Project Engineer Jobs in Bear, DE

Title: Principal Mechanical Engineer Report: VP of Engineering Position Type: Full Time, Exempt Travel: Occasional , LLC Are you passionate about making a difference in the fight against climate change? Then AirJoule is the place for you! We are a joint venture between GE Vernova and AirJoule Technologies (formerly Montana Technologies), and a leader in the global sustainability transition. Our revolutionary atmosphere water harvesting technology enable transformative HVAC products that help our customers save money on their energy bills while reducing their environmental impact. The same core technology also enables atmospheric water harvesting products that create clean, abundant, and decentralized water for industrial, commercial, and humanitarian purposes. If you are a highly motivated and experienced individual who wants to make a real-world impact, we encourage you to apply! Position Summary AirJoule is seeking a Principal Mechanical Engineer to help our team design and build our transformative atmospheric water generating products. This role requires expertise and hands-on experience in mechanical engineering design and building. With regards to mechanical design, expertise with CAD programs such as CATIA, SolidWorks, SolidWorks Simulation, and Ansys is required. Familiarity with compressors, condensers, heat exchangers (liquid-liquid and air-liquid), electric drive motors, machined and molded parts, and electronically controlled sensors and actuators is desired. This role also requires significant experience as a technical lead for a design team. The successful candidate will lead a design team which is primary based in Newark, DE, but with satellite locations in our other domestic sites. Ability to manage and lead a complex workstream is mandatory. The role will also involve the transitioning of initial builds into manufacturing procedures. Your responsibilities will range from building, testing, and troubleshooting prototype units, testing and validating new components and system designs, as well as communicating your learnings with the broader team and working groups. In this role you can make a significant impact to society and support the launch of our revolutionary products into the world! Key Responsibilities To perform in this position successfully, an individual must be able to perform each key responsibility satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned to meet business needs. Project Leadership: Execution of engineering projects from conception to commercialization, ensuring adherence to timelines, budgets, and quality standards. Monitor project progress and identify potential risks or issues, implementing mitigation strategies as needed. Mentor junior colleagues for the development of overall AirJoule capabilities. Participate and Lead Component Working Groups Joining our group of mechanical engineers, you will take a key role in leading design efforts in order to take our engineering concepts from paper to product. Communicate clearly and deliver against weekly actions assigned to you or from you to help advance our productization roadmap. Use mechanical design software to communicate designs to the broader team. Technical Expertise in Prototype Designing, Troubleshooting, and Transitioning to Manufacturing Working with our engineering teams, create new system builds at the Newark location, run through shakedown and operationalize them. Owning mechanical designs and CAD models derived from Solidworks or related software. Hands-on prototype building including mechanical, electrical, and thermal considerations Familiarity with vacuum systems, vapor compression, motor drives, electronically controlled actuators, etc… Education and Experience Requirements Minimum Education: BS degree in Mechanical Engineering (or related field) and a minimum of 15 years of experience, or MS degree and 12 years of experience, OR a PhD and 10 years of experience. Minimum Experience: 10+ years of experience designing and building novel mechanical systems. Knowledge, Skills and Abilities Significant experience with CAD and building of mechanical systems, especially with respect to rapid prototyping, as well as progression from prototypes to commercial products. This includes deep knowledge of system modeling (CAD - CATIA, SolidWorks, SolidWorks Simulation, Ansys, EES, Matlab, etc…). Experience with the design, analysis, and testing of mechanical components such as vacuum chambers, pumps, compressors, shafts, bearings, dampers, couplings, seals, gears, etc… HVAC systems or component experience is preferred. Experience solving complex energy components/mechanical systems and/or thermal management problems for energy systems. Fundamental knowledge of fluid mechanics and heat transfer applied to thermal management problems. Experience working with suppliers and machinists to procure the properly designed and fabricated parts. Ability to work under pressure, meet deadlines, and be flexible with company pivots. Champion of safety on the plant floor, defining safe operating procedures, performing safety audits, and being a prime example defining the safety culture. Physical Requirements Extended periods of walking and standing as well as sitting at a desk and working on a computer. Must be able to lift, carry, push and pull up to 30 pounds. Occasional bending, stooping, reaching, and stepping on and off a build platform. Must possess a high degree of manual dexterity to assemble mechanical devices. Must be able to wear personal protective equipment (PPE) such as safety glasses, gloves, etc. Other Requirements Applicants must be authorized to work for any employer in the U.S. AirJoule is unable to sponsor or take over sponsorship of an employment Visa at this time. AirJoule's Benefits In addition to good working conditions and competitive pay, it is AirJoule's policy to provide a comprehensive benefits package that provides access to plans which support the overall wellbeing of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes a 401K, Life Insurance options, Disability coverage, paid time-off, and more. How to Apply Qualified applicants should submit their resume with a cover letter outlining their qualifications to Human Resources via email at ******************* AirJoule, LLC does not discriminate on the basis of actual or perceived race, religion, color, national origin, ancestry, disability, medical condition, marital status, sex, age, sexual orientation, gender identity or expression, family responsibility, personal appearance, genetic information, matriculation, political affiliation, or any other status protected under law.

About Our Client: Our Hiring Company, a best-in-class Medical Device Manufacturer has an opening for a new team member at their facility. Holding itself to the highest standards of integrity, quality and excellence, this company has contributed to the healthcare industry for over 90 years and has been rated as Forbes top 14 most innovative companies in the world. With a strong vision for making medical treatments easier on its patients, this company gears its technological innovations from its top-talented engineers towards making a significant contribution to our society. Key Responsibilities: Leading structured and interdisciplinary development of product systems from concept to production. Collaborating with cross-functional teams to ensure product development aligns with customer needs and regulatory requirements. Maintaining and following the company's quality system requirements, including change control, validation, documentation, and design controls. Providing cross-functional leadership as the product integrity group representative in NPD projects. Ensuring a consistent approach in product development to deliver high-quality, customer-focused products. Coordinating with internal teams and external partners to drive results and ensure quality. Troubleshooting system-level issues through hands-on problem-solving and cross-functional collaboration. Leading human factors and usability activities to ensure clinical acceptability of new products. Participating in design, development, and testing activities to uphold product design intent. Defining and writing test plans/protocols, performing testing, analyzing results, and documenting findings in technical reports for regulatory submissions. Coordinating design verification activities and supporting the development of test methodologies. Managing partnerships with external organizations for design, prototyping, testing, and validation. Ensuring cost viability of new products throughout the development cycle. Preparing and leading portions of design reviews with cross-functional teams. Contributing to project team meetings with innovative ideas and process improvements. Planning and scheduling technical objectives, coordinating resources, and ensuring proper documentation. Qualifications: Bachelor's degree in Mechanical Engineering or Biomedical Engineering. 3+ years of experience with product development and design controls. Experience in an FDA-regulated industry (medical device or pharmaceutical). Hands-on experience in the product development life cycle and understanding of test method development. Ability to provide technical oversight, lead design input documentation, and support product specification completion. Strong analytical and problem-solving skills for solving moderately complex system-level issues. Strong communication skills, including the ability to explain complex engineering problems to non-engineers, present to executive management, and develop detailed technical reports for regulatory submissions. Strong coordination skills to align cross-functional and external teams to deliver high-quality products. Ability to implement systems engineering strategies and evaluate alternative product designs, processes, and test methods. Experience in creating documentation for Design History Files (DHF) and regulatory filings. Ability to define, write, and execute test protocols, including design verification. Experience in technical drawing review and approval. Ability to work with engineering drawings, specifications, and marketing requirements. Familiarity with mechanical, electronic, and chemical equipment used in laboratory testing. Willingness to travel for clinical observations, trade shows, training, and supplier visits (vendor credentialing required). Experience with SolidWorks is preferred. Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Come join a growing multidisciplinary team of designers and engineers designing the next-generation nuclear power plant. EGS is seeking applicants for the role of HVAC Design Engineer. The Engineer is responsible for the design of HVAC systems for buildings in the power plant. This role requires frequent interfacing with other engineering disciplines and licensing groups as well as capable management of system integration activities. The Engineer must be eager to learn new skills to create feasible/practical solutions to challenging design problems. The Engineer will be part of a team executing a U.S. Government cost-shared development program requiring efficient completion of engineering assignments. Positions are available in Camden, NJ, Pittsburgh, PA and Covert, MI. Top competitive salaries, great benefits and relocation assistance available. MUST BE US CITIZEN OR PERMANENT RESIDENT. Specific Areas of Responsibility: Design HVAC systems for power plant buildings Assist contractors designing HVAC systems with recommendations Consult with vendors to develop new designs to meet unique challenges Review process flow diagrams, piping/ducting and instrumentation diagrams (P&ID/D&ID), system descriptions, specifications, thermal and pressure loss calculations, and control logic. Develop calculations for breathing air required for enclosed spaces, and air leakages from rooms/buildings. Develop equipment specifications and interact with vendors to obtain vendor input/design confirmation of various components. Review vendor/contractor designs to ensure compliance with the industry standards and system/component requirements. Applicants should be prepared to play an active role in a project-driven and highly integrated engineering team. Minimum Requirements: BS in Engineering from an ABET-accredited program is required. Strong academic background in HVAC. 10+ years of experience in the design of HVAC systems for the energy industry. Effective communication, organizational and interpersonal skills. Excellent attention to detail and capable of producing error-free documents. Effective communication, organizational, and interpersonal skills. Strong math, analytical, problem-solving, and computer skills. Eligible to work under 10 CFR Part 810. Optional Additional Qualifications: Master's degree in chemical engineering, mechanical engineering, nuclear engineering, or closely related field. Industry experience in designing HVAC systems for nuclear power plants Experience working with engineers and fabricators to develop designs and drawings. Knowledge and understanding of ASHRAE standards. PE License Experience with using AutoCAD.

About Us: At Top Gun, we are at the forefront of propulsion technology, delivering cutting-edge solutions for aerospace, defense, and high-tech industries. With a focus on innovation, precision, and performance, we pride ourselves on providing a collaborative, dynamic work environment that allows our team to push the boundaries of what's possible. As a company, we are committed to excellence in design, testing, and integration, and we believe in nurturing a hands-on culture where every team member plays a critical role in shaping the future of propulsion systems. We are seeking a Propulsion Engineer/Scientist who thrives in a hands-on, fast-paced environment. Whether you hold a BS, MS, or Ph.D., if you are excited to dive into testing, design, and system optimization, we want you to be part of our growing team. Key Responsibilities: Design & Analysis: Engage in the design, modeling, and simulation of propulsion systems, including engines, thrusters, and related components. Testing & Validation: Take a direct role in hands-on testing and performance evaluation of propulsion systems, from ground tests to system integration. System Integration: Work alongside a multi-disciplinary team to integrate propulsion systems into larger, complex platforms and systems. Prototype Development: Build, modify, and troubleshoot physical prototypes, ensuring they meet strict performance and safety specifications. Optimization: Analyze system performance and suggest adjustments to improve efficiency, reliability, and performance. Innovation: Contribute to research and development initiatives aimed at pushing the limits of propulsion technologies. Documentation & Reporting: Document test results, analysis, and design specifications, ensuring clear communication across departments. Qualifications: A BS, MS, or Ph.D. in Aerospace Engineering, Mechanical Engineering, Physics, or a related field. Strong hands-on experience in propulsion system testing, integration, and optimization. Proficiency in design and analysis tools for propulsion systems (CFD, FEA, wind tunnels, test rigs, etc.). Solid knowledge of propulsion components, such as combustion chambers, turbines, and rocket engines. Practical experience in working with prototypes and hands-on testing equipment. A proactive, problem-solving mindset, eager to be involved in every aspect of system design and testing. Strong ability to work collaboratively within a team environment. Excellent communication skills, with the ability to present complex technical data clearly. Why Join Us? Innovative Projects: Work on cutting-edge propulsion systems that are shaping the future of aerospace and defense. Hands-On Experience: This is a role where you will be directly involved in testing and building real-world systems from the ground up. Professional Growth: We offer numerous opportunities for personal and professional development in a highly technical and supportive environment. Dynamic Team: Join a team of passionate engineers and scientists who value creativity, collaboration, and hands-on problem solving. Competitive Compensation & Benefits: We offer a competitive salary, health benefits, retirement plans, and additional perks. At Top Gun, we're committed to pushing the limits of propulsion technology, and we need passionate, driven individuals to help us get there. If you're ready to take your career to the next level and make a significant impact, we encourage you to apply. Apply Now and Take Your Career to New Heights with Top Gun in Orlando, Florida!

The Senior Electrical Engineer will perform all phases of electrical-related projects from conception through start-up and delivery, including electrical system model development and evaluation, specification of electrical distribution equipment, development of construction package drawings, serve as a point of contact with client personnel and support startup and commission efforts. The ideal candidate should be familiar with the development of control systems and be able to support in-house I&C engineering efforts. Technical Knowledge: Develop complete electrical drawing packages as part of construction packages Develop electrical drawings and documents that include one-line drawings, power plans, hazard classification maps, cable routing (cable tray/raceways), cable & conduit schedules, grounding and lighting plans (including photometric studies) Specify and select electrical distribution equipment (Switchgear, MCCs, VFDs, UPSs) Develops technical, scope, and cost aspects of proposals Provide General Electrical Engineering Perform SKM calculations Direct quality checking for all deliverables Advanced/specialized training and experience relating to the discipline of interest Ability to prioritize tasks by frequency and importance Ability to work in physically demanding environments Attention to detail with excellent written and verbal communication skills Qualifications: Minimum Bachelor of Science degree in Engineering 5 to 20+ years of demonstrated Electrical Engineering experience in a multi-discipline environment in the energy, chemical, and/or oil and gas industries Professional Engineer License preferred - may consider EIT who can obtain PE in one year Demonstrated experience as a Lead Electrical Engineer, supervising other Electrical Engineers, and mentoring younger Electrical Engineers Required knowledge of the National Electrical Code (NEC) and industry design standards Familiarity with electrical-related software such as SKM or ETAP Increasing ability to perform electrical system-related calculations such as short circuit analysis, arc flash evaluation and development of arc flash remediation strategies Increasing knowledge of unique or specific problem-solving approaches Increasing ability to apply knowledge in broad areas of assignments, especially projects concerned with unique or specialized problems Low to high voltage familiarity (480VAC to 25Kv) Non-Technical Skills: Ability to plan, develop, and coordinate a large project or several small projects Supervise the work of others, both engineers and designers Functions as Project Engineer and Project Leader on single discipline projects Interfaces directly with the client's representative as necessary Field survey work required in heavy industrial environments Certifies designs and drawings as appropriate Maintains project schedules, develops designs, and reviews drawings, specifications and calculations Requires little to no supervision Can assist in the development of the technical scope of work specifications Travel up to 10% of the time - Local day trips/client visits (Pennsylvania, New Jersey, Delaware, Maryland)

Worthington Armstrong Venture Worthington Armstrong Venture (WAVE), a joint venture between Worthington Industries and Armstrong World Industries, has established worldwide leadership in the production of suspended ceiling systems. WAVE produces metal ceiling grids that can be combined with Armstrong ceiling boards as a complete package or sold individually. Founded in 1992, WAVE operates under a long-standing corporate philosophy rooted in the golden rule. This philosophy serves as an unwavering commitment to the customer, supplier, and shareholder, and it serves as the foundation for one of the strongest employee-employer partnerships in American industry. For more information about our products, please visit ************************************ Structural Engineer This position requires thorough knowledge of structural design and engineering techniques to perform structural analysis, engineering, and drafting tasks related to cold formed steel framing in building construction. Responsibilities include providing design analysis to external customers in a professional and timely manner as well as using technical expertise and specific skill sets to support internal new product and equipment development in its design, manufacturing and implementation. The Structural Engineer will devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices. This position will report to the Technical Services Manager, who is responsible for product design, product testing, and code compliance, as well as driving strategic code changes in line with the corporate strategy. Primary Responsibilities Uses input from production and other outside sources (sales, finance, customers) to solve complex technical problems associated with engineering assignments, gathers and analyzes data; perform structural calculations; develops technical programs; designs involved equipment systems; recommends commercial equipment and components. Performs structural design and analysis calculations using governing codes and standards, engineering formulas, skills, and experience. Layout and details portions of projects using schematic layout by project lead engineer. May be assigned responsibility for schematic or conceptual layouts when qualified. Provides drawing for own designs. Researches design options and document findings for project lead engineer. Reviews shop drawings. Assumes the lead engineer's role on assigned projects or coordinates own individual effort with efforts of assigned support, plant management, and appropriate corporate departments to insure conformance to objectives. Issues engineering documents for production changes. Utilizes Engineering Change Notice Program to effectively communicate changes in equipment and products. Serve to support new products and equipment development in both design and implementation. Receive sales requests on specified need and process request through use of engineering/design software. Create prototype equipment to conduct field test and initial analysis. Design and manufacture production equipment using vendor and third-party sources, with the end result being to manufacture WAVE product.Follow up with customer and manufacturing using statistics to determine level of satisfaction with product. Applies best available technology to the solution of the project's technical problems, keeps abreast of latest developments in his/her discipline, pertinent regulations, and safety requirements. Recommends training for him/herself and specific group based on experience in application of new technology or growth of a particularly useful methodology. Key Performance Indicators Safety Performance - OSHA rate, compliance to codes and policies, evidence of reducing risks. Project Management - safety, cost, schedule, standard work, and performance commitments. Engineering - Product design support and analysis, drawing revisions, quality inspections, lean integration, and concept-to-execution ease. Other - technical feasibility, vendor relationships, innovation, stakeholder communication, and local resource collaboration. Qualifications Education, Experience, and/or Training Required; 5+ years relevant experience in structural/civil engineering, or similar. Preferred; 5+ years relevant experience in manufacturing environment, or similar Required; BS in Engineering or equivalent combination of experience and education. Preferred; PE or EIT Knowledge, Skills and Abilities Formal education structural engineering and component design and application Formal education or comparable experience in design and assembly of structural building components, framing standards, and installation methods Proficiency in the use of computer software (AutoDesk applications) to perform analysis required. AutoCAD required, Inventor preferred. Design experience and familiarity with International Building Code (IBC) and ASCE7, Minimum Design Loads and Associated Criteria for Buildings and Other Structures Results-oriented professional who can work across organizational lines and achieve business objectives through personal initiative. Strong knowledge of process improvement tools/techniques. Strong oral and written communications skills. Demonstrate the ability to identify complex problems and develop corrective action plan to implement solutions. Working knowledge of relevant manufacturing disciplines, cost control, planning, and industry safety regulations. Experience with project management tools. Proficiency in Microsoft Office (Outlook, Excel, and Word).

About Us: TD&H Engineering, an employee-owned, mid-sized, multi-discipline engineering firm, is looking for an engineer to join our precast concrete design team. We pride ourselves on offering a collaborative and supportive work environment, with a strong emphasis on professional development and career advancement. Our team of over 150 professionals' spans across offices in Montana, Idaho, Washington, North Dakota, and Pennsylvania, providing a wide range of services to a diverse clientele throughout of the United States. Job Overview: The Media, PA regional office is seeking a full-time Project Engineer to join our precast concrete team. This role focuses on structural precast concrete design and detailing, but the candidate will be required to do Building Information Modeling (BIM) design for precast concrete structures using Tekla PC, as well as QA/QC and review of precast concrete erection and fabrication drawings. The successful candidate will work under the guidance of experienced project managers, all holding professional engineering licenses. Our Media office offers a dynamic yet relaxed work environment, characterized by a small, supportive team and a stable workload. Our precast projects encompass a wide range of structural types, including warehouses, parking garages, data centers, architectural cladding, and other various precast concrete pieces such as culverts, etc. Key Responsibilities: Work with project managers and team to design and detail various types of Precast Concrete projects. Review construction documents and issue RFI's (Request for Information) for clarification of design and detailing information. Review erection drawings and fabrication drawings for conformance to design, applicable building codes, and construction documents. Collaborate with project managers, engineers, and clients on multiple projects ensuring timely completion. Prepare and organize detailed technical calculation reports for precast concrete members and connection designs. Provide accurate and efficient lateral and bearing component and connection design as required. Direct project designers with modeling and drawing questions and assist entry level engineers with technical questions. Provide field support to the erector and contractor by responding expeditiously to field related issues and inquiries, proposing practical solutions and submitting sealed letters with detailed corrections. Qualifications: Engineer-in-Training (E.I.T.) licensure is required, Professional Engineering (P.E.) licensure preferred. Strong computer skills in Microsoft Word, Excel, Outlook, and able to use technical software such as Eriksson Beam and Lecwall. 3+ years of experience in precast concrete or structural concrete design. B.S. Degree in Civil or Structural Engineering. Proficiency in Tekla Structures PC, AutoCAD, and/or Revit (3D BIM experience is desirable). Excellent organization and communication skills. Experience with precast concrete detailing on various types of projects including buildings, warehouses, utility and municipal structures, parking garages, etc. Proven experience reviewing architectural and structural plans to identify precast concrete component requirements, laying out erection drawings, producing fabrication drawings, and performing comprehensive QA/QC. Proven ability to multitask and manage project workload, deadlines, and clients effectively in a fast-paced environment. What We Offer: Competitive compensation. Benefits package including Medical, Vision, & Dental. Short & Long-term Disability insurance. Generous Paid Time Off (PTO) accrual. 401k with employer match. Employee Stock Ownership Plan (ESOP). End-of-year performance bonuses. Opportunities for continuing education and career advancement. TD&H is proud to be an Equal Opportunity Employer.

Triple Crown is a leading provider of hardware, embedded, software, and mechanical engineering talent. Businesses and technology teams, from Fortune 500 enterprises to emerging startups, rely on our ability to rapidly place the developers, architects, coders, and designers who engineer digital transformation and growth. CONTRACT Position: 12+ Months Location: Onsite in King of Prussia, PA *Active Clearance is REQUIRED* The Electrical Engineer will play a critical role, serving as the AFS CPE (Arming and Fuzing Subsystem Certified Principal Engineer) responsible for ensuring the successful refurbishment of fuzes. This individual will utilize their technical expertise to troubleshoot and resolve complex electrical issues, collaborating with cross-functional teams to identify and implement solutions. With a focus on refurbishment rather than design, the ideal candidate will possess strong analytical and problem-solving skills, as well as exceptional organizational abilities to manage multiple tasks and priorities. As a key contributor to the program, the IC3 Electrical Engineer will work closely with stakeholders to ensure timely and high-quality delivery of refurbished fuzes. Job Description: Bachelor's degree in Electrical Engineering or related field Strong understanding of electrical engineering principles and concepts Experience with troubleshooting and resolving complex electrical issues Excellent organizational and time management skills, with ability to prioritize multiple tasks and deadlines Strong analytical and problem-solving skills, with attention to detail and ability to identify root causes of issues Effective communication and collaboration skills, with ability to work with cross-functional teams Skills: Electrical Engineering Electrical Design AutoCAD MATLAB Power Systems Benefits: Paid weekly! Health, Dental and Vision Insurance 401k

Insight Global is currently seeking a remote Substation CAD Design Engineer. This person will be responsible for developing Physical (HV/CIV) models using AutoDesk Inventor and associate required iProperty information. Other responsibilities include: Create/develop Inventor parts and assemblies for the use within an electric substation. Assemble Inventor parts and assemblies into full electric substations. Add and manage part and assembly specific data within the models and AutoDesk Vault. Assist in configuring the AutoDesk Inventor environment. Create AutoDesk Inventor drawings from electric substation models. Convert High Voltage and Civil design standards into models and smart drawings. Manage drawings and data within AutoDesk Vault. Develop required procedures, job aids and flow charts in support of the Intelligent CAD implementation. Develop and manage the AutoDesk Inventor, Spatial Business Systems, and Autodesk Vault databases utilizing existing other data sources to ensure content is data rich. Compensation: $55/hr to $62/hr. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

MUST HAVE AN ACTIVE SECRET CLEARANCE. Support a Fortune 500 Aero-Defense Company as an Electrical Engineer (Power & Interface Technical Lead) Required Skills • Strong fundamentals in electrical engineering subdisciplines: power electronics, analog design, mixed signal design • Experience with electrical parts stress analysis (EPSA) and worst case circuit analysis (WCCA) • Printed Wiring Board (PWB) design experience - rigid, rigid-flex, and flex • Strong understanding of SPICE simulations (LTSpice, Pspice or equivalent) Desired Skills • Experience with analyzing circuits during and after radiation events (SGEMP, single event effects, degradation effects, etc.) • Leadership experience of a multi-disciplinary team • Electrical Interface Requirements development and verification • Experience with Integration Testing, EMI testing, Frequency Response Analyzer Testing (Bode plots), Environmental Testing • Familiarity with qualification to military standards (MIL-STD-461, MIL-STD-1576, etc) • Experience working with subcontracted design items (specification and statement of work development, following design through qualification) • Experience with root cause analysis and failure analysis • DC-DC converter design experience • Signal integrity and controlled impedance design experience

Electrical Engineer (FPGA) Role Description Salary: $130,000 - $250,000 (based on seniority), plus approximately $10,000 401k bonus Experience Level: 3-10 years Clearance Requirement: Active Secret Clearance Position Overview: We are seeking highly motivated FPGA Engineers to support cutting-edge research, development, and prototyping efforts at Aberdeen Proving Ground. This role involves designing, integrating, and fielding FPGA-based solutions for high-performance embedded systems in Cyber and Electronic Warfare applications. The ideal candidate will have experience in digital logic design, FPGA programming, system integration, and military technology development and must hold an active Secret clearance. Key Responsibilities: Design, develop, and implement FPGA-based solutions for advanced Cyber/EW applications. Conduct research and development, prototyping, and system integration to support mission-critical defense projects. Develop and optimize digital logic designs using VHDL, Verilog, or SystemVerilog (C is a bonus). Work closely with hardware engineers, embedded software developers, and RF engineers to integrate FPGA designs into embedded systems. Perform simulation, synthesis, timing analysis, and verification of FPGA designs. Develop testbenches and validate designs using industry-standard simulation tools. Optimize FPGA resource utilization and power consumption for performance efficiency. Ensure seamless integration and fielding of FPGA-based military technology and systems. Knowledge of RF communications and signal processing is a plus. Work Environment: Active Secret clearance required. Hybrid flexibility depending on client approval (Primary work location: Aberdeen Proving Ground). Work on mission-critical defense technology supporting Cyber/EW programs. Qualifications: 3-10 years of experience in FPGA design and development. Have a thorough understanding and at least 1-3 years of demonstrated experience in: Engineering Research & Development (R&D), Prototyping, Integration, Testing, and Fielding of military technology and systems in Cyber/EW programs. Proficiency in VHDL, Verilog, or SystemVerilog. Experience with FPGA development tools (e.g., Xilinx Vivado, Intel Quartus, ModelSim). Strong debugging and troubleshooting skills for hardware integration. Ability to work collaboratively in a fast-paced, high-security environment. U.S. Citizenship required due to clearance requirements. This is an exciting opportunity to work on classified, high-impact defense projects at the forefront of Cyber and Electronic Warfare technologies. If you're interested, please reach out to discuss further details!

Windsor Mill, MD (Hybrid 3-days in the office) 12-month Contract to Hire We are seeking a motivated and detail-oriented Associate Civil Engineer to join our dynamic team. The successful candidate will assist in the planning, design, and implementation of civil engineering projects related to energy and utilities infrastructure and sustainable solutions. This role offers an excellent opportunity for professional growth and development within a supportive and collaborative environment. Key Responsibilities: Assist in the design and analysis of civil engineering projects, including pipelines, substations, and renewable energy facilities. Conduct site inspections and surveys to gather data and assess project feasibility. Prepare detailed engineering drawings, specifications, and reports. Collaborate with multidisciplinary teams to ensure project objectives are met. Support project management activities, including scheduling, budgeting, and resource allocation. Ensure compliance with industry standards, regulations, and safety protocols. Participate in the review and approval of contractor work and project deliverables. Provide technical support during construction and maintenance activities. Qualifications: Bachelor's degree in Civil Engineering or a related field. 0-3 years of experience in civil engineering, preferably in the energy and utilities sector. Proficiency in engineering software such as AutoCAD, Civil 3D, and GIS. Strong analytical and problem-solving skills. Excellent communication and teamwork abilities. Knowledge of industry standards and regulations. What's in it for you? A welcoming team environment where you will be provided with an opportunity to work with a Fortune 100 company. Eight Eleven group offers Health, Dental, and Vision benefits, weekly pay, holiday paid time off, and sick leave. Eight Eleven Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, national origin, age, sex, citizenship, disability, genetic information, gender, sexual orientation, gender identity, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state, and local laws.

DPS Group is seeking a Project Manager to oversee the full project lifecycle for BioPharma manufacturing/lab facility projects relating to maintenance. This Project Manager position is on the Owner's side and is responsible for all aspects of facility maintenance projects: coordinating maintenance project activities across a cross-functional engineering team to ensure that project deliverables are achieved. Responsibilities • Project examples: Air handling units and pumps, independently execute and or manage all related engineering tasks including project budget and schedule. • Utilities and Equipment upgrades and qualification • Process Knowledge • Leads project evaluations by identifying/capturing gaps, dependencies, resources, risk and financial impacts Coordinates, procures and implements the installation of secondary media as a link between the building and the equipment and provides technical support for new equipment installation. • Supports contractor activities in engineering, installing, commissioning, documentation, and sign-off of new equipment & structure projects. • Conducts cost estimate (invest, budget), technical specification and request for quotes. • Maintains project cost targets and budget forecasts. Participates in cross-functional project teams supporting activities related to the construction of the battery plant. • Provides sustainable, innovative and operationally optimal building concepts. • Review and consolidation of building requirements. • Implementation and development of building standards. • Other duties as assigned Skills and Qualifications • 5+ years' experience as a Project Manager in an engineering role in the pharmaceutical/biopharmaceutical manufacturing/lab industry. • Bachelor of Science degree in an engineering, preferably mechanical. • Managed capital project $50K to $1M + • Previous experience working on BioPharma facility maintenance projects. • Any additional project engineering experience in a cGMP/GxP manufacturing environment is a plus. • Knowledge of applicable Pharma/BioPharma GMP regulatory requirements. • Proven experience using effective project management practices. • Able to lead and engage in a multi-disciplined project team. • Strong communication skills (written and oral) across all levels of the organization. • Troubleshooting and analytical skills. • Ability to organize and prioritize several competing priorities. Additional To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Continuous Learning -Assesses own strengths and weaknesses. Pursues training and development opportunities. Seeks feedback to improve performance. Shares expertise with others. Strives to continuously build knowledge and skills. • Culture - Supports a culture of excellence. Contributes to a collaborative environment that rewards teamwork, mentorship, best-in-practice development, and pride in workmanship. • Customer Services - Displays courtesy and sensitivity. Manages difficult or emotional customer situations. Meets commitments. Responds promptly to customer needs. Solicits customer feedback to improve service. • Planning and Organizing - Prioritizes and Plans work activities. Uses time efficiently. Plans for additional resources. Integrates changes smoothly, Sets goals and objectives. Works in an organized manner. • Teamwork - Balances team and individual responsibilities. Contributes to building a positive team spirit. Exhibits objectivity and openness to others' views. Gives and welcomes feedback. Puts success of team above own interests. • Use of Technology - Demonstrates required skills. Adapts to new technologies. Keeps technical skills up to date. Troubleshoots technological problems. Uses technology to increase productivity. • Language Ability - Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Speak effectively before groups of customers or employees. • Mathematical Ability - Work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Apply concepts such as fractions, percentages, ratios and proportions to practical situations. • Reasoning Ability - Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Deal with problems involving several concrete variables in standardized situations. The Company DPS Group is a global EPCMV firm offering full-service solutions within the Life Sciences (pharmaceutical, biotechnology, and medical technology) and Advanced Technology (semiconductor, data center, and solar) industries. DPS is dedicated to delivering successful projects with a ‘client-first' mentality and personal touch across a range of market sectors: Project and Program Management, Procurement, Design, Construction Management, Health and Safety Management, Commissioning, Qualification, and Start-up. DPS Engineering Inc. is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. DPS does not discriminate in employment opportunities or practices on the basis of: race, color, religion, gender, national origin, age, sexual orientation, gender identity, disability, veteran status or any other characteristic protected by country, regional or local law. #LI-SG1

Pinemar, Inc. is a company of builders and crafts-people working together to build extraordinary and beautiful homes. With a deeply collaborative approach to working with all project stakeholders, Pinemar is focused on building architecturally unique, one of a kind custom homes, complex and large-scale renovations, and providing on going home and estate maintenance services. We have a positive, supportive culture built on excellence in project delivery and client care, lifelong learning, and the pursuit of becoming our best selves. Based in Ardmore, PA, we work in Philadelphia and the surrounding counties, and Delaware. POSITION: Project Manager MISSION: The Project Manager is part of a 3-person project delivery team along with the Superintendent and Project Executive charged with successfully completing projects. The Project Manager is responsible for coordinating the efforts of the Project Team, including the Design team (architect & Designer), Pinemar, and Trade Partners. The Project Manager's role on the team and in the company is to delight our clients and design partners by delivering the highest quality completed project, executed efficiently, on schedule and on budget, combined with creative problem-solving skills, exceptional organizational skills, and a patient, service oriented, “customer first” attitude. The Project Manager is responsible for ensuring the project meets its schedule and financial goals through effective management of the budget, scope, (and changes to these) and trade partner contracts. THE SUCCESSFUL PROJECT MANAGER WILL: 1. Act as Project Lead a. Be responsible and accountable for leading successful execution of Pinemar projects, with a focus on communication, client management, project team coordination and information management throughout the life cycle of the project. b. Main point of contact for Pinemar Project Team with architect/ designer and client, and primary responsibility for managing client and design team relationships and expectations. c. Responsible for achieving budget and schedule targets for each project they lead d. Maintain timely and effective communication with clients, design team, Pinemar team, trade partners, material suppliers, and consultants. e. Lead weekly/ bi-weekly job meetings. 2.Oversee and coordinate information flow between Owner, Design Team, subcontractors, material suppliers, consultants, and Pinemar Team, including Ordering materials, including identification and ordering of long lead time items Review and approve Shop Drawings for doors, windows, cabinets, hardware, tile, ornamental iron, and other building materials as needed Manage and track Submittals Manage scoping and budgeting of change orders Review/ approve subcontractor invoices Assist superintendent in developing and managing the Construction Schedule 3. Lead the Pre-Construction engagement for new projects, including preparation of budgets and schedules, including: a. The development of Conceptual Budget Range Estimates, and Construction Budgets for each project she leads b. Development of value engineering with cost analysis and recommendations 4.Have a proactive, flexible, and responsive approach to partially developed plans and designs, insufficient documentation and information, slow decision making 5. Assist superintendent in developing and managing the Construction Schedule 6. Be optimistic in the face of challenges, setbacks, constant scope changes, and slow decision making 7. Look for opportunities to creatively make the project better in ways large and small 8. Organize and lead Completion of Homeowner's Operation and Maintenance Manual POSITION REQUIREMENTS: Undergraduate or Graduate Degree in Architecture Construction Management, or Engineering. 10+ years of custom residential project management or commercial project management Deep understanding and expertise in the methods, materials, and processes specific to high end residential construction, and construction sequencing for complex residential renovations and new builds Incredibly strong organizational skills, ability to juggle multiple competing priorities, and manage time effectively Follow-through and finish strong Excellent written and verbal communication skills Microsoft office 365 Procore experience is a plus Possess a natural curiosity and ability to learn Neat Appearance Reliable vehicle Forty-hour work week Driver's license and good driving record Drug free CAPABILITIES: Growth Mindset A positive “can-do” attitude Impressive critical thinking and creative problem-solving skills A strong work ethic Flexibility Emotional and mental toughness Ability to collaborate and build strong relationships inside and outside the organization The ability to work independently, without close supervision Detail oriented Discretion and ability to keep client and company information confidential

Position: Electrical Engineer Location: Wilmington, Delaware Work Type: Freelance (On-site Support) Job Summary: We are seeking an experienced Electrical Engineer to oversee the survey, design, and installation of dedicated electrical circuits for a commercial facility in Delaware, USA. The engineer will be responsible for conducting an initial site survey, planning the installation, and executing the work according to electrical standards and safety regulations. This role requires hands-on expertise in electrical wiring, circuit installations, and working with electrical panels. Key Responsibilities: - Conduct an onsite survey to assess the existing electrical infrastructure and determine installation requirements. - Develop a detailed installation plan based on the survey, including circuit routing, panel connections, and load calculations. - Install (3) dedicated 120V, 20A circuits on the first floor and (3) dedicated 120V, 20A circuits on the second floor. - Install a total of six (6) dedicated quad receptacles and ensure proper connectivity to the electrical panel on the 1st floor. - Ensure all installations comply with National Electrical Code (NEC), OSHA, and local building regulations. - Perform circuit testing, load balancing, and troubleshooting to confirm proper operation. - Work collaboratively with project managers, facility teams, and any required technicians. - Provide a completion report including installation schematics, test results, and recommendations. Required Qualifications: - Bachelor's degree in Electrical Engineering or related field or equivalent work experience. - Licensed Electrician certification is preferred. - 3+ years of hands-on experience in electrical installation, wiring, and circuit planning. - Strong knowledge of 120V, and 20A circuit installations, electrical panels, and receptacle wiring. - Familiarity with electrical codes, safety regulations, and permit processes. - Ability to read and interpret electrical schematics and blueprints. - Strong troubleshooting and problem-solving skills. - Must have the ability to lift equipment, climb ladders, and work in commercial building environments.

Job Title: Generative AI Engineer Duration - Long Term Client - TCS/Vanguard Responsibilities: Design, develop, and optimize generative AI models using Python and AWS services, including Amazon Bedrock. Leverage Amazon Bedrock to access pre-trained models for tasks such as text generation, image creation, summarization, and other generative tasks. Build and maintain machine learning pipelines for model training, evaluation, and deployment. Collaborate with cross-functional teams including data scientists, engineers, and product managers to integrate AI solutions into production systems. Develop and optimize model performance for scalability and efficiency in cloud environments. Stay up to date with the latest advancements in AI and machine learning and apply them to current projects. Ensure model quality and robustness by implementing best practices for testing, monitoring, and updating models. Skills and Qualifications: Proficiency in Python. Experience with Amazon Web Services (AWS), particularly Amazon Bedrock. Strong understanding of AI and Generative AI products and tools. Experience in building and maintaining machine learning pipelines. Ability to work collaboratively with cross-functional teams. Knowledge of best practices for model testing, monitoring, and updating.

Title: Principal Applications Engineer Report: Applications Engineering Director Position Type: Full Time, Exempt Travel: Occasional , LLC Are you passionate about making a difference in the fight against climate change? Then AirJoule is the place for you! We are a joint venture between GE Vernova and AirJoule Technologies (formerly Montana Technologies), and a leader in the global sustainability transition. Our revolutionary atmosphere water harvesting technology enables transformative HVAC products that help our customers save money on their energy bills while reducing their environmental impact. The same core technology also enables atmospheric water harvesting products that create clean, abundant, and decentralized water for industrial, commercial, and humanitarian purposes. If you are a highly motivated and experienced individual who wants to make a real-world impact, we encourage you to apply! Position Summary AirJoule is seeking a Principal Applications Engineer to join the application engineering team, which focuses on optimization of device performance and understanding its performance landscape. AirJoule technology dehumidifies air with record-breaking energy efficiency, and then converts it into pure water. The role of the Principal Applications Engineer is essential for the success of the technology, because it connects basic R&D to real-world performance. This role will be involved with modeling of AirJoule systems and subcomponents, with respect to mass balance, process properties, and thermal management. The Principal Applications Engineer is expected to guide experimentation to validate the models and will run in tandem with the product development team in order to optimize AirJoule technology. This assignment will be located at AirJoule's headquarters in Newark, DE. The Principal Applications Engineer should be familiar with complex chemical or mechanical systems, process control and automation, and developing software-based models of chemical and mechanical systems. Key Responsibilities To perform in this position successfully, an individual must be able to perform each key responsibility satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Other duties may be assigned to meet business needs. Coordinate efforts between the Applications Engineering and Product Development teams, aimed at optimization of AirJoule adsorption systems. This will include optimization of geometry, sizing, flowpath, adsorption kinetics as it pertains to AirJoule adsorbent-coated heat exchangers. Develop models/simulations for AirJoule systems, interactions with environments, and AirJoule adsorption subcomponents. Software such as ASPEN, Matlab, COMSOL, DWSIM, Solidworks, etc. may be utilized. Lead efforts to design and implement supporting infrastructure for AirJoule prototypes, such as power sources, heat exchangers, communications systems, and transportation containers. Act as a mentor to junior employees and help provide development opportunities and support. Work with the Applications Engineering Team to design testing campaigns with Design-of-Experiment methods, execute them with sufficient experimental rigor, compile and communicate results. Document experimental results in the form of PowerPoint presentations, technical report documents, standard operating procedures (SOPs), and electronic laboratory notebook (ELN) entries. Train new employees in the responsibilities listed herein and similar work. Uphold a safe, respectful, collaborative, inclusive, and appreciative team environment. Education and Experience Requirements Minimum Education: Bachelor's degree (8+ years of experience), or 6+ years and a Master's degree, or a 2+ and a PhD… in chemical engineering or chemistry. Related degrees with significant direct experience in chemical engineering / chemistry will be considered. Experience with simulation is preferred, especially modeling of chemical processes and thermodynamics, computation fluid dynamics, or modeling of reactors/packed beds/membrane filters/etc.. (ASPEN, DWSIM, COMSOL, Matlab, etc…) Knowledge, Skills and Abilities Experience with running multicomponent mechanical and/or chemical systems, such as ‘rigs', reactors, automotives, technical prototypes, etc. including knowledge of safe operating methods. Experience with modeling of chemical and mechanical processes with software such as ASPEN, Matlab, COMSOL, DWSIM, etc. Experience with computation fluid dynamics is nice to have. Understanding of adsorption processes and mass transport. Fields with similar concepts such as ion exchange, heterogeneous catalysis, etc. are acceptable. Basic understanding of mechanical systems, especially heat exchangers, pumps, fans, motors and condensers. Passionate about hands-on work while acting as a driver with respect to project execution. Ability to work under pressure and flexibility towards pivoting. Strong interpersonal skills and desire to work as part of a team. AirJoule's Benefits In addition to good working conditions and competitive pay, it is AirJoule's policy to provide a comprehensive benefits package that provides access to plans which support the overall well-being of our employees and their dependents. These benefits include, but are not limited to, health care coverage (medical, dental, vision, pharmacy), a retirement plan that includes a 401K, Life Insurance options, Disability coverage, paid time-off, and more. How to Apply Qualified applicants should submit their resume with a cover letter outlining their qualifications to Human Resources via email at **************. AirJoule, LLC does not discriminate on the basis of actual or perceived race, religion, color, national origin, ancestry, disability, medical condition, marital status, sex, age, sexual orientation, gender identity or expression, family responsibility, personal appearance, genetic information, matriculation, political affiliation, or any other status protected under law.

(AED) AED is a full-service engineering and design firm in South Jersey taking on some of the most challenging projects in the Northeast. Our projects range from heavy industrial to advanced renewables requiring complex engineering and design solutions. We are a subsidiary of ARG (Allied Resources Group), and part of a family of technical service companies that provide services to critical infrastructure. About the Position The Senior Electrical Engineer will perform all phases of electrical related projects from conception through start-up and delivery, including electrical system model development and evaluation, specification of electrical distribution equipment, development of construction package drawings, serve as a point of contact with client personnel and support startup and commission efforts. The ideal candidate should be familiar with development of control systems and be able to support inhouse I&C engineering efforts. Technical Knowledge Develop complete electrical drawing packages as part of construction packages Develop electrical drawings and documents that include one-line drawings, power plans, hazard classification maps, cable routing (cable tray/raceways), cable & conduit schedules, grounding and lighting plans (including photometric studies) Specify and select electrical distribution equipment (Switchgear, MCCs, VFDs, UPSs, etc.) Develops technical, scope, and cost aspects of proposals Provide General Electrical Engineering Perform SKM calculations Direct quality checking for all deliverables Advanced/specialized training and experience relating to the discipline of interest Ability to prioritize tasks by frequency and importance Ability to work in physically demanding environments Attention to detail with excellent written and verbal communication skills Qualification Minimum Bachelor of Science degree in Engineering Professional Engineer License required. May consider EIT who can obtain in one year (5) to (20) years demonstrated Electrical Engineering experience in a multi-discipline environment in the energy, chemical and/or oil and gas industries Demonstrated experience as a Lead Electrical Engineer, supervising other Electrical Engineers, and mentoring younger Electrical Engineers Required knowledge of the National Electrical Code (NEC) and industry design standards Familiarity with electrical related software such as SKM or ETAP Increasing ability to perform electrical system related calculations such as short circuit analysis, arc flash evaluation and development of arc flash remediation strategies Increasing knowledge of unique or specific problem-solving approaches Increasing ability to apply knowledge in broad areas of assignments, especially projects concerned with unique or specialized problems Low to high voltage familiarity (480VAC to 25Kv) Non-Technical Skills Ability to plan, develop and coordinate a large project or several small projects Supervise work of others, both engineers and designers Functions as Project Engineer and Project Leader on single discipline projects Interfaces directly with the client's representative as necessary Field survey work required in heavy industrial environments Certifies designs and drawings as appropriate Maintains project schedules, develops designs, and reviews drawings, specifications and calculations Requires little to no supervision Can assist in the development of the technical scope of work specifications Travel up to 10% of the time - Local day trips/client visits (Pennsylvania, New Jersey, Delaware, Maryland) Excellent Benefits: Comprehensive Health Insurance Dental and Vision Insurance Company-Paid Life Insurance Supplemental Life Insurance 401(k) Retirement Plan with Employer Match Paid Time Off Parental Leave About Allied Resources Group (ARG) ARG is the parent organization to five niche technical service companies in Pennsylvania, New Jersey, Indiana, and Ohio. Our subsidiaries provide engineering, technical recruiting, healthcare, industrial inspection, and construction management support services to clients throughout the U.S. Mission - ARG was founded on a commitment to make the lives of people better by promoting services that are essential to a well-functioning society. At the heart of our mission is to hire the best and brightest in their field and provide opportunities for advancement and a best-in-class experience for employees. Vision - To improve the lives of employees, customers, and communities by becoming an industry leader in the critical infrastructure sectors we are engaged in. Values - We believe that by nurturing an entrepreneurial environment for each of our companies in critical infrastructure sectors to thrive, we can achieve positive outcomes that improve the lives of our employees, clients, and communities.

Insight Global is looking for a Project Manager for a restoration client in Wilmington, DE. This role involves working closely with the Project Director to manage and execute projects, conduct water moisture mapping, and maintain strong communication with clients and internal peers. The position primarily focuses on commercial projects. The headquarters is located in Wilmington, Delaware, with 75% of work within a 60-minute radius and 25% within a 4-hour radius. There is also an opportunity to support our National Restoration team. REQUIRED SKILLS AND EXPERIENCE 1 year of experience in water damage restoration. Valid driver's license. Strong work ethic. Respect for everyone. Team player mentality. NICE TO HAVE SKILLS AND EXPERIENCE 1 year of experience in emergency work. Bilingual in Spanish Benefits and Compensation $35-43/hour Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.