Quality Technician Jobs in Santee, CA

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. Role Description The Quality Inspector performs incoming inspection, in-process inspections, and final inspections of components and assemblies per control/quality plans. The Quality Inspector will review and approve final release documentation. Performs incoming inspections per control/quality plans for received materials. This role will also complete appropriate quality records within company and GMP guidelines, policies and procedures. Roles and Responsibilities: Inspect incoming or production materials for conformance to engineering drawings, schematics, and specifications; process standards and specifications; and production or process plans. Perform incoming test of components. Monitor for conformance to design or test specifications or standards. Accept or reject materials or articles; identify and document non-conformance and notify appropriate personnel of potential rejection of items. Refer/document unusual inspection problems to supervision, lead or Project Quality Engineer. Know using a variety of measuring tools including electrical test sets, multimeter, fixed, limit, plug-gages, steel rules, scales, micrometers, calipers, and surface plate. Assist in the writing and updating of inspection procedures, protocol, and checklists. Transferring, releasing or quarantining material physically according to inspection status Documenting and maintaining inspection and test records Understand the importance of product conformity. Understand lot numbers and traceability. Understand ISO 13485 quality assurance standards and the related documentation in support of. Maintains safe and clean work environment by keeping shelves, workstations, etc. neat and complying with procedures, rules and regulations. Complete respective paperwork/documentation. Education: Minimum of High School Diploma and two years or more working experience in a relevant, cGMP/FDA regulated industry. Required Knowledge & Experience: Be able to read and understand mechanical drawings and dimensions Be able to read and interpret drawing notes and able to understand configuration management (revision control) Be able to use basic measuring tools such as calipers, go-no/go gauges, torque wrenches, and others as necessary Experience with electrical test sets, multimeter, vision measuring system is a plus Experience working with an ERP system and data entry Experience with Outlook and MS Office. Good communication and organizational skills. Must possess good math fundamentals, comprehend written work instructions, and communicate well. Knowledge of medical device manufacturing Working understanding of GDP and GMP Excellent documentation skills, attention to detail and accuracy Team player, flexible multitask, good written/oral communicator Must be organized and able to coordinate activities with internal departments and outside vendors

Company: Leading Pharmaceutical/Medical Device Company Sr. Quality Systems Engineer About the Company: Join a dynamic and innovative company that has developed a cutting-edge medical device and two groundbreaking drugs, including a "non-opioid" pain manager. With over 700 employees and $700M in revenue last year, this is an exciting time to become part of their growing team. Key Responsibilities: Ensure the quality and compliance of products and processes. Administer and manage Master Control systems. Collaborate with cross-functional teams to maintain and improve quality systems. Why Join Us? Be part of a leading company in the pharmaceutical and medical device industry. Work on innovative products that make a difference in people's lives. Collaborate with a talented and dedicated team. Interested? Please attach your resume and provide your best contact number. Let's discuss this exciting opportunity further! Reach out to ***************************** for further questions. Desired Skills and Experience

We are seeking a highly skilled Lab Support Engineer to provide technical support for project and product lifecycles, including Radio Access Network (RAN), GPS, Timing/Reference signal distribution, and Device Automation Test Platforms. This role involves troubleshooting, documentation updates, lab equipment maintenance, and ensuring optimal test environments. The ideal candidate will have strong RF, digital, and automation expertise, along with experience in lab operations and test equipment. Principal Duties and Responsibilities Project & Product Support Provide technical support for RAN, GPS, signal distribution, and automation test platforms from development to deployment. Maintain and update documentation, design changes (hardware/software), and sustain project lifecycles. Conduct analysis to identify, troubleshoot, and debug technical issues related to RF, analog, and digital applications. Utilize spectrum/digital modulation analyzers to validate and troubleshoot RF signals. Calculate path loss for coaxial cables and RF signal distribution networks. Stay current with 5G NR, 4G LTE, and other 3GPP standards. Create and update procedures using Confluence and SharePoint. General Lab Support Troubleshoot technical issues with minimal guidance and execute test plans, failure analysis, and debugging. Operate General Purpose Test Equipment such as spectrum analyzers, signal generators, and cable testers. Configure and manage engineering lab machines, PDUs, and DNS services. Install and upgrade Windows software/tools on lab workstations. Maintain benches, racks, and cabling (coaxial & Ethernet) to ensure an organized lab environment. Document Standard Operating Procedures (SOPs) for equipment and processes. Ensure compliance with housekeeping and safety standards. Required Skills & Competencies Strong troubleshooting and problem-solving skills in RF, analog, and digital applications. Experience with 5G NR, 4G LTE, and other 3GPP standards. Ability to calculate RF path loss and work with signal distribution networks. Proficiency in using spectrum analyzers, signal generators, and modulation analyzers. Strong knowledge of lab automation, test execution, and failure analysis. Effective verbal and written communication skills for technical documentation and team collaboration. Ability to work independently with minimal supervision. Strong organizational and multitasking abilities in fast-paced environments. Preferred Qualifications Associate's degree in Computer Science, Electrical Engineering, Mathematics, or related field. CET certification or 2+ years of electronics coursework. 5+ years of experience with general computer skills and Microsoft applications. 3+ years of experience in the semiconductor or related industry. 2+ years of experience in a large matrixed organization. 3+ years of leadership experience (with or without direct reports). Level of Responsibility Works independently with minimal supervision. Communicates complex technical information to diverse audiences. Requires critical thinking and problem-solving in troubleshooting technical issues. Involves some strategic planning and process improvement initiatives.

Must have: BA/BS degree in a related scientific discipline or some related college coursework with a minimum of 2 year's experience in a biotech lab environment. The QC Associate I is responsible for routine, accurate and timely testing of QC samples according to standard protocols and operating procedures, such as flow cytometry related protocols. The QC Associate I will prioritize daily workload and work independently. They will participate in the review of data, report results, and complete all required documentation and database entries. QC Associate I will receive specific instructions and ongoing guidance regarding required tasks and expected results. Job responsibilities: Trains and becomes proficient in all the required techniques, operation of relevant equipment and software packages associated with testing, data analysis, and data reporting. This may require working with human blood, human or mammalian cell culture and/or animals and animal tissues. Routine, accurate and timely completion of all assigned QC tests under supervision and according to standard protocols or operating procedures. Will prioritize daily workload and develop skills to work independently. Analyze data and report test results including completion of all required documentation and database entries as required by QC protocols or operating procedures. Calibrate and maintain equipment. Report problems to QC Supervisor or Manager. Maintain logs and required documentation as necessary. Prepare supplies and reagents and assist with laboratory maintenance as needed. Promote a safe work environment. May provide recommendations on maintaining the safety of the work environment. Participate in Environmental, Health & Safety programs. Address corrective actions whenever a hazard is identified. Notify supervisor and Safety Officer(s) of all observed hazardous conditions or unsafe work practices. Keep abreast of the basic requirements for safety compliance in own area of work and complies with those requirements. Participate in group or intra-department teams and projects as required. Participate in assigned cross-training. Education and experience: BA/BS degree in a related scientific discipline or some related college coursework with a minimum of 2 years experience in a biotech lab environment. Experience in an industrial or research laboratory preferred. Flow Cytometry experience required and Tissue Culture experience highly preferred. Knowledge and skills: Basic computer skills: MS Excel & Word. Knowledge of general laboratory safety.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. Experience the opportunity to excel in a role that sets you on a path to becoming a quality engineering expert. At nVent Management Company, we are committed to nurturing your ambition, ensuring you can develop your skills in an environment dedicated to flawless execution and world-class standards. What you will experience in this position: As a Quality Technician, you will gain invaluable experience and contribute to our mission of achieving exceptional quality. You will: * Lead root cause problem-solving activities aimed at enhancing internal and external quality levels. * Perform process validations, in-process inspections, and quality monitoring of manufacturing processes and products. * Support design, manufacturing, and quality engineering functions through data collection, analysis, product reviews, and process capability assessments. * Develop and adhere to Quality Management Systems (QMS) objectives, and train personnel to align with QMS standards. * Conduct internal ISO standard audits and provide necessary audit support. * Prepare formal documented First Article Inspection (FAI) reports for both customer and internal use. * Identify and apply suitable measuring tools and equipment to confirm dimensional and functional requirements. * Communicate effectively across various departments such as Operations, Supply, Manufacturing Engineering, Design, Quality, Customer Service, Production Planning, and Logistics. * Lead or assist in maintaining the calibration status of inspection, test, and measurement equipment. * Perform other related duties as assigned. * No corrective actions or performance improvement plans within six (6) months of the job posting opening date. * No decision making leaves within 12 months of the job posting opening date. * Most recent performance rating achieves or higher. * Successfully completed six (6) months in current job bid classification OR current career advancement classification. Requirements: * High school diploma or equivalent experience. * American Welding Society (AWS) Certification as Certified Welding Inspector preferred. * Proficiency in reading blueprints; knowledge of Geometric Dimensioning and Tolerancing (GD&T) is a plus. * Interest in academic and career development preferred. * Minimum of 2 years of experience in quality. * Preferable experience with precision metal fabrication measurement tools and techniques. * Strong knowledge of charting and process control methods. * Familiarity with Quality Management Systems (QMS) is preferred. At nVent Management Company, you can make meaningful contributions that align with our high quality standards and ambitious goals, propelling your success in your role and beyond. WE HAVE: * A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day * At nVent, we believe safer systems ensure a more secure world. We connect and protect our customers with inventive electrical solutions. We design, manufacture, market, install and service high-performance products and solutions for mission-critical equipment, buildings and essential processes. Our solutions are helping build a more sustainable and electrified world. * We are a $3.3B company with a dedicated team of more than 11,000 employees around the globe. Our comprehensive portfolio of enclosures, electrical and fastening, and thermal management solutions dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, RAYCHEM and SCHROFF. * Commitment to strengthen communities where our employees live and work * We encourage and support the philanthropic activities of our employees worldwide * Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money * Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: * Innovative & adaptable * Dedicated to absolute integrity * Focused on the customer first * Respectful and team oriented * Optimistic and energizing * Accountable for performance * Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $20.40 - $37.80 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for full-time employees that includes: * Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. * A 401(k) retirement plan and an employee stock purchase plan - both include a company match. * Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth. #LI-Onsite #LI-TH1

As one of the largest OEM servicers in the country, Nationwide Auto Services, Inc. provides a varied mix of services. Performed by the extensively trained members or the NAS team, we can customize our systems to assist you most effectively. NAS is committed to providing the highest level of CUSTOMER SATISFACTION by supporting an array of SERVICES to the automotive industry. Our Team Members are highly skilled and receive continuous training to ensure all areas of SAFETY, QUALITY, and PRODUCTIVITY meet/exceed company and customer expectations. NAS is a dynamic, adaptable, flexible, and diverse service provider that takes great PRIDE in placing our customer needs first and ensuring environmental initiatives are complied with wherever our EXPERTISE is required. Join the Nationwide Auto Services team! Role: Quality Inspector Location: National City, CA Job Description: The position performs quality audits and detailed vehicle inspections on new vehicles. Job Duties: Perform vehicle inspections to OEM requirements. Use data collection tools to complete inspections and audits. Create reports and communicate findings. Perform vehicle repairs. Test drive new vehicles Qualifications and Requirements: Experience in quality audit processes, procedures, and validation activities on new vehicles. Ability to work with handheld Tablets and input data in App interfaces. Trained and knowledgeable with automotive tools and equipment. Must be responsible, reliable, and able to work under pressure. Must be self-motivated and able to conduct oneself professionally. TWIC may be required at certain locations. Must have a Valid Drivers License.

Join the world leader in thermal mass flow meter technology. FCI began in 1964 by pioneering the development and application of thermal dispersion flow and level sensing technology. The Company is the world-recognized leading manufacturer for solving flow and level measurement applications for industrial process and plant applications using patented thermal dispersion flow measurement technology. From off-the-shelf product solutions to custom engineered products and systems, FCI provides world leading experience and a record of unequaled innovation to meet or exceed our customer application demands. Complimenting FCI product leadership is a world class Flow and Level Calibration Facility in which all calibrations are performed in liquids or gases utilizing only N.I.S.T. traceable equipment and instrumentation. Position Purpose Under the direction of the Quality Assurance Manager, the Quality Inspector will maintain quality standards by approving incoming materials, in-process production, finished products, and recording each result. Excellent communication and leadership skills are a must, as well as keen attention to detail. Essential Job Functions (primary duties and outputs of position) * Inspect at receiving and in-process inspection. * Complete operation sheet with stamping and dating for controlled production. * Maintain lot traceability. * Interpret production schematics, specification and/or blueprints. * Perform final inspection of complex assemblies. * Administer prescribed inspection procedures, set up and checks. * Perform visual inspections on production bench-assembled components and subassemblies for conformance. * Predetermine electrical and/or mechanical standard, specification or tolerances. * Maintain gauges in working order and maintain work area. Requirements Safety * Follow safe work practices, participate in safety training as required, and report any unsafe conditions or accident. Quality * Employees are responsible to understand and support the quality policy and the appropriate elements of the quality management system for their areas of work, reduce, eliminate, and prevent quality deficiencies including escapes. * Initiate action to prevent the occurrence of nonconformities related to products, process, and quality system. * All employees have the responsibility and authority to identify quality deficiencies, elevate any concerns for action within or related to our quality system and processes. Communication * Communicate effectively in English, both verbally and in writing. * Maintain effective and constructive working relationships with others both internally and externally. * Prepare effective reports and presentation of departmental information. Education/Work Experience Requirements * Must have a high school diploma or GED. * 1 or more years of experience in manufacturing QA inspection or Associate's Degree. * Must be able to operate standard inspection devices and/or elementary testing equipment. * Must be able to document electronic invoices with an MRP system. * Must be able to read and understand wiring diagrams, schematics, blueprints. * Must be able to read and interpret drawings and follow verbal and written job instructions. * Able to pass IDC-J-STD-001 on IPC A610. * Experience working in a controlled environment where lot traceability is desired. * Computer experience (using Excel) for data collection. * Requires US citizenship or permanent resident status.

Job Description: Under direct supervision the Quality Technician I assures the Quality of Laird processes and products by performing audits, inspections, tests, supports defect investigation and analysis, first article sample submission (AS9102) and maintains high detail oriented documentation process for all internal processes as well as for Source Inspection Items that need to be presented to Customer. How will you do it • Assists periodic product audits/inspections on running parts and conduct final shipment audits utilizing AS9100 Standard as the basis for auditing. • Assists with system and process audits (supplier certification, internal system, subcontractor, comprehensive process, set up verifications, etc.). • Investigate and process quality problems to aid in their thorough resolution with support the Quality Engineer area. • Accurate and detailed ERP System / product transactions to maintain accurate inventory levels. • Acquires knowledge necessary to interpret internal and customer specifications to determine acceptable from reject able products. • Develop and maintain filing system of inspection records for manufactured products. • Update changes to customer specification criteria as directed. • Ensure all necessary inspection records accompany shipments including detailed documentation on products requiring Source Inspections. • Supports team when coordinating calibration of measurement equipment if required. • Assist Quality Assurance Engineers and Manager as needed. • Adheres to quality and safety systems or maintenance of quality and safety standards. • Perform other related duties and assignments as required. What we look for • Proficient in AS9100 Aerospace Standard is a plus, other related quality system standards (e.g., TS16949 etc.). Quality System Knowledge with background in Aerospace Products/Processes is highly preferred. • Proficient in First Article documentation and preparation (AS9102). • Ability to read and interpret blueprints with close attention to detail. • Ability to use precision measuring instruments (Caliper's, Micrometer's, Optical Comparator's, Faro Arm CMM is a plus, Pin Gauges, Drop Gauge, etc). • Ability to operate inspection/lab test equipment (such as OGP, hardness tester, etc) • Computer skills including spreadsheet, word processing, and database management software • Data analysis skills and problem-solving skills consistent with 8-Discipline technique • Good written and oral communication skills as well as good interpersonal and organizational skills. • Background in RF and or Electrical field is preferred. • Fundamental knowledge of mathematical concepts. • Must have good or corrected eyesight to insure quality of work and ability to lift and carry 20 pounds frequently EDUCATION / EXPERIENCE • High school diploma with additional technical courses, CQT or CMI preferred. • Minimum 5 year Quality Inspector experience in manufacturing and minimum of 2 years of Quality Technician Experience.

Scripps Mercy Hospital has served central and downtown San Diego since 1890 and is the oldest medical center in the county. The San Diego campus is located near the corner of 5th Avenue and Washington Street in Hillcrest. Scripps Mercy Hospital consists of two campuses in San Diego and Chula Vista. Scripps Mercy Hospital San Diego's campus includes the O'Toole Breast Care Center, a 24-hour emergency room that is a Level I Trauma Center, outpatient physical rehabilitation, minimally invasive robotic surgery and our childbirth unit (including a Level II neonatal intensive care unit). This exempt position is located at Scripps Mercy Hospitals in Hillcrest and Chula Vista. Join the Scripps Health team and work alongside passionate caregivers and provide patient-centered healthcare. Receive endless appreciation while you build a rewarding career with one of the most respected healthcare organizations nationwide. Why join Scripps Health? AWARD-WINNING WORKPLACE: * Selected as one of the 100 Best Places to Work for 2024 by Fortune Magazine and the Great Place to Work Institute for the 16th time. A remarkable achievement as only five healthcare organizations nationwide made the list, and Scripps is the sole healthcare provider in California to be recognized. * Recognized by Newsweek as one of America's Greatest Workplaces for Diversity in 2024. * Nearly a quarter of our employees have been with Scripps Health for over 10 years. * Ranked 78th in 2023 PEOPLE Companies that Care. * Ranked 95th in Fortune 100 Best Companies to Work for 2023 Scripps Mercy Hospital is San Diego's longest established hospital, and the only Catholic medical center with campuses in San Diego and Chula Vista. Our team of highly skilled and engaged health professionals provide exceptional patient care which we describe as the "Mercy style of care." We believe that the mind, body and spirit each play an integral part in the healing process, and we care for our patients and each other with that philosophy in mind. Join Scripps as Quality Coordinator, RN where you will: * Manage publicly reported and other significant quality measures and performance improvement in collaboration with administrative, clinical and physician leadership for their assigned service line. * Perform concurrent review of medical records for core measures and other clinical indicators based on established definitions and provides real time feedback and intervention with clinical staff and physicians to ensure optimal quality patient care. * Abstract records based on established indicators of the medical staff for peer review for assigned populations; facilitates the peer review process, ongoing physician performance review and decision support for medical staff reappointment. #LI-DP1 Required Education/Experience/Specialized Skills: * Minimum of 5 years direct patient care experience within the last 10 years or currently holding a coordinator/leadership level role within an acute care setting. * Requires attention to detail, analytical skills, excellent communication skills and intermediate computer skills. * Previous experience in quality improvement methods and tools required. * Knowledge of Core Measures or other publicly reported quality metrics required. * Familiarity with Joint Commission standards as they relate to Performance Improvement and/or Medical Staff Quality/Peer review strongly preferred. Required Certification/Registration: * CA RN required. Preferred Education/Experience/Specialized Skills/Certification: * Training and application of MIDAS or like-data based strongly preferred. * Bachelors degree strongly preferred. At Scripps Health, you will experience the pride, support and respect of an organization that has been repeatedly recognized as one of the nation's Top 100 Places to Work. You'll be surrounded by people committed to making a difference in the lives of their patients and their teammates. So if you're open to change, go ahead and unlock your potential. Position Pay Range: $57.65-$83.74/hour

Quality Control Inspector - Marine Corp Base Camp Pendleton Competitive Wages and Employer Paid Health Benefits! EMI Services is looking for a Quality Control Inspector. Primary responsibility of the Quality Control Inspector includes; inspection, monitoring, coordinating and compliance to the quality control program for all work performed by operations and maintenance staff consisting of all electrical, mechanical, HVAC equipment and associated systems (including, PM's and service work orders), alterations and repairs, and subcontractors to ensure that all requirements as specified in the Quality Control Program are achieved. The ideal EMI Quality Control Inspector has experience/training in electrical, mechanical, and HVAC/BAS control systems. Salary Starting at $65,000 (DOE) plus employer paid insurance! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities * Examine any of a variety of goods, services or operations for conformity to established quality, health, safety, legal, business, ethical or other standards * Verify that established standards are maintained relative to such matters as transportation methods; building and facilities maintenance and repair services * Verify that permits or licenses have been obtained and are displayed * Confer with officials, interpret regulations and codes and assist establishments in altering methods and practices to meet established standards * Investigate complaints, prepare report findings and action taken or recommended * Recommend changes in standards, administrative procedures, facilities, methods and practices * Inform QC Manager of all pertinent problems, irregularities, and other important information within area of responsibility * Perform other related duties as assigned

Rock West Composites, Inc. has an exciting opportunity for a Quality Inspector. This position is onsite at our San Diego-North location. Facility located at 7919 St Andrews Ave, San Diego, CA 92154. Rock West Composites, Inc. is an engineering and manufacturing company dedicated to providing innovative solutions for commercial and government customers. This position is located in our San Diego-North office and reports to our Quality Manager. Position Summary: The Quality Inspector inspects a range of components, parts and/or products for the area assigned as prescribed by all applicable specifications and quality assurance instructions. Inspector will identify moderate to difficult quality issues in design, process or other inefficiencies to meet quality requirements. Essential Function: Conduct detailed inspections of mechanical, metal, and composite materials, parts, and assemblies using precision measuring tools such as calipers, micrometers, height gauges, and mylars. Perform and document First Article Inspections (FAI) per AS9102 standards, including the creation of Forms 1, 2 & 3 and ballooning requirements (experience with DISCUS software is a plus). Perform final inspections, review customer requirements, and compile complete documentation packages. Support in-process inspections and monitor production area processes to ensure quality compliance. Accurately document inspection results, work instruction changes, and nonconforming conditions with clear, concise reports. Interpret mechanical and composite drawings, specifications, and requirements with a high degree of proficiency. Conduct receiving inspections for materials and parts outsourced for special processing. Participate in internal audits and cross-functional continuous improvement initiatives. Experience with Articulating Arm or CMM inspection using Verisurf is a plus. Non-Essential Functions: Other duties as assigned. Required Education and Experience: Prior experience in an aerospace manufacturing environment with AS9100 compliance. Strong knowledge of precision measurement tools and quality inspection techniques. Ability to work independently and lead a team in a fast-paced production environment. Excellent attention to detail and documentation skills. Experience with AS9102 First Article Inspections preferred. CMM and Verisurf experience is a plus. Perks and Benefits: 100% Employer Paid Medical and Dental Annual Bonus 401K - 5% match Employee Stocks Option Program 9/80 work schedule 8- paid Holidays PTO: Max. 4-weeks after 5 years of employment $2,500 tuition reimbursement ITAR Requirement This position requires the use of information which is subject to compliance with International Traffic Arms Regulations (ITAR). To conform to U.S. Government export regulations/ITAR, applicants must be a U.S. Citizen, lawful permanent resident of the U.S. (or, green card holder), protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Applicants cannot be hired until they are qualified to have such access. Some positions due to contracts will require current U.S. Citizenship. Compensation: The hourly range for this position falls within $24-$30. The final compensation will be determined based on experience, skillset, and other factors permitted by law. Why should you want to work with us? At Rock West Composites, we care about our employees! We offer exceptional benefits to our full-time team members, including 100% employer-paid Medical & Dental, Vision, Paid Time Off, and a 401K match. Plus, you'll thrive in our fun and friendly working environment! Rock West Composites is an Equal Opportunity Employer. It is the policy of the company to provide equal opportunity for all employees and applicants for employment without regard to race, color, creed, religion, gender, sexual orientation, national origin, age, marital status or any other basis prohibited by state or federal law. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of passing a required drug test and employee will become part of the random drug testing. Accessibility: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process and need an alternative method for applying, you may contact us at ************

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $26.00 to $27.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

The Task At-Hand: The Quality Lab Technician reports to the Quality Lab Manager and is integral to ensuring that all JuneShine products meet our high-quality standards. This role involves monitoring and recording data for quality checks throughout the brewing and packaging processes. Who You Are: You are a self-starter who thrives in a fast-paced environment. You are an excellent communicator with impeccable attention to detail and have a strong commitment to ensuring product quality. You will closely collaborate with our brewing and packaging teams, contributing to day-to-day problem-solving in the lab. You should also be enthusiastic about JuneShine Brands and eager to contribute ideas for improvement. In This Role You Will: • Assist in ensuring all product meets JuneShine Brands quality standards, including required analytical, sensory, microbiological, and packaging. • Perform daily tank checks to monitor temperature, head pressure, ABV, gravity, pH, titratable acidity (TA), and sensory. • Log data into appropriate spreadsheets and quality databases • Ensure timely performance of all quality control (QC) checks and approvals on the production floor. • Proactively identify out-of-trend data and assist in troubleshooting quality issues, including, but not limited to: fermentation delays, out-of-specification analytics, and sensory concerns. • Assist in performing microbiology testing of all products • Prepare media and sterile equipment for microbiological testing. • Maintain the finished product library for internal investigations and shelf-life evaluations. • Work closely with brewing and packaging teams to ensure all product quality standards are met. Must Haves: • Age 21 or older at the time of application • College degree in Microbiology, Chemistry, or a related field, or equivalent experience. • Minimum of one year's experience in a brewery or winery, with a fundamental understanding of pressurized systems, equipment cleaning (CIPs), yeast and/or bacteria handling, and safety protocols. • Willingness to work alternative workweek schedule: 4-day/10-hour shifts, between 6 AM and 10 PM, and availability for weekends when needed • Proficiency in college-level algebra • Proficiency in Excel • Desire to work in a fast-paced, growing company • Strong attention to detail • Experience with microbial identification Compensation: Full-Time, Hourly ($24.00), Non-Exempt Additional: • Paid Time Off • Healthcare Benefits; up to 90% contribution for employees and 25% for dependent medical. Voluntary vision, dental, and accidental plans offered • 401k with company match • 12 weeks paid Equal Parental Leave, $500 Baby Bonding Bucks, and sustainable baby gift • Product and Soft Good Perks • And so much more! Who We Are Our Purpose: To make quality, purpose-driven beverages Our Business: Our vision is to create the next-generation beverage platform, comprising distinct brands, each with its own ethos and purpose. Despite being a multi-billion dollar industry, it lacks options that cater to the next generation of drinkers who will demand more from their alcohol than a mere buzz. Disrupting this industry is a worthy, and massive opportunity. Our Culture: Our core values are Quality, Transparency, and Team-First. We derive much of our management policy from a book we give you upon hiring, ‘Let My People Go Surfing', by Yvon Chouinard (founder, owner, Patagonia). Our policy is to allow workers flexible hours, provided the work gets done with no negative impact on others. Our ‘let my people go surfing' policy demands that we hire very unique individuals; those with a combination of self-motivation, self-discipline, and energy. JuneShine Brands is a purpose-driven organization composed of a diverse and dynamic group of individuals with varied backgrounds, passions, and beliefs. We are committed to fostering an inclusive environment where everyone's unique perspectives are valued. We seek to hire self-motivated, independent thinkers, who embrace challenging the status quo. Join us at JuneShine Brands where you're encouraged to bring your authentic self to your craft every day. As a proud equal opportunity employer, we are dedicated to ensuring fairness and equity in our hiring practices. You must reside in the United States to be considered for this position.

Quality Control Technician - 250000KE Description Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Qualifications Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $26.00 to $27.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters. Job: Quality Control Primary Location: California-San Diego Organization: GM - SO CAL Schedule: Full-time Job Posting: Mar 5, 2025, 6:25:38 PM

The QC Technologist III is responsible for the execution of a broad range of bench test procedures used in raw material qualification, the testing of finished goods prior to release, the investigations of product performance, and for conducting routine validation studies, as well as assisting with routine maintenance of the Quality Control (QC) laboratory. The QC Technologist III works with cross-functional teams to resolve product performance issues and maintenance of QC Standard Operating Procedures (SOP) in compliance with applicable regulations and ISO standards. Additionally, QC Technologist III supports investigations and assists in trending and statistically analyzing finish product testing data. Responsibilities Key Accountabilities Essential Functions: Perform and organize testing of biological raw materials and finished goods per relevant SOP with minimal supervision; subject matter expertise in at least one product line. Assist with planning of method, product and process validations on existing products; perform and organize testing as needed. Perform testing and prepare reports as required for environmental monitoring or investigation of out-of-specification results, as required. Perform testing and assist with preparation of reports for various special projects as deemed necessary by technical review team. Responsible for tracking relevant trends. Maintain proper laboratory housekeeping and supply levels in the QC laboratory, including submission of purchase requisitions and inventory adjustments. Document all test results and maintain product release records (including electronic records). Document existing product/process validation test results (including electronic records). Maintain product testing database and perform relevant statistical analyses associated with product specifications as specified in laboratory SOPs. As required, coordinate and assist with investigation and resolution of complaints, non-conforming material and product performance issues. Submit complex change orders to update procedures as required. As required, work cross-functionally to investigate and resolve issues deriving from finish product testing. Ensure and maintain compliance with the Company's quality system requirements through training and adherence to policies, procedures and processes. Other duties as assigned. Qualifications Minimum Knowledge & Experience Required for the Position: High school diploma required; Bachelor's degree in Science or equivalent experience preferred. A minimum of four (4) years previous Quality Control lab (QC) and/or Quality Assurance (QA) experience required; previous experience within a regulated medical device manufacturing or In-Vitro Diagnostic Device (IVDD) strongly preferred. Thorough understanding of Good Laboratory Practices (GLP) required. Practical experience with laboratory controls, internal audits, and lab training/maintenance. Phlebotomy certification a plus. Knowledge of FDA-GMP/QSR and ISO standards for quality. Excellent written and verbal communication skills. Ability to work independently and as part of a team. Proficiency with common laboratory techniques, such as pipetting and use of balances. Proficiency with Microsoft Office suite. Proficiency with Large Enterprise Resources Planning (ERP) and Laboratory Information Management (LIMS) systems preferred.

Join the world leader in thermal mass flow meter technology. FCI began in 1964 by pioneering the development and application of thermal dispersion flow and level sensing technology. The Company is the world-recognized leading manufacturer for solving flow and level measurement applications for industrial process and plant applications using patented thermal dispersion flow measurement technology. From off-the-shelf product solutions to custom engineered products and systems, FCI provides world leading experience and a record of unequaled innovation to meet or exceed our customer application demands. Complimenting FCI product leadership is a world class Flow and Level Calibration Facility in which all calibrations are performed in liquids or gases utilizing only N.I.S.T. traceable equipment and instrumentation. Position Purpose Under the direction of the Quality Assurance Manager, the Quality Inspector will maintain quality standards by approving incoming materials, in-process production, finished products, and recording each result. Excellent communication and leadership skills are a must, as well as keen attention to detail. Essential Job Functions (primary duties and outputs of position) Inspect at receiving and in-process inspection. Complete operation sheet with stamping and dating for controlled production. Maintain lot traceability. Interpret production schematics, specification and/or blueprints. Perform final inspection of complex assemblies. Administer prescribed inspection procedures, set up and checks. Perform visual inspections on production bench-assembled components and subassemblies for conformance. Predetermine electrical and/or mechanical standard, specification or tolerances. Maintain gauges in working order and maintain work area. Requirements Safety Follow safe work practices, participate in safety training as required, and report any unsafe conditions or accident. Quality Employees are responsible to understand and support the quality policy and the appropriate elements of the quality management system for their areas of work, reduce, eliminate, and prevent quality deficiencies including escapes. Initiate action to prevent the occurrence of nonconformities related to products, process, and quality system. All employees have the responsibility and authority to identify quality deficiencies, elevate any concerns for action within or related to our quality system and processes. Communication Communicate effectively in English, both verbally and in writing. Maintain effective and constructive working relationships with others both internally and externally. Prepare effective reports and presentation of departmental information. Education/Work Experience Requirements Must have a high school diploma or GED. 1 or more years of experience in manufacturing QA inspection or Associate's Degree. Must be able to operate standard inspection devices and/or elementary testing equipment. Must be able to document electronic invoices with an MRP system. Must be able to read and understand wiring diagrams, schematics, blueprints. Must be able to read and interpret drawings and follow verbal and written job instructions. Able to pass IDC-J-STD-001 on IPC A610. Experience working in a controlled environment where lot traceability is desired. Computer experience (using Excel) for data collection. Requires US citizenship or permanent resident status. Salary Description $21 - $25 per hour

Responsible for reviewing digital files, proofs, and overlays to ensure content is built to required specifications and precise to established internal expectations, documented tolerances, print industry standards, procedures and/or published direction. Evaluate and review cards, provide direction for print accuracy or improvement. Quality Control is an extension of Prepress Production and works closely with a variety of internal departments to ensure quality and fiscal responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES The following statements are intended to describe the general nature of the level of work being performed by an individual assigned to this job. Other duties may be assigned. * Review print design engineering, product content, printability and make recommendations to ensure quality standards are attained. * Assessed delivered information and implementation of direction received from designated Lead, Project Manager(s), Marketing, Legal, Design, Sports & Entertainment, Operations and written documentation from mechanicals, briefs, and costing documentation. * Ensure the highest possible quality of files produced within lithographic pre-production environment. Quality Control Technician(s) will maintain a global view of these production procedures and make on-going recommendations to ensure tolerances are maintained and quality product files produced. * Effective communication skills required demonstrate close mindfulness with organized practices. Responsible for interacting daily with Digital Operations Team Lead, Project Manager(s), Prepress Production personnel and Designers.' * Support and adhere to internal Creative Departmental procedures and requirements to include but not limited to, assisting Prepress Production during production heavy cycles. * Proficiency in the following software or systems: Adobe Creative Suite, MS Office, and Excel. * Hands-on, energetic and motivated self-starter with the ability to work additional hours as required. INTERACTION This position will interact closely with the Director of Creative, Digital Operations Production Manager, Project Managers, Prepress Production, Designers, and other internal personnel. EDUCATION/YEARS EXPERIENCE * High School Diploma or equivalent. College Degree with an emphasis in Graphic Arts a plus. * 1-2 years of experience in Prepress or related area, publishing, or relevant duties. * Knowledge of Kodak Prinergy is a plus. REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE, SKILLS AND ABILITIES * Present understanding of Prepress and Print Industries' standards, competent knowledge of established production tolerances. Familiarity with the 4/c process, to include, but not limited to: spot colors, varnish, foil, die cuts, deboss and/or embossing. Imposition software skills with a basic understanding of file standards for print production (bleed, trapping, color separation, resolution, etc.). * Minimally an intermediate knowledge of Mac and applied software with verified results, fundamental knowledge of ripping and trapping of digital files through a Prinergy Workflow. The qualified applicant must possess acceptable computer skills; a working knowledge of Adobe Creative Suite is a plus. Additionally, basic to intermediate proficiency in the following software: Microsoft Word, Excel, and Outlook. * Strong oral and written communication skills demonstrate close mindfulness with organized practices. Ability to articulate clearly with internal partners and not be afraid to ask questions. * Effective organizational skills with the ability to manage multiple, high priority projects with dedicated attention to detail. * Demonstrated ability to read, comprehend written instructions and follow pre-established guidelines. * Utilize technology and maximize efficiency: Maintain education and ability of innovative techniques, technologies, and software capabilities. On an on-going basis, ensure we are maximizing our technology resources and making recommendations for improvements. * Excellent interpersonal, problem solving and troubleshooting skills. * Professional demeanor; collaborator orientation. * Ability to perform duties under minimal supervision while exercising reasonable discretion and independent judgment. * Manage time effectively, prioritizing duties and meeting deadlines. Ability to maintain flexible work hours. Work hours are mostly consistent, but production requirements require flexibility. * Knowledge of the following areas would be desirable: NHL, Football and Basketball, and/or historical knowledge of pop culture, including comics and films spanning a multitude of trends. * Hands-on, energetic and motivated self-starter

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. You will provide quality assurance support aligned to increase internal and outgoing quality levels, supporting overall customer satisfaction of our products. Key job responsibilities * Performs basic and routine receiving, in-process, and final product inspections and testing. * Determines and uses appropriate measuring tools and equipment to verify dimensional and functional requirements. * Participates in problem solving activities for both product and manufacturing processes. * Performs basic process and product monitoring for quality. * Performs containment activities preventing potential or additional quality defects * Assists with product reviews and analysis to determine root cause and/or disposition; supports processing non-conformances (NC) to closure. * Performs FAI as directed, and reports results. * Effectively communicates with appropriate areas as needed (supply, manufacturing, engineering, quality, customer service, production planning, logistics, etc.). * Provides process audit support in designated areas. * Assists in basic calibration of inspection, test, and measurement equipment. * Observes all applicable safety rules and reporting any unsafe conditions or potential safety hazards. * Responsible for managing the ESN label database, including creating and revising labels for accuracy. * Performs other related duties as assigned. Qualifications and Experience * High school diploma or G.E.D. Bachelors in technical field preferred. * Ideally 1+ years experience working in quality preferred. * Ideally 1+ years experience using measurement tools and techniques preferred. * Strong mechanical aptitude. * Ability to use common measuring equipment (e.g., Calipers, micrometer, paint mil gauges, go / no-go gages, etc.). * Ability to understand and use work instructions and procedures, and complete forms. * Good written and verbal communication skills. * Skills to quickly learn and operate a wide variety of test and measurement equipment. * Skills in attention to detail and accuracy. * Ability to apply basic math and geometry. * Skill in using personal computers including Microsoft Office applications (Word, Excel, Outlook, etc.). * Ability to operate hand tools. * Ability to lift up to 50 lbs. * Ability to stand and walk frequently. * Experience with Quality Management Systems preferred. WE HAVE: * A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day * At nVent, we believe safer systems ensure a more secure world. We connect and protect our customers with inventive electrical solutions. We design, manufacture, market, install and service high-performance products and solutions for mission-critical equipment, buildings and essential processes. Our solutions are helping build a more sustainable and electrified world. * We are a $3.3B company with a dedicated team of more than 11,000 employees around the globe. Our comprehensive portfolio of enclosures, electrical and fastening, and thermal management solutions dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, RAYCHEM and SCHROFF. * Commitment to strengthen communities where our employees live and work * We encourage and support the philanthropic activities of our employees worldwide * Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money * Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: * Innovative & adaptable * Dedicated to absolute integrity * Focused on the customer first * Respectful and team oriented * Optimistic and energizing * Accountable for performance * Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for full-time employees that includes: * Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. * A 401(k) retirement plan and an employee stock purchase plan - both include a company match. * Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Quality Control Inspector - Marine Corp Base Camp PendletonCompetitive Wages and Employer Paid Health Benefits! EMI Services is looking for a Quality Control Inspector. Primary responsibility of the Quality Control Inspector includes; inspection, monitoring, coordinating and compliance to the quality control program for all work performed by operations and maintenance staff consisting of all electrical, mechanical, HVAC equipment and associated systems (including, PM's and service work orders), alterations and repairs, and subcontractors to ensure that all requirements as specified in the Quality Control Program are achieved. The ideal EMI Quality Control Inspector has experience/training in electrical, mechanical, and HVAC/BAS control systems. Salary Starting at $65,000 (DOE) plus employer paid insurance! See ALL the fantastic benefits you receive as an employee of EMI below!! Key Responsibilities Examine any of a variety of goods, services or operations for conformity to established quality, health, safety, legal, business, ethical or other standards Verify that established standards are maintained relative to such matters as transportation methods; building and facilities maintenance and repair services Verify that permits or licenses have been obtained and are displayed Confer with officials, interpret regulations and codes and assist establishments in altering methods and practices to meet established standards Investigate complaints, prepare report findings and action taken or recommended Recommend changes in standards, administrative procedures, facilities, methods and practices Inform QC Manager of all pertinent problems, irregularities, and other important information within area of responsibility Perform other related duties as assigned Requirements High school diploma or equivalent 2+ years of similar experience as well as experience or training in electrical, mechanical, and HVAC/BAS control systems Regular, dependable attendance Valid driver's license Pass a pre-employment drug screening and background check U.S. citizenship to Obtain and maintain access to military installations Preferred Qualifications Bachelor's degree or equivalent amounts of training and experience is preferred Physical Requirements Carrying objects/boxes/print-outs short distances Extensive work with a computer May require lifting and moving as much as 50 pounds with assistance as needed Use of hands, reaching with hands and arms, talking, and walking Prolonged periods of sitting, bending, squatting, standing, twisting, or stooping Climbing ladders and entering confined spaces Work both indoors and outdoors in various temperatures (some extreme) and weather conditions *Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Click here to follow EMI Services on Facebook Benefits As a team member at EMI, you'll enjoy: Generous benefits package Health Care Plan (Medical, Dental & Vision) Retirement Plan (401k, IRA) Life Insurance (Basic, Voluntary & AD&D) Paid Time Off (Vacation, Sick & Federal Holidays) Employee Stock Ownership Plan (ESOP) Short Term and Long Term Disability Term Life Insurance What Sets EMI Apart EMI is an industry-leading provider of DOD base operation support services, facilities maintenance, and logistics. Our goal is to contribute to the repair and maintenance of buildings and equipment. EMI consistently delivers cost-saving through best value innovations and quality service that exceeds our clients' expectations. The Right Partner: EMI has grown by gaining our customers' trust and our employees' loyalty. We've successfully performed over 60 service contracts and we understand the unique challenges facing today's military. We offer exceptional responsiveness and a strong commitment to customer satisfaction. We demonstrate this commitment by consistently earning some of the highest customer satisfaction ratings in the industry. The Right Team: The EMI team includes over 250 high-achieving professionals, administrative and trades personnel deployed in various locations throughout the United States. At times, we augment our in-house capabilities with proven and capable business partners. The Right Approach: EMI brings vast expertise and proven solutions to augment our clients' operations. We provide a platform that delivers seamless mission support and exceptional customer service in a very cost-effective and repeatable solution. #emiservices