Senior Mechanical Engineer Jobs in Baltimore, MD

PTS Advance is seeking a Senior Mechanical HVAC Engineer who is experienced in industrial utilities and HVAC design to join our Energy, Manufacturing, and Bioprocessing partner. This full time, direct hire position, will be responsible for engineering, design, coordination, client communications and associated construction administration. This position will ideally be based in our Ellicott City (Baltimore), Maryland OR Richmond, VA office. Relocation would be considered. Salary Range: $120K - $170K (open for negotiation, considering qualified candidates) Job Description: This Engineer will work in a dynamic multi-discipline environment, accountable for the oversight of engineering deliverables, calculations, systems and equipment selection, mechanical design, mechanical engineering budget and schedule management, maintain professional relationships with vendors, customers, and other personnel as required by projects. The Engineer will work with other engineering and technical personnel to ensure overall project goals are met. Periodic travel to other offices or project site locations is required. Primary Duties and Responsibilities: Application of knowledge of utility and HVAC systems in industrial markets such as food & beverage, personal care, advanced technology, specialty chemicals, automotive, ship building, heavy manufacturing, power, and other industrial facilities/systems. Mechanical systems include, but are not limited to, building HVAC, industrial ventilation, dust collection, chillers, cooling towers, boilers, pumps, blowers, natural gas, steam & condensate, compressed air, process water, hygienic piping and equipment, and dry material handling equipment. Develop and manage all aspects of the mechanical design including system design, duct sizing, pipe sizing, equipment sizing and selection, and specifications with datasheets. Contribute to the preparation of construction documents including drawings, specifications, calculations and equipment datasheets. Confirm and review applicable codes and standards such as, but not limited to, the IBC, IMC, IPC, ASME, ASHRAE, API and NFPA. Perform heating and cooling load calculations utilizing software such as Trace. Perform head loss calculations utilizing software such as AFT Fathom/Arrow. Perform industrial ventilation system design in accordance with OSHA/ANSI standards and ACGIH best practices. Provide technical support during construction including problem solving for field oversights, review of vendor submittals, perform field inspections, and address RFIs Requirements: Bachelor's Degree in Mechanical Engineering from ABET accredited program required. 12 - 18+ years relevant industry experience. Experience leading teams of engineers and designers on design projects. Registered Professional Engineer (or ability to obtain your PE within the first year of employment in Virginia and/or Maryland.) Client projects for this position require US Citizenship. Recent HVAC design in industrial manufacturing facilities - MUST HAVE Desired Credentials and Skills: Significant experience with industrial utility and HVAC systems. Knowledge of Building Codes including Mechanical Code and Plumbing Code. Knowledge of ASHRAE, ACGIH and SMACNA Standards. Physical Requirements: Travel to project sites and corporate offices. Of which, a small percentage is overnight travel. The job requires the ability to visit industrial sites and construction sites for the intent of performing inspections and observations that may be physically demanding. These inspections and observations may be made at heights, in confined spaces, and may require the use of a respirator to perform the inspections. Meets expectations for attendance and punctuality. May be required to lift up to 20 lbs. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

$115,000 - $135,000 Job Opportunity: A well-established industrial company is seeking a Mechanical Engineer to join their team. This role offers a dynamic work environment with a strong focus on technical support, equipment improvement, and project management. Position Overview: Provide technical support and optimize production equipment. Conduct design work, manufacturing reports, and define project scopes. Support maintenance employees with technical expertise. Prepare budgets and coordinate with vendors. Work with process flow diagrams (PFD) and piping and instrumentation diagrams (P&ID). Operate within a 24-hour production facility. Candidate Requirements: Bachelor's degree in Mechanical or Chemical Engineering. 5-10 years of relevant experience (NOT including time on interns). Experience with tubing, piping, and tank equipment. Ability to work in both indoor and outdoor environments. Hardworking, dependable, and a strong team player with independent problem-solving skills. What We Offer: Competitive salary ($115,000 - $135,000) with potential relocation assistance. Full benefits package including health insurance, 401k match (6%), and performance-based bonuses. PTO: 2-4 weeks, plus sick leave and vacation rollover options. Strong training programs and career development opportunities.

SourceFactor's client is an MEP Design Engineering firm focused on existing commercial buildings - not new construction. They have a really interesting mix of energy efficiency and design projects, working with some of the largest building owners to bring their existing portfolios up to modern efficiency standards. They do this by thoroughly investigating and auditing the current environment, then identifying areas for improvement, including the design of new HVAC systems for large commercial facilities and related commissioning / RCx. This is an exciting opportunity for a mechanical engineer with 5 or more years of MEP design experience, who likes investigating and improving already existing infrastructure. For that reason, it won't be a fit for candidates who only work on new construction. Experience Requirements: BS in Mechanical Engineering Must have EIT, prefer PE At least 5 years of experience in the design and engineering of commercial HVAC systems Experience using design tools like AutoCAD or Revit Experience with tools like Carrier HAP or Trane Trace and related modeling experience Client facing experience and excellent communication skills, as you'll be working directly with client teams in a face-to-face environment This role is hybrid, with candidates needing to be able to commute to their Baltimore area offices.

Our client is seeking an experienced Mechanical Engineer with 5-10 years of expertise to join their team in Baltimore, Maryland. This role involves mechanical design for both new and existing facilities across multiple sectors, including education, government, healthcare, science & technology, and mission-critical facilities. Responsibilities · Develop mechanical design drawings and specifications. · Perform calculations for mechanical, plumbing, and fire protection designs. · Prepare cost estimates for design projects. Required Qualifications · Bachelor's Degree in Mechanical Engineering or Architectural Engineering (Mechanical Engineering concentration) from an accredited institution. · Minimum of five years of experience in MEP design. · Proficiency in Revit, AutoCAD, and Microsoft Office software. Position Benefits · Excellent work environment with a dedicated support staff. · Opportunities for training and professional development. · Competitive salary. · Outstanding health and dental insurance. · Exceptional 401(k) retirement plan. · Paid holidays and vacation. Why Join This Firm? Our client is a consulting engineering firm founded in 1968, specializing in comprehensive design and engineering services for building and utility infrastructure. Their expertise includes mechanical, electrical, and HVAC systems. The firm is known for handling technically challenging and diverse projects while incorporating sustainable design practices. Recognized as a Top Workplace by The Baltimore Sun Media and the Baltimore Business Journal, they offer a dynamic and supportive environment for career growth. Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. Our client is an Equal Opportunity Employer. If you are a highly skilled Mechanical Engineer looking for an opportunity to work on innovative projects in a collaborative and growth-focused environment, we encourage you to apply.

We have an immediate need for a Senior Level Mechanical Engineer experienced in commercial HVAC systems design to join our team of professionals in this fast-growing Energy Engineering and Sustainability Industry.We are looking for experienced engineers with a minimum of 5 years of experience working with the design and engineering of commercial building HVAC and Plumbing systems as well as energy evaluations and energy savings calculations.The ideal candidate would also possess the ability to identify building operational issues as well as potential Energy Conservation Measures. Candidate will have the opportunity to work on various projects with HVAC systems and building operations including MEP design, commissioning, retro-commissioning, energy audits and building operations trouble shooting. Global Facility Solutions offers commercial building engineering services with a focus on providing customers with Objective energy and facility solutions to help optimize building performance and reduce operating costs. Our customers are provided with a full range of services including MEP Engineering Design, Energy Auditing, Energy Retrofits, Retro-Commissioning Services, Commissioning Services, LEED Consulting & Energy Star Services, Utility Rebates & Energy Modeling and Construction Management Services. We primarily serve clients in the Commercial, Hospitality, Educational, Higher Education and Government marketplaces. Headquartered in Columbia, Maryland, Global Facility Solutions has been providing engineering and sustainable solutions to our clients for over 19 years and operates nationwide as an independent and objective solution provider. We are part of the Exigent Services family of businesses with over $250 million in annual revenue. Join our team to be part of the Energy and Sustainability Services industry! The Candidate should possess at a minimum: Experience with the design and engineering of heating, ventilating and air conditioning systems and commercial plumbing systems for the commercial and governmental markets including general office buildings and educational buildings. Experience with and ability to develop HVAC drawings from concept through construction documentation using AutoCAD or Revit. Experience with commercial building mechanical systems such as HVAC, motors, distribution systems, central plants and control systems. Knowledge of HVAC equipment such as chillers, air handlers and chilled/heating water distribution networks, pipe and ductwork sizing. Experience with performing cooling and heating load calculations using Carrier HAP or Trane Trace including building energy saving simulations and energy savings calculations. Available Benefits: Full-time role with Base & Performance Bonus Flexible Work Environment 401(k) with company match Medical, Dental & Vision Healthcare LTD/STD and Life Insurances Paid Vacation & Sick Days Requirements Include: U.S. Citizenship is REQUIRED. BS in Mechanical Engineering with a PE registration or ability to obtain one within a year. Minimum of 5 years of experience working with commercial HVAC systems. Excellent written/verbal communications skills Some overnight travel is required. Role would be based out of the Columbia, MD office. If you are passionate about mechanical engineering and excel at customer service, come join our team of engineering professionals! GFS is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Mechanical Engineer Opportunity Join a Leading MEP Design Firm! About Us We are one of the premier MEP design firms, known for our innovative solutions and exceptional client experiences. At the heart of our success are our people and our commitment to fostering a supportive and rewarding work environment. We believe that prioritizing our employees isn't just the right thing to do-it's what gives us a competitive edge! If you're a passionate and driven Mechanical Engineer looking for a fulfilling career with a company that values your growth, keep reading, we want to hear from you! Why Join Us? We offer a competitive and comprehensive package to ensure our team members thrive both professionally and personally: Competitive Base Salary reflective of your expertise Lucrative Bonus Package tied to performance Outstanding Benefits to prioritize your well-being Generous PTO to recharge and maintain balance 401(k) Plan to invest in your future Responsibilities: Design mechanical systems including heating, cooling, heat rejection, air and water distribution, ventilation, air conditioning, building automation and controls. Perform system design calculations, load calculations and some Energy modeling experience. Select equipment for use in building systems. Incorporate sustainable design methods in buildings. Prepare contract drawings detailing the designed systems. Report writing and specification preparation. Coordinate work with engineers of other disciplines and architects. Attend meetings and communicate with clients to establish their needs and discuss design issues with them. Manage a small project, work area or technical skill set, monitor quality of work, and is involved in client liaison. Assist in the procurement of work; manage multi-disciplinary project teams including client relations and team motivation Qualifications: Bachelor's degree in Mechanical Engineering from an accredited 4-year institution Minimum of 4 years professional experience in commercial/institutional building projects. 4+ years' experience designing HVAC systems for buildings Strong AutoCAD and Revit capabilities EIT or PE license highly desirable Strong fundamental understanding of national building codes Knowledge of Microsoft Office suite Strong Analytical and quantitative skills, and a demonstrated capability for analysis and strategic thinking Strong initiative-the willingness and ability to succeed in a collaborative, team-based environment Ability to multi-task with multiple projects in order to meet strict deadlines. Join Us Today! Be part of a company where your work makes a difference, and your contributions are celebrated. Apply now to embark on a rewarding career that blends innovation, collaboration, and growth.

Manufacturing / Continuous Improvements / Process Engineer $100,000 - $130,000 + Excellent Benefits Baltimore, MD Are you a Manufacturing / Process Engineer, looking to step up in to multisite role where you will be responsible for all improvement projects and be fast tracked in to a Management position? This is an excellent opportunity to receive on the job training from industry experts and gain further certifications through external courses to allow you to develop as a Continuous Improvement Specialist. This is a great time to join this well-established manufacturer as they continue to grow and dominate their industry. They have a great reputation for developing their engineers and always look to promote internally. On offer is a varied role where you will be responsible for implementing process improvement projects and getting involved in production planning for 4 facilities. You will be on the shop floor observing and processing data whilst also working closely with the Plant Managers. This role would suit a Manufacturing or Process Engineer, who is looking to work in an assembly manufacturing environment where you will get loads of training and development whilst being molded in to a management position. The Role: *Responsible for 4 facilities with up to 25% travel *Implementing new processes and leading CI projects *40% on the shop floor observing and processing data *Working closely with Plant Manager and other engineering departments The Candidate: *Experienced Continuous Improvements / Process / Manufacturing Engineer *Looking to work in an assembly manufacturing environment *Strong process improvement skills *Wants training and progression

As a Principal Antenna Engineer with 7+ years of expereince, you will lead the design, development, and testing of innovative RF and antenna modules for SatCom user terminals. In this senior role, you will manage the Antenna Engineering team, overseeing all aspects of antenna design and integration, from concept through production. The ideal candidate will possess extensive experience in microwave and antenna engineering, prototyping, testing, and simulation design modeling. Your responsibilities will include leading full-wave EM simulations to deliver comprehensive antenna design packages, coordinating prototype development, and driving design verification testing (DVT) processes. This includes creating test plans, setting up configurations, conducting measurements, and generating test reports. You will also be accountable for troubleshooting and problem resolution throughout the development cycle. As the leader of the Antenna Engineering team, you will collaborate closely with other cross-functional teams (e.g., mechanical, electrical, software) to ensure seamless integration and execution of projects. Strong leadership, organizational, and communication skills are essential for success in this role. Main Responsibilities Architect and lead the design of antenna and RF systems for Ku- and Ka-band SatCom terminal products Oversee the design and development of various types of Ku- and Ka-band antenna apertures for SatCom terminal applications Utilize advanced simulation software and physical modeling to conduct in-depth antenna analyses for design optimization and trade-offs Develop and generate design documents and technical packages to support contract manufacturers in prototype fabrication Lead the drafting of test plans for RF and antenna modules, ensuring thorough design verification test (DVT) campaigns Establish and manage RF lab facilities, coordinating and conducting RF and antenna tests, measurements, and characterization Design RF and antenna test setups and develop necessary testing fixtures to ensure accurate measurements Write and manage scripting languages to automate testing processes for improved efficiency and accuracy Create and review comprehensive antenna and RF test reports, ensuring data accuracy and clarity Lead cross-functional engineering teams to review and approve antenna system designs, ensuring alignment with overall product goals Support production ramp-up by providing technical guidance to manufacturing partners for prototypes and volume production Provide expert engineering analysis and define system specifications for Electronically Steered Antennas (ESA), incorporating radiating elements, beamforming chips, polarizers, and radomes Calculate and estimate AESA design features and performance parameters, including radiator types, element count, beam scan range, G/T, and EIRP, based on customer specifications Design, optimize, and develop AESA antennas and associated components such as polarizers and radomes, using advanced simulations followed by prototyping and validation through measurements Collaborate with cross-functional teams to ensure the integration of beamforming MMIC chips, polarizers, radomes, and controllers in ESA systems, providing high-level technical oversight Required Qualifications & Skills Minimum: MS degree in Electrical Engineering or Physics with a focus on antenna research. Preferred: Ph.D. in Electrical Engineering or Physics with extensive research experience in antenna and EM-wave theory. 7+ years of experience in designing and developing SatCom antenna apertures, including phased array antennas. 7+ years of experience in antenna and RF system architecture design. Strong knowledge and understanding of antenna design principles and microwave theory. Extensive experience with antenna design and simulation tools such as HFSS, CST, or equivalent software. Proven experience operating RF test equipment, including signal generators, spectrum analyzers, and vector network analyzers. Solid understanding of antenna testing facilities and methodologies, including far-field and near-field range measurements. Knowledge of cost-effective manufacturing technologies for delivering antenna products. Expertise in the design and development of flat-panel, active steerable-beam phased array antennas, incorporating beamforming chips. Leadership experience managing and mentoring engineering teams, with a proven ability to lead cross-functional teams through complex projects from concept to completion. Strong decision-making and problem-solving skills in fast-paced and challenging environments, especially during design verification and troubleshooting phases. Experience in strategic planning and project management, ensuring alignment of team activities with business goals and deadlines. Experience in the design and development of polarizers is a plus. Experience in designing advanced PCB-based radiators, such as meta-surface radiators, with wide-scan angles and low cross-polarization. Strong knowledge of commercial microwave PCB materials and processes is highly preferred. Experience in the design and development of flat-panel antennas. About Intellian Technologies Intellian is the world's leading provider of satellite antennas and terminals, with a mission to empower connectivity so connectivity can empower the world. We are driven by a passion for innovation and agile responsiveness to customer needs. As the crucial link between satellite networks and millions of people on Earth, Intellian's leading technology and antennas empower global connectivity across oceans and continents, organizations, and communities. Strategic thinking, an obsession with quality, and a proven ability to deliver enable Intellian to invent for the future, creating mutual success for partners and customers as the world's connectivity needs evolve. Pay Transparency The estimated salary range for this role is $200,000 - $280,000 Actual pay will vary based on varying factors, including but not limited to relevant experience. Benefits We offer a generous benefits package, including flexible time off and paid holidays. Eligible employees also have access to medical, dental, and vision insurance and short-term and long-term disability coverage. A 401(k) plan with employer safe harbor matching is available. Additional compensation elements may be offered depending on the role, which may include an opportunity for an annual bonus based on both company and individual performance.

About Us: At Magma Space, we're on a mission to revolutionize satellite stability and control. We are developing groundbreaking control actuators, including magnetically levitated reaction wheels and control moment gyroscopes that drastically reduce onboard vibrations while delivering unmatched torque. But our vision goes beyond hardware - we're at the forefront of integrating AI-enhanced software for real-time environment monitoring with novel sensing capabilities. Our goal is to provide satellites with an unprecedented level of stability, agility, and accuracy, enhancing satellite capabilities like never before. We are proud to be supported by NASA and the US Space Force through grants and collaboration opportunities that fuel our innovative efforts. These partnerships underscore the importance and potential of our technology in advancing the future of space exploration and defense. Join us at Magma Space and be part of a team that's setting a new standard for satellite control, where your work will have a lasting impact on the space industry and beyond. Position Overview: We are seeking a passionate and experienced Electrical Engineer to join our team in Washington, DC. The ideal candidate will have a strong background in satellite technology, with a deep understanding of both the practical and theoretical aspects of electrical engineering in the space industry. This role requires a hands-on approach, the ability to design, develop, and test complex electrical systems for our satellite subsystems, and a strong team-oriented mindset. Key Responsibilities: Design, develop, and test electrical systems for satellite applications, including power systems, communication systems, and sensors. Develop control algorithms and support electric motors design and integration. Collaborate with a multidisciplinary team to integrate electrical systems into satellite designs. Work hands-on with hardware, assembling and testing prototypes, and troubleshooting issues. Conduct theoretical analysis and simulations to validate design concepts and optimize system performance. Develop and maintain documentation for designs, tests, and systems. Design PCB layouts, select components, and create detailed CAD drawings and BOMs. Take initiative as a self-starter, driving projects forward with minimal supervision. Be willing to go the extra mile to ensure project success and meet tight deadlines. Stay up-to-date with the latest advancements in electrical engineering and space technology. Qualifications: Bachelor's degree in Electrical Engineering, Aerospace Engineering, Computer Science or a related field and 3-5 years of experience. Strong knowledge and experience in satellite technology, including power management, control theory, and data communication. Proficient in the use of simulation tools (e.g., SPICE, MATLAB) and CAD software (e.g., Altium) for circuit design and analysis. Hands-on experience with electronics prototyping, soldering, and testing. Solid understanding of the theory behind electrical systems and the ability to apply it in practical scenarios. Must be a team player with excellent collaboration and communication skills. Strong problem-solving skills and the ability to work in a fast-paced, dynamic environment. Self-starter mentality with a proactive approach to tasks and challenges. Must be a US citizen or national, US permanent resident (current Green Card holder), or lawfully admitted into the US as a refugee or granted asylum. Preferred Qualifications: A passion for tinkering, building, and experimenting with electronics and hardware. Experience with programming microcontrollers (e.g., Arduino, Raspberry Pi, etc.) Experience with space-grade components and understanding of the environmental challenges associated with space technology. Previous experience working in a start-up environment or on space-related projects. What We Offer: The opportunity to work on cutting-edge technology in the rapidly growing space industry. A collaborative and innovative work environment. Compensation will be a combination of salary and equity. Comprehensive benefits package, including 401(k), health insurance with dental and vision, paid vacation, paid sick leave, paid holidays, paid parental leave, free gym on site. Flexible work schedule. Relocation assistance. The chance to make a significant impact on the future of space exploration. Travel Requirements: Up to 10%, typically The selected applicant will be required to pass a pre-employment third-party background check. Magma Space Inc. is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Even if you don't meet all the qualifications as outlined here, but are still excited about the role, we encourage you to apply anyway.

This role is responsible for site development for a series of small modular nuclear power plants. No Nuclear experience is required for this position. The Civil Engineering team will oversee the design of multiple civil/structural buildings and structures across the plant site and will work collaboratively with a multi-disciplined team of other engineers, suppliers, and project stakeholders to coordinate the successful design of the structural buildings and structures. Pay Range: 109K to 152K based on experience Hours: Standard office hours are 8:00am ET to 5:00pm ET, Monday -Friday Benefits: Robust benefits package that includes a 401K plan with employer match, Medical/Dental/Vision Insurance, Life and Disability Insurance, Paid Time Off, and a Tuition Reimbursement/Professional Development policy that supports the continuing education of our employees. Relocation assistance available for qualified candidates Competencies for this role include: Site Layout Site Development Site Preparation Grading Backfill Stormwater Management Surveying Soil Mechanics Erosion and Sediment AutoCAD / Civil 3D Location: Rockville, MD (DMV area) - onsite - RELOCATION ASSISTANCE IS AVAILABLE Travel Expectations: 25% to %50 (as needed for project assignment, team rotation, one week every 6 to 8 weeks, starting the end of this year) Hours: Standard office hours are 8:00am ET to 5:00pm ET, Monday -Friday Job Profile Minimum Qualifications: Bachelor's degree in civil or structural engineering or related degree from an accredited institution. Typically, five years of experience in an engineering role required or 3 years and a Masters. Experience with site development, grading, roadway, survey, stormwater, hydrology or soil mechanics is required. Experience with analysis, design, evaluation, and/or construction of civil structures, including but not limited to, industrial structures, commercial and residential buildings, power generation facilities, and infrastructure. Understanding of civil engineering fundamentals, such as mechanics, materials, construction techniques, codes and standards, environmental and economic impact, and professional ethics.

Title: Project Civil Engineer Location: Prefer Norfolk, VA (open to Richmond, VA / Washington, DC / Fredericksburg, VA / Newport News, VA / Chesapeake, VA / Virginia Beach, VA / Petersburg, VA / Bethesda, MD) Pay: Up to $61/hour Overview: Sterling has helped build careers for thousands for professionals like yourself. Our expert recruiters support you at every step in the process and as a Best of Staffing company, Sterling provides exciting work with exceptional employers across the U.S. Hire Type: Direct Hire Benefits: Medical, dental, vision, 401K, Holiday pay, and PTO Key Responsibilities: Lead and manage 5-10 large-scale gas transmission projects, ensuring timely and successful completion. Coordinate and support multiple teams, clients, and projects, maintaining clear and effective communication. Utilize Microsoft Office, MS Projects, and utility-based GIS applications to manage project documentation and schedules. Engage in client-facing activities, demonstrating strong communication skills and the ability to build and maintain client relationships. Ensure all projects comply with industry standards and regulations, maintaining a high level of safety and quality. Required Qualifications: 5-10 years of experience in the natural gas industry, with a focus on transmission pipelines. Professional Engineer (PE) license or the ability to obtain one within one year. Exceptional organizational skills and attention to detail. Strong leadership skills with the ability to manage multiple teams and projects. Proficiency in Microsoft Office, MS Projects, and utility-based GIS applications. Excellent communication and client-facing skills. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

ABC Technologies Inc. is a world leader in vertically integrated plastic processing, supporting a global organization with locations in North America, South America, Europe and Asia. ABC Technologies' core business as an Automotive Tier 1 supplier is in the Design, Development and Production of plastic automotive systems and components for OEMs worldwide. Responsibilities: • Responsible for planning and executing the R & D projects assigned by the supervisor and timely completion of incoming development requests which includes design, fabrication and testing of prototypes as well as completing engineering change notices. Some CNC machining of prototypes as the method of fabrication may be required and trained on the job. • Product responsibility includes Specialty Products, Automotive and Marketing as needed. • Maintain a high degree of knowledge and awareness in the relevant fluid mechanics technology area and share the knowledge with other in the group. • Willing to learn plastic part design at a detailed level including basics of tool construction. • Responsible for technical organization of the assigned projects to ensure that experiments are properly designed, planned, and conducted, while ensuring that each project has proper documentation for reproducibility and legal/patenting purposes. • Responsible for organizing and analyzing experimental data, interpreting and presenting the results in a professional manner. • Responsible for active communication with and continual reporting to the supervisor. • Responsible for keeping the R&D office and lab areas in a tidy and organize manner. Experience: Experience in CAD and product design are required. A demonstrable history of precision fabrication of small parts is required. Competence in product development processes, CNC machining, and fluid flow systems are all strongly desired. Candidate ideally has an ability to manage sub-tasks requiring FEA analysis. Ideal candidate will have exceptional organizational skills, be able to work independently as well as within a multi-disciplinary team.Excellent communication and presentation skills are also beneficial. Proven experience in leading development projects in workplace or school.

Ethernet Engineer Falls Church, VA Looking to significantly progress your career? I'm working with a market leading commercial construction business who have 3 years worth of work booked in across Virginia and Atlanta. If you're looking to take your career to the next level, I would love to hear from you. This role will involve designing, testing, and implementing PoE++ solutions and becoming the internal subject matter expert. Responsibilities Troubleshoot and resolve technical challenges related to PoE++ technology during project execution. Develop detailed specifications and standards for implementing PoE++ technology in alignment with project requirements. Work closely with architects, electrical contractors, and IT specialists to ensure seamless integration of PoE++ systems. Provide on-site support during installation, testing, and commissioning of PoE++ systems. Collaborate with project teams to incorporate PoE++ technology into building designs and infrastructure. What's needed Education Bachelor's degree in Electrical Engineering, Industrial Engineering, or Network Engineering. Experience 3+ years of experience in electrical or industrial engineering, with a focus on power systems or low-voltage technology. Hands-on experience with PoE systems, power delivery, or related electrical infrastructure is highly desirable. What's included Annual bonus program based on performance 401K Medical, Vision insurance, Dental Pre-tax Flexible Spending Plans (Health and Dependent Care) + More!

Job Title: Manufacturing Engineer II Industry: Medical Device Reports To: Director I, Instrument Manufacturing My client is seeking a highly skilled and motivated Manufacturing Engineer II to join their Instrument Manufacturing team. The successful candidate will be responsible for developing and implementing optimal, cost-effective manufacturing processes and methods in accordance with product specifications and quality standards. This role involves recommending and implementing improvements to production designs, tools, fixtures, processes, methods, and controls. The Manufacturing Engineer II will also coordinate and assist in the manufacturing launch of new or revised products. Key Responsibilities: Develop and implement optimal, cost-effective manufacturing processes and methods. Recommend and implement improvements to production designs, processes, methods, and controls. Coordinate the manufacturing launch of new/revised products, including goal setting, assembly documentation, training, and evaluation. Resolve design and process issues in production or as indicated by field issues. Design, develop, test, and/or source product changes, tools, machinery, and equipment. Collaborate with vendors to determine product specifications and arrange for the purchase of machinery and equipment. Experience and Qualifications: Bachelor's degree in Engineering (Mechanical, Electrical, Manufacturing) or related field. Minimum of 3 years of related experience in manufacturing of instrumentation or related field. Experience with ISO, GMP, and/or biotechnology industry organizations is strongly preferred. If interested, please apply in!

This position is responsible for coordination of all engineering and field activities related to assigned projects. These projects include new construction and renovations. Provide leadership support for assigned projects to the Albireo Energy project team, subcontractors, contractors, and customers to maintain a high level of customer satisfaction as well as positive financial results. This position supports Gambrills, MD. Essential Functions: An individual must be able to successfully perform the essential functions of this position with or without a reasonable accommodation. Support the Project Manager complete assigned projects on or before the scheduled completion date by coordinating with and facilitating communication. This includes sales to operations turnover, application engineering, programming, and field execution. Demonstrate comprehension of project specific control sequences and related scope. Coordinate and collaborate with BAS application engineers to develop shop drawings, submittals, databases, programs, and graphical interfaces. Provide quality assurance of engineering packages prior to submission. Must have the ability to modify packages as necessary before and after submission to customer. Understanding of the scope of work, ability to read and interpret project plans and specifications. High level understanding of end user standards and requirements. Maintain those standards for all scope and the life of the project. Proactively communicate technical issues to project managers and more senior level technicians as well as contractors and subcontractors. Collaborate with the Project Manager to forecast revenues and re-estimate project costs as it relates to project execution. Support the project team by performing specialist and subcontractor coordination to maintain the project schedule and working relationships with other jobsite contractors. Maintain redlines, and coordinate field markups from the project team and submit As-Built documents. Coordinate and maintain commissioning requirements for third party commissioning and testing. Coordinate and manage the check-out, start-up, and commissioning activities to ensure the system is functional and complete. Report to work on time and ready to perform assigned tasks. Mentors and sets a good example for lower-level team members. Take part in solutions-based discussions with owners and project stakeholders. Attends and contributes to project meetings, as necessary. Looks for opportunities and risk to keep the project moving forward. Communicate with jobsite personnel from other trades to complete project objectives. Complete assigned training as part of the positions career growth plan. Support a performance-based culture, both team and individual, to assure continuous improvement and alignment with enterprise vision, mission, and objectives. Support a culture based on open/honest dialogue and involvement with all team members that demonstrates the value of their input and engagement in improving performance. Support a culture of high performance and accountability in employee and site safety as well as other aspects of the business. Complete weekly timecards accurately and timely by 8am every Monday Requirements Equivalent experience of 4 years or more including vocational school, or a bachelor's degree in engineering, computer technology or similar field with 2+ years of experience preferred. Have a moderate understanding of building construction methods, HVAC Controls, electrical systems as well as mechanical systems. Able to execute HVAC Controls, Building Automation Systems projects with high level of contract and project complexity. Prior experience writing Building Automation Systems programs and graphics. Johnson Controls, Siemens, Honeywell, Schneider, etc. Experience dealing with a diverse and large number of simultaneous challenges, requiring knowledge of multiple disciplines while maintaining control. Must have the ability to communicate technical material to a non-technical audience. Self-starter attitude that is inquisitive, intuitive and has a willingness to learn and grow. Prior experience supporting construction and field employee groups, including strong problem-solving skills, critical thinking, and self-initiative. Commitment to “open door” contact with all field employees. Excellent written and verbal communication, interpersonal skills; high quality document and report preparation. Key leadership competencies in addition to high ethical standards, strong values, integrity, drive to deliver results, pride in personal and team performance, diplomatic problem solving and decision making, building effective teams, and action orientation are fundamental imperatives. Must be committed, calm and professional at all times. Must use Microsoft suite of products including Outlook, Excel, Word, Power Point, and Visio. Other software includes AutoCAD and Bluebeam. Pay Rate: $43/HR-$55/HR. DOE. Albireo Energy is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

The Development Engineer will collaborate with the engineering team to design, develop, and qualify batteries according to customer specifications and documentation requirements in line with project timing and budgets. The process includes research and development into parts, materials, and assembly techniques. The engineer will work closely with the engineering team and technicians to execute and deliver existing and new products. Responsibilities Lead all development phases including design, prototyping, validation, and pilot production Prepare and present internal and customer facing preliminary and critical design reviews Plan, develop, and execute Design of Experiment (DOE) for fabrication and testing of batteries Work closely with engineering team to determine battery design and mechanical characteristics Develop processes/tooling for pilot scale manufacturing Coordinate and execute product development trials Summarize and present respective results, with conclusions, and recommendations Develop assembly and process specifications, along with other engineering documents Perform root cause analysis Qualifications US Citizen BS in Chemistry, Chemical Engineering, Mechanical or related Science or Engineering discipline 3 - 5 years' experience in R&D, or Product Development Good interpersonal and communication skills Able to contribute to collaborative team environment Self-motivated and hands-on. Detail oriented and able to manage multiple tasks Understanding of contract data requirements list (CDRL) Hiring Preferences Defense or Aerospace industry experience Experience with battery design, energy storage, power sources, or electrochemistry

Senior Front-End Engineer (Part-Time Contract, Potential for Full-Time) Job Type: Part-Time Contract (10-20 hours per week) with Potential for Full-Time About the Role We are seeking an experienced Senior Front-End Engineer with expertise in React Native, React.js, Tailwind CSS, and TypeScript to join our team in Old Town Alexandria, VA. This is a part-time contract role (10-20 hours per week) with the potential to transition into a full-time position based on performance and company needs. The role requires regular in-office collaboration, so candidates should be local and able to commute frequently. As a senior engineer, you will play a key role in shaping our front-end architecture and leading technical decisions. You should have a deep understanding of modern front-end development and a strong ability to collaborate across teams. Responsibilities Develop and maintain scalable, high-performance web and mobile applications using React Native and React.js Lead front-end architecture decisions and ensure best practices in TypeScript and modern front-end development Implement modern UI/UX designs using Tailwind CSS Optimize applications for speed, performance, and scalability Work closely with product, design, and backend teams to build seamless user experiences Conduct code reviews and improve development workflows Requirements 5+ years of professional front-end development experience Strong expertise in React Native and React.js Proficiency in TypeScript and Tailwind CSS Experience designing and maintaining scalable front-end architectures Ability to work onsite in Old Town Alexandria, VA, regularly Strong understanding of Agile development processes and version control (Git) Excellent problem-solving skills and attention to detail Preferred Qualifications Experience working in a startup environment Basic understanding of backend technologies, particularly Django and PostgreSQL Familiarity with CI/CD pipelines and automated testing for front-end applications This is a flexible, part-time contract role (10-20 hours per week) with potential for full-time employment based on performance and company needs. How to Apply: Interested? We'd love to chat! Send your resume and optional cover letter to ***********************.

Job Title: Senior Track Engineer Pay: $100-140k depending on experience Schedule: Full-time, hybrid work schedule with a minimum of 3 days on-site per week and generally two days remote Status of Hire: full-time, direct hire, salaried with benefits Responsibilities: Ensure track inspections and inspection reports meet the requirements of the TRST- 1000 Track Maintenance and Inspection Manual and be capable of mentoring and training personnel on all TRST inspection and maintenance systems of record programs quality and reliability Assist the WMATA Management Team with development of inspection plans and schedules to support compliance of the TRST-1000 Manual Support Project Manager in developing cost benefit analysis for new projects, develop analysis for cost and schedule impact of potential project changes/change orders Perform site visits and quality checks of accountable track inspectors Comply with WMATA Roadway Worker Protection and safety/operating rules in the discharge and performance of field duties Generates key performance measures which enhance and stand-up the TRST business plan with a focus on track inspection and maintenance practices utilizing Cognos, Maximo, MaxTrax, Optram and Track Geometry Background and Experience Required: Must have 20 years' rail experience with a minimum of 8 years track experience as an inspector, foreman or supervisor Minimum of 10 years of experience inspecting or working on an FRA Class 4 railroad or higher Ability to perform track geometry measurements such as gauge, cross level, and alignment and be able to assess track conditions and identify defects in accordance with TRST-1000 Track Maintenance and Inspection Standards and WMATA Design Criteria Ability to present technical information both written and verbally to a diverse audience for efficient and effective communication with the designated WMATA authority Maximo (EAM) superuser level expertise with SQL developer skillset capable of writing and supporting background query development to support performance measuring activities Track inspection experience and data collection analysis and monitoring Ability to coordinate with IT staff to support system integration activities relative to the various systems which support track inspection data recording and compliance Experience having developed and implementing Job Plans and Preventive Maintenance programs within the EAM system based on business plan requirements Experience with Optram a plus (ability to thread/write within the Track and Structures linear asset reporting environments) Experience with MaxTrax mobile application and desktop version a plus (linear asset reporting) **Must be authorized to work in the United States; client is not able to offer sponsorship at this time **Must be able to pass a pre-employment drug test, background check, and physical to be eligible for hire We are an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, or any other criteria protected by governing law. All candidates must be able to pass pre-employment drug screens and background checks to be considered eligible for hire.

Insight Global is currently seeking a remote Substation CAD Design Engineer. This person will be responsible for developing Physical (HV/CIV) models using AutoDesk Inventor and associate required iProperty information. Other responsibilities include: Create/develop Inventor parts and assemblies for the use within an electric substation. Assemble Inventor parts and assemblies into full electric substations. Add and manage part and assembly specific data within the models and AutoDesk Vault. Assist in configuring the AutoDesk Inventor environment. Create AutoDesk Inventor drawings from electric substation models. Convert High Voltage and Civil design standards into models and smart drawings. Manage drawings and data within AutoDesk Vault. Develop required procedures, job aids and flow charts in support of the Intelligent CAD implementation. Develop and manage the AutoDesk Inventor, Spatial Business Systems, and Autodesk Vault databases utilizing existing other data sources to ensure content is data rich. Compensation: $55/hr to $62/hr. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.