Welder Jobs in Midland, MI

Joining the Metallus, formerly known as TimkenSteel, team means becoming part of a legacy that dates back over a century. We are an industry leader, manufacturing the cleanest steel in the world for companies in the industrial, aerospace and defense, automotive, and energy markets. This is a position for a four-year Mechanical Maintainer/Certified Welder Apprenticeship, with the potential to continued employment as a Mechanical Maintainer/Certified Welder after the apprenticeship is completed. This entry level maintenance/welding position will be assigned to one of our three Steel facilities in Stark County, Ohio (Gambrinus, Harrison or Faircrest Steel plants). Employees in this position are responsible for performing a variety of maintenance/welding and educational tasks including, but not limited to, classroom study, on the job training, and assisting journeymen in completion of mechanical maintenance and welding tasks. Employees in this position are responsible for but not limited to the following: * Be a motivated team member responsible for miscellaneous welding, mechanical, pipefitting, construction, maintenance and repair duties within a world-class manufacturing facility. * Receive and interpret instructions and prints regarding varying work assignments, both scheduled and emergency. * Analyze and interpret drawings and sketches, as well as plan and determine working procedure, and tools and equipment needed to complete the assignment. * Perform all types of welding, brazing, and cutting on any type of metal. * Perform work in accordance with Metallus practices and ASME code. * Plan layout, construct, install, repair, and maintain all types of pipeline, fitting and fixtures required in plant construction and maintenance. * Perform basic carpentry and sheet metal work. * Troubleshoot on any type of production, auxiliary, or service equipment. * Operate radio-controlled crane and mobile equipment to lift and transport materials, tools, and equipment. * Assist maintenance personnel in making repairs and performing their duties. * Dismantle, clean, inspect, rebuild, repair, replace, install, assemble, adjust, align, lubricate equipment. * Works in shop or plant as required. * Demonstrate the ability to problem solve. * Perform miscellaneous work such as lubricate machines and equipment, erect rigging for movement or lifting of heavy parts, fill out in time reports and work tickets, and keep equipment and work area clean and orderly for safe and efficient asset management. Minimum requirements include: * The ability to troubleshoot mechanical problems in the plant and take corrective action. * Basic understanding of welding and mechanical systems. * The ability to learn quickly, follow instructions and work safely with minimal direction. * Must possess the ability to work effectively with others (giving and receiving direction) and work independently and unsupervised as required. * High School diploma or GED with one year experience in welding and/or mechanical maintenance or current Metallus manufacturing production employee in good standing. * Candidate must be able to obtain 6G certification within the first 120 working days. Preferred experience includes: * Currently possess 6G certification. * Familiarity with prints, drawings and sketches. * Familiarity with Mechanical and Hydraulic drawings or schematics * Knowledge of rigging techniques. * Welding, pipefitting and Iron work. * Candidate has a current and valid driver's license Physical Requirements: * Ability to work at heights of 50 feet up to 100 feet * Ability to work in confined spaces * Ability to lift 75 pounds at one time, multiple times weekly * Ability to operate cranes, trucks or motor vehicles * Ability to work in extreme temperatures All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

Cardinal Staffing is seeking qualified ARC/STICK WELDERS for a facility in Belleville, MI. 1st shift = 5AM - 3PM (10 hour shift) Monday - Thursday OR Tuesday - Friday (Must be flexible to work either shift). Some overtime may be required if production needs increase. $18.00/hr Cardinal Staffing is invested in their team members! All temporary employees are offered competitive compensation as well as a benefits package including health insurance (medical, dental and vision). The purpose of this job is to produce quality, consistent welds while remaining in compliance with all safety protocols at all times. Essential Functions of Job:As a stick welder, you must select the right type of weld for the job and produce structurally sound, clean welds. You may use traditional arc welding, shielded metal arc welding (SMAW), manual metal arc welding (MMA or MMAW), or flux core, or double shielded, arc welding (FCAW) techniques, depending on the application. Skills required to carry out the essential functions include the ability to: Understand and follow directions and rules Safely and effectively operate various machinery and equipment Produce (quality and quantity) parts that meet specifications and expected output levels Visually identify and correct deficiencies in parts produced Interact appropriately and collaborate with fellow employees and management Communicate effectively (written and oral) with other employees and management Demonstrate continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively and jointly to provide quality customer service Work efficiently in a fast paced manufacturing environment with the flexibility to prioritize duties and multi-task at different levels Excellent work history and attendance is a MUST! Physical requirements which are part of the essential functions:Standing, sitting, moving, climbing, lifting up to 50 lbs, push/pull up to 50 lbs, bending, stooping hearing or equivalent, sight-visual acuity.Manual dexterity required for operating machinery and computers including fine, highly controlled muscular movements to adjust the position of a control mechanism; skillful, controlled manipulations of small objects; coordinating the movement of more than one limb simultaneously and bending or stooping repeatedly or continually over time. Mental requirements which are part of the essential functions:The ability to read and understand work instruction plans, diagrams and specifications.Effectively communicate and interact with others. Educational and or prior experience requirements include:High school diploma or equivalent and 2 years relevant experience. The ability to read and understand work instruction plans, diagrams and specifications. THIS DESCRIPTION MAY NOT CONTAIN A FULL LISTING OF THE ESSENTIAL FUNCTIONS TO BE PERFORMED IN THIS POSITION OR THE ASSOCIATED SKILLS. THIS JOB DESCRIPTION IS NOT AN EMPLOYMENT CONTRACT. THE JOB DESCRIBED IS AN AT-WILL POSITION. About Cardinal Staffing Services:Cardinal Staffing Services has over 25 years of experience being recognized as leaders in the staffing industry. Founded in Port Clinton, Ohio in 1994, we have grown and expanded into 5 states with 11 offices, delivering custom staffing and recruiting solutions to diverse markets. We leverage technologies, tools, and human connections to create the perfect employers and employees. We are also staffing for the following openings in your area:Maintenance Mechanic, MIG/TIG Welder, General Labor and more. APPLY TODAY! #IND1

GrayWolf is seeking Tank Welders at our Escanaba, MI project site GrayWolf is a heavy industrial/commercial construction contractor that provides end-to-end solutions from design, fabrication, construction, and facility management with a footprint that is nationwide. With more than 45-years of experience in the industry, we have strong leadership and support teams who understand field servant leadership is the key to our success. We are continually BUILDING new talent while developing our current talent. As our assignments vary in duration and locations, we provide a safe and ethical environment and offer a competitive wage and benefit program. We strive to be the best contractor with demonstrating a culture of Safety, Quality and Performance to deliver the best completed projects to our customers. Summary: The Tank Welder is responsible for performing welding and grinding functions per job specifications. Selects equipment and plans layout and assembly of welding. Works closely and interacts with supervision. Works with precise limits and standards of accuracy. Essential Duties: Assembles and fits to drawing dimensions of all kinds of structural, plate and mechanical materials into all types of assemblies. Efficiently produce quality welds and performs fitter tasks using various positions and metallurgy. Perform or assist with fit‐up and preparation of welds. Perform or assist with post weld cleanup, inspection, and repair. Communicate regularly with the Field Foreman with regard to issues and concerns. Perform all other job-related duties as requested by supervision. Qualifications: Must have at least 3 years of prior tank welding/fitting experience. Must be able to communicate effectively and accurately with employees and customers. Must be able to successfully pass required Weld Testing WPS FC-P1-P1-IL as determined by CWI/Quality Assurance. Welding will be FCAW (flux core) and incumbent must have experience in that process on storage tanks, or ships etc. Must be able to successfully complete all required pre-hire requirements. Physical/Site Requirements: Lift and carry heavy items weighing up to 45 pounds. Move in and around confined and cluttered places, and uneven areas. Full range of motion and flexibility consistent with age. Work up to a 12-hour shift in varying temperature extremes and other outside conditions. Climb and maintain balance on steel framework, stairs, ladders, and scaffolds. PPE footwear/prescription safety glasses or eye shields required. Graywolf Integrated Construction Company is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job Details Experienced Avalon and Tahoe - Alma, MI Undisclosed N/A Full Time High School $20.85 - $22.60 Hourly None Day ManufacturingDescription The mig and tig welders fabricate many different items, including pontoon tubes, walls, and furniture frames. All of the welding uses aluminum materials, but some of the aluminum is anodized. The welding areas are set up where each welder is working on a different part of the fabrication process. Key Responsibilities: Adheres to all safety policies and procedures Follows all pre-established installation and quality methods, procedures and guidelines to ensure consistency of work Reads order-specific job travelers and/or engineered drawings to ensure each order is produced to specifications Uses welders and various hand tools to fabricate pontoon tubes, wall frames, and/or furniture frames Completes all job duties within given time constraints Performs other duties as assigned Cross-trains between several different jobs Cleans and maintains work area Pursues continuous improvement to improve efficiency of job duties and work flow Qualifications Job Requirements: High school diploma or GED Previous welding experience Attention to detail Excellent problem solving skills Good verbal and written communication skills Needs good visual judgment to notice errors and/or defects Ability to accurately read a tape measure Ability to follow verbal and written instructions Ability to work in a fast paced, multifunctional team oriented work environment Ability to work variable hours with short notice (up to 50+ hrs. per week) Physical Requirements and Environment Must be physically capable of safely lifting a minimum of 60 lbs. without assistance, pushing/pulling 150-300 lb. items with the use of hand trucks or pallet jacks some items are large and/or awkward Involves standing, bending, twisting, lifting, and climbing ladders for long periods as required Requires repetitive movement Includes and noise levels that are distracting and/or uncomfortable Requires wearing personal protective equipment Involves extensive walking and exposure to all weather conditions Requires ability to hear and respond to radio communications Requires visual acuity for accurately receiving parts

Requirements: Read and interpret blueprints, sketches, or product specifications to determine sequence and methods for fabrication, assembly, and installation of product. Perform basic mathematical calculations such as addition and subtraction of fractions as well as utilize measurement devices such as tape measure. Setup and operate fabrication machines such as shear, press brake, punch, and hand tools AWS D1.1 minimum certification with SMAW, GTAW, GMAW for steel, stainless, and aluminum. Work within precise limits and standards of accuracy Ability to lift and maneuver up to 40lbs of material

We are looking for a Welder to join the team. This position is responsible for various types of weld preparation, welding and weld finishing to manufacture product to customer drawings, specifications, or other forms of instruction. What We Offer: * Medical, dental, & vision insurance with competitive premiums * 401(k) with 3% matching * Up to $5,250 of educational assistance per calendar year * PTO + 9 paid company holidays This job is for you if: * Your career goals include MIG, TIG or stick welding * You enjoy physical work * You can read and work from blueprints and follow detailed and specific instructions Key Responsibilities: * Proficient in assigned welding techniques and maintenance of equipment * Interpretation of mechanical drawings, including weld requirement symbology * Process inspection, certification and documentation * Finish grinding applications using manual and power tools * Make modifications to molds (i.e. add or remove screening, etc.) as directed. * Build and/or remodel equipment (i.e. carts, racks, etc.) as required for all departments. * Perform and assist with other related work as required. (i.e. machine maintenance, physical plant maintenance, etc.). Knowledge, Skills, and Abilities: * A high school diploma or GED equivalent required. * A minimum of two years of manufacturing and/or production experience required. * Knowledge in the safe operation of welding equipment, welding procedures and techniques and simple hand tools (i. e. hammers, drill, etc.) * Must be able to weld various types of materials (i. e. aluminum, stainless steel, carbon steel, etc.) with MIG, TIG or stick welding equipment in addition to using an oxy-acetylene torch and plasma cutter. * Able to read and work from blueprints and follow detailed and specific instructions * Knowledge of wire and filler materials applications for various steel alloys, aluminum and some exotic materials. * Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) * Conventional and precision measuring instruments Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasional, represents 1 to 33% or 1-2 hours of an 8-hour work day. Frequently, represents 34 to 66% or 2 1/2 to 5 1/2 hours of an 8-hour work day. Regularly, represents 67 to 100% or 6 to 8 hours of an 8-hour work day. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is regularly required to climb or balance and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision and peripheral vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the working conditions may be fair to somewhat undesirable. May be exposed to heat, noise, fumes and other elements to the point of being undesirable. AAP/EEO Statement: Tank Holding provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, creed, ancestry, sexual or affectional orientation, marital or veteran status, color, religion, sex, national origin, age, disability, genetics, status with regard to public assistance or any characteristic protected under federal, state or local law. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Read blueprints and drawings to take or read measurements to plan layout and procedures Be proficient in knowledge and use of fabrication techniques involved in the fabrication and manufacture of custom machinery and projects Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Proficiency in the use of all fabrication hand tools, including drills, grinders, cutting tools, squares, levels, etc. Be proficient in SMAW, FCAW, and GMAW welding processes in all positions. Certification may be required for some projects. Operation of machinery involved in the fabrication of machinery at structures. This may include operation of plate shears, ironworkers, drilling and tapping operations, plate burning equipment, plasma cutting, and handheld oxygen/acetylene torches. Test and inspect welded surfaces and structures to discover flaws Maintain equipment in a condition that does not compromise safety Understanding, proficiency, and safe use of overhead cranes and rigging techniques Understanding, proficiency, and safe usage of lift trucks up to 8,000 lbs Welder/fabricators may be asked to help in the preparation of equipment for painting, assembly of equipment for shipping, testing of equipment, installation of equipment at customer sites and other duties required in daily production activities. Requirements Proven experience as a Welder using a variety of welding equipment and procedures (Mig, Arc, etc.) Heavy Plate Armor Welding required Experience with 1G, 2G, 3G, 4G positions strongly preferred Experience in using electrical or manual tools (saws, squares, tape measure, calipers, etc.) Ability to read and interpret technical documents and drawings (weld symbols, blueprints, etc.) Knowledge of relative safety standards and willingness to use protective clothing ( face-shield, gloves, etc.) Successful completion of a relevant apprenticeship program is required or a minimum of three years of experience Professional certification will be a plus High school diploma or equivalent qualification

Temp To Full-Time Job Responsibilities: The weld helper will help with the welding machines such as spot welding and robotic. Loading and unloading products. Metal finishing - grinding, sanding, and filling uneven surfaces, polishing and coating metal. Job Duties: • Metal Finishing • Material Handler • Forklift Operator • Inspection • Spot Welding • Robotic Welding Skills and Qualifications: • Entry Level Welding experience • Blueprint Reading Benefits once hired in! • 401k plan available -Enrollment is available after 1 year of service. Must be 21. Company match's .25 on the dollar up to 6% of the wage. •Affordable health insurance, single $35/wk, family $55/wk. (approximate) • Yearly cash bonuses • One week of PTO (prorated at the date of hire) *This is a drug-free workplace. All candidates must be able to pass a pre-employment drug screen and be willing to submit to a national background check. If you're interested in this position, please apply with a complete resume and work history.*

Job Summary: The Weld Technician is responsible for supporting day-to-day production at Bandit. This is achieved by working alongside production and engineering to troubleshoot and correct welding and robotic related issues. They will adhere to all Bandit safety, quality, inventory and production guidelines, standards, policies, and procedures. Duties and Responsibilities: Support related manufacturing at all Bandit facilities. Work with engineering teams to develop and test new products and procedures. Repair and maintain welding equipment. Clean welding equipment. Conduct training programs and other activities for employees. Interpret welding related requirements and troubleshoot welding problems. Review welding procedures, processes, and documentation, update as needed. Other duties as assigned. Qualifications and Education Requirements: High school diploma or GED required. Excellent written and verbal communication skills Proficient computer skills Robotic welding experience preferred but not required. Two (2) or more years of experience in related position Physical Requirements: Stand, walk, push, pull, stoop, pinch, grasp, and/or bend Requires employee to occasionally work both inside/outside in heat/cold, and/or wet/humid conditions. Occasionally required to use personal protective equipment (PPE) to prevent injury. Occasionally lift 30 pounds

Role Description: Weld Technician that will be working within and supporting a team environment. We are looking for a skilled Robotic Weld Technician to join our team and help us push the limits of aluminum fabrication using state-of-the-art robotic systems. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Additional job duties may be assigned. * Provide technical support in developing and improving welding processes * Set up fixtures and jigs for aluminum welding applications * Experience with weld path programming and touch-up techniques * Familiarity with weld inspection criteria (AWS D1.2 is a plus) * Ability to read blueprints, welding symbols, and use measuring tools * Troubleshoot part fit-up problems * Perform quality inspections and troubleshoot weld defects * Knowledge of robot programming and general welding maintenance (Fanuc, Kuka) * Controls knowledge (Allen-Bradley, Fanuc, SLC 500 and SLC 5000 family of controls and HMI) * Collaborate with engineering and production teams to optimize weld parameters * Maintain equipment and follow safety standards Expectations Employees are expected to follow all standards listed below: Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job. * Organize and maintain efficiency of personal work area. * Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management. * Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives. * Consistently adhere to and support company policies and procedures, including ISO14001, IATF16949, and safety regulations. * Accept instructions and perform job duties in a positive manner. * Treat all co-workers with dignity and respect. * Actively support the Globe Tech values Work Environment Work environment characteristics are representative of those that may be encountered by an employee to successfully perform the essential functions of this job. Employees may be subject to certain environments such as working near loud, moving mechanical parts. The following environments include: * Fumes or air borne particles * Extreme heat (non-weather) * Risk of electrical shock * Vibration Noise Level The noise level in the working environment will generally be high. Ear protection will be required. Physical Demands The physical demands describes below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following physical demands include: * Standing * Walking * Sitting * Use hands to finger, handle or feel * Reach with hands and arms * Climb or balance * Stop, kneel, crouch, or crawl * Talk or hear * Taste or smell * Weight up to 35 Pounds Special Vision Requirements * Close vision (clear vision at 20 inches or less). * Distance vision (clear vision at 20 feet or more). * Color vision (ability to identify and distinguish colors). * Depth perception (three dimensional vision, ability to judge distances and spatial relationships). * Ability to adjust focus (ability to adjust the eye to bring an object into sharp focus). Education/Experience/Certifications: To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred: Education: * High School Diploma or GED Experience: * Three to five years as a weld technician/programmer working with aluminum welding in a manufacturing environment. Certifications: * 2 year certificate in an electronic/electrician or robotic weld technical program or equivalent experience preferred Additional Skills Required: To effectively carry out duties and responsibilities in the job position the following skills are required: Computer skills: * Experience with basic computer systems. Communication skills: * Speak effectively with fellow employees or customers. * Read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals, etc. * Interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Mathematical skills: * Apply mathematical skills including addition, subtraction, multiplication, and division, as well as basic algebra. Other Skills: * Detail oriented. * Organized and able to meet deadlines while performing multiple duties. * Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Benefits Globe Tech offers a competitive wage, challenging opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

Paid Training for advancement Clean Foundry Michigan Works! Business of the Year Free family health insurance Matched 401K Life Insurance Paid time-off 10 Paid Holidays Barron's state-of-the-art manufacturing facility includes the most advanced techniques for precision metal casting, CNC machining, welding, and quality testing. Our highly-engineered products are used in aerospace, defense, space, energy production, and other commercial industries. If you have a passion for manufacturing and possess strong mechanical and supervisory skills, apply for this rewarding career opportunity. Primary Responsibilities: * Barron Industries is looking for an experienced TIG welder for a busy manufacturing company. Hours and pay of the TIG Welder: 3:00 pm to 11:30 pm $17 - $20 per hour dependent on experience Requirements of the TIG Welder: * Must possess a mechanical aptitude * Physically demanding position * Skilled in working with hand/power tools * Must be able to keep a clean work area * Must have problem solving skills * Capable of deburring own welds * Strong welding skills are a must (TIG & MIG) Stainless, Aluminum, steel * Must be skilled with hands tools * Willingness to learn new things * Qualified TIG welders should apply for immediate consideration. Benefits: * 401(k) matching * Dental Insurance * Premium Paid Health Insurance, single, +1 or family * Employee assistance program * Health savings account * Flexible Spending Account * Paid Life insurance * Paid time off * Professional development assistance * Referral program * Vision insurance Schedule: * Full-Time * 40+ hour work week * 2nd Shift - 3:00 pm to 11:30 pm * Monday to Friday w/occasional weekends Supplemental pay types: * Bonus pay Ability to commute/relocate: * Oxford, MI 48371: Reliably commute or plan to relocate before starting work (Required) Work Location: One location Background Check Disclosure: As part of our employment process, Barron Industries may conduct background checks on all applicants considered for employment. This may include, but is not limited to, criminal history, employment history, educational background, and other relevant records. By submitting your application, you hereby authorize Barron Industries to conduct such background checks in accordance with applicable laws and regulations. Drug Screening Disclosure: Barron Industries is committed to maintaining a drug-free workplace. As such, all applicants being considered for employment may be required to undergo drug screening as a condition of employment. This drug screening may include testing for illegal drugs and controlled substances. By submitting your application, you acknowledge and consent to undergo drug screening as part of the employment process, if required. Confidentiality and Consent: All information obtained through background checks and drug screenings will be treated confidentially and in accordance with applicable laws and regulations. Your consent to undergo such checks is voluntary; however, failure to consent may result in the disqualification of your application for employment consideration. Accuracy of Information: It is your responsibility to ensure the accuracy and completeness of all information provided to Barron Industries during the application process. Any misrepresentation or omission of information may result in the rejection of your application or termination of employment if discovered after hiring. Fair Credit Reporting Act (FCRA) Notice: If a consumer report is obtained for employment purposes, Barron Industries will provide you with a separate notice under the Fair Credit Reporting Act (FCRA), informing you of your rights and obligations concerning the use of consumer reports in employment decisions. Equal Employment Opportunity: Barron Industries is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, disability, or any other legally protected status in its employment practices. Contact Information: If you have any questions or concerns regarding the background check and drug screening process, please contact HR Department at ************ Acknowledgement: By submitting your application for employment with Barron Industries, you acknowledge that you have read, understand, and agree to the terms outlined in this Background Check and Drug Screening Disclosure.

Temp To Full-Time $250.00 Sign on Bonus Sheet Metal Fabricator/MIG Welder Pay Range: $19/hr 2nd shift Shift: 2nd (3pm-1:30am M-F or 3pm - 4am M-TH) Benefits Health Dental Vision Life 401k Assemble make-up air equipment; check and confirm work in accordance with job specifications, procedures, quality standards, and checklists Read and interpret blueprints and CAD drawings (training provided) Safely operate forklift and/or other lift equipment Mount fans, motors, burners, and gas manifolds Measure, cut, and install insulation Accurately complete checklists Suggest design and procedure improvements to improve quality and productivity and reduce cost Maintain high productivity and quality workmanship Qualifications and Skills MIG welding experience Ability to read, write, and do simple math, read a tape measure Good mechanical aptitude Ability to read and interpret blueprints and drawings Ability to operate a MIG welder and pass a pre-employment weld test Ability to operate cold saw, iron worker, shear, bend sheet metal Ability to safely and properly use a wide variety of tools, including hand and power tools Ability to safely and properly operate a forklift and/or other lift equipment Ability to stand for long periods of time Ability to sit, bend, squat, and kneel Ability to perform work from a ladder, reaching and working overhead Ability to work cooperatively with others in a team environment Ability to follow directions in standard practices and procedures Construction, assembly, or carpentry experience preferred #TSTRATHP

Structural Steel Welder - 2nd Shift - Livonia - $21.88 Per Hour + $2.25 Shift Premium for Second Shift *** This is a 90-Day Temp-To-Hire Opportunity! *** Reports To: Shop Superintendent, Leadman Role: The Welder’s primary role is to operate equipment as needed to complete welding assignments on time and in budget. The Welder reports directly to the Shop Superintendent, Leadman. Essential Duties and Responsibilities 1. Operate saws, shears, cranes and other shop equipment as needed. 2. Assist Fitter in fabrication process. 3. Proficient with the use of burning equipment. 4. Proficient at the identification and application of welds. 5. Follows all company policies and procedures for safety. 6. Maintain shop floor organization and cleanliness. 7. Any other duties as assigned. Position Requirements {Skills, Knowledge, & Experience} Skills Required: • Equipment operation, welding, and burning. Experience: • 2- 5 years structural and miscellaneous fabrication welding. Education: • AWS D1.1 Certification Physical Demands and Working Environment: The physical demands described here are generally representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the functions of this job, the employee is regularly required to speak and hear, stand, and sit for long periods. Vision abilities required include: close vision, distance vision, color vision, depth perception. Use of hands and arms for reaching, feeling, handling. • Site visits may involve loud noise and exposure to fumes, airborne particles, and vibration. Job/Placement Details: Shift: First/Days to Start; but MUST be willing to move to the Second Shift once acclimated and doing well, possibly as soon as hired. Schedule: First Shift: Monday through Friday from 6:30 AM to 3:00 PM. Second Shift: 3:30 PM to 12 AM (8 Hours) to 2 AM if 10 Hours. The Second Shift Always Starts at 3:30 PM. Overtime Policy: Paid over 40-Hours Worked in a week, Sunday through Saturday, at Time and a Half. Overtime Schedule: 5 AM to 3:30 PM, as required and Directed Wage: $21.88 Per Hour for First Shift & $24.13 for Second Shift A Pre-Placement Job Site Interview is required. A Demonstration of Skill Welding Test may also be required.

Are you ready for what's next? Come explore opportunities within Brunswick, a global marine leader committed to challenging conventions and innovating next-generation technologies that transform experiences on the water and beyond. Brunswick believes “Next Never Rests™,” and we offer a variety of exciting careers and growth opportunities within united teams defining the future of marine recreation. Innovation is the heart of Brunswick. See how your contributions will help transform vision into reality: As part of the talented WELD team, you will set up and run Robot Welders, Bancroft Welders, Laser Welders, Auto Sanders and other miscellaneous Fabrication equipment. You must be able to hand weld TIG (Aluminum and Stainless Steel) and MIG (Aluminum) At Brunswick, we have passion for our work and a distinct ability to deliver. Essential Functions: Running Machinery: Bancroft welders, laser welders, Robotic Welding, auto-sanders, and other fabrication equipment. Performs machine setups, product checks, and has the ability to make minor adjustments to machines to ensure continuous production. Ability and willingness to follow and question work instructions. Must understand and have the ability to do hand welding, MIG and TIG. (Aluminum and Stainless) Training: Instructs team members on the operation of machinery with focuses on safety, quality, and delivery. Assists with maintaining training logs. Testing: Utilizing test equipment and control plans to test assembled products for safety, function, and compliance. Safety and Housekeeping: Responsible for the safety and cleanliness of work cells. Takes charge in 5s efforts. Inspect work cells throughout the shift and inform other team members of areas for improvement. Communication: Escalates issues in a timely manner. Works with team to diagnose and resolve technical issues. Work in team environment to achieve goals. Quality: Maintain high quality standards; continuously monitor your production quality; visually inspect or measure parts throughout the production run; set up all required gauges and checks; inspect parts throughout the shift and address quality issues with the appropriate personnel. Problem Solving: Report of any mechanical or system problems to Senior Weld tech, or Supervisor and leadership. Work with Supervisors and Maintenance to assist in problem solving and resolutions on a daily basis. Relief: Performs work of Operator as schedule allows. Perform any other assigned duties as required throughout the day. Helps in other parts of Fabrication as needed. Utilize change request log for quality, engineering and maintenance needs. Diversity of thought and experiences is fundamental when imagining the unimaginable. Certain skillsets/experiences are necessary; however, others can be developed along the way. Required Qualifications: High School Diploma or GED required 1-3 years of experience in Weld environment Experience with reading prints and measuring parts using various calibrated tools Must pass internal welding test for TIG (Aluminum and Stainless Steel), MIG Aluminum Ability to identify and diagnose common failures Ability to operate fabrication equipment Ability to lift up to 50 pounds Communicate effectively both verbally and written Demonstrated problem solving skills to diagnose and resolve equipment issues Completes all required training required by company Meets all requirements of Fabrication Operator positions Dedicated to the personal safety of everyone A positive, can-do attitude understanding they are representatives of the Company Teamwork and collaboration-oriented Professional poise and presence Determination and bias for action Personal accountability/ownership mentality Act as role model by displaying good judgment, respect for others, and integrity Strong interpersonal skills and the ability to work with many different types of people Ability to command respect from peers versus demanding it Preferred Qualifications: Formal certification or training in Weld Experience with MS Office and Attwood systems preferred (e.g. CICS) Working Conditions: This position will require physical strength, agility, dexterity and standing or sitting for extended periods The anticipated pay range for this position is $26.27, hourly. The actual base pay offered will vary depending on multiple factors including job-related knowledge/skills, relevant experience, business needs, and geographic location. At Brunswick, it is not typical for an individual to be hired at or near the top end of the salary range for their role. Compensation decisions are dependent upon the specifics of the candidate's qualifications and the business context. This position is eligible to participate in Brunswick's comprehensive and high-quality benefits offerings, including medical, dental, vision, paid vacation, 401k (up to 4% match), Health Savings Account (with company contribution), wellbeing program, product purchase discounts, and much more. Details about our benefits can be found here. Why Brunswick: Whatever tomorrow brings, we'll be at the leading edge. As the clear leader in the marine industry, we're committed to our values and supporting our exceptional people. We offer and encourage growth opportunities within and across our many brands. In addition, we're proud of being recognized for making a splash with numerous awards! About Navico Group: Navico Group is a stand-alone division of Brunswick, the world's largest recreational marine business. Navico Group is the global leader in technology, systems and solutions for a variety of industries, from Marine & RV to Specialty Vehicles and beyond. Our broad portfolio consists of the industry's leading brands in Power Systems, Digital Systems, Fishing Systems, and Performance Components including Ancor, Attwood, B&G, BEP, Blue Sea Systems, C-MAP, CZone, Garelick, Lenco, Lowrance, Marinco, MotorGuide, Mastervolt, ProMariner, RELiON, Simrad and Whale. Our team is committed and driven, every day, to be the most trusted supply partner to the marine and mobile industries...and beyond. Next is Now! We value growth and development, recognizing that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please still consider applying. Brunswick is an Equal Opportunity Employer and considers all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status or any other characteristic protected by federal, state, or local law. Diversity of experience and skills combined with passion is key to innovation and inspiration and we encourage individuals from all backgrounds to apply. If you require accommodation during the application or interview process, please contact ****************************** for support. For more information about EEO laws, - click here Brunswick and Workday Privacy Policies Brunswick does not accept applications, inquiries or solicitations from unapproved staffing agencies or vendors. For help, please contact our support team at: ****************************** or ************. All job offers will come to you via the candidate portal you create when applying through a posted position through https:///************************** If you are ever unsure about what is being required of you during the application process or its source, please contact HR Shared Services at ************ or ******************************. #Brunswick Corporation

American Rheinmetall Vehicles, Inc. Next-generation solutions for the U.S. Armed Forces FLSA Status: Non-Exempt Approved Date: 3/8/18 Job Title: Mig/Tig Welder Department: Production Summary Welds together metal components of products such as steel bar, steel and aluminum details, fabrications, and plates along with many other weldments using mig/tig welding equipment by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. Connects cables from welding unit to obtain amperage, voltage, slope, and pulse, as specified by Welding Engineer or Welding Technician. Starts power supply to produce electric current. Strikes (forms) arc which generates heat to melt and deposit metal from electrode to workpiece and join edges of workpiece. Manually guides electrode or gun along weld line, maintaining length of arc and speed of movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. Welds in flat, horizontal, vertical, or overhead positions. Examines weld for bead size and other specifications. Applies filler rod manually to supply weld metal. Cleans or degreases weld joint or workpiece. Repairs broken or cracked parts and fills holes. Prepares broken parts for welding by grooving or scarfing surfaces. Chips off excess weld, slag, and spatter. Preheats workpiece with hand torch or heating furnace. Positions and clamps workpieces together or assembles them in jig or fixture. Tacks assemblies together. Competencies To perform the job successfully, an individual will need to perform the following competencies. Quantity of Work The quantity of work produced and the promptness with which it is completed. Quality of Work The ability displayed and accuracy of work produced, meeting company standards, and requiring little to no rework. Judgement/Knowledge of Job Knowledge of job, techniques, skills, equipment, procedures, materials, etc. Attendance/Dependability Punctuality and attendance. Teamwork/ Attitude Willingness and cooperativeness with co-workers and supervisors; ability to accept constructive criticism. Initiative/Independence The degree to which an employee searches out new tasks and expands their ability to perform assigned tasks without direct supervision. Adherence to Policy Follow quality environmental policies and have knowledge of AS9100 and IS14001. Adherence to Safety Follow safety procedures, security protocol, and wear proper PPE. Education and/or Experience High school diploma or general education degree (GED) and one to three years related experience and/or training; or equivalent combination of education and experience. Mathematical Skills Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Reasoning Ability Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel and reach with hands and arms. The employee may occasionally lift up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. American Rheinmetall Vehicles is an Equal Employment Opportunity (EEO) employer. It is the policy of the Company to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information.

DEPARTMENT: Pit Products, BSR, Heavy Assembly SUPERVISED BY: Welding Manager STATUS: Full time non-exempt Technique, Inc. is a Michigan-based stamping, tubing and welding facility offering the shortest lead-times and highest quality parts in the industry. We offer high-speed prototypes, ultra-low volume stampings, tubing and assemblies for production and emergency-based manufacturing for industries such as aerospace, automotive, medical and food processing. Technique, Inc. is a group of highly skilled technicians who consistently strive to improve the tools, technology and processes which allow us to continue growing at an incredible rate. The company is dedicated to the success of each team member in a culture that values safety, integrity, teamwork, learning opportunities and results. Position Summary: This position requires use of MIG/TIG welding equipment in accordance with job and customer demands, welding both stainless steel and carbon steel. The employee supports the quality assurance team with part layouts and inspections, which requires knowledge of GD&T and print reading. The employee will complete welding assemblies to customer requirements. We are currently hiring for both weld technicians and weld line leads, which has both more supervisory responsibility and a higher compensation. Essential Job Functions: Set up and use MIG/TIG welding equipment to weld basic GTAW and GMAW mild steel joints Assemble exhaust assemblies, racks, and prototyping fixtures Perform 1st piece table layouts and troubleshoot builds using CMM reports to get a good first piece Maintain job documentation Ability to load and run robot welder in auto and make needed repairs on assemblies after robot Investigate and correct issues that are found during a build and or inspection of an assembly Ensure that products shipped meet internal and customer requirements per CMM reports, blueprints, and AWS specifications Other duties as assigned Qualifications: EDUCATION: High School Diploma or GED, vocational training CREDENTIALS/LICENSURE: AWS Cerfication MINIMUM EXPERIENCE: 1-2 years welding experience in an industrial setting Position Type and Expected Hours: This is a full-time non-exempt position with a minimum of 40hrs / week with overtime as needed. Note: days and hours required may vary. Shifts include 1st , 7:00a - 3:30p M-F, 2nd, 3:30p - 2:00a, M-TH and Weekend Days 5:00a - 5:30p F-Sun. Shift premiums are available. Position Requirements (Skills & Abilities): Ability to multitask in a fast-paced environment Basic problem solving skills Ability to read blueprints and understand GD&T notation Basic arithmetic skills Basic understanding of CAD/Solidworks software Ability to use hand and layout/inspection tools Knowledge of exhaust assembly processes preferred Travel: No travel is required for this position. Other Duties: Please note this job description is not designed to cover or contain a complete comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Minimum Physical Expectations: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Environmental Expectations: While performing the duties of this job, the employee is frequently exposed to manufacturing processes that include and are not limited to; fumes or airborne particles, hazardous chemicals, moving mechanical parts, industrial equipment, and vibration. The noise level in the work environment can be loud. EEO Statement: Technique, Inc., is an equal employment opportunity employer. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work Authorization: Employee must be eligible to work in the United States, either by means of U.S. Citizenship, Work Visa or H1B sponsorship. E-Verify partner employer.

For more than 50 years Progressive Metal Manufacturing Company has fabricated high quality metal parts, from the completed delivery of virtually any type of component, fabrication, or assembly. We are ISO/TS16949:2009 Third Edition Certified with the experience, equipment, and talent to produce virtually any type of assembly, fabrication, or component. We specialize in prototype and short run jobs of 50,000 pieces or less. We have all the necessary tools, machinery and manpower to complete our customer's projects, from initial design to completed parts. Progressive Metal Manufacturing Company, founded in 1962, has over 70,000 square feet of manufacturing space located in Ferndale, Michigan. Our capabilities include: manufacturing all types of ferrous and non-ferrous metals for the automotive, truck, farming equipment, defense, and commercial industries. To the qualified candidate we offer: Medical and Dental Insurance, Life Insurance, Paid Vacation, 401K with company match, Paid Holidays, STD/LTD Disability Insurance, Vision, Profit Sharing, and more! Job Description Primary Responsibilities: Skilled at MIG welding with both Aluminum and Steel Performs weld operations using equipment and materials according to Production Package. Sets and adjusts production equipment and materials to ensure defect free welds. The ability to interpret engineering drawings and weld symbols. Regularly inspect in-process and finished parts for defective welds according to work instructions and procedures. Ensure quality standards are met to achieve zero defects. Repair welds using various welding techniques. Place or pack finished parts into designated containers and ensure proper labeling as instructed. Ensure all labels are legible and accurate to finished part. The ability to correctly set-up various welding machines (amperage, voltage, speeds, and pulse) maximizing their efficiency and effectiveness per application. Complete required paperwork and computer entries as required. Ensure accuracy of all entries. The ability to work overtime as required. Immediately inform leader or member of management of any machine malfunction, production quality, material requirements or safety issues. Performs repetitive bending, reaching and lifting actions involving material weighing in excess of 10 pounds up to 75 pounds. Ensure housekeeping duties are performed as a priority to ensure a clean, safe and orderly plant environment. Monitor production and material supplies. Notify appropriate personnel of shortage prior to running out. The ability to use fillet gauges, calipers. May perform other duties or work at different workstations as production needs require. Qualifications Qualifications: The ability to use fillet gauges and calipers. The ability to read and understand blue prints and weld symbols. Current welding certification is preferred Minimum Requirements: High school diploma or General Education Degree (GED) Two or more years of welding experience. Familiarity with over head crane. Must be able to pass initial testing. Must be able to work overtime based on business needs. Additional Information All your information will be kept confidential according to EEO guidelines.

Prototype automotive company in Sterling Heights is hiring. Experienced Body in White joining assembler. Should be versed in joining applications to include:RSW = Resistance spot welding PW = Projection WeldingGMAW = Gas metal arc welding ( also referred to as MIG) GTAW = Gas tungsten arc welding ( also referred to as TIG) SPR = Self piercing rivets ClinchCandidate needs to know at least 2 of the above items, and be self sufficient. Text Denisa at ********** if interested.

Specific duties and responsibilities max. 10 duties and responsibilities; please prioritize the duties according to the significance for the company's success and give a brief but precise description 1. Support production to achieve common goals (OEE & Technical Availability) according to the schedule given by the welding supervisor 2. Work with Advanced Welding Technicians and Specialists to create systematic and sustainable improvements to the welding shop floor 3. Investigating and determining of suspect weld seams with corrective actions 4. Lead technician on duty for any support that is needed and escalation of topics including a high level of communication and documentation for production and technical management 5. Perform & lead shift handover meetings (weld team and production) 6. Perform 5S and PM in the entire welding area proactively and according to the PM plan 7. Provide trainings to other team members to ensure good level of knowledge and team work 8. Perform adjustments & improvements on process monitoring system: 4D (OK/NOK detection, referencing, investigation) 9. Support Quality & perform release tasks (FO, LO, UCL, Poka Yoke, gauging, additional inspections, escalation) 10. Perform & lead trouble shooting for technical / quality issues to perform & improve parameter changes (robotics, laser, MAG) and fixture adjustments (mechanical, electrical, pneumatic, clamping) 11. Follow work instructions / process flows as provided for any job related tasks 12. Proactively highlight cost and scrap saving potentials on the welding shop floor Requirements general welding knowledge ( computer basics (MS Office) process knowledge relating to the automotive industry structured problem solving skills ABB robotic basics Trumpf, Fronius, SKS basics Maintenance background (mechanical, electrical, pneumatics) General understanding of Quality checks (Quality mindset) Leadership skills (projects, reporting, communication)