Automatically Apply For Jobs With Zippi

Upload your resume to get started.

Radio Frequency Engineer skills for your resume and career

Updated January 8, 2025

3 min read

Quoted Expert

Dr. Arif Engin

Below we've compiled a list of the most critical radio frequency engineer skills. We ranked the top skills for radio frequency engineers based on the percentage of resumes they appeared on. For example, 8.6% of radio frequency engineer resumes contained test equipment as a skill. Continue reading to find out what skills a radio frequency engineer needs to be successful in the workplace.

15 radio frequency engineer skills for your resume and career

1. Test Equipment

Test equipment is a mechanical tool or a device which is used create signals and gather response from an electronic device under test. It helps in detecting any faults in the device and it also proves the proper operation of the electronic device.

Here's how radio frequency engineers use test equipment:

Execute and verify integration and system tests including testing plans, identification of required test equipment and generation test case descriptions.
Designed and developed automated microwave test equipment systems (ATE) in support of military satellite hardware development.

2. Antenna

The antenna is a lengthy pole-like tool used in radio engineering to receive radio wave signals sent into space from transmitting stations. The waves are gotten by the antenna and transmitted using a transmitter into audible and clear sounds on the radio being used. Antennas have over the years grown beyond radios and now into cable TV's and in the use of ordinary televisions.

Here's how radio frequency engineers use antenna:

Performed antenna propagation of all two-way products to determine optimum performance characteristic condition for placement in factory fixture.
Performed S-parameter measurements, antenna pattern measurements using far and/or near field techniques, and antenna gain measurements.

3. System Performance

System performance refers to how efficient a computer system is, often measured on how much work is completed in a set timeframe. This measurement is estimated judging on a computer system's speed, the accuracy, and how efficient the work is completed. Depending on the field, a system's performance may be required to meet a certain level before the system can safely be used.

Here's how radio frequency engineers use system performance:

Work closely with System Performance Engineers to resolve customer complaints by performing specific data collection and evaluating new results.
Reviewed and updated system performance, capability development, and interface control documentation related to the JTRS development program.

4. System Design

System design refers to the electronic structural component of a system.

Here's how radio frequency engineers use system design:

General system design responsibility including working with or providing support to the engineers responsible for the various transmitter units.
Performed system design and analysis, developed frequency plan and designed and analyzed transmit and receive lineups.

5. Troubleshoot

Troubleshooting is the process of analyzing and fixing any kind of problem in a system or a machine. Troubleshooting is the detailed yet quick search in the system for the main source of an issue and solving it.

Here's how radio frequency engineers use troubleshoot:

Identify and analyze top offenders; troubleshoot selected customer complaints.
Trained technicians how to troubleshoot RF/analog and digital circuitry.

6. Macro

Here's how radio frequency engineers use macro:

Created several Visual Basic macro based programs to compile performance metrics and identify suspect resources increasing troubleshooting efficiency.
Developed Macro excel files for in excel reporting and data manipulation purposes.

Choose from 10+ customizable radio frequency engineer resume templates

Build a professional radio frequency engineer resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your radio frequency engineer resume.

7. PCB

The PCB (Printed Circuit Board) refers to the hardware part housing all of the device's electrical connections.

Here's how radio frequency engineers use pcb:

Optimized PCB layouts for attributes including signal integrity, self-interference and related parasitic phenomenon.
Coordinated with component distributors for timely delivery of parts for PCB assembly.

Select Skills To Add To Your Resume

Test Equipment

Antenna

System Performance

System Design

Troubleshoot

Macro

8. Post Processing

Here's how radio frequency engineers use post processing:

Perform post processing and data visualization using MS office applications.
Performed data post processing and recommended improvements based on findings.

9. GPS

GPS stands from Global Positioning System. It is a navigation system comprising of satellites that helps in determining the location, velocity, and synchronize time data for different modes of travel like air, sea, or land.

Here's how radio frequency engineers use gps:

Developed GPS sub carrier modulation circuitry.
Developed an interference scenario in-house using GPS Rx and ICOM Radio to validate EMIT's EMI prediction between co-located RF systems.

10. Interference

Interference pertains to the disruption of unwanted frequencies or signals in radio, television, cellphone, and other equipment.

Here's how radio frequency engineers use interference:

Performed link budget analysis, propagation analysis - coverage, interference, antenna selection and model tuning using Wizard simulation tool.
Performed site selection, site configuration, site coordination, antenna selection, coverage analysis, and interference analysis.

11. Power Meters

Here's how radio frequency engineers use power meters:

Employed broad skills in bench equipment on project, including network/spectrum/vector analyzers, oscilloscopes, power meters & RF power amps.
Performed pulsed rf measurements using peak power meters.

12. Transmitters

Here's how radio frequency engineers use transmitters:

Prepared engineering packages for installation of Microwave radio transmitters on radio towers.
Work on Transmission/Receiver feeder loss calculations for newly created and existing transmitters.

13. LTE

Here's how radio frequency engineers use lte:

Identified & architect of TrueCall LTE radio network measurement metrics for performance and coverage characterization.
Trained personal on basic telecommunication Alcatel-Lucent Verizon LTE field-test skills.

14. Switches

Here's how radio frequency engineers use switches:

Proposed, established and ran an in-house RFID test lab for product evaluations for tags, readers, switches and antennas.
Designed and procured RF electronics, sensors, circuit boards, switches, transformers and mechanical equipment for new upgrade project.

15. LabVIEW

Here's how radio frequency engineers use labview:

Developed LabVIEW based simulators used for new product development and Embedded Test Automation by customers at their facilities.
Developed and implemented Tools and Platforms Software Validation and Verification in LabVIEW.

12 Radio Frequency Engineer Resume Examples

Build a professional radio frequency engineer resume in minutes. Browse through our resume examples to identify the best way to word your resume. Then choose from 12+ resume templates to create your radio frequency engineer resume.


Linda Jordan Radio Frequency Engineer Contact Information Charlotte, NC (890) 555-7821 ljordan@example.com Skills • R • Prototype • Raw Materials • Process Control • On-Air • IP • Project Management • Hardware • DVP • Engineering Design Employment History Radio Frequency Engineer 2014 - Present Intermec Technology Charlotte, NC • Developed and characterized a 1000-meter antenna test range. • Designed microwave antenna switches used in vehicle mounted terminals. • Recommend changes on UMTS clusters to the customer to change handoff special parameters value, antenna. • Designed, built and documented RF surveillance receivers covering the frequency range 50 kHz - 13 GHz. Product Engineer 2009 - 2014 IBM Charlotte, NC • Provided sustaining test engineering support for the 750X embedded Micros. • Reviewed CAD drawings of new products for design for manufacturing issues. • Provided hardware engineering support for initial production runs at Singapore production site. • Review the event by ClearQuest Client Production database Tool. Design Development Engineer 2001 - 2009 Siemens Charlotte, NC • Developed testing scenarios for hardware. • Interfaced with the CAD personnel to create design packages. • Assigned to the Engineering Product Development Team. • Project management for several equipment installation projects totaling ~$2 million. Education Bachelor's Degree Electrical Engineering 1998 - 2001 Southern Illinois University Carbondale Carbondale, IL


Andrea Brown Radio Frequency Engineer Contact Info Plano, TX (610) 555-4379 abrown@example.com Skills Ensure ProductIeeeSystem PerformanceUnixULCFRElectrical EngineersRoutersLayoutTransformers Employment History Radio Frequency Engineer 2019 - Present Ericsson USA Plano, TX • Work Profile: Frequency planning for new macro and micro sites using MCOM. • Utilized RF Planning tools such as Atoll to conduct Cluster Designs. • Dedicated RF Operations and Maintenance (O&M) Engineer for AT&T Norfolk and Atlanta markets. Electrical Engineer 2016 - 2019 General Dynamics Carbondale, IL • Reviewed test data with management and made appropriate recommendation to improve system design and validation. • Organized a five years build schedule for the Missile Test Facility between GDAIS and GDEB. • Provide engineering support for troubleshooting electrical and electronic construction problems. • Replaced custom hardware and electrical components with COTS components. Computer Engineer 2015 - 2016 WPS Carbondale, IL • Supported offshore logistics and support for newly acquired company located in India using Citrix environment accessed via windows or Linux workstations. • Create and maintain Oracle Database tables used by PHP applications. • Managed network monitoring and ticketing tools deployed as guest OS(Linux) a Mac OS X server. Education Bachelor's Degree Electrical Engineering 2012 - 2015 Southern Illinois University Carbondale Carbondale, IL


Nathan Hamilton Radio Frequency Engineer College Park, MD nhamilton@example.com (590) 555-9267 Experience Radio Frequency Engineer 2019 - Present T-MobileCollege Park, MD • Processed and analyzed the data collected, and made changes to the RF Parameters in order to optimize the clusters. • Job Role: Network Equipment: NSN & Ericsson. • Oversee day-to-day operations of the site performance for UMTS and GSM Sites in the Los Angeles down-town area. • Recommend site upgrades such as HEPA Pas or Antenna changes. • Verify and ensures correct Tilts and Azimuths are implemented after Antenna Swap. Electrical Engineer 2017 - 2019 The Home DepotCollege Park, MD • Provide exceptional customer service Assist customers in locating specific items Assist in other departments as needed • Work with 3rd party systems integrators in the design/configuration/delivery of full racks of server hardware to meet tomcat software application requirements. • Performed Project Management functions for development of new thermoformed products and thermoforming Tools. Computer Engineer (Part-Time) 2016 - 2017 Lockheed MartinCollege Park, MD • Perform user account creation and password resets on Windows and UNIX Systems. • Work with HR for new employee setup and use Active Directory for rights management. Skills Avionics Arc Flash Handover GPA Electrical Systems Mac UL Personal Computers Link Budget Facility Education Bachelor's Degree Electrical Engineering 2014 - 2017 University of Maryland - College ParkCollege Park, MD


Kathryn Turner Radio Frequency Engineer Employment History Radio Frequency Engineer 2016 - Present SprintHouston, TX • Conducted site surveys and candidate evaluation for equipment location and antenna orientation 5. • Lead and coordinate with engineers in 3 southeast states on new site configurations with both CDMA and iDEN technology. • Communicated effectively with Administrators, Regional RF Directors, and the VP of Network Development. • Review project quotes for proper coverage - check LINK budget. • Help Troubleshoot problems on any In Building System.RF Engineer II - Custom Network Solutions -Northeast Region Radio Engineer 2015 - 2016 VerizonTampa, FL • Maintained and improved RF System Performance KPI's for Greater Chicago region. • Worked closely with integrators on the design of the DAS covering HHH Metrodome (Mall of America Field). • Used Odyssey for coverage predictions, terrain evaluation and Antenna Height study for site's candidate selections and evaluations. Drive Tester 2014 - 2015 T-MobileDavis, CA • collected data and assisted RF engineer with the processing. • Worked with Field Techs for BTS's network troubleshooting, regarding hardware and parameters and antenna adjustments. • Handled the tasks of developing testing instructions and providing effective support in RF Engineering operations. • Managed, analyzed and generated reports to analyze network data and troubleshoot issues with Service Impacting and Degrading reports. • Worked on SSV tests, cluster tests, and troubleshooting tests on regular basis. • Sprint CDMA initial market launch (greenfield buildout) Cleveland, Ohio Market. Education Bachelor's Degree Electrical Engineering 2011 - 2014 University of California - DavisDavis, CA Contact Information Houston, TX (560) 555-7629 kturner@example.com Skills Base Stations Clearance Radio Station Radio Equipment IP Antenna Labview Multiple Systems System Performance Audio Equipment


Carol Hart Radio Frequency Engineer Oakbrook Terrace, IL (890) 555-5662 chart@example.com Skills Atoll Internet Verizon SAN Project Management Drive Test Data Ldap Dexterity Unix GIT Employment History Radio Frequency Engineer 2011 - Present SprintOakbrook Terrace, IL • Established coverage design objectives are met by working with RF frequency planning and Field operation. • Provided RF and wireless transmission design and identified coverage and capacity requirements for RF projects. • Worked in CDMA, EV-DO, and IDEN network. • Perform system planning and design of distributed antenna systems. • Monitored daily performance statistics (Call drops, call quality, utilization, and interference). • Identified problems such as poor coverage, interference, power control and recommended possible solutions. Engineer 2010 - 2011 Sargent & LundyOakbrook Terrace, IL • Provided technical guidance to CAD designer/drafter. • Maintained/Administered LINUX test servers (HP ProLiant rack-mounted) for automated testing on LINUX. • Included in the hands-on design was CAD drawings, prototype assembly and testing. Engineering Trainee 2008 - 2009 Georgia Department of Economic DevelopmentNorth Atlanta, GA • Performed assigned tasks including: surveying, traffic operations, construction, and data collection. • Worked on I80 Design Build surveying roads with GPS, total station, and level loop. • Maintain and troubleshoot to component level critical spaceborne hardware anomalies. • Increased knowledge on PLC communication, several HMI software packages, interpreting P&ID's, and automation hardware. Education Master's Degree Electrical Engineering 2009 - 2010 DeVry UniversityOakbrook Terrace, IL Bachelor's Degree Electrical Engineering 2005 - 2008 Georgia Institute of TechnologyNorth Atlanta, GA


Lawrence Elliott Radio Frequency Engineer Austin, TX (280) 555-0444 lelliott@example.com Experience: Radio Frequency Engineer Motorola Solutions Austin, TX 2019 - Present • Developed automated test system to execute internal certification of CDMA cellular base stations to comply with industry standards. • Designed the power and RF systems to build cell sites for mobile telecommunication system. • Analyzed radio propagation requirements, terrain data, and link budget evaluation Provided technical information to Latin America customers on FLEX migration • Test, analyze and repair 2-way radio products to board or component level using electronic test equipment. Electrical Engineer KBR Houston, TX 2015 - 2019 • Prepare cost estimates and drawing and specification and justification and description. • Replaced Reformate tank water draw-off interface probes and routed to DCS. • Mentored/supervised electrical engineer and top-performing management team to steer projects using project management best practices in order to increase project effectiveness. • Work closely with product test team to verify hardware test covered customer specifications. Computer Engineer Best Buy Houston, TX 2010 - 2015 • Updated and Installed Windows 8 on all products when released. • Greet and help customers Give detailed recommendations for products based on hardware and software needs. • Performed desktop and laptop repairs for Linux/Unix OS, MacOs, and Windows OS systems. • Establish and calculate optimum values for database parameters, using manuals and calculator. Skills • Android • Wi-Fi • Antenna • Linux • Fpga • Tcp/Ip • Troubleshoot • Volte • Azimuth • RF Education: Bachelor's Degree Northeastern University Boston, MA 2007 - 2010 • Major: Electrical Engineering


Kathryn Black Radio Frequency Engineer Chantilly, VA (570) 555-5305 kblack@example.com Experience: 2017 - Present Radio Frequency Engineer / By Light Professional IT Services / Chantilly, VA • Designed and implemented baseband amplifier and filters, and RF power amplifiers used in transmitters up to 3.6 GHz. • Produced optimization process for the Sprint account team in Cleveland and trained the RF engineering teams in data collection and analysis. • Conducted design reviews as the RF point of contact for domestic and foreign military customers. • Conducted RF site surveys and prepared passive and active DAS designs and calculated link budget, BOM and traffic capacity. 2016 - 2017 Design Engineer / Sprint / Chantilly, VA • Lead engineer for the conversion of Cisco routers to Multi-AS configuration. • Managed all aspects of IT processes by linking local telecom division's infrastructure network to the Sprint's fiber optic network. • Created drawings for these circuit designs. • Project management several million dollar projects from concept to implementation. • Defined and documented build process for new UNIX servers used for monitoring and database functions. 2015 - 2016 Design Engineer Internship / Northrop Grumman / Chantilly, VA • Revised Computer Aided Design (CAD) electrical interchange drawings classified defense communication systems. • Planned Cost Estimates of job scope for completion of work. • Designed the Xilinx MicroBlaze Hardware Architecture used on digital sub-systems. Skills: Radio Station, Hardware, FEA, Electronic Components, EMI, Sanity, Vhdl, Data Collection, Antenna, Troubleshoot Education: 2012 - 2015 Bachelor's Degree Electrical Engineering / DeVry University / Oakbrook Terrace, IL


Alexis Harrison Radio Frequency Engineer Southfield, MI \| (790) 555-0319 \| aharrison@example.com Work Experience Radio Frequency Engineer, AT&T - Southfield, MI 2014 - Present Updated PRAMESH database with necessary changes like tilt and antenna recommendations for 2011 - 1C/2C. Designed, implemented, and optimized antenna sector splits to off load the high capacity sectors. Promoted to Lead E911 RF Engineer within three months. Optimized the CDMA wireless network in the Phoenix, AZ area. Field Engineer, Ford Motor Company - Southfield, MI 2012 - 2014 Provided hardware and software support to Ford customers on Dell and IBM systems. contracted thru TAC Worldwide Companies) Provided Technical Service Support to Ford Dealership Technicians. Provided full desktop support, LAN support and remote support. Test and accept all incoming fiber and copper T1's to the cell sites within my territory. Telecom Engineer, TEKsystems - Southfield, MI 2011 - 2012 Performed phone system migration from legacy system to VOIP (Cisco/Avaya) for internal offices and various customers. Reviewed QoS policies and configurations for network team members. Worked on Cisco and NEC VoIP hardware. Installed routers, switches; configured CSU/DSU's. Skills Voip, Voice Gateways, Android, Routers, Installation Supervision, Network Security, Interference, Wi-Fi, Unity, Link Budget Education Bachelor's Degree Electrical Engineering 2003 - 2006 Rensselaer Polytechnic Institute - Troy, NY


Lori West Radio Frequency Engineer San Diego, CA (830) 555-9507 lwest@example.com Experience Radio Frequency Engineer, Qualcomm, San Diego, CA 2020 - Present • Tested devices on live AT&T, Sprint, T-Mobile and Verizon networks. • Work directly with Verizon to get the products certified. • Worked on CA, VoLTE, 1xSrlte, csfb, Svlte technologies. Product Engineer, Caterpillar, Decatur, IL 2015 - 2020 • Analyze project proposal to determine feasibility, cost and timelines required to complete product development lifecycle. • Trained and mentored engineers for stress analysis and fatigue simulation and on CREO CAD modeling and finite element analysis. • Completed engineering design tasks and project assignments to support prototyping and production development activities. Design Development Engineer, Caterpillar, Decatur, IL 2012 - 2015 • Learned the applied fundamentals of engineering design (DFM, geometric tolerances, cost reduction, etc.) • Performed machine performance analysis, such as brake and vehicle dynamics analysis to support product development for wheel loaders. Skills • Engineering Drawings • Wireless Devices • Project Management • Cell Sites • Design Software • Antenna • Quality Standards • Path Surveys • MHZ • GPS Education 2009 - 2012 Bachelor's Degree Electrical Engineering, Pennsylvania State University Main, PA


Amber Rivera Radio Frequency Engineer McLean, VA \| (490) 555-7759 \| arivera@example.com Employment History: Sprint - McLean, VA 2018 - Present Radio Frequency Engineer • Managed in-building DAS system design, integration and performance and special event deployment for the corporation's CDMA/EVDO and iDEN networks. • Involved in link budget estimations and study for VoLTE. • Worked as key engineer for identifying and resolving complex distributed antenna system problems. • Integrated new sites for LTE/CDMA/EVDO in Geo-Plan Operated Data Pro data collection tool to capture investigate and network troubled areas. BAE Systems - McLean, VA 2010 - 2018 Systems Engineer • Administer network security, user management and file system security. Laboratory Corporation of America - Greensboro, NC 2008 - 2010 Network Support Engineer • Project Management, Helpdesk HDI Certification, Kaiser NT 4/2000, Cirtix Metaframe Certified, Lotus Notes. • Create IT network security polices and standard operating procedures. • Monitored, tuned and maintained the OV infrastructure. • Manage, Troubleshoot and Monitor LAN from workstation to server. Skills: Audio Equipment, HA, Visio, Interference, Labview, Troubleshoot, Sharepoint, DBA, Database, System Performance Education: University of North Carolina at Greensboro - Greensboro, NC 2005 - 2008 Bachelor's Degree Electrical Engineering


Nathan Hart Radio Frequency Engineer phone(890) 555-9606 addressFort Worth, TX emailnhart@example.com Experience 2017 - Present Radio Frequency Engineer Sprint · Fort Worth, TX • Co-Developed microwave interference tool, I.Q. • Created a local market Access database to track and report all RF safety training activities performed in the Florida Market area. 2012 - 2017 Test Engineer Ericsson USA · Arlington, TX • Coordinated shipment of required hardware not on site. • Downloaded and installed Microsoft SQL Server 2008 on windows OS. • Worked on Verizon VBO and IBDS systems integration, configuration and updating with solving related issues. • Coordinated with PINACLE QA team and collected all the Evolution for the Application. 2011 - 2012 Associate Radio Frequency Engineer Ericsson USA · Arlington, TX • Field optimization by changing Antenna type/tilt/orientation Analyze daily report of cell sites and maintain KPI. • Optimized post-launch LTE networks by recommending azimuth, downtilt, uptilt and antenna change. • Present RF project Status on weekly calls to key executives keeping them abreast of network progression and operability. • Sprint 1.9 MHz Restacking project: Created daily and hourly reports for the Phoenix market. • Performed GO-No-GO, Stationary, SSV, Cluster, IRAT, IFHO are the following drive test data collection. • Assisted in the DC RF Design. Skills • Compatibility • Wlan • Hardware • Troubleshoot • DAS • Data Collection • System Performance • Wi-Fi • MW • QA Education 2008 - 2011 Bachelor's Degree Electrical Engineering The University of Texas at Arlington · Arlington, TX


Tyler Mitchell Radio Frequency Engineer phone:(890) 555-8181 email:tmitchell@example.com address:Houston, TX Employment History Radio Frequency Engineer 2019 - Present Sprint · Houston, TX • Support testing of the First Office Application of CDMA/EVDO features to be activated in commercial customer networks. • Designed and implemented CDMA PCS network. • Performed performance engineering and parameter compliance for the CDMA, EVDO and HPPTT (QChat) Network. • Used RMT software to check parameters and set configurations as well as troubleshoot span issues. • Analyzed KPI's, investigated, troubleshoot and resolved network issues during testing. • Conducted Training/ Mentoring programs, Equipment Set up for Entry Level Associate RF Engineers. Associate Radio Frequency Engineer 2016 - 2019 Cyberonics · Houston, TX • Utilized RF design tools including Agilent's Genesys software for circuit modeling and analysis. • Used PCI Coverage plots with TEMS discovery to verify if feeders aren't swapped. • Assisted in the DC RF Design. • Overlay integration design of GSM/GPRS/EDGE/ to UMTS networks. • Conducted TX and RX GSM / EDGE, WCDMA, CDMA verification testing for products before lab entry. • Work with cluster engineers on post processing and approve optimization efforts for the BTS clusters. Drive Tester 2015 - 2016 T-Mobile · Houston, TX • Perform Antenna and Line work operations and assisting Field operations during NSN 2G and 3G Cell modernization to LTE activities. • Tasked with optimizing the UMTS network to include decreasing dropped calls and increasing network availability. • Participated in the initial UMTS System Design and validation of the UMTS network in Greater Los Angeles market. • Conducted Training/ Mentoring programs, Equipment Set up for Entry Level Associate RF Engineers. Skills Drive Routes RF Multiple Systems Coverage Analysis Gprs Parameter Changes Interference Troubleshoot Test Equipment Data Analysis Education Bachelor's Degree Electrical Engineering 2012 - 2015 Arizona State University · Phoenix, AZ

Create My Resume

Build a professional resume in minutes using this template.

What skills help Radio Frequency Engineers find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

What Radio Frequency Engineer skills would you recommend for someone trying to advance their career?

Dr. Arif Engin

Professor and Chair, San Diego State University

Electrical engineering graduates are sought by a wide range of employers in government and industry for many different types of work. The top occupations in electrical engineering fields are projected to grow and sometimes require an advanced degree.

Do you want to know more?

List of radio frequency engineer skills to add to your resume

The most important skills for a radio frequency engineer resume and required skills for a radio frequency engineer to have include:

Test Equipment
Antenna
System Performance
System Design
Troubleshoot
Macro
PCB
Post Processing
GPS
Interference
Power Meters
Transmitters
LTE
Switches
LabVIEW
Data Collection

KPI
Mixers
Prototyping
Test Procedures
FCC
Technical Support
Spectrum Analyzers
National Security
Broadband
Debugging
Power Amplifiers
MapInfo
CDMA
Atoll
Field Testing
Java

Link Budget
Synthesizers
Network Design
Adaptive
Dividers
Network Performance
GHZ
DAS
Oscillators
Verification Testing
R
Vector Network Analyzers
UMTS
Level Analysis

Updated January 8, 2025

Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Updated January 8, 2025

Browse architecture and engineering jobs