIC/Client Safety processes and procedures at all times. Maintain a safe, clean and organized working environment. Physical Requirements/Job Site Requirements: Conditions include working in office, shop, busy traffic areas, freezers, and warehouses, with frequent exposure to dirt, dust, grease, oil, vibrations, and adverse weather conditions. Must be able to safely access all areas of property and buildings May be required to lift and carry items weighing up to 50 pounds Must be able to move in and around confided spaces and uneven areas Must be able to adequately hear and respond to voice commands and alerts from other employees, alarms and other job-related noises Must be able to safely access all areas of property and buildings Must be able to effectively use all required PPE equipment Strenuous physical demands are required to safely perform the essential functions associated with this position Must be able to safely operate all involved equipment and tools Must be capable of standing for long periods of time, bending consistently, working on ladders, and in awkward body positions *Nothing in this job description restricts the Company's right to assign or reassign duties and responsibilities to this job at any time. Notice to prospective employees: There have been fraudulent postings and emails regarding job openings. EMCOR Group and is companies list open positions here. Please check our available positions to confirm that a post or email is genuine. EMCOR Group and its companies do not reach out to individuals to help with marketing or other similar services. If an individual is contacted for services outside of EMCOR's normal application process - it is probably fraudulent. As a leading provider of mechanical and electrical construction, facilities services, and energy infrastructure, we offer employees a competitive salary and benefits package and we are always looking for individuals with the talent and skills required to contribute to our continued growth and success. Equal Opportunity Employer/Veterans/Disabled. #SIC #LI On-Site #LI-VB1 #LI-BB1

Eaton's ES AMER ARS division is currently seeking a Spot Welder. Scheudle for the role will be Friday-Sunday and hours are 5:00am-5:00pm. is $16.25 - $20.00 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. **What you'll do:** The Trim Fab Production Associate will provide expertise and support in all areas of the Trim fabrication process, including, but not limited to operating a spot welding machine to manufacture trim assemblies safely and in a timely manner while adhering to Eaton's high-quality standards. **Essential Functions:** - Exhibit a strong adherence to quality by continually seeking methods of improvement for all functions of the position. Ensure that all products and parts adequately meet Eaton's quality guidelines as they move throughout the production process. Perform quality checks as instructed. - Receive, support and carry out work assignments from management and internal customers to fulfill production requirements in a timely manner. Perform assigned function from oral / written instructions. Closely follow established procedures for completing assigned function. - Comply with all safety requirements, including proper use of personal protective equipment and operation of equipment in a safe and competent manner. Understand and meet all departmental safety objectives and goals. Keep assigned work-area clean, organized, and orderly per 5S standards. - Ensure all safety and industrial hygiene requirements are maintained. - Utilize computers to look up and print out job specific details. Compare information obtained on the computer to physical products. - Work with members of a team to effectively complete work assignment. Receive information from team members regarding customer needs and product requirements and utilize this information to perform one's function. - Perform routine preventative maintenance when required to ensure peak performance of all manufacturing equipment. **Qualifications:** **Basic Qualifications:** - Must be able to work in the United States without corporate sponsorship now and within the future - No relocation benefit is being offered for this position. Only candidates within a 50-mile radius of Sumter, SC will be considered. Active Duty Military Service member candidates are exempt from the geographical area limitation. **Preferred qualifications:** - Working knowledge of Lean concepts preferred. - Computer literate preferred. - Previous experience with cranes and forklifts preferred. - Strong verbal and written communication skills, persuasive skills, and analytical problem solving skills with individuals and groups to effectively participate within team environment. - Experience reading blueprint, manufacturing diagrams or drawings, or operating instructions. - Experience with measuring devices (i.e. tape measure and calipers). **Skills:** + While performing the duties of this job the employee is regularly required to stand; walk; sit; reach at or above shoulder level; grip; and use hands to handle and feel. + The employee is frequently required to walk; stoop; lift; carry; push; pull; and grip. + The employee is frequently required to lift/carry up to 35 pounds. + The employee is frequently required to push/pull up to or greater than 35 pounds. + The vision requirements include far and close vision with depth perception and color discrimination. + While performing the duties of this job the employee is regularly required to listen and to talk. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at ************** to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here (********************************************* for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Responsible for joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques. Responsible for interpreting blueprints, specifications, diagrams, or schematics to determine appropriate welding process. Responsible for inspecting completed welds to determine structural soundness. Responsible for welding and fitting various large structural steel components for NAVSEA related equipment. Overtime available **Responsibilities** + Join, fabricate, and repair metal and other weldable materials using appropriate welding techniques. + Interpret blueprints, specifications, diagrams, or schematics to determine the appropriate welding process. + Inspect completed welds to ensure structural soundness. + Weld and fit various large structural steel components for NAVSEA related equipment. **Essential Skills** + 3-5+ years experience in structural fitting and welding. + 3-5+ years experience in both flux core welding and pulse welding. + 3-5+ years experience in reading and interpreting structural blueprints and welding symbols. + Proficiency in converting fractions to decimals to 1/16th and/or 1/32nd from tape measures. + Experience in using tape measures, squares, and blueprint reading. + 3+ years experience in shipyards and other related fields fabricating and welding large steel components for NAVSEA related equipment. **Additional Skills & Qualifications** + Experience in fitting up large steel components + Experience with NAVSEA standards is a plus **Why Work Here?** Join a growing company that is looking to double its welding team in the next two months. Enjoy competitive starting pay, a family atmosphere, and the opportunity to get pay raises while on contract. Benefit from great full-time employee perks including PTO, paid holidays, no-cost tele-health visits, and 401K matching. Work in a company that values its employees with monthly food trucks, a new cafeteria in the coming months, and other employee perks. Be part of a company that strives to be the best in class in everything, including being the highest-paid employer, offering the best benefits, and providing the best onboarding experience and training. **Work Environment** Work in a non-climate-controlled shop with open-air buildings, some of which are old and some brand new. **Shift/Compensation** Hiring for Night Shift ONLY - $26/hr + $150 per day per diem Night Shift Hours - 330pm-2am M-Th (with OT on Fri and Sat available) **Pay and Benefits** The pay range for this position is $25.00 - $26.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Florence,SC. **Application Deadline** This position is anticipated to close on Apr 24, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

EnerSys is the global leader in stored energy solutions for industrial applications. We have over thirty manufacturing and assembly plants worldwide servicing over 10,000 customers in more than 100 countries. Worldwide headquarters are located in Reading, PA, USA with regional headquarters in Europe and Asia. We complement our extensive line of Motive Power and Energy Systems with a full range of integrated services and systems. With sales and service locations throughout the world, and over 100 years of battery experience, EnerSys is the power/full solution for stored DC power products. Motive Power applications include industrial lift trucks and pallet jacks, rail equipment, mining equipment, and airline ground support equipment. Some of the motive power brands include Hawker, Ironclad, General Battery, and Fiamm. Wherever there is a need for motive power, EnerSys offers the perfect energy solution. Learn More About Our Company Job Purpose Sets up and operates MIG welding equipment to fit and weld fabricated sheet metal parts into fitted boxes to specified dimensional tolerances by performing the following duties. Essential Duties and Responsibilities * Inspect parts for defects from previous operations. * Must be able to satisfactorily perform all duties and responsibilities referenced in the work instructions for this position. * Must be able to read and understand drawings and blueprints and use a tape measure correctly. * Must be flexible and able to work overtime daily or weekends or have your daily scheduled changed with little or no notice. * Other duties as assigned * This job has no supervisory responsibilities Qualifications Minimum Qualifications * High school diploma/GED, or 1-3 months related experience and/or equivalent combination of education and experience. * Ability to read and interpret documents in local language, such as safety rules, operating and maintenance instructions, and procedure manuals. * Ability to do basic math (add, subtract, multiply, divide, fractions, percentages) Preferred Qualifications * Metal fabrication experience General Job Requirements * Must be able to lift up to 50 pounds/23 kilos on a daily continuous basis. Anything heavier will be done with the assistance of a mechanical device or with the assistance of another employee. * Must be able to stand for long periods of time * Must be able to frequently bend; twist; reach; stoop; kneel or crouch. * This position requires working in a plant/warehouse environment. Therefore, expect varying working conditions. * Employees are responsible for wearing the required Personal Protective Equipment in the proper manner at all times. EnerSys provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. EEO/Minority/Female/Vets/Disabled Know Your Rights Know Your Rights (Spanish) EEO is the Law Supplement Pay Transparency Nondiscrimination