Industrial Pipefitter (Fusion, Welding, HVAC Equipment) (Traveling Position)
Welder Job 19 miles from Newtown
PowerSecure is seeking qualified candidates for exciting new projects throughout the US. Core competencies for the Mechanical Installer include the ability to complete HVAC installations including Piping Replacements, Equipment Installations including Chillers, Boilers, Air Handlers, Pumps, VAV Boxes etc. Our company provides a safety centric culture, great opportunities for upward growth, professional development, and competitive compensation packages.
Minimum Qualifications: (Education, Experience, Knowledge, and Skills):
+ High School, GED Equivalency, and/or Trade School
+ Valid Driver's license preferred
+ Minimum of 3 years in the pipefitting trade in the institutional, industrial or commercial HVAC sector.
+ Experience with various types of pipe and fitment techniques, including screw pipe, grooved, compression, fusion, glue, sweat, braze and weld, of various materials including steel, copper, plastic, fiberglass etc, with diameters ranging from ½" to 6" or greater.
+ Hands-on experience with demolition and installation of various types of commercial HVAC equipment and related processes.
+ Experience with Sheet metal ductwork fabrication and installation (not required, but a plus).
+ Experience with electrical and controls installation (not required, but a plus).
+ Must be able to pass a government background check, drug test and other site pre-access requirements.
+ Apprenticeship program (not required, but a plus).
+ OSHA 10 training (not required, but a plus).
+ Position requires a willingness to travel to project locations when assigned to work on projects that require onsite presence for extended project durations.
Job Duties and Responsibilities:
+ Collaborate with HVAC Foreperson and project team to ensure material and equipment needs are identified and scheduled prior to start of actual work.
+ Read and interpret construction drawings, project specifications, and equipment submittals.
+ Utilize construction plans to layout and install HVAC equipment and supports.
+ Lay-out, fabricate, install, repair, troubleshoot, and maintain piping systems, pipe supports, fixtures, and related domestic water, hydronic and pneumatic system. Systems will vary in complexity, size, and pressure rating.
+ Lay-out, fabricate, install, repair, troubleshoot, and maintain ductwork for ventilation applications. These systems will vary in complexity, size, and rating.
+ Must be able to work well with others and be able to take direction.
+ Train apprentices in work-related areas to enhance installation knowledge, productivity, and safety.
+ Strong organizational and planning skills; Able to effectively allocate and develop resources.
+ Reliable, self-motivated, and professional.
+ Maintain safe work environment by complying with safety policies and procedures.
Physical Demands and Work Environment:
Must be able to lift up to 50 pounds.
Must be physically capable of walking, stooping, crawling, climbing, kneeling, crouching, handling, reaching, depth perception, field of vision, balancing, hearing, and talking.
Workers can be subjected to possible bodily injury from pipe fitting equipment, tools, materials, etc. Work environment may include exposure to weather, extreme heat (including humidity) or cold, noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to radiation, exposure to toxic or caustic chemicals, proximity to moving mechanical parts, working at heights, and working around explosives.
About Us:
PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers.
Join Our Power Team! (https://cloud.3dissue.com/***********37/242401/HR-9-14-2020/index.html)
We invest in high-value and cost-effective benefits for our employees. Our benefits package includes:
+ Medical, dental, vision and life insurance coverage
+ Competitive pay and a matching 401 (k) plan
+ Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days)
+ Flexible spending accounts/Health savings account
+ Wellness Incentive Programs
+ Employee Referral Program
+ Tuition Reimbursement
PowerSecure is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. This position is not open to third party recruiters.
Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities
The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)
Welder 2nd Shift (3:00pm-11:00pm Mon-Fri)
Welder Job 8 miles from Newtown
Job Title: WelderDepartment: FabricationAccountability: This position reports to the Production Supervisor - Fabrication
Responsibilities: • Responsible for welding various metals: stainless steel, aluminum, carbon steel.• Welds and Fabricates custom parts using a variety of machines including but not limited to, Millermatic 250 Mig Welder, Syncrowave 350 LX Tig Welder• As workload requires, this position may involve other fabrication work in area's such but not limited to Fastener Insertion Press, Shear, Spot Weld Machine, Auto-weld machine, Milling machine, Deburring, and Sanding Equipment• Executes to work orders and engineering drawings• Receives verbal orders to fabricate custom designed parts and products• Receives written and verbal instruction on priority of orders• Receives, checks and handles raw material from inventory as needed• Sets up for daily work according to production schedule and/or verbal instructions• Checks parts, products and machinery for defects• Works at different workstations as job requires• Maintains a clean safe work area• Moves finished goods to other inventory or work areas• Assists with special projects as assigned by supervisor
Requirements:• High School Diploma or GED• Must supply own basic hand tools• Must be able to safely operate a forklift and other material handling equipment• Able to MIG and TIG weld up to ¼” steel and aluminum.• Ability to Read and Interpret Quality Documents and Drawings• Able to perform basic mathematical computations• Must regularly be able to lift and move from 50 to 100 lbs• Must be able to tolerate long periods of standing Work Environment - Manufacturing:• Chemicals, (See SDS)• Machinery• Dust• Paint• Noise• Protective Clothing and Equipment Required
Company Details:
Havis is the leading manufacturer of products designed for mobile workers. Our company has a legacy dating back over 75 years as a trusted manufacturer and provider of mission critical equipment with a focus on the customer. Our headquarters is located in Warminster, Pennsylvania with additional facilities in Ivyland, Pennsylvania, Plymouth, Michigan and a fourth location in Burnsville, MN. We design, engineer and build safe, reliable, ergonomically efficient products. We strive to exceed our own high standards and our customers' expectations with flexible, integrated solutions. We pride ourselves in providing the finest quality products and services to our customers. We are committed to continually improving our products, our services and ourselves.
Havis, Inc. - Website: *************
Havis designs, manufactures and sells equipment for the mobile workforce
Headquartered in Warminster, PA with additional facilities in Ivyland, PA and Plymouth, MI
ISO 9001 Certified Quality Management System
Fast growing company in a niche but growing marketplace
Company offers Health, Dental, Vision and 401(k) Plan with matching contributions
100% Employer Paid STD, LTD and Life & ADD benefits
Generous Paid Time Off and Holiday benefits
Competitive pay commensurate with education, skills, and experience
Prepared By: Human ResourcesApproved by: Production Manager
Tig Welder - 1st Shift
Welder Job 17 miles from Newtown
Seeking a 1st Shift Fabricator responsible for operating a variety of machines and tools to produce precision parts and assemblies. They may also fabricate and modify parts to make or repair equipment. Experience in sheet metal layout, bend allowances, brake, and shear are required. The ideal candidate will have a team driven attitude, outstanding work ethic, and the ability to work with little or no supervision while maintaining quality of work. As the Fabricator your responsibilities will be: Fabricate from blue prints and drawings Weld, fabricate, and repair machinery in plant as needed. Repair equipment as required in the plant. Install fabricated parts in plant as needed Maintain a clean and safe work area. Work in a manner that promotes safety. Help team reach all KPI goals. Work in a manner that embraces company core values.
This position requires that one be able to fabricate and weld parts as needed.
Skill Level:
Mastered all required skills for the job positions
Solid Stick and Tig Welding skills
Be able to set-up and run all cutting, forming, and welding equip. avail. in shop.
Must be able to read blueprints
Must be able to do layout work
Plant Safety:
Follows company rules, policies and procedures regarding safety.
Food Safety:
Follows company and USDA rules, policies and procedures are: food safety.
Position is 1ST Shift Monday - Friday -6:00 AM TO 3:00 PM
Welder-1st Shift
Welder Job 16 miles from Newtown
Job Details Corle Building Systems, Inc - Imler, PA Full Time $21.00 - $27.50 Hourly 1st Shift ManufacturingDescription
Corle Building Systems is an IAS accredited (USA) and CSA-A660 (Canada) certified manufacturer of pre-engineered steel building systems. We design and manufacture rigid frame clear span and multiple span buildings of all sizes.
Due to continued growth, Corle Building Systems is searching for Welders on 1st shift to join our team.
Welding candidates need to be proficient in MIG welding structural steel in the flat position, be able to read shop drawings, use an overhead crane, grinder and carbon arc. This role has a specific focus on developing and enhancing welding skills and knowledge of existing welding.
Prior welding experience required.
Benefits:
$1,500 Sign On Bonus
Perfect Attendance Bonus - $100/week
Competitive wages - pay based on experience
100% Company Paid Employee Medical Coverage
Family Medical Coverage options available
Vision, Dental, Supplemental Coverages
Paid vacation and holidays
401K Plan with up to 4% Company Match
Employee referral program
Welder/Fitter and Millwright - (Trenton, NJ)
Welder Job 10 miles from Newtown
Job details Job type Full-time Shift and schedule 8 hour shift Benefits Pulled from the full job description * 401(k) * Dental insurance * Health insurance * Life insurance * Paid time off * Professional development assistance * Referral program Show more Marshall Industrial Technologies:
We are a growing employee-owned multi location industrial service provider.
At Marshall Industrial Technologies we strive to provide superior welding, fabricating, mechanical maintenance, installation, HVAC and electrical needs throughout the Lehigh Valley and surrounding PA/NJ counties.
We are looking for experienced Piping/Millwright Foreman to expand our business.
With our broad range of experience, and over seven decades in the business, we are prepared to meet the capital project and plant maintenance needs of our customers and we can respond rapidly to any emergency installation and repair needs.
We provide a full line of services from one safe, reliable source to keep any operation up and running.
Our goal is to be the first call when there is a need for industrial work, as we strive to be the #1 single-source solution for equipment installation, machinery repair, electrical work, and plant maintenance needs.
With a strong focus on safety and quality processes, we deliver solid results for new construction, expansion, maintenance and capital development and we excel in sanitary and highly regulated industries including pharmaceutical, chemical, flavors & fragrances, food & beverage, as well as most heavy industries.
Pipefitter/Mechanical/Millwright Foreman
We are currently seeking experienced, safety minded, supervisor to oversee industrial mechanical and piping installation projects on our customer sites.
Responsibilities and Duties
Purpose: Monitor the quality, safety, and provide planning and direction directly to the assigned crew of craftsmen for activities for projects.
Work Schedule: Varies by location. Must have open availability any time any day of the week. Travel required at times.
Essential Skills: (may include but are not limited to the ability to)
* Plan, coordinate and/or supervise construction activities of craft employees
* Thoroughly review scope documents, drawings, and specifications.
* Study project execution and tracking documents including the project execution plan, project safety plan, QA/QC plan, schedule, manpower loading projections, equipment rental schedule, installed quantity and labor tracking plan, and subcontracting strategy.
* Ensure project is constructed in accordance with design, budget and schedule.
* Interface with Management to ensure all company, client, and project policies and procedures are adhered to.
* Interface with all project team members as required in the establishment of project schedules and resolving schedule problems.
* Provide leadership and management for craftsmen, ensuring to organize and lay out work for crews.
* Ensure that materials, drawings, manpower, specifications, tools, consumables, and equipment are available when needed.
* Utilize appropriate computer software for project planning, execution and tracking
* Provide prioritized work activity instructions to all crews and monitor their progress.
* Assist with the implementation/interpretation of safety programs.
* Responsibilities include verification of maintaining associated codes as required per project.
* Maintain strict adherence to the company's and regulatory policies.
* Mentor craft personnel for professional development.
* Work within precise limits and standards of accuracy.
* Follow oral and written directions.
* Must have valid driver's license
We offer
* Competitive Salary
* 401k
* Attractive benefit plan including medical, dental, life insurance
* Performance incentives
* Employee stock ownership
Requirements:
* High school or equivalent
* 5+ years Foreman experience
* Must complete pre-employment physical exam and drug screen.
Marshall provides equal employment opportunities to all employees and applicants and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity, etc.
Job Type: Full-time
Benefits:
* Dental insurance
* Health insurance
* Life insurance
* Paid time off
* Professional development assistance
* Referral program
* Vision insurance
Schedule:
* 8 hour shift
Experience:
* Industrial construction: 5 years (Preferred)
* Welding: 5 years (Preferred)
Work Location: On the road
If you require alternative methods of application or screening, you must approach the employer directly to request this as Indeed is not responsible for the employer's application process.
Pipe Welder
Welder Job 19 miles from Newtown
Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. Pay rate is up to $26 + $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills.
Must comprehend written and verbal instructions (in English).
Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings.
Must pass a background check, vision test and drug test.
Must be able to work any shift and overtime.
Welding Instructor
Welder Job 9 miles from Newtown
It's great to work at a place where people are truly committed to serving our students! We're committed to bringing passion and energy to our College.
Visit our Life Page on LinkedIn to explore our dynamic campus culture, hear from current employees, and discover what makes Bucks County Community College a great place to work!
Welding Instructor - Evening Program
Bucks County Community College is seeking experienced welding professionals to join our team as part-time evening instructors in our growing industrial skills program. These contract-based positions offer flexible schedules and the opportunity to train adult learners in a state-of-the-art facility.
Responsibilities:
Teach and mentor students in various welding processes and techniques, ensuring safety and industry standards.
Develop lesson plans, track attendance, and assess student progress.
Maintain equipment and identify necessary supplies for instruction.
Foster teamwork, professionalism, and workplace communication skills.
Course Structure:
Evening classes, typically two nights per week for 16-week cycles.
Hands-on training and theory instruction in a lab/shop setting.
Held at the Center for Advanced Technologies in Bristol, PA.
Minimum Qualifications:
High school diploma with 5+ years of welding experience or an associate degree.
10+ years in construction, industrial, or manufacturing environments.
Expertise in Stick, MIG, TIG, Flux Core, and Oxy-Acetylene welding.
Strong knowledge of welding safety, blueprint reading, and welding-related math.
Proficiency in MS Office for email and recordkeeping.
Preferred Qualifications:
Prior experience teaching adult learners.
Join us in shaping the next generation of skilled welders in a dynamic and supportive learning environment!
We are proud to be an organization that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another's thinking and approach problems collectively. We are an equal opportunity employer, committed to fostering an inclusive and diverse workplace.
Please Note: At this time, the College does not provide work visa sponsorships. To be considered for employment at Bucks County Community College, applicants must be permitted to legally work in the United States without employer sponsorship.
Bucks County Community College participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S.
Tank Builder / Welder (Nationwide)
Welder Job 19 miles from Newtown
Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities.
We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout
our beautiful country!
Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available.
Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums.
Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week).
Status: Full-time employee (subject to project availability and work schedules.)
NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures.
Day to Day Duties:
Performing arc and torch cutting and gouging.
Using generators, compressors, tuggers, blowers, grinders, and other power and air tools.
Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor).
Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment.
Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment.
Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations.
Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment.
Operating forklifts, man lifts, boom lifts, and other large lifting equipment.
Knowledge of crane operations (including rigging and signaling)
Reading detailed erection and fabrication drawings.
Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks.
Completing job safety analysis, safety audits, site-specific training, and other safety training.
Follow directions and work professionally with other crew members.
Other duties as assigned.
Welder
Welder Job 25 miles from Newtown
Work Schedule: Monday - Thursday 5 AM to 3:30 PM
This is an entry level position where the Welder I is introduced to the prefabrication of exterior and interior wall panels for commercial buildings. Additionally, the Welder I receives training on various welding and assembling techniques as it pertains to wall panel production and installation. Approval for all work is required prior to the Welder I completing any tasks.
Essential (Core Competencies) Duties
Read and interpret shop drawings.
Gather and collect materials.
Accurately measure and cut miscellaneous materials.
Perform panel layout in accordance with drawings.
Pre-assemble panel components in preparation for weld.
Perform welds to ensure panel stays secured.
Assist in securing completed wall assembly onto crane, lift off jigs and move to the next operation.
Attends and/or completes welder and safety training (through KLOVER Learning Management System) as required by management.
Marginal Functions
Perform sheathing of welded panels.
Other duties as assigned.
Qualifications / Required Education and Experience
High school diploma or GED.
1 year of experience with MIG welding (can be a combination of pre or post-secondary vocational education in welding and work experience).
Ability and willingness to gain proper welding certifications within two years of employment.
Preferred Education and Experience:
1+ year MIG welding experience (can be a combination of pre or post-secondary vocational education in welding and work experience).
Experience in a manufacturing environment.
Trade school/vocational education in construction/carpentry and/or commercial carpentry experience.
Key Competencies
The ability to achieve thoroughness and accuracy when accomplishing a task through concern for all areas involved.
The need to be self-motivated to grow personally and professionally through on-going education as a result of the rate of change in the position.
The ability to successfully adapt (personally & professionally) to changes in the internal and external environment.
The ability to focus on and meet target goals and objectives.
The ability to evaluate, select and act on various methods and strategies for solving problems and meeting objectives before being asked or required to do so.
Ability to build a relationship and effectively communicate with coworkers and customers (inclusive of active listening skills, communicating non-defensively and having a positive “can-do” attitude.)
The ability to willingly cooperate and work collaboratively toward solutions that generally benefit all involved parties and accomplish group objectives.
Work Environment
The work environment will consist mainly of heavy work in a manufacturing environment. There may be some exposure to seasonal humidity and extreme heat over 85 degrees, excessive noise, and some vibration associated with the use of tools and equipment. Some hazards such as proximity to moving mechanical parts, electrical current, caustic chemical, and slippery and uneven walking surfaces exist.
Company Standards
The employee will adhere to the company's safety policy and, at all times, will use all required Personal Protective Equipment provided to employee.
The employee will represent the Company in a positive, professional manner with fellow employees and within the communities served.
The employee will encourage and maintain teamwork throughout the company and will communicate all pertinent information in a timely and effective manner.
The employee will endeavor to maintain our integrity by embracing high ethical standards and adhering to company policies.
Consistently demonstrates Company's Guiding Values of Quality, Customer Satisfaction, Integrity, Teamwork, and Community.
Klover Prefab is an EEO employer - M/F/Vets/Disabled View all jobs at this company
Welder
Welder Job 25 miles from Newtown
Work Schedule: Monday - Thursday 5 AM to 3:30 PM This is an entry level position where the Welder I is introduced to the prefabrication of exterior and interior wall panels for commercial buildings. Additionally, the Welder I receives training on various welding and assembling techniques as it pertains to wall panel production and installation. Approval for all work is required prior to the Welder I completing any tasks.
Essential (Core Competencies) Duties
Read and interpret shop drawings.
Gather and collect materials.
Accurately measure and cut miscellaneous materials.
Perform panel layout in accordance with drawings.
Pre-assemble panel components in preparation for weld.
Perform welds to ensure panel stays secured.
Assist in securing completed wall assembly onto crane, lift off jigs and move to the next operation.
Attends and/or completes welder and safety training (through KLOVER Learning Management System) as required by management.
Marginal Functions
Perform sheathing of welded panels.
Other duties as assigned.
Qualifications / Required Education and Experience
High school diploma or GED.
1 year of experience with MIG welding (can be a combination of pre or post-secondary vocational education in welding and work experience).
Ability and willingness to gain proper welding certifications within two years of employment.
Preferred Education and Experience:
1+ year MIG welding experience (can be a combination of pre or post-secondary vocational education in welding and work experience).
Experience in a manufacturing environment.
Trade school/vocational education in construction/carpentry and/or commercial carpentry experience.
Key Competencies
The ability to achieve thoroughness and accuracy when accomplishing a task through concern for all areas involved.
The need to be self-motivated to grow personally and professionally through on-going education as a result of the rate of change in the position.
The ability to successfully adapt (personally & professionally) to changes in the internal and external environment.
The ability to focus on and meet target goals and objectives.
The ability to evaluate, select and act on various methods and strategies for solving problems and meeting objectives before being asked or required to do so.
Ability to build a relationship and effectively communicate with coworkers and customers (inclusive of active listening skills, communicating non-defensively and having a positive "can-do" attitude.)
The ability to willingly cooperate and work collaboratively toward solutions that generally benefit all involved parties and accomplish group objectives.
Work Environment
The work environment will consist mainly of heavy work in a manufacturing environment. There may be some exposure to seasonal humidity and extreme heat over 85 degrees, excessive noise, and some vibration associated with the use of tools and equipment. Some hazards such as proximity to moving mechanical parts, electrical current, caustic chemical, and slippery and uneven walking surfaces exist.
Company Standards
The employee will adhere to the company's safety policy and, at all times, will use all required Personal Protective Equipment provided to employee.
The employee will represent the Company in a positive, professional manner with fellow employees and within the communities served.
The employee will encourage and maintain teamwork throughout the company and will communicate all pertinent information in a timely and effective manner.
The employee will endeavor to maintain our integrity by embracing high ethical standards and adhering to company policies.
Consistently demonstrates Company's Guiding Values of Quality, Customer Satisfaction, Integrity, Teamwork, and Community.
Mig Welder
Welder Job 17 miles from Newtown
MIG Welder - Immediate Opportunity! Riverton, NJ area $20.00 - $23.00 Hourly Welcome to Trotter Workforce, where we redefine possibilities in the world of employment. As a dynamic and innovative recruiting firm, we take pride in offering diverse career opportunities across a multitude of industries.
Full Time Position
Weekly pay
Benefits
Responsibilities:
Perform MIG welding on various metal components and structures
Operate welding equipment and tools such as stick welders, plasma cutters, and hand tools
Read and interpret blueprints, schematics, and welding symbols
Ensure welds meet quality standards and specifications
Conduct inspections and perform necessary repairs or adjustments
Collaborate with team members to complete projects efficiently and effectively
Requirements
Proven experience as a MIG Welder or similar role
Proficient in MIG welding techniques and processes
Knowledge of other welding techniques such as stick welding is a plus
Familiarity with duct-work, pipe threading, and soldering
Ability to read and interpret blueprints, schematics, and welding symbols
Basic math skills for measurements and calculations
Strong attention to detail and quality craftsmanship
Ability to operate a crane for lifting heavy materials (if applicable)
Physical stamina to stand for long periods of time and lift heavy objects
BenefitsAt Trotter, we're not just filling positions; we're crafting teams that span the full spectrum of expertise. Whether you're an experienced professional or just starting your career journey, Trotter Workforce provides a collaborative environment for you to thrive.
Join us as we shape the future of work, where the opportunities are as diverse as our workforce. Your potential has a place here at Trotter Workforce, where every role contributes to our collective success.
Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.
Post-Secondary Welding Instructor
Welder Job 10 miles from Newtown
Minimum of 3 years experience in the field;
Demonstrated knowledge of subject specialty and effective teaching methods;
Ability to maintain a positive learning environment;
Strong interpersonal and communication skills;
Ability to connect real world experience to the classroom and apply new code;
Required proof of U.S. citizenship or legal resident alien status
REPORTS TO: Director of Post-Secondary Services
SALARY: Hourly, as per the BOE approved MCTS Salary/Wage Guide for Hourly and Per Diem Employees
TERMS OF EMPLOYMENT: Part-time, as needed, as per the Adult Evening School calendar
The Mercer County Technical School District guarantees equal employment opportunities to all, regardless of race, color, age, creed, gender identity or expression, affectional or sexual orientation, ancestry, national origin, marital status, disability, nationality or sex.
AA/EEO
Please Apply Online at ************
Fitter/Fabricator
Welder Job 19 miles from Newtown
We are seeking an experienced Advanced Fabricator with a minimum of four years of industrial or commercial structural stick welding. The ideal candidate will possess strong skills in single pass tack welding, burning, and heating with oxygen/propane torches, and the ability to understand complex structural assembly drawings, blueprints, and sketches.
**Responsibilities**
+ Perform Multi pass stick weld test
+ Utilize Oxygen/Propane Burning Torch for cutting and shaping materials.
+ Use Oxygen/Propane Heating Torch for material preparation.
+ Read and comprehend complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines.
+ Measure and comprehend fractional dimensions using a ruler.
+ Lay off piece parts for fabrication and assembly.
+ Assemble structural piece parts according to specifications with quality in mind.
+ Work in a physically demanding environment such as shipbuilding or steel fabrication.
+ Adhere to OSHA regulations relevant to the shipbuilding industry.
+ Operate vibratory tools including grinders and needle gun
**Pay and Benefits**
The pay range for this position is $45.00 - $45.00/hr.
Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following:
- Medical, dental & vision
- Critical Illness, Accident, and Hospital
- 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available
- Life Insurance (Voluntary Life & AD&D for the employee and dependents)
- Short and long-term disability
- Health Spending Account (HSA)
- Transportation benefits
- Employee Assistance Program
- Time Off/Leave (PTO, Vacation or Sick Leave)
**Workplace Type**
This is a fully onsite position in Philadelphia,PA.
**Application Deadline**
This position is anticipated to close on Apr 11, 2025.
**About Aerotek:**
We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow.
Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Welder Fabricator
Welder Job 25 miles from Newtown
Heritage Fence Company is looking for an Welder Fabricator to join our growing team! This role is a great opportunity for a detail-orientated individual with experience in the construction industry. We are celebrating 53 years in the Fencing industry and are focused on customer satisfaction, quality craftsmanship and employee engagement and retention.
We pride ourselves on being a “We” Company that takes the safety of our employees very seriously.
We service the Residential, Commercial, and Industrial markets in eastern PA, MD, DE, VA, NJ, NY with a focus on all types of Fencing (Wood, PVC, Aluminum, Chain Link, Steel, Temporary, etc) Railings, Wooden & Steel Guide Rails, Dumpster Enclosures, Anti-Climb, Temporary Pedestrian Barriers, Jersey Barriers (PVC & Concrete), Gate Operators, Access Control and much more!
Responsibilities:
Willingness to Travel (Occasional travel due to job location)
Work in both our shop and on job sites as a welder, mechanic or by assisting others
Manage fab shop equipment and metal fabrication
Consistently evaluate processes, recommend changes when appropriate
Meet with decision makers to discuss project options and take measurements
Daily communication with Operations to ensure smooth installation of projects
Work independently when required
Help manage operating expenses by allocating materials for minimal waste, facilitating clean transitions from one job to the next
Plan, implement and manage tasks in accordance with priorities and adhere to relevant safety regulations and requirements
Peacefully resolve any problems or issues that may arise
Requirements and Skills:
Minimum 5-7 years' experience
Reliable transportation to/from the office
Valid Driver's License
US Citizenship or Working Visa
Ability to lift 80lbs
Ability to pass new hire and random drug test
Ability to work full time M - F, 7am - 5pm (flex schedule available) & occasional Saturday mornings
Detail oriented and experienced in Stick, TIG & MIG welding
Ability to read and interpret Blueprints and layout materials
Good math skills
Strong interpersonal and communication skills
Critical-thinking and problem-solving skills
Strong organizational skills, time management skills, multi-tasking skills
Positive attitude
Quality and safety focused
Benefits Offered:
Competitive Wages DOE
Company Vehicles
(6) Paid Holidays
Paid Vacation Days
Medical, Dental & Vision Insurance
Uniforms
401K/Profit Sharing
Employee Appreciation/Outings such as Phillies games, golfing, bowling, BBQ's, Gift Cards
Call ************ or visit us at 3890 Skippack Pike, Skippack, PA 19474
Resumes can be emailed to *********************
Tig Welder I-III
Welder Job 12 miles from Newtown
STRONGARM Designs provides the ideal HMI solution to the healthcare, bio-pharmaceutical, food, and other industries. We are diligently seeking to hire a candidate for TIG Welder Level III, responsible for TIG/GTAW welding formed sheet metal and cast metal components. This position provides welded metal components which are used to support and fabricate our entire line of products including CleanMount, Vertica, Mobile Stations, and Suite-Stations.
Join a team and company with endless innovative visions in a rapidly growing, leading industry!
JOB DESCRIPTION:
Operate a TIG welding machine to join metal together based on provided engineering print. Fit, tack, and weld metal which include various sizes and shapes from either the press brake, laser cutter, or cast parts. Welding includes components with both square and curved surfaces. Maintain and ensure quality and aesthetic standards for custom, made to order HMI systems.
REQUIREMENTS:
Prior experience TIG welding thin gauge stainless steel, mild steel, and aluminum a must (typically 14-gauge 304 stainless steel and 14-guage CRS).
Experience reading engineering prints and welding symbols a must.
Able to use and read various measuring devices such as calipers and protractors.
Knowledge of the different types of metal used at STRONGARM (stainless steel, CRS, and aluminum)
Knowledge of sheet metal gauges.
Prior knowledge and ability to weld all typical types of joints (including butt joints, lap joints, corner joints, tree joints, and edge joints)
Able to stand, bend, lift, and/or walk for 2+ hours at a time.
RESPONSIBILITIES:
Join metal together using a TIG welding machine including both square and curved surfaces.
Perform measurements/inspection to ensure conformance to work orders and engineering print specifications such as flatness, parallelism, and dimensional tolerances.
Fill non-conforming materials reports for incoming materials that are out of spec or defective.
Ensure quality and aesthetic standards are maintained.
Clock in and out of work order travelers using the VISUAL bar code system.
Follow the daily production schedule.
Perform within the parameters of STRONGARM's policies and procedures.
BENEFITS CRAFTED FOR YOU:
Competitive compensation based on experience and certification
PTO (including sick and personal days)
401K, Health insurance, vision, dental
STRONGARM swag
Biyearly bonuses & yearly raises based on performance reviews
25 ₵ coke machine
STRONGARM Designs is looking for high-energy, mechanically inclined individuals with a positive attitude and willingness to learn. We at STRONGARM are committed to continuous improvement and seek driven candidates who wish to grow and develop professionally
.
Welder
Welder Job 22 miles from Newtown
MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients.
Job Description
Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Qualifications
· Demonstrated experience as a professional welder.
· Ability to strictly adhere to all safety standards.
· Demonstrated ability to accept and follow instructions from others.
· Willingness and ability to work cooperatively with others.
· Strong knowledge of welding equipment, materials, etc..
· Must successfully complete pre-access drug and alcohol testing.
· Must have a valid driver's license.
Additional Information
· Weld components in flat, vertical, or overhead positions.
· Operate safety equipment and use safe work habits.
· Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
· Measure dimensions of completed products or workpieces to verify conformance to specifications.
· Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
· Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys.
· Select production equipment according to product specifications.
· Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
· Monitor equipment operation to ensure that products are not flawed.
· Review blueprints or other instructions to determine operational methods or sequences.
· Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
· Clean workpieces or finished products.
· Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
· May perform other related duties as assigned.
Must have, or be able to obtain, OSHA 10 certification.
Journeyman Welder WF2 Philadelphia, PA
Welder Job 19 miles from Newtown
Job Details Philadelphia, PADescription
Fritz Staffing Group is currently hiring for Welders for a project we have in Philadelphia, PA. The job is slated 4-8 weeks, you will be working 40-50 hours a week, per diem will be $110.00/day 7 days a week as long as you work your required hours and days. Pay will be discussed during interview process.
Job Scope:
Our customer is installing a Automated Car Parking System, so you will need to have experience in millwright, rigging, and if possible welding. You will be installing and fabricating all metal and machinery as well. All power tools and supplies will be supplied by the customer.
Qualifications
Job Requirements:
OSHA 10
Drug Test
LOTO, Fall Protection, Rigging, and Motorized Platform Certifications
Experience in rigging
5+ years in millwright work
Safety PPE
Safety Toe Shoes
Long Pants
Hi-Vis
Hand Tools
Welder-2nd Shift
Welder Job 16 miles from Newtown
Job Details Corle Building Systems, Inc - Imler, PA Full Time $21.00 - $27.50 Hourly 2nd Shift ManufacturingDescription
Corle Building Systems is an IAS accredited (USA) and CSA-A660 (Canada) certified manufacturer of pre-engineered steel building systems. We design and manufacture rigid frame clear span and multiple span buildings of all sizes.
Due to continued growth, Corle Building Systems is searching for Welders on 2nd shift to join our team.
Welding candidates need to be proficient in MIG welding structural steel in the flat position, be able to read shop drawings, use an overhead crane, grinder and carbon arc. This role has a specific focus on developing and enhancing welding skills and knowledge of existing welding.
Prior welding experience required.
Benefits:
$1,500 Sign On Bonus
Perfect Attendance Bonus - $100/week
2nd Shift Differential - $1.00/hour
Competitive wages - pay based on experience
100% Company Paid Employee Medical Coverage
Family Medical Coverage options available
Vision, Dental, Supplemental Coverages
Paid vacation and holidays
401K Plan with up to 4% Company Match
Employee referral program
Welder II - C Shift
Welder Job 25 miles from Newtown
Purpose Statement: This position exists to produce welds that support the prefabrication of exterior and interior wall panels for commercial buildings.
Essential Functions:
•Read and interpret shop drawings.
•Gather and collect materials.
•Determine the appropriate welding equipment or method based on specifications and shop drawings.
•Accurately measure and cut miscellaneous materials.
•Perform panel layout in accordance with drawings.
•Pre-assemble panel components in preparation for weld.
•Perform welds to ensure panel stays secured.
•Weld components using manual or semi-automatic welding equipment in various positions (vertical,horizontal or overhead)
•Attends welder and safety training as required by management.
Marginal Functions
•Maintains welding maintenance logs for welder certifications to remain current.
•Perform sheathing of welded panels.
•Other duties as assigned.
Required Education and Experience:
•High school diploma or GED.
•4+ years welding experience (or a combination of pre or post-secondary education in welding and workexperience).
•Current AWS D1.1 GMAW and/or SMAW certifications.
Preferred Education and Experience:
•5+ years MIG welding experience (or a combination of pre or post-secondary education in welding andwork experience).
•Experience in a manufacturing environment.
•Trade school/vocational education in construction/carpentry and/or general carpentry experience.
Key Competencies:
•The ability to achieve thoroughness and accuracy when accomplishing a task through concern for allareas involved.
•The need to be self-motivated to grow personally and professionally through on-going education as aresult of the rate of change in the position.
•The ability to successfully adapt (personally & professionally) to changes in the internal and externalenvironment.
•The ability to focus on and meet target goals and objectives.
•The ability to evaluate, select and act on various methods and strategies for solving problems andmeeting objectives before being asked or required to do so.
•The ability to balance multiple priorities simultaneously.
•The ability to willingly cooperate and work collaboratively toward solutions that generally benefit allinvolved parties and accomplish group objectives.
Work Environment:
The work environment will consist mainly of heavy work in a manufacturing environment. There may be some exposure to seasonal humidity and extreme heat over 85 degrees, excessive noise, and some vibration associated with the use of tools and equipment. Some hazards such as proximity to moving mechanical parts, electrical current, caustic chemical, and slippery and uneven walking surfaces exist.
Physical Demands:
Must be able to do all of the following occasionally (up to 2.5 hours)
•Balancing
•Fine manipulation (pinching)
•Operates hand controls
•Operates Powered Equipment: Forklift, Skid Mover, etc.
Must be able to do all of the following frequently (2.5 - 5.5 hours)
•Pushing/Pulling
•Gross Manipulation
•Simple/Firm Grasping
•Carry up to 50 pounds
•Lift/Lower up to 50 pounds
Must be able to do all of the following continuously (5.5 hours or more)
•Reach below/at/above shoulder
•Squatting/Stooping/Crouching
•Walking
•Standing
•Repetitive Hand/Wrist Activities
•Talking
•Hearing
•Seeing with depth perception
•Seeing in the field of vision
Travel: Negligible
Schedule: This position will call for work done during the hours of 5 PM and 3:30 AM, Monday through Thursday, with mandatory overtime, as needed.
Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee of this job. Duties, responsibilities and activities may change at any time, with or without notice.
Welder
Welder Job 22 miles from Newtown
MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients.
Job Description
Position summary:
use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.
Qualifications
·
Demonstrated experience as a professional welder.
·
Ability to strictly adhere to all safety standards.
·
Demonstrated ability to accept and follow instructions from others.
·
Willingness and ability to work cooperatively with others.
·
Strong knowledge of welding equipment, materials, etc..
·
Must successfully complete pre-access drug and alcohol testing.
·
Must have a valid driver's license.
Additional Information
·
Weld components in flat, vertical, or overhead positions.
·
Operate safety equipment and use safe work habits.
·
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
·
Measure dimensions of completed products or workpieces to verify conformance to specifications
.
·
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
·
Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys
.
·
Select production equipment according to product specifications.
·
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
·
Monitor equipment operation to ensure that products are not flawed.
·
Review blueprints or other instructions to determine operational methods or sequences.
·
Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
·
Clean workpieces or finished products.
·
Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
·
May perform other related duties as assigned.
Must have, or be able to obtain, OSHA 10 certification.