Senior Mechanical Engineer
Project Engineer Job 4 miles from Novi
Remora is hiring a Senior Mechanical Engineer who will drive the hardware development of system design including piping, control valves, heat exchangers, vacuum pumps, blowers, compressors, and CO2 storage subsystems in the Remora mobile carbon capture device from concept through production. This role will lead requirement generation, component development, component sourcing, overseeing install and commissioning/systems testing, while ensuring design deliverables meet aggressive timelines.
We're a 50-person climate tech startup based in Detroit, MI. We're building a device that captures a semi-truck's carbon emissions directly from the tailpipe. We'll sell the CO2 to end-users, and share that revenue with our customers, so our device will create a new revenue stream while reducing their emissions.
We've signed up some of the largest companies in the world to pilot our technology, including iconic multibillion-dollar brands, top trucking companies, and some of the most recognizable Fortune 100 companies. We've raised multiple rounds of funding from top investors like Lowercarbon Capital, Union Square Ventures, First Round Capital, Y Combinator, and Valor Equity Partners.
Responsibilities:
Plan & Develop: Set clear goals, timelines, and strategy for the teams working on sub-systems, ensuring we meet ambitious requirements on a tight timeline.
Execute: Use your strong leadership, communication, and strategic thinking skills to drive R&D on key components-like piping, control valves, heat exchangers, vacuum pumps, blowers, compressors, and COâ‚‚ storage subsystems-working closely with our experts and suppliers to bring these systems to life.
Grow: Support and guide less experienced team members through design and decision-making, creating a collaborative and innovative team environment where everyone can thrive.
Collaborate: Serve as a point person for the sub-system with other members of the Engineering team and share regular updates on progress with the team.
Design: Define requirements and provide design direction and decision making for the vacuum, compression, and CO2 storage subsystems based on regulations, existing standards, and new standards created by Remora. Lead design reviews, develop analytical and computational models, and DFMEA/DVP&Rs; including bench and system testing plans, pre-production verification and validation, and design release.
Minimum Requirements:
Bachelor's degree or higher in Mechanical Engineering or a related field
7+ years of mechanical engineering experience
Experience with system design including some of the following: Industrial, Bio-Pharma, Oil & Gas, Modular Process
Skid
Design, including heat exchangers, pumps, valves, instruments, pressure vessels, and associated interconnected piping
Experience leading a team of engineers to achieve design deliverables in an R&D environment
Experience rapidly learning about novel technologies and identifying new technologies for integration into systems
Experience working closely with suppliers and driving them to aggressive timelines
Preferred Requirements:
Experience with mobile vehicles, ideally with heavy-duty vehicles in industries such as heavy-duty truck, automotive - specifically diesel engines and exhaust, aeronautical, locomotive, marine
Experience with fuel transfer systems, air
compressors
, steam boilers or other utility systems.
Experience with the transfer and storage of liquid carbon dioxide
Experience with vacuum pumps, blowers,
compressors
, or pressure vessel designs
Experience with large scale system design
Experience with industrial gas separation, ideally
PVSA
/TSA gas separation processes
Experience with
P&ID
generation and maintenance
R&D experience working on first-of-its-kind, complex hardware products with short timelines and limited resources
Experience generating CAD designs, both 3D and 2D, along with CAE/FEA/CFD simulation and analysis
Experience at a venture-backed startup
Here's what we value:
Mission First: We are laser-focused on our mission. We have chosen to take on the defining challenge of our time, and we don't shy away from the hard decisions required to put our mission first, no matter how tough. The world needs our technology and it won't happen any time soon if we don't make it happen. We are a low-ego team, and we prioritize the mission over our self-interest. We think strategically with an eye to the long term, and we clearly separate what must be done well now, and what can be improved later, despite ambiguity.
Burning Urgency: Our hard-core intensity and work ethic match the crisis we're in. We have a strong bias toward action, and we execute with focus and speed. In the absence of guidance, we take charge, lead our teammates, and accomplish our goals. We aren't afraid to change course when something isn't working, and we find solutions even when it seems like there are none. We are cool under pressure, and our quiet determination and drive are unwavering. We relentlessly push ourselves and each other to improve. We don't accept adequate performance. Excellence is the expectation. Many would say our standards are unreasonably high, and many would say our goals are unreasonably bold, but we are hungry to be exceptional. We will never give up, no matter what. If we get knocked down, we get back up, every time. We will not fail.
Uncompromising Honesty: We are always honest with ourselves, our teammates, our customers, our investors, our suppliers, our communities, and all of our partners, especially about what's not going well and what we don't know. When we see issues, risks, or challenges, we speak up, and when we make mistakes, we admit them proactively and take full accountability. We challenge others directly when we disagree, even when it's uncomfortable, and we seek this uncompromising honesty from others.
Treat People Exceptionally Well: We care intensely about everyone who is on this mission with us, and our standard is exceptional respect for our teammates, partners, and communities. Teammates who bring different perspectives and backgrounds are essential to our success, and we empower everyone to share their voice. We listen to truly understand. We constantly encourage and help our teammates, and inspire each other with our enthusiasm and optimism.
Joyful Curiosity: We love to learn, and we learn quickly. We explore the unknown with wonder and excitement. We reason from first principles. We generate original ideas with an open mind and test them quickly in the real world. We take risks and adapt as we discover more. We explore many ideas in parallel, and we don't count on a silver bullet solution. We share our ideas freely with our teammates. We are skeptical about conventional wisdom, and we question every assumption and requirement. We are always looking for ways to simplify. We are rigorous and attentive to detail. We are eager to understand all aspects of our business and technology, and we contribute effectively outside our individual specialties. We never stop learning.
Logistics:
Location: Wixom, MI
Start date: Immediately.
Compensation and Benefits:
Salary: $140,000 - $200,000
Competitive Stock Options
Healthcare (Aetna)
Dental
Vision
Retirement (401k)
Student loan assistance
Three Weeks of paid time off
Eleven Holidays off
Dependent care assistance (childcare or eldercare)
Parental leave
Unlimited sick and compassionate leave
Employee development and coaching
Office setup (remote) or relocation (in-person) stipend
Climate change disproportionately impacts communities of color, so we're looking for candidates deeply committed to reducing emissions and to racial justice. People who identify as Black, Indigenous, person of color, female, non-binary, trans, gender non-conforming, or any other identity underrepresented in startups are especially encouraged to apply.
Research shows that women and people of color are less likely to think they are qualified for a position after reading a list of requirements like the one above. If you are worried that you are not qualified, please apply anyway! We're most excited to work with people who learn quickly and want to tackle the climate crisis.
Powertrain Project Engineer
Project Engineer Job 21 miles from Novi
Are you looking to work for a company that provides an innovative work environment, and your voice is heard? We have multiple needs for Powertrain Project Engineers that have a focus on engine and hybrid systems. These roles are in Chelsea and Auburn Hills. Ideally, we are looking for candidates that have past Stellantis experience.
As a Project Engineer specializing in the development of both conventional and hybrid powertrains, you will be responsible for leading the calibration and validation of base engine controls, aftertreatment controls, hybrid controls or on-board diagnostic (OBD) systems. Additionally, you will be responsible for general engine and hybrid powertrain development work and testing as well as validation and certification activities performed on chassis and engine dynos as well as in-vehicle/machine in the application environment. Working with highly motivated individuals from across the globe on a variety of engines, vehicles and markets, the Sr. Project Engineer will be able to increase their scope of experience with technology used across the globe. This Sr. Project Engineer position requires a highly motivated individual with an eagerness to learn and make a positive contribution.
This position will work onsite at our client located in Auburn Hills, MI or Chelsea, MI.
Job Responsibilities:
Lead the installation and commissioning of new powertrain test setups, including conventional combustion engine and hybrid configurations.
Identification and implementation of necessary connections, measurement points and instrumentation to support testing efforts.
Plan, coordinate and execute the testing of engines, aftertreatment systems, powertrain systems and OBD systems on engine/chassis dynamometer or in application.
Analysis of measured parameters and system performance relative to project targets.
Calibration and validation of electronic control unit parameters to satisfy program objectives.
Summarize findings and prepare presentations/reports for internal and customer review.
Manage customer hardware and project component inventory and logistics.
May involve work onsite at customer facilities, vehicle test trips to support ongoing development programs.
Required Qualifications:
Bachelor's degree in Mechanical/Automotive Engineering, Electrical/Electronics Engineering or related field, Masters preferred
3+ years of experience in engine, vehicle and/or powertrain testing
Strong fundamentals in thermodynamics, fluid mechanics and internal combustion engines
Strong knowledge of SI and CI combustion processes
Strong knowledge of aftertreatment systems
Experience in calibration of base emissions control strategies to fulfill customer and regulatory requirements or experience in calibration and implementation of OBD strategies meeting CARB regulations
Understanding of base engine, aftertreatment and/or hybrid electronic control system strategies, knowledge on software logic implementation and control system functionality
Experience using commercially available calibration and development tools (i.e., ETAS INCA, ATI Vision, Vector CANape/CANalyzer, Matlab/Simulink)
Professional communication skills (oral and written English)
Must be a motivated team player to perform in fast paced development environment
Preferred Qualifications:
Knowledge of hybrid powertrain systems
Knowledge of control strategies employed on Bosch and/or GPEC controllers
Strong understanding of US emission regulations and certification test procedures for Gas, Diesel and/or Hybrid systems
Understanding of US OBD regulations and monitoring approaches
Hands-on experience with engine hardware - engine assembly or rebuilding
US citizen or Permanent Residence a plus
What you'll get:
Healthcare (Medical/Dental/Vision)
401(k) Program w/ company match
Life Insurance and Disability
Paid Holidays
Vacation Time
Civil Engineering Project Engineer
Project Engineer Job 17 miles from Novi
The Project Engineer will collaborate with civil engineers, land planners, landscape architects, and CAD designers to design various types of land development projects.
Essential Functions
Civil design for residential, commercial, and municipal projects
Perform construction permitting for soil erosion/sedimentation control, NPDES stormwater discharge, sanitary sewer, watermain, MDEQ wetland/floodplain, and MDOT commercial driveway
AutoCAD Civil 3D drafting
Participate in site visits, agency meetings, and municipal meetings as needed
Communicate effectively with team members and clients
Essential Skills for Performing the Job
Self-motivated
Detail-oriented
Problem-solving
Effective written and verbal communication
Required Education and Experience
Bachelors of Science in Civil Engineering
AutoCAD Civil 3D
5 + years of experience in private land development civil engineering design
Professional Engineer Licensure or ability to obtain within 2 years
Position Type/Expected Hours
This is a full-time position. Some flexibility in hours is permitted, but s/he must be available during the standard work hours of 8:00 AM to 5:00 PM.
Physical Demands
This position is a combination of sedentary work, with some field and travel-related work. An employee is regularly required to stand, sit, walk, reach, type, talk, hear, balance, stoop, kneel, crouch, crawl, climb, push, pull, carry, and lift. An employee may also be required to drive, traverse wooded and/or uneven terrain, enter structures, use ladders, walk on roofs, enter small spaces, and work in various weather conditions.
Travel
Occasional travel will be required as a part of the Project Engineer role.
Disclaimer
Please note this position description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities are subject to change.
Eligible candidates will be legally authorized to work in the United States without employment visa sponsorship.
Nederveld Inc. is an Equal Opportunity Employer.
Project Engineer
Project Engineer Job 7 miles from Novi
The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. In order to be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion.
Responsibilities
Read and know the contract documents and specifications thoroughly, noting errors, omissions, conflicts, or need for additional information.
Assist superintendent to ensure the quality of installation is in accordance with the project's plans and specifications and BCG Policies and Procedures. Prepare preparatory checklist for all definable features of work.
Assist Superintendent with the RFI Process, which may include the following; communication with subcontractor, superintendent, owner, architect including distribution of RFI's and creation and maintenance of RFI Log.
Assist Superintendent in timely resolution of engineering conflicts.
Assist superintendent, if necessary, with maintenance and distribution of project schedule.
Assist PM in procurement/buy-out process, as requested, including writing and/or reviewing detailed project scopes.
Create, maintain and distribute control logs for contract documents, i.e. plans, specifications, bulletins, CCD's, PR's, etc.
Coordinate the material procurement process including creation and maintenance of MSR (Material Status Report) Log. Maintain constant communication with superintendent and project manager relative to coordination of materials fabrication and arrival on site.
Develop, administer, monitor, and maintain a detailed Shop Drawing and Material Status report which is saved to the "Q" drive as changes occur and includes receipt/distribution of submittals, shop drawings, samples, calculations, etc. ROJ dates shall be developed in conjunction with Superintendent and project schedule.
Coordinate material/subcontractor deliveries in accordance with project schedule, and notify Project Manger of any issues.
Assist PM in documenting project meetings through meeting minute format - provide distribution to all parties
Assist PM with cost control functions, i.e. pricing of additional work through bulletins, direct owner requests, etc. Request, receive, log in and validate subcontractor quotes, submit to PM for review prior to the assembly of change request documentation.
Participate in developing and maintaining a fair and just working relationship with with the Owner's, Architect, Engineer, Consultants, AHJ, etc. which will result in both project specific success and long-term benefit.
Administer close-out procedure from start to finish with assistance from project manager, project coordinator and superintendent. Process includes close-out log, assembling and packaging of maintenance manuals, as-built drawings, warranties, and other documents in fashion acceptable to owner/architect, as well as coordination with subcontractor and superintendent for commissioning/training as required. Responsible for tracking of attic stock materials through subcontractor and superintendent.
Assist superintendent with the Punch List process as required. Communicate non-compliant subcontractors with project manager and accounting in order to withhold money until subcontractor is compliant.
Perform additional assignments per Project Manager's direction.
Maintain professionalism during work hours in support of Braun Construction Group's image.
Actively market Braun Construction Group services to potential clients. Communicate potential leads to business development manager and project executive.
Provide subcontractor evaluations to Vice President Operations and Estimating.
Qualifications
Bachelor's degree in Construction Management, Mechanical or Industrial Engineering or equivalent experience preferred
1 - 3 years' of experience as a project coordinator, project engineer, or project manager
Strong experience in AutoCad and Microsoft Office Suite
Familiarity with rules, regulations, best practices and performance standards
Mechanical Design Engineer
Project Engineer Job 21 miles from Novi
Looking to work for a leading robotics integrator offering unique solutions to multiple industries?
Open to learning new things & developing high-performance products?
Do you want to be at the forefront of engineering in a business always looking for ways to improve its products & offering to customers?
We're looking for a Mechanical Design Engineer who enjoys working in a team to work on custom assembly projects building processes from concept to installation.
What you'll do:
Creating & maintaining technical documentation.
Working on prototyping, trouble shooting & design improvements.
Work closely with customers to interpret requirements into design.
Collaborate with cross-functional teams to conceptualize, design, and develop mechanical systems, components, and products.
Design using Solidworks to create detailed 3D models and engineering drawings for manufacturing.
Layout full systems in 2D AutoCAD
Optimize designs for performance, manufacturability, and cost-effectiveness while considering regulatory and safety requirements.
What you'll need:
A background in machinery or tooling.
Experience in automation.
Experience with a 3D & 2D CAD software (Solidworks or Inventor)
Great communication & background in collaborating with a cross-functional team.
Working knowledge of FEA.
Experience with GD&T.
Mechanical Engineer
Project Engineer Job 17 miles from Novi
Rydberg Technologies is seeking a highly skilled and dynamic Mechanical Engineer to join our growing team. In this role you will support product development and manufacturing in a hands-on technical capacity involving a wide range of engineering tasks from design to manufacturing and quality assurance testing of quantum devices and photonics. As a member of our cross-disciplinary team, you will contribute to cutting-edge projects in a fast-paced environment. The ideal candidates are strong individual contributors supporting team goals, solution-oriented, give attention to the finest project details, and thrive in a dynamic team environment.
Responsibilities include:
Design and engineer mechanical systems and components that meet functional specifications and user requirements.
Utilize CAD software (SolidWorks) to create detailed 3D models and 2D technical engineering designs for manufacturing.
Conduct simulations and analyses (COMSOL) to test the feasibility of designs and ensure performance (mechanical, thermal, etc.) and compliance with industry standards.
Build and manufacture glass vapor cells, ultra-high vacuum (UHV) systems, precision optomechanical and electromechanical assemblies, laser, optics and fiber-optics packaging.
Collaborate with project management and other engineering teams to integrate mechanical designs with electronic systems and software.
Prototype development, including selecting materials, fabricating parts, and performing tests.
Manage the full product development cycle from concept through to production.
Prepare technical documentation, including design specifications, testing protocols, and user manuals.
Support manufacturing processes by working closely with suppliers and manufacturers to ensure product quality and manufacturability.
Stay current with the latest technologies and advancements in mechanical engineering and related fields.
Expertise and skills include:
Bachelor of Science or Masters in Mechanical Engineering, or a related field.
At least 3 years of relevant experience in design, engineering, and manufacturing.
Expert in CAD and SolidWorks for mechanical engineering design.
Experience with COMSOL or similar simulation tools highly preferred.
Knowledgeable of material properties e.g. mechanical, thermal, magnetic, RF, etc.
Experience with programming languages such as LabView, Python, and C is highly beneficial.
Strong capability in both analog and digital electronics.
Comfortable working in a laboratory environment and handling delicate materials.
Excellent written and verbal communication skills, with the ability to collaborate effectively with coworkers and external collaborators.
Self-motivated, meticulous, and detail-oriented with a high level of organization and planning.
US citizenship or green card may be required by US export control laws
Work location in Ann Arbor, Michigan USA
At Rydberg Technologies, you will have the opportunity to be part of a dynamic team that is pushing the boundaries of quantum technology. This position offers the chance to develop unique skills and knowledge in a high-tech industry, contributing significantly to innovative projects that have a real-world impact. For more information about our company and the groundbreaking work we do, please visit ****************************
This position offers a unique opportunity for a mechanical engineer passionate about technology and innovation. If you are eager to contribute to state-of-the-art quantum technologies and thrive in challenging environments, we encourage you to apply.
Product Development Engineer
Project Engineer Job In Novi, MI
HTI is searching for an experienced Product Development Engineer for a Tier-1 Automotive Supplier in Novi, MI. The company provides a positive work environment and a comprehensive benefits package. This is a full-time, onsite, direct hire position.
What They Offer:
Full benefits package - Medical, Dental, Vision, EAP, 401k Match
Health Incentives to your insurance premium
11 Paid Holidays + 1 Floating Holiday
Progressive PTO Plan
Multiple Bonus and Incentive Programs
Opportunity to work on cutting-edge automotive product development
Professional growth and development opportunityies
What You Need:
Bachelor's degree in Engineering (Mechanical or related field preferred)
3-5 years in product development or design engineering, preferably in automotive components
Proficiency in Catia CAD design
Knowledge of Geometric Dimensioning & Tolerancing (GD&T)
Experience with Advanced Product Quality Planning (APQP)
Strong understanding of materials and structural design
What Your Role Will Look Like:
Lead the design and development of drive shafts and half shafts for assigned customers
Manage project timelines, ensuring on-time delivery and quality
Collaborate with internal teams to evaluate and sustain supplier capabilities
Prepare and review design deliverables with a focus on cost efficiency and customer requirements
Oversee engineering change management, ensuring accurate documentation and approvals
Interpret customer specifications and translate them into optimized product designs
Conduct design verification tests and calculations to meet performance and quality standards
Develop and maintain Design Verification Plans and Design Failure Mode Effects Analysis (DFMEA)
Create and update Bill of Materials for prototype and production phases
Lead problem-solving efforts to address design and performance concerns
Mechanical Engineer
Project Engineer Job 27 miles from Novi
The Mechanical Engineer has the responsibility for developing new or improved designs related to the manufacturing process. This position will support all of the plant goals for improving safety, quality and cost reduction initiatives by evaluating manufacturing processes, equipment and tooling, collecting data, note observations and make recommendations for improvements.
PRINCIPAL DUTIES & RESPONSIBILITIES:
Develop new or improved designs in the manufacturing process.
Participate in design & build of new equipment, prove-out new equipment, bid packages, procurement, and supplier management.
Utilizing AutoCAD and/or Solidworks for design initiatives.
Evaluating manufacturing processes and equipment by observing and collecting data, note observations, and make recommendations with the goal of improving efficiencies and costs.
Monitors project progress and develop strategies to meet design targets.
Supports plant goals for improving safety, quality, and cost savings initiatives.
Support engineering builds start-up support and resolving issues.
Analyze tooling selection and application.
Provide technical support for installation of new equipment/processes.
Provide technical support for training of plant personnel.
Coordinate needed support resources to achieve project objectives.
Troubleshooting and problem solving of equipment operation, efficiency, and material flow.
Work closely with production, maintenance personnel, and suppliers to ensure timely completion of projects.
Participate in corrective/preventive actions and continual improvement initiatives.
Participate in the development of Process Review documentation, including Process Flow Diagrams, Control Plans, PFMEA, and work instructions.
AUTHORITIES:
Stop any process or equipment that is deemed as a potential danger to any employee
Stop any process or equipment that is deemed as having an equipment malfunction
Stop any process or equipment that is producing material that does not meet customer demands
Approve purchase orders up to $1,000 without additional approvals
EXPERIENCE & EDUCATIONAL REQUIREMENTS:
Education - BSME Bachelor of Science in Mechanical Engineering
Proficient in AutoCAD or Solidworks.
Experienced in various automation, material handling, robotic/vision systems, etc.
High level of analytical ability where problems are unusual or difficult.
Highly proficient with basic safety standards.
Strong background in manufacturing and quality system activities.
Must have a working knowledge of quality systems such as ISO 9001
Must also be skilled with use of computers and working with various computer
programs.
High level of interpersonal skills to work effectively with others.
PHYSICAL REQUIREMENTS & WORKING CONDITIONS
Physical Demands: Must be able to regularly lift up to 50 lbs., bend, lift, climb, stoop, stretch, stand. Job requires lots of walking and stair climbing.
Work Environment: Regularly exposed to heat, cold, dust, noise, humidity, fumes, etc.
May be required to work overtime or any shift, including weekends, to meet company commitments/goals
Assistant Project Engineer
Project Engineer Job 34 miles from Novi
The ideal candidate will be well organized and comfortable dealing with financial data. This individual will be responsible for overseeing the accounts payable and receivable, processing payroll and conducting other tasks related to finance. They should be excellent at recording data and have an ability to product clear financial reports.
Responsibilities
Assist Project Managers in planning, scheduling, budgeting, and overseeing all phases of construction projects.
Serve as the right-hand person to the Project Manager, ensuring seamless communication and problem-solving.
Coordinate job setup, pre-construction activities, submittals, contracts, and cost tracking.
Facilitate project documentation, including invoicing, compliance, submittals, and safety records.
Conduct site visits, track progress, assist with WIP adjustments, and ensure adherence to MDOT 2020 Standard Spec Book.
Support team accountability by monitoring performance, assisting with issue resolution, and coordinating team efforts for successful project execution.
Qualifications
Managing clients and pursuing business relationships
Proficiency in Outlook, Excel, Bluebeam/Adobe; MS Office
Strong knowledge of project management principles and practices is essential.
Must be extremely organized and able to balance and prioritize high project volume and be self-motivated.
Deadline Driven to provide quality work
Ability to walk on uneven surfaces and safely maneuver a construction jobsite
Factory Automation Design Engineer - Custom Assembly Line Manufacturer
Project Engineer Job 23 miles from Novi
An international custom assembly line solutions company is currently seeking an experienced Factory Automation Design Engineer to join their facility in the Rochester Hills, Michigan area. The ideal candidate has 3-5 years' experience with custom assembly/production line design. This is a full-time and direct hire position.
Factory Automation Design Engineer Responsibilities Include:
Design and development of the whole material handling robotics/factory automation lines for customers
Communicate with clients to understand the all the requirement including quality
Develop and maintain engineering drawings, schematics, and Bill of Materials and budgeting
Create records of design changes and project updates for internal and customer use
Communicate and collaborate with mechanical engineering manager to create a concept
Work with various department (Project Manager, Controls Engineering, manufacturing) until customer's approval of the design
Participate in meetings regarding projects with internal departments and outside customers
Assist management in design department process improvement and performance analysis
Other duties as assigned
Factory Automation Design Engineer Requirements Include:
Bachelor's degree in a Mechanical Engineering, Industrial Engineering, or related field preferred
Minimum 3-5 years' design experience in custom robotics/machineries/assembly line
Ability to read, interpret, and improve engineering drawings and schematics
Ability to do electrical and pneumatic drawings
Strong communication and collaboration ability in a multicultural environment
Strong problem-solving ability and willingness to collaborate with other colleagues and departments
This position includes manufacturing and office work environment. While performing the duties of this job you may be required to intermittently sit, stand, walk, lift up to 25 pounds, lift in excess of 25 pounds with a lift assist, climb stairs, use hands to handle or feel parts/equipment, reach with hands and arms, stoop, kneel, crouch, bend at the waist, talk and hear. You may also be required to use close vision, distance vision, color vision, depth perception, and peripheral vision.
*************************************************************************
Activ8 Recruitment & Solutions / Renaissance Resources Inc. has been a trusted leader in North American recruiting for Japanese businesses for over 25 years. We specialize in connecting top talent with companies in the Automotive, Electronics, Food & Beverage, Logistics, Manufacturing, Oil & Gas, Banking & Finance, and Entertainment industries. Our client-focused approach ensures that we understand your unique needs, whether you're a company seeking skilled professionals or a candidate looking for the right career opportunity. By working closely with each individual, we provide tailored solutions that drive success.
We screen ALL Candidates to verify the validity of each applicant's provided information. Upon submitting your resume, we will contact only those candidates that we deem qualified for our client. If we do not contact you, we do not see the fit for the position. If we are unable to reach you in a reasonable timeframe, you will be eliminated from the pool of potential candidates. All offers of employment may be contingent upon successful completion of a background check in compliance with applicable laws.
We prioritize direct applicants; third-party resumes may not be reviewed.
Product Engineer - Warranty and Service
Project Engineer Job In Novi, MI
OBJECTIVE OF THE POSITION: The Product Engineer - Warranty & Service is responsible for fulfilling the customer service engineering requirements for new and existing transmissions. The Service Product Engineer will be the primary technical contact with the customer, working cross-functionally to ensure product serviceability in the field.
ESSENTIAL FUNCTIONS:
Ensure technical requirements are defined sufficiently to support customer requests.
Internally manage customer change requests.
Manage service part obsolescence interchangeability, and support lifetime bay analysis.
Support root cause analysis, of returned warranty transmissions and parts.
Manage release of service BOM's and align with customer.
Assesses all engineering changes for serviceability impact and lead related service ECR, BOM activities.
Lead review of customer procedures for service repairs.
SECONDARY FUNCTIONS:
Other duties assigned by supervisor.
REQUIREMENTS PROFILE:
Professional Background / Basic Qualifications / Work Experience:
Bachelor of Science degree in Mechanical Engineering or Electromechanical Engineering or equivalent.
Minimum 2-5 years of automotive experience.
Automotive transmission or driveline systems experience preferred.
Technical Expertise:
Strong personal computer skills required, including experience with MS Office software.
Proficient knowledge of engineering principles, GD&T, DVP&R, APQP and manufacturing processes.
Methodical Competence:
Excellent problem-solving skills, especially with detailed problem analysis and resolution
A systematic worker with perseverance
Senior Mechanical Engineer
Project Engineer Job 8 miles from Novi
Purpose of this Job:
This job is responsible for developing products in compliance with Sanden and customer requirements.
This role will include compressor concept development, design, testing, and reporting with engineering theory/logic.
This role will also include training for other engineers and staff.
Other responsibilities include technical support for projects related to manufacturing.
Principle Duties/Essential Functions:
Execute product development by achieving technical goals.
Achieve technical goals and tasks with PDCA for product development.
Develop engineering solutions for suppliers and cross-functional members to meet required needs.
Develop engineering laboratory testing methods and equipment.
Coach/mentor engineers and other staff based on expertise.
Achieve departmental execution plans and goals by product development.
Ability to develop new concept design products.
Achieve technical goals and tasks with PDCA for product development including cross-functional activity.
Develop engineering solutions for external customers, suppliers, and cross-functional members to meet required needs.
Develop global engineering laboratory testing methods and equipment.
Achieve design consensus by resolving technical issues globally.
Coach/mentor engineers and other staff for Design Engineering growth based on expertise.
Other Tasks/Responsibilities:
Work with other Sanden locations to ensure product designs are consistent.
Provide technical support to internal and external customers.
Ability to conduct technical feasibility studies for new development.
Support / participate in the project team(s) as an engineering expert.
Establish engineering reports independently.
Establish technical presentation material for internal and external customers as needed.
Responsible for awareness and compliance with company Environmental, Health, and Safety (EHS) policies, procedures and regulatory requirements. Contributing to the effectiveness of the EHS policies and procedures by communicating and reporting unsafe conditions and/or non-compliance.
Other projects as assigned by management.
Competencies:
Critical Thinking
Technical Knowledge
Interpersonal and Teamworking Skills
Active Learning
Organizational Skills
Innovative Thinking
Requirements
Education:
Bachelor of Science Degree in Engineering (BSME preferred), Masters' Degree in Engineering preferred
Knowledge, Skills, and Experience:
7+ years' experience in automotive application design, compressor development, FEA analysis knowledge, Vehicle and compressor Testing knowledge / Skills, and HVAC system knowledge.
Working knowledge of current computer technology and applications such as CAD, CAE, and MS Office applications.
Good communication skills with internal and external customers.
Knowledgeable of IATF-16949 and ISO-14001 procedures.
Licenses or Certifications:
EPA-608, EPA-609 are desired
Physical Demands:
Routine lifting of 25 lb. loads (compressors) may be necessary.
Possible exposure to high noise levels.
Possible exposure to chemicals (oils, refrigerants, solvents).
Work Environment:
Work conditions are consistent with a general office environment. Sitting for extended periods of time will require good office ergonomics. Potential exposure to the manufacturing environment will require the understanding and use of required PPE applicable to that environment.
Friendly, diverse culture.
Engaging and collaborative co-workers.
Open office layout promotes conversation and teamwork to drive results.
Benefits:
Health, Dental and Vision Insurance
Paid Time Off (PTO)
Retirement Plan
Disability Insurance
Flexible work schedule
Mechanical Engineer - Fire Protection Systems
Project Engineer Job 21 miles from Novi
My name is Amber Zander, a Recruiting Specialist with SCN (*****************
We are partnering with a Fire Protection Company who is hiring for a Mechanical Engineer - Fire Protection Systems.
Company Highlights
Leading provider of industrial fire protection solutions
Specializes in designing and implementing fire protection systems for large-scale industrial facilities
Works with heavy-duty industrial plants to ensure safety and compliance
Provides innovative engineering solutions for fire protection and piping systems
Position Highlights
Title: Mechanical Engineer - Fire Protection Systems
Full Time Direct Hire
100% On-Site - Troy, MI
Background Requirements
Bachelor's degree in Mechanical Engineering (BSME) required
Minimum 5 years of experience in industrial fire protection system design (commercial or apartment building experience will not be considered)
Professional Engineer (PE) license preferred
NICET certification preferred
Strong understanding of mechanical systems in heavy-duty industrial plants
Job Responsibilities
Design industrial fire protection systems, including chilled water piping, hot water piping, compressed air piping, and gas piping
Perform proper sizing, design, and layout of systems, including all valves, chillers, and pumps
Ensure compliance with industry standards and client specifications
Collaborate with cross-functional teams, contractors, and clients to deliver high-quality solutions
Utilize engineering software and tools for system modeling and design
What is Being Offered
Challenge: Work on large-scale industrial fire protection projects with a leading company
Location: Troy, MI (100% on-site)
Advancement: Opportunity to grow within a specialized industrial engineering environment
People / Culture: Collaborative and technically driven work environment
Stability: Established company with a strong industry presence
If you are interested and qualified, please send your updated resume as an MS Word document, along with details on how you fit this specific position, to ************************.
Thank you for your consideration!
Project Engineer (Industrial Automation)
Project Engineer Job 26 miles from Novi
**DIRECT HIRE**
We are looking for a Project Engineer with 2-4 years of work experience from an industrial automation background. Experience with an integrator involved in the automotive assembly business is a plus.
Mode: 100% Onsite
Travel: 20% to customer sites
Pay: $90-$95K/yr
Job Description:
Take responsibility for assignments from the Project Management Functional Head or assigned Project Manager through the various phases of design, manufacturing, build/integration, and installation/commissioning milestones.
The Project Engineer will manage project tasks and assignments promptly in support of project milestones and goals.
Required Skills/Experience:
Ability to aid a Project Manager in the identification documentation of issues, in process or design, on a project.
Ability to aid project managers in developing project reporting for customers and executive management.
Good AutoCAD experience with the ability to use 3D viewers to review and understand designs.
Ability to prioritize tasks.
Ability to check and understand mechanical drawings and recognize sound mechanical design.
Types of Automation Platforms experience ideally will include exposure to: Cartesian Gantry systems, Articulating Robotic and robot rail systems, various conveyors and part conveying systems, orientation, inspection devices, and Pneumatic and servo Pick and place devices.
Ability to assist with documenting open issues and minutes of meetings (MOMs)
Ability to assist in debugging, Run-off, Installation, training, and startup activities at Wipro-Pari and customer sites.
Qualifications:
Bachelor of Science Degree in Engineering
Additional Skills (required)
Experience working with global teams will be considered a plus.
Experience working in a diverse multi-cultural environment.
Chassis Product Engineer - Wheel - CP2870 (1399764)
Project Engineer Job 21 miles from Novi
The wheel engineer is responsible for the development of the wheel diversity and allocation across a new model project, and all variants requiring unique wheels. This engineer works directly with the studio on new wheel style and concept designs. The engineer determines the appropriate wheel offset, pilot bores, wheel mounting face and bolt pattern, rim flange design, TRA/ETRTO compatibility, structural integrity via FEA analysis, bearing package, wheel brake package. The result is a wheel design which meets the design and integrity of the product specification and is feasible to manufacture. The engineer works directly with studio designers, studio CAE engineers, and chassis designers. Interface with chassis brake and driveline engineers, as well as CCLP project team. The resulting wheel designs are then forwarded to the execution team (wheel release engineers) to prepare sourcing documents for business placement, then proceeds with final wheel design and development and testing for validation.
Requirements:
***Onsite 4-5 days per week***
Bachelor of Science Degree in Mechanical Engineering
3 years wheel engineering design and development experience
Demonstration of automobile interest (automobile hobby, college project)
Demonstration of passion to work in the automotive industry.
Project Engineer - Modular Data Center
Project Engineer Job 25 miles from Novi
Project Engineer - Data Center Modular Design & Construction
We are seeking a highly motivated Project Engineer with a strong technical background in mechanical, electrical, and modular construction systems. This role requires expertise in HVAC, piping, electrical distribution, and prefabrication for data centers and modular construction projects. The ideal candidate will support project execution by assisting with design coordination, submittals, fabrication drawings, and field operations.
Technical Skills & Experience
Bachelor's degree in Mechanical, Electrical, or Civil Engineering, or equivalent experience in construction and modular systems.
Strong understanding of chilled water piping, refrigerant piping, and HVAC system design.
Familiarity with power distribution, switchgear, UPS systems, and grounding requirements for data centers.
Experience with offsite fabrication, modular skids, and preassembled mechanical/electrical systems.
Ability to review, interpret, and coordinate design drawings, engineering specs, and Revit/BIM models.
Experience generating detailed construction and fabrication drawings to support manufacturing and installation.
Proven ability to create, review, and track submittals for client and contractor approval.
Ability to assist with scheduling, budgeting, RFIs, submittals, and change orders.
Experience working with installers, contractors, and commissioning teams to ensure smooth project execution.
Familiarity with ASHRAE, NEC, NFPA, and IBC codes relevant to modular data centers.
Software Proficiency:
Experience with AutoCAD, Revit, Bluebeam, MS Project, and construction management platforms (e.g., Procore, BIM 360, Primavera).
Preferred Qualifications:
3+ years of experience in engineering, construction, or modular data center projects.
Experience working with prefabrication and modular assembly.
Knowledge of MEP system integration in data centers or industrial facilities.
PMP certification or prior experience in project management is a plus.
Mechanical Engineer / Designer I
Project Engineer Job 15 miles from Novi
Responsibilities:
Work with our Sr. Mechanical Engineers to complete calculations, drawings, and specifications.
Coordinate with our multi-disciplined office to provide technical design support and prepare design / construction documents in accordance with project expectations.
Support project team.
Assist other teams as required to meet project goals and timelines.
Conduct site visits for verification of facilities as required.
Mechanical Experience Desired:
HVAC Systems
Facility Process Engineering
Chilled Water System
Hot Water System
Energy Study Utilization
Fire Protection
Qualifications:
Bachelor's degree in Mechanical Engineering.
Experience in AutoCAD and REVIT.
Knowledge of industry standard software.
Excellent written and verbal communication skills.
Creative, detail oriented, self-motivated.
Ability to multi-task.
Willingness to work with all facets of our team.
Design Engineer
Project Engineer Job 22 miles from Novi
Our client is looking for a Lighting Design Engineer to create lighting systems for various environments, optimizing visibility, energy efficiency, and ambiance, while ensuring compliance with safety standards and regulatory requirements.
Diverse projects. Drive to Innovate. Collaborative team. Employee Owned. Work-Life Balance.
Full-time positions also offer competitive salary and benefits, 401K with employer match, discretionary bonuses, vacation and sick time, and a hybrid work arrangement.???
Responsibilities
Designing energy efficient lighting and control systems
Performing photometric and energy usage calculations including ComCheck reports
Ensuring designs comply with local codes, national standards (NEC, NFPA, etc.), and client specifications
Developing lighting plans with circuiting and controls, photometric plans, and fixture schedules
Developing illuminance and control schedules complying with codes and user requirements
Developing generic and project specific control wiring diagrams
Developing lighting system studies and reports
Assisting in gathering and evaluating information for engineering studies
Collaborating with architects, mechanical engineers, and other technical disciplines to integrate lighting and control systems into building designs
Incorporating sustainable design practices to support LEED, WELL, or other green building certifications
Reviewing shop drawings, RFIs, and submittals to ensure construction accuracy
Meeting with clients to understand their needs and propose lighting and control system solutions
Presenting technical concepts in a clear and compelling manner to both technical and non-technical stakeholders
Guiding junior engineers and reviewing their work to ensure accuracy and adherence to standards
Staying up to date with industry trends, new codes, and emerging technologies to enhance firm capabilities
Some travel may be required
Qualifications
Minimum bachelor's degree in electrical engineering, lighting design, or related field
5-7 years of relevant lighting design experience in the A/E industry
NCQLP LC Certification
Working knowledge of ASRHRAE 90.1, Chapter 9 and IES Lighting Library Standards
Proficiency in Revit and Microsoft Office programs
Experience with lighting software, preferably Visual Lighting; proficiency with comparable software (i.e.,AGi32) is acceptable
Strong oral and written communication skills
Professional demeanor and understanding of workplace conduct
Project Engineer
Project Engineer Job 14 miles from Novi
Looking to work for a leading system integrator offering unique solutions to multiple industries?
Open to learning new things & developing high-performance products?
Do you want to be at the forefront of engineering in a business always looking for ways to improve its products & offering to customers?
We're looking for a Project Engineer who enjoys working taking project ownership & leading a small team on custom assembly solutions.
What you'll do:
Creating & maintaining technical documentation.
Working on prototyping, trouble shooting & design improvements.
Work closely with customers to interpret requirements into design.
Collaborate with cross-functional teams to conceptualize, design, and develop mechanical systems, components, and products.
Design using Solidworks to create detailed 3D models and engineering drawings for manufacturing.
Optimize designs for performance, manufacturability, and cost-effectiveness while considering regulatory and safety requirements.
What you'll need:
A background in machinery or tooling.
Experience in automation.
Experience with a 3D CAD software (Solidworks or Inventor)
Great communication & background in collaborating with a cross-functional team.
Working knowledge of FEA.
Experience with GD&T.
Mechanical Engineer III
Project Engineer Job 15 miles from Novi
Responsibilities:
Lead Mechanical department and provide technical design support.
Assist in the preparation of schematic designs, construction documents and specifications in compliance with owner's requirements and ensure governmental code compliance.
Execute mechanical design from conceptual design through construction documents.
Develop mechanical system layouts and identify equipment sizing/selection.
Perform plumbing schematic design of air systems, fans, ducting, etc.
Review design calculations, drawings, specifications, design analysis and construction cost estimates.
Perform construction related services including shop drawing reviews, response to requests for information, conduct field / site surveys and observations.
Collaborate and coordinate design with engineers, architects, designers, owners, product manufacturers, vendors and building contractors as required.
Responsible for insuring accuracy and content of construction documents and coordination with other disciplines.
Knowledge of Lean Manufacturing methods and processes.
Maintain continuing professional education in discipline.
Attend coordination meetings and conduct site visits as required.
Mechanical Experience Required:
Project Management
HVAC Systems
Facility Process Engineering
Chilled Water System
Hot Water System
Energy Study Utilization
Fire Protection
Qualifications:
Bachelor's degree in Mechanical Engineering, Masters preferred.
Minimum 10+ years of relevant work experience.
Licensed PE.
LEED certified.
Knowledge of industry technical software.
Strong leadership skills - ability to motivate and direct team.
Excellent written and verbal communication skills.