Staff Engineer Jobs in Westland, MI

Job Responsibilities Lead, plan and execute engine performance and emissions development programs with guidance from a Sr. Engineer Conducting a detailed thermodynamic analysis of engine performance and emissions test results, prepare technical reports, papers and presentations based on those results P-V diagram analysis for combustion burn rates, mean effective pressure determination, etc. Heat transfer analysis for emissions aftertreatment light off assessment, coolant system heat rejection, etc. Emissions aftertreatment system performance and efficiency analysis using regulated certification drive cycles Concisely summarize test results and data to a reportable format, make recommendations / direct future test plans based on information in these reports Support engine dynamometer test cells with work instructions and test plans that can be used by the technicians to properly set up and execute the scope of a given engine test project Ensure that the test equipment used during each engine test program that he / she is involved with is properly calibrated, meets customer accuracy and repeatability requirements Analyze gasoline and diesel engine performance and emissions technology trends and market demand to plan projects and understand customer requirements that will drive future business Lead and participate in department continuous improvement activities, including process improvement, efficiency improvement and development of data analysis techniques Train and mentor junior engineers / interns on department processes and required technical skills to assist in their career development Collaborate with department manager and / or program management staff to determine engineering feasibility, cost, and timing for engine development quotes Assist with quoting activities for customer requests involving gasoline, diesel or electrified powertrain development testing Maintain a working knowledge of new engine testing technologies that may improve testing operations and increase department efficiency Communicate effectively with project management staff to ensure that project budget, timing and quality requirements of his / her portion of the program scope are being satisfied Prepare project reports, in Microsoft Powerpoint or Word format, for management, clients or potential clients Employees duties are not limited to those stated above, but are inclusive of any tasks assigned by supervisor / manager Job Qualifications Bachelor's degree in mechanical, automotive, or equivalent engineering field is required. Master's in mechanical, automotive, or equivalent engineering field is a plus Two or more years of related experience In depth knowledge of internal combustion engines and testing techniques Work effectively with a variety of people such as; management, design, calibration and technical staff, as well as customers and supplier representatives Ability to recognize new business opportunities Logical and methodical approach to tasks Strong Microsoft Office skills Presentation & public speaking skills Familiarity with industry standard calibration tools preferable (ATI Vision, ETAS Inca, ETAS ASCMO) Experience with advanced plotting packages preferable (Uniplot, MDA, Concerto) Experience with both gasoline and diesel engines Reliance One, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Looking to work for a leading robotics integrator offering unique solutions to multiple industries? Open to learning new things & developing high-performance products? Do you want to be at the forefront of engineering in a business always looking for ways to improve its products & offering to customers? We're looking for a Mechanical Design Engineer who enjoys working in a team to work on custom assembly projects building processes from concept to installation. What you'll do: Creating & maintaining technical documentation. Working on prototyping, trouble shooting & design improvements. Work closely with customers to interpret requirements into design. Collaborate with cross-functional teams to conceptualize, design, and develop mechanical systems, components, and products. Design using Solidworks to create detailed 3D models and engineering drawings for manufacturing. Layout full systems in 2D AutoCAD Optimize designs for performance, manufacturability, and cost-effectiveness while considering regulatory and safety requirements. What you'll need: A background in machinery or tooling. Experience in automation. Experience with a 3D & 2D CAD software (Solidworks or Inventor) Great communication & background in collaborating with a cross-functional team. Working knowledge of FEA. Experience with GD&T.

My name is Amber Zander, a Recruiting Specialist with SCN (***************** We are partnering with a Fire Protection Company who is hiring for a Mechanical Engineer - Fire Protection Systems. Company Highlights Leading provider of industrial fire protection solutions Specializes in designing and implementing fire protection systems for large-scale industrial facilities Works with heavy-duty industrial plants to ensure safety and compliance Provides innovative engineering solutions for fire protection and piping systems Position Highlights Title: Mechanical Engineer - Fire Protection Systems Full Time Direct Hire 100% On-Site - Troy, MI Background Requirements Bachelor's degree in Mechanical Engineering (BSME) required Minimum 5 years of experience in industrial fire protection system design (commercial or apartment building experience will not be considered) Professional Engineer (PE) license preferred NICET certification preferred Strong understanding of mechanical systems in heavy-duty industrial plants Job Responsibilities Design industrial fire protection systems, including chilled water piping, hot water piping, compressed air piping, and gas piping Perform proper sizing, design, and layout of systems, including all valves, chillers, and pumps Ensure compliance with industry standards and client specifications Collaborate with cross-functional teams, contractors, and clients to deliver high-quality solutions Utilize engineering software and tools for system modeling and design What is Being Offered Challenge: Work on large-scale industrial fire protection projects with a leading company Location: Troy, MI (100% on-site) Advancement: Opportunity to grow within a specialized industrial engineering environment People / Culture: Collaborative and technically driven work environment Stability: Established company with a strong industry presence If you are interested and qualified, please send your updated resume as an MS Word document, along with details on how you fit this specific position, to ************************. Thank you for your consideration!

Our client is seeking a Senior C++ Engineer to work on their unannounced title. The ideal candidate is well versed in C++, has shipped titles in the past and is passionate about strategy games. Primary Responsibilities Include: Architect, build, and maintain core systems in modern C++ on multicore CPUs Write technical documents describing core systems Mentor and collaborate with other developers in a team environment Work cross functionally with Design, Product, and Art to develop requirements and implementation plans Manage timelines and milestones to meet stakeholder expectations Education and/or Experience Desired: Bachelor's Degree in Computer Science, Engineering, Mathematics or equivalent work experience. Very strong C++ background. 7+ years experience in game or simulation development Expertise in several of the following; Optimization, Networking, UI/UX, AI, Generative AI, Physics, Data Management, Graphics, Gameplay, Audio, HLSL/GLSL Shaders, Pipelines, Terrain

Long Term Contract (Possible Extension) Title: 1399603 - Development Engineer (Gearbox / Transmission) The Development Engineer is responsible for but not limited to: Development and validation of electric vehicle propulsion systems Gearbox (transmission) for passenger cars and trucks. The Engineer will develop efficient and cost-effective electric propulsion systems using cutting edge technologies, the latest test and evaluation equipment/laboratory, and robust simulation tools. Develop electric propulsion system (Gearbox / Transmission) DVP&R. Define and carry out all required development/validation testing to ensure achievement of all functional objectives and assure compliance to program goals. Participate in supplier assessments and post-test inspection reviews, including detailed failure analysis. Work closely with the chosen suppliers and manufacturing entities to ensure designs are robust to customer requirements, meet exact function, and are manufactural without defect. Tests finished product for quality purposes and recommends changes to product specifications as necessary. The Development Engineer will define and carry out all required bench development/ validation testing to ensure achievement of all functional objectives and assure compliance to program goals. Requirements: Minimum of 2 year's experience in propulsion system design and/or development. Demonstrable understanding of propulsion systems and devices (Gearbox, transmission, axle) -DVP&R and DFMEA creation & execution experience. Good analytical and problem-solving skills. Understanding of Engineering standards/protocols, and of electric propulsion system devices -Highly motivated and self-starter. Demonstrated ability to work in a team environment Driving a Client vehicle is required Preferred Requirements: Master of Science in Mechanical or Electrical Engineering. 2-5 years of experience. Propulsion systems (gearbox and transmission) models, simulation experience, and FEA. Propulsion system specifications expertise -Gearbox & powertrain controls experience. Design and release experience. Experienced with supplier program management. Education: Bachelor of Science in Mechanical or Electrical Engineering.

An international custom assembly line solutions company is currently seeking an experienced Factory Automation Design Engineer to join their facility in the Rochester Hills, Michigan area. The ideal candidate has 3-5 years' experience with custom assembly/production line design. This is a full-time and direct hire position. Factory Automation Design Engineer Responsibilities Include: Design and development of the whole material handling robotics/factory automation lines for customers Communicate with clients to understand the all the requirement including quality Develop and maintain engineering drawings, schematics, and Bill of Materials and budgeting Create records of design changes and project updates for internal and customer use Communicate and collaborate with mechanical engineering manager to create a concept Work with various department (Project Manager, Controls Engineering, manufacturing) until customer's approval of the design Participate in meetings regarding projects with internal departments and outside customers Assist management in design department process improvement and performance analysis Other duties as assigned Factory Automation Design Engineer Requirements Include: Bachelor's degree in a Mechanical Engineering, Industrial Engineering, or related field preferred Minimum 3-5 years' design experience in custom robotics/machineries/assembly line Ability to read, interpret, and improve engineering drawings and schematics Ability to do electrical and pneumatic drawings Strong communication and collaboration ability in a multicultural environment Strong problem-solving ability and willingness to collaborate with other colleagues and departments This position includes manufacturing and office work environment. While performing the duties of this job you may be required to intermittently sit, stand, walk, lift up to 25 pounds, lift in excess of 25 pounds with a lift assist, climb stairs, use hands to handle or feel parts/equipment, reach with hands and arms, stoop, kneel, crouch, bend at the waist, talk and hear. You may also be required to use close vision, distance vision, color vision, depth perception, and peripheral vision. ************************************************************************* Activ8 Recruitment & Solutions / Renaissance Resources Inc. has been a trusted leader in North American recruiting for Japanese businesses for over 25 years. We specialize in connecting top talent with companies in the Automotive, Electronics, Food & Beverage, Logistics, Manufacturing, Oil & Gas, Banking & Finance, and Entertainment industries. Our client-focused approach ensures that we understand your unique needs, whether you're a company seeking skilled professionals or a candidate looking for the right career opportunity. By working closely with each individual, we provide tailored solutions that drive success. We screen ALL Candidates to verify the validity of each applicant's provided information. Upon submitting your resume, we will contact only those candidates that we deem qualified for our client. If we do not contact you, we do not see the fit for the position. If we are unable to reach you in a reasonable timeframe, you will be eliminated from the pool of potential candidates. All offers of employment may be contingent upon successful completion of a background check in compliance with applicable laws. We prioritize direct applicants; third-party resumes may not be reviewed.

The Project Engineer will collaborate with civil engineers, land planners, landscape architects, and CAD designers to design various types of land development projects. Essential Functions Civil design for residential, commercial, and municipal projects Perform construction permitting for soil erosion/sedimentation control, NPDES stormwater discharge, sanitary sewer, watermain, MDEQ wetland/floodplain, and MDOT commercial driveway AutoCAD Civil 3D drafting Participate in site visits, agency meetings, and municipal meetings as needed Communicate effectively with team members and clients Essential Skills for Performing the Job Self-motivated Detail-oriented Problem-solving Effective written and verbal communication Required Education and Experience Bachelors of Science in Civil Engineering AutoCAD Civil 3D 5 + years of experience in private land development civil engineering design Professional Engineer Licensure or ability to obtain within 2 years Position Type/Expected Hours This is a full-time position. Some flexibility in hours is permitted, but s/he must be available during the standard work hours of 8:00 AM to 5:00 PM. Physical Demands This position is a combination of sedentary work, with some field and travel-related work. An employee is regularly required to stand, sit, walk, reach, type, talk, hear, balance, stoop, kneel, crouch, crawl, climb, push, pull, carry, and lift. An employee may also be required to drive, traverse wooded and/or uneven terrain, enter structures, use ladders, walk on roofs, enter small spaces, and work in various weather conditions. Travel Occasional travel will be required as a part of the Project Engineer role. Disclaimer Please note this position description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities are subject to change. Eligible candidates will be legally authorized to work in the United States without employment visa sponsorship. Nederveld Inc. is an Equal Opportunity Employer.

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion. Responsibilities Read and know the contract documents and specifications thoroughly, noting errors, omissions, conflicts, or need for additional information. Assist superintendent to ensure the quality of installation is in accordance with the project's plans and specifications and BCG Policies and Procedures. Prepare preparatory checklist for all definable features of work. Assist Superintendent with the RFI Process, which may include the following; communication with subcontractor, superintendent, owner, architect including distribution of RFI's and creation and maintenance of RFI Log. Assist Superintendent in timely resolution of engineering conflicts. Assist superintendent, if necessary, with maintenance and distribution of project schedule. Assist PM in procurement/buy-out process, as requested, including writing and/or reviewing detailed project scopes. Create, maintain and distribute control logs for contract documents, i.e. plans, specifications, bulletins, CCD's, PR's, etc. Coordinate the material procurement process including creation and maintenance of MSR (Material Status Report) Log. Maintain constant communication with superintendent and project manager relative to coordination of materials fabrication and arrival on site. Develop, administer, monitor, and maintain a detailed Shop Drawing and Material Status report which is saved to the "Q" drive as changes occur and includes receipt/distribution of submittals, shop drawings, samples, calculations, etc. ROJ dates shall be developed in conjunction with Superintendent and project schedule. Coordinate material/subcontractor deliveries in accordance with project schedule, and notify Project Manger of any issues. Assist PM in documenting project meetings through meeting minute format - provide distribution to all parties Assist PM with cost control functions, i.e. pricing of additional work through bulletins, direct owner requests, etc. Request, receive, log in and validate subcontractor quotes, submit to PM for review prior to the assembly of change request documentation. Participate in developing and maintaining a fair and just working relationship with with the Owner's, Architect, Engineer, Consultants, AHJ, etc. which will result in both project specific success and long-term benefit. Administer close-out procedure from start to finish with assistance from project manager, project coordinator and superintendent. Process includes close-out log, assembling and packaging of maintenance manuals, as-built drawings, warranties, and other documents in fashion acceptable to owner/architect, as well as coordination with subcontractor and superintendent for commissioning/training as required. Responsible for tracking of attic stock materials through subcontractor and superintendent. Assist superintendent with the Punch List process as required. Communicate non-compliant subcontractors with project manager and accounting in order to withhold money until subcontractor is compliant. Perform additional assignments per Project Manager's direction. Maintain professionalism during work hours in support of Braun Construction Group's image. Actively market Braun Construction Group services to potential clients. Communicate potential leads to business development manager and project executive. Provide subcontractor evaluations to Vice President Operations and Estimating. Qualifications Bachelor's degree in Construction Management, Mechanical or Industrial Engineering or equivalent experience preferred 1 - 3 years' of experience as a project coordinator, project engineer, or project manager Strong experience in AutoCad and Microsoft Office Suite Familiarity with rules, regulations, best practices and performance standards

As a Tier 1 supplier, our company works closely with global automotive OEMs, requiring expertise in hardware design, regulatory compliance, industry certifications, and customer collaboration. The ideal candidate will have experience in automotive ECU (Electronic Control Unit) integration, vehicle network interfaces (LIN, CAN, Ethernet), and USB communication with in-vehicle systems such as the Head Unit and infotainment system. This role requires close collaboration with OEM customers, internal teams, and the headquarters' R&D department to ensure seamless product development, validation, and mass production. Responsibilities Develop and optimize wireless charging and USB charging/data modules for automotive applications. Conduct circuit design, PCB layout reviews, and system integration to meet automotive standards. Analyze and validate ICs (MCUs, PMICs, wireless charging controllers, USB controllers, etc.) and other key components. Review and analyze BOM (Bill of Materials) to ensure component selection aligns with OEM requirements, cost efficiency, and automotive quality standards. Ensure designs comply with functional safety (ISO 26262), electromagnetic compatibility (EMC/ESD), and thermal management best practices. Integrate USB modules with vehicle ECUs, such as the Head Unit and infotainment system, ensuring seamless communication and power management. Understand and implement automotive communication protocols (LIN, CAN, Ethernet) for USB module connectivity. Ensure compliance with Qi (Wireless Power Consortium), USB-IF, and automotive EMC/ESD standards. Support and manage regulatory certification processes to meet OEM and industry requirements. Ensure adherence to AEC-Q100/Q200, ISO 26262, RoHS, REACH, and other automotive regulations. Investigate and resolve hardware-related issues during development, validation, and mass production. Conduct failure analysis (FA) and implement corrective actions in collaboration with the quality team. Utilize oscilloscopes, spectrum analyzers, and other debugging tools to diagnose and resolve issues. Work with automotive network debugging tools to analyze and troubleshoot LIN, CAN, and Ethernet communication issues. Debug USB communication and power issues related to interaction with vehicle ECUs (Head Unit, infotainment system, etc.) Act as the technical interface between our company (Tier 1) and OEM customers, ensuring their requirements are met. Provide technical support for OEMs during design reviews, testing, and validation phases. Respond to customer inquiries and work on design modifications based on OEM feedback and specifications. Support on-site and remote troubleshooting of hardware-related issues reported by OEMs. Work closely with headquarters' R&D teams to align development efforts and resolve technical challenges. Collaborate with software, mechanical, validation, and quality teams to ensure system-level optimization. Support manufacturing teams by resolving production-related hardware issues and improving yield. Requirements Bachelor's or Master's degree in Electrical Engineering, Electronics, or a related field. 5+ years of experience in hardware development for automotive or consumer electronics. Bilingual in Korean and English is required Strong knowledge of IC selection, passive/active components, and BOM analysis. Expertise in wireless charging (Qi), USB charging/data protocols (USB-PD, USB 3.x), and power electronics. Experience working with automotive OEMs and understanding their validation and approval processes. Familiarity with automotive EMC/ESD standards, AEC-Q100/Q200, ISO 26262 (Functional Safety), and PCB design tools (Altium, OrCAD, etc.). Experience in automotive ECU integration, particularly with Head Units and infotainment systems. Knowledge and experience with automotive network interfaces (LIN, CAN, Ethernet) for USB and charging module communication. Experience working with regulatory bodies and certification processes Ability to troubleshoot and analyze hardware issues effectively. Strong communication and collaboration skills, with experience in customer-facing roles. Hands-on experience with automotive network analysis tools (e.g., CANoe, CANalyzer, Wireshark for automotive Ethernet).

The wheel engineer is responsible for the development of the wheel diversity and allocation across a new model project, and all variants requiring unique wheels. This engineer works directly with the studio on new wheel style and concept designs. The engineer determines the appropriate wheel offset, pilot bores, wheel mounting face and bolt pattern, rim flange design, TRA/ETRTO compatibility, structural integrity via FEA analysis, bearing package, wheel brake package. The result is a wheel design which meets the design and integrity of the product specification and is feasible to manufacture. The engineer works directly with studio designers, studio CAE engineers, and chassis designers. Interface with chassis brake and driveline engineers, as well as CCLP project team. The resulting wheel designs are then forwarded to the execution team (wheel release engineers) to prepare sourcing documents for business placement, then proceeds with final wheel design and development and testing for validation. Requirements: ***Onsite 4-5 days per week*** Bachelor of Science Degree in Mechanical Engineering 3 years wheel engineering design and development experience Demonstration of automobile interest (automobile hobby, college project) Demonstration of passion to work in the automotive industry.

Our client is looking for a Lighting Design Engineer to create lighting systems for various environments, optimizing visibility, energy efficiency, and ambiance, while ensuring compliance with safety standards and regulatory requirements. Diverse projects. Drive to Innovate. Collaborative team. Employee Owned. Work-Life Balance. Full-time positions also offer competitive salary and benefits, 401K with employer match, discretionary bonuses, vacation and sick time, and a hybrid work arrangement.??? Responsibilities Designing energy efficient lighting and control systems Performing photometric and energy usage calculations including ComCheck reports Ensuring designs comply with local codes, national standards (NEC, NFPA, etc.), and client specifications Developing lighting plans with circuiting and controls, photometric plans, and fixture schedules Developing illuminance and control schedules complying with codes and user requirements Developing generic and project specific control wiring diagrams Developing lighting system studies and reports Assisting in gathering and evaluating information for engineering studies Collaborating with architects, mechanical engineers, and other technical disciplines to integrate lighting and control systems into building designs Incorporating sustainable design practices to support LEED, WELL, or other green building certifications Reviewing shop drawings, RFIs, and submittals to ensure construction accuracy Meeting with clients to understand their needs and propose lighting and control system solutions Presenting technical concepts in a clear and compelling manner to both technical and non-technical stakeholders Guiding junior engineers and reviewing their work to ensure accuracy and adherence to standards Staying up to date with industry trends, new codes, and emerging technologies to enhance firm capabilities Some travel may be required Qualifications Minimum bachelor's degree in electrical engineering, lighting design, or related field 5-7 years of relevant lighting design experience in the A/E industry NCQLP LC Certification Working knowledge of ASRHRAE 90.1, Chapter 9 and IES Lighting Library Standards Proficiency in Revit and Microsoft Office programs Experience with lighting software, preferably Visual Lighting; proficiency with comparable software (i.e.,AGi32) is acceptable Strong oral and written communication skills Professional demeanor and understanding of workplace conduct

Detroit - Full Time My client is looking for a Body Design Engineer to contribute to a high-profile project with a multi-billion-dollar OEM. As a Body Design Engineer you will play a crucial role in developing the closures components of vehicles, ensuring they are functional, aesthetically pleasing, and meet safety standards. Roles & Responsibilities • Assist with new program development by influencing design, provide tooling estimates, provide material suggestions, participate in risk analysis, help to coordinate drawings, be able to analyze and provide suggestions regarding cost reduction and quality improvement opportunities. • In-depth knowledge of NVH and Closure materials, and component manufacturing processes • Perform feasibility checks with respect to material, manufacturing & design perspective • The candidate will work with complete cross functional vehicle development team to define functional requirements, develop component and system DVPR, DFMEA, and releasing system and component performance specifications. • Releases final designs for manufacturing into Team Center Qualifications • Excellent understanding of GD&T standards • Proficiency with Catia v5, including drawing and modelling practices and methodologies • Hands-on experience building and launching automotive products. • Experience with Microsoft Office applications and other information management tools • Strong written and verbal communication skills • Experience using project management tools • An eagerness to work cross-functionally in a dynamic environment where you are part of a high performing team • A system approach to design and development with the desire and curiosity to strive for exceptional delivery execution and continuous improvement Who is Techfueld? Techfueld is a specialist search firm focused solely within E-mobility & Vehicle Technology recruitment. We offer retained, contingent and project/team builds for automotive suppliers and car manufacturers across Europe, North America, and APAC regions. All conversations are held confidentially, and your information is only forwarded to any of our clients, should you wish to proceed. To find out more information, please visit *****************

Our client, a precision gear manufacturer, is seeking an experienced Applications Engineer/Estimator. The main role of the Application Engineer is to deliver precise pricing details for the design and manufacturing of industrial gears. When a project request is received, the Application Engineer/Estimator will examine and assess all data provided by the customer, including technical and design specifications essential for project completion. They will accurately calculate the costs of raw materials, engineering, manufacturing, logistics, and any other expenses required to fulfill the project according to specifications and offer the customer a precise quote. Primary Responsibilities: Selection, pricing, quoting, and proposals tailored for customers Help customers with product drawings Review specifications Provide support for sales and marketing strategies Assist in creating marketing materials Act as a technical expert to support the sales team Offer technical support to the factory, sales team, and customers Aid in on-site problem investigations Process orders in the current ERP system Qualifications and Experience: B.S. in Mechanical Engineering or B.S.M.E.T or equivalent work experience 3 to 5 years of Mechanical Engineering experience in a related field is required; 1+ years in industrial gear market is beneficial. Experience in the mechanical drive/power transmission industry preferred. Flexible to changing requirements and able to technically adapt, able to multi-task, good communicator, professional and positive Team player, good problem solving skills, and self motivated Creative, adaptive, and assertive Knowledge of large industrial gear drive applications and competitors High level of organization Project management skills Technical sales skills

Responsibilities: Work with our Sr. Mechanical Engineers to complete calculations, drawings, and specifications. Coordinate with our multi-disciplined office to provide technical design support and prepare design / construction documents in accordance with project expectations. Support project team. Assist other teams as required to meet project goals and timelines. Conduct site visits for verification of facilities as required. Mechanical Experience Desired: HVAC Systems Facility Process Engineering Chilled Water System Hot Water System Energy Study Utilization Fire Protection Qualifications: Bachelor's degree in Mechanical Engineering. Experience in AutoCAD and REVIT. Knowledge of industry standard software. Excellent written and verbal communication skills. Creative, detail oriented, self-motivated. Ability to multi-task. Willingness to work with all facets of our team.

The Application Engineer (AE) will be the point of contact for our customers when dealing with all engineering issues and concerns related to their assigned projects. The candidate's goal is to obtain new business awards and grow the business for Resonac America, Inc. This shall be done by successfully completing the customer's expectations regarding the screening of friction material candidates for their applications. This position is responsible for coordinating prototyping, testing, analyzing data and reporting to internal and external stakeholders. The Application Engineer will have effective communication skills as an integral part of the team. The candidate is also expected to manage existing projects with engineering issues in order to maintain business already achieved. Responsibilities Comprehend customer's technical requirements and find effective solutions with our team members Understand the Resonac and Japan Brake manufacturing process for brake products Issue and maintain timelines and open issues for responsible projects Issue and maintain a Design Verification Plans & Reports (DVPR) for responsible projects Issue and maintain product specifications according to the DVPR & customer requirements Support the Prototype department when needed Organize prototype samples and testing for responsible projects Participate in internal & external testing for responsible projects Manage testing to complete product validation Summarize data for sample physical properties, brake characteristics tested, etc. and report to the Manager. Make presentations to customers detailing the above activities & test results Interface with all departments to ensure customer satisfaction Register and complete IMDS for responsible projects Conduct root cause analysis in new and existing projects Provide status reports for responsible projects to management Identify and understand future technical trends and requirements Qualifications Knowledge of passenger car & light truck hydraulic brake systems. Knowledge and skills of friction material manufacturing methods and pad quality inspections. Knowledge of friction material testing procedures, brake characteristics and requirements. Strong problem solving and decision making skills required. Able to organize and implement a design verification plan and report (DVP&R). Proficient use of word processing, spreadsheet and presentation software. Able to manage complex open issues and timelines with accuracy and organization. Ability to use design software a plus. Strong communication skills within international organizations Education and Experience: Bachelor's degree in chemical or mechanical engineering (or similar). 2-4 years of experience in the automotive brake industry preferred. Position Type & Expected hours of work: Full Time. 35 hours per week. Work Environment: This job requires working in different environments. Those environments include working in a typical office environment, working in the prototype, the quality and the test labs, traveling to visit customers, suppliers and equipment manufacturers, walking around during factory visits, and observing testing at vehicle test tracks. Physical Demands This job requires a minimal amount of physical lifting. At most, the applicant will be expected to lift 30-40 lb. boxes containing automotive brake parts for short amounts of time. Affirmative action plan/equal employer opportunity (AAP/EEO) statement: Resonac provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Resonac America complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Title: Systems Engineer 4 (Embedded cybersecurity systems) Duration: Contract Notes: W2 only, NO CTC, NO work visa sponsorship Responsibilities: • Collaborate with cross-functional teams to consolidate detailed requirements and architecture specifications for the next-generation vehicle and infrastructure security solutions. • Define the success criteria and priorities of the project/product benefits and arrive at executable roadmaps. • Ensure complete requirements and architecture traceability and compliance with industry standards. • Collaborate closely with the Verification and Development engineers to establish product excellence. The teams span internal and external teams, including suppliers and partners. • Ensure optimization of software through design reviews and code reviews. • Collaborate with different teams, including Supply Chain, Tier-1 teams, Vehicle Controls, Chassis, Safety, Battery, Infotainment, and UX, to realize the overall project objectives on time and within budget. • Approach challenges/problems laterally across the systems and domains and vertically drill down to subsystems and elements involved and reconcile gaps and contradictions. • Follow through and follow diligently to unblock the issues. • Regularly communicate vision, features, priorities, deliverables, and goals to our stakeholders via program documentation, launch announcements, release notes, brown bags, seminars, and user training. • Author Security-related RFPs, RFQs, and SoWs spanning in-vehicle and vehicle-to-infrastructure secure communications, secure ECU software/firmware updates, penetration testing, threat analysis and risk assessment (TARA), fleet data protection & privacy aspects, and evaluate suppliers Required Qualifications: • 6+ years of industry experience in technical architects' roles and technical product management in network and information security, data privacy, and cybersecurity. • Conversant with embedded security spanning secure software and firmware update, secure boot, secure storage, and trusted execution environment and hardware security modules and security hardware extensions. • Experience in threat analysis and risk assessment (TARA) at the system level and component level • Experience in Scalable Public Key Infrastructure Deployments and management • Experience in Vulnerabilities in-vehicle connectivity interfaces and protocols, e.g., CAN, BLE, Wi-Fi, GNSS, mitigation mechanisms, and security enforcement. • Experience using requirement management systems like JAMA, JIRA, Confluence, or similar tools. Preferred Qualifications • Experienced in the emerging security standards/frameworks, including ISO/SAE 21434, UNCE WP.29 cybersecurity, and cybersecurity management systems regulations regarding connected vehicles • Knowledge and experience of Road Vehicle Fleet Security Operations and intrusion detection and prevention systems will be a plus. • V2X adoption and security enforcement will be a plus • Knowledge and experience of Model-based systems design is a plus About Maxonic: Since 2002 Maxonic has been at the forefront of connecting candidate strengths to client challenges. Our award winning, dedicated team of recruiting professionals are specialized by technology, are great listeners, and will seek to find a position that meets the long-term career needs of our candidates. We take pride in the over 10,000 candidates that we have placed, and the repeat business that we earn from our satisfied clients. Interested in Applying? Please apply with your most current resume. Feel free to contact Nina Schindler (**************** / ************* for more details.

Responsibilities to Anticipate/Expect: Provides technical direction to MBSE Systems and Software Engineers for the execution of engineering projects within a SysML model using the Cameo Enterprise Architecture tool. Coordinate with program office personnel in the development of proposals, scopes of work, program plans, statements of work, and work breakdown structures concerning the role of MBSE on the program to help define the program. Define “how” Engineering will execute all aspects of the System Engineering using MBSE to include the development and review of requirements, requirements flow down, system architecture, opportunity and risk management, trade studies, technical performance measures, testing, interface control, cost control, weight management, technical program review preparation, system integration, verification, and validation. Prepare appropriate plans to capture these activities which includes ownership and responsibility of MBSE staged elements Support the SEM, SEIT Lead, and Chief Engineer in their role to Define and Review the Technical Product solution that resides in the MBSE Define, Develop, and Manage the MBSE elements of a program into a defined SysML configuration. Areas include staging Requirements, Behavior, Structure, Interfaces, and Parametric elements in an MBSE tool for a program. Guide the program team using the MBSE model in the development of requirement decomposition for Functional and Non-functional requirements from the System Specification to the allocated baseline of HWCI and SW CSCI requirements. Guide the program in the use of MBSE structures for functional decomposition from System Functions to component functions. Establish the structure and staging in the model for building and linking SysML artifacts in the generation of Activity Diagrams, State Machines, Sequence Diagrams, Block Definition Diagrams (BDDs), Internal Block Diagrams (IBDs) and their associated derived requirements. Guide the program team in the development of MBSE interfaces and the generation of proper Data Architecture Model Libraries (DAML) and Domain Specific Data Models (DSDM) according to the Ground Combat System (GCS) Common Infrastructure Architecture (GCIA) models and documentation. Build and maintain MBSE-based metrics for the programs' TPMs, Trades, Risks, and Design Decision Memorandums (DDMs). Provide program metrics on the maturation of the MBSE environment in compliance with the contract, program requirements, and GCIA implementation. Define and Stage the MBSE for consumption of program CDRLs into the SysML model as required by the contract to digitize the engineering environment. Support the Digital Engineering (DE) initiative of digitally connecting tools such as Teamcenter, Cameo, MADe, Capital Harness, SLICWave, etc. to provide a seamless integrated environment that supports a single Source of Truth initiative for all engineering products. Develop Style Guides for each area of the MBSE. I am responsible for other duties as assigned. Minimum Qualifications / What you must have · Bachelor's Degree in an Engineering Discipline. Similar technical degrees may be considered if experience aligns with this job function. · Minimum of 10+years of related engineering experience. · Strong Vehicle System engineering experience required. · Proficient in Microsoft Office Suite. Must have Cameo experience

Yinlun TDI, LLC is a top leader in providing thermal management solutions to the US Automotive, Commercial Truck and Off Highway markets. We are a group of highly motivated professionals who focus on providing heat exchangers, modules, systems that meet the ever-increasing demands from our customers. Headquartered in Houston, TX, Yinlun TDI, LLC maintains sales and engineering facilities in Michigan, Illinois, and North Carolina. In addition, we have several manufacturing operations facilities in Mexico. YINLUN TDI LLC is an ISO 9001, ISO 14001 and IATF 16949 certified company manufacturing heat exchanger and fluid cooling components for the automotive, commercial vehicle markets. Due to tremendous growth, we currently have an opening for the position of Application Engineer. Job Title: Application Engineer - HVAC /Cooling Module Job Type: Full time Location: Detroit, MI Brief Summary of Position The responsibilities of this individual are to provide technical lead in automotive new program acquisitions, existing program development activities, and act as liaison between customers and Yinlun HQ China. You will collaborate with our engineering team to develop new applications and improve upon existing ones that will serve our clients and business well. Must be able to objectively analyze application performance and effectively implement necessary changes. Job Duties and Responsibilities Function as the primary technical interface to customers, explore potential opportunities, and take lead of new business acquisition activities. Visit customers frequently to obtain the latest developments of customers and competitors. Identify customer specific needs, preferences, and gain constructive feedback. Investigate and collect customer and competitor information, monitor the market performance of competitors' related products in the field of use and the OEM side, and make suggestions for the company to make market decisions. Develop & promote existing & new products for business acquisition with technical presentation. Understand and interpret customers' RFQ requirements and prepare technical solutions to meet customer requirements for packaging and performance. Analyze and compile customer's technical requirements and specifications to extract performance and functional criteria. Provide customer engineering estimates and a high-level technical explanation on the quote, manage all technical aspects of RFQ responses. Facilitate 3D and 2D models' development balancing the customer requirements and internal performance standards, and new concept development with customer and internal design team by conducting feasibility study. Support customer design change ideas & cost reduction plan; Effectively collaborate with customers on engineering change process and lead internal implementations. Resolve customer in/postproduction issues by investigating problems, developing solutions, preparing reports, and making recommendations to the management. Coordinate project activities with customers and internal teams for program timing/delivery, industrialization, APQP process (DVP&R, DFMEA). Implement pre-sale, in-sale and after-sale customer service, and handle customer complaints in a timely manner according to procedures. Qualifications Bachelor's degree in engineering (Mechanical, Industrial, Aerospace) required. Minimum of 3 years' experience in automotive heat exchangers/cooling system development. Experience with EV vehicle thermal system, battery cooling, HVAC/heat pump system a plus Experience in any of the following manufacturing methods a plus: plastic injection molding, aluminum casting, CAB brazing, stamping. CAD design experience (Catia V5, UG/NX, Solid works, Pro/E or Creo) a plus Familiar with APQP process, 8D reporting, FMEA, DVP&R, and program management. Ability to handle multiple projects, complete tasks on-time, and ability to work effectively in cross-functional teams. Strong sense of responsibility, dedication, clear thinking, excellent analytical and problem-solving skills, good interpersonal communication, organization and coordination skills, and team spirit. Work location: Detroit, MI Language: Bilingual language a plus, Chinese and/or Spanish Travel: international travel to China, Mexico

Are you looking to work for a company that provides an innovative work environment, and your voice is heard? We have multiple needs for Powertrain Project Engineers that have a focus on engine and hybrid systems. These roles are in Chelsea and Auburn Hills. Ideally, we are looking for candidates that have past Stellantis experience. As a Project Engineer specializing in the development of both conventional and hybrid powertrains, you will be responsible for leading the calibration and validation of base engine controls, aftertreatment controls, hybrid controls or on-board diagnostic (OBD) systems. Additionally, you will be responsible for general engine and hybrid powertrain development work and testing as well as validation and certification activities performed on chassis and engine dynos as well as in-vehicle/machine in the application environment. Working with highly motivated individuals from across the globe on a variety of engines, vehicles and markets, the Sr. Project Engineer will be able to increase their scope of experience with technology used across the globe. This Sr. Project Engineer position requires a highly motivated individual with an eagerness to learn and make a positive contribution. This position will work onsite at our client located in Auburn Hills, MI or Chelsea, MI. Job Responsibilities: Lead the installation and commissioning of new powertrain test setups, including conventional combustion engine and hybrid configurations. Identification and implementation of necessary connections, measurement points and instrumentation to support testing efforts. Plan, coordinate and execute the testing of engines, aftertreatment systems, powertrain systems and OBD systems on engine/chassis dynamometer or in application. Analysis of measured parameters and system performance relative to project targets. Calibration and validation of electronic control unit parameters to satisfy program objectives. Summarize findings and prepare presentations/reports for internal and customer review. Manage customer hardware and project component inventory and logistics. May involve work onsite at customer facilities, vehicle test trips to support ongoing development programs. Required Qualifications: Bachelor's degree in Mechanical/Automotive Engineering, Electrical/Electronics Engineering or related field, Masters preferred 3+ years of experience in engine, vehicle and/or powertrain testing Strong fundamentals in thermodynamics, fluid mechanics and internal combustion engines Strong knowledge of SI and CI combustion processes Strong knowledge of aftertreatment systems Experience in calibration of base emissions control strategies to fulfill customer and regulatory requirements or experience in calibration and implementation of OBD strategies meeting CARB regulations Understanding of base engine, aftertreatment and/or hybrid electronic control system strategies, knowledge on software logic implementation and control system functionality Experience using commercially available calibration and development tools (i.e., ETAS INCA, ATI Vision, Vector CANape/CANalyzer, Matlab/Simulink) Professional communication skills (oral and written English) Must be a motivated team player to perform in fast paced development environment Preferred Qualifications: Knowledge of hybrid powertrain systems Knowledge of control strategies employed on Bosch and/or GPEC controllers Strong understanding of US emission regulations and certification test procedures for Gas, Diesel and/or Hybrid systems Understanding of US OBD regulations and monitoring approaches Hands-on experience with engine hardware - engine assembly or rebuilding US citizen or Permanent Residence a plus What you'll get: Healthcare (Medical/Dental/Vision) 401(k) Program w/ company match Life Insurance and Disability Paid Holidays Vacation Time