Product Engineer Jobs in Bloomington, MN

In this role, you will be responsible for supporting existing products in water treatment markets sold in retail, commercial, and e-commerce channels. Specifically, these activities in this position include product enhancements and additions, cost improvements, identifying potential alternate sources, and investigation of quality concerns. In addition, the design and development of new products is an element of this role. Essential Functions: Perform recurring engineering activities on existing products as needed and work cross functionally to solve problems. Identify cost savings or multi-sourcing opportunities. Support development of these work plans, including work breakdown structures, cost estimates, and schedules. Drive implementation of approved plans. Assist the integration of new and revised products into manufacturing. Initiate and execute engineering change orders, including CAD model/drawing creation and modification. Monitor active engineering change orders and coordinate completion with inter-department resources. Respond to design related CAPAs (Corrective Actions and Preventive Actions) Assist in the development of new product designs and testing. Review FAIRs and approve tools Assist with quality surveillance audits. Communicate and report project status to supervisor Required Qualifications: Bachelor's degree or higher in Engineering or scientific discipline such as Chemical, Materials or Mechanical Engineering. 5+ years engineering experience related to Product Design. The ability to see and respond to dangerous situations The ability to lift 20 pounds The ability to climb in and out of spas The ability to work in a fast-paced, small team environment under minimal supervision to accomplish planned goals as well as address unplanned product issues. Ability to travel up to10% Embrace and foster company values of Integrity, Excellence, People Chemistry, Golden Rule, Courage and Servant-Leadership. Preferred Qualifications: Experience with engineering testing, tool qualification, and product validation. Knowledgeable in the design and methods used to produce injection molded, blow molded, printed, and machined components. Exhibit the application of independent engineering judgment, theories, and first principles to concept and product development. Pool, water processing, filtration, pumping, chemical dilution, or other fluid processing knowledge desirable. Experience managing product development and improvement projects in a cross-functional environment and meet time, quality, and cost goals. Experience providing customer support in a technical capacity. Exhibit the ability to interface with suppliers to identify and implement new processes, approve tools, review designs, and improve or address quality issues. Proficient in communication with technical and non-technical audiences via e-mail, presentations, application notes, FAQ's, test procedures, reports, and engineering specifications. Moderately proficient in the use of common hand and power tools necessary to build and modify prototypes and fixtures. Proficient with SolidWorks (preferred) or other 3D CAD software and MS Office suite.

**3 openings for Mechanical Engineer I or II** Seeking local candidates in Minnesota only Join a values-based, ESOP (employee-owned) company where YOU are a top priority! Reell Precision Manufacturing is a leading provider of innovative position and motion control solutions, delivering high-quality precision products that optimize performance and efficiency throughout a diverse global market. The company was named “Reell” (ray-El'); a German word meaning honest , trustworthy and good to reflect these foundational values. After 50+ years in business, we continue to strive to fulfill the promise of these words in our products, services and our relationships with customers, shareholders, co-workers, suppliers and the community. Are you a passionate and driven Mechanical Engineer looking to take your career to the next level? Join our dynamic team where innovation meets hands-on experience! We are seeking a Mechanical Engineer I or II to become an integral part of our workforce, collaborating with a diverse team of engineers dedicated to product and automation design and development. As a key member of our engineering team, you'll be working in an environment that fosters growth, learning, and professional development. We're looking for individuals who are eager to learn, build, and make a meaningful impact while contributing to continuous improvement across our projects. If you are professional, a team player, customer-focused, and methodical in your approach to problem-solving, we want you to help shape the future of engineering with us. Primary Responsibilities Project Deployment Process (PDP): Works with senior engineers to develop product design requirements for new products, contributes to the PDP process, provides deliverables and project gate review requirements, participates in design reviews, and estimates costs and resources. May guide other teams to complete tasks. Design Control: Manages design changes and configurations after product release, collaborates with customers, sales, and operations to implement changes, and handles deviations to design documents. Engineering Change Requests (ECRs): Prepares design documentation, approves prints and Bills of Materials, and processes ECRs as needed. Material Review Board (MRB): Participates in reviewing discrepant materials, provides design input, and contributes to process and documentation improvements. Product Testing: Creates test plans and reports to ensure product reliability for new introductions and helps design and implement tests to meet customer requirements. Engineering Work Orders (EWOs): Supports intercompany requests for engineering work orders from other departments. Corrective Action Preventative Action (CAPA): Works with Quality to investigate root causes, take corrective actions, and communicate with customers. Tooling Design: Designs and documents production tools and equipment as directed by senior engineers. Equipment Qualification: Assists in validating and qualifying equipment, ensuring tooling meets customer requirements for PPAP or equivalent. Customer and Supplier Contact: Communicates with customers and suppliers to resolve design-related questions and provides engineering data as needed. Research and Development: Supports the development of new technologies and solutions under the guidance of senior engineers. Minimum Qualifications Four-year Technical College Degree in engineering discipline (BSME, BSMS, BSEE) or equivalent Coursework in computer aided engineering, FEA, Materials, Manufacturing Processes and DOE. Reell Precision Manufacturing offers competitive compensation and benefits. For this exempt position, the pay range is expected to be between $70,000 - $90,000 annually. Please note that the pay range is a good faith estimate of the position at the time of posting. Actual compensation will be dependent on factors, including but not limited to, the individual's qualifications, experience, knowledge, skills and abilities, as well as the actual work location. Benefits include: Medical insurance options with employer contribution to Health Savings Account Flexible Spending Account options Dental, Vision, Life and Disability benefits 401(k) with employer match Employee Stock Ownership Plan (ESOP) with employer contribution toward employee retirement Discretionary bonus plan Paid Time Off (PTO) Community Involvement Opportunities Education Program Hybrid work opportunity, up to two days remote per week, for qualifying jobs Reell Precision Manufacturing provides equal employment opportunity (EEO) to all employees and applicants without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or any other status protected by applicable federal, state, and local laws.

TÜV SÜD America Hiring for Product Safety Engineer for New Brighton, MN Location Please find the job description below for your reference and if interested request you to send me your updated resume Title: Product Safety Engineer Duration: Full Time Employment Location: New Brighton, MN OVERALL RESPONSIBILITIES: Act as a Product Safety Engineer for TÜV SÜD America, inspect, test, and photograph products for conformity assessment using international and national regulations with deliverables to clients being Certificates, Test Reports, and/or Technical Reports as quoted. Providing engineering expertise and operational support for Product Safety Testing. Full time exempt position for TÜV SÜD America Inc., Product Service division. This position is an onsite position with opportunities for hybrid based on business needs. ESSENTIAL FUNCTIONS: - Knowledge of IEC and UL standards and international safety schemes such as OSHA's NRTL (Nationally Recognized Testing Laboratories) Program and the IECEE's CB Scheme preferred. - Individual will prepare technical reports based on project scope. The Engineer will develop a preliminary plan of test execution, and determine testing requirements by analyzing client input, available supplemental data, and product construction. - Communicate with internal and external customers in all circumstances including providing technical feedback answering questions, relaying messages and providing information regarding standards, test procedures, to bring product into compliance with requirements. - Set up and operate standard test equipment including, but not limited to, oscilloscope, multi-meter, dielectric strength tester, ground continuity tester, digital multi-meter, over-voltage tester, environmental condition chamber, and articulated probes. - Ensure that all test documentation is completed in an accurate and timely manner and is ready to be incorporated into a test report. - Maintain knowledge of proper operational procedures of all test equipment and assure proper calibration and functioning of all test equipment. - Participate in customer “kick-off” meetings to ensure the customer and lab are fully aware of the test plan and samples are properly configured for the testing in question - Keep up to date of the latest design theory, including detailed theoretical knowledge in relevant technical areas, stay up to date with current product standards, test procedures, instrumentation, and technology by participating in internal training sessions, attending external seminars, and reading technical articles - Actively work as part of the regional product safety team in preparation and hosting audits (internal/external). - Projects may include travel to conduct or witness tests at client sites. Qualification KNOWLEDGE, SKILLS, AND ABILITIES: - Demonstrated ability to work independently and in a team environment; - Demonstrated, excellent oral and written communication skills; - Comfortable dealing with customers at all levels - Has reliable judgment that is consistent, adaptable to unusual situations, and realistic - Ability to manage multiple projects at once - Additional experience in Medical IEC Standards such as IEC 60601-1 with associated Collaterals and Particulars. - Additional experience with process standards such as IEC 62304 relating to Software Lifecycle, IEC 14971 relating to Risk Management, and IEC 62366 relating to Human Factors/Usability - Additional experience in Information Technologies IEC Standards such as IEC 62368, IEC 60950, - Additional experience in Laboratory Measuring Equipment IEC Standards such as IEC 61010 and associated Particulars. - Additional experience in testing standards such as IEC 60529, IEC 60825, ISO 14708, ISO 10079 - Demonstrated ability of circuit analysis to determine critical components relying of basic safety - Strong communication skills and ability to interact and connect with customers. - Comfortable in laboratory environments performing hands-on engineering services governed by ISO 17025 procedures and policies. EDUCATION: - University Degree in Electrical Engineering, Biomedical Engineering, Engineering Technology, or related field, from an ABET accredited program preferred. EXPERIENCE: - Minimum two (2) years Product Regulatory experience - Previous experience using consumer product safety standards; Medical Standards being a plus.

MCE-Project Designer/Engineer Michaud Cooley Erickson (MCE) is a privately owned full-service engineering firm specializing in providing exceptional mechanical, electrical, lighting, fire safety, security, technological systems, commissioning, and energy management solutions for our clients nationwide. Our dedication to cutting edge building systems design is woven into the fabric of our operations. We cultivate a vibrant culture fueled by sustainable growth, innovative engineering solutions, and impactful experiences. At MCE, we understand that at the heart of every successful project are the people it impacts. We are dedicated to fostering enduring relationships with our clients and partners, ensuring a holistic approach where every voice is valued, and every vision is nurtured. Job Summary: We are seeking a mechanical engineer with a growth mindset and superior interpersonal skills. The ideal candidate is eager to grow in their career to become an industry leader. They will take calculated risks and thrive on autonomy. This role requires a team player with a passion for innovation, who is also a tireless learner, and capable of designing projects independently with the support of their peers. The ideal candidate will have a key role in interacting and building relationships with clients. Responsibilities: Performs routine code review and analysis. Performs routine design calculations and sizes standard equipment. Follows design standards set by the Project Manager, Lead Engineer, and Engineer of Record. Researches and presents equipment and design options to the Project Manager, Lead Engineer, and Engineer of Record. Follows company master design standards. Ensures that the QA/QC process is followed and documented. Develops a working knowledge of all system types within their discipline. Develops knowledge of current design trends and best practices. Directs less experienced technical staff in how to perform routine design tasks and routine calculations. Trains EIT's and designers how to perform routine calculations and system layouts. Creates project specific details, schematics, and sketches. Assembles specifications, including project specific information. You Will Need to Have: Associate or bachelor's degree in mechanical/electrical engineering or related field from an accredited university or college At least 4 years of related building systems design experience Proficient in Revit and/or AutoCAD Proficient in design software tools Microsoft Office Suite of products experience We Prefer that You Have: Licensed Professional Engineer (P.E.) certification Design your career and future with MCE! In return, you will enjoy a wide range of benefits that support your health and wealth, including: Great Medical, Dental, & Vision benefits Employer paid short term/long term disability and life insurance. 401(k) with generous employer match Paid community service day and floating holiday Flexible workplace options-in office and hybrid Monthly parking allowance or bus pass Salary Range: $60,000 - $110,000 annually. Individual employee compensation is determined with a wide variety of factors, including but not limited to, experience, education, knowledge, skills, geography, and performance. Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Sponsorship is not available. Candidates must be legally authorized to work in the United States. MCE is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, sexual orientation, gender orientation, gender identity, national origin, disability, or protected Veteran status.

Title: Sr Mechanical Engineer Compensation: 100k to 130k Type: Direct Constellation Search Group is seeking a Sr. Mechanical Engineer working directly for a global manufacturer of engineered Sealing Connection Tools for production testing, fluid transfer and other processing applications. This rapidly growing company has manufacturing facilities in Roseville, Minnesota and Shenzhen, China. About the Role Provide engineering level capabilities and execute on product development for new and custom products. Works from business case and new product request information to develop products. An interest or experience in managing others is desired. Responsibilities: Develop new products from a supplied Business Case and New Product Request Information. (i.e., Create Concepts, develop into product and guide through to full production and support). Create, research, design and develop new specialty connector component products or assemblies at an expertise Engineering level. Calculating FEA, DOE, leading DFMEA, etc. Process designs including detailing prints, procurement of prototypes, and all documentation. Create and maintain solid models and work within Inventor CAD with Vault Management environment. Test parameter development and execution for reliability engineering with follow-up analysis. Design products for custom applications (as required). Coordinate the procurement, manufacturing and testing of these products. Create layouts of product enhancements to support value-engineering activities. Perform cost analysis to support decision making. Benchmark competitive design/process, materials and function. Research and recommend processes, and material selections. Lead / assist in brainstorming / idea generation and help guide designs within the Engineering department. Document and record all aspects of product development. Be responsible for BOM accuracy, releasing drawings, and keeping schedule on track. Prepare documentation and conduct design reviews and release meetings as required. Assess training needs, develop training material, and provide training and coaching to manufacturing staff as needed. Communicate design status on a regular basis, including but not limited to status-based steps development process. Provide support and training for new and existing products. Lead/Participate in and be a resource to cross-functional teams to improve product concepts, product design and quality. Assist in guidance of lower-level design engineers. Actively seek out product improvements and upgrades to enhance the product and/or reduce costs. Travel as required to support product, find new opportunities, evaluate markets Experience: Requires BS degree in Mechanical Engineering and a minimum of 6+ years relevant experience in a mechanical design engineering position. Must understand machining principles and be able to provide required information to machinists. Strong engineering skills and a broad knowledge of principles, practices, and procedures for the completion of difficult technical problems and projects. Ability to adapt products based off standard designs. Ability to develop new products (i.e., detail, prototype, test, release, and provide support to production). Able to handle multiple tasks and conflicting priorities. Able to manage activities requiring immediate attention and activities that have long term impact. Understands the capabilities and limitations of fluid power products including all products. Must be solid model CAD proficient with 2000hrs in Inventor or SolidWorks. Knowledge of team building skills to lead small cross functional teams with the ability to work productively with internal manufacturing and external supplier organizations. Benefits: Paid time off Paid holidays Medical, dental, vision, life insurance, and AD&D 401k with employer match (first 3%) 401k profit sharing (up to 7%) Equal Opportunity Employer: We are deeply committed to building a diverse and inclusive team. We believe that different backgrounds and life experiences make our team better. We do not discriminate against qualified employees or applicants because of race, color, religion, gender identity, sex, sexual preference, sexual identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, military status, or any other characteristic protected by local law or ordinance.

We are seeking a Senior Product Engineer to support and enhance our neuromodulation medical devices. The ideal candidate will have extensive experience in troubleshooting, developing, testing, and debugging systems, with a deep understanding of FDA regulations and quality systems compliance. Key Responsibilities: Troubleshoot, develop, test, and debug neuromodulation systems. Analyze field returns and complaints to determine root causes and propose solutions. Redesign and test devices in compliance with global and FDA regulations. Collaborate with electrical and mechanical engineering teams. Update and maintain systems and processes to meet customer and regulatory expectations. Document and communicate tradeoffs and solutions to product issues. Build domain knowledge through customer visits, literature searches, and training. Ensure compliance with quality policies and procedures. Foster collaboration with cross-functional team members. Qualifications: Bachelor's degree in Engineering, Biomedical Engineering, or related field. Proven experience in system troubleshooting, development, testing, and debugging. Strong knowledge of FDA requirements and quality systems. Excellent communication skills. Ability to work effectively in a cross-functional team. Preferred Skills: Experience in the medical device industry, particularly with neuromodulation systems. Hands-on experience with device redesign and testing. Proactive learning and field engagement.

Job Title: Sr. Product Engineer - Medical Device Type: W2 Contract Are you an experienced Product Engineer with a background in Medical Devices? We are looking for a skilled professional with at least 6+ years of experience in product engineering, troubleshooting, and system development within a regulated environment. Key Responsibilities: 🔹 Troubleshoot, develop, test, and debug released medical devices. 🔹 Analyze field returns & complaints, identify root causes, and provide technical solutions. 🔹 Redesign and test devices in compliance with FDA regulations and global standards. 🔹 Collaborate with cross-functional teams including electrical & mechanical engineers. 🔹 Maintain and improve Neuromodulation systems to meet regulatory and customer expectations. 🔹 Communicate findings, tradeoffs, and solutions effectively to stakeholders. 🔹 Conduct literature research, customer & field visits, and training to enhance domain knowledge. 🔹 Ensure compliance with quality systems, policies, and regulatory requirements. 🔹 Foster a collaborative and inclusive work environment. If you have a strong background in medical device engineering, regulatory compliance, and troubleshooting, this could be a great fit for you! Education: Requires a University Degree and a minimum of 4 years of relevant experience, or advanced degree with a minimum of 2 years of relevant experience.

Responsibilities Perform full design of HVAC systems including full equipment selection for small to medium commercial projects. Perform heating cooling loads calculations. Experience in duct work layout is a plus but not necessary. Analyze system options and evaluate existing systems where appropriate. Hydronic System Design and Piping is a plus but not necessary. Complete full design in accordance with code. Production is performed using AutoCAD and Revit depending on preference of architect. Provide bid and construction phase services including reviewing bids, answering RFIs, reviewing shop drawings, participating in project walk throughs and providing field observation reports. PE and EIT positions available if you have more experience

Researches, plans, analyzes, designs, and develops mechanical products such as ammunition handling systems, structures, gun systems, missile launchers, mechanisms, and other devices. Performs technical analysis, testing, and evaluation of moderately complex engineering problems using specialized equipment and computer programs. Analyzes and interprets design specifications, drawings, documents, models, and test results to ensure technical designs comply with applicable engineering standards, military specifications, and product requirements. Develops and writes technical documentation, makes revisions to existing documentation, and provides input to technical papers or presentations. May deliver technical presentations related to production support activities. Provide design & manufacturing production support for U.S. Navy Vertical Launching Systems & Canister products. Reduce to practice innovative payload support mechanism development design concepts with team to 3D CAD model. Present weekly Change Notices to Material Review Board (MRB) including end item mechanical & electrical component selection. Function as Technical point of contact (POC) on government contracts for Engineering Change Proposals (ECPs) & Notice of Revisions. Create & maintain product parts, assemblies & drawings using PTC Creo Parametric 4.0 M080 modeling software. Provide Production support from shop floor development through full scale production, and processed MRB (NCs, CAs, etc.). Collaborate with Suppliers, Procurement, Quality, Operations, and Electricians on design & manufacturing issues Performs complex engineering design, development, analysis, experimentation, test, and product assurance tasks of limited complexity for assigned portions of a project. Solves moderately complex engineering problems which have not been clearly defined and may not have similar precedents available. Ensures tasks meet cost, quality, schedule, and performance requirements. Applies wide range of engineering design and analytical theory, principles, techniques, and practices to a complex portion of a technical project. Develops and maintains effective relationships with customers. Acquires and maintains up-to-date knowledge of relevant engineering disciplines, industry practices, trends, and applications Maintains a safe work environment and ensures compliance with safety policies and rules. Provides input to project leaders for the development of project plans, schedules, and budgets. Required: Must have working knowledge of creating moderately complex solid models and mechanical designs using CAD systems, preferable PTC Pro-E or CREO. Ability to solve moderately complex technical design and development problems that require a professional level of engineering knowledge. Strong communication skills (verbal and written). 4 years relevant work experience Bachelor's degree in mechanical or aerospace engineering Military experience equivalency may substitute for some requirements Must be a U.S. Citizen in order to be eligible to obtain Security Clearance Preferred: Familiarity with relevant military and commercial design standards. Familiarity with current computer applications and technologies in applicable engineering disciplines. Experience with Root Mean Cause Failure Analysis Experience in military product production environment Ability to perform hands on work in solving production related issues. We are an equal opportunity employer and will consider all applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability and/or other protected categories. We are also committed to providing reasonable accommodation(s) to qualified individuals with disabilities or needs, as required by law.

Rogers, Minnesota based EnDiSys manufactures and distributes equipment to move, measure, control, dispense and spray a wide variety of fluid materials to the industrial, pharmaceutical, sanitary and contractor markets. Job Purpose: To define and develop products used in fluid handling systems. Position involves multiple project responsibility from recognition of need through project completion. Essential Duties: Perform Engineering tasks in the development of new products and cost reduction. Participate in development of Product Specification. Produce conceptual designs. Guide development process to produce practical designs. Create detailed design drawings. Identify applicable standards. Provide analysis of design to applicable standards. Provide analysis of design using engineering analysis tools and techniques (e.g., Finite Element Analysis). Review instruction manuals and product literature. Define and lead prototype development and lab and field tests. Work with manufacturing on process development. Conduct design reviews, safety reviews, etc. Leader of small new product development projects as required. Complete project feasibility and Pre-Prod authorizations. Create and maintain project schedules. Manage project to meet schedules, including: o Working with other team members to ensure satisfactory completion of all steps in development process. o Identification and communication of threats to schedule to appropriate management. Work effectively in a team environment. Participate in release-for-sale activities. Provide periodic oral and written reports of project status. Participate in identification of new product opportunities for EnDiSys by: Recognizing customer product needs. Evaluating EnDiSys and competitive products. Proposing and developing proper technology to fulfill customer needs. Direct and perform standard product support activities such as: Analyzing and writing Engineering Change Orders for products. Troubleshooting product problems in manufacturing, lab, or customer sites. Initiating corrective action activities. Learn, participate in development, and apply knowledge of: Stay abreast of developments in technical field to maintain technical knowledge. EnDiSys product line. Operational systems. EnDiSys and industry design standards. EnDiSys customer applications and requirements. Emerging trends in our customers' markets. Other duties as assigned. Position Requirements: BS degree in Engineering from an accredited institution or equivalent. Excellent oral and written communication skills. Excellent engineering/technical aptitude. Solid modeling design experience. Minimum of 2-3 years' experience in new product development with demonstrated ability to independently produce innovative and successful designs. Ability to recognize customer product needs and trends in the marketplace that affect product requirements. Proven Quality. Technology Leaders. Launch your career with EnDiSys ! EnDiSys offers attractive compensation, benefits and career development opportunities. EnDiSys ' comprehensive benefits include medical, dental, 401(k), and more. Desirable Qualifications: Knowledge of hydraulic systems. Machinist/assembly/metal forming experience. Experience with Just-In-Time principles and implementation. Understanding of SPC and Total Quality concepts. Job Type: Full-time Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Retirement plan Schedule: 8 hour shift Day shift Monday to Friday Work Location: In person

Purpose The Product Applications Engineer is a key team member of the Natur-Tec group reporting to Director, R&D and is responsible for supporting the process development and commercialization of innovative biobased/biodegradable products. The successful candidate will provide engineering support to the team in the way of process engineering and testing. Roles and Responsibilities · Lead and coordinate successful engineering trials at customers · Lead production scale-up at global sub-contract manufacturing partners and other Natur-Tec manufacturing locations. · Take the lead in running lab equipment, including the twin-screw compounding extruder and blown film extruder. · Develop prototypes and benchmark samples for new applications · Support development of new specifications and datasheets for new Natur-Tec products. · Support continuous improvement efforts in manufacturing and cost reduction initiatives. · Some domestic and international travel is expected, with mainly travel to contract manufacturing locations and customer locations worldwide, for technical support. Qualifications and Education Requirements MS/PhD in Chemical Engineering/Polymer Chemistry/Plastics Program is required. 2-4 years' experience in the plastics industry preferred Hands-on experience with plastics processing techniques such as twin-screw extrusion, blown or cast film extrusion, injection molding, or other related processes is desired Familiar with the analytical test methodologies such as DSC, TGA, FTIR, etc. Have the ability to work in a global team set-up Effective communication skills Efficient program management skills Physical Requirements of Job: Tasks require standing and walking, or frequent light lifting up to 10 pounds; occasionally required to lift up to 50 pounds; or minimal dexterity in the use of fingers, limbs, or body in the operation of shop or office equipment. Tasks may involve extended periods of time at keyboard or testing stations. Exposure and involvement working with various chemicals and testing stations/equipment will require mobility. ISO Every employee is expected to support the NTIC Quality Management System (QMS) in accordance with our Quality System Manual and Quality Control Procedures.

Project Engineer - Heavy Civil Construction We are seeking a Project Engineer to support construction projects in the Minnesota region. This role involves working closely with Project Managers, Engineers, and Superintendents to ensure successful project execution from start to finish. Responsibilities Assist field teams, including Project Managers and Superintendents, with project execution. Communicate effectively with design teams, subcontractors, and other stakeholders. Help coordinate project layout and identify critical work items. Assist in procurement of long-lead materials and equipment. Interpret construction drawings and specifications for field teams. Ensure subcontractor work meets project specifications and quality standards. Generate and process RFIs as needed. Participate in safety programs and ensure compliance with OSHA regulations. Qualifications Bachelor's degree in Civil Engineering, Construction Management, or a related field. Previous experience in construction preferred, with heavy civil experience being a plus. Familiarity with scheduling software (Primavera P6, MS Project) is a plus. Recent graduates are encouraged to apply. This role offers the opportunity to work on large-scale infrastructure projects, develop key industry skills, and be part of a team dedicated to building the future.

Start Recruiting is excited to partner with a Twin Cities based, clinical stage, start-up in the search for a Senior or Principal R&D Engineer who is experienced the the development of Class III implantable devices. The Principal Engineer will be responsible for design and development of an investigational structural heart implant. This position will lead next generation projects and ensure a rapid introduction to clinic of new designs. The primary focus of this position will be implant design, development and testing. Key Responsibilities: Serve as the R&D technical lead for the development of our next generation device, and provide technical leadership related to product design. Design and develop product(s) in compliance with the company's Design Control requirements and applicable regulatory requirements. Develop protocols/reports and perform product in-vitro, in-vivo as well as verification and validation testing. Supporting regulatory submissions for next generation devices, by ensuring compliance to requirements (US & OUS). Working cooperatively with process development, quality, manufacturing, regulatory and clinical to ensure project success. Experience & Skill Requirements BS in Mechanical Engineering, Biomedical Engineering, or related field. Principal : 10+ years of Class III medical device design experience with a Bachelor's degree. Senior : 7+ years of Class III medical device design experience with a Bachelor's degree. Implant testing experience (e.g. hydrodynamic testing, AWT, simulated use testing) History of Physician and KOL interaction This is an opportunity to be part of an innovative and driven team who is solving critical problems in the structural heart space! This is an ONSITE position with a professional and flexible work environment that values work / life balance. VISA Sponsorship support will not be offered Start Recruiting, Inc. is a boutique recruitment firm located in Minneapolis, MN with expertise in representing technical and technical leadership opportunities within the medical device community. We partner with F500, mid-sized, emerging and start-up companies. Over 20 years of experience developing relationships with our clients and candidates Represent opportunities within the “hidden” job market Functions we serve include R&D, Process Development, Manufacturing, Systems Engineering, Software Development, Quality, Regulatory, and Project / Program Management. Whether you are early in your career, or seeking a senior level leadership role, we would like the opportunity to learn more about your career goals and how we can help you achieve them through your employment transition.

Duration: 12 Months Contract (Possible Extension) About the Role: Position will mainly focus on executing safety related improvements in an area supporting Electropolishing equipment and blasting equipment. Job Purpose Provides daily support of products, processes, materials, and equipment in order to achieve production goals (i.e., quality, delivery, cost, productivity, and safety). Key Responsibilities 1. Works cooperatively with R&D, Process Development, Quality, Production, Regulatory, Equipment Engineering, Supply Chain, and Marketing to ensure project success. 2. Designs and coordinates standard engineering tests and experiments. 3. Designs, procures, and fabricates equipment tooling and fixtures. 4. Performs troubleshooting on new and existing products/process problems as related to design, material, or processes. 5. Summarizes, analyzes, and draws conclusions from test results. 6. Completes and manages Capital Equipment Request Authorizations (CERA's). 7. Prepares standard reports/documents to communicate results to the technical community. 8. May lead cross-functional project teams. 9. Identifies, implements, and manages equipment requirements to support production goals. 10. Trains and/or provides work direction to operators/technicians. Qualifications 2 Years with BS or 0-2 Years with MS Automated process knowledge Preferred Skills: 1. Experience with manufacturing equipment including gantry systems. 2. Safety mindset with experience working with product builders. 3. Experience with electrochemical metal finishing processes. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To learn more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Name: Kanika Dureja Email: ******************************* Internal Id: 25-33869

Join us at Ancoats - a fast-growing, boutique construction company based in the Twin Cities. We believe in simplicity, and as such we have two priorities: our customers and our people. We'd love for you to come aboard at the ground floor, where you can grow your career alongside the business, accelerate quickly, and be rewarded for your contributions with industry-leading compensation and benefits. Your future is bright at Ancoats! The ideal candidate is well-versed in partnering with subcontractors, design partners, and customers to advance construction projects in a safe, organized and timely fashion. They will also effectively identify and monitor project risks on behalf of the company and customer. Our company believes customer service is paramount. This candidate must be a natural leader with the proven ability to communicate effectively with all project stakeholders. Responsibilities The Project Engineer is primarily responsible for the coordination of construction projects in support of the Superintendents and Project Management team. Tasks may include but not be limited to: RFIs, Submittals, and Change Management including coordination with trade partners, superintendent, and project manager Field Verification of in-progress work, including Quality and Safety inspections Interface with Design Partners and Customers with professional, confident communication including solution-focused issue resolution Schedule review and management, including material procurement per required deadlines Effectively run meetings with project partners Review of design documents for completeness and constructability Qualifications Bachelor's Degree in related field (Construction Engineering, Civil/Architectural Engineering Construction Management, or other applicable engineering degree) Strong business acumen in project planning and management Strong verbal, written, and organizational skills Position may include short term ( Professional attitude and strong customer service skills

Industrial Inspection & Analysis is looking for an Application Engineer to join our Lab group at our Minnetonka, MN location. The Application Engineer is primarily responsible for supporting Engineering Services projects as a subject matter expert completing customers projects in a timely fashion and within budget. Engineering functions include CT and Laser scanning, Reverse Engineering, Virtual Dimensional Inspection, Comparative Analysis, Computer Aided Verification (CAV), and more. ESSENTIAL FUNCTIONS: Provide Story Worthy service to our Engineering Services customers ensuring that projects are accurate, complete, and delivered on time. Operating multiple scanning platforms to accurately capture part geometries and editing point cloud data to produce optimal scan quality. Able to work with multiple software packages including SolidWorks, Polyworks, Geomagic Wrap, Smart Profile, Design X, Control X. Completing customer projects including CAV, Reverse Engineering, Inspection, or Modeling. Grow and maintain strong relationships with existing customers while developing relationships with new customers. Working closely with customers to gather information for quoting and complete project closeout meetings. Maintain a clean work environment that always offers customers a “tour ready” appearance. Nondestructive Testing (NDT) using CT and Radiography. EDUCATION, EXPERIENCE, AND COMPETENCIES REQUIRED BS Mechanical Engineering or related degree from an accredited college or university Experience with metrology and model-based inspection methods using structured light scanning, laser scanning, CT Scanning, Real-Time X-Ray, and/or FARO Measuring Arm. Proficient using SolidWorks. Advanced modeling techniques including surface modeling and reverse engineering from point cloud or mesh data greatly preferred. Strongly prefer manufacturing experience in Injection Molding, Machining, Additive Manufacturing, or similar industry. Understanding of Geometric Dimensioning and Tolerance (GD&T) and general blueprint reading. Strong skills with Microsoft Office suite including Word, Excel, etc. Be a confident problem solver able to make timely decisions independently. Be a motivated, results-oriented professional with a strong willingness to learn, independently if necessary. Ability to work with cross-functional teams across a broad range of disciplines. Excellent communication skills and strong ability to work with customers Nondestructive testing background and/or certifications a plus.

Job Title: Research Engineer ( Entry Level ) Position Type: Full-time with HCL Tech Role/Responsibilities Basic knowledge in System Engineering testing. Exposure to Medical device is preferable. Strong documentation skills are required. Interest and passion to work on the Design verification of Medical devices. Strong team player and has good communication skills. Should be able to understand the Test protocols , execute, record the results, perform data analysis in Minitab. Capable of handling Test Equipment's, fixtures and devices. Qualifications & Experience Minimum Requirements Bachelor's in Biomedical Engineering Pay and Benefits Pay Range Minimum: $30 per hour Pay Range Maximum: $32 per hour HCLTech is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to ****************** for investigation. A candidate's pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year How You'll Grow At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Integrity Engineer in Duluth, Minnesota or Minneapolis, MN responsible for managing and providing engineering support to integrity activities in the energy sector. Typical activities are anticipated to include integrity risk assessment, integrity inspection coordination (NDE, indirect survey, In-Line inspection, etc.), fitness for service, and executing remediation strategies. Qualified individuals will have a strong technical foundation, excellent interpersonal skills, and proven client management abilities. This individual is expected to build client trust. Required: Bachelor of Science or higher in Engineering, Chemistry, or Physics Proficiency with CFR 193, CFR 192, CFR 195, CFR 1910, API 570, API 510, API 579, ASME B31.8, ASME B318S, ASME B31G 5+ years of experience in materials, corrosion, inspection and/or integrity engineering Experience managing, planning, and executing preventative maintenance or integrity programs in an energy sector pipeline environment Professional Engineer (PE) certification or ability to obtain PE certification within one year Experience working as a consulting engineer and/or in a seconded role Commitment to providing client-focused service, treating coworkers and clients with kindness and respect. Proactive in identifying and solving problems with minimal guidance. Duties and Responsibilities: Identify integrity threats Provide engineering support and coordinate field inspection activities Develop and execute detailed integrity inspection plans Complete integrity threat assessment (pipeline and pressure vessels) Perform fitness-for-service evaluations Select inspection and indirect survey techniques Support In-Line Inspection projects Assess pipeline damage and determine fitness for service Complete root cause analysis (RCA) of findings

Are you an experienced Senior Cisco Contact Center Engineer with a desire to excel? If so, then Talent Software Services may have the job for you! Our client is seeking an experienced Senior Cisco Contact Center Engineer to work at their company in Bloomington, MN. Position Summary: Currently hiring for a Senior Cisco Contact Center Engineer . This role is accountable for the applications and telephony infrastructure supporting contact center agents across the organization. In this hands-on role, you will leverage your knowledge of contact center best practices to support our contact centers. Primary responsibility is to collaborate with our leaders and employees to design and implement contact center solutions that meet our business needs. The candidate must have excellent communication skills and ability to explain technology to non-technical individuals. The candidate must be able to manage multiple work streams and have excellent time management to meet agreed upon deadlines. Other responsibilities include developing, installing, troubleshooting, and maintaining Cisco contact center systems and solutions. The engineer will resolve issues and perform installations in collaboration with other Cisco engineers and analysts, infrastructure teams, network team, business users, and vendors. The engineer will develop, test, and update disaster recovery plans, ensure security compliance and change management. This position also analyzes utilization levels, monitors traffic, proposes configuration or technology changes to meet service levels, and oversees the design and execution of upgrades and maintenance activities on the contact center platforms. The engineer in this role will also participate in projects, strategic initiatives, and provide recommendations and strategic advice. Primary Responsibilities/Accountabilities: Provides support on the selection, implementation, installation, and maintenance of all communications related systems. Troubleshoots contact center and communication systems issues. Coordinates with vendors and organizational staff the installation and planning of moves, adds, and changes of services. Tests and updates disaster recovery plans; ensuring adequate availability and capacity for enterprise communications. Conducts telecommunications analyses and identifies cost savings opportunities. Analyzes quarterly traffic/busy studies for the telephone and voicemail systems/network/ACD groups. Assists with the assessment and optimization of hardware, software, and network design through review and analysis of user needs. Monitors utilization levels and trends throughout the organization to determine if service levels are being met. Conducts feasibility studies for small to moderate projects. Coordinates project tasks, ensuring adequate planning and resource allocation. Creates, maintains, and updates Contact center and communication systems infrastructure diagrams and other documentation. Participates in technology roadmap discussions and planning. Qualifications: Bachelor of Science in Information Systems, Telecommunications, or Business Management or equivalent experience 5+ years of experience in hardware/network design, equipment vendors and carriers and specifically the following systems on prem or on the cloud: Cisco Unified Contact Center Enterprise (UCCE) Cisco Finesse Cisco Unified Intelligence Center (CUIC) Cisco Unified Communications Manager (CUCM) Cisco Unity Connection (CUC) Cisco Unified Customer Voice Portal (CVP) Passion for helping customers & exceeding customer expectations. Excellent people skills and ability to build effective relationships with staff at all levels. Design, Implement, Edit and Optimize call flows. Excellent oral and written communication skills Detail-oriented and proven organizational skills. Strong interpersonal relationship skills Strong critical thinking skills Excellent desktop tool usage including Word, Excel, Access, and PowerPoint functionality. Experience with Agile project management and Scrum methodology Exercise considerable initiative, planning, judgment, and work independently. Experience performing disaster recovery testing. Drive to any location, and be available outside normal business hours, including weekends. Serves on a team on-call rotation schedule to address emergency production issues after hours. Translate technical jargon and concepts into easy-to-understand language. Knowledge of VOIP and QOS General Understanding of Network Protocols e.g.: DHCP, DNS, LDAP, VLANS, SIP, FTP, SSH, and TCP/IP Preferred: Cisco Certifications or have relevant experience. SIP voice services experience. SIP / CUBE Knowledge SIP integrations to 3rd party applications (Avaya Session Manager, Cisco CVP, etc.) Voice Gateways configuration, deployment, and troubleshooting. Courtesy Call Back (CCB) Experience building/designing new queues. Providing support and reporting Ability to reverse engineer existing queues. Cisco Emergency Responder (CER) Calabrio/call recording: Experience with infrastructure support and troubleshooting QM forms design experience Experience with the Calabrio WFM module