Operator Jobs in North Saint Paul, MN

PRODUCTION OPERATOR (2nd shifts)-- As a ProMed employee, you will contribute to the manufacture of products that have a significant impact on people's lives. Through honesty, integrity, and collaboration, we strive to be the very best as we hire the very best. ProMed was founded in 1989 addressing an industry need for cleanroom manufacturing of silicone components, specifically those having a medical application. We treat every component and finished device as though it will be used by a beloved family member or friend. We are dedicated to our customers and to our employees while helping to improve the health and well-being of people around the world. Working as one to help many. Position Summary The Production Operator is responsible for performing a variety of manual, semi-automated or automated tasks necessary for the manufacturing of sub-assemblies and/or final product. The Production Operator is responsible for maintaining productivity, quality, on-time delivery and safety of self and co-workers. This position operates under minimal guidance from management or senior staff. The Production Operator ensures ProMed's brand, philosophy, systems, policies, and procedures are properly implemented and observed. ESSENTIAL DUTIES & RESPONSIBILITIES Position duties and responsibilities include, but are not limited to the following: Follows manufacturing procedures, including documentation of product traceability; Operates the required manufacturing equipment in a safe and efficient manner using designated tools; Meets established production standards; Completes assembly-related tasks like gluing, heat-shrinking, and resistance welding; Supports research and development projects, as needed; Performs press setups, as required; Reads, comprehends and performs duties as outlined in the Standard Operating Procedure (SOP); Follows all start up and shut down procedures; May provide temporary support to other production teams as business needs demand; Meets expectations of regular, reliable attendance; Other Duties as Needed: Any other duties and tasks as deemed necessary and appropriate. QUALIFICATION, EDUCATION & EXPERIENCE To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Required: High School diploma or equivalent; Fine motor skills in hands/wrist and good hand/eye coordination; Good vision (with or without corrective lenses); Must be able to read, write, speak and comprehend written and verbal instructions in English; Ability to stand for extended periods of time; Ability to sit for extended periods of time; Ability to work independently with minimal supervision; Ability to meet deadlines and priorities; Preferred: Experience using a microscope/reticle; Experience in thermoplastic or silicone molding and inspection; Clean room component or device level manufacturing experience; Knowledge of ISO 13485 (current) Standards. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the principal roles and responsibilities of this job. Exposure to heated/air conditioned, ventilated facilities with florescent lighting; Exposure to building where a variety of chemical substances are used for cleaning, and/or operation of equipment; The noise level in the work environment is usually minor; Duties are performed indoors; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL, SENSORY, COGNITIVE & NEUROLOGICAL DEMANDS While performing the duties of this job: The employee may be required to stoop, bend, squat, kneel, reach, stand, walk, lift, pull, push, grasp, talk, hear, see and use repetitive motions; Specific vision abilities required include close vision such as to read handwritten or typed material and the ability to adjust focus; The position requires the individual to meet multiple demands from several people and interact with internal and external people; Employee moves about the building and be able to maneuver in tight spaces between desks, etc.; Employee may have duties involving walking on even or uneven surfaces; Employee occasionally to frequently use a whiteboard, which can require grasping whiteboard pens, reaching at, below, or above shoulder height and may require trunk or neck rotation to look back; Employee may use computers, overhead projectors, TV, and other work-related equipment, which may require an approximately 25+ pound force to push or pull equipment; It is necessary to grasp and manipulate pens, markers, scissors, staplers, etc. occasionally to frequently. Employee must see and hear on a continuous basis as well as speak frequently; Position varies from standing, sitting, walking, etc. On some occasions it may be necessary to move quickly, run, etc. over smooth or uneven surfaces. ProMed offers a generous benefits package including: 401k with company match Profit sharing Medical Insurance Health Savings Account/Flexible Spending Account Dental Insurance Vision Insurance Life Insurance Short, and Long-Term Disability Insurance Critical Illness, Accident, and Identity Theft Protection Pet Insurance ProMed does not discriminate in employment opportunities or practices on the basis of race, color, creed, religion, national origin, ancestry, age, sex, marital status, order of protection, disability, military status, sexual orientation, gender identity, pregnancy, public assistance, family status, unfavorable discharge from military service, genetic information or other segmenting factor protected by law, or local human rights commission activity.

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a **Directional Drill Operator** to join our team in **Little Canada, MN** . In this role you will operate drilling equipment in both standard and high-risk areas, with live utilities. You will perform conduit splicing, vault/pedestal placement and fiber/coax placement as well as general restoration and cleanup. **Why TAK?** + Full Time + Paid Weekly + **Compensation: $25 - $40 hourly, DOE** + Full Benefits Package (Medical, Dental & Vision) + Paid Time Off + 401(k) with Company Match! + 25K Company Paid Life Insurance + Independent Work & Team Collaboration + Career Development & Advancement Opportunities! **The Role** + Operates drilling equipment to complete assigned projects + Completes drilling in both standard and high-risk areas; with live utilities + Maintains a working knowledge of utility depths and placements + Ensures vehicles, equipment and tools are properly maintained, in good repair and secured in a safe manner + Ensures all utilities have been located and a visual verification complete prior to job start + Performs conduit splicing, vault/pedestal placement and fiber/coax placement as needed + Completes general restoration and cleanup + Completes all projects with safety as the #1 priority, ensuring compliance with internal safety standards and all governmental orders + Other duties as assigned Requirements + 1+ years of directional drilling experience required + Class A CDL preferred + Ability to travel daily, ability to work outside of business hours when needed, overtime, holidays, evenings, weekends etc., in all seasons + Excellent customer service, time management, problem-solving and troubleshooting skills + High level of energy, motivation and attention to detail + Ability to multi-task, shifting from one task to another without interruption + Ability to work with a noise level from moderate to loud + Ability to lift and carry up to 70lbs as needed + Ability to complete work outdoors, in tight spaces or elevated by bending, reaching, twisting, climbing in all weather conditions year round + Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools + Valid driver's license with satisfactory driving record, void of suspensions or revocations + Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) _The_ _compensation_ _and_ _benefits_ _information_ _is_ _accurate_ _as_ _of_ _the_ _date_ _of_ _this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law._ Equal Employment Opportunity (EEO) Employer _All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran_ Salary Description $25 - $40 hourly, DOE

CNC Operator - 2nd Shift Envision your machining experience at work with an industry leader! Enjoy a supportive and inclusive atmosphere with a wide-ranging benefits package, and excellent job security! For over 70 years, Tolomatic has been a family-owned company and over that time has become an innovative leader in pneumatic and motion control products with a global reach. Take advantage of this opportunity to use your machining skills while working on a variety of made-to-order projects. As a part of the team, you will enjoy: A clean, modern, climate-controlled work environment. Convenient location off Highway 55 offering an easy commute. Starting Pay Range of $23.00 to $30.00 an hour - DOE. Signing bonus available up to $3,000 depending on shift Great employee benefits including: Medical, Dental, Disability, Life, PTO, Profit Sharing, 401K Plan, Annual Bonus and Tuition Reimbursement. Real, achievable advancement opportunities. Due to rapid growth, Tolomatic is looking for Machine Operators for our 2nd shift: 2 nd shift hours are 3:25 pm to 1:55 pm Monday-Thursday or 3:25pm to 11:55pm Monday-Friday ($1.50/hour Shift Premium) About You: High school education or equivalent - machine shop class work desired. At least 6 months to 1 year of related CNC milling/turning machine center and/or manual machining experience in a related manufacturing environment. Ability to operate saws and work in annealing center. Knowledge of blueprint reading and mechanical inspection. Knowledge of shop math and ability to read a tape measure. Strong mechanical aptitude. Displays a positive attitude and willingness to work in a team environment Primary Objective: Our Machine Operators operate CNC milling/turning machine centers and/or manual machinery (mills, drills, lathes, saws, etc.) to perform routine or repetitive operations in a manner which consistently meets customer specifications, quality requirements, and production standards. To perform plating operations in a manner which consistently meets quality requirements and production standards. The Company: Tolomatic is a leading supplier of electrical linear actuators and electric linear motion control and pneumatic actuators and cylinders. Tolomatic has earned its industry-wide reputation for designing and manufacturing highly durable and reliable electric linear and pneumatic actuators, and power transmission products for a variety of industries including packaging, material handling, medical, food processing, automotive, semiconductor, and general automation. If you have previous experience in CNC Operations, we want to hear from you! Do not miss out on this opportunity. Join the Tolomatic team today! All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex, national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law.

Production Operators are responsible for moving product from machine, cleaning it, assembling as required and stacking finished parts or goods Additional Information All your information will be kept confidential according to EEO guidelines.

At Imagine we go beyond print to help our clients deliver game-changing visual communications from concept to delivery that set the standard for our industry. The first step in this process is hiring great employees! Our innovative teams are the most committed, highly experienced artisans in the business. We are committed to delivering high-quality marketing solutions, in every environment and campaign, helping our clients capture the heart, minds, and loyalty of their customers. For more than 30 years, The Imagine Group has established itself as one of the most influential and innovative visual communications companies in the industry. Join us and let's Imagine a better way together. Position Summary: The Operator, Assembly Machinery is responsible for all aspects of operating assembly equipment to production and quality standards, within budget and on time. Shift: Monday - Friday, 10:45pm - 7:15am Essential Functions & Responsibilities: Reads instructions for job ticket and sets the machines up or directs set-up of machines based on instructions. Responsible for make-ready/set-up to ensure proper machine set-up Responsible for optimum speed, registration, and quality according to established standards. Run, adjust, and troubleshoot production jobs on the machinery. Works in collaboration with operators, maintenance, and engineering to optimize the equipment for running efficiency. Travels to machine vendors for hands on training in order to accurately operator machinery and train Imagine associates onsite. Responsible for performing preventative maintenance. Maintains and provides production logs and reports, as necessary. Accounts for labor and materials consumed through accurate data collection. Assists management in the training of production personnel across multiple shifts on how to operate machinery. Assists in general cleaning up and keeping the work area neat and orderly. Deals with customers and clients in a professional and polite manner as needed. Works overtime as needed. Other duties as assigned. Minimum Qualifications: High school diploma or GED equivalent Knowledge and Skills: Previous experience on the same or functionally similar press required. Knowledge of how to mix and produce correct color in printing. Ability to read and understand oral/written instructions. Math skills including addition, subtraction, multiplication, and division. Problem solving skills. Knowledge of press operations and functions. Reliability through attendance, punctuality, and attention to workstation. Positive safety attitude. Working Conditions and Physical Requirements: Occasional climbing onto press. Occasional reaching, bending, and stooping. Frequent Standing for prolonged periods of time. Ability to lift, push and pull: 50 pounds. The national pay range for this role is $25.00 - $28.00/hour. The pay range may be slightly lower or higher based on the geographic location. The actual pay offered may vary based upon, but not limited to: education, skills, experience, proficiency, performance, shift and location. In addition to base salary, depending on the role, the total compensation package may also include participation in a bonus, commission or incentive program. Imagine offers benefits including medical, dental, and vision coverage, paid time off, disability insurance, 401(k) with match, life insurance and other voluntary supplemental insurance coverages, plus tuition assistance, caregiver leave, adoption assistance, and employer/partner discounts. Imagine is an equal opportunity employer and does not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. Diversity and Inclusion is not just a checked box, it is a critical part of our commitment to deliver innovative solutions to our clients and provide a great place to work for our entire Imagine family. We are focused on building a diverse and inclusive workforce. If you are excited about this role, but do not meet 100% of the qualifications listed above, we encourage you to apply.

div itemprop="description"section class="job-section" id="st-company Description"divp class="googlejobs-paragraph--empty"/ph2 class="title"Company Description/h2/divdiv class="wysiwyg"p360 IT Professionals is a Software Development Company based in Fremont, California that offers complete technology services in Mobile development, Web development, Cloud computing and IT staffing. Merging Information Technology skills in all its services and operations, the company caters to its globally positioned clients by providing dynamic feasible IT solutions. 360 IT Professionals work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. /pp Our services are vast and we produce software and web products. We specialize in Mobile development, i. e. iPhone and Android apps. We use Objective C and Swift programming languages to create native applications for iPhone, whereas we use Android Code to develop native applications for Android devices. To create applications that work on cross-platforms, we use a number of frameworks such as Titanium, PhoneGap and JQuery mobile. /pp Furthermore, we build web products and offer services such as web designing, layouts, responsive designing, graphic designing, web application development using frameworks based on model view controller architecture and content management system. Our services also extend to the domain of Cloud Computing, where we provide Salesforce CRM to effectively manage one's business and ease out all the operations by giving an easy platform. Apart from this, we also provide IT Staffing services that can help your organization to a great extent as you can hire highly skilled personnel's through us. /pp We make sure that we deliver performance driven products that are optimally developed as per your organization's needs. Take a shot at us for your IT requirements and experience a radical change. /p/div/sectionsection class="job-section" id="st-"divp class="googlejobs-paragraph--empty"/ph2 class="title"Job Description/h2/divdiv class="wysiwyg" itemprop="responsibilities"pTitle/ Designation: Print Production Level 3 br/Duration : 6 Months+ br/Interview Type : In Person br/Location : Minneapolis MN 55445 br//p/div/sectionsection class="job-section" id="st-qualifications"divp class="googlejobs-paragraph--empty"/ph2 class="title"Qualifications/h2/divdiv class="wysiwyg" itemprop="qualifications"pbspan Essential Functions:/span/b/ppbspan Need 3 people on first shift 7:30 am - 4:00 pm Need 3 people on second shift 3:30 pm - 12:00 AM Need 2 people on third shift 11:30 PM - 8:00 AM Printing experience would be really good since they have to deal with printing, computer skills and be technically inclined/span/bbspan/span/b/ppbspan SKILLS:br/Able to demonstrate computer skills Functional knowledge of PC (keyboard functions, mouse, etc. ) Able to demonstrate Intermediate use of: MS office (Word, Excel, PowerPoint), Web, Internet, and Intranet -- Create spreadsheets -- Use standard formulas -- Sort -- Filter, and create graphs -- Import/export information -- Embed files into applications -- Move data between Word and Excel Able to demonstrate ability to use / locate devices (drives, files, printers). /span/b/ppbspanbr//span/b/ppbspanbr//span/b/p/div/sectionsection class="job-section" id="st-additional Information"divp class="googlejobs-paragraph--empty"/ph2 class="title"Additional Information/h2/divdiv class="wysiwyg" itemprop="incentives"p/ppbspan/span/b/ppbspan Thanks and Regards,/span/bspanu/uu/u/span/ppbspan/span/b/ppb span/span/b/ppb Amrita Sharma /b/pp408 766 0000 EXT. 426/ppamrita. s@)360itpro. com/ppb/b/pp/ppspan/span/pp/ppb/b/pp/pp/p/div/section/div

Reporting to the Production Manager, Production Supervisor or designate; the Robot Operator is responsible for operating and maintaining the robot welder. ESSENTIAL DUTIES AND RESPONSIBILITIES: Load parts in appropriate fixturing and run robot welder while maintaining established productivity rates & quality requirements. Examine welded sections for defects and perform necessary rework of bad welds. Reference prints and work instructions to determine the appropriate materials, tools, resources, and procedures for effectively completing processes. Perform in-process quality checks to verify parts meet customer specifications using test fixturing, rulers, micrometers, calipers, etc. Perform minor machine adjustments & preventative maintenance. Analyze and resolves work problems, or assist in solving work problems. Work in a safe manner by wearing proper PPE & following all safety procedures/polices. Comply with ISO 9001 standards and practices. Maintain a clean and efficient workspace. Assist in training other welders. COMPETENCIES: Strong math skills, visual inspection, and computer literate Strong planning, organizing, and time management skills. Able to work collaboratively and/or independently. Must be able to interpret and work from prints, work orders, specifications, and verbal direction MINIMUM QUALIFICATIONS: 1-2 year welding certificate from college or technical school AND/OR 1-2 years prior welding experience in a manufacturing environment OTHER REQUIREMENTS: Good manual dexterity and ability to use a variety of torches, hand tools, and power tools safely May be required to pass weld test Base Pay Range: $20-$25 per hour Compensation Disclosure: At Phillips and Temro Industries, base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. The base pay range for this role is listed above. Your base pay will depend on your skills, education, qualifications, experience, and location. The final salary offer will be based on these criteria and may differ based on the candidate's experience and qualifications and other job-related reasons. If you have any questions about the salary range, the compensation structure, or benefits offered feel free to reach out to *********************** Benefits Available to Full-Time Employees: Health insurance, dental, and vision (cost-share) HSA/FSA STD and LTD (company provided) Basic Life and AD&D (company provided) Voluntary Supplemental Life EAP (company provided) Voluntary Accident, Critical Illness and Hospital Indemnity 401K plan with employer match Paid time off (PTO) and holidays Volunteer hours Annual bonus based on company performance Tuition Reimbursement Paid Parental Leave Safety shoe and safety glasses reimbursement

Job Title: Production Operator $2,000 Sign on Bonus Role & Responsibilities: * Adhere to all safety/housekeeping requirements within a manufacturing setting. * Responsible for operating production equipment, including troubleshooting and making the necessary adjustments to ensure product and quality specifications are met. * Recording of production data and other results in the manner required. * Apply basic maintenance skills to help service equipment. * Expected to take an active role in all plant safety and continuous improvement initiatives as required by supervision. * Adaptable to scheduling requirements including shiftwork, assignment of overtime, working weekends, etc. where applicable. Qualifications & Requirements: * Able to work in a manufacturing setting in a safe manner and follow all plant safety and housekeeping rules. * Ability to learn to operate and troubleshoot plant equipment. * Ability to interpret verbal and written work instructions. * Ability to apply basic computer skills required for data entry and reporting. * Proficiency at taking measurements as needed to verify product is within specifications. * Possess basic maintenance skills, including familiarity with common hand tools and how to properly use them (Hammer, wrench, screwdrivers, pliers, putty knife, etc.). * Effective teamwork and communication skills needed with all co-workers. * Maintain regular and predictable attendance. Hourly Salary: $24.02 Rate of pay may be adjusted based on the qualifications and experience of the candidate. USG employees enjoy a number of benefit options for themselves and their families. These include two medical insurance options, as well as vision and dental coverage. The cost of these optional programs varies based on coverage level - employees generally pay 25% of the monthly premium cost, USG pays the rest. These coverage options are offered on the first day of employment with no waiting period. Additionally, USG employees enjoy both a 401(k) Investment Plan with company match and a pension plan. Beyond these main features, employees may also choose from a number of additional programs like life insurance, accident insurance, legal insurance, even pet insurance, just to name a few. USG also offers Quarterly (hourly) / Annual (salary) bonus potential for all employees based on performance metrics tied to safety, quality, and productivity. USG also provides employees with paid time off and paid holidays. Since 1902, Chicago-based USG has been a leader in producing innovative, award-winning products and systems to build everything from major commercial developments and residential housing to home improvements. USG's employees are committed to the highest levels of customer satisfaction and quality in everything we do. Our steadfast commitment to the company's core business values - innovation, quality, integrity, service, diversity, efficiency and safety - have helped us become the company we are today. EOE including disability/veteran

Pay Rate: $35.72/hr Centuri companies consider several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Who We Are Centuri Group is a strategic infrastructure services company with over 110 years of history and a bright future. Through our seven primary operating companies- Canyon, Linetec, National, Neuco, NPL, NPL Canada, and Riggs Distler- we partner with regulated utilities to build and maintain the energy network that powers millions of homes and businesses across the U.S. and Canada. Guided by our values and unwavering commitment to serve as long term partners to customers and communities, Centuri's more than 12,000 employees enable our customers to deliver electricity and natural gas safely and reliably. We also know that sustainability and inclusivity are core to our success, and are committed to delivering on both. As an Equipment Operator, after your paid training, you will operate equipment to safely move earth, equipment, tools, and materials to and from job sites. Reporting to the crew Foreman and as a member of your crew team, you will be asked to assist with general labor. What You'll Do * Safely operate heavy equipment such as: skid steers, backhoe, trencher, paver, dozer, milling saw, road grater, hydro-excavator, track hoe and more * Load and unload equipment and materials * Maintain daily pre-shift vehicle and equipment inspections * Perform regular maintenance and cleaning on assigned vehicles and equipment * Maintain all industry-required Operator Qualifications * Perform other tasks as requested by leadership What You'll Have * High School diploma or equivalent * Prior experience safely operating equipment in close proximity to workers and underground utilities What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training: natural gas distribution, utility excavation, safety * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Minneapolis

Who We Are Quality Work. Quality Results. Bay West stands at the forefront of the environmental consulting and remediation sector. Our dedication to safety, innovation, and our skilled team has driven us for over fifty years, delivering top-tier environmental consulting, industrial, and emergency response services. At Bay West, you'll be driven to innovate and make a real impact on environmental issues, all while advancing your career in a dynamic and supportive environment. This Opportunity Bay West is seeking an Equipment Operator to join our team! In this role, you'll operate specialized equipment, conduct hazardous waste cleanup, and provide top-tier service to our clients. You'll have opportunities for career growth and the chance to work in dynamic environments across various job sites! Your Key Responsibilities Travel to job sites and operate vacuum trucks, roll off trucks and other company equipment and vehicles Accurately preform pre-trip and post trip, and report deficiencies daily Label and manifest shipments in accordance with DOT regulations and company policies Interact with customers and provide superior customer service during all activities Maintain all required certifications required by DOT and OSHA and company safety programs Maintain and protect keep all equipment in excellent condition Perform any other tasks assigned to support and improve the overall team operations Operate and troubleshoot routinely used tools and equipment Conduct hazardous waste operations and clean-up Develop summaries, generate photographic logs, and input field work documentation Actively participate on the Emergency Response (ER) team - one week of being on-call 24/7 every six to eight weeks needed Who You Are Required Qualifications High school diploma or GED or 5 - 7 years of related experience, or equivalent combination of education and experience Valid Commercial Driver's License Class B or A required Tanker and HAZMAT endorsement helpful, but will be provided to the right candidate Active 40-hour HAZWOPER Certificate helpful, but will be provided to the right candidate TWIC card helpful, but will be provided to the right candidate Basic computer skills, such as using Microsoft Office products, communicating through email, etc. Ability to travel as needed Occasional weekend work required Possess or have access to reliable means of transportation on a 24-hour basis Experience operating construction equipment, like an excavator, loader, and/or skid steer helpful Able to work at heights and confined spaces Frequent lifting, carrying, or exertion of objects up to 25 pounds; occasionally up to 50 pounds Able to perform repetitive movements, including movements of digits, hands, wrists, and arms Physical Requirements Repetitive motions: frequent standing, walking, lifting, carrying, bending, and grasping Frequently lift 25 lbs. over an 8-hour period, and occasionally up to 50 lbs. for less than one hour Frequent exposure to non-hazardous and hazardous work environments including contaminated air, soil, dust, fumes, smoke and other toxins Ability to work outside in varying conditions, such as high heat, high humidity and extreme cold in remote locations. Ability to read and in

Founded in 2009 and headquartered in Downers Grove, IL we are a world-class contract manufacturer producing wholesome baked goods, snacks and packaged foods for many of the world's leading food companies. As one of the largest and fastest growing food co-manufacturing companies in the US, we are the proud owner and operator of over 35 facilities globally. Our nearly 10,000 employee-strong organization is leading the way and setting new standards for quality, safety, flexibility and efficiency while feeding families around the globe. Hearthside's exceptional growth stems from its ability to address real-world problems for customers of all shapes and sizes, and by our resolute commitment to our belief that there are no great companies without great culture. Our culture of personal empowerment enables growth, learning, and continuous improvement every day! We are steadfast in our ambition to be the indispensable and most trusted partner to our customers and need your help to do it! Join Hearthside and enjoy a competitive package, outstanding benefits and a diverse work environment. Who We Are: With over 11,000 employees at over 40 facilities across US & Europe, Hearthside Food Solutions is one of the fastest growing food companies and the industry's largest contract manufacturer. Our secret to success? Our people. We know an investment in our people is an investment in our company. We strive to understand our team members and support them however we can. By empowering employees through skill development and career advancement opportunities, we emphasize a culture of continuous improvement - both for the business and our people. We want team members that will support us in owning safety together - speaking up when they see a problem. When we focus on our people and safety, it ensures we all are driving better performance as well as on time delivery to our customers! What We Want to Give You: We offer a competitive wage and wide array of benefits including: • health/dental/vision insurance • flex spending accounts • short & long-term disability • paid holidays and vacation • bonus opportunities (referral, production, etc.). Job Summary: The Machine Operator performs set-ups, makes minor adjustments and operates packaging equipment. Identifies acceptable or unacceptable product quality per customer requirements. Performs wash and changeover of equipment. Machine Operators will need to be reliable and able to work with Good Manufacturing Practices (GMP's) at all times. Job Duties and Responsibilities: * Performs accurate set ups on equipment in preparation for particular product runs. * Operates equipment and adjusts as necessary to ensure equipment is operating correctly and meeting quality specifications. * Inspects and tests packages, and documents results to ensure equipment is operating correctly and meeting quality specifications. * Stages and checks required materials for quick and accurate change overs in production. * Completes and assembles all required documentation associated with the position. * Maintains works area in a clean and organized manner. * Performs all other duties as assigned. Minimum Qualifications: * High school diploma or equivalent is preferred. * Must be 18 years of age. * Must be knowledgeable in GMPs and the HACCP program or willing to learn. * Sufficient math skills to calculate quantities of material required for orders being run. * Good organizational and communication skills in order to prioritize work and communicate changes to line workers. * Must have the ability to handle small tools. * Must have the ability to understand and follow all safety policies and procedures. * Ability to read and write in English preferred. Work Environment and Physical Requirements: * Manufacturing environment - exposure to a variety of machines, noise levels, and varying temperatures. * Depending on which location, our environments can be very warm or refrigerated. * Team environment - must be able to work well with others and communicate in a respectful and professional manner. * Ability to stand up to 80% of the time scheduled * Ability to lift 40 lbs. unassisted and 40-75 lbs. assisted. * Must be able to work necessary overtime based on staffing needs and customer demand, as well as across shifts. Equal Opportunity Employer. If you need assistance applying, please contact Human Resources. Hearthside is an Equal Opportunity Employer.

ABOUT THE ORGANIZATION Sun Chemical, a member of the DIC Group, is a leading producer of packaging and graphic solutions, color and display technologies, functional products, electronic materials, and products for the automotive and healthcare industries. Together with DIC, Sun Chemical is continuously working to promote and develop sustainable solutions to exceed customer expectations and better the world around us. With combined annual sales of more than $8.5 billion and 22,000+ employees worldwide, the DIC Group companies support a diverse collection of global customers. Sun Chemical Corporation is a subsidiary of Sun Chemical Group Coöperatief U.A., the Netherlands, and is headquartered in Parsippany, New Jersey, U.S.A. For more information, please visit our website at ******************* or connect with us on LinkedIn or Twitter Title: Production Operator Location: Minneapolis, MN Pay: Based on experience Shift: 7:30am - 3:30pm, Monday- Friday (1st shift) Job Overview: In this role your primary responsibility is to produce high quality Inks for our customers. There are many machines used in the production process. You will be responsible for learning all of the processes and equipment. Your key role will be to use our PLC driven Human Machine Interface (HMI) equipment to produce high quality ink via batch tickets. The key to your success will be to produce the best quality product, on-time and practicing safety as a top priority. Essential Job Functions: Review batch tickets - read, understand and follow Provide samples to lab Pack product into designated containers; labeling containers Report near miss incidents and improvement opportunities Equipment cleaning, plant cleaning, waste disposal Forklift operation Understand SAP inventory Tub washer Gather and weigh ingredients. (scale operation) Stock rotation / minimization of partial containers Ingredient traceability Operate and trouble shoot mixing equipment Combine ingredients in designated sequence Training others Preliminary quality checks

Why you will enjoy working with Diamond: Competitive weekly pay Great health benefits include Health, Dental and Vision Insurance, HSA and FSA options, a 401(k) Retirement Savings Plan, a 529 CollegeSavings Plan, and Life Benefits Employer contributions to an HSA A close-knit team environment Monthly staff appreciation drawings, quarterly staff lunches and annual holiday events Paid time off and holidays to promote a work-life balance A clean and safe working manufacturing environment Temperature and humidity-controlled environment Casual dress code, free company shirts Paid meal and rest breaks Referral bonuses Comfort floor mats are provided by machines Volunteer overtime opportunities Job Summary: The Machine Operator is responsible for setting up the production line, collaborating with the production line team, reading and understanding job tickets, and ensuring all jobs are processed properly. First and Second shift positions are available. First Shift works Monday-Friday; 6:00am-2:00pm. Second Shift works Monday-Thursday; 1:45pm-11:45pm. Essential Duties and Responsibilities: Reads, understands, and accurately follows Job Ticket Instructions, completes job ticket paperwork and obtains proper approvals. Sets up and adjust layouts to match data proofs, diagnose and troubleshoot errors and start up and shut down the production line; if changes are made ensure proper approvals are performed. Check machine for proper working order and make adjustments if machine is not functioning correctly; call Maintenance if needed Verify job duties with production assistants; provide verbal instructions to tasks that needs to be done differently, ensure understanding of expectations Ensure the product meets customer specifications and perform quality checks as needed Communicate efficiently and effectively with teams and completes end of shift production reports. Other duties as assigned Requirements High school Diploma or equivalent Ability to pass background check and drug screening Sufficient computer skills to adjust machine according to product Ability to follow and communicate written and verbal instructions Understands job database software Ability to navigate through PC screens and menus Understanding of the delivery system equipment including: belts, timing, sensors, vacuums, and shingling Ability to lift, push, pull up to 50 lbs. regularly throughout shift Inserter Operator or a Folder Gluer experience is a plus Ability to remain in a stationary position and move about on a concrete floor for 100% of shift Ability to push, lift and pull up to 30 lbs. repetitively during shift Ability to move and position self to operate on, under and around machines Salary Description $20-$28

From big benefits to small, we take care of our associates! After 30 days of employment, you will be eligible for a benefits package that includes medical, dental, life, disability and business travel insurance, flexible spending accounts, EAP, stock purchases and vacation/sick days/parental leave. We also offer a 401(k) plan after three months of employment. Associates are vested in the RPM Pension plan after completing five years of service. Rust-Oleum offers 9 paid holidays and one floating holiday per year. You are also eligible to earn three weeks of vacation on an annualized basis. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Operators are responsible for the safe and efficient operation of plant equipment and performing site work based on accepted company procedures. Duties will include overseeing the loading and unloading of materials, monitoring inventory levels, testing material, conducting routine inspections, and ensuring compliance with safety regulations. This role requires a combination of technical expertise, problem-solving skills, and a commitment to upholding operational standards to achieve operational targets. #ZR ESSENTIAL FUNCTIONS Comply with Eco Material Technologies Safety Policies and Procedures Promote safe work habits to help create a zero-injury safety culture Attends regular safety meeting and follows all safety guidelines as required Maintain communication with utility Monitor and record levels of fly ash in silos and place orders as needed. Pulls samples of fly ash from loads and silos for testing and performs required tests Loads trucks, rail cars or barges with fly ash directly from the silo Unloads trucks, rail cars, or other deliver system to fill fly ash silos Weighs trucks and rail cars and records the information in relevant operating system or production sheet and creates tickets for billing Operates all loading equipment for loading trucks and/or rail cars including: water truck, dump truck, vacuum truck, or forklift on site when required Operate production equipment including start up and shut down Assists in the disposal operation where required Performs maintenance on grounds, equipment and facilities as directed Responsible for all paperwork and reports as required Regular attendance, timeliness, and scheduling flexibility Report any safety, quality of equipment maintenance items to Supervisor Assist with maintenance repairs and projects Other duties as assigned KNOWLEDGE, SKILLS AND ABILITIES Responds promptly to customer needs Follows established policies and procedures Demonstrates accuracy and thoroughness Strong verbal communication skills for conveying instructions, reporting issues, and collaborating with coworkers and supervisors Ability to read and comprehend simple instructions Manages time effectively and meets productivity standards Observes safety and security procedures including using equipment and materials properly and following all safety absolutes Capacity to deal with problems and troubleshoot equipment malfunctions Works well with others, follows instructions from supervisors and coordinates tasks with coworkers to achieve project goals Consistently punctual and reliable Ability and willingness to work rotating on-call shifts, weekends, holidays, and overtime Ability to adapt to changing job site conditions, equipment requirements, and project priorities EDUCATION AND/OR EXPERIENCE The employee should have the following: High School Diploma or equivalent and training or certification in relevant skill or trade 1 - 2 years' experience in a relevant field ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: Be exposed to sounds or noise levels that maybe uncomfortable Withstand exposure to temperature extremes inside or out Prolong standing or sitting in stationary position Required to occasionally climb or balance and stoop, kneel, crouch or crawl Complete repetitive movements Bend and/or twist Must be able to ascend/descend stairs or ladders Lift/move/transport items up to 50 pounds Ability to move or traverse about the facilities Ability to work around dust, chemicals, and other substances, and in various environmental conditions Wear all required personal protective equipment (hearing, vision and hardhat protection) This is not necessarily an all-inclusive list of job-related responsibilities, duties, skills, efforts, requirements or working conditions. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities or may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship.

Your Role: Operate a food packing production line at a Feed My Starving Children (FMSC) site. Maintain production area cleanliness, and uphold workplace and food safety compliance. Complete assigned production tasks within a specified production schedule. Check for quality of finished product and prepare for shipment. Pay, Schedule, & Benefits: The anticipated starting pay range is $17 - $18/hr. This is a full-time, non-exempt hourly position. Work schedule is Monday-Friday 8:00am-4:30pm. Attend required meetings and trainings. Benefits include health insurance, 401(k) with employer match, PTO, FSA, dental, vision, and more. Detailed benefit information can be found here: *************************************************** What You'll Do: Perform routine and repetitive packaging of food product, equipment operations, and other tasks of the production line. Keep machine equipment processes moving. Troubleshoot as needed. Understand and maintain the production schedule. Uphold food safety, food quality, and workplace safety policies and procedures. Ensure compliance with all SSOPs, GMPs, and personal hygiene related to food products. Complete daily start-up activities. Prepare equipment, ingredients, and materials for packing process. Complete end-of-shift clean-up of equipment and production space. Complete accurate records of production output, scrap, material usage, and labor hours. Prepare food product for shipment, including repackaging as needed, boxing, and palletizing. Check for quality of finished product. Identify, inspect, and report product quality issues. Follow equipment standard operating procedures. Operate powered industrial forklift and pallet jack to organize, load and unload ingredients, and finished product as needed (training provided). Perform other duties as assigned. Your Qualifications: Commitment to support FMSC's Christian mission and goals. Must be 18 years of age or older. Minimum of a high school diploma or GED. 1 year of work experience in a manufacturing or warehouse environment preferred. Machine operation, production or warehouse experience desired. Self-starter; can work independently and can follow processes, procedures, and directions. Takes initiative to identify and solve problems. Responsible and able to use good judgment and discretion. Thrives in a team setting. Able to pitch in, fill in gaps, remain flexible, ask for help, and share responsibilities. Physical Requirements: Able to exert yourself physically for an 8 hour shift. Able to walk and stand on concrete floor in intervals up to 4 hours. Able to use arms and hands to reach overhead, forward, and side to side. Able to frequently climb stairs and work from various heights. Able to push, pull, lift up to 30-50 lbs. repeatedly, bend, twist, and use hand tools such as utility knives. Able to operate a forklift, scissor lift, and pallet jack. Work Environment: Able to tolerate consistent exposure to soy (an allergen). Able to tolerate frequent exposure to variable temperatures and loud noise in a manufacturing setting. Frequently required to wear provided personal protective equipment (ex. Earplugs, eye glasses, Nitrile gloves, hairnets). Your Team: Work location is Eagan, MN. Reports to Assistant Production Manager. FMSC is an equal opportunity employer, and we consider all qualified applicants for employment without regard to race, color, religion, sex (including sexual orientation and gender identity), pregnancy, citizenship, national origin, age, disability, military service, veteran status, genetic information, union membership, or any other status protected by law. See the federal Equal Employment Opportunity Commission's “Know Your Rights” poster. Learn more about diversity, equity, and inclusion at FMSC - ************************************* FMSC is an E-Verify employer. See the federal “E-Verify Participation” poster, and the “Right to Work” poster for more information.

We're looking for a skilled machine operator to join the team! Your main job is loading polyethyene resin and unloading completed parts from the rotational molding oven. While doing this, you will also be responsible for checking the schedule and the oven programs for accuracy, and ensuring the quality of the parts that you produce before transferring them to the Secondary department for trimming. What We Offer: Medical, dental, & vision insurance with competitive premiums 401(k) Up to $5,250 of educational assistance per calendar year PTO + 9 paid company holidays This job is for you if: Enjoy working in a team environment. Like seeing the evidence of your work each day. Want to be part of a rapidly growing company. Key Responsibilities: Set up and operate the molding machine in a safe and efficient manner. Work as a team to assemble and dismantle molds. Conduct mold changes using overhead cranes and rigging. Transfer plastic resin into ovens for heating and into molds for forming. Understand and follow all safety programs/processes. Follow and track the production schedule. Qualifications: Ability to work effectively on a team - required. Ability to maintain a high attention to detail - required. Ability to lift up to and including 50 lbs. - required. Ability to stand on your feet in a hot manufacturing environment for at least 10 hours a day. - required At least 1 year of manufacturing or construction experience - preferred. Highschool diploma or equivalent GED - preferred. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasional, represents 1 to 33% or 1-2 hours of an 8-hour work day. Frequently, represents 34 to 66% or 2 1/2 to 5 1/2 hours of an 8-hour work day. Regularly, represents 67 to 100% or 6 to 8 hours of an 8-hour work day. While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision and peripheral vision. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to wet and/or humid conditions and moving mechanical parts. AAP/EEO Statement: Tank Holding provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, creed, ancestry, sexual or affectional orientation, marital or veteran status, color, religion, sex, national origin, age, disability, genetics, status with regard to public assistance or any characteristic protected under federal, state or local law. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Production Operators are responsible for moving product from machine, cleaning it, assembling as required and stacking finished parts or goods Additional Information All your information will be kept confidential according to EEO guidelines.

Reporting to the Production Manager, Production Supervisor or designate; the Robot Operator is responsible for operating and maintaining the robot welder. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Load parts in appropriate fixturing and run robot welder while maintaining established productivity rates & quality requirements. * Examine welded sections for defects and perform necessary rework of bad welds. * Reference prints and work instructions to determine the appropriate materials, tools, resources, and procedures for effectively completing processes. * Perform in-process quality checks to verify parts meet customer specifications using test fixturing, rulers, micrometers, calipers, etc. * Perform minor machine adjustments & preventative maintenance. * Analyze and resolves work problems, or assist in solving work problems. * Work in a safe manner by wearing proper PPE & following all safety procedures/polices. * Comply with ISO 9001 standards and practices. * Maintain a clean and efficient workspace. * Assist in training other welders. COMPETENCIES: * Strong math skills, visual inspection, and computer literate * Strong planning, organizing, and time management skills. Able to work collaboratively and/or independently. * Must be able to interpret and work from prints, work orders, specifications, and verbal direction MINIMUM QUALIFICATIONS: * 1-2 year welding certificate from college or technical school AND/OR * 1-2 years prior welding experience in a manufacturing environment OTHER REQUIREMENTS: * Good manual dexterity and ability to use a variety of torches, hand tools, and power tools safely * May be required to pass weld test Base Pay Range: $20-$25 per hour Compensation Disclosure: At Phillips and Temro Industries, base pay is one part of our total compensation package and is determined within a range. This provides the opportunity to progress as you grow and develop within a role. The base pay range for this role is listed above. Your base pay will depend on your skills, education, qualifications, experience, and location. The final salary offer will be based on these criteria and may differ based on the candidate's experience and qualifications and other job-related reasons. If you have any questions about the salary range, the compensation structure, or benefits offered feel free to reach out to *********************** Benefits Available to Full-Time Employees: * Health insurance, dental, and vision (cost-share) * HSA/FSA * STD and LTD (company provided) * Basic Life and AD&D (company provided) * Voluntary Supplemental Life * EAP (company provided) * Voluntary Accident, Critical Illness and Hospital Indemnity * 401K plan with employer match * Paid time off (PTO) and holidays * Volunteer hours * Annual bonus based on company performance * Tuition Reimbursement * Paid Parental Leave * Safety shoe and safety glasses reimbursement