Welder Jobs in Keller, TX

**Travel Mig Aluminum Welder- Vancouver, Washington** Are you a skilled welder with a passion for travel and aluminum welding? We are looking for an experienced Travel Welder to join our team. If you have significant experience in aluminum welding, can describe your experience, and pass a weld test, we want to hear from you! **Responsibilities:** + Weld and fabricate aluminum components according to specific instructions. + Perform welding tasks in various positions. + Read and interpret blueprints for welding and fabrication tasks. + Pass fracture-tested weld tests. + Utilize MIG welding techniques and, preferably, pulse arc techniques. **Essential Skills:** + Experience in aluminum welding. + Proficiency in MIG welding. + Ability to weld in multiple positions. + Blueprint reading skills. + Capability to pass fracture-tested weld tests. **Pay:** $28-30/HR Starting + $150 a day per diem (7 days but must work all assigned shifts to receive 7 days) **Shift:** 4X10's Monday-Thursday (6am-4:30pm) **Additional Skills & Qualifications:** + Experience with pulse arc welding. + Familiarity with fitting, grinding, and tape measure usage. **Weld Test:** + Weld test at Vancouver facility Running uphill beads in 3G and 4G Aluminum weld test using MIG 3/64th wire to D1.2 standard (Pulse). + Weld together 5" long aluminum plates or coupons that is 3/8ths thick and there is no back-end strip and gouge it is just a v-groove and open back. + Visual test and break test to failure. **Why Work Here?** Join us for long-term employment stability as we work on the Maneuver Support Vessel (MSV) project, constructing 32 ships over the next 10 years. This is an excellent opportunity for candidates seeking a stable company with guaranteed work. We are open to candidates willing to permanently relocate. **Work Environment:** You will be working in a large-scale manufacturing environment that produces structural steel and aluminum parts for government projects, including bridges, dams, nuclear sites, boats, and barges. The shop is clean and primarily focused on aluminum work. Employees are required to wear steel-toed boots and safety glasses. **Pay and Benefits** The pay range for this position is $28.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Fort Worth,TX. **Application Deadline** This position is anticipated to close on Apr 18, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

At Atmos Energy, we enjoy an employee-focused culture with rewarding work, competitive pay, work-life balance, inclusion and diversity, and excellent benefits. Benefits offered include: Medical & Prescription Drug Coverage 401K/Retirement Savings Plan Dental Insurance Vision Insurance Basic Life Insurance Short- and Long-Term Disability Employee Assistance Program Company Holidays & Paid Time Off Flexible Spending Account (FSA) Health Savings Account (HSA) Educational Assistance LifeLock Identity Theft Protection Paid Training LinkedIn Learning Top Employer Recognitions America's Best Employers - Forbes Magazine The 100 Most Trustworthy Companies in America - Forbes Magazine Top Places to Work - Dallas Morning News Best Places to Work - Mississippi Business Journal Best Place to Learn - Dallas Chapter of the American Society for Training and Development (ASTD) THIS JOB DESCRIPTION DOES NOT ATTEMPT TO LIST ALL OF THE DUTIES THAT ARE OR MAY BE PERFORMED IN THIS POSITION Primary Duties 1. Conducts fabrication, design and welding of natural gas mains and service lines. 2. Fabricates portions of the system which include, but are not limited to, meter manifolds, industrial meter installations, measuring stations, pressure-regulating facilities, protective barricades, and other facilities needed for the system. 3. Performs tapping and plugging operations on pipelines of various sizes and pressures. 4. Assists Construction and Maintenance (C and M) as needed. 5. Demonstrates and applies the knowledge, skills and abilities to safely, timely and efficiently complete assignments within Company policies, procedures and applicable regulations. 6. Maintains records of work assignments including drawings, maps, measurements, man hours, equipment hours, mileage and materials used reports to comply with Company and regulatory requirements. OTHER DUTIES/RESPONSIBILITIES 1.May be required to hold stand-by duty, work shifts, holidays, weekends, emergency call outs, and occasional extensive hours. 2.Is subject to reporting outside regular work area. 3.Identifies, addresses, and reports safety and encroachment issues to their resolution and completion. 4.Is responsible for the safe operation and inspection of assigned Company vehicles and equipment. 5.Demonstrates support for and adheres to the Company's values, strategies, policies and procedures and exhibits the core values of AtmoSpirit, Customer Service, Safety and the Company's Code of Conduct both as an individual contributor, team member and/or leader of others. 6.Must become familiar with the contents of the Safety Manual, live by the spirit of its intent and become involved in creating and maintaining a safe working environment. Must complete all required safety training. MINIMUM REQUIREMENTS Educational/Experience Level A general educational knowledge normally acquired through a high school diploma or a General Equivalency Diploma (GED), completion of the Operator Qualification requirements for position. Certificates, Licenses, etc. Must have and maintain minimum Operator Qualifications (OQs) and classroom training for position. Must obtain and maintain any other required OQs and classroom training or certifications within six months. May be required to maintain a Competent Person certificate. Requires a valid driver's license and may be required to maintain a Commercial Drivers License (CDL). Requires an Appendix C Welder Certification Communication Skills Requires the ability to communicate with internal and/or external customers in order to obtain and/or provide explanations and/or information on technical concepts to individuals with expertise or knowledge of the technical area. Numeric Skills Requires the ability to perform basic addition, subtraction, multiplication and division.: Physical Demands 1. Ability to lift and carry 50 pounds from the ground to 32 inches. (Ex: lifting and carrying tools and equipment) 2. Ability to generate 75-foot pounds of force, pushing and pulling, at a contact point of 37 inches. (Ex: operating pipe cutters) 3. Ability to ascend/descend (8) 8-inch steps. 4. Ability to ascend/descend 18 rungs on a ladder. 5. Ability to bend, stoop, squat, kneel, and/or crouch. 6. Ability to crawl 10 feet. Work Conditions Works in an outdoor environment. Requires frequently performing activities including, but not limited to, stooping, bending, crawling, kneeling, grasping, reaching, climbing and lifting up to 100 pounds (e.g. lifting and pulling rolls of pipe). May have residency requirement due to call-out response time. Other Requirements Requires the acute sense of sight and hearing (corrected or uncorrected) and strong sense of smell. As a Safety-Sensitive position, pre and post-employment screenings, including but not limited to drug testing as outlined by the Department of Transportation (DOT) and Pipeline & Hazardous Materials Safety Administration (PHMSA), and motor vehicle record (MVR) background checks are required. Atmos Energy Corporation is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, or veteran status. Job Family: Service and Construction

Basden Steel Corporation is an AISC certified Steel company based in Burleson, TX. Utilizing our Texas and Oklahoma based plants and coupled with some of the industries most advanced equipment we provide structural steel services for Texas, Oklahoma and surrounding. Our business model, since the company was formed, has always been to deliver a turn-key steel package to our clients. "Seamless Service" has been our consistent motto. Our list of successfully completed projects ranges from Schools, Data Centers, Office, Industrial and Truss Heavy projects. We pride ourselves on our attention to the clients' needs and fostering a cooperative effort to successfully complete project after project. When you look at the number of repeats clients, we have our success speaks for itself. We are currently seeking to fill the following positions for our Night Shift: Welders - This position requires experience in Flux Core Wire Welding. Fitters - Experience in steel fabrication blueprints. Machine Operators - Experience operating CNC driven machines such as plate burning machines and beam line machines Material handlers - This position is responsible for receiving materials using Bill of Ladings and Purchase orders. Must have experience in operating forklifts, and overhead cranes. Helpers - Entry level position helping in different parts of the shop.

Southwest Construction is looking for a Welder's Helper/Equipment Tech to the team! If you are looking for a low pressure, family, and lifestyle-oriented work environment, you have found the right place! Our ideal candidate will be working in the fabrication department of the shop for welding/mechanical repairs and maintenance on the company small, medium, and heavy construction equipment. With a supportive management team, a cohesive shop team, and opportunities for merit increases and advancements within the department, Southwest Construction Services is a great place to work! Southwest Construction Services offers paid vacation, healthcare benefits, life insurance, and company paid Dental Care for employee only coverage. Also, we offer a voluntary 401k program. Purpose: This person will help with the fabrication and welding work under the supervision of the lead fabricator on the company's small, medium, and heavy construction equipment, working on different tasks regularly using problem solving skills to reach a solution including maintenance, troubleshooting, repairs, hydraulic systems, fuel systems, brake systems, electrical systems, computer-controlled components and much more. Job Duties: This is an entry level position. Responsible for fabrication and repair of our modern high-tech fleet of medium and heavy construction equipment. Properly document repairs made. Willing to learn system knowledge of Cat, Case, Deutz, Volvo, John Deere, Isuzu engine components very helpful. Road test, inspect, and troubleshoot to assess condition and diagnose equipment. Work directly with the lead fabricator to troubleshoot, adjust, disassemble, and repair diesel engines, on fleet construction equipment (skid steers, excavators, boom lifts, sky tracks, scrubbers, loaders, and more). Enhance your welding skills, Tig, Stick, Mig. Troubleshoot, repair, adjust, replace, and rewire electrical system components, such as ignition, lights, and electrical controls, including computer-controlled components. Work in conjunction with other shop and jobsite personnel. Maintain a safe and clean work area is required. Must possess or obtain tools for work. Work 40+ hours per week. Requirements: High school diploma/GED or equivalent work experience preferred Graduated or attending classes from an accredited technical school preferred One (1) year of experience in welding/maintenance and repair equipment preferred Valid driver license with good driving record ASE certification or accredited technical school helpful but not required Must be able to lift up to 100 pounds Knowledge of materials, parts, tools, and basic principles to repair construction equipment Availability to work overtime including weekends if needed Available Benefits: Health, dental, life, short and long term disability insurance. Flexible Spending Account/Cafeteria Plan 401(k) Plan Holiday pay

Welder Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers' standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001 and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description Under the direction of the Welding Group Leader or Supervisor, the Welder works from customer drawings and a traveler to fabricate and weld components to produce the highest quality products at the lowest cost, while meeting departmental performance standards, customer specifications and delivery requirements, in accordance with company policies and procedures. A Class A Welder is capable of performing all aspects of welding. Can weld any type of project while consistently meeting or exceeding cycle times. Have the ability to fabricate from prints without the aide of fixtures. Able to do prototypes while also working with engineering to develop fixtures. Capable of being certified. Requires little to no supervisor and has the ability to interpret blueprints and understands weld symbols at an advanced level. Minimum Qualifications: Job knowledge through suitable education or prior work experience Have the ability to regularly lift and/or move 25-50 pounds Meet minimum 20/20 vision standards (with corrective lenses if needed) Score a minimum score on the in-house welding test Knowledge on how to set-up weld machine and lay a quality bead for both Mig and Tig Ability to read and understand blueprints and weld symbols at an advanced level Knowledge of the metric system preferred Accurately measure and lay out locations for welded components Adjust weld as needed to accommodate varying thicknesses of steel Operate grinder, drill, band saw, torch Complete and maintain all required paperwork, records, documentation, etc. Follow and comply with all safety and work rules and regulations. Maintain departmental housekeeping standards Specific Duties: Using MIG and/or TIG, weld components together according to blueprints and Traveler While performing the duties of this job, the employee is regularly required to stand, use hands, stoop, kneel, or crouch. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and ability to adjust focus. Must work at a reasonable pace (measured by production efficiency) and within our quality standards to insure timely completion Check and verify part numbers prior to assembly of product to customer specifications Notify supervisor of part shortages before the part runs out Assist in training new employee in safe and efficient fabrication and welding methods Protective clothing/equipment requirement: Must supply his/her own welding helmet and safety shoes Requires the use of safety glasses and shoes, welding helmet, grinding shield, tight-fitting clothing without tears, hearing protection and gloves This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Description Job Summary: PowerSecure is seeking qualified candidates for exciting new projects throughout the US. Core competencies for the Mechanical Installer include the ability to complete HVAC installations including Piping Replacements, Equipment Installations including Chillers, Boilers, Air Handlers, Pumps, VAV Boxes etc. Our company provides a safety centric culture, great opportunities for upward growth, professional development, and competitive compensation packages. Minimum Qualifications: (Education, Experience, Knowledge, and Skills): + High School, GED Equivalency, and/or Trade School + Valid Driver's license preferred + Minimum of 3 years in the pipefitting trade in the institutional, industrial or commercial HVAC sector. + Experience with various types of pipe and fitment techniques, including screw pipe, grooved, compression, fusion, glue, sweat, braze and weld, of various materials including steel, copper, plastic, fiberglass etc, with diameters ranging from ½" to 6" or greater. + Hands-on experience with demolition and installation of various types of commercial HVAC equipment and related processes. + Experience with Sheet metal ductwork fabrication and installation (not required, but a plus). + Experience with electrical and controls installation (not required, but a plus). + Must be able to pass a government background check, drug test and other site pre-access requirements. + Apprenticeship program (not required, but a plus). + OSHA 10 training (not required, but a plus). + Position requires a willingness to travel to project locations when assigned to work on projects that require onsite presence for extended project durations. Job Duties and Responsibilities: + Collaborate with HVAC Foreperson and project team to ensure material and equipment needs are identified and scheduled prior to start of actual work. + Read and interpret construction drawings, project specifications, and equipment submittals. + Utilize construction plans to layout and install HVAC equipment and supports. + Lay-out, fabricate, install, repair, troubleshoot, and maintain piping systems, pipe supports, fixtures, and related domestic water, hydronic and pneumatic system. Systems will vary in complexity, size, and pressure rating. + Lay-out, fabricate, install, repair, troubleshoot, and maintain ductwork for ventilation applications. These systems will vary in complexity, size, and rating. + Must be able to work well with others and be able to take direction. + Train apprentices in work-related areas to enhance installation knowledge, productivity, and safety. + Strong organizational and planning skills; Able to effectively allocate and develop resources. + Reliable, self-motivated, and professional. + Maintain safe work environment by complying with safety policies and procedures. Physical Demands and Work Environment: Must be able to lift up to 50 pounds. Must be physically capable of walking, stooping, crawling, climbing, kneeling, crouching, handling, reaching, depth perception, field of vision, balancing, hearing, and talking. Workers can be subjected to possible bodily injury from pipe fitting equipment, tools, materials, etc. Work environment may include exposure to weather, extreme heat (including humidity) or cold, noise intensity level, atmospheric conditions, exposure to electrical shock, exposure to radiation, exposure to toxic or caustic chemicals, proximity to moving mechanical parts, working at heights, and working around explosives. About Us: PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join Our Power Team! (************** 3dissue. com/***********37/242401/HR-9-14-2020/index. html) We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: + Medical, dental, vision and life insurance coverage + Competitive pay and a matching 401 (k) plan + Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) + Flexible spending accounts/Health savings account + Wellness Incentive Programs + Employee Referral Program + Tuition Reimbursement PowerSecure is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. This position is not open to third party recruiters. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1. 35(c)

At ISCO, we put high value on appreciation and respect, and provide you with an opportunity to really make a difference. ISCO is a family owned and operated company born and raised in Louisville, KY that is focused on our team members' growth. ISCO offers a standard benefits package of medical/dental/vision, and 401k! ISCO Industries is an end-to-end piping solutions provider that specializes in HDPE, working with leading edge technology that makes us a market leader. Starting Pay Range: $18 - $22 (Depending on Experience) Description Welder's will fit and weld natural gas delivery products built from raw materials according to blue print specifications in accordance with API 1104 certification standards and procedures. Qualifications / Requirements: * Minimum of one year of experience in welding and pipe fitting * Pass 6G Butt and Tee Branch welding tests * Test to complete API 1104 certification * Ability to read and interpret blue prints and mechanical drawings * Understand API 1104 certification standards and procedures * Experience in turntable welding preferred * Agree to pre-employment and random drug and/or alcohol test as required by DOT Key responsibilities and accountabilities: * Receive raw materials for project and match to corresponding blue prints/drawings * Fit and weld project in accordance to blue print/drawing specification and API 1104 standards * Support production schedule to ensure minimum 'reworks' so that product is delivered to the client on time * Accurately maintain required records and documentation for each project as outlined by Fabrication Foreman and/or Manager * Uphold a clean and safe work area * Timely reports for any maintenance requirement needed for equipment in your work area so that production schedule is not affected * Follow ALL corporate safety requirements and standards including but not limited to; welder safety equipment, protective clothing, protective lenses/goggles, steel toed boots, etc. * Safely operate a forklift

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Essential Duties: * Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts. * Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station. * Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds. * Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications. * Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions. * Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays. * Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts. * Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face. * Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results. * Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols. * Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature. * Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing. * Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially. * Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size. * When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications. * Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area. * Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process. * Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity. Position Requirements: * High School diploma or GED equivalent preferred * Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals. * Proficiency in reading complex prints and specifications. * Must know how to properly use a weld gauge. * Read and write. Physical Requirement: * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

at TPG Pressure Inc Thompson Pipe Group is currently looking for a Welder ll. Pay Range: $20.00 to $25.00 + Shift pay Fluctuating Schedule Shift: between 3:00pm - 3:00am OT and Weekends as . What We Offer: Top-tier Medical, Dental, and Vision Benefits Benefits eligibility 1st of the month following 30 days of employment Safety Shirts after 90 Day Introductory period Safety prescription eye wear program Safety work wear subsidy after 90 day introductory period Referral bonus Program Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Training and Development Employee Discounts Career Opportunity! Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at ************************* This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions: FCAW welder qualified to weld on Fittings and pipe and make repairs according to qualifications Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA/ASME standards. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment. Organizational Support: Follows all policies and procedures; Supports organization's goals and values Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively. Self-Management Attendance/Dependability/Flexibility The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) An improperly illuminated or awkward and confining workspace Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding) Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch. The employee is repeatedly required to climb vertical ladders. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc. Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. EOE/AA - M/F/Vet/Disability Thompson Pipe Group - Pressure is an Equal Opportunity Employer Job Types: Full-time, Contract

AtWork Personnel is seeking experienced 6G PIPE WELDERS to join a growing manufacturing facility in Irving, TX. Perks of the role: Full Time Day Shift Overtime $24-$25 starting Weekly Pay Requirements: MIG, TIG, Flucorw and stick welding process, and must pass one or more applicable tests and Destructive and Non-destructive exam. REQUIREMENTS: • Welds pipe and structural steel • Welds brackets and braces and use grinders. • Performs position welds on code materials • Proficient in flame and plasma cutting torches • Experience reading and understanding blueprints • Operates basic cutting equipment • Works with different types and sizes of pipe and structural steel • Operates iron worker, overhead cranes, rigging, pipe threading machine, welding machine, tube bending machine, and various pneumatic hand tools safely QUALIFICATIONS: • Will be required to pass a 6G pipe test • Minimum 3 years of experience • Certification to weld on pipe or plate • Knowledge of different types and sizes of pipe, structural and vessels. Apply now for immediate consideration. Resume required.

At Greenbrier, we do the hard work that matters. The Greenbrier Companies (NYSE:GBX) is powering the movement of products around the world as a leading designer, manufacturer and supplier of freight rail transportation equipment and services. Greenbrier's heritage of hard work and industrial innovation is celebrated at every level of our organization. We structure our business to support teams that deliver innovative solutions for our customers while positively impacting the world around us. Greenbrier's success begins with people. We believe in supporting our global workforce through our unwavering attention to Safety, Quality, Respect for People and Customer Satisfaction. Our IDEAL commitment is rooted in these values, which promotes Inclusion, Diversity, Equity, Access, and Leadership, creating a culture where employees are fulfilled and feel good about coming to work every day. A diverse, qualified, and engaged talent base is the key to our success. Summary The Welder Technician, Associate is responsible for all aspects of refurbishing and repairing rail car components. This position ensures that all work is done in compliance with The Association of American Railroads, customer quality control requirements, and all company guidelines and safety rules are followed when performing duties. Duties and Responsibilities To perform this job successfully an individual must be able to perform the following essential duties satisfactorily. Other duties may be assigned to address business needs and changing business practices. * Complies with The Association of American Railroads regulations, quality assurance standards, and Greenbrier Rail Services Environmental Health and Safety policies * Performs assigned tasks under the direction of Supervisor and department leader and notifies Supervisor or department leader of materials and/or equipment needed to complete job tasks * Performs required refurbishing and/or repairs to rail car components using welders, grinders, cutting torches, and air arching * Performs minor repairs to tools and equipment to maintain them in good working order * Interacts with Supervisor and team members in a team environment and assists in the training and coaching of new employees when required * Maintains and establishes basic knowledge and fundamentals of The Association of American Railroads repair procedures * Performs set up and operation of metal working tools such as welder, grinder, cutting torches, and other tools related to the work process * Complies with special processes assigned, based on work orders Qualifications The following generally describes requirements to successfully perform the assigned duties. Minimum Qualifications * Ability to prioritize multiple tasks while ensuring attention to detail * Ability to use measuring equipment such as a ruler and other precision measuring equipment. * Ability to work and communicate within a team setting * Ability to use machines and tools that are used for welding, cutting, gouging, inspecting, and testing * Experience with the following welding processes: burning, air arc, and grinding * Valid Driver's License is required for positions in Modesto, CA Preferred Qualifications * One + years work experience in a manufacturing environment Work Environment and Physical Requirements Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The physical environment requires the employee to work in hot and cold environments, in and out of the weather, work safely around heavy equipment and on top of and under railcars, as well as around railroad tracks. Employees are required to use personal protective equipment such as steel toe boots, hard hat, hearing protection, safety glasses, welding and grinding shields, etc. or as environmental conditions dictate Physical Activities and Requirements Frequency Key Not Applicable: Activity is not applicable to this occupation Occasionally: Occupation requires this activity up to 33% of the time (0- 2.5+ hours/day) Frequently: Occupation requires this activity from 33% - 66% of the time (2.5: 5.5+ hours/day) Constantly: Occupation requires this activity more than 66% of the time (5.5+ hours/day) Working Postures * Sit: Occasionally * Stand: Frequently * Walk: Constantly * Bend: Frequently * Kneel/Squat: Frequently * Crawl: Frequently * Climb: Frequently * Reach Forward: Frequently * Reach Upward: Frequently * Handling/Fingering: Frequently Lift / Carry Requirements * 5-10 lbs: Frequently * 10-25 lbs: Frequently * 25-50 lbs: Frequently * 50-75 lbs: Not Applicable * 75+ lbs: Not Applicable Push / Pull Requirements * Up to 10 lbs: Frequently * 10-25 lbs: Frequently * 25-50 lbs: Frequently * 50-75 lbs: Not Applicable * 75+ lbs: Not Applicable EOE including Vet/Disability Click here for more information: Know Your Rights Greenbrier makes reasonable accommodations in the application and hiring process for individuals with known disabilities, unless providing accommodation would result in an undue hardship. Any applicant believing that he or she may need reasonable accommodation for any part of the application and hiring process should contact Greenbrier Human Resources at **************** or call us at ************. ----------------------------------------------------------------- Email communication from The Greenbrier Companies (Greenbrier) will always come from a corporate email address that ends in @gbrx.com or from our applicant tracking system, iCIMS, after you have created a secure account and submitted your application. During the application process, you will create a secure account in our secure applicant tracking site that ends with "-gbrx.icims.com". In this portal, we will ask you to provide your contact information, past employment history, education history and other job-related information.

Valtir is currently looking to hire a Career Fitter/Welder team member for our Fort Worth, TX plant.

Do you get satisfaction from helping people make their dreams come true, and want to share your passion for the Welding trade? If you do, the Welding Instructor position at Tulsa Welding School might be the job for you! We are looking for an experienced welder who is an enthusiastic individual, has a caring and engaging personality, a pleasant and steadfast demeanor, and great communication skills. A positive attitude and great work ethic are essential. Responsibilities: * Maintain accurate record keeping as it applies to student attendance and grades. * Create and maintain a safe environment at all times. * Manage tools assigned to the classroom and issue, inspect, repair, and teach proper handling of tools. * Maintain control of student activities and ensure compliance of school policies and rules. * Ensure an ethical and fair testing environment during periods of testing. * Maintain classroom equipment through evaluation, inspection, parts ordering, and repair. * Constantly evaluate curriculum to ensure relevance and maintain a working field knowledge through continuing education. * Communicate promptly regarding supplies, tools or other essentials for students in the classroom. * Demonstrate continuing professional development of technical expertise and as an instructor. * Perform other duties as assigned Knowledge, Education & Experience: * Minimum of seven of welding field experience * Demonstrated leadership skills; ability to work individually and within a group * Strong organizational skills and attention to detail * Excellent written and communication skills * Established customer service background * Computer proficiency using Microsoft Office Products (Word, Excel, and Outlook) required Why should you apply? * Competitive benefits package including Medical, Dental, and Vision (with Company paid employee only dental & vision option) plus access to virtual doctor's visits * Flexible Spending Account and Health Savings Account options * 401(k) Employer Match * Short- & Long-Term Disability - Company Paid * Basic Life Insurance - Company Paid * 12 Paid Holidays * Your Birthday off - Company Paid * 2 weeks PTO - 1st yr. * Tuition Reimbursement * Employee referral bonus program * Headspace membership - Company Paid * Marquee Health Well-Being Program - Company Paid * Pet Insurance, Accident Insurance, and other optional insurance plans StrataTech Education - Core Values At StrataTech, we are zealous advocates of positive and sustainable life change through skilled trades education. We are laser focused on student success by focusing on organizational and operational improvements, a dedication to excellence in training programs, innovation and technology aligning industry transformations, and a culture built on human compassion, care, and service. Together, we are on fire to inspire and collectively strive to make a true impact in the lives of others. Collectively, our organizational core values are focused on promoting an incredible work environment, with genuine and authentic people, which is both challenging and fun, while focused on serving the needs of others. Together, we are united with the desire to make a positive impact in the lives we touch and in the communities we serve. * Challenging and Fun * Creating an Incredible Work Environment * Genuine People * Force For Good We are laser focused on student success by focusing on organizational and operational improvements, a dedication to excellence in training programs, innovation and technology aligning industry transformations, and a culture built on human compassion, care, and service. Together, we are on fire to inspire and collectively strive to make a true impact in the lives of others. StrataTech Education Group StrataTech Education Group focuses on the acquisition, growth and development of specialized career education schools, particularly skilled-trade programs designed to address the nation's growing infrastructure needs. The company's Tulsa Welding School subsidiary was founded in 1949 with campuses in Tulsa, Okla., Jacksonville, Fla., and Houston, Texas. Tulsa Welding School is accredited by the Accrediting Commission of Career Schools and Colleges (ACCSC) and is a member of the American Welding Society and the Career Education Colleges and Universities. TWS-Jacksonville is a branch campus of Tulsa Welding School, located at 2545 E. 11th St., Tulsa, OK 74104. Licensed by OBPVS and ASBPCE. Licensed by the Florida Commission for Independent Education, License No. 2331. Tulsa Welding School & Technology Center (TWSTC), a branch campus of Tulsa Welding School, opened and started training students in 2014. TWSTC is located at 243A Greens Road in Houston, Texas. The Refrigeration School, Inc (RSI) was founded in Phoenix, Arizona in 1965. RSI trains students in the technical services that are needed today and challenges the student to reach their highest level of academic knowledge and leadership capabilities. Accredited School, ACCSC. Licensed by the Arizona State Board for Private Post Secondary Education. Candidates must be able to successfully pass a criminal history check and drug test. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. In compliance with federal law, StrataTech Education Group prepares annual reports on campus security and resources. StrataTech Education Group's Annual Security Reports are available online at the link(s) below. Additionally, you may request a hard copy of the report by contacting the designate Clery Officer at **************. Tulsa Welding School 2024 Annual Security Report Tulsa Welding School Jacksonville 2024 Annual Security Report Tulsa Welding School & Technology Center 2024 Annual Security Report Tulsa Welding School Dallas 2024 Annual Security Report The Refrigeration School 2024 Annual Security Report StrataTech Global Privacy Policy Interested? Apply now! #ZR

Responsibilities: · Read blueprints and drawings and take or read measurements to plan layout and procedures · Ability to set own machinery to accommodations 10+ years' experience in MIG process, fit and fabrication - Proficient in GMAW Shop hours. 6:00 am to 2:30 pm Monday thru Friday. Pay rate: 17-22 Must have 5+ year experience Must have all PPE to take a weld Test Give us a call (817)624-1777 or (817)716-7069 Send your resume Fwrecruiter@alwaystherepersonnel.net

We are seeking an experienced welder to join the Ship to Shore Connector program. The ideal candidate will have extensive experience in welding 3mm and 10mm plates, including mirror welding. **Responsibilities** + Perform welding on the Ship to Shore Connector program. + Weld 3mm and 10mm plates. + Execute mirror welding tasks. + Utilize MIG, TIG, and aluminum welding techniques. + Read and interpret blueprints and sketches. + Apply shop mathematics to welding projects. **Essential Skills** + 5 years of MIG welding experience. + 6 years of aluminum welding experience. + 3 years of mirror welding experience. + Proficiency in MIG and TIG welding. + Ability to read blueprints and sketches. + Strong fabrication skills. **Additional Skills & Qualifications** + Three plus years of related (MIG and TIG aluminum) experience. + Formal craft training. + Preferred: Experience in mirror welding. + Demonstrated skills based on welding test results. **Why Work Here?** Join a company that values your well-being and professional growth. We offer a comprehensive wellness program, including fitness reimbursement. Enjoy medical, dental, vision, and 401(k) benefits with company funding. We also provide paid parental leave, ensuring a healthy work-life balance. **Work Environment** Work in an outdoor covered production/shop environment with a team of 230 people. **Job Type & Location** This is a Contract position based out of New Orleans, Louisiana. **Pay and Benefits** The pay range for this position is $28.75 - $28.75/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Dallas,TX. **Application Deadline** This position is anticipated to close on Apr 10, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

at TPG Pressure Inc Thompson Pipe Group is currently looking for a Welder ll. Pay Range: $20.00 to $25.00 + Shift pay Fluctuating Schedule Shift: between 3:00pm - 3:00am OT and Weekends as required. What We Offer: Top-tier Medical, Dental, and Vision Benefits Benefits eligibility 1st of the month following 30 days of employment Safety Shirts after 90 Day Introductory period Safety prescription eye wear program Safety work wear subsidy after 90 day introductory period Referral bonus Program Life and Supplement Life Company Matched 401K Retirement Plan Paid Holidays Training and Development Employee Discounts Career Opportunity! Who We are Thompson Pipe Group is a privately held family business of engineers, contractors, and manufacturers based in Rialto, California. From the humble beginnings, we built a family of products to meet the needs of all kinds of infrastructure. Each generation of products is better than the previous. Thompson Pipe Group is now the largest and most diverse drainage, sanitary, pressure and trench-less pipe provider, with manufacturing locations across the country and serving not just the US but all of North America. Please visit our website at ************************* This person will be responsible for the interior and exterior of every spirally welded cylinder that enters their designated station for welding defects, base metal defects, and dimensional tolerances and repairs those cylinders to meet specification requirements. Responsibilities Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA C200 and additional job specifications as required. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Essential Job Functions: FCAW welder qualified to weld on Fittings and pipe and make repairs according to qualifications Follow all safety rules, policies, and procedures. Inspections the entire interior and an exterior surface of spirally welded cylinders and perform repairs in compliance with AWWA/ASME standards. Reports repairs and dimensional measurements accurately of cylinders to the nearest 32nd of an inch. Utilize oxyacetylene cutting torch to square cylinder ends and perform repairs as needed. Performs minor maintenance and repairs to welding equipment and tools. Must properly use tools and care for equipment provided by the company to complete job tasks. Maintain workstation by keeping it clean, organized, free from clutter and trip hazards. Work under general supervision; will report to a crew leader and/or supervisor. Problem Solving and Innovation: Works well alone and in groups to identify and resolve problems in a timely manner; Meets challenges with resourcefulness and generates suggestions for improving work; Exhibits sound and accurate judgment. Organizational Support: Follows all policies and procedures; Supports organization's goals and values Communication: Listens and gets clarification; Response well to questions; participates in meetings and demonstrates group discussion skills; Writes clearly and informatively; Reads and interprets written information effectively; Presents numerical data effectively. Self-Management Attendance/Dependability/Flexibility The employee is occasionally exposed to fumes or airborne particles and risk of electrical shock There is machinery, moving equipment (cranes, bulldozers, and other moving equipment) and electrical hand tools at the job site Outdoors exposed to changing weather conditions (for instance, rain, sun, snow, wind, etc.) An improperly illuminated or awkward and confining workspace Working above ground level where the possibility of falling exists (i.e. on ladders, rooftops, bucket trucks, scaffolding) Loud (examples: metal can manufacturing department, large earth-moving equipment) Physical Demands: Reasonable accommodations may be made to enable individuals with disabilities to perform the job. While performing the duties of this job, the employee is regularly required to stand, walk, reach with hands and arms, balance, stoop, kneel, or crouch. The employee is repeatedly required to climb vertical ladders. The employee must regularly lift and/or move up to 25 pounds, frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds. The employee must regularly apply 75-foot-pounds of torque in the assembly, dismantling, erection, and installation of various types of structures, tank jig, scaffolding, etc. Regularly swings a 10-pound hammer. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. EOE/AA - M/F/Vet/Disability Thompson Pipe Group - Pressure is an Equal Opportunity Employer Job Types: Full-time, Contract

At Sabre Industries, we connect and power America's communities with world-class utility and telecom solutions. We reliably build a better world together; one customer, one team, and one community at a time. Our teams live out the organization's core values of integrity, commitment, innovation, and connection. That's how we continuously exceed our high standards of enterprise excellence-by creating a space for our engaged employees to thrive. With consistent hiring opportunities nationwide and countless career levels, chances are the next big step on your career path starts here. We work with our employees to create customized career paths and development in all facets of the organization. People will always be our greatest asset and we place emphasis on enhancing the lives of our employees. Scope of Responsibility: This position performs production within prescribed codes, and according to prescribed procedures, specifications, and drawings. Must complete Welder Training Program. Essential Duties: * Ability to plan, organize, pay attention to details and multi-task in a fast paced work environment * Works Independently with minimal supervision once assignments or responsibilities outlined and delegated. Displays a strong sense of ownership for work. * Flexible and Adaptable: Copes with ambiguity, change, and uncertainty effectively. Not hesitant to resolve lack of clarity, structure, or definition of outcomes then moves ahead. * Actively seeks and supports continuous improvement activities in process efficiencies, costs and effectiveness of work * Knowledge of general safety guidelines and Sabre's quality expectations and application in the work place * Uses the Flux Cored Arc Welding process to tack weld various small components to round or formed shafts to make a pole assembly for the welder to weld. The pole assembly generally consists of a round tube or formed shaft, baseplate, hand hole, arm mounting simplex, tenon top, vangs, step lugs, ladder clips, and/or other small parts. * Works in Large Pole department on individual fitter station to assemble pole assembly. Assist material handler in loading round tube or formed shaft on individual fitter station. * Reads and interprets drawings to determine parts needed to assemble pole assembly. Locate and gather Storeroom Personnel staged parts needed for assembly from parts staging area. Frequently pushes, pulls, and lifts up to 50 pounds. * Reads and interprets drawing to assure proper location of various small part attachments. Layout various locations on round tube or formed shaft based upon interpretation of drawings and specifications. * Uses measuring tape, level, square, and angle finders to measure distances and angles. Adds, subtracts, multiplies, and divides feet, inches, fractions, and decimals. Uses table to convert fractions to decimals and decimals to fractions. * Uses plasma torch and oxy-fuel torch to cut steel. Uses jigs made at Sabre/Texas for laying out vang slots and for cutting holes in shafts for inserting hand hole rims, arm mounting simplex, couplings, and other small parts. Wear protective goggles or welding hood to protect eyes from harmful rays. * Moves around round tube or formed shaft as necessary to get into proper position to accurately measure and assemble components described above including standing on elevated platform when necessitated by the size of the shafts. * Uses motorized grinders, motorized buffers, stone grinders, and drills to help assemble pole assembly according to prescribed specifications, codes and drawing. Wears protective face shield and safety glasses to protect eyes and face. * Adjusts welding machine to achieve desired results within parameters of established welding procedures. Changes tips, ceramic cups, and electrodes in plasma torch as needed to achieve desired cutting results. * Finish weld various products of the unit to keep the product moving through the large pole department in a timely manner. Reads and interprets weld symbols. * Uses oxy-fuel torch to preheat parts prior to welding. Read codes and specifications to determine proper temperature and uses instruments provided to measure temperature. * Uses chipping hammer, wire brush, motorized grinder, and motorized wire brush at various times to clean welded areas. * Uses pneumatic drills and magnetic drills to drill and ream various sizes holes in poles as required by the drawing. * Wears protective equipment, including safety glasses, insulated welding gloves, welding cap, leather sleeves, and/or cape, and welding hood for protection against hot metal, arc rays, grinding debris, and other potentially. * Performs visual inspecting and identifies material discrepancies to assure welds have been completed satisfactorily in compliance with applicable drawings and specifications. Uses a weld gauge to measure weld size. * When called for by the drawings and specifications, must produce full-penetration welds as defined by American Welding Society code. Uses air-arc gouger to remove weld defects, and rewelds to meet specifications. * Uses overhead crane to load finished poles into bolsters for transportation out of the pole assembly area. * Welds other products in other areas, using either Flux-Cored Arc Welding or Gas Metal Arc Welding process. * Assist and instructs other welders and fitters when needed to overcome deficiencies in quality and/or productivity. * Additional duties as assigned Position Requirements: * High School diploma or GED equivalent preferred * Must have knowledge of basic shop mathematics, addition, subtraction, fractions, multiplication and decimals. * Proficiency in reading complex prints and specifications. * Must know how to properly use a weld gauge. * Read and write. Physical Requirement * Must be able to stand 100% of scheduled shift. Lifting, pushing, prying, and dragging heavy materials. * Must be capable of bending, stooping, crawling under or over and occasional climbing of stairs/ladders heights up to 6 or 7 feet. * Abnormal level of noise due to grinding, chipping, hammering requires hearing protection (ear plugs) be worn at all times. * Must possess adequate dexterity and stamina to sustain expected production effectively. * Must be able to work in fast-paced work environment * Must be able to lift up to 50 pounds. * Must be able to perform physical activities that require considerable use of arms and legs and moving entire body, such as climbing, lifting, balancing, walking, stooping, bending, twisting and handling of materials. * Position requires manual dexterity, arm-hand steadiness and a safety-minded individual. * Must be able to work in an open environment exposed to extreme temperatures. At Sabre Industries, we invest in your future with a competitive benefits program. As a full-time employee, you are eligible for: * Medical, Dental & Vision coverage * 401(k) with Company Match * Continuing Education & Tuition Reimbursement * Life and Disability Coverage * Paid Time Off & Paid Holidays * Health and Wellness Resources * Employee Discounts Sabre Industries is an Equal Opportunity Employer: M/F/Vets/Disabled/Sexual Orientation/Gender Identity

Valtir is currently looking to hire a Career Fitter/Welder team member for our Fort Worth, TX plant. Valtir has been an industry leader and global supplier of highway safety products for over 50 years. Working with industry partners and safety experts, Valtir continues to bring the next generation of innovative safety products to a dynamically changing market. Our products are specified, sold, and installed throughout North America and in more than 100 international markets. As a Career Fitter/Welder , you'll be responsible for ensuring that your team's daily work assignments are completed in accuracy on time and in a safe manner. You will be expected to be proactive in identifying and solving problems, and act with the utmost levels of integrity and safety. Location: Ft. Worth, TX Starting rate $21.00 per hour! Full-time: M-F, 5:00 am -1:30 pm What you will do: Lays out, positions, aligns and fits together fabricated parts of metal according to layouts and work orders, blueprints, schematics and sketches in preparation. Tack-welds pieces together. Applies appropriate welding processes to join, surface, fabricate and repair parts of metal or other welding materials according to layouts, work orders, blueprints schematics and sketches using manual, semi-automatic or automatic welding equipment. May operate production equipment to cut, punch, or form parts for welding. May lay out and mark weld points on parts or subassemblies. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools. May inspect completed work for conformance to specifications. Observes all standard safety practices and maintains and completes all required records. Follows all safety rules and practices. May be involved in safety committees or initiatives. Performs other duties as assigned. Performs flat fillet welds; Fits and welds simple assemblies; accurately measures within specified tolerances; reads blueprint; May operate automatic welding equipment (robotic welding) requires general supervision. Fits and welds complex assemblies; Ability to operate fabrication machinery as needed; Accurately measures within specified tolerances; Reads and interprets blueprints; Operates automatic welding equipment (robotic welding); May be proficient at multiple pass welding. What you'll need: Minimum 1 year of experience Pass welding test. Must be able to read specifications, shop drawings and blueprints. We Ability to perform all essential functions safely and efficiently. Ability to follow directions and maintain a professional work environment. Good verbal and written communication skills and the ability to work within a teamwork environment. Able to use measuring tools and inspection gauges. Basic shop math Regular and predictable attendance. Competitive Benefits & Programs: In addition to a thriving workplace environment, a comprehensive benefits package is provided for our employees including: Medical and Health Savings Account. Dental and Vision Insurance. Maternity/Parental Paid Leave. Short-Term & Long-Term Disability. Life Insurance. 401(k) Plan with Company Match. Professional Development. Employee Assistance Program. Wellness Programs. Vacation, Holiday and Sick Pay.

TIG Welder/Fitter: Read prints, fit up, weld thin sheet metals, Stainless Steel, Aluminum, and Carbon Steel. Read tape measure, must have own hood, steel toe boots, gloves. Will be required to do a Vertical and Horizontal weld test for client at your interview. ASAP positions needed to be filled. TIG Welder/Fitter $16 to $22 hr. DOE welder TIG must pass test. 2nd shift-3:30pm-12:00am Mon- Fri, Some Saturdays / mandatory when needed! If you know MIG And TIG this can pay more! English and/or Spanishwww.alwaystherepersonnel.net