Welder Jobs in Echelon, NJ

Welder (FCAW & GTAW) Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com . Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

Job Title: Welder Department: Fabrication reports to the Production Supervisor - Fabrication Responsibilities: • Responsible for welding various metals: stainless steel, aluminum, carbon steel. • Welds and Fabricates custom parts using a variety of machines including but not limited to, Millermatic 250 Mig Welder, Syncrowave 350 LX Tig Welder • As workload requires, this position may involve other fabrication work in area's such but not limited to Fastener Insertion Press, Shear, Spot Weld Machine, Auto-weld machine, Milling machine, Deburring, and Sanding Equipment • Executes to work orders and engineering drawings • Receives verbal orders to fabricate custom designed parts and products • Receives written and verbal instruction on priority of orders • Receives, checks and handles raw material from inventory as needed • Sets up for daily work according to production schedule and/or verbal instructions • Checks parts, products and machinery for defects • Works at different workstations as job requires • Maintains a clean safe work area • Moves finished goods to other inventory or work areas • Assists with special projects as assigned by supervisor Requirements: • High School Diploma or GED • Must supply own basic hand tools • Must be able to safely operate a forklift and other material handling equipment • Able to MIG and TIG weld up to ¼” steel and aluminum. • Ability to Read and Interpret Quality Documents and Drawings • Able to perform basic mathematical computations • Must regularly be able to lift and move from 50 to 100 lbs • Must be able to tolerate long periods of standing Work Environment - Manufacturing: • Chemicals, (See SDS) • Machinery • Dust • Paint • Noise • Protective Clothing and Equipment Required Company Details: Havis is the leading manufacturer of products designed for mobile workers. Our company has a legacy dating back over 75 years as a trusted manufacturer and provider of mission critical equipment with a focus on the customer. Our headquarters is located in Warminster, Pennsylvania with additional facilities in Ivyland, Pennsylvania, Plymouth, Michigan and a fourth location in Burnsville, MN. We design, engineer and build safe, reliable, ergonomically efficient products. We strive to exceed our own high standards and our customers' expectations with flexible, integrated solutions. We pride ourselves in providing the finest quality products and services to our customers. We are committed to continually improving our products, our services and ourselves. Havis, Inc. - Website: ************* Havis designs, manufactures and sells equipment for the mobile workforce Headquartered in Warminster, PA with additional facilities in Ivyland, PA and Plymouth, MI ISO 9001 Certified Quality Management System Fast growing company in a niche but growing marketplace Company offers Health, Dental, Vision and 401(k) Plan with matching contributions 100% Employer Paid STD, LTD and Life & ADD benefits Generous Paid Time Off and Holiday benefits Competitive pay commensurate with education, skills, and experience Prepared By: Human Resources Approved by: Production Manager 2nd Shift (3:00pm- 11:00pm Mon-Fri)

We are seeking a skilled and motivated Welder-Fabricator to join our dynamic team in Warminster, PA. In this role, you will have the opportunity to work on a variety of projects, utilizing your expertise in welding and fabrication to create high-quality products. If you're passionate about your craft and enjoy working in a collaborative environment, we want to hear from you! Responsibilities Interpret and analyze blueprints and technical drawings to determine project specifications. Utilize CAD/CAM software to design and modify fabrication plans as needed. Perform welding and fabrication tasks using various techniques and materials. Ensure all work meets quality standards and adheres to safety regulations. Collaborate with team members to troubleshoot and resolve fabrication issues. Maintain a clean and organized workspace, ensuring tools and equipment are in good condition. Participate in ongoing training and development to enhance skills and knowledge. Qualifications Proven experience as a welder-fabricator or similar role. Proficiency in CAD/CAM software for design and fabrication. Strong ability to read and interpret blueprints and technical drawings. Knowledge of various welding techniques and materials. Excellent attention to detail and problem-solving skills. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. You should be proficient in: CAD/CAM Software Blueprint Reading Salary info: $20 - $35 / hr

Job Details Corle Building Systems, Inc - Imler, PA Full Time $21.00 - $27.50 Hourly 1st Shift ManufacturingDescription Corle Building Systems is an IAS accredited (USA) and CSA-A660 (Canada) certified manufacturer of pre-engineered steel building systems. We design and manufacture rigid frame clear span and multiple span buildings of all sizes. Due to continued growth, Corle Building Systems is searching for Welders on 1st shift to join our team. Welding candidates need to be proficient in MIG welding structural steel in the flat position, be able to read shop drawings, use an overhead crane, grinder and carbon arc. This role has a specific focus on developing and enhancing welding skills and knowledge of existing welding. Prior welding experience required. Benefits: $1,500 Sign On Bonus Perfect Attendance Bonus - $100/week Competitive wages - pay based on experience 100% Company Paid Employee Medical Coverage Family Medical Coverage options available Vision, Dental, Supplemental Coverages Paid vacation and holidays 401K Plan with up to 4% Company Match Employee referral program

Our client, a prestigious AS9100 certified company with over 65 years of industry leadership and innovation. Our commitment to excellence has been the cornerstone of our success, and we're looking for skilled Aluminum Welders to become part of our dedicated team. You will have the opportunity to: Perform high-quality aluminum welding using MIG and TIG techniques. Read and interpret blueprints with precision to ensure accurate welds and adherence to specifications. A safety focused mindset adhering to safety policies. What We're Looking For: Experience: Minimum of 1 year of aluminum welding experience with a strong focus on aluminum. Minimum of 1 year fabricating from blueprints. Experience welding to AWS D17.1 & D1.2 Aluminum standards. Skills: Expertise in aluminum MIG and TIG welding with a proven ability to pass certification tests. Blueprint Knowledge: Proficient understanding of blueprints to deliver precise and accurate welding. Upon on-site interview, you will be tested on the following: Aluminum 2G and 3G .090 square groove GMAW Why Work With Us? Work-Life Balance: Enjoy a four-day workweek, giving you three days off to recharge and enjoy life. Competitive Pay: Attractive hourly pay ranging from $25 to $35, depending on your experience and skills. Benefits: Full benefits package starts on the 1st of the month after 60 days of employment, including paid time off after 6 months (yes, that includes your birthday!) and paid holidays from day one! Your benefits will also include a tuition assistance program. Pay Range: $25 - $35 per hour (based on experience and skill), with 6 month performance evaluations Apply Now to Start Your Next Adventure!

Welder/Hauler JobID: 480 Operations/Mechanic E Date Available: Immediately Additional Information: Show/Hide Mechanic E, Welder/Hauler The Superintendent invites qualified and interested persons to apply for the position of Welder/Hauler. The Camden City School District is in the midst of a transformative period marked by progress. Since 2012, the graduation rate has increased from 49 percent to 70 percent while the dropout rate has decreased from 21 percent to 12 percent. Across all District schools, staff are focused on providing the appropriate supports to students to ensure they are successful. In the past few years, this focus has included a shift toward restorative practices and trauma-informed care, which has led to declining suspension rates and increased attention on school climate and culture. Phase Two of the Camden Commitment outlines the District's plan to ensure that every student in the city is enrolled in an excellent school that meets his or her unique needs. The Camden Commitment represents the District's belief in the power of high expectations and the extraordinary potential of our students. As a part of this plan, the District is in the process of streamlining and transforming the Central Office into a school support organization focused on ensuring that all schools are well-equipped to provide all of their students with an excellent education. JOB OVERVIEW: The Welder/Hauler works directly under the supervision of the Facilities Manager, Maintenance, and has responsibility for tools, equipment, and completing all projects in a workmanlike manner. REQUIREMENTS AND QUALIFICATIONS: MINIMUM QUALIFICATIONS: * High School Diploma or equivalent * Demonstrated knowledge of modern plumbing practices, materials, and equipment * Four (4) years' experience in the mechanics/maintenance craft * Valid New Jersey Driver's License * Possess a Black Seal License or must obtain one within two (2) years of employment * Ability to perform tasks relating to other industry trades preferred (i.e. electrical, plumbing, HVAC, carpentry, etc.). * Knowledge of basic regulations governing safety relating to the mechanics/maintenance craft * Ability to effectively interact and communicate with internal and external customers * Ability to perform tasks that require frequent heavy lifting * Focused on safety and security of District staff and students a must * Experience with typical office equipment, such as telephones, copier, fax machine, E-mail * Required criminal history background check, physical and proof of U.S. citizenship or legal resident alien status ROLE & RESPONSIBILITIES Major responsibilities of the role include, but are not limited to: * Expedite all work orders assigned in accordance with directions provided by Facilities Manager * Keep records on all projects in a manner set up by the Facilities Manager and maintain accounting records properly * Read blueprints and drawings and take or read measurements to plan layout and procedures * Determine the appropriate welding equipment or method based on requirements * Set up components for welding according to specifications * Cut and join metals and other materials to put together mechanical structures or parts with great precision * Operate angle grinders to prepare the parts that must be welded * Align components using calipers, rulers etc. and clamp pieces * Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) * Repair machinery and other components by welding pieces and filling gaps * Test and inspect welded surfaces and structure to discover flaws * Demonstrate critical thinking and problem solving skills * Communicate, interact and work effectively and cooperatively * Recognize the importance of safety in the workplace, including Public Employee Occupational Safety and Health Act (PEOSHA) regulations, practice safe work habits * Utilize appropriate safety equipment and report unsafe conditions the appropriate administrator * Be available when called upon by the Supervisor or Central Administrators after the regular work day * Will be required to support projects and initiatives in other departments throughout CCSD on an as-needed basis * Other duties as assigned by the Supervisor or Supervisor's designee PHYSICAL REQUIREMENTS * Frequently moves items weighing up to 50 pounds to pack, load, and deliver orders; exerting up to 50 pounds of force occasionally and/or up to 30 pounds of force frequently and/or up to 10 pounds of force constantly to move objects * Frequently lifts items weighing up to 50 pounds, including raising objects from a lower to a higher position or moving objects horizontally from position to position * Frequently bends and twists holding items weighing up to 50 pounds * Climbing/balancing - maintaining body equilibrium to prevent falling and walking, standing, or crouching on narrow, slippery, or erratically moving surfaces * Stooping - bending body downward and forward by bending spine at the waist * Crouching - bending body downward and forward by bending leg and spine * Reaching - extending hand(s) and arm(s) in any direction * Subject to atmospheric conditions including fumes, odors, dusts, mists, gases, or poor ventilation * Subject to extreme temperatures (temperatures below 32 degrees or above 100 degrees for periods of more than one hour, which may be exacerbated by wind and/or humidity) CORE VALUES We are seeking individuals who will exemplify the District's core values: Equity for All Students We make decisions and implement policies that honor all students' needs and empower our students and their families. We believe in equality of opportunity-all students deserve a fair shot. Respect and Humility We serve our community by recognizing the strengths, experiences, and perspectives of others. We humbly recognize our own limitations and incorporate lessons we gain from our reflective practice. Evidence-based We use evidence to inform decisions and to ensure that we are accountable to our students and families. Communication & Collaboration We communicate openly and work collaboratively, recognizing that getting to the best possible decisions requires input from others. Honest communications build trust and establish a community that assumes best intentions. Solutions-oriented With respect for the complexity of this work and the history that precedes us, we focus on persistence, resourcefulness, and inclusiveness to drive toward solutions. REPORTS TO & EVALUATED BY * Facilities Manager, Maintenance SALARY, EMPLOYMENT PERIOD, AND UNION AFFILIATION Salary Range: * Communications Workers of America (CWA) Mechanic E Salary Scale Employment Period * Twelve months, non-tenureable position Union Affiliation * Communications Workers of America (Pending availability of funds and State Superintendent's approval) THE CAMDEN CITY SCHOOL DISTRICT IS AN EQUAL OPPORTUNITY/AFFIRMATIVE ACTION EMPLOYER

**Hiring experienced Welder/Fitter for an opportunity in Delaware County, PA** **We are immediately interviewing and hiring 2 welders a growing industry leading manufacturer. This is a long-term career opportunity. Apply today to earn weekly pay, overtime, and enhance your skills within manufacturing operations. We are offering the opportunity to earn referral bonuses!** **Pay:** The starting pay is $28 per hour based on interview/experience. **Shift:** This is a daylight, first shift 6am-2:30pm, with overtime available **Job Description:** We are seeking a skilled Welder and Fitter to join our team. The role involves fitting components for heat exchangers, tanks, vessels, and boilers, performing Mig welding from blueprints, and measuring, cutting, and grinding materials. The successful candidate will be fabricating tanks and pressure vessels for various industries including refining, petrochemical, food and beverage, and power. The materials range from carbon steel, stainless steel, to nickel alloy with thicknesses between 3/16 to 1 inch. **Skills:** + Proficiency in Mig welding. + Experience with fitting components. + Ability to read and interpret blueprints. + Experience with carbon steel and stainless steel welding. + Knowledge of ASME code. + AWS Certification preferred. APPLY TODAY HERE **Pay and Benefits** The pay range for this position is $28.00 - $28.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Chester,PA. **Application Deadline** This position is anticipated to close on Apr 29, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Labor One is currently hiring Pipe Welders in San Diego, CA at a Shipyard. Pay rate is up to $26 + $160 perdiem, if eligible. Job Requirements: Three years of experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Must pass a background check, vision test and drug test. Must be able to work any shift and overtime.

AIRMATIC, Malvern PA, is recruiting a skilled Millright Welder Mechanic living within an hour of our Malvern headquarters to join our Field Service Team. We install bulk materials handling equipment in the Middle Atlantic and New England States. We are looking for a hard-working professional who enjoys meeting challenges and exceeding Customer expectations. Our skilled Industrial Mechanic has experience in multi-arc welding processes, a combination Welder who is practiced in SMAW (STICK), GMAW (MIG), FCAW (FluxCore), GTAW (TIG) and Oxygen/Acetylene Flame Cutting and Carbon Arc Gouging. We're searching for a long-term Team member who is looking for a secure and rewarding employment opportunity. Some projects might require short-term traveling, for example, one to two weeks, but we pay all travel expenses including lodging and meals. RESPONSIBILITIES: Follow MIG, TIG, and/or SMAW/STICK welding procedure specifications to efficiently produce quality welds in flat, vertical, and overhead positions Read and interpret project plans, blueprints, diagrams, and written instructions describing assigned tasks Perform or assist with fit-up and preparation of weld, such as debur, grind, chip and hammer workpieces, to achieve proper surface Lay-out, position, align and secure parts and assemblies prior to assembly using straightedges, combination squares, calipers, flange line-up pins, wrap arounds, center finders and rulers Clamp, hold, tack-weld, heat bend, grind, or bolt components parts to obtain required configurations and positions for welding Inspect grooves, angles, or gap allowances to meet specification using micrometer, caliper, and precision instruments Assist with general site work such as loading and unloading equipment and materials, site preparation and clean-up Perform firefighting duties if necessary Maintain work area(s), assigned vehicle(s) and equipment in a neat, orderly, good working order Requirements POSITION REQUIREMENTS: Pass AWS D1.1 SMAW 3G & 4G combo welding tests Possess a valid driver's license Three (3) or more years of welding experience in cement, chemical, refining or similar manufacturing industries Pass background, and drug and alcohol screening Work at least an 8-hour shift and up to a 12-hour shift, which may include some weekends and holidays. NOTE: On some jobs overtime may be required Work in enclosed spaces, such as tanks, bins, and silos Wear fire retardant clothing and personal protection equipment Lift a minimum of 50-pounds and climb up to 250-ft in height Maintain facial hair daily so that a respirator/facemask can seal properly Work outside in harsh weather conditions, or inside in hot, humid conditions Freely comply with all MSHA, OSHA, Customer site, and AIRMATIC safety rules, regulations and procedures Adhere to AIRMATIC Code of Professional Conduct Carry-out complex oral and written instructions given by Site and General Foreman APPROPRIATE SKILLS, ATTRIBUTES, AND INTERESTS: Desire and ability to work in a culture that rewards sound judgement, initiative, taking responsibility, honesty, passion and hard work Good oral, written, listening and interpersonal communication skills combined with an energetic, friendly and outgoing disposition Display a strong work ethic- punctuality, integrity, personal responsibility, emphasis on quality, discipline, and sense of teamwork COMPENSATION: An AIRMATIC Welder will receive a competitive compensation. Pay rate will be established upon successful completion of trade and welding tests and experience. AIRMATIC offers a Comprehensive Benefits Package which includes Medical, Dental, Vision, Life Insurance, Paid Vacation and Sick Benefits; Flex Benefits Plan; 401(k) Plan and Profit Sharing. AIRMATIC provides seasonal work clothing, PPE and other safety equipment, and mechanic's hand and power tools.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. * Ensure that all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met * Knowledge and proficiency of heavy shipyard construction welding in all positions using approved WPS (Welding Procedure Specification) determined by Hanwha Philly Shipyard and classification society * Welding process includes: * FCAW - Flux Core Arc Welding * SMAC - Shielded Metal Arc Welding * SAW - Submerged Arc Welding * EGW - Electro Gas Welding * Automated Welding Processes * Stainless Steel Fillet Welding * Padding and preparing weld joints per WPS * Carbon Arc Gouging * Note: Not inclusive, shall be determined by vessel specification and classification rules * Knowledge, understanding and demonstration of interpreting approved WPS set forth at Hanwha Philly Shipyard * Knowledge and ability on how to use all tools related to welding, including basic trouble shooting and maintaining welding equipment to assure a safe and efficient operation * Welder must proficiently demonstrate welding ability through performance, and testing as determined by vessel project and classification * Welder must be able to work in a team environment * Welder shall perform internal quality checks of own work performance to assure quality standards are achieved daily * Welder shall maintain their individual NDT rejection set forth by Hanwha Philly Shipyard and classification society * Perform other related duties as required and assigned COMPETENCIES * Work Independently according to valid instructions and Hanwha Philly Shipyard rules and standards * Flexible cooperation with team members * Must be able to work in different environments and areas (e.g. indoors, outdoors, in confined spaces, on scissor lifts and aerial lifts, and in inclement weather) * Ability to orient, train and instruct lesser skilled welders SUPERVISOR RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. * Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPERIENCE * High School Diploma or GED * 3+ years' work experience welding, (flux core and ceramic preferred) * Welding robotics and programming a plus OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Prep, layout, tack, weld, finish, and repair complex fabrications to work packages in accordance with product specifications, production schedule under the guidance of the shop superintendent. DUTIES AND RESPONSIBILITIES * Read and understand work packages, drawings, and blueprints. * Layout, position, align and secure parts & assemblies according to specifications by using tape measures, straightedges, combination squares, levels, and other various measuring tools. * Perform welding using the GMAW welding processes * Work within assigned group to move and position work pieces using overhead cranes * Operate hand and power tools such as magnetic drills, grinders, cutting torches and automated welding tractors, etc. * Inspect own work assure it meets product specifications, shop packages and is compliant before presented to QA * Inspect equipment to maintain functionality; report any equipment malfunctions * Set-up and operate machinery to support the fabrication such as punching, shearing, cutting, drilling etc. * Work with others to assist in the fabrication of multi-component fabrications * Dispatched to other buildings within the Navy yard and possible other job sites at times when requested * Various shifts may be required, including overtime and weekends. EDUCATION: * Required: High school Graduate, related Trade school and History of experience in this industry required QUALIFICATIONS: * 5+ year experience in fabrication industry * Have experience in the GMAW (Pulse and Spray), and FCAW welding processes GTAW is a plus. Must qualify to Plate in the 3-G and 4-G position Per AWS D1.1 using the GMAW process. Have performed structural welding in various positions to AWS D1. 1.. Proven past welding certification history is a plus. * US Citizenship required. * Understands welding symbols, decipher work packages diagrams, blueprints, and or other printed instructional material. * Can cut material by means of cutting torch, plasma torch track burner shears etc. * Safety focused. * Able to work in a team environment and self-motivated. * OSHA /10 safety training required provided by Rhoads, having an up-to-date Osha/10 a plus * Experience in MIL work Per TP1688 and past qualifications to TP248 in GMAW Pulse and Spray is a plus PHYSICAL DEMANDS: * The performance of this position involves exposure to construction or industrial areas where the use of personal protective equipment such as safety glasses, hard hats and hearing protection is required. Rhoads Industries, Inc. is an Equal Opportunity Employer, making decisions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, veteran status, and disability.

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. **Travel is Required for this position 75% of the time** Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications. · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys. · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.

MIG Welder - Immediate Opportunity! Riverton, NJ area $20.00 - $23.00 Hourly Welcome to Trotter Workforce, where we redefine possibilities in the world of employment. As a dynamic and innovative recruiting firm, we take pride in offering diverse career opportunities across a multitude of industries. Full Time Position Weekly pay Benefits Responsibilities: Perform MIG welding on various metal components and structures Operate welding equipment and tools such as stick welders, plasma cutters, and hand tools Read and interpret blueprints, schematics, and welding symbols Ensure welds meet quality standards and specifications Conduct inspections and perform necessary repairs or adjustments Collaborate with team members to complete projects efficiently and effectively Requirements Proven experience as a MIG Welder or similar role Proficient in MIG welding techniques and processes Knowledge of other welding techniques such as stick welding is a plus Familiarity with duct-work, pipe threading, and soldering Ability to read and interpret blueprints, schematics, and welding symbols Basic math skills for measurements and calculations Strong attention to detail and quality craftsmanship Ability to operate a crane for lifting heavy materials (if applicable) Physical stamina to stand for long periods of time and lift heavy objects BenefitsAt Trotter, we're not just filling positions; we're crafting teams that span the full spectrum of expertise. Whether you're an experienced professional or just starting your career journey, Trotter Workforce provides a collaborative environment for you to thrive. Join us as we shape the future of work, where the opportunities are as diverse as our workforce. Your potential has a place here at Trotter Workforce, where every role contributes to our collective success. Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disability, Protected Veteran Status, or any other legally protected group status.

Philadelphia, PA Position is for a Mechanical Engineer, Subject Matter Expert, with experience in the design, testing, installation, maintenance and alteration of in the area of Naval Ship HM&E systems, metallurgical evaluation, welding engineering, quality oversight, and structural inspections. Areas of experience preparing engineering design and installation drawings, and supporting calculations, instructions and processes for US Navy HM&E systems. NDT Level III certification in the following Non-Destructive Evaluation (NDE) and Non-Destructive Testing (NDT) techniques to include Visual Testing (VT), Dye Penetrant Testing (PT), Ultrasonic Testing (UT), Magnetic Particle Testing (Wet and Dry Methods), Radiographic Testing (RT), and Eddy Current Inspection (ECI). Requirements: * Bachelor of Science (BS) Degree in Engineering from an accredited college or university * US Citizen with Secret Security Clearance * Five (5) years of experience in the design, testing, installation, maintenance and alteration of Naval Ship HM&E systems, metallurgical evaluation, welding engineering, quality oversight, and structural inspections. * NDT LEVEL III Certifications

Job Details Philadelphia, PADescription Fritz Staffing Group is currently hiring for Welders for a project we have in Philadelphia, PA. The job is slated 4-8 weeks, you will be working 40-50 hours a week, per diem will be $110.00/day 7 days a week as long as you work your required hours and days. Pay will be discussed during interview process. Job Scope: Our customer is installing a Automated Car Parking System, so you will need to have experience in millwright, rigging, and if possible welding. You will be installing and fabricating all metal and machinery as well. All power tools and supplies will be supplied by the customer. Qualifications Job Requirements: OSHA 10 Drug Test LOTO, Fall Protection, Rigging, and Motorized Platform Certifications Experience in rigging 5+ years in millwright work Safety PPE Safety Toe Shoes Long Pants Hi-Vis Hand Tools

Job Title: Welder Department: Fabrication reports to the Production Supervisor - Fabrication Responsibilities: • Responsible for welding various metals: stainless steel, aluminum, carbon steel. • Welds and Fabricates custom parts using a variety of machines including but not limited to, Millermatic 250 Mig Welder, Syncrowave 350 LX Tig Welder • As workload requires, this position may involve other fabrication work in area's such but not limited to Fastener Insertion Press, Shear, Spot Weld Machine, Auto-weld machine, Milling machine, Deburring, and Sanding Equipment • Executes to work orders and engineering drawings • Receives verbal orders to fabricate custom designed parts and products • Receives written and verbal instruction on priority of orders • Receives, checks and handles raw material from inventory as needed • Sets up for daily work according to production schedule and/or verbal instructions • Checks parts, products and machinery for defects • Works at different workstations as job requires • Maintains a clean safe work area • Moves finished goods to other inventory or work areas • Assists with special projects as assigned by supervisor Requirements: • High School Diploma or GED • Must supply own basic hand tools • Must be able to safely operate a forklift and other material handling equipment • Able to MIG and TIG weld up to ¼” steel and aluminum. • Ability to Read and Interpret Quality Documents and Drawings • Able to perform basic mathematical computations • Must regularly be able to lift and move from 50 to 100 lbs • Must be able to tolerate long periods of standing Work Environment - Manufacturing: • Chemicals, (See SDS) • Machinery • Dust • Paint • Noise • Protective Clothing and Equipment Required Company Details: Havis is the leading manufacturer of products designed for mobile workers. Our company has a legacy dating back over 75 years as a trusted manufacturer and provider of mission critical equipment with a focus on the customer. Our headquarters is located in Warminster, Pennsylvania with additional facilities in Ivyland, Pennsylvania, Plymouth, Michigan and a fourth location in Burnsville, MN. We design, engineer and build safe, reliable, ergonomically efficient products. We strive to exceed our own high standards and our customers' expectations with flexible, integrated solutions. We pride ourselves in providing the finest quality products and services to our customers. We are committed to continually improving our products, our services and ourselves. Havis, Inc. - Website: ************* Havis designs, manufactures and sells equipment for the mobile workforce Headquartered in Warminster, PA with additional facilities in Ivyland, PA and Plymouth, MI ISO 9001 Certified Quality Management System Fast growing company in a niche but growing marketplace Company offers Health, Dental, Vision and 401(k) Plan with matching contributions 100% Employer Paid STD, LTD and Life & ADD benefits Generous Paid Time Off and Holiday benefits Competitive pay commensurate with education, skills, and experience Prepared By: Human Resources Approved by: Production Manager 2nd Shift (3:00pm- 11:00pm Mon-Fri)

Job Details Corle Building Systems, Inc - Imler, PA Full Time $21.00 - $27.50 Hourly 2nd Shift ManufacturingDescription Corle Building Systems is an IAS accredited (USA) and CSA-A660 (Canada) certified manufacturer of pre-engineered steel building systems. We design and manufacture rigid frame clear span and multiple span buildings of all sizes. Due to continued growth, Corle Building Systems is searching for Welders on 2nd shift to join our team. Welding candidates need to be proficient in MIG welding structural steel in the flat position, be able to read shop drawings, use an overhead crane, grinder and carbon arc. This role has a specific focus on developing and enhancing welding skills and knowledge of existing welding. Prior welding experience required. Benefits: $1,500 Sign On Bonus Perfect Attendance Bonus - $100/week 2nd Shift Differential - $1.00/hour Competitive wages - pay based on experience 100% Company Paid Employee Medical Coverage Family Medical Coverage options available Vision, Dental, Supplemental Coverages Paid vacation and holidays 401K Plan with up to 4% Company Match Employee referral program

MCR Services, Inc. has completed a wide variety of projects along the Eastern Seaboard from Virginia to Maine, which includes residential sub-divisions, schools, distribution centers, supermarkets, strip malls, retail fit-outs, commercial free-standing buildings, office buildings, hotel complexes and much more. Our mission, as an industry leader in the creation of commercial and retail facilities, is to provide the best quality of services to our clients through superior workmanship, dedication, commitment and meticulous attention to detail, ultimately delivering complete satisfaction. Our work ethics and values are the foundation to our success and we pledge to continue providing paramount services to our clients. Job Description Position summary: use hand-welding or flame-cutting equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products. Qualifications · Demonstrated experience as a professional welder. · Ability to strictly adhere to all safety standards. · Demonstrated ability to accept and follow instructions from others. · Willingness and ability to work cooperatively with others. · Strong knowledge of welding equipment, materials, etc.. · Must successfully complete pre-access drug and alcohol testing. · Must have a valid driver's license. Additional Information · Weld components in flat, vertical, or overhead positions. · Operate safety equipment and use safe work habits. · Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. · Measure dimensions of completed products or workpieces to verify conformance to specifications . · Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment. · Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys . · Select production equipment according to product specifications. · Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques. · Monitor equipment operation to ensure that products are not flawed. · Review blueprints or other instructions to determine operational methods or sequences. · Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment. · Clean workpieces or finished products. · Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools. · May perform other related duties as assigned. Must have, or be able to obtain, OSHA 10 certification.