Welder Jobs in Del Aire, CA

We have immediate openings for ALUMINUM WELDERS. You must be able to set up welding machines and equipment (both MIG and TIG); read and interpret blueprints to understand the product's specifications; weld, cut, grind and finish the product; and inspect your work for accuracy and quality and the ability to certify to our processes. Required Skills: Must be able to qualify in the following welding process: Aluminum TIG and MIG weld Multi-pass. All position fillet and butt welds using the following processes: SMAW (Shielded Metal Arc Welding), GMAW (Gas Metal Arc Welding), and FCAW (Flux Cored Arc Welding). Aluminum 5XXX Air Carbon Arc Gouging. Ability to properly use fillet and butt weld gauges. Experience working in a physically demanding environment (shipboard, sub-assemblies, ladders, staging, etc.). Familiarity with OSHA regulations relative to the shipbuilding industry. Welding Qualifications: All Welders are required to pass all position, Multi-pass Butt Weld, Welder Qualification Tests prior to reporting for the first day of productive work. These tests will be in accordance with MIL-STD-248D Paragraph 5.3.3. Job Requirements: Minimum 5 years Aluminum welding experience Aluminum 5XXX experience required Must pass drug and background screening DBIDS eligible Labor One Staffing is an Equal Opportunity Employer Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low earth orbit in May 2026. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast is looking for a Senior Welder and Fabrication, reporting to the Shop Floor Supervisor, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. This will be a full-time, non-exempt position located in our Long Beach location. Responsibilities: Weld the Haven Structure for Human spaceflight Operate mechanized and robotic welding equipment Ability to quickly fabricate, weld tooling to support Haven Inspect fabricated parts for geometry acceptance and weld conformance Fit, form parts, and clean parts as required and setup welding equipment in preparation for welding Perform Class A quality Aluminum weld Diagnose weld defects and suggest corrective actions, both in repair and process optimization Work with Engineering to improve tools and problem solve Material handling of raw goods and finished weldments Experience with a wide variety of metal fabrication equipment such as vertical bandsaw, Sanding equipment, Capability to efficiently set up jig tables Minimum Qualifications: 5+ years of experience with Class A TIG 5+ years of experience with fabrication, and forming experience Preferred Skills & Experience: Self-starter, highly motivated working in a fast-paced department 5+ or more years with Class A aerospace welding Experience reading engineering blueprints Ability to follow written and verbal instruction Familiar working with x-ray technicians and other NDT techniques Automated/robotic welding experience Preferred VPPAW Additional Requirements: Ability to travel up to 10% of the time Willingness to work evenings and/or weekends to support critical mission milestones Ability to lift up to 25 lbs unassisted Salary Range: California$36—$50 USDCOMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks.We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a “U.S. person” as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

At Vast, our mission is to contribute to a future where billions of people are living and thriving in space. We are building artificial gravity space stations, allowing long-term stays in space without the adverse effects of zero-gravity. Our initial crewed space habitat will be Haven-1, scheduled to be the world's first commercial space station when it launches into low earth orbit in May 2026. Our team is all-in, committed to executing our mission safely and on time. If you want to work with the most talented people on Earth furthering space exploration for humanity, come join us. Vast is looking for a Senior Welder and Fabrication, reporting to the Shop Floor Supervisor, to support the development of the systems that will be required for the design and build of artificial-gravity human-rated space stations. This will be a full-time, non-exempt position located in our Long Beach location. Responsibilities: * Weld the Haven Structure for Human spaceflight * Operate mechanized and robotic welding equipment * Ability to quickly fabricate, weld tooling to support Haven * Inspect fabricated parts for geometry acceptance and weld conformance * Fit, form parts, and clean parts as required and setup welding equipment in preparation for welding * Perform Class A quality Aluminum weld * Diagnose weld defects and suggest corrective actions, both in repair and process optimization * Work with Engineering to improve tools and problem solve * Material handling of raw goods and finished weldments * Experience with a wide variety of metal fabrication equipment such as vertical bandsaw, Sanding equipment, Capability to efficiently set up jig tables Minimum Qualifications: * 5+ years of experience with Class A TIG * 5+ years of experience with fabrication, and forming experience * Experience reading engineering blueprints * Ability to follow written and verbal instruction * Familiar working with x-ray technicians and other NDT techniques * Automated/robotic welding experience Preferred VPPAW Preferred Skills & Experience: * Self-starter, highly motivated working in a fast-paced department * 5+ or more years with Class A aerospace welding Additional Requirements: * Ability to travel up to 10% of the time * Willingness to work evenings and/or weekends to support critical mission milestones * Ability to lift up to 25 lbs unassisted Salary Range: California $36-$50 USD COMPENSATION AND BENEFITS Base salary will vary depending on job-related knowledge, education, skills, experience, business needs, and market demand. Salary is just one component of our comprehensive compensation package. Full-time employees also receive company equity, as well as access to a full suite of compelling benefits and perks, including: 100% medical, dental, and vision coverage for employees and dependents, flexible paid time off for exempt staff and up to 10 days of vacation for non-exempt staff, paid parental leave, short and long-term disability insurance, life insurance, access to a 401(k) retirement plan, One Medical membership, ClassPass credits, personalized mental healthcare through Spring Health, and other discounts and perks.We also take pride in offering exceptional food perks, with snacks, drip coffee, cold drinks, and dinner meals remaining free of charge, and lunch subsidized as part of Vast's ongoing commitment to providing high-quality meals for employees. U.S. EXPORT CONTROL COMPLIANCE STATUS The person hired will have access to information and items subject to U.S. export controls, and therefore, must either be a "U.S. person" as defined by 22 C.F.R. § 120.62 or otherwise eligible for deemed export licensing. This status includes U.S. citizens, U.S. nationals, lawful permanent residents (green card holders), and asylees and refugees with such status granted, not pending. EQUAL OPPORTUNITY Vast is an Equal Opportunity Employer; employment with Vast is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

The Welder-Tig/Laser/EB uses special machines, welds pre-machined stainless steel parts together that may or may not be located by means of tooling or machining. Duties and Responsibilities Follows traveler instructions and weld schedules on a production basis Assists engineering on prototypes, develops weld schedules based on similar parts Uses specific tooling and fixtures, makes minor setups Records completions and new weld schedule in log book Performs other related duties as required and assigned Education and Experience HS diploma required Minimum 1 year progressive experience in electro-mechanical assembly Friendly, enthusiastic and a good team player Efficient, accurate, attentive to detail Self-motivated and willing to take initiative

TYPE OF RECRUITMENT: Open Competitive Job Opportunity We welcome applications from anyone. EXAM NUMBER C-6110-L With more than 10 million residents, Los Angeles County has the largest population of any county in the nation. As the largest employer in Southern California, with more than 42 diverse departments and over 2,300 different job descriptions, the County offers a lifetime of opportunities and careers. We are Los Angeles County Public Works, the largest municipal Public Works agency in the nation. With more than 4,000 employees, Public Works offers over 500 different types of career opportunities that promote professional and personal growth as well as a rewarding and exciting work environment. Don't miss an opportunity to join our team! APPLICATION FILING DATES The application filing period will begin on Thursday, April 3, 2025, at 8:00 a.m. Pacific Standard Time. (PT) - Continuous. We will keep accepting applications until the position is filled. The application window may close unexpectedly once we have enough qualified candidates. If you have questions about working for LA County, including current open recruitments, tips on creating a resume or acing an interview, career planning, or any other general information, please visit our website at ************************ For more information about the amazing benefits offered by Los Angeles County, please visit us here: ************************benefits/ OUT-OF-CLASS EXPERIENCE OR WITHHOLDS WILL NOT BE ACCEPTED FOR THIS EXAMINATION. REQUIRED EXPERIENCE MUST BE FULLY MET AT THE TIME OF FILING, AND CLEARLY INDICATED ON THE APPLICATION. A Welder is responsible for performing a combination of the following essential job functions: * Fabricates, installs and repairs jigs and fixtures, equipment, machinery, steel and iron structures and parts requiring the forging or welding of metal from drawings, sketches, or oral instructions. * Fabricates parts for, makes alterations to, and repairs various kinds of construction equipment in the shop and field. * Facehardens construction equipment parts such as bulldozer blades, dipper teeth, track grousers, and bucket edges. * Forges, repairs, tempers, and sharpens various kinds of hand tools and power tool parts. * Fabricates and repairs various metal objects such as water tanks, playground equipment, guard and hand rails, ladders, and steel and iron structures. * Occasionally installs or repairs water, air, steam, gas or drain lines and appurtenances. * Performs rigging work to move or install equipment and machinery as needed. * Makes work estimates and orders supplies as needed. * Maintains work records. * Directs the work of assigned helpers. * Drives automotive equipment to and from work sites. SELECTION REQUIREMENTS: Four years' experience doing blacksmithing and electric and gas welding, one year of which must have been at the journey-level*. Vision: Normal color perception. LICENSE A valid California Class C Driver License is needed to carry out job-related essential functions. Certification by the Department of Building and Safety of the City of Los Angeles to do structural welding and certification by the American Society of Mechanical Engineers for boiler and pressure vessel welding may be required. PHYSICAL CLASS Physical Class IV - Arduous: This class involves frequent heavy lifting over 25 pounds, often combined with bending, twisting, or working above ground on irregular surfaces. It includes those positions that occasionally demand extraordinary physical activity such as those in Safety positions. SPECIAL REQUIREMENT INFORMATION * Journey-level experience is defined as possessing the required knowledge, skills, and training to perform a full range and diversity of work independently and reliably. Positions at this level operate with fairly significant freedom from day-to-day supervision and need little or no guidance on such matters as selecting appropriate problem-solving methods and techniques, locating appropriate regulations, or applying proper procedures to carry out work. In order to receive credit for the required license, you must include a legible copy of the license at the time of filing or within five (5) business days from the date of filing application. If you are unable to attach the required documents, please submit documentation to ************************ and indicate your name, the exam name and exam number. If you are a veteran, you may be eligible for veteran's credit, which is an additional 10% of the total points added to a passing score. We will need a copy of your form DD214 to review, so please include that with your application or email it to the exam analyst at ************************ within 5 (five) business days from the date of filing application We do not accept password-protected documents. Ensure documents are unlocked before attaching to your application or sending to the exam analyst. EXAMINATION CONTENT: The examination will consist of two (2) parts: PART I: A multiple choice and/or simulation assessment(s), weighted at 60%, assessing: * Mechanical Comprehension * Safety Orientation * Achievement * Teamwork * Responsibility MULTIPLE CHOICE AND/OR SIMULATION ASSESSMENTS ARE NOT REVIEWABLE BY CANDIDATES PER CIVIL SERVICE RULE 7.19. PART II: This assessment type will evaluate the training, experience, and education you list on a questionnaire and assign a score based on a standardized scoring system. An evaluation of Training and Experience (T&E), weighted at 40%, assessing: * Professional/Technical Knowledge of: * Welding * Equipment Usage Processes and Procedures * Hazardous materials/chemicals Storage Processes and Procedures Applicants must meet the Selection Requirements and achieve a passing score of 70% or higher on the combined scores for Part I and II in order to be placed on the eligible list. TESTING ACCOMMODATION: If you require an accommodation to fairly compete in any part of the assessment process, you will be given the opportunity to make a request when completing your application. Please note, you may be required to submit documentation from a qualified medical provider or other qualified professional to support your request for a testing accommodation. TRANSFER OF TEST COMPONENTS: If you have taken identical components recently for other exams, your responses may be automatically transferred to this examination. This exam contains test components that might be used on future exams, and your responses could be transferred to that exam. TEST PREPARATION: We provide study guides and other test preparation resources to help candidates prepare for employment tests. While the guides may help in preparing for the test, we recommend reviewing all related materials that seem necessary. * Various information can be found on our website at ************************job-search-toolkit/. The section dedicated to test preparation is "Employment Test Assistance." * Online practice tests are available at *********************************************** ELIGIBILITY INFORMATION: Applications will be processed as they are received and added to the list accordingly. VACANCY INFORMATION: The list of successful candidates created from this exam will be used to fill vacancies throughout the Department of Public Works as they occur. APPLICATION AND FILING INFORMATION: We only accept applications filed online. Applications submitted by U.S. mail, fax, or in person are not accepted. Apply online by clicking on the "Apply" green button at the top right of this posting. This website can also be used to get application status updates. Please fill out the application completely. Provide relevant job experience including employer's name and address, job title, beginning and ending dates, number of hours worked per week, and description of work performed. We may verify information included in the application at any point during the examination and hiring process, including after an appointment has been made. Falsification of information could result in refusal of application or rescission of appointment. Copying verbiage from the Requirements or class specification as your work experience will not be sufficient to demonstrate meeting the requirements. Doing so may result in an incomplete application and may lead to disqualification. SOCIAL SECURITY NUMBER: Federal law requires that all employed persons have a Social Security Number, so include yours when applying. COMPUTER AND INTERNET ACCESS AT LIBRARIES: For candidates who may not have regular access to a computer or the internet, applications can be completed on computers at public libraries throughout Los Angeles County. NO SHARING USER ID AND PASSWORD: All applicants must file their application using their own user ID and password. Using a family member or friend's user ID and password may erase a candidate's original application record. ANTI-RACISM, DIVERSITY, AND INCLUSION (ARDI): The County of Los Angeles recognizes and affirms that all people are created equal and are entitled to all rights afforded by the Constitution of the United Stares. we are committed to promoting Anti-racism, Diversity, and Inclusion efforts to address the inequalities and disparities amongst race. We support the ADRI Strategic Plan and its goals by improving equality, diversity, and inclusion in recruitment, selection, and employment practices. CONTACT INFORMATION Department Contact Name: Monica Ortega Department Contact Phone: ************** Department Contact Email: ************************ ADA Coordinator Phone: ************** Teletype Phone: ************** California Relay Services: **************

Hydraulics International, Inc (HII) seeks a highly talented Welder who can interpret designs, monitor machinery, and assess welded components ensuring the highest level of quality in our products. You should have in-depth knowledge of welding machinery within heavy equipment. You'll have a steady hand and outstanding attention to detail. Performance Deliverables: Cultivate a strong rapport and working relationships with key engineering and manufacturing staff and demonstrate effective cross-functional collaboration with team members Comprehensive technical skills to drive continuous improvement across manufacturing Read and comprehend fabrication drawings and welding symbols per AWS A2.4 Weld components per fabrication drawing: stainless steel, steel, and aluminum material with understanding of MIG and TIG techniques Partner collaboratively with engineering and manufacturing teams to make continuous improvement to work process for production and quality control Work with welding fixtures and jibs and ensure consistent accuracy and quality Knowledge of visual inspection acceptance/rejection criteria Requirements: H.S. Diploma or GED 1-3 years of welding experience. Experience as Manufacture Parts welding preferred Experience on TIG (GTAW) to weld steel, stainless steel and aluminum materials on .070 to .400 thickness Ability to pass qualification test per AWS D17.1, D1.1, or D1.2. Competencies Customer Focus - Anticipating, meeting and/or exceeding customer needs, wants and expectations. Flexibility - Readily modifying, responding and adapting to change with minimal resistance. Interpersonal Skills - Effectively communicat ing, building rapport and relating well to all kinds of people. Planning and Organizing - Establishing courses of action to ensure that work is com pleted effectively. Problem Solving - Defining, analyzing and diagnosing key components of a problem to formulate a solution Self-Starting - Demonstrating initiative and willingness to begin working. Teamwork - Cooperating with others to meet objectives. We offer competitive compensation & benefits package: 401(k) Dental insurance Health insurance (Dental, Vision, & Life Insurance) PTO About HII: HII headquartered in Chatsworth, California, U.S.A., is a leading supplier of integrated products, services and support to military forces, aviation and commercial industries, Government agencies and prime contractors worldwide. Focused on defense and commercial technology, the Company develops manufactures and supports a broad range of systems for over one hundred industries as well as mission critical and military sustainment requirements worldwide. We are extremely proud of the fact that our extensive design capabilities enable us to produce the most sophisticated units known to today's technology. Our corporate, engineering and manufacturing facilities, located in Chatsworth, CA and Forsyth, GA, encompass over 625,000 sq. feet. Our manufacturing facility is equipped with the latest state-of-the-art equipment such as CNC lathes and mills, computerized tube bending, and automatic press brake and programmable punch press, laser topography scanners, and other quality verification devices. HII has combined the greatest talent, skill, and equipment to best service our customers' demands. HII is an Equal Employment Opportunity Employer and strictly prohibits discrimination and harassment against qualified individuals based on their status as protected veterans or individuals with disabilities and prohibits discrimination and harassment against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability (including physical, emotional, and mental health), or status as a protected veteran. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact **************x200 for assistance.

Perform all freight car repairs inspect, repair, rebuild and service railroad freight cars in accordance with all AAR, FRA and Railroad rules with minimal supervision. This is accomplished through the use of hand tools, power tools, cutting torches and welding equipment. Work is of a physical nature and involves kneeling, bending and stooping. CONDUCT INSPECTIONS OF ROLLING STOCK (freight cars, flatcars, tank cars, etc.). Inspect rolling stock for defects or evidence of wear; inspect rolling stock for compliance with industry standards; inspect lading for shifting loads, clearances, and compliance with rules; inspect rolling stock damaged in derailments or collisions; conduct pre-trip inspections. REMOVE AND REPLACE DEFECTIVE APPLIANCES AND COMPONENTS. Remove and replace defective components on rolling stock (trucks, shoes, coupler assemblies, air brake systems). WORK WITH SHOP MACHINES AND TOOLS. Safely and effectively operate the following: acetylene torches, non-power tools (pliers, wrenches, hammers), power tools (drills, power saws, grinders); electric and gas welding equipment. PRACTICE SAFE WORK HABITS. Understand and follow company and industry safety rules, practices, and procedures, wear prescribed safety apparel; take appropriate action when conditions threaten safety of self or coworkers; ensure equipment and work area are in safe operating condition before starting work. Report all worked performed on proper billing sheets. Assist in opening doors and raising decks for inspection as needed. Assist in lowering decks and closing doors as needed. Ensure all equipment is kept clean and in good repair. Load and unload material as needed. Keep storage and repair tracks net and orderly. Assist in outer duties as needed. Qualifications QUALIFICATIONS Work Hours: Full Time. The weekly schedule may change as required. May be necessary to work weekends. Must be willing to work overtime as needed. On call 24 hours a day. Equipment Requirement: Required to wear back support belt, gloves, eye and ear protection, hard hat, work boots, and other necessary safety equipment as tasks dictate. Education and Experience: Required to have high school diploma or equivalent. Language Skills: Ability to read, write, and communicate English fluently and professionally. Ability to effectively communicate with and present information to all levels of employees, contractors, vendors, partners, owners and other inter-company divisions. Mathematical Skills: Requires basic analytical and quantitative skills with the ability to solve basic mathematical problems. Reasoning Skills: Ability to define problems, collect data, establish facts and draw valid conclusions. CDL is a plus PHYSICAL REQUIREMENTS Constant need (80% to 100% of the time) to be on feet. Have constant need (80% to 100% of the time) to perform the following physical activities: Bend/Stoop/Squat/Kneel Pick up debris, etc. Climb Stairs or ladder Routine duties require access to all levels of railcars. Push or Pull Move equipment, open and close doors, etc. Reach Above Shoulder Stock and remove files, parts, and or equipment. Grasp/Grip/Turning Handle tools and equipment, etc. Finger Dexterity Handle tools and equipment, type, etc. Lifting/carrying (supplies, files, parts, etc.): 25 - 75 lbs. Frequent need ( 10% to 20% of the time) 1 - 35 lbs. Constant need (80% to 100% of the time) NOTE: Lifting and carrying weights exceeding 50 lbs. is often accomplished with assistance from one or more people and while wearing the required, appropriate safety equipment. Examples of the heaviest items lifted include knuckles, brake beams, and uncoupling levers that weigh approximately 25 to 50 lbs. etc. Reliable transportation is required at all times. Must possess and maintain a valid driver's license at all times. Employee must be willing to take calls and report to work at any hour of the day or night. Out-of-town travel may be required. VISION REQUIREMENTS Constant need (80% to 100% of the time) to observe areas needing attention/correction. Read cautionary labels; respond to written instructions from staff. Constant need (80% to 100% of the time) to see things clearly beyond arm's reach. Observe and assist in general maintenance; observe problems throughout property. Constant need (80% to 100% of the time) to be able to differentiate common railroad signaling colors (red, green, yellow and blue). HEARING REQUIREMENTS Essential. Must be able (80% to 100% of the time) to hear things clearly and be able to receive verbal instructions. SPEAKING REQUIREMENTS Constant need (80% to 100% of the time) to verbally communicate with the staff, partners, vendors, etc. WORKING ENVIRONMENT Outdoors (80% to 100% of the time), all conditions, often for extended periods of time. Exposure (50% to 90% of time) to paint fumes, lubricants, dust, loud noises, etc. Example: repair of railcars and switching will be close by the work area. Employee may be required to travel to multiple locations throughout the United States and often to walk various areas which can be upstairs, noisy, dirty, uneven, or dark. Out-of-town travel may be required. REASONING DEVELOPMENT HIGH. Must be able to apply principles of logical thinking to a variety of practical situations and accurately follow standardized procedures that may occasionally involve minor deviations. Needs ability to think rationally beyond a specific set of instructions. Job Type: Full-time Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: Holidays Monday to Friday On call Overtime Weekend availability License/Certification: Driver's License (Preferred) Work Location: In person

Gallagher Staging provides the foundation for premier events across the nation. We offer custom and rental staging for concerts, tours, red carpet events, award shows, corporate events, studio and television production, sports events, and more! Are you passionate and experienced in fabrication? Do you have proven ability to produce quality output with a “can do” attitude? We are seeking a Fabricator/Welder to assist in our Fabrication Warehouse The Fabricator will assist in the day-to-day production of our standard and custom projects. Fabricator will review and understand blueprints to determine what materials, tools and processes are needed in order to complete the project. Examples of Duties/Essential Functions: Read design drawings and work instructions in order to complete project accurately Measure and cut materials to dimensions specified Willingness to work in multiple areas of concentration ranging from carpentry to hand grinding and polishing Assist with assembling and building components used for various sets MIG and TIG welding stainless steel and aluminum components in flat or vertical positions Examine work pieces for defects and measure workpieces to ensure conformance with specifications Safely operate basic shop equipment and machinery Weld components using welding techniques including MIG and TIG Conduct inspections to ensure the quality of finished projects Responsible for maintaining a safe, clean and work area Other duties as assigned Requirements Successful candidates must meet the following requirements: High School diploma or equivalent Minimum 2-3 years' experience working in a similar manufacturing environment Basic construction skills to work with steel, aluminum, wood, foam and more Proficient in using various power tools Ability to read and interpret blueprints and technical drawings Basic math skills for measurements and calculations Excellent attention to detail Proficient in basic computer software programs; Google Suite products a plus Excellent communication skills, both written and verbal The ability to lift/and move up 70 lbs. regularly Ability to stand long hours, use hands and wrist continuously in controlled movement Ability to maintain work in a fast-paced environment Self-motivated with the initiative to learn and be trained on various types of equipment and processes Excellent organizational and time management skills Ability to work a flexible schedule including nights, weekends and some holidays Salary Description $20.00

Burrtec is a well established refuse and recycling collection company serving over fifteen municipalities throughout Southern California and employing over 1400 full time employees. Burrtec continues to grow through co. acquisitions and successful bid proposals. Burrtec is a family owned company that firmly believes the key element to our success is knowing how important each employee is in the organization. We have the following position at our Santa Clarita Hauling division: Welder Under general supervision, performs arc welding activities on bins and roll off containers. ESSENTIAL DUTIES: Will perform welding tasks of metal objects by means of arc welding apparatus Helps maintain appropriate inventory levels of bins and roll-off containers. Follows safe work practices and uses appropriate Personal Protective Equipment Prioritizes workload according to operational needs Major and minor repairs on vehicles Rail repairs, arm repairs, carriage and equalizer repairs. R & R of hydraulic components Truck body repair Repairs from P.M Inspections Performs other yard related/operational tasks as directed by supervisor The duties and responsibilities described are not a comprehensive list; additional tasks may be assigned; or the scope of the job may change as necessitated by business demands. KNOWLEDGE SKILLS AND ABILITIES: Must have familiarity with hydraulic repair systems both fluid and electrical TRAINING AND EXPERIENCE: Previous experience in all facets of arc welding, oxy fuel procedures is required. PHYSICAL: This description requires that the individual walk, sit, stand, touch, stoop, lift and climb or move heavy objects up to 75lb on a intermittent basis Must have ability to stand, bend, squat and kneel. WORKING CONDITIONS: Will be exposed to outdoor weather conditions (heat, rain, wind, snow, fog). Will be exposed to moderate noise and dust levels. We offer competitive wages and an excellent benefits package including 401k and 100% paid medical/dental/life insurance and holidays/vacation/PSL.

Job Details Torrance, CA Full Time $22.00 - $26.00 Hourly DayWelder Robinson Helicopter Company is a leading manufacturer of civil rotorcraft with a 50-year history of providing affordable helicopters for a wide range of applications. Robinson Helicopter Company, located in Torrance, CA, is an engineering-focused organization that provides unique, challenging, and exciting opportunities to contribute to the future of vertical flight. We are actively seeking a Welder in our Weld Bay Department, reporting to the Manager of Fabrication and Assembly. This is a full-time, non-exempt position. Eligible for overtime. We offer comprehensive group health plans including Medical, Dental, Vision, and other supplementary plans. We also offer a competitive 401k Retirement Plan. Robinson Helicopter Company is an Equal Opportunity Employer JOB DESCRIPTION: TIG Welders are responsible for the fabrication and welding of aluminum, steel, and stainless-steel parts using the TIG process in accordance with RHC procedures and other data acceptable to or approved by the FAA. TIG Welders certify to AWS D1731 Aerospace Specification as required to manually weld aviation hardware from 0.020” to 0.300” thickness, in all positions. Welder ESSENTIAL FUNCTIONS & COMPETENCIES: •TIG welding of aluminum, steel, and stainless-steel components based on the specifications of the blueprints and/or drawings by means of TIG welding in all positions including the use of rotary turntables for welding. •Set up machines according to work instructions to trim, size, form, inspect, and GTAW (TIG) weld materials to meet drawing requirements. •Inspection of welds for accuracy, an inspection of root side weld defects, visual weld inspection using fillet weld gauges, calipers, micrometers, height gauges, and final weld fixtures. Weld inspection for weld size, face, and root reinforcement, cracks, inclusions, and porosity. •Proficiency in pre-heating and post-heating of weld elements. •Ability to read and interpret blueprints, drawings, and geometric tolerances. Drawing review for compliance for final dimensions, weld note callouts, base material, and filler material selection. •Basic mathematic skills include but are not limited to adding, subtracting, multiplication, division, geometry, and algebra for calculating material fabrication. •Full compliance with the Company's DOT Antidrug and Alcohol Misuse Prevention Program. •Regular and predictable attendance.

TABER, the leading manufacturer of custom millwork, metalwork, and upholstery in Orange County, is seeking a Metal Welder and Fabricator to join our growing team. The ideal candidate will have a strong background in metal work, welding skills, be familiar with fabrication, read work orders, and collaborate with other members of our team. You will be responsible for bringing our amazing projects to reality. Your projects will be amongst some of the largest and most preeminent ones in Southern California, and you will be working with many of the biggest contractors and sophisticated owners and architects. Are you ready to Be Awesome? We have a strong custom metal department, and we are looking to expand. We are willing to train and mentor anyone qualified for the position. Our ideal Metal Welder and Fabricator Candidate: 3 years of metalwork experience Proficiency in TIG and MIG welding skills Bonus points for expertise in welding brass and copper Extensive knowledge in fabrication processes Experience welding aluminum, stainless steel and steel Ability to communicate effectively with supervisors, discussing challenges and collaboratively brainstorming solutions to enhance productivity Company Core Values: Integrity, Accountability, Teamwork, Quality and Humility. Our company motto is Be Awesome, which we work toward everyday thanks to the incredible people on our team. We look forward to meeting you to see if you'd be the right fit here! Salary: $25-$35/ hour depending on experience Benefits: 401(k) Health insurance Schedule: 8+ hour shift with overtime Work setting: In-person Ability to commute/relocate: Santa Ana, 92705: Reliably commute or planning to relocate before starting work (Required) THIS IS AN ONSITE POSITION. No agencies and local candidates only. Due to the high volume of candidates, we are unable to respond to all inquiries. Taberco.net

Joins, fabricates, and repairs metal and other weldable material by applying appropriate welding techniques. Interprets bluevideos, specifications, diagrams or schematics to determine appropriate welding process. Inspects completed welds to determine structural soundness. Qualifications Requires a high school diploma or its equivalent. Additional Information Work schedule: candidate must be flexible to work either 1st or 2nd shift. 1st shift is 6:00am-2:30pm, Monday - Friday; 2nd shift is 2:30pm-11:00pm, Monday - Friday. Pay is 20+/hr.

Waev Inc. is an electric mobility OEM founded in 2021 to manufacture, distribute, market, and support the GEM, Taylor-Dunn and Tiger brands. GEM was the first commercially-produced, street-legal low-speed vehicle in the United States. GEMs shuttle people and goods across city centers, residential communities, government campuses, colleges and universities, and other micro-environments. Founded in 1949, Taylor-Dunn burden carriers, personnel carriers, and stockchasers have been trusted solutions in a broad range of commercial environments and provide premium reliability, safety features, and all-electric efficiency for industrial grade applications. Tiger heavy-duty tow tractors have been towing cargo, baggage, parcel, and other equipment in ground support applications since 1981. Waev's headquarters and factory are located in Anaheim, California. Duties and Responsibilities: •Perform welding tasks based on production schedules. •Inspect all parts prior to and following entering workstations assigned to; immediately report non-conformance issues to group leader and/or Supervisor. •Perform quality testing and documentation as required. •Accurately complete paperwork required for production records, including: labor reporting, move tickets, SPC charts etc. •Maintain regular, reliable attendance. •Follow all safety rules and regulations strictly and maintain a clean and orderly work area. •Maintain a consistent pace throughout the shift with focus on quality (i.e., within applicable quality standards). · •Rotate between workstations as assigned. •Perform duties assigned by Supervisor and/or Group Leader. •Work overtime as required and mandated by production schedules. Physical Requirements: •Ability to lift up to 40 lbs and push/pull up to 100 lbs. •Ability to bend, twist, turn, kneel, and squat. •Stand and walk up to nine hours per day, work overtime as needed and reach overhead continuously. •Work safely around moving equipment, power tools, and industrial vehicles. -Repetitive use of upper extremities. -Good hand-eye coordination and dexterity -It may be necessary to perform any of these functions up to twelve hours a day. Job Requirements:

Defense contractor involved with product development and manufacturing of various systems for military aerospace and vehicles in the Los Angeles International Airport area is searching for an experienced Welder. With a 50+ year foundation, The Marvin Group supports all branches of the Department of Defense and allies around the globe on an array of programs and platforms. We support many military prime contractors including Lockheed Martin, Northrop Grumman and Raytheon. RESPONSIBILITIES Read Blueprints and Drawings and take or read measurements to plan layout and procedures Safety First! TIG Weld experience a must. Tack weld and submit for inspection verification prior of completing the welding op. Follow instructions provided by Supervisor/ Engineering. Set up components for welding according to specifications (e.g. cut material with powered saws to match measurements) Operate angle grinders to prepare the parts that must be welded Align components using calipers, rulers etc. and clamp pieces Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead) Maintain equipment in a condition that does not compromise safety. Keep area clean, use lean and 6'S. Be on time, can do attitude! Welder Level I-II-III will be set base on experience or special skills. SKILLS / REQUIREMENTS Proven experience as welder Must be a AWS Welder certified to weld steel and aluminum, or have a current / still valid certification. TIG weld a must Minimum of 5-8 years' experience. Experience using a variety of welding equipment and procedures (TIG, MIG etc.) Experience in using electrical or manual tools (saws, squares, calipers etc.) Ability to read and interpret Blueprints technical documents and drawings Knowledge of relative safety standards and use of protective clothing (face-shield, gloves etc.) Deftness and attention to detail Professional Certification (e.g. an AWS welding certificate) will be a plus. (Must be able to certify IAW MEC Welding Procedures) Must be able to lift up to 35 lbs Must be able to speak/read/write English. Wear PPE at all times This position must meet export control compliance requirements. All applicants must be “U.S. persons” within the meaning of ITAR, as defined: a U.S. Citizen, a lawful permanent resident, political asylee, or refugee. Interested parties please apply online and submit resume to ********************************** Visit us at marvingroup.com

Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. We are currently looking to hire top field welders. Join our team and become a “tankee” traveling throughout our beautiful country! Compensation: Hourly wage based upon experience and skill set, plus per diem (to cover meals and lodging). Normal hourly wage paid for work-related travel (no overtime). Non-union. Occasional prevailing wage. Non-exempt. No PTO or paid holidays. Pay periods are weekly. Direct deposit is available. Benefits: Medical, dental, and vision benefits are available on the first of the month following a 30-day probationary period. Phillips Tank pays approximately 60% and employee pays 40% of medical benefit premiums. Employee pays 100% for vision and dental benefit premiums. Shift: Project work schedules vary. However, a typical work shift is daylight (10 hours per day, 5 days per week). Status: Full-time employee (subject to project availability and work schedules.) NOTE: Compensation, benefits, and other position details are subject to Phillips Tank's policies and procedures. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. Other duties as assigned.

Our printing and signage manufacturing partner in the Irvine area is seeking a TIG Welder/Fabricator to join their team! Ideal candidates must have a minimum of 3 years of welding experience, preferably in a manufacturing setting. If you're interested, please email your resume to kwebb@marqueestaffing.com and call 949-222-6430 and ask for Kyle! Shift: 2:00PM - 10:30PM, Monday - Friday $24 - $30/hr Based on Experience POSITION SUMMARY: Qualified candidates should have a minimum of 3 years welding experience (MIG and Light Gauge TIG .062 Thin) and proficient in reading and understanding build drawings. Ability to work well within a team and can handle multiple aspects of metal fabrication (cutting, bending, mill work, finishing and assembly). This position is responsible for analyzing assembly drawings, measuring material and cutting them to appropriate size and shape. The merchandise that is created in this area must have perfect dimensions and must be crafted without inconsistencies. Any questions regarding the assembly of the materials are to be communicated to the CAD draftsperson/Fabrication Foreman. ESSENTIAL FUNCTIONS: Welding steel and aluminum materials using (MIG/TIG) processes. Operates fabrication shop and machine shop machinery and equipment. Measures workpiece dimensions to determine accuracy of the work piece. Removes burrs, sharp edges, rust or scale from workpiece. Assemble work pieces to job specs. Operates any equipment needed to perform job. Performs related duties as assigned by department lead or department supervisor. COMPETENCIES: Communication Proficiency (verbal-written communication) Flexibility Initiative Learning Orientation Personal Effectiveness/Credibility Problem Solving/Analysis Multitask Mechanical Aptitude Technical Capacity Teamwork Orientation Welding and assembly skills Avoid injuries and must ask for help from other suitable employees when lifting heavy objects over 50 lbs. and/or large dimensions with 47 or more inches long. Using proper lifting techniques and proper lifting equipment. PREFER EDUCATION, EXPERIENCE AND SKILLS PREFERRED: Minimum High School diploma or equivalent experience required. 3+ years experience in a fabrication environment. 3+ years experience with (MIG/Light Gauge TIG) welding within a fabrication environment. Must know how to read a tape measure and calipers. Must know how to read and understand CAD drawings. Basic knowledge and experience with metal shop equipment including table saws, mitter saws, drill presses, rolling equipment, mill, lathe and metal shears. Some electrical and soldering knowledge is a plus. Ability to stand for long periods of time and lift 50 pounds. Applying safety rules and techniques. Ability to understand and apply safety practices regarding all machinery and tool usage. Open and available to work overtime including weekends.

About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are looking for a capable Welder who will be responsible for cutting and joining metals and other materials at our facilities or construction sites, using appropriate equipment. Your job will be to provide safe foundation for strong infrastructure. You should be competent in using potentially dangerous equipment following all safety precautions, have a steady hand and great attention to detail. Knowledge of different kinds of metal and their properties is also required. We will provide PPE, FRC, tools and equipment. We will also pay and train on safety. Field Welder responsibilities are: Explore and follow blueprints and drawings, taking measurements to plan layout and procedures Prepare the appropriate welding equipment or method based on requirements Prepare components for welding according to specifications (such as powered saws to match measurements when cutting material) Use angle grinders to prepare the parts that must be welded Use calipers, rulers etc. and clamp pieces to align components Use manual or semi-automatic welding equipment in various positions to weld components Check welded surfaces and structures for flaws by testing and inspecting them Keep your equipment in a condition that does not compromise safety Travel is required (75%+) Required Qualifications: Minimum 5 years' experience as a Welder using Flux Core (FCAW) and Stick (SMAW) Must have 2 years' experience in Tank Welding Must be able pass 2G/3G/4G Welding Test 7018/6010 Must have reliable transportation Must be willing to work overtime and weekends TWIC Card Preferred Qualifications: Solid experience using a variety of welding equipment and procedures, such as Flux Core and Stick able to use the automatic welding equipment The Goat and the 3 o clock Experience with cutting torch and arc gouging Solid experience using electrical or manual tools, such as saws, squares, calipers and so on Excellent knowledge of relative safety standards and willingness to use protective clothing, such as face-shield and gloves Good ability to read and interpret technical documents and drawings Agility, professionalism, and close attention to detail Successful completion of a relevant apprenticeship program is required Professional Certification, such as AWS welding certificate, will be a bonus HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will. HMTRSR

Temp SkillSetGroup is seeking experienced TIG Welders for our Santa Ana, CA location. Ideal candidates must have 3+ years of TIG/MIG/Flux Core welding experience, working with steel, aluminum, and Invar. The position requires vertical welding, working in tight spaces, and the ability to read blueprints. Pay Range: $24 - $26 per hour Shift: 2nd shift, 5:00 PM - 1:30 AM (overtime and weekends required) Training: 1-month training on the first shift (5:00 AM - 1:30 PM) Please send your resume to me at ************************. Thank you! 26.00

Reading and interpreting blue prints Preparing metal Setting up equipment Inspecting welds for quality Maintaining safety standards