Welder Jobs in Penn, PA

Welder (FCAW & GTAW) Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com . Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

We are looking to bring a welder to join our team! The ideal candidate will be able to perform different types of welding throughout the work day and has prior experience working with Mig welding. **Pay/Shift/Opportunity** + Starting pay at $25+ an hour (based on experience) + **DAY** shift! + Monday - Thursday + Optional overtime Friday - Saturday + Great opportunity to grow within the company **Responsibilities** + Perform welding on stainless steel + Read blueprints and follow work instructions + Perform Flux Core and MIG welding ****APPLY IMMEDIATELY TO INTERVIEW**** **Pay and Benefits** The pay range for this position is $47840.00 - $56160.00/yr. PTO: Year 1-5: 3 Weeks. Year 6-10: 4 Weeks. Year 11+: 5 Weeks. 2 Medical plans to choose from, a preferred provider organization (PPO) plan and a High Deductible Health. Dental, Vision, and HSA plans available as well as 401k options. **Workplace Type** This is a fully onsite position in Duquesne,PA. **Application Deadline** This position is anticipated to close on Apr 28, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Now Hiring Experienced Welders | 2nd shift New Kensington, Pa Wage $19 - $26 per hr, based upon experience and interview- annual reviews and schooling! Submit your resume to discuss. Top Benefits: Vacation time Pay increase 401K after 1 year Annual reviews Schooling program Incentives for referring family or friends Health, dental, and vision NO WEEKENDS TO APPLY: Submit your resume to the job posting Full time employer with steady work, healthy back log, and over time opportunities. Additional work opportunities available, know someone looking for work? Refer a friend and earn. Job Description: 1. Utilize MIG, TIG and Flux core welding techniques. 2. Grind welds once completed. 3. Utilize blueprints. 4. Other duties assigned Shift and pay rate: 2nd shift available Monday through Friday Overtime as needed Must Haves: 1. ON THE JOB experience with MIG, TIG, and Flux welding. 2. Must complete a weld test with following welds: TIG with fillers, Grind Test, MIG (Flat, Vertical Down, V-Groove, and Filet weld). 3. Ability to read and interrupt blueprints. 4. Ability to pass a criminal background check and 5panel drug screen. 5. Able to perform general physical activities common to the welding trade. 6. Reliable transportation to and from job site. If interested, please submit your resume and we will contact you regarding the next steps. #TradeWorX #WorkWithTheBest #TradeWorX-Industrial

Welder FLSA Status: Non-Exempt Frontier Railroad Services has the unique blend of expertise and experience that will ensure customer satisfaction. Our leadership team has over 25 years specializing in railroad rehabilitation and construction. Job Description Perform welding work utilizing Railtech Boutet or Orgo-Thermit Thermite Welding Processes. Properly maintain equipment and follow all company and Federal Railroad Administration (FRA) policies and procedures. Maintain valid driver's license, CDL preferred and medical card to operate heavy vehicles. Perform quality work with limited supervision on time and on budget. Duties & Responsibilities Ensure compliance with all railroad rules and regulations for safety, operations and the Federal Railroad Administration (FRA). Basic track work duties; spiking, anchoring and surfacing Examines work pieces for defects and measures work pieces to ensure conformance with specifications. Performs routine preventive maintenance on small and large industrial equipment. Detects faulty operation of equipment or defective materials and notifies supervisors. Operates equipment per safety policies, rules and regulations. Inspects equipment, diagnoses problems and notifies supervisor of the need to the repair equipment. Keeps records and prepares reports of maintenance work and cost of work. Inspect all equipment daily to ensure proper functionality. Perform grinding tasks using power and hand tools. Clean work pieces to remove impurities, such as slag, rust and grease. Inspect weld after grinding to check for hairline cracks or any visible defects. Operate heavy duty trucks to carry equipment to and from the work site. Physical Requirements: Mobility to participate in frequent travel to and from the project location; ability to operate heavy equipment; lifting of up to 100 pounds in the performance of duties. Agility to navigate into confined spaces if necessary. Environmental Conditions: Performs duties in multiple environments including outside construction project settings, in and around moving vehicles and equipment. Exposure to weather elements; must wear appropriate PPE required for the project site. Qualifications: Must have documented experience and proficiency welding in a railroad construction environment. Possess a current driver's license, CDL preferred and DOT medical card. Extensive travel is required. Must pass drug screen including urine and hair screen. Must pass criminal background check. May be asked to pass practical skills assessment. Salary and Benefits Competitive wage. Medical, Dental and Vision Benefits. Life insurance and disability. 401k Retirement Plan. Discretionary profit sharing bonus. Daily per diem in most cases. Hotel and travel expenses paid in most cases. Scheduling with an emphasis on work/life balance. Opportunity for advancement in our growing company. Unfortunately, due to the volume of applicants, we can only contact individuals who are the best fit for the requirements of the position. EEO Statement: Frontier Railroad Services provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, Frontier Railroad Services complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence or compensation

About the Role Pennsylvania Mount Pleasant Company Siemens Energy, Inc. Organization Gas Services Business Unit Service North America Full / Part time Full-time Experience Level Early Professional A Snapshot of Your Day: You will be engaged in performing welding operations for turbine generator field services equipment. With extensive travel and all business expenses paid. How You'll Make an Impact: * Be engaged in performing welding operations to meet the required manufacturing and engineering specifications for turbine generator field services equipment. * Ability and willingness for Heavy Travel (75% or more) ... All business expenses are paid) * Ability and willingness to work a high percentage of overtime - including 12-hour shifts. * Mechanical skills for precision assembly of turbine blades and components including hand riveting What You Bring: * High School diploma or equivalent required * Minimum 2 years training leading to a degree or certificate from a technical/trade school or apprentice program in welding or manufacturing. * Minimum of three years welding experience * Skilled in use of manual SMAW, GTAW, GMAW, FCAW welding processes * Capable of passing 6G position heavy wall weld test using both GTAW and SMAW process on both carbon and stainless steel * Basic computer skills to complete job-related expenses * Ability to pass drug screen and extensive background investigation. Must also be able to obtain unescorted nuclear plant access. Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. About the Team Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. Who is Siemens Energy? At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Check out this video to learn more about Siemens Energy: ******************************************** Our Commitment to Diversity Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. Rewards * Career growth and development opportunities * Supportive work culture * Company paid Health and wellness benefits * Paid Time Off and paid holidays * 401K savings plan with company match * Family building benefits * Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy or Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. EEO is the Law Applicants and employees are protected under Federal law from discrimination. Click here to read more. Pay Transparency Non-Discrimination Provision Siemens Energy or Siemens Gamesa Renewable Energy follows Executive Order 11246, including the Pay Transparency Nondiscrimination Provision. Click here to read more (.PDF). California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.

As a welder at SMS Group you will be able to analyze the assignment and determine the most effective procedure. The welder assembles, fits, tacks, and welds a variety of complex fabrications and assemble. You must be able to work in a team environment, as well as solo on projects. The right candidate will possess written and verbal skills, reasoning, math and language skills, and be able to follow all safety protcol. . Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. **************** What you'll do Work from drawings, sketches, and a minimum of instruction. • Assemble parts in proper sequence, place bracing in correct location to minimize distortion. • Perform welding operations such as arc, MIG, TIG brazing and burning in all positions on a variety of metals. • Operate drill press to make parts for fabrication. • Utilize crane and material handling equipment. • Use precision measuring tools. • Follow instructions and established procedures. • Record measurements, record pertinent information as required. • High school diploma or GED preferred. • Read and interpret prints, including welding prints • Weld per SMAW, GMAW, GTAW standards; vertical up, vertical down, and horizontal • Plasma arc cutting • Air carbon arc cutting • Pipe bending, fitting, welding, and threading • Use horizontal and vertical saws, torch, and cut off wheel • Set up and operate all welding machines, be able to do basic troubleshooting • Set up and operate all machines in the fabrication area, be able to do basic troubleshooting What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.

TIG WelderCrafton, PA$22.00 to $28.00 hourly to startM to F – 6:30 am to 4:00 pm Benefits – Offered after probationary period. Summary: A metal fabrication company is currently hiring a TIG welder to join their team. Ideal candidates have experience working in a custom metal fabrication shop and can work from blueprints. Qualifications: 1 year of on-the-job TIG welding experience is required Ability to read drawings/blueprints Ability to work with stainless steel, carbon steel, and other metals Must be able to lift 50lbs unassisted Steel toe boots are required High school diploma or GED is required Ability to pass a pre-employment drug screen and background check Requirements: Welding experience HS Diploma or GED Steel-Toe Boots Prefer some tech school (certifications are not required) Able to lift 50lbs unassisted Employment contingent on criminal background screen and drug test. We are an EOE.We are an EOE.

We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Full-time Description · Apply welds per AWS D1.1 Structural Welding Code - Steel and or PTTI weldment standards and WPS. · Layout and fabricate materials according to engineered drawings, sketches, written work instructions and verbal instructions. · Do minor repairs to welding equipment and burning equipment. · Use engineered drawings, sketches, written work instructions and verbal instructions to layout tanks, tank assemblies, covers, cover parts, conservator, and conservator parts, side frames and end guides. · Hand burn and grind. Layout and shoot studs per engineered drawings. · Check work per drawings. Pick up and move material/parts. · Remove material from storeroom and complete the draw card. · Keep weld/fabrication cell clean, neat, and safe always. · Carry out other duties assigned by supervisors. Must be able to work steady 2nd shift. ________________________________________________________________ Tools and equipment: Welding equipment, burning equipment, remote overhead cranes, jib cranes, manlifts, forklifts, chippers, grinders, needle scalers, manlifts, ladders, tape measures, scribes, squares, levels, punches, hammers, sledgehammers, pliers, wrenches, screwdrivers, wire brushes, chipping hammers, jigs, dyes and penetrant. ________________________________________________________________ Personal Protective equipment: Safety glasses, leather steel toed work boots, welding gloves, burning gloves, welding hood, burning shield, flame retardant clothing, fall protection, respirator, work gloves, hearing protection. ________________________________________________________________ Physical demands and work environment: The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential job functions. Physical demands: While performing the duties of this job, the employee will be required to stand for periods of time, sit for periods of time, kneel for periods of time, crouch or crawl, balance, stoop, use arms, fingers and hands, talk, listen. Be able to climb ladders. The employee must occasionally lift and or move up to 60 pounds. Specific vision requirements must be met to perform the position of welder/fitter. Welder/fitters shall have passed an eye examination with or without corrective lenses to prove near vision acuity of Jaeger J-2 at a distance of 12-17 inches. With an eye exam repeated every three years. Work environment: While performing the duties of welder/fitter the employee will be exposed to welding smoke, welding fumes, grinding dust, U.V. and I.R. light, heat, penetrating sounds, and elevated decibel levels, hot sparks and spatter, and molten steel. ________________________________________________________________ Education: GED or High School diploma, Vocational Training in Welding. ______________________________________________________ Requirements Education: High School or GED, Must pass welding tests. Salary Description $23.20-$24.20

The primary focus of the Welder position is to safely fabricate and install as necessary all structural and misc. steel work in accordance with the design documents. This position requires several welding certifications outlined below as well as general construction knowledge. All general welding, fabricating and erection best practices and industry standard applications apply. This position is expected to work within a 90-mile radius of the city of Pittsburgh, and will be an employee of the Pittsburgh, PA office location. Our Success Story: It all started in 1997 when Joe Leonello and his father started their own construction firm. They were soon joined by Joe's brother, Frank, in 2003 and, thus, the Franjo legacy was born. Since its inception, we strive to exceed our client expectations by consistently improving our products and services. We are always on the lookout for the top talent in the industry as we consider our employees one of our greatest assets. We truly celebrate our employee milestones and successes in our industry because without our employees, we would not be where we are today! We have been voted Top Workplace by our employees for 4 years in a row and have also been featured in the Pittsburgh Business Times as one of Pittsburgh's Fastest Growing Companies, Largest Area Construction Contractors, and Family Business Awards winners! Our Mission Safety, Respect, Accountability, Efficiency, Empowerment, Creativity, Loyalty... We feel strongly about every one of those, but we also feel they are the minimum every company should abide by. So, what makes us different? How do Franjo team members operate? Well, we speak to each other with radical candor. We work hard so we can play hard. We have each other's backs. We are committed to building a legacy - the Franjo Legacy. Our Mission: Uniting our team and customers to build the future. Our Vision: Exceeding expectations. Building trust. Creating value. Our Values: Persistence - Never give up. Ambition - Driven to achieve the unimaginable. Confidence - Humble enough to learn from experience. Does that align with your ideals and core values? Well, great news! We are looking to add a Welder to our growing team! What you'll do: * Ability to safely operate all types of steel working equipment and hand tools. * Knowledge of structural steel assemblies/details typically used in commercial building construction. * Welding certificates in MIG, Fluxcore, and Stick Welding or have proven, proficient relevant experience in lieu of certificates. * Able to read all drawings and associated design documents. * Structural and misc. fabrication experience. * Perform layout, cutting, and welding as specified by shop drawings for both structural and misc. steel operations. * Knowledge of fabrication shop safety and best practices. * Fabricate beams, columns, angles, plates, and connections per the design documents. * Cutting experience to include torch, plasma, mechanical and grinding. * Erection experience to include rigging, field welding and bolted assemblies as required, general structural/misc. erection skills and hand signal training. * Safely operate under OSHA standards fall protection guidelines. Certified fall protection training required. * Safely operate all equipment to perform daily erection activities including but not limited to man-lifts, scissor lifts, forklifts, stud machines etc. * Safely erect, maintain and dismantle scaffolding systems for daily construction activities. * Safely load and unload building material deliveries. * Maintain production quantities as outlined by the project schedule. * Respond in an expeditious and timely manner to all work requests regarding fabrication and erection expertise. * Assist in loading and unloading building material. * Provide input on jobsite logistics, organization, layout, equipment, and manpower utilization. * Clean project site/fabrication shop and maintain order with all tools and equipment. * Have knowledge of foundations, building structures and construction sequencing. * Mold, shape or form all metals. * Perform clean-up procedures. * Adhere to comprehensive project safety and security programs as defined in the company safety program in accordance with all applicable safety codes and regulations. * Meet with the Safety Director and complete mandatory safety training prior to start of employment. * Additional tasks as necessary and/or assigned. What you'll need to be familiar with: * Results driven. * Strong project and time management. * Strong communication, leadership, and problem-solving skills. Your success story: Completion of apprentice/vocational program or an equivalent combination of training/education and a minimum of 5 years field or fabrication shop experience. What we offer you in return: Competitive salary and benefits package which includes, medical, dental, and vision, 401(k), employee wellness, supplemental insurance, paid time off, education and training, quarterly jobsite lunches, holiday parties, and so much more! Do you have additional questions? Please reach out to our Human Resources Manager for more information! What are you waiting for? Apply today! Franjo Construction Corporation is an Equal Opportunity Employer. Must be able to pass a 7 year background check. We also conduct pre-employment drug testing. Job offers are contingent upon the successful completion of a background investigation and pre-employment drug screen.

Job Details Scottdale, PA Full Time High School None Day ManufacturingDescription Must have through knowledge of welding principals of metals, welders and blueprint drawings. Transform a set of tubes sections and elbows into a complete furnace coil. Ensure proper positioning and alignment of the parts and proceed with the first control of the coil once fully assembled. Master different welding techniques. (GTAW AND SMAW) 1) Welds and Fabricates metal components together or repair products 2) May be required to pass employer performance tests or standard tests to meet certification standards or governmental agencies or professional and technical associations.

Calgon Carbon | A Kuraray Company currently has an opportunity where you can be a part of our growing team as we provide our customers with outstanding products that make the air we breathe and the water we use safe for generations to come. Welder I Location: Equipment & Assembly Plant - Pittsburgh, PA Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, dress for your day, hybrid schedules, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 9:00 AM - 5:00 PM, 40 Hrs/Wk - 3 shift operation An entry level position under the supervision of the E&A supervisor or group leader, the Welder I will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. The Welder I will comply with all Company and Safety Policies and procedures in the performance of assigned duties. The Welder I performs tack welding and finish welding of piping systems utilizing both SMAW, FCAW, and GMAW welding procedures. Certification to CCC procedures is required. The Welder I welds vessels and structural components utilizing SMAW, FCAW, and GMAW welding processes. Performs these procedures to meet CCC certified procedures. The Welder I inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs. The Welder I will operate Fork trucks, jib cranes and overhead crane after training. The Welder I assist in other areas of the plan as assigned. Duties and Responsibilities (not limited to) * Complying with company policy * Material handling/movement * Welding Qualifications * High school diploma or general education degree (GED) is required * Associates degree (A.A.), or equivalent from two-year college or technical school is preferred * 2-3 years welding experience is required * ASME code welding is preferred More about Calgon Carbon, A Kuraray Company We are a company of scientific innovators with over 205 patents. For over 75 years, we've been innovating solutions to the world's emerging challenges. Since creating the first activated carbon products from bituminous coal in the 1940s, Calgon Carbon has been a pioneer in developing advanced products, systems and services for air and water purification. Calgon Carbon's product portfolio now encompasses more than 700 direct market applications. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,350 people and operates 20 manufacturing, reactivation, innovation and equipment fabrication facilities in the U.S., Asia, and in Europe, where Calgon Carbon is known as Chemviron. Calgon Carbon was acquired by Kuraray in March of 2018. With complementary products and services, the combined organization will continue to focus on providing the highest quality and most innovative activated carbon and filtration media products, equipment, and services to meet customer needs anywhere in the world. Calgon Carbon is an Equal Employment Opportunity/Affirmative Action Employer. Minorities/Females/Individuals with Disabilities/Protected Veterans VEVRRA Federal Contractor

We are looking to bring a welder to join our team! The ideal candidate will be able to perform different types of welding throughout the work day and has prior experience working with Mig welding. **Pay/Shift/Opportunity** + Starting pay at $25+ an hour (based on experience) + **DAY** shift! + Monday - Thursday + Optional overtime Friday - Saturday + Great opportunity to grow within the company **Responsibilities** + Perform welding on stainless steel + Read blueprints and follow work instructions + Perform Flux Core and MIG welding ****APPLY IMMEDIATELY TO INTERVIEW**** **Pay and Benefits** The pay range for this position is $47840.00 - $56160.00/yr. PTO: Year 1-5: 3 Weeks. Year 6-10: 4 Weeks. Year 11+: 5 Weeks.2 Medical plans to choose from, a preferred provider organization (PPO) plan and a High Deductible Health. Dental, Vision, and HSA plans available as well as 401k options. **Workplace Type** This is a fully onsite position in DUQUESNE,PA. **Application Deadline** This position is anticipated to close on May 4, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work. Prepare materials for welding, fit the components, and perform welding process per drawing specification. Weld components in all positions consistent with quality requirements. Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols. Monitor the fitting, burning, and welding process to avoid overheating of parts. Use tools of measurement for checking dimensions of parts, work to tolerances. Visually examine welds for quality. Operate hand and power tools common to the welding trade. Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment. Maintain work area in safe, clean, and orderly condition. Operate various types of automatic, semi-automatic or manual welding equipment to join metal segments using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and submerged arc welding. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Minimum and Preferred Qualifications: High school degree or equivalent required. Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.) Ability to read blueprints and transfer blueprint information to material. Minimum of 2-4 years welding in heavy plate manufacturing required. **MUST pass 2G and 3G FCAW weld tests

**A Snapshot of Your Day:** You will be engaged in performing welding operations for turbine generator field services equipment. With extensive travel and all business expenses paid. **How You'll Make an Impact:** + Be engaged in performing welding operations to meet the required manufacturing and engineering specifications for turbine generator field services equipment. + Ability and willingness for Heavy Travel (75% or more) ... All business expenses are paid) + Ability and willingness to work a high percentage of overtime - including 12-hour shifts. + Mechanical skills for precision assembly of turbine blades and components including hand riveting **What You Bring:** + High School diploma or equivalent required + Minimum 2 years training leading to a degree or certificate from a technical/trade school or apprentice program in welding or manufacturing. + Minimum of three years welding experience + Skilled in use of manual SMAW, GTAW, GMAW, FCAW welding processes + Capable of passing 6G position heavy wall weld test using both GTAW and SMAW process on both carbon and stainless steel + Basic computer skills to complete job-related expenses + Ability to pass drug screen and extensive background investigation. Must also be able to obtain unescorted nuclear plant access. Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. **About the Team** Gas Services Our Gas Services division offers Low-emission power generation through service and decarbonization. Zero or low emission power generation and all gas turbines under one roof, steam turbines and generators. Decarbonization opportunities through service offerings, modernization, and digitalization of the fleet. **Who is Siemens Energy?** At Siemens Energy, we are more than just an energy technology company. With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation. Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation. Check out this video to learn more about Siemens Energy: ******************************************** **Our Commitment to Diversity** Lucky for us, we are not all the same. Through diversity, we generate power. We run on inclusion and our combined creative energy is fueled by over 130 nationalities. Siemens Energy celebrates character - no matter what ethnic background, gender, age, religion, identity, or disability. We energize society, all of society, and we do not discriminate based on our differences. **Rewards** + Career growth and development opportunities + Supportive work culture + Company paid Health and wellness benefits + Paid Time Off and paid holidays + 401K savings plan with company match + Family building benefits + Parental leave ************************************ Equal Employment Opportunity Statement Siemens Energy is an Equal Opportunity and Affirmative Action Employer encouraging diversity in the workplace. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law.

Now Hiring Welders | 1st Pittsburgh PA, Pa Wage up to $23/hr, based upon experience and interview- annual reviews and schooling! Submit your resume to discuss Top Benefits: Top Benefits: Medical (company paid at 50% for individual benefits) Dental & Vision 401k (with financial advisor) Paid Holidays (six in total) PTO Company Paid Group Life Insurance Accident and Critical Illness Policies Additional Perks available! TO APPLY: Submit your resume to the job posting Job Description: 1. Utilize MIG, Stick and Some Tig welding techniques. Welding various carbon steel, aluminum and stainless-steel components to form stairs, railings etc. 2. Study and interpret blueprints, sketches, or other technical drawings to get proper dimensions for welds. 3. Ability to calculate and measure dimensions of components to ensure accuracy. 4. Familiarity with torches, grinders, drilling in accordance to job specifications. 5. Maintaining equipment, machinery, and clean working environment. Shift and pay rate: 1st shift available 6 to 2: 30 pm Monday through Friday Overtime as needed Must Haves: 1. ON THE JOB experience with MIG, Stick welding experience. 2. Must complete a weld test Mig pipe test, T Plate Test 3. Ability to read and interrupt blueprints. 4. Ability to pass a criminal background check and 5panel drug screen. 5. Able to perform general physical activities common to the welding trade. If interested, please submit your resume and we will contact you regarding the next steps. #TradeWorX # WorkForYou #TradeWorX-Pittsburgh

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire welders to join our Pittsburgh Local Tank Crew. Our Pittsburgh Local Crew builds and repairs tanks in the Pennslyvania and the surrounding states. Frequent travel is required in the region. When not traveling, the crew works in our Braddock shop. We are looking for individuals who are good working with their hands, enjoy making things, and want to learn how to weld. We will teach you how to weld storage tanks and make custom fabricated parts and assemblies. Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.