Production Operator Jobs in Columbus, GA

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Production Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. Follow standard work procedures to operate and maintain assigned machine(s). Routinely meet or exceed production output rates per standards. Ensure product meets certain tolerances and specifications. Perform routine inspections per quality standards. Understand production instructions. Maintain accurate paperwork. Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. Reads and follows work orders and formulas to meet production specifications and schedules. Examines materials, ingredients, or product per quality standards. Weighs or measures materials, ingredients, and products per requirements. Adds and mixes raw materials according to specifications. Transfers materials, supplies, and products between work areas. Discharges blenders of powder when necessary. Ensures quality and conformity of blended products to meet standards. Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. Completes cleaning logs and notifies quality control for hygiene testing. Records operational and production data on specified forms/production documents. Reports malfunctions to a supervisor and confirms proactive and routine maintenance. Conducts on-going assessment of quality control and operational procedures. EDUCATION REQUIREMENT: No formal education required. EXPERIENCE REQUIREMENT: No experience required. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to function effectively in a team setting. Ability to multi-task while maintaining attention to detail. Demonstrates reliability, flexibility, and dependability. Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs. BENEFITS: The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Production Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. Follow standard work procedures to operate and maintain assigned machine(s). Routinely meet or exceed production output rates per standards. Ensure product meets certain tolerances and specifications. Perform routine inspections per quality standards. Understand production instructions. Maintain accurate paperwork. Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. Reads and follows work orders and formulas to meet production specifications and schedules. Examines materials, ingredients, or product per quality standards. Weighs or measures materials, ingredients, and products per requirements. Adds and mixes raw materials according to specifications. Transfers materials, supplies, and products between work areas. Discharges blenders of powder when necessary. Ensures quality and conformity of blended products to meet standards. Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. Completes cleaning logs and notifies quality control for hygiene testing. Records operational and production data on specified forms/production documents. Reports malfunctions to a supervisor and confirms proactive and routine maintenance. Conducts on-going assessment of quality control and operational procedures. EDUCATION REQUIREMENT: No formal education required. EXPERIENCE REQUIREMENT: No experience required. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to function effectively in a team setting. Ability to multi-task while maintaining attention to detail. Demonstrates reliability, flexibility, and dependability. Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs. BENEFITS: The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Production Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. * Follow standard work procedures to operate and maintain assigned machine(s). * Routinely meet or exceed production output rates per standards. * Ensure product meets certain tolerances and specifications. * Perform routine inspections per quality standards. * Understand production instructions. * Maintain accurate paperwork. * Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. * Reads and follows work orders and formulas to meet production specifications and schedules. * Examines materials, ingredients, or product per quality standards. * Weighs or measures materials, ingredients, and products per requirements. * Adds and mixes raw materials according to specifications. * Transfers materials, supplies, and products between work areas. * Discharges blenders of powder when necessary. * Ensures quality and conformity of blended products to meet standards. * Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. * Completes cleaning logs and notifies quality control for hygiene testing. * Records operational and production data on specified forms/production documents. * Reports malfunctions to a supervisor and confirms proactive and routine maintenance. * Conducts on-going assessment of quality control and operational procedures. EDUCATION REQUIREMENT: * No formal education required. EXPERIENCE REQUIREMENT: * No experience required. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: * Ability to function effectively in a team setting. * Ability to multi-task while maintaining attention to detail. * Demonstrates reliability, flexibility, and dependability. * Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. * Demonstrates accepted ethical and professional business behavior. * Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. * Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly. PHYSICAL DEMANDS: * Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs. BENEFITS: * The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Why Aludyne? Aludyne is recognized as the #1 aluminum knuckle manufacturer in the world. We have over 30 strategically located facilities across the globe, with leading market shares in several key regions. With this infrastructure, we are able to serve our global customers as well as meet the needs of local demands of speed, flexibility and efficiency. At Aludyne, we aim to recruit and retain smart, inquisitive people fueled by the same entrepreneurial spirit that drives us. It's how we deliver on the promises we make to customers, and to each other. We believe in continuous improvement for our workforce and providing them with the tools necessary to further their career while also giving them the autonomy to make a defined difference. Benefits We Offer: Comprehensive Benefits Package to include medical, dental and vision insurance, Health Savings Account with annual employer contributions, Flexible Spending Accounts, Tuition Reimbursement, Employer 401K Match, Employee Assistance Program, paid vacation and holidays. Visit us to learn more about life at Aludyne! We are hiring Production Operators to join our team! Openings are in our finishing, molding or melting department(s). Operators in these departments run various machines &/or equipment to produce ductile iron castings. These position ensure continuous operation of the related production area to safely meet production and quality requirements. Insure all procedures are being followed as written. Assist in the training of new machine operators and complete required reports to help monitor continuous improvement. Primary Duties and Responsibilities Include: Operate machines or equipment to produce iron castings (70%) Performs production quality checks (15%) Maintains a clean work environment (10%) Completes documentation requirements (5%) May be required to have or obtain training in particular materials, products, equipment or quality methods Maintains a clean working environment, housekeeping, & follows 5-S cleaning and organizing Other duties as assigned Requirements High school diploma or equivalent required Experience in a manufacturing environment preferred but not required Employees are expected to work and attend in person meetings as necessary Aludyne is an equal employment opportunity employer such that all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, or other legally protected status. Aludyne does not seek or accept unsolicited resumes or offers of recruiting service associated with any published or unpublished employment opportunities. Any unsolicited information sent to any member within Aludyne will be considered as unencumbered and free from any fee or charge whatsoever. Only members of our Talent Acquisition Team have authority to engage or authorize recruiting services.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Production Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Production Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. The Production Operator will operate production equipment, including industrial blenders, in accordance with the established production schedule. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. Follow standard work procedures to operate and maintain assigned machine(s). Routinely meet or exceed production output rates per standards. Ensure product meets certain tolerances and specifications. Perform routine inspections per quality standards. Understand production instructions. Maintain accurate paperwork. Inspects equipment, structures, and materials to identify problems or defects prior to production to ensure a clean, clear and safe work environment. Reads and follows work orders and formulas to meet production specifications and schedules. Examines materials, ingredients, or product per quality standards. Weighs or measures materials, ingredients, and products per requirements. Adds and mixes raw materials according to specifications. Transfers materials, supplies, and products between work areas. Discharges blenders of powder when necessary. Ensures quality and conformity of blended products to meet standards. Ensures equipment is set-up, cleaned, sanitized, and operating properly before, after and between runs. Completes cleaning logs and notifies quality control for hygiene testing. Records operational and production data on specified forms/production documents. Reports malfunctions to a supervisor and confirms proactive and routine maintenance. Conducts on-going assessment of quality control and operational procedures. EDUCATION REQUIREMENT: No formal education required. EXPERIENCE REQUIREMENT: No experience required. OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to function effectively in a team setting. Ability to multi-task while maintaining attention to detail. Demonstrates reliability, flexibility, and dependability. Models the values and expectations of 168 - integrity, responsible entrepreneurship, commitment and moral courage. Demonstrates accepted ethical and professional business behavior. Executes ISO authority and responsibility. Completes and maintains all required training. Reports suspected violations including those of a business associate. Observes all safety procedures, reports potentially unsafe conditions and uses and maintains equipment and materials properly. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 75 lbs. BENEFITS: The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Start your new career as a Machine Operator with MAU at Milliken in Pine Mountain, GA. As a Machine Operator, you will operate the loom in line with training to ensure correct procedures are adhered to such as, quality requirements. What We Offer * $15.60 per hour * Health benefits, including telehealth medical services * Paid holidays * Paid vacation * Temp-to-hire position What We're Looking For * High school diploma or GED * Previous weaving experience * Must have warehouse knowledge * Ability to work 12 hour rotating shift, including some weekends * Ability to follow company policies and procedures * Ability to lift up to 25 pounds throughout shift * Ability to push, pull, and bend * Ability to stand for the entirety of the shift What You'll Do as a Machine Operator * Identify the correct yarn and ensure AF, MR and Lot numbers used in the fabric are entered clearly and accurately * Operate the loom in line with training to ensure correct procedures are adhered to such as, quality requirements, roll doffing, general weaving, fabrics, operate looms as required by the Shift Lead/Technician * Adopt a "clean as you go" attitude, use correct cleaning methods, such as cloths, cleaning agents etc. as instructed * Inform the supervisor if you have any doubts about the quality of the fabric you are producing * Inform the supervisor if there are any breakdowns on the loom * Repair filling and warp stops, creel or tie-in fillings and inspecting fillings when case is allocated to the machine * Replace Catch Selvage Spool and Leno Spools * Identify S & Z problems in Belting Styles * Undertake any other activities that the Company may reasonably request * Procedure for Straps and Springs on Catch Selvage Bobbins * Perform other tasks as assigned

**Country:** United States of America ** Onsite Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? Shift days/hours: B shift Mon - Thurs 4p-2:30am **What You Will Do:** + Set up and operate equipment, lend expertise to resolving process problems, perform the less complicated work on tools and dies, perform periodic preventive maintenance checks and less complicated repairs. Requires the know how to deburr parts, clean parts, read process sheets, use and read gauges, make minor machine moves, as well as being familiar with the characteristics of the product + This position requires a mechanical and technical aptitude and an ability to follow work instructions. Comply with all environmental, health, and safety requirement. + You will set up and operate process equipment in an assigned area. + You will set up and operate basic machine tools to repair, make minor alterations and make the less complicated tooling. + You will need to read and understand blueprints and work from written and verbal instructions. + You will perform basic shop mathematics and use basic measurement instruments. + We service and repair equipment associated with the area where problems are identified. + You will assist in the development of other team members. + We perform administrative tasks such as complete MRP and status of work in process, conduct safety meetings, order tools and supplies, etc. + We perform unrelated duties as may be necessary to support the needs of the facility. **Qualifications You Must Have:** + High School Diploma or equivalent + 1+ year of manufacturing/mechanic experie + U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Qualifications We Prefer:** + CNC Machine operating experience + 2yr technical certificate + Proficient in MS Office Suite **What We Offer:** + Medical, dental, vision and life insurance + Short-term disability, long-term disability and parental leave + 401(k) match + Flexible spending accounts + Employee assistance program + Employee Scholar Program (No waiting period!) + Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays throughout the year inclusive of holiday shutdown for the week between Christmas and New Year. **Additional Information:** + Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship. **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. The salary range for this role is - . The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.

Full-time Description *Machine Operator The Machine Operator will ensure machinery is set up, works properly, and conforms with (and can produce materials that conform with) company quality, quantity, and efficiency standards. DSC was established in 1979 and has grown into a specialist in seat frames. With the acquisition of TS16949 / ISO14001 certification, DSC has been recognized for its quality and technology in automobile seats. Based on accumulated technology and customer trust, DSC is pursuing 'a futuristic first-class company that respects humanity'. We are committed to global marketing and green management to contribute to our customers and human society. Under the belief that the workplace should be a place to realize individual development and dreams as a corporate citizen, we are constantly striving to create an in-house atmosphere where all employees can enjoy self-development in a pleasant and energetic environment. Responsibilities: Set up and operate machine according to daily production goals Determining whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. Identify and remove weld splatter from equipment on a daily basis to maintain optimal production results Gig installation on the machines Completing production checklist daily Conducting machine inspections daily Maintaining a clean work environment Reading blueprints & manuals Staying up to date on production goals Reporting equipment issues to the production lead Daily use of hand tools (allen wrench, hand drills, chisels, hammers, snips, socket wrench..etc) Following the safety protocols Requirements Hand-Eye Coordination Must be 18 years old or older Must have at least 6 months of manufacturing experience Must be a US Citizen or Authorized to work in the US Disclosure: This is a temp-to-perm position. All production employees for this role must be employed through Grace (staffing agency) for a minimum of 90 days. DSC company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Lingo Staffing is looking for machine operators in the Thomaston, GA area. This position will require lifting of 50lbs consistently- standing on feet for 8-10 hours and able to bend, stoop, and twist. This position requires you to lift product and dump into the batcher machines and any other warehouse duties given to you. Mon-Fri weekends when needed- openings on 1st and 2nd shift weekly pay $16.00 an hour

Job Type: Full-time Responsibilities include the following (other duties may be assigned as needed): Maintain adherence to all safety guidelines. Ensure customer satisfaction through the active promotion of HL Mando Quality Policy. Strictly follow current Procedures, Work Instructions, Quality Alerts, One Point Lessons, authorized forms and other applicable documentation. Meet or exceed all quality standards. Actively participate in 5S and housekeeping activities to achieve and maintain expectations. Maintain equipment through proper Preventative Maintenance measures as applicable. Complete assigned work in a timely, efficient, and effective manner. Prepare all required documentation accurately and on time. Maintain sufficient training on multiple operations to enhance the flexibility of the Production Department. Promote continual improvement and cost saving opportunities. Maintain prompt and effective communication to assure HL Mando success. Work under minimal supervision. Work within the guidelines and expectations of HL Mando Policies and Procedures. Perform other duties/responsibilities as assigned. Able to lift a minimum of 35 pounds on a somewhat repetitive basis. Able to bend, stoop, and reach on a somewhat repetitive basis. Able to use and operate tools and equipment consistent with the assigned job. Able to produce and inspect parts with conform to product and quality specifications. Able to work overtime during the week and on weekends as needed; at times this will be necessary on short notice as business conditions change. Continuously demonstrate a positive attitude, teamwork, and cooperative behavior with colleagues and supervisors Salary: 2nd shift: $14.45/hr + $0.75 shift differential 3rd shift: $14.45/hr + $1.00 shift differential Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Life insurance Paid time off Vision insurance Schedule: Evening shift Night shift Overtime Weekend availability Work Location: One location HL Mando is committed to maintaining a safe and compliant work environment. As such, we do not hire individuals under the age of 18. All applicants must meet the minimum age requirement for the position as outlined by federal, state and local labor laws

We are seeking a skilled CNC Brake Press Operator to join our manufacturing team. The ideal candidate will have experience operating CNC brake presses and will be responsible for setting up, operating, and maintaining the equipment to produce high-quality parts according to specifications.

SummaryAs an Auburn Manufacturing Associate, you will be assigned to work within teams as a machine operator. As a machine operator you will set-up and operate a variety of machines performing a wide variety of machining operations on aircraft engine turbine blades and other materials, parts and assemblies.Job Description Minimum Requirements: High school diploma or GED. At least 1 year's work experience in a manufacturing environment or equivalent. Equivalent experience includes relevant hands-on work experience such as industrial, warehouse, construction, military, maintenance, heavy equipment operation, machining, and/or assembly. Ability to (A) read and interpret blueprints, (B) use precision measuring equipment such as micrometers, vernier, calipers, and (C) perform shop math calculations including fraction and decimal equivalents. Willingness to wear personal protective equipment including safety glasses, gloves, hats, ear plugs and safety shoes. Ability to utilize a computer and/or other technological equipment as required. Must be available to work 2nd shift from 3:15pm to 11:45pm 5 nights per week or 3rd shift from 11:30pm to 7:30am 5 nights per week. Must be able to train on a different shift then what is assigned. Essential Responsibilities: Every Manufacturing Associates is part of a work team and is required to actively participate in teams and committees. Learn to operate all workstations, perform complex layout operations to verify part dimensions, and perform assembly and disassembly of parts as required. Individuals will apply knowledge and skill to work within their teams and constantly strive to improve operation and cycle time. This includes the completion of Kaizen and Lean projects. Operate tools and equipment ranging in size from small to large and in complexity from simple to very complicated. Perform other related duties as necessary. Desired Characteristics: Associate degree or higher. Excellent attendance. Effective problem identification and solution skills. Strong interpersonal skills. Strong oral and written communication skills. Willingness to work at a tobacco free site. Must be able to work an off shift - 2nd shift from 3:15 PM to 11:45 PM The starting hourly rate for the Manufacturing Associate role in Auburn, Alabama is $20.42 per hour plus $1.50/hr. shift differential. GE Aerospace offers competitive benefits including health care starting on day one, 401(k) savings plan with employer match, paid time off, and tuition reimbursement. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com. Any offer of employment is conditioned upon the successful completion of a drug screen and background check. This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Machine Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. * Follow standard work procedures to operate and maintain assigned machine(s). * Routinely meet or exceed production output rates per standards. * Ensure product meets certain tolerances and specifications. * Perform routine inspections per quality standards. * Understand production instructions. * Maintain accurate paperwork. * Package, label, and store products. * Cross-train on other production functions as business need dictates. * Clean and maintain assigned area to ensure proper functionality. * Report and assist with resolving safety, quality, and mechanical issues. * Participate in the continuous improvement process. * If appropriate, set up and operate various off-line and secondary equipment. EDUCATION REQUIREMENT: No formal educational requirement EXPERIENCE REQUIREMENT: No prior experience or training required OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: * Ability to function effectively in a team setting. * Ability to multi-task while maintaining attention to detail. * Demonstrates reliability, flexibility, and dependability. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Tremco Construction Products Group brings together Tremco CPG Inc.'s Commercial Sealants & Waterproofing and Roofing & Building Maintenance divisions; Tremco Barrier Solutions Inc.; Dryvit, Nudura and Willseal brands; Prebuck LLC; Weatherproofing Technologies, Inc.; Weatherproofing Technologies Canada and PureAir Control Services, Inc. Altogether, Tremco CPG companies operate 21 manufacturing facilities, 6 distribution sites, and 3 R&D/technology sites, and employ more than 2,700 people across North America. GENERAL PURPOSE OF THE JOB: The Machine Operator starts, troubleshoots, and operates manufacturing equipment safely. There are three Machine Operator levels (I, II, & III). The level will be determined by experience, ability to assume various roles on the plant floor, and demonstrated ability to independently troubleshoot and problem-solve machine issues resulting in efficient cycles and minimal downtime. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform work in a safe manner by following all written and verbally communicated safety rules and procedures. Follow standard work procedures to operate and maintain assigned machine(s). Routinely meet or exceed production output rates per standards. Ensure product meets certain tolerances and specifications. Perform routine inspections per quality standards. Understand production instructions. Maintain accurate paperwork. Package, label, and store products. Cross-train on other production functions as business need dictates. Clean and maintain assigned area to ensure proper functionality. Report and assist with resolving safety, quality, and mechanical issues. Participate in the continuous improvement process. If appropriate, set up and operate various off-line and secondary equipment. EDUCATION REQUIREMENT: No formal educational requirement EXPERIENCE REQUIREMENT: No prior experience or training required OTHER SKILLS, ABILITIES, AND QUALIFICATIONS: Ability to function effectively in a team setting. Ability to multi-task while maintaining attention to detail. Demonstrates reliability, flexibility, and dependability. PHYSICAL DEMANDS: Incumbent must be able to stand, walk, sit, use hands, reach, climb, balance, kneel, talk, hear, taste, smell, and lift up to 50 lbs. BENEFITS AND COMPENSATION: The Company offers a variety of benefits to its employees, including but not limited to health insurance, paid holidays, paid time off, 401(k) Savings and Trust & Plan with company match, Company Pension Plan, Performance Based Bonus/Commission, and continuing education. All qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Full-time Description *Machine Operator The Machine Operator will ensure machinery is set up, works properly, and conforms with (and can produce materials that conform with) company quality, quantity, and efficiency standards. DSC was established in 1979 and has grown into a specialist in seat frames. With the acquisition of TS16949 / ISO14001 certification, DSC has been recognized for its quality and technology in automobile seats. Based on accumulated technology and customer trust, DSC is pursuing 'a futuristic first-class company that respects humanity'. We are committed to global marketing and green management to contribute to our customers and human society. Under the belief that the workplace should be a place to realize individual development and dreams as a corporate citizen, we are constantly striving to create an in-house atmosphere where all employees can enjoy self-development in a pleasant and energetic environment. Responsibilities: Set up and operate machine according to daily production goals Determining whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. Identify and remove weld splatter from equipment on a daily basis to maintain optimal production results Gig installation on the machines Completing production checklist daily Conducting machine inspections daily Maintaining a clean work environment Reading blueprints & manuals Staying up to date on production goals Reporting equipment issues to the production lead Daily use of hand tools (allen wrench, hand drills, chisels, hammers, snips, socket wrench..etc) Following the safety protocols Requirements Hand-Eye Coordination Must be 18 years old or older Must have at least 6 months of manufacturing experience Must be a US Citizen or Authorized to work in the US Disclosure: This is a temp-to-perm position. All production employees for this role must be employed through Grace (staffing agency) for a minimum of 90 days. DSC company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Job Purpose: The basic function of the Production Operator is to perform duties necessary to accomplish production in a safe, quality driven and efficient manner. Responsibilities include the following (other duties may be assigned as needed): Maintain adherence to all safety guidelines. Ensure customer satisfaction through the active promotion of MAC Quality Policy. Strictly follow current Procedures, Work Instructions, Quality Alerts, One Point Lessons, authorized forms and other applicable documentation. Meet or exceed all quality standards. Actively participate in 5S and housekeeping activities to achieve and maintain expectations. Maintain equipment through proper Preventative Maintenance measures as applicable. Complete assigned work in a timely, efficient, and effective manner. Prepare all required documentation accurately and on time. Maintain sufficient training on multiple operations to enhance the flexibility of the Production Department. Promote continual improvement and cost saving opportunities. Maintain prompt and effective communication to assure MAC success. Work under minimal supervision. Work within the guidelines and expectations of MAC Policies and Procedures. Perform other duties/responsibilities as assigned. Continuously demonstrate a positive attitude, teamwork, and cooperative behavior with colleagues and supervisors. Qualifications: High School graduate. Able to lift a minimum of 35 pounds on a somewhat repetitive basis. Able to bend, stoop, and reach on a somewhat repetitive basis. Able to use and operate tools and equipment consistent with the assigned job. Able to produce and inspect parts with conform to product and quality specifications. Able to work overtime during the week and on weekends as needed; at times this will be necessary on short notice as business conditions change. Technical Competencies: Able to read and interpret blueprints and work instructions. Good math skills. Non-Technical Competencies: Good communication skills (verbal, listening) Results-oriented and takes ownership

As an Auburn Manufacturing Associate, you will be assigned to work within teams as a machine operator. As a machine operator you will set-up and operate a variety of machines performing a wide variety of machining operations on aircraft engine turbine blades and other materials, parts and assemblies. **Job Description** **Minimum Requirements:** + High school diploma or GED. + At least 1 year's work experience in a manufacturing environment or equivalent. Equivalent experience includes relevant hands-on work experience such as industrial, warehouse, construction, military, maintenance, heavy equipment operation, machining, and/or assembly. + Ability to (A) read and interpret blueprints, (B) use precision measuring equipment such as micrometers, vernier, calipers, and (C) perform shop math calculations including fraction and decimal equivalents. + Willingness to wear personal protective equipment including safety glasses, gloves, hats, ear plugs and safety shoes. + Ability to utilize a computer and/or other technological equipment as required. + **Must be available to work 2nd shift from 3:15pm to 11:45pm 5 nights per week or** **3rd shift from 11:30pm to 7:30am 5 nights per week.** + Must be able to train on a different shift then what is assigned. **Essential Responsibilities:** + Every Manufacturing Associates is part of a work team and is required to actively participate in teams and committees. + Learn to operate all workstations, perform complex layout operations to verify part dimensions, and perform assembly and disassembly of parts as required. + Individuals will apply knowledge and skill to work within their teams and constantly strive to improve operation and cycle time. This includes the completion of Kaizen and Lean projects. + Operate tools and equipment ranging in size from small to large and in complexity from simple to very complicated. + Perform other related duties as necessary. **Desired Characteristics:** + Associate degree or higher. + Excellent attendance. + Effective problem identification and solution skills. + Strong interpersonal skills. + Strong oral and written communication skills. + Willingness to work at a tobacco free site. + Must be able to work an off shift - 2nd shift from 3:15 PM to 11:45 PM The starting hourly rate for the Manufacturing Associate role in Auburn, Alabama is $20.42 per hour plus $1.50/hr. shift differential. GE Aerospace offers competitive benefits including health care starting on day one, 401(k) savings plan with employer match, paid time off, and tuition reimbursement. If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at accommodation.mailbox@ge.com . Any offer of employment is conditioned upon the successful completion of a drug screen and background check. _This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

*Machine Operator The Machine Operator will ensure machinery is set up, works properly, and conforms with (and can produce materials that conform with) company quality, quantity, and efficiency standards. DSC was established in 1979 and has grown into a specialist in seat frames. With the acquisition of TS16949 / ISO14001 certification, DSC has been recognized for its quality and technology in automobile seats. Based on accumulated technology and customer trust, DSC is pursuing 'a futuristic first-class company that respects humanity'. We are committed to global marketing and green management to contribute to our customers and human society. Under the belief that the workplace should be a place to realize individual development and dreams as a corporate citizen, we are constantly striving to create an in-house atmosphere where all employees can enjoy self-development in a pleasant and energetic environment. Responsibilities: Set up and operate machine according to daily production goals Determining whether machinery is working properly based on specifications for expectations such as fixtures, cutting speeds, or feed rates. Identify and remove weld splatter from equipment on a daily basis to maintain optimal production results Gig installation on the machines Completing production checklist daily Conducting machine inspections daily Maintaining a clean work environment Reading blueprints & manuals Staying up to date on production goals Reporting equipment issues to the production lead Daily use of hand tools (allen wrench, hand drills, chisels, hammers, snips, socket wrench..etc) Following the safety protocols Requirements Hand-Eye Coordination Must be 18 years old or older Must have at least 6 months of manufacturing experience Must be a US Citizen or Authorized to work in the US Disclosure: This is a temp-to-perm position. All production employees for this role must be employed through Prolink (staffing agency) for a minimum of 90 days. DSC company is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

The basic function of the Production Operator is to perform duties necessary to accomplish production in a safe, quality driven and efficient manner. Responsibilities include the following (other duties may be assigned as needed): Maintain adherence to all safety guidelines. Ensure customer satisfaction through the active promotion of MAC Quality Policy. Strictly follow current Procedures, Work Instructions, Quality Alerts, One Point Lessons, authorized forms and other applicable documentation. Meet or exceed all quality standards. Actively participate in 5S and housekeeping activities to achieve and maintain expectations. Maintain equipment through proper Preventative Maintenance measures as applicable. Complete assigned work in a timely, efficient, and effective manner. Prepare all required documentation accurately and on time. Maintain sufficient training on multiple operations to enhance the flexibility of the Production Department. Promote continual improvement and cost saving opportunities. Maintain prompt and effective communication to assure MAC success. Work under minimal supervision. Work within the guidelines and expectations of MAC Policies and Procedures. Perform other duties/responsibilities as assigned. Continuously demonstrate a positive attitude, teamwork, and cooperative behavior with colleagues and supervisors. Qualifications: High School graduate. Able to lift a minimum of 35 pounds on a somewhat repetitive basis. Able to bend, stoop, and reach on a somewhat repetitive basis. Able to use and operate tools and equipment consistent with the assigned job. Able to produce and inspect parts with conform to product and quality specifications. Able to work overtime during the week and on weekends as needed; at times this will be necessary on short notice as business conditions change. Technical Competencies: Able to read and interpret blueprints and work instructions. Good math skills. Non-Technical Competencies: Good communication skills (verbal, listening) Results-oriented and takes ownership “HL Mando is committed to maintaining a safe and compliant work environment. As such, we do not hire individuals under the age of 18. All applicants must meet the minimum age requirement for the position as outlined by federal, state and local labor laws.”