Welder Jobs in Norfolk, VA

CTR Group is seeking several Pipe Welder’s for our client in Norfolk, VA. Immediate openings and urgently hiring! What We Offer: Weekly Pay – you receive a paycheck every week Comprehensive Benefits Package Safety First! Pay: $36 PLUS per diem for non-local RESPONSIBILITIES: Read and interpret basic drawings and weld symbols Pass weld test for all Company weld procedures in the 6GR position Pass Company TIG weld test procedure for Carbon Steel, SS and CUNI pipe Work to Company housekeeping procedure Inspection of work, identification of potential problems, initiation of corrective actions Increase awareness of Quality procedures within department Perform as a productive working team member that meets daily goals set by the supervisor Continuously improve communications and flexibility within the team Help build the team environment Build pride of workmanship and quality through on job training Contribute towards innovation / productivity improvements Assist in the control of waste elimination, e.g. materials, consumables etc Assist supervisor to maintain control of department equipment and its maintenance Must have full set of personal tools Work towards the team goal of delivering the vessel on time Always be ready to start shift on time Follow Company guidelines and procedures Do not leave job early or return late from break times Ensure work area is left clean, all equipment and tools are stowed away safely and protected against damage REQUIREMENTS: Must be able to TIG Carbon, Stainless steel, and Copper Nickle Pipe Ability to pass “A Class” skills validation test to demonstrate welding ability for restricted open root welds Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel Must have the ability to bend, squat, stoop, crawl, and kneel Perform prolonged standing Ability to turn head from side to side and about the vertical axis Lift/push/pull 50lbs on an occasional basis Lift/push/pull up to 20lbs on a frequent basis Must have the ability to climb in a safe manner (climbing as a minimum includes stairs, scaffolding, ladders, and ramps) Ability to work at heights above 12’ while working from ladders, scaffolding and/or man lifts Able to work at a variety of levels (ex. waist, eye, overhead) Demonstrate the ability to safely and appropriately use required tools and equipment Demonstrate good balance while working on uneven surfaces and maneuvering obstacles Possess sufficient handgrip and coordination to carry and operate tools and equipment Ability to utilize personal protective equipment (hard hat, safety glasses, steel-toes shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.) safely per OSHA standards Ability to withstand cold and hot temperatures Ability to enter 18” x 36” openings and work in confined spaces for prolonged periods of time within OSHA guidelines Able to respond to verbal and audible sounds/commands Able to utilize adequate visual skills Ability to fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down Ability to perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Must be able to tour all vessels and work sites While performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear The employee is occasionally required to sit Candidates must meet the following employment eligibility guidelines to be considered for employment: 18 years of age or older at time of application Able to provide proof of US Person Status Willing to submit to a drug screen Willing to submit to a background check Must comply with company, federal, state, and local safety and environmental rules and regulations while performing daily job tasks About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. Pay rate is up to $26 + $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Call or Text Shantal (858)717-1672

We are seeking a skilled Welder to join our team working on the Ship to Shore Connector program. The ideal candidate will have experience welding 3mm and 10mm plates, with a strong background in MIG and TIG welding, specifically aluminum and mirror welding. **Responsibilities** + Perform welding on the Ship to Shore Connector program. + Weld 3mm and 10mm plates. + Execute mirror welding tasks. + Read and interpret blueprints and sketches. + Apply shop mathematics for precise fabrication. **Essential Skills** + Experience in aluminum welding. + Proficiency in MIG welding with at least 5 years of experience. + Proficiency in TIG welding with at least 3 years of experience. + At least 3 years of mirror welding experience. + Ability to read blueprints and sketches. + Strong fabrication skills. **Additional Skills & Qualifications** + Formal craft training is preferred. + Demonstrated welding skills based on the results of the welding test. + Three plus years of related MIG and TIG aluminum experience. + Mirror welding experience is preferred but not required. **Why Work Here?** We offer a range of benefits and opportunities to our employees, including a Wellness Program with Fitness Reimbursement, comprehensive Medical, Dental, and Vision coverage, a 401(K) plan with company funding, and Paid Parental Leave. Our commitment to employee wellness and professional growth makes this a great place to work. **Work Environment** This role is based in an outdoor covered production/shop environment, with approximately 230 people currently employed at this location. **Job Type & Location** This is a Contract position based out of New Orleans, Louisiana.A **Pay and Benefits** The pay range for this position is $28.75 - $28.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Newport News,VA. **Application Deadline** This position is anticipated to close on Mar 27, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: Atlantic Constructors is dedicated to providing its employees and their eligible family members with a wide range of benefits. From competitive benefits to on-site wellness programs, we provide resources to support you and your family's health, well-being and happiness. We have created a comprehensive benefits package that includes: * Medical Insurance Plans * Dental Insurance Plan * Vision Insurance Plan * 401(K) Retirement Plan with Generous Company Matching * Health Savings Plan Atlantic Constructors offers competitive benefits, for more information check out our comprehensive list on our website. Summary/Objective: Lay out, fabricate, assemble pipe in the field and fab shop; install and maintain industrial production and process piping and welding systems. Essential Functions: * Knows the properties of various rods and fluxes used in welding metals * Read and interpret sketches, blue prints, and isometric plans/drawings * Able to measure routings of pipe and fabricate pipe to fit existing in-line piping system; utilize instrumentation cut sheets to do take outs for fabrication of spool pieces * Plan and layout sequence of installation to avoid obstructions * Cut pipe using port-a-band saw, reciprocating saw, pipe cutters, power saw, cutting torch, and pipe cutting machine * Assemble, fabricate and install variety of metal pipe and pipe fittings for both carbon steel and stainless steel * Installation of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. * Secure pipe to structure with clamps, brackets, and hangers using hand tools * Remove slag and rough spots with a portable grinder, file or scraper as necessary * Determine required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques * Work within precise limits or standards of accuracy * Rely on instructions and pre-established guidelines to perform the functions of the job * Plan work and select proper tools * Work at heights without fear * Clean, bevel, prepare and install pipe with various fittings and weld joints * Perform layout, rigging and transportation of pipe, valves and fittings * Thread pipe using threading machine * Assemble and install a variety of metal or nonmetal pipe and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints and hand tools * May assist in lifting, positioning and securing of material and work pieces during installation * Respiratory protection is common and may be required * Responsible for observing and complying with all company, safety and project policies * Performs other duties as assigned Supervisory Responsibility: No Required: * 3+ years of experience with TIG and Stick pipe welding with various techniques including electric, gas, arc, or other equipment; or equivalent combination of vocational training and experience * Must pass ASME pipe welding test and background check * Knowledge of commonly-used concepts, practices and procedures * Knowledge of industrial mechanical systems * Field verify, routing, pipe systems prior to fabrication * Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills * Must be able to pass post-offer pre-employment drug screen, and may be required to satisfactorily complete additional background checks as required (i.e. DMV, criminal history) * Must adhere to all company policy and procedures * Must be available, and have the means to report to multiple job sites as assigned The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: * May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold and dampness * May be required to use hearing protection in and around areas with moderate/high exposure to high noise levels * May be required to use respiratory protection when working in areas with fumes, or airborne particles including dust * May be required to work in confined spaces or at heights Physical Demands: * This role routinely uses construction equipment such as heavy machinery, hand and power tools * While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs. * Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms * Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus Travel: * May require travel (typically not overnight) Preferred: * Prior military experience * HS diploma or GED equivalent Pipe Fitter Welder, Pipe Fitter Welder, Pipe Fitter Welder

Hutco, Inc. Position: Pipe Welder J4 Location: Norfolk, VA Shift: All shifts available Security Clearance: No Clearance Required Pay Rate: $27.00 per hour Posting Start Date: January 28, 2025 Hutco, Inc. is seeking experienced Pipe Welders (J4) to join our Pipe Shop in Norfolk, Virginia. This position involves high-quality welding of various metals and pipe joints in accordance with military and industry standards. The ideal candidate will have extensive experience with TIG and stick welding processes, as well as the ability to work on different types of pipe materials, including carbon steel, stainless steel, and copper-nickel alloys. Job Responsibilities Journeyperson 4 (J4) - Pipe Welder Perform welding in accordance with Tech-Pub-278, Tech-Pub-248, MIL-STD-1689, and proper joint designs per MIL-STD-22D. Proficient in welding all types of materials, including TIG and stick welding on plate and pipe. Weld various piping joints such as sockets, butts, E.B rings, backing rings, and open butts. Work with a variety of metals, including copper-nickel (CuNi), Monel, stainless steel, aluminum, and carbon steel/chromoly. Set up and operate welding machines such as SYNCHROWAVE 250 and POWCON ST-300 . Troubleshoot TIG lines and welding machines. Utilize mag-base mirrors for TIG and stick welding applications. Work with Metro PCP 912-04 for P-I piping. Journeyperson 3 (J3) - Pipe Welder Understand and apply proper joint designs per MIL-STD-22D. Perform TIG and stick welding on different materials, including carbon steel, chromoly, CuNi, and stainless steel. Weld various pipe and plate joints, including butts, sockets, and backing rings. Operate welding banks and have some knowledge of welding machines such as SYNCHROWAVE 250 and POWCON ST-300 . Troubleshoot TIG lines and welding equipment issues. Journeyperson 2 (J2) - Pipe Welder Basic understanding of weld joint designs. Perform stick welding with a willingness to learn TIG welding. Some experience with various metals is helpful but not required. Ability to operate welding banks. Journeyperson 1 (J1) - Pipe Welder Perform stick welding on fillet and butt joints. Willingness to learn advanced welding procedures. Must be able to pass a 6-G carbon steel pipe welding test . Qualifications & Skills Experience: Extensive experience in pipe welding, with a strong background in both TIG and stick welding. Technical Knowledge: Familiarity with military and industry welding standards. Equipment Proficiency: Ability to operate welding machines and troubleshoot equipment issues. Precision & Quality: Ability to work with tight tolerances and perform high-quality welds on various metals. Safety Compliance: Knowledge of welding safety protocols and PPE usage. Work Environment & Physical Requirements Ability to work in confined spaces and at heights as required. Must be able to lift up to 50 lbs. Exposure to welding fumes, heat, and various industrial work conditions. Requires standing, bending, and kneeling for extended periods. How to Apply Apply Online or contact us directly to learn more about this opportunity. Contact: Hutco, Inc. - Portsmouth Branch 📞 Phone: ************** 📧 Email: ************************ Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Venture Dynamics is in need of Pipe Welders for local work opportunities. Work will be performed on ships in all stages of repair and modernization. Pipe Welders will cut/torch and weld metal surfaces or pipe using various types of welding equipment. Provide quality welding on socket weld pipe joints from 1/4" O.D. to 2" IPS and butt weld pipe joints from 1-1/2" IPS to 14" IPS. Piping fit-ups of various piping systems and configurations.. Weld processes will be performed on various materials in the shop/on table as well as onboard the ship/in position. Pipe Welders are responsible for maintaining housekeeping, keeping worksite free of waste and keeping materials and equipment stowed in an orderly manner. The performance of other duties will be as assigned by Supervisors. Welding is performed on a wide variety of materials/Ferrous and Non-Ferrous utilizing an even wider range of welding processes, such as GTAW, SMAW and FCAW. Knowledge of tig welding procedures and various types of welding equipment • Knowledge of torch cut, pipe clean, and true weld pipes without leaks in positions with minimum clearance. • Knowledge of use and limitations of 6011, 6010, and 7018 and/or silver-braze rods • Knowledge of basic marine piping systems and military specifications • Familiarity and compliance with NAVSEA Mil. Std. 22-D, tech manuals 248 and 278 in order to maintain quality standards • Must be able to use hand tools and power tools safely and efficiently • Determine job sites, particularly those involving combustible material, are safe for personnel • Must be able to read and interpret weld symbols and blue prints, schematics and job specifications • Must certify to Navy/ABS certification test for the following: 1)pass vision test 2) pipe in the 6GR position, 11018 filter, 70s2 filter, 316 filter, RN67filter and GTAW • Must have own tools • Must have own transportation • Must be US Citizen • Must pass drug and background screening and be eligible to obtain a DBIDS badge for NAVY base clearance View all jobs at this company

JOB TITLE: Pipe Welder REPORTS TO: Production Superintendent The Pipe Welders are responsible for accomplishing work in accordance with work specifications safely, with the highest quality and in a professional manner. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: Prioritize safety and adhere to quality standards during all pipe welding operations. Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW/SMAW Pipe welding. Utilize personal basic tools and equipment for welding tasks if not provided by the workplace. Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities. Adhere to all company policies and rules. Demonstrate keen attention to detail and focus on assigned tasks. Comply with safety regulations and maintain high-quality standards. Collaborate with team members to enhance productivity and efficiency. Assist in preparing pipe products for shipment. Report any hazardous work conditions or practices to the supervisor. Capable of manually lifting raw materials, final products, and packed aluminum items for shipment, weighing up to 60 pounds or using a hoist. SUPERVISORY RESPONSIBILITY None KNOWLEDGE, SKILLS, AND ABILITIES Ability to understand and follow both verbal and written instructions. Have a working knowledge and understanding of welding standards, such as Tech-Pub-278, Tech-Pub-248, MIL-STD-1689 and proper joint designs IAW MIL-STD-22D. Have the ability to weld all types of materials, to tig and stick, weld plate, pipe including piping joints such as sockets, butts, consumable rings, backing rings and open butts. Have experience with various metals such as cuni, monel, stainless steel, alum, and carbon steel. Be able to weld with the use of a mag-base mirror for tig and stick. Be able to trouble shoot problems with tig lines and machines. Pipe testing will be in restricted positions. A willingness to learn and display a dependable work ethic. Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals. Familiarity with the metric system. Capable of standing continuously for extended periods. Willingness to work for 40+ hours per week. EDUCATION AND EXPERIENCE High school graduate or GED Six months to one-year of relevant experience and/or training in aluminum welding. Prior experience with pipe welding is essential. WORKING CONDITIONS Work environment involves exposure to various weather conditions, work in confined spaces or heights, prolonged standing, and physical exertion as well as frequent bending, stooping, and reaching. Noise levels may be moderate to high and may work in close contact with other team members. EQUIPMENT USED Welding equipment and personal protective equipment. REASONABLE ACCOMMODATIONS May be made to enable qualified individuals with disabilities to perform essential job functions.

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

FABRICATION WELDER Essential Duties and Responsibilities: * Plan, lay out, assemble, install, and repair sheet metal parts, equipment, and products, utilizing knowledge of working characteristics of metallic and nonmetallic materials, machining, and layout techniques. * Use hand tools, power tools, welding machines, and shop equipment. * Read, and interpret blueprints, sketches, or product specifications to determine sequence and methods of fabricating, assembling, welding and installing sheet metal products. * Select gauges, types, and quantities of materials according to product specification. * Lay out and mark dimensions and reference lines on material, using scribes, dividers, squares, tape / ruler, and protractors, applying knowledge of shop mathematics and layout techniques to develop and trace patterns of product or parts. * Shape metal material over anvil, blocks, or other forms, using heat, and hand tools. * Cut, grind, file, deburr, smooth, and polish surfaces using hand, and power tools. * Install assemblies in supportive framework according to blueprints, and sketches, using hand tools, power tools, and lifting, and handling devices. * Responsible for keeping work area, machines, and equipment safe, clean, and in good working order. * Detect and troubleshoot faulty operation of equipment and/or defective materials and fix as required then notify management if replacement equipment is needed. * Clamp, hold, tack-weld, heat-bend, grind and/or bolt component parts to obtain required configurations and positions for welding. * Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material. * Use fillet weld gauges, V-WAC gauge, bridge cam gauge for first in line quality checks as welds are completed. * Operate safety equipment and use safe work habits. * Perform work outside of trade when required. Qualifications: * Proficient with the use of trade related hand and power tools. * Must be able to comprehend instructions. * Experience in GTAW Carbon steel, stainless steel and aluminum. * Experience in FCAW of carbon steel and Stainless steel. * Knowledge of a wide range of welding principles, processes, and techniques requiring correct weld joint identification in accordance with MIL-22D or AWS D1.1, and the ability to identify and correct weld defects prior to an NDT inspector showing up on site providing acceptable and constant first-time quality. * Ability to interpret weld symbols and identify necessary weld sizes and joint configuration. * Ability to maintain dimensions and tolerances to specifications. * Ability to weld dissimilar metals. * Ability to weld parts and structures that vary in size, shape, and thickness. * Ability to communicate effectively, work independently or in a group. Minimum Requirements: * High school diploma or equivalent Physical Demands: * While performing these job duties, the employee is routinely required to stand, walk, sit, use hands to finger, handle, or feel objects, tools or controls; use fingers and hands to type or write; reach with hands and arms; talk or hear; taste or smell. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to lift 50 pounds. Work Environment: * This position is performed in a shop environment, with some local travel between facilities. Fairlead Integrated, LLC. and its subsidiaries are proud to be Equal Employ Opportunity and Affirmative Action employers (Minority / Female / Disability / Veterans). To apply for this position, go here: Employment Application - Fairlead Integrated

Mills Marine is looking for a full time Welder. Mills Marine has an extensive benefits package and 401k

Must be DBIDS eligible Qualifications: All safety requirements including safety harness and fire watch Must have in depth knowledge and experience in brazing, welding of pipe, and in gas tungsten inert arc welding (TIG/GTAW). Must have experience in installation, maintenance, and repair of high energy piping systems onboard marine vessels. Able to perform pipe welding requirements to 6G standards, weld in and out of position on various pipe configurations using shielded metal arc (SMAW/Stick) and gas tungsten inert arc (GTAW/TIG) welding processes. Able to read and interpret blueprints. Hours: 1st shift starts at 6AM 2nd shift starts at 3PM Shifts will be 8,9 or 10 hours based on the project that you are working on Pay: Local starts at $32/hour for 1st Class Per Diem available for Non-local

Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime. Pipe Welding Assessment: FCAW Fillet weld plates: · 2F 3F 4F (VT test) *Fillet testing shall take 1-2 hours Steel backing butt joint 6X6 3/8” thick: · 2G 3G 4G (VT and UT test ) *All Butt joint testing takes a welder an average of 1-2 days Butt joint with ceramic backing 12X8 ¾” thick: · 1G 2G 3G (VT and UT test) *All Butt joint testing takes a welder an average of 1-2 days Simulation: · Wraps 2F 3F 36” in length · Diagonal 3F 4F 36” in length · In and out corners 2F 4F 6” · Water tight collar · Air arc fillet welds (VT testing) *All simulation testing takes average welder 1-2 days GTAW Pipe welding assessment · 6G position - 2.5 “copper nickel pipe butt joint schedule 40 (VT and bent test) · 5F, 4F position - 3” copper nickel pipe sleeve 200 (VT and macro etch test) · 5F, 4Fposition - 1” mild steel pipe schedule socket weld 40 (VT and macro etch test) *All pipe testing takes average welder 1-2 days Send resume to ehinojosa@laboronetx.com

Hutco, Inc. Pipe Welder J4 Shift: All shifts available Security Clearance: No Clearance Required Pay Rate: $27.00 per hour Hutco, Inc. is seeking experienced Pipe Welders (J4) to join our Pipe Shop in Norfolk, Virginia. This position involves high-quality welding of various metals and pipe joints in accordance with military and industry standards. The ideal candidate will have extensive experience with TIG and stick welding processes, as well as the ability to work on different types of pipe materials, including carbon steel, stainless steel, and copper-nickel alloys. Job Responsibilities Journeyperson 4 (J4) - Pipe Welder Perform welding in accordance with Tech-Pub-278, Tech-Pub-248, MIL-STD-1689, and proper joint designs per MIL-STD-22D. Proficient in welding all types of materials, including TIG and stick welding on plate and pipe. Weld various piping joints such as sockets, butts, E.B rings, backing rings, and open butts. Work with a variety of metals, including copper-nickel (CuNi), Monel, stainless steel, aluminum, and carbon steel/chromoly. Set up and operate welding machines such as SYNCHROWAVE 250 and POWCON ST-300. Troubleshoot TIG lines and welding machines. Utilize mag-base mirrors for TIG and stick welding applications. Work with Metro PCP 912-04 for P-I piping. Journeyperson 3 (J3) - Pipe Welder Understand and apply proper joint designs per MIL-STD-22D. Perform TIG and stick welding on different materials, including carbon steel, chromoly, CuNi, and stainless steel. Weld various pipe and plate joints, including butts, sockets, and backing rings. Operate welding banks and have some knowledge of welding machines such as SYNCHROWAVE 250 and POWCON ST-300. Troubleshoot TIG lines and welding equipment issues. Journeyperson 2 (J2) - Pipe Welder Basic understanding of weld joint designs. Perform stick welding with a willingness to learn TIG welding. Some experience with various metals is helpful but not required. Ability to operate welding banks. Journeyperson 1 (J1) - Pipe Welder Perform stick welding on fillet and butt joints. Willingness to learn advanced welding procedures. Must be able to pass a 6-G carbon steel pipe welding test. Qualifications & Skills Experience: Extensive experience in pipe welding, with a strong background in both TIG and stick welding. Technical Knowledge: Familiarity with military and industry welding standards. Equipment Proficiency: Ability to operate welding machines and troubleshoot equipment issues. Precision & Quality: Ability to work with tight tolerances and perform high-quality welds on various metals. Safety Compliance: Knowledge of welding safety protocols and PPE usage. Work Environment & Physical Requirements Ability to work in confined spaces and at heights as required. Must be able to lift up to 50 lbs. Exposure to welding fumes, heat, and various industrial work conditions. Requires standing, bending, and kneeling for extended periods. How to Apply Apply Online or contact us directly to learn more about this opportunity. Contact: Hutco, Inc. - Portsmouth Branch 📞 Phone: ************** 📧 Email: ************************ Hutco, Inc. is an Equal Opportunity Employer (EOE). #HUTCOSP

Venture Dynamics is looking for a Combination Pipe Fitter/Pipe Welder Job Requirements: Must have 6+ years of Pipe Welding, Structural Fabrication and Pipe Fitting experience. Applicant will be required to pass multiple welding qualification tests, primarily in the 6G position, open root. • GTAW, FCAW, and GMAW on various metals to include mild steel, stainless steel, and aluminum. • Experienced with fabricating both piping systems and structural hardware. • Experienced with various metal cutting processes to include Oxygen/Acetylene, Plasma, and Carbon Arc. • Candidate must be able to pass welding qualification test to retain employment. Responsibilities Include: • Fabrication of custom structures and piping systems to tight tolerances specified on engineered drawings. • Interpret blueprints and weld call outs to fabricate hardware within drawing specifications. • Operate equipment such as forklifts, overhead cranes, and oscillating man lifts. • Communicates well with others and develop customer relations. • Utilize Microsoft Office 365 for work package management (basic email, word, and excel). • Candidate must pass a government background check. • Valid VA Driver's license with good driving record to drive company vehicles. View all jobs at this company

Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: Atlantic Constructors is dedicated to providing its employees and their eligible family members with a wide range of benefits. From competitive benefits to on-site wellness programs, we provide resources to support you and your family's health, well-being and happiness. We have created a comprehensive benefits package that includes: * Medical Insurance Plans * Dental Insurance Plan * Vision Insurance Plan * 401(K) Retirement Plan with Generous Company Matching * Health Savings Plan Atlantic Constructors offers competitive benefits, for more information check out our comprehensive list on our website. Summary/Objective: Lay out, fabricate, assemble pipe in the field and fab shop; install and maintain industrial production and process piping and welding systems. Essential Functions: * Knows the properties of various rods and fluxes used in welding metals * Read and interpret sketches, blue prints, and isometric plans/drawings * Able to measure routings of pipe and fabricate pipe to fit existing in-line piping system; utilize instrumentation cut sheets to do take outs for fabrication of spool pieces * Plan and layout sequence of installation to avoid obstructions * Cut pipe using port-a-band saw, reciprocating saw, pipe cutters, power saw, cutting torch, and pipe cutting machine * Assemble, fabricate and install variety of metal pipe and pipe fittings for both carbon steel and stainless steel * Installation of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. * Secure pipe to structure with clamps, brackets, and hangers using hand tools * Remove slag and rough spots with a portable grinder, file or scraper as necessary * Determine required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques * Work within precise limits or standards of accuracy * Rely on instructions and pre-established guidelines to perform the functions of the job * Plan work and select proper tools * Work at heights without fear * Clean, bevel, prepare and install pipe with various fittings and weld joints * Perform layout, rigging and transportation of pipe, valves and fittings * Thread pipe using threading machine * Assemble and install a variety of metal or nonmetal pipe and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints and hand tools * May assist in lifting, positioning and securing of material and work pieces during installation * Respiratory protection is common and may be required * Responsible for observing and complying with all company, safety and project policies * Performs other duties as assigned Supervisory Responsibility: No Required: * 3+ years of experience with TIG and Stick pipe welding with various techniques including electric, gas, arc, or other equipment; or equivalent combination of vocational training and experience * Must pass ASME pipe welding test and background check * Knowledge of commonly-used concepts, practices and procedures * Knowledge of industrial mechanical systems * Field verify, routing, pipe systems prior to fabrication * Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills * Must be able to pass post-offer pre-employment drug screen, and may be required to satisfactorily complete additional background checks as required (i.e. DMV, criminal history) * Must adhere to all company policy and procedures * Must be available, and have the means to report to multiple job sites as assigned The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: * May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold and dampness * May be required to use hearing protection in and around areas with moderate/high exposure to high noise levels * May be required to use respiratory protection when working in areas with fumes, or airborne particles including dust * May be required to work in confined spaces or at heights Physical Demands: * This role routinely uses construction equipment such as heavy machinery, hand and power tools * While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs. * Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms * Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus Travel: * May require travel (typically not overnight) Preferred: * Prior military experience * HS diploma or GED equivalent Pipe Fitter Welder, Pipe Fitter Welder, Pipe Fitter Welder

JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: Prioritize safety and adhere to quality standards during all aluminum welding operations. Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding. Utilize personal basic tools and equipment for welding tasks if not provided by the workplace. Perform aluminum welding based on the required GTAW process and parameters. Strictly follow welding procedure specifications for GTAW aluminum welding. Prepare and set up welding cells for serial production runs of aluminum components. Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities. Adhere to all company policies and rules. Demonstrate keen attention to detail and focus on assigned tasks. Comply with safety regulations and maintain high-quality standards. Collaborate with team members to enhance productivity and efficiency. Assist in preparing aluminum products for shipment. Report any hazardous work conditions or practices to the supervisor. Capable of manually lifting raw materials, final products, and packed aluminum items for shipment, weighing up to 60 pounds or using a hoist. SUPERVISORY RESPONSIBILITY None KNOWLEDGE, SKILLS, AND ABILITIES Ability to understand and follow both verbal and written instructions. A willingness to learn and display a dependable work ethic. Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding. Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals. Familiarity with the metric system. Capable of standing continuously for extended periods. Willingness to work for 40+ hours per week. EDUCATION AND EXPERIENCE High school graduate or GED Six months to one-year of relevant experience and/or training in aluminum welding. Prior experience with aluminum GTAW welding is essential. WORKING CONDITIONS Work environment involves exposure to various weather conditions, work in confined spaces or heights, prolonged standing and physical exertion as well as frequent bending, stooping and reaching. Noise levels may be moderate to high and may work in close contact with other team members. EQUIPMENT USED Welding equipment and personal protective equipment. REASONABLE ACCOMMODATIONS May be made to enable qualified individuals with disabilities to perform essential job functions.

CTR Group is seeking several Marine and Industrial Painter's local to the Hampton, VA area. Immediate openings and urgently hiring! What We Offer: Weekly Pay – you receive a paycheck every week Comprehensive Benefits Package Safety First! Pay: $25 to $31 depending on experience RESPONSIBILITIES & REQUIREMENTS: Minimum of five years of commercial or naval experience as a first-class pipe welder. Proficient in SMAW, GTAW, and GMAW/MIG welding techniques. Ability to perform welding in challenging positions (6G/6GR) and environments. Experience with welding carbon steel, stainless steel, and copper-nickel pipe materials. Ability to use precision measuring tools such as fillet gauges, butt gauges, and scales to inspect welds. Ability to work well in a **team environment** and collaborate effectively with colleagues on complex projects. Strong commitment to safety practices and knowledge of OSHA regulations in the shipbuilding and industrial sectors. Perform multi-pass, all-position fillet and butt welds using **SMAW (Shielded Metal Arc Welding), GTAW (Gas Tungsten Arc Welding),** and **GMAW/MIG (Gas Metal Arc Welding) ** processes. Weld carbon steel, stainless steel, and copper-nickel pipes using SMAW and GTAW processes, including fusion inserts and open root welding. Execute mirror welds using SMAW and GTAW processes. Use an oxygen/propane heating torch for pre-heating materials as required. Work in physically demanding environments such as shipboard settings, sub-assemblies, ladders, and staging areas. Adhere to all OSHA safety regulations, particularly those relevant to shipbuilding and industrial environments. Utilize fillet gauges, butt gauges, and a six-inch scale to ensure accurate measurements and weld quality. About CTR Group: CTR Group operates in the staffing and recruitment industry, Nationwide for over 35 years. We provide full-service staffing support for various sectors including Marine Trades, Heavy Industrial, Light Industrial, Commercial, Technical, Professional, Aerospace and Aviation, and Energy. We offer a range of placement options such as Direct Hire, Contract Labor, Temporary & Temp to Hire. CTR Group takes pride in its high ratings across various platforms, reflecting our commitment to excellence and our dedication to providing quality staffing and employment services. CTR Group is an equal employment opportunity employer. Candidates are selected based on qualifications and defined requirements of the job, not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin or any other protected status. Further, CTR Group encourages United States' Veterans and persons with disabilities to apply for positions for which they are qualified.

JOURNEYPERSON 4 (Pipewelder) Have a working knowledge and understanding of welding standards, such as Tech-Pub-278, Tech-Pub-248, MIL-STD-1689 and proper joint designs IAW MIL-STD-22D. Have the ability to weld all types of materials, to tig and stick, weld plate, pipe including piping joints such as sockets, butts,E.B rings, backing rings and open butts. Have experience with various metals such as cuni, monel, stainless steel, alum and carbon steel/cromoly. Be able to set up and operate welding machines such as SYNCHROWAVE 250 and POWCON ST-300. Be able to trouble shoot problems with tig lines and machines. Be able to weld with the use of a mag-base mirror for tig and stick. Have the ability to utilize Metro PCP 912-04 for P-I piping. JOURNEYPERSON 3 (Pipewelder) Have knowledge of proper joint designs IAW MIL-STD-22D. Be able to weld different materials with stick and tig. Have the ability to weld pipe and plate including butts, sockets, and backing rings. Have experience with carbon steel/cromoly, cuni and stainless steel materials. Be able to operate with welding banks and some knowledge of the operation of welding machines such as SYNCHROWAVE 250 and POWCON ST-300. Be able to troubleshoot problems with tig lines and machines. JOURNEYPERSON 2 (Pipewelder) Have some knowledge of proper weld joint designs. Have the ability to stick weld and a willingness to learn tig. Have experience with various metals helpful but not mandatory. Ability to operate with welding banks. Pay: up tp $29.00/hour Per diem Available to those eligible

Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years. Benefits: Atlantic Constructors is dedicated to providing its employees and their eligible family members with a wide range of benefits. From competitive benefits to on-site wellness programs, we provide resources to support you and your family's health, well-being and happiness. We have created a comprehensive benefits package that includes: * Medical Insurance Plans * Dental Insurance Plan * Vision Insurance Plan * 401(K) Retirement Plan with Generous Company Matching * Health Savings Plan Atlantic Constructors offers competitive benefits, for more information check out our comprehensive list on our website. Summary/Objective: Lay out, fabricate, assemble pipe in the field and fab shop; install and maintain industrial production and process piping and welding systems. Essential Functions: * Knows the properties of various rods and fluxes used in welding metals * Read and interpret sketches, blue prints, and isometric plans/drawings * Able to measure routings of pipe and fabricate pipe to fit existing in-line piping system; utilize instrumentation cut sheets to do take outs for fabrication of spool pieces * Plan and layout sequence of installation to avoid obstructions * Cut pipe using port-a-band saw, reciprocating saw, pipe cutters, power saw, cutting torch, and pipe cutting machine * Assemble, fabricate and install variety of metal pipe and pipe fittings for both carbon steel and stainless steel * Installation of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications. * Secure pipe to structure with clamps, brackets, and hangers using hand tools * Remove slag and rough spots with a portable grinder, file or scraper as necessary * Determine required equipment and welding method, applying knowledge of metallurgy, geometry, and welding techniques * Work within precise limits or standards of accuracy * Rely on instructions and pre-established guidelines to perform the functions of the job * Plan work and select proper tools * Work at heights without fear * Clean, bevel, prepare and install pipe with various fittings and weld joints * Perform layout, rigging and transportation of pipe, valves and fittings * Thread pipe using threading machine * Assemble and install a variety of metal or nonmetal pipe and pipe fittings, using threaded caulked, soldering, brazen, fused, or cemented joints and hand tools * May assist in lifting, positioning and securing of material and work pieces during installation * Respiratory protection is common and may be required * Responsible for observing and complying with all company, safety and project policies * Performs other duties as assigned Supervisory Responsibility: No Required: * 3+ years of experience with TIG and Stick pipe welding with various techniques including electric, gas, arc, or other equipment; or equivalent combination of vocational training and experience * Must pass ASME pipe welding test and background check * Knowledge of commonly-used concepts, practices and procedures * Knowledge of industrial mechanical systems * Field verify, routing, pipe systems prior to fabrication * Must be able to multi-task, work with minimal supervision, follow written and oral instructions, show attention to detail, and demonstrate problem-solving skills * Must be able to pass post-offer pre-employment drug screen, and may be required to satisfactorily complete additional background checks as required (i.e. DMV, criminal history) * Must adhere to all company policy and procedures * Must be available, and have the means to report to multiple job sites as assigned The work environment and physical demands required would be representative of those that must be met by an employee to successfully perform the essential functions of this job, and may include, but are not limited to the following: Work Environment: * May work in varying temperatures; both inside and outside, including inclement weather, heat, humidity, cold and dampness * May be required to use hearing protection in and around areas with moderate/high exposure to high noise levels * May be required to use respiratory protection when working in areas with fumes, or airborne particles including dust * May be required to work in confined spaces or at heights Physical Demands: * This role routinely uses construction equipment such as heavy machinery, hand and power tools * While performing duties of the job the employee may work aloft, climb, bend, pull, reach overhead, stand/walk for long periods of time and lift up to 50 lbs. * Frequently is required to use hands to finger, handle or feel objects, tools or controls; and reach with hands and arms * Must be able to correctly identify all colors of a color-coded cable/wires and see close vision, distance vision, depth perception, peripheral vision and ability to adjust focus Travel: * May require travel (typically not overnight) Preferred: * Prior military experience * HS diploma or GED equivalent Pipe Fitter Welder, Pipe Fitter Welder, Pipe Fitter Welder