Quality Control Inspector Jobs in Raritan, NJ

Unitek Technical Services provides supplier management, development, and related technical services to corporations around the world. JOB DESCRIPTION: Aerospace Source Inspector Requirements include but are not limited to: The ability to perform product source inspections including in-process, final, and first article inspections per AS9102 and customer requirements. Experience with hands-on dimensional inspection is required. The ability to read and understand complex engineering drawings, specifications, geometric dimensions and tolerances per ANSI/ASME Y 14.5. The ability to perform mechanical measurement for verifying the compliance of complex machined, formed, cast, forged, and assembled aircraft structures. Additional Notes: It is needed to support Source Inspection activity at customer-supplier locations. (Trenton, New Jersey and occasionally to Long Island NY) Ability to Travel Start Date: Upon Approval Frequency of visits: 20-30 hours a week Computer skills required. W2 Contract; US Citizenship

Arcadia is looking for NAS410 Certified NDT UT Level 2s with experience inspecting composites. Automated UT systems knowledge is a plus for it Tallassee, AL location. The NDT Level 2 should be thoroughly familiar with the scope and limitations of the methods for which qualified; with specific strengths working within aerospace inspection requirements and should expect to exercise assigned responsibility for on-the-job training (OJT). The NDT Level 2 shall be able to organize and report the results of NDT tests. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned: Performs and maintains written quality requirements associated with Arcadia procedure manual and Customer requirements. Establishes work instruction and technical data sheets for set-up and processing of inspection programs. Submits data to Level III for approval. Accepts or rejects the customers' products based on standards provided and records and reports specific inspection data. Interprets and implements customer specifications and standards. Directly assists in the training and qualification of trainees and Level I personnel through on-the-job training practices as defined by Level III. Expands and increases knowledge of the applicable NDT method and/ or other methods not qualified for in preparation of qualification for Level I, II or III certification as applicable. QUALIFICATIONS To perform this job successfully, an individual shall have sufficient education, training and experience to ensure qualification in Ultrasonic Testing. Previously certified to UT Level 2 or certifiable to Level 2 per the requirements of NAS 410, i.e., a Level 1 UT certification and an additional 40 hours of formal training (for a total of 80) in UT, and an additional 200 hours of UT on the job experience (for a total of 800) or a trainee with at least 80 hours of formal training in UT, and at least 800 hours of on the job experience. High School diploma or equivalent. REQUIRED SKILLS Ability to utilize mathematical formulas. Ability to follow verbal and written instructions. Ability to follow safety regulations. Computer literate with emphasis on Microsoft Word, Excel and PowerPoint. Ability to read and understand technical documents relating to the applicable method. High level of interpersonal communication skills. Assist in the maintaining of the KAIZEN 6S discipline. SORT: Eliminate everything not required for the current work, keeping only the bare essentials. STRAIGHTEN: Arrange items in a way that they are easily visible and accessible. SHINE: Clean everything and find ways to keep it clean. Make cleaning a part of your everyday work. STANDARDIZE: Create rules by which the first 3 S's are maintained. SUSTAIN: Keep 5S activities from unraveling SAFETY: Eliminate hazards Utilize material handling equipment Ability and willingness to cross train other NDT methods If required. Ability to work effectively with others and in a team environment. Flexible to work any shift and overtime as required. PHYSICAL REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands, handle, or feel; stoop, kneel, crouch, or crawl; and talk or hear. The employee is occasionally required to climb or balance. The employee must frequently lift and/or move up to 50 pounds assisted or unassisted, and occasionally move up to 100 pounds with assisted. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. MENTAL REQUIREMENTS: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine technical reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. WORKPLACE ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; and vibration. The noise level in the work environment is usually loud. Full benefit package PTO, vacation, major medical, dental, vision, 401k, GTL, STD, LTD offered. The intent of this position description is to provide a representative summary of the major duties and responsibilities performed by individuals assigned to this position. Individuals may be required to perform other tasks other than those specifically presented in this description. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change.

Mantell Associates is partnered with a leading Cell Therapy CDMO in their search for a new Senior Quality Control Specialist to join their organisation. Senior Quality Control Specialist - Responsibilities: Assist with the collection and production of samples to evaluate quality Interpret blueprints for the purpose of establishing customers' critical needs and how they should be measured Conduct routine and non-routine analyses of in-process materials, raw materials, environmental samples, finished goods, or stability samples Assist with the quality inspection process of new part samples and record the data Check dimensions and surface quality of random batches of finished products to ensure they meet all company quality standards Assist with inspection all product returns, analyse the defect, and document the findings Verify all processes are conforming to established quality standards and required customer specifications Senior Quality Control Specialist - Requirements: A Bachelor's degree in science or business-based programs Previous experience in production or manufacturing Experience in business administration may be advantageous Strong attention to detail, observation, organisational, and leadership skills Mantell Associates is a specialist Pharmaceutical and Life Sciences headhunting firm. For more information on this role, please contact us at +44 (0)20 3854 7700.

QC Laboratory Associate Contract Allentown, PA $23/HR - $24/HR (Depending on Experience) Tuesday through Saturday, 8:00 am to 4:30 pm Responsibilities Perform sterility testing, environmental monitoring, and growth promotion of media in a cleanroom. Conduct LAL endotoxin testing, including sample prep, sterilization, incubation, and machine processing. Follow Good Documentation Practices (GDP) and manage paper-based lab records. Execute batch release testing to ensure product sterility and quality. Support EO sterilization, preparing biological indicators, cleaning samples, and incubating them for testing. Requirements: 4-year degree in the sciences background is required for this role. Previous experience with proper GDP, Good Documentation Practices will be helpful. ISO 8, clean classified Lab - no computerized systems for EM, a lot of paperwork Micro lab-good GMP skills, pays attention to detail, scanned and

Immediate need for a talented Quality Control Analyst 2. This is a 12+ Months Contract opportunity with long-term potential and is located in Fortwashington, PA (Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID:25-63901 Pay Range: $35 - $40.70/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Compiles and analyzes data on reoccurring product defects to determine root cause. Documents analysis results. Analyzes raw material inspection logs for consistent failures. Notifies purchasing and quality departments about suppliers that have provided inferior products. Studies work processes, measurements and performance metrics to identify improvement areas. Recommends new or modified procedures based on findings. Interfaces with customers, suppliers and associates to define and improve quality standards and expectations. Participates on process improvement teams. Monitors and scrutinizes internal and external complaints and compiles data to be used in reports. Performs analyses in order to determine compliance with specifications using a wide variety of chemical, biological and physical standard procedures. Key Requirements and Technology Experience: Skills-Compiles and analyzes data on reoccurring product defects to determine root cause. Documents analysis results. Analyzes raw material inspection logs for consistent failures. BACHELOR'S DEGREE MUST Generally Requires 2-4 Years Work Experience. University/Bachelors Degree or Equivalent Our client is a leading Healthcare Industry and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication, and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe, and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 65 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. In addition, MACOM offers foundry services that represents a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives, and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Title: Quality Control Inspector As a Quality Inspector, you will be responsible for verifying all required documents that are involved/required with the parts/products you are inspecting. Document any non-conformances in detail on the Company's Q-note system. This includes all areas of quality control, incoming inspection, in-process inspection and final inspection. When not working with the microscope, you will be verifying measurements with handheld measuring tools. Key Responsibilities: * Perform incoming inspection, in-process inspection, first article inspection and final inspection of electronic and mechanical components with little to no assistance. * Schedule source inspections as required. * Generate internal and external reports. * Generate and maintain data for the control of documentation, effectively report information, and accurately respond to questions from team members, internal suppliers, and customers. * Communicate non-conformances and work with Quality and Manufacturing to drive corrective actions. Ensure all incoming, in-process and final materials meet specifications. * Perform routine SAP transactions to move, disposition, and route material. Key Competencies & Skills Required: * Safe handling of ESD sensitive materials. * Working knowledge of SAP, Agile, Excel, MSWord and Outlook. * Ability to prepare oral and written reports clearly and concisely. * Excellent internal and external communication skills. * Advanced understanding of quality control standards and testing techniques. * Knowledge of statistical sampling techniques. * Able to lift up to 20 pounds. * Able to sit for periods of time working with a microscope. Required Qualifications and Experience: * High School diploma (or equivalent) or AS degree (preferred). * Minimum 2 years Quality Control inspection experience (preferred). * Self-motivated with the ability to evaluate complex issues in a high-pressure environment. * Knowledge of all aspects of inspection and testing. * Experience with Mil-PRF-38534, class H & K; Hybrids, Mil-STD-883; methods 2008, 2009, 2010, 2017 Semiconductors and Passive devices. * Knowledge of IPC-600 and 610, J-STD-001. * Knowledge and experience in performing mechanical and electronic inspections. * Ability to work from technical drawings, sketches and specifications. * Due to ITAR regulations, U.S. citizenship or permanent residency required. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: Reasonable Accommodation. MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process, please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Job Details Somerset - Somerset, NJ Full Time $19.00 - $21.00 QA - Quality ControlDescription Do you love candy and snacks? Are you looking to join an ever evolving and rapidly growing team? PIM Brands might just be exactly what you're looking for! At PIM, we make the brands you love. Our portfolio of products, from Welch's Fruit Snacks to Sun-Maid Chocolate Raisins and Sour Jacks Sour Candies are enjoyed by millions of consumers every day. And when it comes to careers, we seek talented, results-oriented individuals who want to play a part in building amazing brands and products while working in a collaborative, dynamic, and fast-paced office environment. At PIM, you can make an immediate and lasting contribution to help grow iconic snack and confectionery brands, no matter your area of expertise. We are looking for a Quality Control Inspector interested in starting a SWEET career as part of our Quality Control team at PIM's Somerset site in New Jersey. JOB OVERVIEW Performs and documents routine testing on incoming materials, in process and finished products. Reject product in non-conformance. Report food safety and quality problems to Plant Management and SQFP to initiate action. Instructions shall be available setting out how all tasks critical to meeting customer specifications; the maintenance of food safety, quality, and process efficiency is to be performed. ESSENTIAL JOB FUNCTIONS Report food safety and quality issues to Plant management and SQFP Follow PIM Brands GMP rules Monitor fellow employees for adherence to GMPs. Ability to work additional hours as needed Kitchen/Mogul Inspector: Overseeing production processes to ensure adherence to process parameters and specifications. Inspects in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Temperature of product at different stages of production. Perform Brix (refractometer) analysis. Perform pH analysis (pH meter). Perform organoleptically testing for colors and flavors. Obtain samples of starch, product after curing, and bulk retains for laboratory analysis. Performs calibration of pH meter and refractometer. Gather samples for retain and Microbiology. Perform visual, sponge swab, and ATP testing after equipment is cleaned and sanitized. Perform line inspection and clearance. Inspect products to ensure that they meet quality standards. Document inspection outcomes by completing detailed reports and performance records. Communicate the results of inspections and put forward corrective suggestions. Place on hold and document any nonconforming materials, products and equipment. Clean, organize and maintain QC workstations. Approve or reject reworked items. Conduct GMP inspections to ensure compliance. Monitor, verify and document Critical Control Points (CCP) for Food Safety. Recommend improvements to the production process to ensure quality control. Teach the production team about quality control concerns to improve product excellence. Resolve quality-related issues in a timely manner. Packaging Inspector: Overseeing packaging processes to ensure adherence to specifications. Perform and document metal detector test to assure its proper function. Record Temperature and Relative Humidity of the Packaging room. Weigh pouch samples for all machines and document. Verify that all codes and expiration dates are correct. Verify that all pouches and cases coincide with each other and product packaged. Verify Empty Pouch Reject System. Reject any product out of specification. Approve or reject reworked items. Perform visual, sponge swab, and ATP testing after equipment is cleaned and sanitized. Perform line inspection and clearance. Conduct GMP inspections to ensure compliance. Monitor and verify Critical Control Points (CCP) for Food Safety. Approves finished products by confirming specifications, conducting visual and measurement tests, returning products for re-work, and confirming re-work. Teach the production team about quality control concerns to improve product excellence. Resolve quality-related issues in a timely manner. Panning Room Inspector: Overseeing production processes to ensure adherence to process parameters and specifications. Inspects in-process production by confirming specifications, conducting visual and measurement tests, communicating required adjustments to production supervisor. Perform and Record Temperature and Relative Humidity of different areas. Record the temperature of the product at different stages. Weigh pieces of product before and after coating. Record the weight of cases packaged. Perform the metal detector test. Perform visual, sponge swab, and ATP testing after equipment is cleaned and sanitized. Perform line inspection and clearance. Gather samples for retain, Microbiology, and laboratory analysis. Reject and document any product out of specification. Verify Critical Control Points and Critical Quality Points. Recommend improvements to the production process to ensure quality control. Teach the production team about quality control concerns to improve product excellence. Resolve quality-related issues in a timely manner. Shipping & Receiving Inspector: Inspect and approves incoming materials by confirming specifications, conducting visual and measurement tests, and rejecting and returning unacceptable materials. Verify that the Certificate of Analysis is provided by the Supplier and FDA documents have been released for imported products. Document inspection outcomes by completing detailed reports and entering data in the computer system. Release or Reject in the ERP Infor M3 system. Communicate quality-related deficiencies to Purchasing for resolution. Resolve quality-related issues in a timely manner Qualifications PHYSICAL DEMANDS Standing, walking, sitting, bending, reaching, kneeling and crouching. Manual dexterity of hands and fingers to handle or feel objects, tools and controls. Lifting and moving of objects weighing 15 lbs. Reasonable accommodations will be evaluated and considered to enable an individual to perform the essential job functions. WORK ENVIRONMENT Job will generally be performed in the manufacturing plant. When on the plant floor it is representative of a large, busy manufacturing operation. Noisy, active, objects on the floor, constant movement and traffic flow of motorized equipment. Hair net, beard net, assigned work uniform, protective eye wear and gloves are among the GMP required apparel that must be worn, if indicated, on the plant floor. EDUCATION, SKILLS and EXPERIENCE High School Diploma or GED is strongly preferred, Associates Degree in science discipline preferred. Basic math and general knowledge of Microsoft Office is p

Paragon Staffing, LLC is a company that specializes in connecting job seekers with employers who are seeking temporary, contract, or permanent positions. The Quality Control Packaging Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the QC Packaging Technician is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. Candidates with previous food manufacturing background are strongly encouraged to apply! Responsibilities/duties: Examine packaged products to ensure they meet specific quality standards, including weight, dimensions, appearance, and labeling. Ensure that all packaging materials and processes comply with relevant industry regulations and standards, such as FDA regulations for food packaging or ASTM standards for materials. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Requirements: 2+ years of experience as a QC Inspector (required) High school diploma or equivalent qualification. Certification in quality control is preferred.. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. Shift Availability 2nd Shift: 2PM to 10:30PM 3rd Shift: 10PM to 6:30AM Pay Rate: $22/hr-24/hr. Location: Monroe, New Jersey 08831

Delivering mission-critical, electronic solutions that protect lives. Use your creativity and critical thinking to take our products from concept to customer. At CAES, we engineer solutions for the world's most critical missions. We serve customers in the defense and aerospace markets. Seeking a career that offers challenging, diverse projects and opportunities? Looking for a position with a company that offers long-term professional advancement? Searching for a place that values a diverse, team-based environment? One that values YOU. Consider CAES. The most important thing we build is TRUST Overview If you want just a job then you are in the wrong place. However, if you want a career experience then read this posting Our employees are mission driven and proud of the world-class products they design and manufacture, pioneering the future of many of the world's most critical defense missions. As a people focused organization, we empower our employees to drive excellence in all that they do. Are you ready to take on exciting challenges and help support world class technology for our Armed Forces? Do you have a solid background in Quality, are you seeking more than just another Job and want to help create the future? If so, then we want to hear from you for a role as Quality Inspector at CAES Mission Systems, Lansdale PA. The Inspector will perform a variety of tasks, such as; visual inspection, mechanical and dimensional inspection, print reading, interfacing with all levels of personal; engineering, management and customers, verifying work instructions and specifications including specific call out per the drawing. Responsibilities Works from drawings, process sheets, engineering change orders and written and verbal instruction to inspect mechanical parts, electronic subassemblies and assemblies against required quality standards (i. e. , solder, electrical bonds, component placement, plating, etc. ) Utilizes standard precision tools such as micrometers, Vernier's, gauges, optical comparator, coordinate measuring machines and/or other specialty instruments to measure dimensions where tolerances may be exacting and parts are intricate in nature. Perform calculations to determine angles, tolerances, dimensions and other specified measurements Identifies defects against drawing specifications and specified control limits per drawing requirements. Inspects parts, subassemblies and assemblies after rework, modifications or repairs have been corrected. Submit and support Source Inspections (Customer & Government [DCMA]) Performs simple setups of inspection equipment Applies inspection stamp for acceptability of mechanical and electrical parts, subassemblies and assemblies. May perform final inspection prior to customer acceptance to ensure end product meets customer requirement. Interfaces with engineering regarding technical issues and contributes in problem resolution Performs field return evaluations to ensure returns are repaired within quality guidelines Confirm processes are being accurately completed per policies and procedures currently in place. Qualifications Minimum: High School Diploma or Accredited GED Minimum 1 year related experience in Electronic (IPC-related) and Mechanical Inspection This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U. S. Government export license). Ability to obtain and maintain a security clearance. Preferred: High School Diploma or Accredited GED Minimum 2 years' related experience in Electronic (IPC-related) and Mechanical Inspection Associates Degree or Technical Certification, highly preferred Expert understanding of Mil-Specs, IPC, & J-STD-001 requirements IPC-610, IPC-620, IPC-J-STD Certification. Experience with AS9100D Experience in defense contract and/or microwave electronics Excellent collaboration and communication skills Demonstrated Team Player Microsoft Office Suite proficiency Salary Range: Quality Inspector I: $18. 52/hr to $25. 95/hr; Quality Inspector II: $20. 41/hr to $29. 62/hr. Applicable pay within the posted range may vary based on factors including, but not limited to, geographical location, job function of the position, education, and experience of the successful candidate. CAES provides a variety of benefits including health insurance coverage, life and disability insurance, 401K, paid holidays and vacation. EMPLOYMENT TRANSPARENCY BENEFITS We take care of our people and provide competitive health, wealth and wellbeing benefits - from day one. You'll also discover learning and development opportunities so you can take your career to the next level - and beyond. Other benefits include: Comprehensive PTO, Paid Holiday and Paid Family Leave Programs. Student Loan Repayment Program & Tuition Reimbursement 9/80 Alternate Work Week Schedule Tailored Management/Leadership Training Innovative Medical Programs, Including Family Forming ABOUT CAES CAES is the largest provider of analog and radiation hardened technology for the United States aerospace and defense industry. From human spaceflight and space exploration, to missile defense and electronic warfare, to healthcare solutions addressing COVID-19, our talented team develop high performing electronic solutions that work the first time, every time. WE ARE AN EQUAL OPPORTUNITIES EMPLOYER At CAES we welcome differences and celebrate new ideas. We believe the diversity of our people inspires our creativity and drives our innovation. Everyone is welcome here, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or genetic information. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation due to a disability for any part of the employment process, please email CAEScareers@caes. com.

Country: United States of America Onsite At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world. What You Will Do: The position is for an onsite Quality Inspector. The Quality Inspector is responsible for ensuring that products and processes meet established quality standards. This role involves conducting inspections, testing products, and maintaining accurate records. The ideal candidate has a strong background in quality control, excellent attention to detail, and the ability to work collaboratively with other functions. This role will support the Receiving Inspection team located ONSITE at Princeton, NJ . What You Will Do: * Perform inspections of incoming materials, in-process products, and finished goods. * Interpret and adhere to quality standards, specifications, and procedures. * Use measurement tools and equipment to verify product dimensions and quality. * Document inspection results and maintain detailed records. * Identify and report defects, deviations, and non-conformities. * Collaborate with engineering and production teams to resolve quality issues. * Participate in root cause analysis and corrective action processes. * Participate in Material Review Board (MRB) meeting. * Assist in developing and updating inspection plans. * Support continuous improvement initiatives to enhance product quality. Qualifications You Must Have: * A University Degree or equivalent experience and minimum 5 years prior relevant experience, or An Advanced Degree in a related field and minimum 3 years experience. * The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance. Qualifications We Value: * Proficient in reading and interpreting engineering drawings and specifications. * Strong knowledge of quality control principles, tools, and techniques. * Experience with measurement tools such as calipers, micrometers, and gauges. * Experience with using a microscope. * Experience working with optical components (lens, windows, etc.). * Excellent attention to detail and problem-solving skills. * Strong communication skills, both verbal and written. * Ability to work independently and as part of a team. Working Conditions: The role may require working with a microscope for extended periods and handling small, delicate components. What We Offer Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation. Not Relocation Eligible - Relocation assistance not available Learn More & Apply Now! Please consider the following role type definition as you apply for this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role is 72,000 USD - 144,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

Inspects in process and finished products for conformance to specifications using fixed or preset measuring instruments. Checks for irregularities and ensures products conform with established tolerance levels for quality and performance. Documents all instances of non-conformance and rejected products in production reports. Prepares required inspection certifications. REPORTING TO Quality Manager ESSENTIAL JOB FUNCTIONS Inspect in process and finished product as required by established procedures. Accurately document the results of inspection and testing results. Perform careful inspections and enforcements of Quality Standards. Maintain all controlled document files of the inspections and testing results. Document and report product or service quality levels. Collaborate with Quality Team Members to solve problems. Maintain records of measuring devices to ensure compliance to standards of QAP, AS9100 and ISO9001. Evaluate problems and make recommendations for possible corrective actions. Monitor critical equipment and instrumentation to ensure proper operation. SKILLS and ABILITIES Good written and verbal communication skills. Knowledge of ISO9001 and AS9100 management systems. Ability to read blueprints and understand GD&T. Working knowledge of measurement instruments. Knowledge of Microsoft Office applications. Strong attention to detail and the ability to follow verbal and written communications. EDUCATION and EXPERIENCE High school diploma or GED equivalent required. Minimum 1 year experience working with quality hand tools, such as calipers, micrometers, gages, etc. Ability to lift to 20 pounds. Vision and depth perception suitable for use of inspection equipment. EEOC Statement: MW Industries, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Medical Device QC Inspector Your responsibilities The QC Inspector will be responsible for performing inspection on medical devices to specified requirements to determine product disposition. Will operate in accordance with company procedures, FDA Regulations, ISO 13485 and Canadian Medical Device Regulations, and other applicable requirements. Responsibilities: Essential Duties · Perform mechanical, visual, packaging and document Inspection of orthopedic medical devices · Complete all required documentation of the inspection results, on handwritten forms, and electronic spreadsheets or databases, in accordance with company procedures and work instructions. · Identify and document potentially non-conforming product. · Ensure non-conforming product is properly segregated and quarantined. · Interface with other departments, to address and resolve any product related issues. · Assist with labeling of product and label reconciliation. · Perform line clearance to ensure that product integrity is maintained. · Read, understand, and follow company procedures and policies. Skills and Qualifications: · Educational Requirements: High school diploma/GED (Required) o Associate's Degree (Desired) · Working knowledge of use of various gauges such as calipers, micrometers, thread gauges, etc. · Knowledge of quality practices, FDA Regulations and ISO 13485. · Knowledgeable of inspection techniques. · Basic understand of reading engineering drawings. · Good verbal and written communication skills. · Strong attention to detail and accurate record keeping. · Basic computer skills including a word processing, and spreadsheet, etc. · Must be flexible and able to adapt to changes in priorities. · Must be able to occasionally lift up to 25 lbs.

Gwynedd Manufacturing, a growing defense contractor located in North Wales, PA, is a state-of-the-art manufacturing facility dedicated to producing quality products for the U.S. Department of Defense and various U.S. Federal Law Enforcement Agencies. As an innovative company offering a wide array of products, we strive to continuously develop new technology and drive process improvement. The Quality Inspector is responsible for reviewing products and materials during and after manufacturing to make sure they meet company requirements. Duties include measuring objects compared to their intended physical specifications, running quality tests and identifying defects. Requires understanding of fundamental mathematics including basic geometry, making precise measurements with appropriate gauges, and basic understanding of part handling and movement. Responsibilities Check parts for visual defects and anomalies at any point in the manufacturing value stream, including vendor-supplied operations or products Use supplied gages and measuring equipment to ensure parts conform to all stated requirements Secure/quarantine parts that don't meet quality standards for further review Sort conforming and nonconforming parts to support on-time delivery to customers Perform inspections on purchased products to assess vendor quality Perform inspections at random on the production floor to assess manufactured part quality Requirements High school diploma or equivalent. Basic math skills. Less than or up to 1 year experience as an inspector or quality assurance employee in a manufacturing environment. Gwynedd Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties and responsibilities. Management reserves the right to assign or reassign duties to this job at any time. Benefits Medical - IBC Dental - The Standard Insurance Company Vision - IBC - included in medical premium Company Paid Life Insurance - The Standard Insurance Company Group Additional Life and AD&D Insurance-The Standard Group Short and Long Term Disability Insurance- The Standard 401 (k) w/ match - Aon (VOYA) (90 Days after full-time hire) Paid Time Off (PTO) 10 Company Paid Holidays Complimentary breakfast and lunch everyday for all employees

The Quality Control Inspector is responsible for the measurement and visual inspection of material to ensure internal and external customer quality requirements are met. Uses prints, checklists, and various measuring devices. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Completes all required inspections at various points of the manufacturing process including receiving, production cutting, assembly, etc., packaging, storage, and shipping. Principle Duties and Responsibilities Records measurements and other critical data in appropriate manner. Identifies acceptable tolerances according to prints and other documents and ensures operations remain within acceptable tolerances. Stops production and/or other operations and notifies proper personnel and management upon discovery of nonconformances. Assists in investigation of all quality issues and/or occurrences and ensures that corrective measures are implemented. Prepares various reports and correspondence as required. Performs other duties as required. Qualifications Bachelor's degree in business management or quality management or related discipline or equivalent experience is required 1-2 years of management or quality assurance experience preferred Working knowledge of Microsoft Office Applications including Excel, Word, and Outlook The Company is an Equal Opportunity Employer.

Needs to make sure that products being produced meet the expectations of the consumer. They examine jobs to make sure they meet quality expectations then assess the final product after production. Their role is to establish an acceptable variation range for jobs and identify when something fails to meet those requirements. Responsible for monitoring and ensuring that each stage of production is followed by all the necessary procedures and each product coming out of the production process. Document the results of their inspections and make recommendations on how to prevent common errors. Responsible for ensuring the quality control of all printing and sign products as well as packaging and shipment/delivery of all products. Responsible for checking in all vended products and ensuring they are ready for delivery or shipment. Duties and Responsibilities ● Must have attention to detail on quality and packaging for all outgoing shipments. ● Must be very organized while maintaining the ability to multitask. ● Coordinate with shipping companies like FedEx, UPS and others and ensure timely delivery. ● Work effectively with the center manager and sales team for quality delivery and escalations. ● The job requires repetitive lifting of sometimes heavy boxes. ● Must be a team player, dependable and have a good work ethic. ● Good written and verbal communication skills ● Excellent problem-solving and analytical skills ● Keen attention to detail ● Basic computer and math skills to calibrate and measure specifications ● Ability to use measuring devices like scales and tape measures ● In-depth understanding of company standards ● Understanding of target market and consumer needs ● Documentation and reporting skills ● Teamwork and collaboration ● Comfortable standing or walking for long periods of time Some cross training into bindery or other areas of the company will be required at times if another teammate is out. Experience Entry Level Job Full time Print Smith, Shipleap and Microsoft Office knowledge is a huge plus. Compensation: $15.00 per hour At AlphaGraphics, we offer careers for everyone! Whether you are just starting out, looking for that next great growth opportunity, or seeking a change, we have exciting roles to suit you. We pride ourselves on our training programs in management, sales, operations, print, signs, design, and marketing. Join us with or without experience, and we will succeed together as a team! We invite EVERYONE to apply! *AlphaGraphics centers (locations) are independently owned and operated. The posted positions are offered by individual franchisees who interview, hire, manage and pay the employees hired for positions in a specific local location (center) through their specific business.

In this position, you will maintain quality standards by approving incoming materials, in-process production, finished products, and recording the results. Excellent communication skills are a must, as well as a keen attention to detail. Ensure products meet specific quality standards throughout their handling and storage. Effective warehouse quality assurance helps reduce errors and discrepancies in inventory management, enhancing operational efficiency. Must be able to stand for an extended period of time Must be able to lift 50 pounds Be able to work independently and make good use of time Must have basic computer skills and knowledge of warehouse management systems Must be able to inspect product and ensure quality product is being shipped Responsible for identifying any quantity discrepancies before orders leave the facility Ability to identify and communicate non-conforming product or situations that could lead to undesirable results or client satisfaction concerns Maintain a clean and organized work environment Bring forward opportunities for improvement Ability to use a calculator along with basic math skills apply in person @ 700S Broad St Trenton

Contract Allentown, PA $23/HR - $24/HR (Depending on Experience) Tuesday through Saturday, 8:00 am to 4:30 pm Responsibilities: Sterility testing of biological indicators in a clean room, performing environmental monitoring, growth promotion of media, and LAL testing. Previous experience with proper GDP, Good Documentation Practices will be helpful. The lab has many forms and is paper intensive. Batch release testing EO sterilize products, put in biological indicators, they are in the syringes those get sent to the lab then wrap and clean, clean room, and then incubate them LAL testing - update and duplicate, prep samples, different kits, needle types mostly big things - disassemble, put in beaker then in water for sterilization let it incubate then run through the machine Requirements: 4-year degree in the sciences background is required for this role. Previous experience with proper GDP, Good Documentation Practices will be helpful. ISO 8, clean classified Lab - no computerized systems for EM, a lot of paperwork Micro lab-good GMP skills, pays attention to detail, scanned and

Delivering mission-critical, electronic solutions that protect lives. Use your creativity and critical thinking to take our products from concept to customer. At CAES, we engineer solutions for the world's most critical missions. We serve customers in the defense and aerospace markets. Seeking a career that offers challenging, diverse projects and opportunities? Looking for a position with a company that offers long-term professional advancement? Searching for a place that values a diverse, team-based environment? One that values YOU. Consider CAES. The most important thing we build is TRUST Overview Join CAES as a Quality Inspector in Lansale, PA Ready to ensure the highest standards in advanced electronics and aerospace? At CAES, we're seeking a meticulous Quality Inspector who can guarantee our products meet rigorous quality benchmarks. Your keen eye and dedication will play a pivotal role in supporting our mission to innovate and excel in defense and aerospace technologies. If precision and excellence are your forte, we want you on our team! Responsibilities Works from drawings, process sheets, engineering change orders and written and verbal instruction to inspect mechanical parts, electronic subassemblies and assemblies against required quality standards (i. e. , solder, electrical bonds, component placement, plating, etc. ) Utilizes standard precision tools such as micrometers, Vernier's, gauges, optical comparator, coordinate measuring machines and/or other specialty instruments to measure dimensions where tolerances may be exacting and parts are intricate in nature. Perform calculations to determine angles, tolerances, dimensions and other specified measurements Identifies defects against drawing specifications and specified control limits per drawing requirements. Inspects parts, subassemblies and assemblies after rework, modifications or repairs have been corrected. Submit and support Source Inspections (Customer & Government [DCMA]) Performs simple setups of inspection equipment Applies inspection stamp for acceptability of mechanical and electrical parts, subassemblies and assemblies. May perform final inspection prior to customer acceptance to ensure end product meets customer requirement. Interfaces with engineering regarding technical issues and contributes in problem resolution Performs field return evaluations to ensure returns are repaired within quality guidelines Confirm processes are being accurately completed per policies and procedures currently in place. Qualifications Minimum: High School Diploma or Accredited GED Minimum 2 years related experience in Electronic (IPC-related) and Mechanical Inspection This position requires access to technology, materials, software or hardware that is controlled by US export laws. In order to be eligible for this position, you must be a "US Person" under US export laws (or eligible for approval under a U. S. Government export license). Ability to obtain and maintain a security clearance. Preferred: High School Diploma or Accredited GED Minimum 2 years' related experience in Electronic (IPC-related) and Mechanical Inspection Associates Degree or Technical Certification, highly preferred Expert understanding of Mil-Specs, IPC, & J-STD-001 requirements IPC-610, IPC-620, IPC-J-STD Certification. Experience with AS9100D Experience in defense contract and/or microwave electronics Excellent collaboration and communication skills Demonstrated Team Player Microsoft Office Suite proficiency Salary Range: Quality Inspector II: $20. 41/hr to $29. 62/hr. Sr. Quality Inspector: $22. 96/hr to $33. 32/hr. Applicable pay within the posted range may vary based on factors including, but not limited to, geographical location, job function of the position, education, and experience of the successful candidate. CAES provides a variety of benefits including health insurance coverage, life and disability insurance, 401K, paid holidays and vacation. EMPLOYMENT TRANSPARENCY BENEFITS We take care of our people and provide competitive health, wealth and wellbeing benefits - from day one. You'll also discover learning and development opportunities so you can take your career to the next level - and beyond. Other benefits include: Comprehensive PTO, Paid Holiday and Paid Family Leave Programs. Student Loan Repayment Program & Tuition Reimbursement 9/80 Alternate Work Week Schedule Tailored Management/Leadership Training Innovative Medical Programs, Including Family Forming ABOUT CAES CAES is the largest provider of analog and radiation hardened technology for the United States aerospace and defense industry. From human spaceflight and space exploration, to missile defense and electronic warfare, to healthcare solutions addressing COVID-19, our talented team develop high performing electronic solutions that work the first time, every time. WE ARE AN EQUAL OPPORTUNITIES EMPLOYER At CAES we welcome differences and celebrate new ideas. We believe the diversity of our people inspires our creativity and drives our innovation. Everyone is welcome here, regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or genetic information. We are committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation due to a disability for any part of the employment process, please email CAEScareers@caes. com.

Paragon Staffing, LLC is a company that specializes in connecting job seekers with employers who are seeking temporary, contract, or permanent positions. The Quality Control Packaging Technician will play a critical role in ensuring products are packaged correctly and meet quality standards before they are shipped to customers. The primary objective of the QC Packaging Technician is to identify and rectify defects or deviations from established quality criteria to maintain high product quality. Candidates with previous food manufacturing background are strongly encouraged to apply! Responsibilities/duties: Examine packaged products to ensure they meet specific quality standards, including weight, dimensions, appearance, and labeling. Ensure that all packaging materials and processes comply with relevant industry regulations and standards, such as FDA regulations for food packaging or ASTM standards for materials. Keep detailed records of inspections, testing results, and any deviations from the quality standards up-to-date and maintained. Reject all products and materials that fail to meet quality expectations. Identify opportunities for process improvement and suggestions on changes to enhance efficiency and product quality. Investigate the root causes of quality issues, collaborate with cross-functional teams, and recommend corrective and preventive actions to prevent future occurrences. Maintain open and effective communication with production staff, quality assurance teams, and management to ensure everyone is aligned on quality goals and expectations. Prioritize safety in the manufacturing environment, ensuring that quality control activities are carried out safely and in accordance with safety protocols. Other duties as assigned. Requirements: High school diploma or equivalent qualification. Certification in quality control is preferred. A minimum of 2 years' experience in a similar role. Excellent knowledge of MS Office. Good math, technical, and communication skills. Strong understanding of quality control standards and testing techniques. Shift Availability 2nd shift and 3rd shift (ONLY) Pay Rate: $22/hr-24/hr. Location: NOTE: ***This job opening is in Monroe, New Jersey