Welder Jobs in Redford, MI

Joining the Metallus, formerly known as TimkenSteel, team means becoming part of a legacy that dates back over a century. We are an industry leader, manufacturing the cleanest steel in the world for companies in the industrial, aerospace and defense, automotive, and energy markets. This is a position for a four-year Mechanical Maintainer/Certified Welder Apprenticeship, with the potential to continued employment as a Mechanical Maintainer/Certified Welder after the apprenticeship is completed. This entry level maintenance/welding position will be assigned to one of our three Steel facilities in Stark County, Ohio (Gambrinus, Harrison or Faircrest Steel plants). Employees in this position are responsible for performing a variety of maintenance/welding and educational tasks including, but not limited to, classroom study, on the job training, and assisting journeymen in completion of mechanical maintenance and welding tasks. Employees in this position are responsible for but not limited to the following: * Be a motivated team member responsible for miscellaneous welding, mechanical, pipefitting, construction, maintenance and repair duties within a world-class manufacturing facility. * Receive and interpret instructions and prints regarding varying work assignments, both scheduled and emergency. * Analyze and interpret drawings and sketches, as well as plan and determine working procedure, and tools and equipment needed to complete the assignment. * Perform all types of welding, brazing, and cutting on any type of metal. * Perform work in accordance with Metallus practices and ASME code. * Plan layout, construct, install, repair, and maintain all types of pipeline, fitting and fixtures required in plant construction and maintenance. * Perform basic carpentry and sheet metal work. * Troubleshoot on any type of production, auxiliary, or service equipment. * Operate radio-controlled crane and mobile equipment to lift and transport materials, tools, and equipment. * Assist maintenance personnel in making repairs and performing their duties. * Dismantle, clean, inspect, rebuild, repair, replace, install, assemble, adjust, align, lubricate equipment. * Works in shop or plant as required. * Demonstrate the ability to problem solve. * Perform miscellaneous work such as lubricate machines and equipment, erect rigging for movement or lifting of heavy parts, fill out in time reports and work tickets, and keep equipment and work area clean and orderly for safe and efficient asset management. Minimum requirements include: * The ability to troubleshoot mechanical problems in the plant and take corrective action. * Basic understanding of welding and mechanical systems. * The ability to learn quickly, follow instructions and work safely with minimal direction. * Must possess the ability to work effectively with others (giving and receiving direction) and work independently and unsupervised as required. * High School diploma or GED with one year experience in welding and/or mechanical maintenance or current Metallus manufacturing production employee in good standing. * Candidate must be able to obtain 6G certification within the first 120 working days. Preferred experience includes: * Currently possess 6G certification. * Familiarity with prints, drawings and sketches. * Familiarity with Mechanical and Hydraulic drawings or schematics * Knowledge of rigging techniques. * Welding, pipefitting and Iron work. * Candidate has a current and valid driver's license Physical Requirements: * Ability to work at heights of 50 feet up to 100 feet * Ability to work in confined spaces * Ability to lift 75 pounds at one time, multiple times weekly * Ability to operate cranes, trucks or motor vehicles * Ability to work in extreme temperatures All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Pay range $27-31 which is our top pay range for a “Class A” welder. This is someone who can fit and weld our most complex projects independently without assistance and with minimal training needed, which would mean 5-10 years experience minimum. Needs to have experience in AWS D1.1 or ideally some type of pipe welding.

Fitter / WelderLivonia, MI Company is a fabrication facility. Job Duties:Read prints, layout and fitting of mild and structural steel. Experience Required:Must have steel fitting experience Must be able to read prints Must have experience in layout Knowledge of typical tools and machines required to fabricate structural steel Shears, punches, Oxy-acetylene torch, overhead crane, mag-drill, etc. Day Shift: 6:00am - 2:30pm, Monday - Friday, rarely Saturdays. 40 - 45 hours per week. Overtime as need during the week, until 3:30pm Pay Rate: up to $30/hr #IND3

We are currently looking for a Welder. This position will be working in a machine shop for the dedicated purpose of manufacturing components, structure, and machines. This role includes setting up and operating welders to hand weld products in a safe, efficient, quality, and ergonomic manner, performing welding operations on various metals and alloys to produce a wide variety of products with high strength and pressure requirements. Candidates must be able to read a tape measure to 1/16", have strong math skills and have the ability to read micrometers. TIG and MIG experience is REQUIRED! Essential Functions Ability to learn how to read blueprints/technical drawings and fabricate from work orders. Continuously produces, at an acceptable level of productivity with some supervision. Produces acceptable-quality welds with good workmanship and very few rejects. Reads and understands weld prints and symbols. Must be able to keep a clean work area Fabricate components, structures, and machinery from print. MUST HAVE Strong welding skills in (TIG & MIG) Stainless, Tube Steel Job Qualifications Must be able to pass a weld certification test that involves visual inspection, UT test and/or lab testing FCAW process experience preferred Some College/Vocational Welding Program or Coursework and/or minimum 3-year experience Preferred High School Diploma or G.E.D. 3 years technical training and at least one year of experience working in a welding position or equivalent of the two. Schedule and Compensation Immediate openings on 1st shift! 6am-2 pm, Monday through Friday and possibly weekends as needed. Starting pay at $17-$22 per hour, based on experience.

For 60 years, Quality Metalcraft (QMC) and Experi-Metal Inc (EMI) have been leaders in innovative structural solutions for the mobility industry. Joining forces, QMC-EMI makes the production and prototype parts that could be used in the next airplane you take or the next car you buy. We are small enough that YOU can make an impact in your day-to-day work through ensuring quality, engineering a new process, or securing our next sale. You will be able to see your contributions at work in real-time, making a difference in how we operate. At the same time, we are large enough that you will have excellent room for career growth, working as a team with a talented group of people. We are currently seeking our next Production Welder. Apply today and see how our people make the difference. Job Summary: Production Welder is responsible for the positioning, alignment, and fitting together fabricated plates, structural shapes, and weldments to assembly into structural fabricated products. Responsibilities: Observe all MIOSHA and ISO 9001/14001 requirements. Holds, positions, and fixtures to assist in setup Places, and moves blocking, braces, and jigs to hold parts Hammers wedges, drift pins, and turns turnbuckles. Pull pry bars to align parts Grinds or chips rough edges, surplus weld, or scale Positions and turns clamps, and bolts together butt straps or parts Cleans work area, machines, tools and equipment Performs other routine duties Qualifications: H.S. Diploma or GED Experience MIG and TIG welding with various metal materials required (steel, aluminum, etc.). CW certification preferred Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The majority of the time is spent on the shop floor. It will frequently be necessary to spend time on the manufacturing floor in a shop environment where the incumbent may be exposed to moving mechanical parts and/or equipment, loud noises, machining noise, warm temperatures, airborne particles, possible electrical shock, chemicals and fumes. Physical Demands While performing the duties of this job, the employee sits, stands, and uses hands, arms and fingers to perform routine tasks. Normal vision and hearing is required. Other Sponsorship, now or in the future, is not available for this position. Relocation Assistance is not available for this position. QMC-EMI is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all team members. This position summary may not be inclusive of all job responsibilities.

Role Description: To weld prototype and high volume production metal stampings, making sure beads are tight and in line with print specifications. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned. * Ensure that all welds meet the high expectations of the customer * Responsible for the proper packaging, identifying and moving of all finished products to the proper location. * Ability to utilize standard inspection tools to verify parts meet print specifications * Performs first piece inspections as well as all subsequent inspections as required by standard. * Welding a variety of raw materials using the proper weld settings in order to minimize distortion, overheating, expansion, etc. * Utilizing weld fixtures to properly clamp, tack, or hold the pieces as required. * Maintaining and setting up necessary welding tools. * Examining sub-component parts and finished assemblies to blueprints using standard quality tools. * Operating other equipment as necessary and directed by the manufacturing supervisor (grinding, sanding, etc.). * Operate fork lift, if required and trained. * MIG weld experience. * Perform simple maintenance and repair as required. * Will be required to cross-train as back-up in other areas of the manufacturing plant. * Propose potential quality or productivity enhancements i.e. continual improvements. * Working safely as a condition of employment. * Ability to work overtime when needed. Expectations Employees are expected to follow all standards listed below: * Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job. * Organize and maintain efficiency of personal work area. * Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management. * Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives. * Consistently adhere to and support company policies and procedures, including ISO14001, IATF16949, and safety regulations. * Accept instructions and duties in a positive manner. * Treat all co-workers with dignity and respect. * Actively support the Globe Tech values. * Knowledge of all applicable document control processes Work Environment Work environment characteristics are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employees also may be subject to certain environments such as working near loud moving mechanical parts. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following environments include: * Manufacturing shop floor Noise Level The noise level in the working environment will be heavy with high traffic. Ear protection will be required. Physical Demands The physical demands describes below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following physical demands include: * Standing * Walking * Sitting * Reach with hands and arms * Climb or balance * Weight up to 50 Pounds Special Vision Requirements * Close vision (clear vision at 20 inches or less). * Distance vision (clear vision at 20 feet or more). Education/Experience/Certifications: To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred: Education: * GED or High School Diploma. Experience: * one year related experience and/or training Certifications: * None Additional Skills Required: To effectively carry out duties and responsibilities in the job position the following skills are required: Computer skills: * Experience with basic computer systems. Communication skills: * Speak effectively with fellow employees or customers. * Read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, etc. * Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Mathematical skills: * Basic math skills * Basic reading skills Other Skills: * Detail oriented. * Organized and able to meet deadlines while performing multiple duties. Benefits Globe Tech offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

Title: Production Welder Reports to: Weld Department Supervisor Duties & Tasks Must have workable knowledge of GMAW (MIG) Welding process Capable of welding in the flat and horizontal positions Capable of setting up power source and adjust gas flow regulators (amperage, voltage, wire feed speeds) The ability to use fillet gauges, calipers and welding tools of all types The ability to interpret engineering drawings and weld symbols Capable of self-inspection and to recognize weld defects and or flaws Ability to rework or repair weld defects effectively as needed Complete required paperwork and computer entries as required, ensure accuracy of all entries The ability to work overtime as required due to current work loads Immediately inform leader or member of management of any machine malfunction, production quality, material requirements or safety issues Performs repetitive bending, reaching, and lifting actions involving material weighing up to 50 pounds Ensure housekeeping duties are performed as a priority to ensure a clean, safe and orderly work environment Monitor production and material supplies communicate with appropriate personnel of shortages prior to running out May perform other duties or work at different workstations as production needs require Skills Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Operation and Control - Controlling operations of equipment or systems. Monitoring - Monitoring/Assessing performance of yourself, to make improvements or take corrective action. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Problem Solving - Generating alternatives. Evaluating and selecting alternatives. Implementing solutions. Adaptability - change actions, course or approach to doing things to suit a new situation. Desire to Help - Offering your services or resources to make someone's job easier. Abilities Near Vision - The ability to see details at close range (within a few feet of the observer). Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences. Oral Expression - The ability to communicate information and ideas in speaking so others will understand. Written Comprehension - The ability to read and understand information and ideas presented in writing. Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense. Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem. Processes and Procedures - The ability to consistently follow processes and procedures to achieve desired results. Team work - The ability to work within a team. Endurance - Ability to stand for long- periods of time. The ability to pass an in-house welding test. The ability to use fillet gauges and calipers. The ability to read and understand work instructions, drawings, and weld symbols. Technical Knowledge Familiarity with Windows OS, Keyboard, mouse and scanner. Capable of reading and understanding Blue Prints Basic Reading capability Basic Math capability Licenses/Certifications: Current welding qualification' is preferred Minimum Requirements: High school diploma or General Education Degree (GED) Two or more years of production welding experience Familiarity with overhead crane Must be able to pass initial weld test Must be able to work overtime based on business work load

Structural Steel Welder - 2nd Shift - Livonia - $21.88 Per Hour + $2.25 Shift Premium for Second Shift *** This is a 90-Day Temp-To-Hire Opportunity! *** Reports To: Shop Superintendent, Leadman Role: The Welder’s primary role is to operate equipment as needed to complete welding assignments on time and in budget. The Welder reports directly to the Shop Superintendent, Leadman. Essential Duties and Responsibilities 1. Operate saws, shears, cranes and other shop equipment as needed. 2. Assist Fitter in fabrication process. 3. Proficient with the use of burning equipment. 4. Proficient at the identification and application of welds. 5. Follows all company policies and procedures for safety. 6. Maintain shop floor organization and cleanliness. 7. Any other duties as assigned. Position Requirements {Skills, Knowledge, & Experience} Skills Required: • Equipment operation, welding, and burning. Experience: • 2- 5 years structural and miscellaneous fabrication welding. Education: • AWS D1.1 Certification Physical Demands and Working Environment: The physical demands described here are generally representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the functions of this job, the employee is regularly required to speak and hear, stand, and sit for long periods. Vision abilities required include: close vision, distance vision, color vision, depth perception. Use of hands and arms for reaching, feeling, handling. • Site visits may involve loud noise and exposure to fumes, airborne particles, and vibration. Job/Placement Details: Shift: First/Days to Start; but MUST be willing to move to the Second Shift once acclimated and doing well, possibly as soon as hired. Schedule: First Shift: Monday through Friday from 6:30 AM to 3:00 PM. Second Shift: 3:30 PM to 12 AM (8 Hours) to 2 AM if 10 Hours. The Second Shift Always Starts at 3:30 PM. Overtime Policy: Paid over 40-Hours Worked in a week, Sunday through Saturday, at Time and a Half. Overtime Schedule: 5 AM to 3:30 PM, as required and Directed Wage: $21.88 Per Hour for First Shift & $24.13 for Second Shift A Pre-Placement Job Site Interview is required. A Demonstration of Skill Welding Test may also be required.

Posting Number 7-2013 Position Title Welding Instructor (part-time) Employee Group PT Faculty Starting Salary $1,124 per contact hour Compensation Details To view the benefits summary, go to: Part Time Faculty Benefits Information Purpose, Scope & Dimension of Job: Faculty facilitate student learning and initiate and participate in efforts to consistently improve the level of student success. As learning facilitators, faculty consistently assess learning outcomes and their own teaching effectiveness (pedagogy). As professionals, faculty adhere to the ethical standards of their profession as outlined, for example, by the NEA and the State of Michigan. Where applicable, faculty maintain licensure and certifications. Specific Teaching Assignment: Faculty member will be responsible for teaching classes in Welding, and potentially in Metallurgy, and Materials. Minimum Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. 1. Candidate must meet one of the following: A. Bachelor's Degree in Welding, Manufacturing, Mechanical, Applied Technology, Industrial/Technical Engineering or a related field. B. Bachelor's Degree with a Welding/Manufacturing related Associate's Degree OR a minimum of 30 credit hours in manufacturing related courses. C. Bachelor's Degree and advanced professional credential, such as an AWS Certified Educator & Inspector OR Journeyman's card in Welding. In all cases Bachelor's Degree must be from an accredited institution. 2. An equivalent of two (2) years of practical experience needed in welding or in other courses that are taught. 3. Understanding of and commitment to community college teaching, mission and philosophy. 4. Innovative, flexible and positive teaching style and understanding the needs of students from diverse backgrounds. 5. Language Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. 6. Mathematical Skills: Ability to apply concepts such as fractions percentages, ratios, and proportions to practical situations. Ability to work with mathematical concepts such as probability and statistical inference. 7. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. 8. Technology Skills: Ability to integrate computer applications into teaching. 9. Other Skills and Abilities: Ability to apply knowledge of current research and theory to instructional program; ability to plan and implement lessons based on division and college objectives and the needs and abilities of students to whom assigned. Ability to establish and maintain collegial relationships with students, peers, staff, and administrators; skill in oral and written communication. A foreign degree must be certified, at the candidate's expense, by a professional evaluation service. Additional Desirable Qualifications 1. College teaching experience. 2. Master's Degree in Applied Technology or related field. 3. Familiarity with the use of competency-based modularized courseware and instruction. 4. AWS certification. Physical Requirements/Working Conditions 1. The employee must be able to move about 2/3 of the time and be stationary about 1/3 of the time. S/he is required to be mobile around campus for participant involvement/activities. 2. S/he must be able to converse with individuals on a regular basis with the ability to read, analyze, and interpret their needs via phone conversations, face-to-face conversations, or written documentation. 3. The employee must be able to utilize all programs on a computer independently and efficiently (particularly the internet, Word, and the student database). 4. S/he must be able to present information in an instructional setting and respond to questions from groups. 5. The employee must be able to lift and move objects of 50 pounds. 6. Must be able to tolerate frequent exposure to a wide variety of chemicals which are common to the industry. Must be able to handle and mix chemicals properly and safely; and wear appropriate personal protective equipment. Work Schedule While part-time faculty are not required to hold regular office hours during the semesters they teach, they are required to make provisions for student consultations as may be necessary and reasonable. Monday - Friday 7:15am - 9:15am (Livingston location) Additional Information Must be available to teach onsite; opportunities do not exist to teach online courses only. If selected for an interview, candidates may need to provide a professional portfolio. Specific instructions will be shared prior to the interview. Visa sponsorship is not available. Selected candidates must submit to a drug test and criminal background check. Additional Application Deadline Information The College reserves the right to close the recruitment process once a sufficient applicant pool has been identified. Application Deadline Continuously accepting applications Equal Opportunity Summary As an affirmative action/equal opportunity institution, the College encourages diversity and provides equal opportunity in education, employment, all of its programs, and the use of its facilities. The College does not discriminate in educational or employment opportunities or practices on the basis of race, sex, color, religion, gender, national origin, veteran's status, age, disability unrelated to an individual's ability to perform adequately, sexual orientation, or any other characteristic protected by law. Title IX Coordinator Contact Information: 1401 E. Court St., Prahl College Center (PCC- 2030G), Flint, MI 48503, **************. Title II, ADA, Coordinator Contact Information: 1401 E. Court St., Curtice-Mott Complex (CM-1024), Flint, MI 48503, **************. Section 504 Coordinator Contact Information: 1401 E. Court St., Prahl College Center (PCC- 1130), Flint, MI 48503, **************.

Requirements: Read and interpret blueprints, sketches, or product specifications to determine sequence and methods for fabrication, assembly, and installation of product. Perform basic mathematical calculations such as addition and subtraction of fractions as well as utilize measurement devices such as tape measure. Setup and operate fabrication machines such as shear, press brake, punch, and hand tools AWS D1.1 minimum certification with SMAW, GTAW, GMAW for steel, stainless, and aluminum. Work within precise limits and standards of accuracy Ability to lift and maneuver up to 40lbs of material

Read blueprints and drawings to take or read measurements to plan layout and procedures Be proficient in knowledge and use of fabrication techniques involved in the fabrication and manufacture of custom machinery and projects Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Proficiency in the use of all fabrication hand tools, including drills, grinders, cutting tools, squares, levels, etc. Be proficient in SMAW, FCAW, and GMAW welding processes in all positions. Certification may be required for some projects. Operation of machinery involved in the fabrication of machinery at structures. This may include operation of plate shears, ironworkers, drilling and tapping operations, plate burning equipment, plasma cutting, and handheld oxygen/acetylene torches. Test and inspect welded surfaces and structures to discover flaws Maintain equipment in a condition that does not compromise safety Understanding, proficiency, and safe use of overhead cranes and rigging techniques Understanding, proficiency, and safe usage of lift trucks up to 8,000 lbs Welder/fabricators may be asked to help in the preparation of equipment for painting, assembly of equipment for shipping, testing of equipment, installation of equipment at customer sites and other duties required in daily production activities. Requirements Proven experience as a Welder using a variety of welding equipment and procedures (Mig, Arc, etc.) Heavy Plate Armor Welding required Experience with 1G, 2G, 3G, 4G positions strongly preferred Experience in using electrical or manual tools (saws, squares, tape measure, calipers, etc.) Ability to read and interpret technical documents and drawings (weld symbols, blueprints, etc.) Knowledge of relative safety standards and willingness to use protective clothing ( face-shield, gloves, etc.) Successful completion of a relevant apprenticeship program is required or a minimum of three years of experience Professional certification will be a plus High school diploma or equivalent qualification

IGI provides large-scale, high-resolution audio-visual systems for advanced visualization applications and world-class corporate AV solutions to top companies across the USA. All IGI solutions are the culmination of our vast industry experience in delivering cutting-edge technologies and our unwavering reliability, quality, and attentive service. We incorporate innovative technologies from manufacturers such as Samsung, Planar, Sony, Barco, Crestron, NVIDIA, Christie Digital, Crestron, Poly, and Microsoft Teams in our systems. Job Description We have an immediate opening for a Welder/Fabricator to join our Michigan office located in Commerce. The Welder/Fabricator will be an integral part of a team dedicated to the fabrication and creation of large custom structures used in IGI systems. We seek individuals with technical aptitude and a great attitude. Primary Role: Fabrication of IGI custom structures for large-scale, high-resolution, audio-visual systems used with IGI PowerWalls and DesignViews. Detailed Activities: • Fabrication of mechanical structures. • Welding aluminum up to .25 thick. • Machining of custom parts for structures. • Assist with other tasks including installation, inventory, building maintenance, etc. Fabrication shop equipment includes Miller Dynasty 400, Miller Syncrowave 180, Millermatic 250X, Bridgeport Mill, metal lathe, various other fabrication tools. Qualifications • Must be focused on safety and quality. • Must be capable of reading and interpreting build and assembly drawings. • Must have at least five (5) years' mechanical and machinist experience. • Must have excellent aluminum welding skills. • Must have forklift training (IGI will provide if not). • Must be willing to learn and assist with other duties. Travel Rare if any local or out of state/overnight travel. Work Hours Normal work hours for the Welder/Fabricator job are Monday-Friday 8am-5pm. Pay Compensation range is $26/hr. - $30/hr. depending on experience. Additional Information IGI focuses primarily on three key segments of the AV space: 1) Advanced Visualization, 2) Advanced Audio-Visual Integration, and 3) Corporate AV Integration. Advanced Visualization projects involve the design, engineering, fabrication and building of large scale, high-resolution visualization systems for the Fortune 50 and U.S. Military. These technology solutions include PowerWalls, virtual reality (VR) Rooms, and immersive stereo/3D technologies including motion capture labs. Advanced Audio-Visual Integrations projects consist of large dv LED and other LED video wall solutions, control rooms, and other complex, sophisticated solutions. IGI's Corporate AV systems provide users with the collaboration tools necessary to succeed in today's ever evolving technological environment. Our presentation, video conferencing, and digital signage systems help customers use the right technology in board, conference, VTC, collaboration rooms, and huddle spaces to share information, meet goals, and communicate more effectively. To get an in depth look at what we do, see our website at *************** We are IGI.

LJ Inc. is a leader in providing cutting-edge industrial, commercial, and residential turn-key solutions and dedicated to delivering exceptional services to our valued customers. With a strong commitment to innovation, quality, and customer satisfaction, we have established ourselves as a trusted name in the industry. Our team is comprised of talented professionals who are passionate about what they do. We foster a collaborative and inclusive work environment that encourages creativity, growth, and teamwork. We believe in providing our employees with the necessary tools, resources, and support to excel in their roles and reach their full potential. At LJ Inc, we strive for excellence in everything we do. We embrace new technologies, methodologies, and industry trends to stay ahead of the curve. Our commitment to continuous improvement and customer satisfaction sets us apart and drives our success. Join our team and become part of a company that values your skills, knowledge, and contribution. Job Summary: You will be responsible for the installation, maintenance, and repair of machinery and equipment to minimize downtime and maximize productivity. This position requires a strong mechanical aptitude, attention to detail, and a commitment to safety. What we offer: * Competitive compensation * 100% company paid health insurance for employee and dependents * 100% company paid dental and vision for employee and dependents * 401k with 3% company match * Overtime after 8 hours * PTO and vacation time * And much more! Essential Job Functions: Millwright: * Install, maintain, and repair industrial machinery and equipment. * Conduct preventive maintenance to ensure optimal performance of machinery. * Troubleshoot and diagnose mechanical issues and implement effective solutions. * Read and interpret blueprints, diagrams, and schematics. Welding: * Perform various welding processes (MIG, TIG, Stick) on a variety of materials. * Ensure welding projects meet industry standards and specifications. * Inspect and test welds for quality and safety. * Maintain welding equipment and tools. Safety: * Adhere to all safety guidelines, protocols, and procedures. * Promote and maintain a safe work environment for yourself and your team. Documentation: * Maintain accurate records of work performed and materials used. * Provide timely reports and updates to supervisors and clients. Preferred Requirements: * Proven experience as a Millwright and Welder. * Welding certification (e.g., AWS, ASME) preferred. * Proficient in reading blueprints and technical drawings. * Strong problem-solving skills and attention to detail. * Knowledge of industrial machinery and equipment. * Ability to work independently and as part of a team. * Communication and interpersonal skills. * Commitment to safety and quality. Learn more here: *************

Cardinal Staffing is seeking qualified ARC/STICK WELDERS for a facility in Belleville, MI. 1st shift = 5AM - 3PM (10 hour shift) Monday - Thursday OR Tuesday - Friday (Must be flexible to work either shift). Some overtime may be required if production needs increase. $18.00/hr Cardinal Staffing is invested in their team members! All temporary employees are offered competitive compensation as well as a benefits package including health insurance (medical, dental and vision). The purpose of this job is to produce quality, consistent welds while remaining in compliance with all safety protocols at all times. Essential Functions of Job:As a stick welder, you must select the right type of weld for the job and produce structurally sound, clean welds. You may use traditional arc welding, shielded metal arc welding (SMAW), manual metal arc welding (MMA or MMAW), or flux core, or double shielded, arc welding (FCAW) techniques, depending on the application. Skills required to carry out the essential functions include the ability to: Understand and follow directions and rules Safely and effectively operate various machinery and equipment Produce (quality and quantity) parts that meet specifications and expected output levels Visually identify and correct deficiencies in parts produced Interact appropriately and collaborate with fellow employees and management Communicate effectively (written and oral) with other employees and management Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality customer service Work efficiently in a fast paced manufacturing environment with the flexibility to prioritize duties and multi-task at different levels Excellent work history and attendance is a MUST! Physical requirements which are part of the essential functions:Standing, sitting, moving, climbing, lifting up to 50 lbs, push/pull up to 50 lbs, bending, stooping hearing or equivalent, sight-visual acuity.Manual dexterity required for operating machinery and computers including fine, highly controlled muscular movements to adjust the position of a control mechanism; skillful, controlled manipulations of small objects; coordinating the movement of more than one limb simultaneously and bending or stooping repeatedly or continually over time. Mental requirements which are part of the essential functions:The ability to read and understand work instruction plans, diagrams and specifications.Effectively communicate and interact with others. Educational and or prior experience requirements include:High school diploma or equivalent and 2 years relevant experience. The ability to read and understand work instruction plans, diagrams and specifications. THIS DESCRIPTION MAY NOT CONTAIN A FULL LISTING OF THE ESSENTIAL FUNCTIONS TO BE PERFORMED IN THIS POSITION OR THE ASSOCIATED SKILLS. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT. THE JOB DESCRIBED IS AN AT-WILL POSITION. About Cardinal Staffing Services:Cardinal Staffing Services has over 25 years of experience being recognized as leaders in the staffing industry. Founded in Port Clinton, Ohio in 1994, we have grown and expanded into 5 states with 11 offices, delivering custom staffing and recruiting solutions to diverse markets. We leverage technologies, tools, and human connections to create the perfect employers and employees. We are also staffing for the following openings in your area:Maintenance Mechanic, MIG/TIG Welder, General Labor and more. APPLY TODAY! #IND1

Role Description: Weld Technician that will be working within and supporting a team environment. We are looking for a skilled Robotic Weld Technician to join our team and help us push the limits of aluminum fabrication using state-of-the-art robotic systems. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Additional job duties may be assigned. * Provide technical support in developing and improving welding processes * Set up fixtures and jigs for aluminum welding applications * Experience with weld path programming and touch-up techniques * Familiarity with weld inspection criteria (AWS D1.2 is a plus) * Ability to read blueprints, welding symbols, and use measuring tools * Troubleshoot part fit-up problems * Perform quality inspections and troubleshoot weld defects * Knowledge of robot programming and general welding maintenance (Fanuc, Kuka) * Controls knowledge (Allen-Bradley, Fanuc, SLC 500 and SLC 5000 family of controls and HMI) * Collaborate with engineering and production teams to optimize weld parameters * Maintain equipment and follow safety standards Expectations Employees are expected to follow all standards listed below: Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job. * Organize and maintain efficiency of personal work area. * Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management. * Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives. * Consistently adhere to and support company policies and procedures, including ISO14001, IATF16949, and safety regulations. * Accept instructions and perform job duties in a positive manner. * Treat all co-workers with dignity and respect. * Actively support the Globe Tech values Work Environment Work environment characteristics are representative of those that may be encountered by an employee to successfully perform the essential functions of this job. Employees may be subject to certain environments such as working near loud, moving mechanical parts. The following environments include: * Fumes or air borne particles * Extreme heat (non-weather) * Risk of electrical shock * Vibration Noise Level The noise level in the working environment will generally be high. Ear protection will be required. Physical Demands The physical demands describes below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following physical demands include: * Standing * Walking * Sitting * Use hands to finger, handle or feel * Reach with hands and arms * Climb or balance * Stop, kneel, crouch, or crawl * Talk or hear * Taste or smell * Weight up to 35 Pounds Special Vision Requirements * Close vision (clear vision at 20 inches or less). * Distance vision (clear vision at 20 feet or more). * Color vision (ability to identify and distinguish colors). * Depth perception (three dimensional vision, ability to judge distances and spatial relationships). * Ability to adjust focus (ability to adjust the eye to bring an object into sharp focus). Education/Experience/Certifications: To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred: Education: * High School Diploma or GED Experience: * Three to five years as a weld technician/programmer working with aluminum welding in a manufacturing environment. Certifications: * 2 year certificate in an electronic/electrician or robotic weld technical program or equivalent experience preferred Additional Skills Required: To effectively carry out duties and responsibilities in the job position the following skills are required: Computer skills: * Experience with basic computer systems. Communication skills: * Speak effectively with fellow employees or customers. * Read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, etc. * Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Mathematical skills: * Apply mathematical skills including addition, subtraction, multiplication, and division, as well as basic algebra. Other Skills: * Detail oriented. * Organized and able to meet deadlines while performing multiple duties. * Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Benefits Globe Tech offers a competitive wage, challenging opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

For more than 50 years Progressive Metal Manufacturing Company has fabricated high quality metal parts, from the completed delivery of virtually any type of component, fabrication, or assembly. We are ISO/TS16949:2009 Third Edition Certified with the experience, equipment, and talent to produce virtually any type of assembly, fabrication, or component. We specialize in prototype and short run jobs of 50,000 pieces or less. We have all the necessary tools, machinery and manpower to complete our customer's projects, from initial design to completed parts. Progressive Metal Manufacturing Company, founded in 1962, has over 70,000 square feet of manufacturing space located in Ferndale, Michigan. Our capabilities include: manufacturing all types of ferrous and non-ferrous metals for the automotive, truck, farming equipment, defense, and commercial industries. To the qualified candidate we offer: Medical and Dental Insurance, Life Insurance, Paid Vacation, 401K with company match, Paid Holidays, STD/LTD Disability Insurance, Vision, Profit Sharing, and more! Job Description Primary Responsibilities: Skilled at MIG welding with both Aluminum and Steel Performs weld operations using equipment and materials according to Production Package. Sets and adjusts production equipment and materials to ensure defect free welds. The ability to interpret engineering drawings and weld symbols. Regularly inspect in-process and finished parts for defective welds according to work instructions and procedures. Ensure quality standards are met to achieve zero defects. Repair welds using various welding techniques. Place or pack finished parts into designated containers and ensure proper labeling as instructed. Ensure all labels are legible and accurate to finished part. The ability to correctly set-up various welding machines (amperage, voltage, speeds, and pulse) maximizing their efficiency and effectiveness per application. Complete required paperwork and computer entries as required. Ensure accuracy of all entries. The ability to work overtime as required. Immediately inform leader or member of management of any machine malfunction, production quality, material requirements or safety issues. Performs repetitive bending, reaching and lifting actions involving material weighing in excess of 10 pounds up to 75 pounds. Ensure housekeeping duties are performed as a priority to ensure a clean, safe and orderly plant environment. Monitor production and material supplies. Notify appropriate personnel of shortage prior to running out. The ability to use fillet gauges, calipers. May perform other duties or work at different workstations as production needs require. Qualifications Qualifications: The ability to use fillet gauges and calipers. The ability to read and understand blue prints and weld symbols. Current welding certification is preferred Minimum Requirements: High school diploma or General Education Degree (GED) Two or more years of welding experience. Familiarity with over head crane. Must be able to pass initial testing. Must be able to work overtime based on business needs. Additional Information All your information will be kept confidential according to EEO guidelines.

Robotic Weld TechnicianTaylor, MI Company is a fabrication facility Shift and Pay: 2nd shift: 3pm to 11pm | $16/hr + $2/hr shift premiun = $18/hr May have to train on the day shift for the 1st few weeks Duties:-Follow work instructions as assigned-Operate MIG welding robot -Must be able to pass a MIG welding test! Lots of opportunity for growth within the company. 90 day to hire position #IND3

For more than 50 years Progressive Metal Manufacturing Company has fabricated high quality metal parts, from the completed delivery of virtually any type of component, fabrication, or assembly. We are ISO/TS16949:2009 Third Edition Certified with the experience, equipment, and talent to produce virtually any type of assembly, fabrication, or component. We specialize in prototype and short run jobs of 50,000 pieces or less. We have all the necessary tools, machinery and manpower to complete our customer's projects, from initial design to completed parts. Progressive Metal Manufacturing Company, founded in 1962, has over 70,000 square feet of manufacturing space located in Ferndale, Michigan. Our capabilities include: manufacturing all types of ferrous and non-ferrous metals for the automotive, truck, farming equipment, defense, and commercial industries. To the qualified candidate we offer: Medical and Dental Insurance, Life Insurance, Paid Vacation, 401K with company match, Paid Holidays, STD/LTD Disability Insurance, Vision, Profit Sharing, and more! Job Description Primary Responsibilities: Skilled at MIG welding with both Aluminum and Steel Performs weld operations using equipment and materials according to Production Package. Sets and adjusts production equipment and materials to ensure defect free welds. The ability to interpret engineering drawings and weld symbols. Regularly inspect in-process and finished parts for defective welds according to work instructions and procedures. Ensure quality standards are met to achieve zero defects. Repair welds using various welding techniques. Place or pack finished parts into designated containers and ensure proper labeling as instructed. Ensure all labels are legible and accurate to finished part. The ability to correctly set-up various welding machines (amperage, voltage, speeds, and pulse) maximizing their efficiency and effectiveness per application. Complete required paperwork and computer entries as required. Ensure accuracy of all entries. The ability to work overtime as required. Immediately inform leader or member of management of any machine malfunction, production quality, material requirements or safety issues. Performs repetitive bending, reaching and lifting actions involving material weighing in excess of 10 pounds up to 75 pounds. Ensure housekeeping duties are performed as a priority to ensure a clean, safe and orderly plant environment. Monitor production and material supplies. Notify appropriate personnel of shortage prior to running out. The ability to use fillet gauges, calipers. May perform other duties or work at different workstations as production needs require. Qualifications Qualifications: The ability to use fillet gauges and calipers. The ability to read and understand blue prints and weld symbols. Current welding certification is preferred Minimum Requirements: High school diploma or General Education Degree (GED) Two or more years of welding experience. Familiarity with over head crane. Must be able to pass initial testing. Must be able to work overtime based on business needs. Additional Information All your information will be kept confidential according to EEO guidelines.

Prototype automotive company in Sterling Heights is hiring. Experienced Body in White joining assembler. Should be versed in joining applications to include:RSW = Resistance spot welding PW = Projection WeldingGMAW = Gas metal arc welding ( also referred to as MIG) GTAW = Gas tungsten arc welding ( also referred to as TIG) SPR = Self piercing rivets ClinchCandidate needs to know at least 2 of the above items, and be self sufficient. Text Denisa at ********** if interested.