Quality Assurance Technician Jobs in Winter Gardens, CA

(QA) Process Validation Specialist San Diego, CA 12 month initial contract We are seeking a highly skilled QA Process Validation Specialist to join our team in San Diego. This role plays a key part in establishing and maintaining pharmaceutical manufacturing processes while ensuring compliance with regulatory standards. The successful candidate will utilize engineering principles, technical writing, and statistical methods to generate evidence that supports the safety and consistency of active pharmaceutical ingredients (APIs). As a member of our dedicated team, you will represent the quality organization in cross-functional teams. Key Responsibilities: Process Validation Documentation: Draft, review, and approve process validation protocols and reports for APIs, ensuring they align with established procedures. Periodic Process Review: Conduct Annual Product Quality Reviews for approved APIs and perform continuous statistical analysis of processes. FMEA Risk Assessment: Assist in generating FMEA Risk Assessments to support Critical Process Parameters for Process Validation Reports. Cross-Functional Collaboration: Work closely with process development, manufacturing, and quality teams to ensure manufacturability, as well as support scale-up and technology transfer for manufacturing processes. Cleaning Validation Program: Assist with cleaning validation efforts to ensure compliance with relevant guidelines. Equipment & Environmental Monitoring: Review and approve documentation related to Equipment Validation and Environmental Monitoring. Compliance and Additional QA Duties: Operate under cGMPs and perform other Quality Assurance duties as required. Qualifications (Education & Experience): Required Education: Bachelor's degree in Chemistry, Biochemistry, Engineering, or a related field. Experience: Minimum of 5 years of experience in pharmaceutical manufacturing or a regulated environment. Skills & Competencies: Technical Skills: Strong knowledge of FDA, EU, and global GMPs (including Good Automated Manufacturing Practices, 21 CFR Part 11, and EU cGMP Annex 11). Experience with Analytical Software (e.g., Minitab). Soft Skills: Ability to manage multiple tasks and priorities simultaneously, collaborate effectively across organizational boundaries, and demonstrate operational excellence.

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. Role Description The Quality Inspector performs incoming inspection, in-process inspections, and final inspections of components and assemblies per control/quality plans. The Quality Inspector will review and approve final release documentation. Performs incoming inspections per control/quality plans for received materials. This role will also complete appropriate quality records within company and GMP guidelines, policies and procedures. Roles and Responsibilities: Inspect incoming or production materials for conformance to engineering drawings, schematics, and specifications; process standards and specifications; and production or process plans. Perform incoming test of components. Monitor for conformance to design or test specifications or standards. Accept or reject materials or articles; identify and document non-conformance and notify appropriate personnel of potential rejection of items. Refer/document unusual inspection problems to supervision, lead or Project Quality Engineer. Know using a variety of measuring tools including electrical test sets, multimeter, fixed, limit, plug-gages, steel rules, scales, micrometers, calipers, and surface plate. Assist in the writing and updating of inspection procedures, protocol, and checklists. Transferring, releasing or quarantining material physically according to inspection status Documenting and maintaining inspection and test records Understand the importance of product conformity. Understand lot numbers and traceability. Understand ISO 13485 quality assurance standards and the related documentation in support of. Maintains safe and clean work environment by keeping shelves, workstations, etc. neat and complying with procedures, rules and regulations. Complete respective paperwork/documentation. Education: Minimum of High School Diploma and two years or more working experience in a relevant, cGMP/FDA regulated industry. Required Knowledge & Experience: Be able to read and understand mechanical drawings and dimensions Be able to read and interpret drawing notes and able to understand configuration management (revision control) Be able to use basic measuring tools such as calipers, go-no/go gauges, torque wrenches, and others as necessary Experience with electrical test sets, multimeter, vision measuring system is a plus Experience working with an ERP system and data entry Experience with Outlook and MS Office. Good communication and organizational skills. Must possess good math fundamentals, comprehend written work instructions, and communicate well. Knowledge of medical device manufacturing Working understanding of GDP and GMP Excellent documentation skills, attention to detail and accuracy Team player, flexible multitask, good written/oral communicator Must be organized and able to coordinate activities with internal departments and outside vendors

We are seeking a highly skilled Lab Support Engineer to provide technical support for project and product lifecycles, including Radio Access Network (RAN), GPS, Timing/Reference signal distribution, and Device Automation Test Platforms. This role involves troubleshooting, documentation updates, lab equipment maintenance, and ensuring optimal test environments. The ideal candidate will have strong RF, digital, and automation expertise, along with experience in lab operations and test equipment. Principal Duties and Responsibilities Project & Product Support Provide technical support for RAN, GPS, signal distribution, and automation test platforms from development to deployment. Maintain and update documentation, design changes (hardware/software), and sustain project lifecycles. Conduct analysis to identify, troubleshoot, and debug technical issues related to RF, analog, and digital applications. Utilize spectrum/digital modulation analyzers to validate and troubleshoot RF signals. Calculate path loss for coaxial cables and RF signal distribution networks. Stay current with 5G NR, 4G LTE, and other 3GPP standards. Create and update procedures using Confluence and SharePoint. General Lab Support Troubleshoot technical issues with minimal guidance and execute test plans, failure analysis, and debugging. Operate General Purpose Test Equipment such as spectrum analyzers, signal generators, and cable testers. Configure and manage engineering lab machines, PDUs, and DNS services. Install and upgrade Windows software/tools on lab workstations. Maintain benches, racks, and cabling (coaxial & Ethernet) to ensure an organized lab environment. Document Standard Operating Procedures (SOPs) for equipment and processes. Ensure compliance with housekeeping and safety standards. Required Skills & Competencies Strong troubleshooting and problem-solving skills in RF, analog, and digital applications. Experience with 5G NR, 4G LTE, and other 3GPP standards. Ability to calculate RF path loss and work with signal distribution networks. Proficiency in using spectrum analyzers, signal generators, and modulation analyzers. Strong knowledge of lab automation, test execution, and failure analysis. Effective verbal and written communication skills for technical documentation and team collaboration. Ability to work independently with minimal supervision. Strong organizational and multitasking abilities in fast-paced environments. Preferred Qualifications Associate's degree in Computer Science, Electrical Engineering, Mathematics, or related field. CET certification or 2+ years of electronics coursework. 5+ years of experience with general computer skills and Microsoft applications. 3+ years of experience in the semiconductor or related industry. 2+ years of experience in a large matrixed organization. 3+ years of leadership experience (with or without direct reports). Level of Responsibility Works independently with minimal supervision. Communicates complex technical information to diverse audiences. Requires critical thinking and problem-solving in troubleshooting technical issues. Involves some strategic planning and process improvement initiatives.

Travel Nurse Across America Nursing is seeking a travel Cath Lab Technologist for a travel job in National City, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Duration: 13 weeks 40 hours per week Shift: 8 hours, days Employment Type: Travel We're looking for a Cardiac Catheterization Technologist (Cath Lab Tech) for an immediate travel opening in National City, CA. The right Cath Lab Tech must have 1 year of experience. Read below for additional requirements. Cath Lab Techs assist doctors during advanced diagnostic and interventional cardiac procedures such as cardiac catheterization, peripheral vascular procedures, and structural heart procedures in the Cardiac Catheterization Lab. Scrubbing, monitoring and assisting providers as requested. As a Cath Lab Tech, you will be responsible for: Preparing the Cardiac Lab procedure rooms by ensuring adequate stock is available and in working condition, including instrument sterilization if applicable. Preparing patient and equipment for cardiac lab procedures by preparing site of entry, draping patient, arranging sterilized instruments and catheters, and calibrating and setting up pressure transducers and tubing. Operating and ensuring the quality control of all equipment utilized in the cardiac cath lab. Knowledge of all related equipment within the laboratory. Scrubbing in during procedures, assisting the physician in maneuvering catheters. Obtaining and recording hemodynamic, electrical, and angiographic data by operating-hemodynamic and electrical amplifiers and digital and line fluoroscopic equipment. Monitoring the patient's hemodynamic status during procedures in the cardiac cath lab. Participating in life-saving measures such as defibrillation and cardiopulmonary resuscitation. Cath Lab techs should be able to stand and walk for long periods of time, as well as bend, lean or stoop without difficulty. Must have 1 year of experience. The Cath Lab Tech must have BLS, ACLS, ARRT (R) -CI preferred or CCI-RCIS certification, and state specific licensing when required. Requirements*: ARRT, CCI, BLS, 2 Years * Additional certifications may be required before beginning an assignment. TNAA Job ID #1209639. Pay package is based on 8 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Nursing Catheterization Technologist - CathLab Technologist - Travel About Travel Nurse Across America Nursing At TNAA, we take pride in doing things differently. We place our healthcare travelers on high-paying assignments in exciting locations across the country, but it's our service before, during and after your assignment that sets us apart. Our dedicated, supportive staff understands how stressful preparing for a travel assignment can be, and that's why we put our experience to work for you to remove the headaches and send you smoothly on your way. Across our recruiting, clinical, quality assurance, payroll and housing teams, we promise to go out of our way to offer you an exceptional customer service experience. You may be a temporary employee of the facilities you serve, but when you travel with us, you become a permanent part of the TNAA family! Some of the benefits you receive with TNAA: Guaranteed Pay - Many contracts allow a hospital to call off a set amount of shifts without penalty to the hospital. When that occurs to a traveler on contract with TNAA, their per diems are not affected. Paid Sick Leave - Sick leave, in all 50 states, begins accruing from your first day, and you're eligible to use it after 90 days of employment. Travel Reimbursement - We offer up to $1,000 in travel expense reimbursement. Your Way is Paid - TNAA pays for all costs associated with getting the licenses and certifications needed for your assignment. Housing - Get the most out of your housing subsidy with our Easy Stay program or utilize our company provided housing. Insurance - We offer liability, vision, dental and health from day one. More of what we offer can be viewed on our website at: *********************

GQR Healthcare-Allied is seeking a travel Cath Lab Technologist for a travel job in National City, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional Start Date: ASAP Duration: 13 weeks 36 hours per week Shift: 12 hours, days Employment Type: Travel GQR Healthcare is representing a well-known health system seeking experienced Catheterization Laboratory providers to add to their team. If you are passionate about providing exceptional care and looking to explore a rewarding career opportunity, we'd love to hear from you! Apply now, and a dedicated GQR consultant will connect with you to discuss the role, answer your questions, and guide you through the process. About GQR Healthcare: At GQR Healthcare, we are committed to supporting healthcare professionals at every stage of their careers. When you partner with us, you gain access to a wide range of benefits and support, including: Day 1 Benefits: Enjoy comprehensive healthcare coverage, including medical, dental, and vision plans, starting on your first day. Guaranteed Hours: We provide contract stability by offering guaranteed hours, ensuring you have the predictability you need. Continuing Education & Development: We invest in your growth by offering opportunities for professional development and ongoing education. 24/7 Consultant Support: Our dedicated consultants are available around the clock to assist with any needs or questions you have. Seamless Placement Process: We handle all the details, from onboarding to interviews, so you can focus on what you do best - providing exceptional patient care. Partnering with GQR means more than just finding your next job - it's about building a meaningful career with a team that truly supports your goals. GQR Allied Job ID #234067. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: TECH - Catheterization Laboratory About GQR Healthcare-Allied GQR's Healthcare team specializes in connecting experts within the industry to highly skilled healthcare professionals across the US market. In the competitive healthcare market, we recognize that the industry's common goals of improved quality of care and patient outcomes are wholly reliant upon the professionals directly supporting these initiatives. Leveraging our extensive candidate network, we deliver continuity of care for the communities our partners serve to ensure the patient experience is of the highest quality. Through deep market specialization and a unique approach to talent acquisition, GQR Healthcare provides an unparalleled and personalized experience across all medical specialties in nursing and within diverse healthcare platforms across the industry.

Vivian is looking for Travel Cath Lab Technologist Allied Health Professionals in National City, California paying up to $2,556/week At Vivian, we ensure your next step is a step forward. That's why we built a jobs marketplace that serves healthcare professionals first. It's easy to get started: Create a profile - Build your reputation with a universal profile that works across hundreds of different healthcare employers. Explore your options - Select your preferences (shift details, salary, location, etc.) and discover jobs most relevant to you. Talk on your terms - Message multiple employers while keeping all communication in one, convenient place. Qualifications and Skills: * Graduate from an accredited school * Ability to practice in the state of California Your Vivian profile is a new way to find the best job opportunities. Sign up and see your opportunities in minutes!

Trustaff Allied is seeking a travel Cath Lab Technologist for a travel job in National City, California. Job Description & Requirements Specialty: Cath Lab Technologist Discipline: Allied Health Professional 40 hours per week Shift: 10 hours, days Employment Type: Travel As a Cath Lab Tech, you'll be the primary resource for technical aspects of cardiac catheterization procedures, angioplasties, and electrophysiology. Cath Lab Technicians work as a critical part of the cath lab team, so you must be well-versed in reading and interpreting EKG readouts. Trustaff Allied Job ID #834058. Pay package is based on 10 hour shifts and 40 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Cath Lab Technician About Trustaff Allied Our traveler-first attitude has set us apart from other travel healthcare agencies When you join the Trustaff family, you're more than just a body filling a role-you're a vibrant individual with dreams and aspirations. As one of the nation's leading travel healthcare companies, your recruiter will work with you one-on-one to guide your career and help you achieve your goals. You decide when and where you want to work Enjoy industry-leading pay, benefits, and bonuses Experience new people and places Grow your clinical skills and expand your experience Travel healthcare lets you take your professional career to the next level while maintaining your flexibility and freedom. At Trustaff, we put you first, so you never have to compromise your work or pay. We are proud to have one of the highest nurse retention rates in the country. Some of the other reasons people choose us include: Priority access to thousands of travel healthcare jobs Industry-leading pay Guaranteed weekly hours Experienced recruiters Comprehensive benefits, including medical, dental, and vision 401k with employer match Assistance with travel, compliance, and housing Great bonuses for completions, referring friends, and more Benefits Dental benefits Medical benefits Vision benefits Guaranteed Hours

We are seeking a skilled Lab Technician with hands-on experience in soldering and assembling fine-pitch PCBs and intricate wiring. The ideal candidate will have 1-2 years of experience working with delicate electronic components, ensuring high-quality workmanship and precision. This role is critical to supporting our engineering and manufacturing teams in prototyping, testing, and assembling electronic systems. Key Responsibilities: Perform fine-pitch soldering on PCBs, including surface mount and through-hole components. Assemble and wire intricate electronic systems following schematics, diagrams, and work instructions. Inspect and troubleshoot PCB assemblies for defects, ensuring compliance with quality standards. Use microscopes, soldering irons, rework stations, and other lab tools to complete precision work. Assist engineers in prototype development, modifications, and testing of electronic assemblies. Maintain accurate documentation of assembly processes, test results, and inventory tracking. Adhere to ESD (Electrostatic Discharge) safety protocols and lab best practices. Requirements: 1-2 years of experience in fine-pitch soldering, PCB assembly, and precision wiring. Proficiency in using soldering irons, rework stations, and microscopes for detailed work. Ability to read and interpret electronic schematics and technical drawings. Familiarity with IPC soldering standards (e.g., IPC-A-610 or J-STD-001 certification is a plus). Strong attention to detail and ability to work with small components under magnification. Basic understanding of electrical circuits and testing methods. Ability to work independently and collaboratively in a fast-paced lab environment.

Job Title: Laboratory Technician Position Type: Full-time Experience Level: 2-5 years experience in a laboratory environment Benefits: Medical, dental, vision, life insurance, 401k, and paid vacation. JOB SUMMARY Carry out multiple tasks in a wet chemical laboratory including cleaning glassware and materials hardware, building components for battery test cells, basic electrical wiring, building and operating hardware fixtures, running routine mechanical tests, data collection (written and via computer data acquisition), and maintaining an organized working environment in a fast-paced environment. DESCRIPTION Become a critical member of our fast-growing team working to develop a breakthrough battery technology to change the way batteries are made and used worldwide to enable a greener future. In this position, you will be a critical part of our core team, helping with day-to-day operations and progressing the development and manufacturing of advanced battery cells. We are looking for a skilled, dependable, and detail-oriented Laboratory Technician, to join our team in the Bay Park area of San Diego, CA. In this role you will help support personnel on necessary tasks including cleaning glassware and materials hardware, inspecting parts for quality and conformity, building battery test cells, basic electrical wiring, building and operating hardware fixtures, running routine mechanical tests, data collection, and maintaining an organized working environment. The ideal candidate can work independently following standard operating procedures, is thorough in their tasks, and is able to effectively communicate in a dynamic environment. Work will primarily be in a wet lab environment and candidate should be able to comfortably and safely handle a variety of chemicals, tools, and equipment. RESPONSIBILITIES Support scientists and engineers with preparation, setup, assembly, testing of various tasks. Follow and edit procedures to test and/or assemble components into battery cells. Be able to setup data acquisition equipment (DAQ) that includes thermocouples, pressure transducers, etc. Operate basic machining tools such as band saw, drill press, etc. Operate mechanical test systems for routine testing of new materials and components. Good practices in making detailed observations and accurately and comprehensively recording data. Operate laboratory equipment such as gloveboxes, multimeters, high pressure regulators, etc. Maintain an organized and functional laboratory workspace with general lab duties such as, but not limited to, organizing and stocking laboratory consumables, electrical wiring, cleaning, etc. Follow protocols for safe handling of materials and chemicals. Work with engineers in building and maintaining equipment and test fixtures. Operate 3D printing equipment, organize and order printing consumables. Other duties deemed necessary by the company. Deliver epic High Fives. REQUIREMENTS 2-5 years of experience working in a laboratory environment. Familiarity with chemical and hazardous material handling best practices. Familiarity with basic electrical wiring, soldering. Ability to prioritize, multi-task, and succeed in an environment with competing demands. Ability to perform repetitive work according to established procedures. Basic machining experience (drill press, band saw, sanding) Ability to lift 35 lbs. Stand for extended periods of time Dexterous - able to safely grasp, move, or assemble small objects Proficiency using Microsoft Office products An aptitude for learning new things and a keen eye for improving processes At the time of posting, the expected starting salary range for this role is $20 - $30/hour annually. The actual pay depends on multiple individualized factors, including education, job-related knowledge, experience, and skills, which will be assessed during the interview process. The comprehensive compensation package for this position may also include other elements, such as health benefits, 401k, and company stock options. The base pay range and package is subject to change and may be modified in the future. ABOUT SOUTH 8 TECHNOLOGIES South 8 Technologies, Inc. is a fast-growing and well-funded group backed by leading global organizations. We have developed a breakthrough new Liquefied Gas Electrolyte chemistry for next generation lithium batteries. Our patented technology enables a substantial increase in energy, improved safety, and an exceptionally wide operating temperature. Leveraging conventional materials and manufacturing, South 8 Technologies offers a unique solution for a variety of e-mobility, energy storage, and industrial applications. South 8 Technologies, Inc. was founded in 2015 and spun out of UC San Diego's Jacobs School of Engineering. We are a diverse team, which values integrity and hard work in an environment that encourages creative thinking, collaboration, and honest feedback. Become a critical member of our team and grow alongside us as we transform the energy landscape. JOB APPLICATION Candidates may apply by sending resume to ******************************. Candidates only - we will not respond to inquiries from third-party recruiters. South 8 Technologies is an equal opportunity employer.

Entry Level Lab Technician Duration: 6Months Contract with possible extension Pay Rate: $25/hr Job Description: Onsite 5 days a week College grads are acceptable The Manufacturing Technician I is a versatile role, responsible for independently performing all tasks ensuring high-quality service levels are met. Responsible for preparing and maintaining buffer solutions used in various laboratories and manufacturing processes. Responsible for the cleaning, sterilization, and maintenance of laboratory glassware. This role ensures that all glassware is properly cleaned and ready for use in various laboratory processes, adhering to strict quality and safety standards. This position may also involve handling hazardous materials, requiring strict adherence to safety protocols and guidelines. Accurately prepare buffer solutions by mixing acids, bases, and other chemicals in precise proportions. Use pH meters and other equipment to adjust and verify the pH of buffer solutions Handle, store, and dispose of hazardous materials safely. Routine cleaning, drying, and autoclaving of all laboratory glassware and plasticware. Safely follows all established standard operating procedures (SOPs) Hand washes and dries laboratory glassware and plasticware utilizing (may handle hazardous chemicals). Operates glassware washers, glassware dryers, and autoclaves for machine washing, drying and sterilizing laboratory glassware and plasticware. Clean the glass wash facility walls, floors, ceilings, counters, sinks, and vents. Cleans glass wash facility equipment. Tracks inventory of plasticwares and requests from stock when necessary. May support ELISA (Enzyme-Linked Immunosorbent Assay) production (plates, std/kit, crimping, sealing) Maintain accurate records of buffer preparation processes, including batch records and standard operating procedures (SOPs). Scan batch record in a timely manner Promote a safe work environment. May provide recommendations on maintaining the safety of the work environment. Participates in Environmental Health and Safety programs. Addresses corrective actions whenever a hazard is identified. Notifies supervisor of all observed hazardous conditions or unsafe work practices. Job Requirement High school diploma or GED Ability to read, write and speak English fluently Intermediate computer skills Perform intermediate math calculations Experience with SAP is desired ELISA plate production experience is a plus 1-3 years relevant work experience in a life science industry is preferred Attention to Detail: Precision in measuring and mixing chemicals is essential to ensure the accuracy of buffer solutions Familiarity with laboratory equipment and techniques, including pH meters, pipette, analytical balance, autoclave, industrial washer. Excellent organizational skills with ability to prioritize tasks Self-motivated, must have ability to work with minimal supervision Clear and effective communication skills for documenting processes and collaborating with team members and cross-functionally

The Lab Technician III supports the Chemistry Manufacturing department in accordance with forecasted production requirements. Responsibilities include: Manufacturing products within ISO regulations. Reviewing and reconciling documents and work orders. Supporting assigned projects under supervision. Maintaining daily adherence to production goals, including labor utilization, work order closure, and schedule adherence. Requirements Education & Experience BS Degree in Chemistry, Biology, or Physics (must have graduated within the last 12 months). OR High School Diploma/Associate's Degree with 3 years of experience in a GMP environment. Previous training and experience in lab equipment operation, chemical handling, and lab tools preferred. Knowledge & Skills Basic algebraic, statistical, and mathematical skills. General computer proficiency. Strong organizational skills. Laboratory skills, including reagent/solution preparation, pipetting, and testing. Strong verbal and written communication skills. Good interpersonal skills. Knowledge of QSRs and ISO 9001 regulations. Understanding of basic chemistry or biochemistry. Ability to follow detailed instructions, maintain accurate records, and complete assignments thoroughly and conscientiously. Strong problem-solving and troubleshooting abilities. Proficiency in MS Office and other manufacturing systems.

Must have: BA/BS degree in a related scientific discipline or some related college coursework with a minimum of 2 year's experience in a biotech lab environment. The QC Associate I is responsible for routine, accurate and timely testing of QC samples according to standard protocols and operating procedures, such as flow cytometry related protocols. The QC Associate I will prioritize daily workload and work independently. They will participate in the review of data, report results, and complete all required documentation and database entries. QC Associate I will receive specific instructions and ongoing guidance regarding required tasks and expected results. Job responsibilities: Trains and becomes proficient in all the required techniques, operation of relevant equipment and software packages associated with testing, data analysis, and data reporting. This may require working with human blood, human or mammalian cell culture and/or animals and animal tissues. Routine, accurate and timely completion of all assigned QC tests under supervision and according to standard protocols or operating procedures. Will prioritize daily workload and develop skills to work independently. Analyze data and report test results including completion of all required documentation and database entries as required by QC protocols or operating procedures. Calibrate and maintain equipment. Report problems to QC Supervisor or Manager. Maintain logs and required documentation as necessary. Prepare supplies and reagents and assist with laboratory maintenance as needed. Promote a safe work environment. May provide recommendations on maintaining the safety of the work environment. Participate in Environmental, Health & Safety programs. Address corrective actions whenever a hazard is identified. Notify supervisor and Safety Officer(s) of all observed hazardous conditions or unsafe work practices. Keep abreast of the basic requirements for safety compliance in own area of work and complies with those requirements. Participate in group or intra-department teams and projects as required. Participate in assigned cross-training. Education and experience: BA/BS degree in a related scientific discipline or some related college coursework with a minimum of 2 years experience in a biotech lab environment. Experience in an industrial or research laboratory preferred. Flow Cytometry experience required and Tissue Culture experience highly preferred. Knowledge and skills: Basic computer skills: MS Excel & Word. Knowledge of general laboratory safety.

We are a San Diego-based biotech company that provides cell cultures, growth media, and cell biology products for research use. We are seeking candidates for the CELL CULTURE TECHNICIAN role. The ideal Technician candidate is energetic, positive, adaptable, dependable, responsible, and takes pride in performing at a high level. Your work directly impacts the life sciences community, as renowned researchers at universities, biotech, and pharmaceutical companies worldwide depend on our products and services to make new discoveries. ========================================= CELL CULTURE TECHNICIAN RESPONSIBILITIES INCLUDE, BUT ARE NOT LIMITED TO Isolation, growth, subculture of mammalian cell cultures. Tissue dissection and small animal surgery. Lab maintenance, stocking, cleaning. Digital and hardcopy recordkeeping. Microscope work. Quality Control testing, data collection, and analysis. Depending on personal aptitude, the candidate may also be involved in cell isolation and other cell-based research & development projects. CELL CULTURE TECHNICIAN CANDIDATE REQUIREMENTS A B.S. degree in cell biology or closely related field. 1-2 years laboratory experience, or equivalent, is preferred. Possess a great work ethic Track record of completing tasks in precise and punctual fashion. Possess outstanding manual dexterity and be able to carry out aseptic work. Be able to carry out calculations necessary for determining cell doubling time, cell concentration, seeding density, molarity, etc. Be comfortable with what can sometimes be repetitive work, including extended use of microscopes. Be extremely neat and detail-oriented. Be familiar with life science laboratory equipment.

As one of the largest OEM servicers in the country, Nationwide Auto Services, Inc. provides a varied mix of services. Performed by the extensively trained members or the NAS team, we can customize our systems to assist you most effectively. NAS is committed to providing the highest level of CUSTOMER SATISFACTION by supporting an array of SERVICES to the automotive industry. Our Team Members are highly skilled and receive continuous training to ensure all areas of SAFETY, QUALITY, and PRODUCTIVITY meet/exceed company and customer expectations. NAS is a dynamic, adaptable, flexible, and diverse service provider that takes great PRIDE in placing our customer needs first and ensuring environmental initiatives are complied with wherever our EXPERTISE is required. Join the Nationwide Auto Services team! Role: Quality Inspector Location: National City, CA Job Description: The position performs quality audits and detailed vehicle inspections on new vehicles. Job Duties: Perform vehicle inspections to OEM requirements. Use data collection tools to complete inspections and audits. Create reports and communicate findings. Perform vehicle repairs. Test drive new vehicles Qualifications and Requirements: Experience in quality audit processes, procedures, and validation activities on new vehicles. Ability to work with handheld Tablets and input data in App interfaces. Trained and knowledgeable with automotive tools and equipment. Must be responsible, reliable, and able to work under pressure. Must be self-motivated and able to conduct oneself professionally. TWIC may be required at certain locations. Must have a Valid Drivers License.

Build Your Career. Build America's Future. Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded, and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Ensure Quality Control. Conduct routine testing of in-process materials, raw materials, environmental samples, and finished materials to ensure quality control of products at the point of production, shipping, and arrival upon the job site. Adhere to testing methods, including American Society for Testing and Materials (ASTM), American Association of State Highway and Transportation Officials (AASHTO) and Department of Transportation (DOT). Document and Report Information. Complete all required reports in a timely and accurate manner, interpreting, documenting, and storing the results. Communicate test results in a timely manner to the supervisor and properly document in a database. Maintain Lab Standards. Ensure housekeeping standards are maintained in and around the lab. Troubleshoot problems and review basic product specifications. Inspect, calibrate, and maintain testing equipment periodically. Monitor Stockpile. Inspect stockpiles, materials sources, and truckloads at plant sites. Monitor the daily construction of the stockpile to ensure that segregation and contamination is kept to a minimum or eliminated. Notify management immediately if contamination is identified. Inspect Equipment and Structures. Conduct routine inspections of the plant equipment in order to ensure safe, reliable, and compliant operations to maximize production and minimize interruptions. Additional Responsibilities. Other duties as assigned. Skills You'll Need: Experience. Prior training or experience in the materials testing field is preferred. Knowledge of general principles and practices of aggregate production is preferred. Safety Knowledge. Must display knowledge and awareness of construction and mining site hazards. Math Skills. Must possess good math skills and demonstrate the ability to perform simple to moderately complex arithmetic calculations. Technology Skills. Must have the ability to use computerized equipment and technology. Must be proficient in Microsoft Office Suite, Google, Oracle Business Environment, and other software packages relevant to the position. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets up apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Salary Range: the base salary range for this role is between $26.00 to $27.00 per hour. This range is not inclusive of our discretionary bonus or equity package. When determining a candidate's compensation, we consider a number of factors, including skillset, experience, job scope, and current market data. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions. NOTICE TO TEMPORARY STAFFING AGENCIES, PLACEMENT SERVICES AND PROFESSIONAL RECRUITERS Vulcan Materials Company has an internal recruiting department. Please review our policy as it relates to the use of temporary staffing agencies, placement services and professional recruiters.

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. You will provide quality assurance support aligned to increase internal and outgoing quality levels, supporting overall customer satisfaction of our products. Key job responsibilities * Performs basic and routine receiving, in-process, and final product inspections and testing. * Determines and uses appropriate measuring tools and equipment to verify dimensional and functional requirements. * Participates in problem solving activities for both product and manufacturing processes. * Performs basic process and product monitoring for quality. * Performs containment activities preventing potential or additional quality defects * Assists with product reviews and analysis to determine root cause and/or disposition; supports processing non-conformances (NC) to closure. * Performs FAI as directed, and reports results. * Effectively communicates with appropriate areas as needed (supply, manufacturing, engineering, quality, customer service, production planning, logistics, etc.). * Provides process audit support in designated areas. * Assists in basic calibration of inspection, test, and measurement equipment. * Observes all applicable safety rules and reporting any unsafe conditions or potential safety hazards. * Responsible for managing the ESN label database, including creating and revising labels for accuracy. * Performs other related duties as assigned. Qualifications and Experience * High school diploma or G.E.D. Bachelors in technical field preferred. * Ideally 1+ years experience working in quality preferred. * Ideally 1+ years experience using measurement tools and techniques preferred. * Strong mechanical aptitude. * Ability to use common measuring equipment (e.g., Calipers, micrometer, paint mil gauges, go / no-go gages, etc.). * Ability to understand and use work instructions and procedures, and complete forms. * Good written and verbal communication skills. * Skills to quickly learn and operate a wide variety of test and measurement equipment. * Skills in attention to detail and accuracy. * Ability to apply basic math and geometry. * Skill in using personal computers including Microsoft Office applications (Word, Excel, Outlook, etc.). * Ability to operate hand tools. * Ability to lift up to 50 lbs. * Ability to stand and walk frequently. * Experience with Quality Management Systems preferred. WE HAVE: * A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day * At nVent, we believe safer systems ensure a more secure world. We connect and protect our customers with inventive electrical solutions. We design, manufacture, market, install and service high-performance products and solutions for mission-critical equipment, buildings and essential processes. Our solutions are helping build a more sustainable and electrified world. * We are a $3.3B company with a dedicated team of more than 11,000 employees around the globe. Our comprehensive portfolio of enclosures, electrical and fastening, and thermal management solutions dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, RAYCHEM and SCHROFF. * Commitment to strengthen communities where our employees live and work * We encourage and support the philanthropic activities of our employees worldwide * Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money * Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: * Innovative & adaptable * Dedicated to absolute integrity * Focused on the customer first * Respectful and team oriented * Optimistic and energizing * Accountable for performance * Benefits to support the lives of our employees Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for full-time employees that includes: * Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. * A 401(k) retirement plan and an employee stock purchase plan - both include a company match. * Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Join the world leader in thermal mass flow meter technology. FCI began in 1964 by pioneering the development and application of thermal dispersion flow and level sensing technology. The Company is the world-recognized leading manufacturer for solving flow and level measurement applications for industrial process and plant applications using patented thermal dispersion flow measurement technology. From off-the-shelf product solutions to custom engineered products and systems, FCI provides world leading experience and a record of unequaled innovation to meet or exceed our customer application demands. Complimenting FCI product leadership is a world class Flow and Level Calibration Facility in which all calibrations are performed in liquids or gases utilizing only N.I.S.T. traceable equipment and instrumentation. Position Purpose Under the direction of the Quality Assurance Manager, the Quality Inspector will maintain quality standards by approving incoming materials, in-process production, finished products, and recording each result. Excellent communication and leadership skills are a must, as well as keen attention to detail. Essential Job Functions (primary duties and outputs of position) * Inspect at receiving and in-process inspection. * Complete operation sheet with stamping and dating for controlled production. * Maintain lot traceability. * Interpret production schematics, specification and/or blueprints. * Perform final inspection of complex assemblies. * Administer prescribed inspection procedures, set up and checks. * Perform visual inspections on production bench-assembled components and subassemblies for conformance. * Predetermine electrical and/or mechanical standard, specification or tolerances. * Maintain gauges in working order and maintain work area. Requirements Safety * Follow safe work practices, participate in safety training as required, and report any unsafe conditions or accident. Quality * Employees are responsible to understand and support the quality policy and the appropriate elements of the quality management system for their areas of work, reduce, eliminate, and prevent quality deficiencies including escapes. * Initiate action to prevent the occurrence of nonconformities related to products, process, and quality system. * All employees have the responsibility and authority to identify quality deficiencies, elevate any concerns for action within or related to our quality system and processes. Communication * Communicate effectively in English, both verbally and in writing. * Maintain effective and constructive working relationships with others both internally and externally. * Prepare effective reports and presentation of departmental information. Education/Work Experience Requirements * Must have a high school diploma or GED. * 1 or more years of experience in manufacturing QA inspection or Associate's Degree. * Must be able to operate standard inspection devices and/or elementary testing equipment. * Must be able to document electronic invoices with an MRP system. * Must be able to read and understand wiring diagrams, schematics, blueprints. * Must be able to read and interpret drawings and follow verbal and written job instructions. * Able to pass IDC-J-STD-001 on IPC A610. * Experience working in a controlled environment where lot traceability is desired. * Computer experience (using Excel) for data collection. * Requires US citizenship or permanent resident status.

Job Description: Under direct supervision the Quality Technician I assures the Quality of Laird processes and products by performing audits, inspections, tests, supports defect investigation and analysis, first article sample submission (AS9102) and maintains high detail oriented documentation process for all internal processes as well as for Source Inspection Items that need to be presented to Customer. How will you do it • Assists periodic product audits/inspections on running parts and conduct final shipment audits utilizing AS9100 Standard as the basis for auditing. • Assists with system and process audits (supplier certification, internal system, subcontractor, comprehensive process, set up verifications, etc.). • Investigate and process quality problems to aid in their thorough resolution with support the Quality Engineer area. • Accurate and detailed ERP System / product transactions to maintain accurate inventory levels. • Acquires knowledge necessary to interpret internal and customer specifications to determine acceptable from reject able products. • Develop and maintain filing system of inspection records for manufactured products. • Update changes to customer specification criteria as directed. • Ensure all necessary inspection records accompany shipments including detailed documentation on products requiring Source Inspections. • Supports team when coordinating calibration of measurement equipment if required. • Assist Quality Assurance Engineers and Manager as needed. • Adheres to quality and safety systems or maintenance of quality and safety standards. • Perform other related duties and assignments as required. What we look for • Proficient in AS9100 Aerospace Standard is a plus, other related quality system standards (e.g., TS16949 etc.). Quality System Knowledge with background in Aerospace Products/Processes is highly preferred. • Proficient in First Article documentation and preparation (AS9102). • Ability to read and interpret blueprints with close attention to detail. • Ability to use precision measuring instruments (Caliper's, Micrometer's, Optical Comparator's, Faro Arm CMM is a plus, Pin Gauges, Drop Gauge, etc). • Ability to operate inspection/lab test equipment (such as OGP, hardness tester, etc) • Computer skills including spreadsheet, word processing, and database management software • Data analysis skills and problem-solving skills consistent with 8-Discipline technique • Good written and oral communication skills as well as good interpersonal and organizational skills. • Background in RF and or Electrical field is preferred. • Fundamental knowledge of mathematical concepts. • Must have good or corrected eyesight to insure quality of work and ability to lift and carry 20 pounds frequently EDUCATION / EXPERIENCE • High school diploma with additional technical courses, CQT or CMI preferred. • Minimum 5 year Quality Inspector experience in manufacturing and minimum of 2 years of Quality Technician Experience.

Responsible for reviewing digital files, proofs, and overlays to ensure content is built to required specifications and precise to established internal expectations, documented tolerances, print industry standards, procedures and/or published direction. Evaluate and review cards, provide direction for print accuracy or improvement. Quality Control is an extension of Prepress Production and works closely with a variety of internal departments to ensure quality and fiscal responsibility. ESSENTIAL DUTIES AND RESPONSIBILITIES The following statements are intended to describe the general nature of the level of work being performed by an individual assigned to this job. Other duties may be assigned. * Review print design engineering, product content, printability and make recommendations to ensure quality standards are attained. * Assessed delivered information and implementation of direction received from designated Lead, Project Manager(s), Marketing, Legal, Design, Sports & Entertainment, Operations and written documentation from mechanicals, briefs, and costing documentation. * Ensure the highest possible quality of files produced within lithographic pre-production environment. Quality Control Technician(s) will maintain a global view of these production procedures and make on-going recommendations to ensure tolerances are maintained and quality product files produced. * Effective communication skills required demonstrate close mindfulness with organized practices. Responsible for interacting daily with Digital Operations Team Lead, Project Manager(s), Prepress Production personnel and Designers.' * Support and adhere to internal Creative Departmental procedures and requirements to include but not limited to, assisting Prepress Production during production heavy cycles. * Proficiency in the following software or systems: Adobe Creative Suite, MS Office, and Excel. * Hands-on, energetic and motivated self-starter with the ability to work additional hours as required. INTERACTION This position will interact closely with the Director of Creative, Digital Operations Production Manager, Project Managers, Prepress Production, Designers, and other internal personnel. EDUCATION/YEARS EXPERIENCE * High School Diploma or equivalent. College Degree with an emphasis in Graphic Arts a plus. * 1-2 years of experience in Prepress or related area, publishing, or relevant duties. * Knowledge of Kodak Prinergy is a plus. REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. KNOWLEDGE, SKILLS AND ABILITIES * Present understanding of Prepress and Print Industries' standards, competent knowledge of established production tolerances. Familiarity with the 4/c process, to include, but not limited to: spot colors, varnish, foil, die cuts, deboss and/or embossing. Imposition software skills with a basic understanding of file standards for print production (bleed, trapping, color separation, resolution, etc.). * Minimally an intermediate knowledge of Mac and applied software with verified results, fundamental knowledge of ripping and trapping of digital files through a Prinergy Workflow. The qualified applicant must possess acceptable computer skills; a working knowledge of Adobe Creative Suite is a plus. Additionally, basic to intermediate proficiency in the following software: Microsoft Word, Excel, and Outlook. * Strong oral and written communication skills demonstrate close mindfulness with organized practices. Ability to articulate clearly with internal partners and not be afraid to ask questions. * Effective organizational skills with the ability to manage multiple, high priority projects with dedicated attention to detail. * Demonstrated ability to read, comprehend written instructions and follow pre-established guidelines. * Utilize technology and maximize efficiency: Maintain education and ability of innovative techniques, technologies, and software capabilities. On an on-going basis, ensure we are maximizing our technology resources and making recommendations for improvements. * Excellent interpersonal, problem solving and troubleshooting skills. * Professional demeanor; collaborator orientation. * Ability to perform duties under minimal supervision while exercising reasonable discretion and independent judgment. * Manage time effectively, prioritizing duties and meeting deadlines. Ability to maintain flexible work hours. Work hours are mostly consistent, but production requirements require flexibility. * Knowledge of the following areas would be desirable: NHL, Football and Basketball, and/or historical knowledge of pop culture, including comics and films spanning a multitude of trends. * Hands-on, energetic and motivated self-starter