Operator Jobs in London, OH

Waverly, OH • Set up and operate assembly equipment as assigned. • Follow work instructions as outlined in Standard Operation Sheet (SOS) • Job Element Sheet (JES), and/or packing instructions for all assigned operations. • Load/unload parts in/out of welders, dies, trunions, and/or assembly fixtures. • Operate equipment that welds, stamps, presses, crimps, stakes, and/or rivets together parts and/or sub-assemblies. • Perform manual assembly, welding, and tapping operations as required. • Ensure quality and quantities of parts produced to meet required quality specifications and production rates. • Follow all company policies and procedures. • Perform light, routine maintenance on assigned equipment. • Fill out all necessary paperwork associated with the job including but not limited to, some or all of the following: start-up checklist, pre-shift inspection sheet, labor tickets, scrap records, downtime tracking sheets, quality assurance checks, and product identification tags. • Any other reasonable request made by management. • Travel, including overnight travel, as required from time to time. • Work overtime before and/or after normal shifts and/or on weekends as assigned. • Be present at work, ready to work at the assigned time for every scheduled or voluntarily accepted work day. • Contribute to a safe, clean and comfortable work environment by applying the principles of the 5S discipline (simplify, separate, sanitize, standardize and support) • Comply fully with applicable federal, state, and local laws. WORK EXPERIENCE • No minimum experience is required. ESSENTIAL FUNCTIONS • To perform this job successfully, an individual must be able to perform all essential functions satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. LANGUAGE • Ability to read and demonstrate understanding of documents such as safety rules, work instructions, maintenance instructions, employee handbook, policies, and procedures. MATHEMATICS • Ability to apply basic math skills such as adding, subtracting, multiplying and dividing whole numbers, fractions and decimals; ability to round numbers and to calculate averages. REASONING/JUDGMENT • Ability to apply common sense understanding and sound judgment to carry out detailed written or oral instructions. • Ability to deal with problems involving a few concrete variables in standardized situations. INTERPERSONAL SKILLS • Must be able to interact effectively with employees at all levels in a team environment. PHYSICAL ABILITY • Ability to use hands to grip, finger, handle and/or feel parts. • Ability to wear required personal protective equipment, including, but not limited to gloves, protective sleeves, safety glasses with side shields, and steel-toed shoes. • Ability to use hands, arms and wrists to work continuously throughout shift. • Ability to use tools which vibrate, such as grinders, drills, sanders, etc. continuously throughout shift. • Ability to stand, walk, sit, talk, hear, and write. • Ability to repeatedly lift, reach, push, pull, carry, bend, twist, and stoop with parts, boxes, or other objects weighing up to 40 pounds within allotted times. • Ability to use close vision, depth perception and adjust focus to visually inspect part quality to standards. • Ability to work overtime for shifts of up to 12 hours per day, seven days per week. • Ability to work in hot or cold environments. • Ability to work in loud environments requiring hearing protection. Benefits • Medical • Dental • Vision • 401K • Short-Term Disability • Competitive Wages Starting Pay $16.50/hr Shift Premium $1.00 - 2nd Shift $1.50 - 3rd Shift Raise Frequency 3 Mo / 12 Mo / 24 Mo PandoLogic. Category:Manufacturing, Keywords:Assembler, Location:Chillicothe, OH-45601

Pellet Mill Operator, Starting at $15.50 hr - $16.00 hr Full-Time, Monday - Friday, 2nd shift Earn 1 week of vacation after 90 days of employment Come and experience the difference with R+L Carriers Energy Pellets of America is currently hiring for a Pellet Mill Equipment Operator at our Wilmington, OH Pellet Shop. Jumpstart your career and expand your professional portfolio at Energy Pellets of America. As the Pellet Mill Operator, you will run the pellet mill, the bagging machine, the shrink wrap equipment, as well as maintain and clean the equipment as needed. Successful candidates for this position must possess a good work ethic, maintain a good attendance record, and work well with others as part of a team. Qualifications: Machine operating experience Computer experience Previous forklift experience Ability to read and count Ability to communicate with the manufacturer of the equipment Ability to lift up to 75lbs Ability to stand on concrete for extended periods of time Able to read a micrometer Must be able to bend, lift and stoop without difficulty Strong attention to detail to ensure accuracy Proactive, self-motivated, and strong ability to multitask Click here ****************************

Looking for an exciting career? Want to make a career change? R. J. Corman is seeking safe, energetic, fast paced people who enjoy working outside, understand the thrill of accomplishment and hard work to join our Emergency Response Team. Work consists of clearing derailments for our railroad customers across the United States. Perks of the job: Opportunity to travel extensively and work outside Operate heavy or specialized equipment (i.e. Sideboom, Track Loader, Excavator, Vac Truck, Grapple Truck, etc.) Guaranteed 40 hours per week with high potential for overtime Company provided training to obtain CDL-A Hotel and travel expenses paid for Company provided PPE On the job training provided and advancement opportunities Why work for R. J. Corman? Safety is our #1 priority Competitive wages Benefits start day one - health, dental, vision Paid time off - accrual starts day one 401k with generous company match Company paid life insurance 8 company paid holidays Employee assistance program Employee referral program Job Requirements: Key Responsibilities: Transport, operate, and service heavy equipment used in clearing railroad derailments Perform laborer/groundsman duties as needed Practice safe working habits and ensure proper PPE is being used Safely drive, operate, and maintain CDL-A required vehicles and equipment Follow DOT regulations, ensuring proper permits and driving regulations are followed Be comfortable working outside in all weather conditions Communicate with team and supervisor throughout the job process What does it take to be a Heavy Equipment Operator/Laborer for R. J. Corman? Mobility to participate in frequent travel and be on call 24/7 to respond to emergencies Must live within 45 minutes of the R. J. Corman shop Must pass background, drug screen, and physical capacity test Possess current CDL-A and DOT medical card (preferred) Requires lifting of up to 100lbs in performance of duties Love working outside! FMCSA Clearinghouse registration will be required for CDL candidates in order to provide electronic consent for pre-employment queries. Registration can be completed at https://clearinghouse.fmcsa.dot.gov/register Click the link below for step-by-step registration instruction. https://clearinghouse.fmcsa.dot.gov/Resource/Index/Registration-Driver-Instructions R.J Corman Railroad is an Equal Employment Opportunity (EEO) and Affirmative Action employer that is committed to a safe and drug free work place. R.J Corman performs pre-employment criminal background checks and substance abuse testing which includes a urine drug test to detect the presence of illegal drugs. We appreciate your cooperation in keeping R.J Corman a safe and drug free company. Join our team today! Apply online at rjcorman.com/careers

Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. Hiring immediately. We are growing and have an excellent opportunity for a skilled heavy equipment operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities Equipment operator on residential and commercial job sites. Follow OSHA and Roto-Rooter safety procedures. Work with a crew to complete excavation work. Interact with customers as needed. Maintain excavation equipment. Work in confined spaces and open trenches. Requirements Construction experience (residential and commercial). Load, unload and secure equipment on transport trailers according to guidelines. Current CDL Class A license Trenchless water, sewer & gas experience is a plus. Work a flexible schedule that may include nights and weekends. Complete jobs within specified timelines. Benefits At Roto-Rooter, we believe our most significant investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: Medical insurance with a Prescription Drug Card Accident and Critical Illness Insurance Dental Insurance Vision Insurance Paid Vacation Paid Training Life Insurance Matching 401K Retirement Savings Plan Tuition Reimbursement Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout nearly 100 years in business, we've found that military training and structure are an excellent fit for our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND37 #LI-CP1 #LI-ONSITE Not ready to apply? Connect with us for general consideration.

Are you organized, accountable, and have always gone the extra mile to make sure things are done right? Imagine the impact those skills can have in ensuring the accuracy of millions of healthcare tests, every month. If you share our passion for strengthening physician care, please apply for the Specimen Accessioner position! Labcorp is seeking a dedicated and motivated individual to join their Specimen Accessioning/PROPEL team in Dublin, OH. The Specimen Accessioner will be responsible for performing sample sorting and processing in a fast-paced, high-throughput environment according to established standard operating procedures. Schedule: for this position is Monday-Friday, 10:30pm to 7:00am, Rotating weekends and holidays, Daily overtime as needed. Benefits: Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. For more detailed information, please click here. Job Duties/Responsibilities: * Introduce and prepare biological specimens to the laboratory to ensure accurate processing * Open specimens and pour off into secondary containers to prepare for analysis and testing * Verify patient demographic information matches the test requisition form submitted * Data entry of patient information into the computer system for tracking purposes * Meet key production metrics and quality measures to ensure timely and accurate results * Unpack and route specimens to their respective staging areas * Pack and ship specimens to proper testing facilities when required * Properly prepare and store excess specimen samples * Resolve and document any problem specimens Handle and dispose of medical and chemical waste * Comply with applicable environmental health and safety policies and procedures * Operate automated instrumentation under supervision if necessary Requirements: * High School Diploma or equivalent * No relevant experience is required * Previous medical or production experience is preferred * Proficient computer and typing skills * Must pass standardized color vision test * Comfortable handling human biological specimens including blood, urine and tissue samples * Ability to lift up to 30lbs, work in protective equipment and sit/stand for long periods of time * Strong eye hand coordination in order to accurately identify specimens by touch and sight * Ability to work both independently and in a team environment * High level of attention to detail with the ability to problem solve * Strong communication skills; both written and verbal * Ability to work overtime when needed Labcorp is proud to be an Equal Opportunity Employer: As an EOE/AA employer, Labcorp strives for diversity and inclusion in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications of the individual and do not discriminate based upon race, religion, color, national origin, gender (including pregnancy or other medical conditions/needs), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. We encourage all to apply If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site or contact us at Labcorp Accessibility. For more information about how we collect and store your personal data, please see our Privacy Statement.

Fenix Parts is one of the nations leading recyclers and resellers of original equipment manufacturer (OEM) automotive products. The Fenix companies have been in business more than 25 years and currently operate from 27 locations throughout the U.S. Our primary business is auto recycling, which is the recovery and resale of OEM parts, components and systems reclaimed from damaged, totaled or low value vehicles. Our organization is facing rapid growth & We're are looking for exceptional individuals to join our growing team. If you take pride in your work and are committed to supporting operational needs, this is the position for you! Job Snapshot: * Will be responsible for supporting operations by moving vehicles and equipment throughout yard, monitoring lot inventory and vehicle check-in, and responding to production, warehousing, and transportation needs * Unloading haulers and staging cars for inventory department * Supporting with dismantling by bringing un-processed cars to dismantlers and placing vehicles back in the yard * Crushing vehicles that have reached their useful life * Loading scrap haulers with crushed cars that are ready for final disposal * Maintaining inventory locations and integrity of vehicles * Health benefit and 401k options Minimum Requirements: * High School diploma or equivalent * Automotive background and heavy equipment experience * Previous heavy equipment operating, general maintenance and understanding of mechanical equipment * Basic computer skills Transitioning military professionals are encouraged to apply! Be part of something big. Join our amazing team, today!! We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran, or other protected status. Fenix Parts adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with Fenix policies which are in place to safeguard our employees and customers.

Pay Range: $34 + based on experience Centuri companies consider several factors when extending an offer, including but not limited to, the role and responsibilities, a candidate's work experience, education, training and skills, and geographic location. Who We Are At NPL, part of The Centuri Organization, our employees are part of an established team working to support America's natural gas utility and energy infrastructure. Working at NPL means you are joining a company with over 50 years of experience, long-standing customer relationships, and one that is deeply integrated into our host communities. Come grow your career with us and be a part of something bigger. As an experienced Equipment Operator, after paid training, you will put your skills to work - safety operating equipment to move earth, tools and materials to and from job sites. Reporting to a seasoned Foreman, you will join a crew to get the job done right. We believe in the power of teamwork, and all crew members are expected to assist with general labor as needed. What You'll Do * Safely operate heavy equipment such as: skid steers, backhoe, trencher, paver, dozer, milling saw, road grater, hydro-excavator, track hoe and more * Load and unload equipment and materials * Maintain daily pre-shift vehicle and equipment inspections * Perform regular maintenance and cleaning on assigned vehicles and equipment * Maintain all industry-required Operator Qualifications * Perform other tasks as requested by leadership What You'll Have * High School diploma or equivalent * Valid Driver's License * 1+ year experience safely operating equipment in close proximity to workers and underground utilities What You'll Get * Join the Largest Natural Gas Distribution Contractor in the United States * Weekly Payroll * Paid, on-the-job training: natural gas distribution, utility excavation, safety * Employee Assistance program benefit * Health Insurance Plan benefit * Retirement Plan benefit Work Environment * Work sites are outdoors in potentially extreme weather conditions * All worksite safety instructions are written and spoken in English; must be fluent in English * Work includes prolonged and repeated: lifting (including overhead, up to 50lbs); standing; climbing; kneeling; reaching and feeling; crouching and crawling * Work is performed within the "red zone" of heavy equipment * Working safely requires quick/accurate hand-eye coordination and the ability to work in a constant state of alertness and safe manner Legal Stuff * Pass pre-employment, random, post-accident, and reasonable suspicion drug screens * Provide valid US work authorization documents for E-Verify * Satisfactory results of pre-employment background check results * Valid driver's license with clean driving record * Pre-employment medical fit-for-duty test; hold/obtain DOT medical card * Join and maintain Union membership Diversity, Equity & Inclusion Commitment This job description is subject to change at any time. It reflects management's assignment of essential functions, and does not exclude or restrict the tasks that may be assigned. Centuri and its subsidiary companies will provide equal employment opportunities to all applicants without regard to an applicant's race, color, religion, sex, gender, genetic information, national origin, age, veteran status, disability, or any other status protected by federal, state or local law. Centuri will provide reasonable accommodations to allow an applicant to participate in the hiring process (e.g., accommodations for a test or job interview) if so requested. Centuri is a Department of Transportation regulated employer. Certain safety-sensitive positions are covered under the DOT Drug and Alcohol Testing Regulations, 49 CFR Part 40. It is important to note that marijuana remains a drug listed in Schedule I of the Controlled Substances Act. It remains unacceptable for any safety-sensitive employee subject to drug testing under the company's Drug Free Workplace Policy to use or test positive for marijuana. Nearest Major Market: Columbus

This position is at our Prairie Plant in Wilmington. The hours for this position are Sunday-Thursday from 10pm to 6am Pay Range: $21.50-$24.00 per hour. Core Responsibilities: Operates forklift to safely unload inbound shipments of finished goods Maintains paperwork for all loads Verifies that inbound shipments are damage-free and match packing list exactly Maintains clean and orderly conditions in warehouse and loading areas using workplace organization methods (i.e. 6S) Participates in continuous improvement initiatives Follow all safety and equipment handling procedures to ensure a safe working environment Pull all rail kitting components to be shipped to offsite supplier Load trucks for outbound shipments of components Receive and unload the trucks of incoming rail kits from supplier Assist in maintaining accurate inventory of incoming rail kits Performs additional duties/tasks as assigned by supervision/management Qualifications: High School Diploma or GED required A minimum of 5 years of experience operating material handling equipment Forklift Certification - either current or in prior work experience Strong decision making, analytical skills and proven ability to work cross-functionally Strong attention to detail, reading, comprehension and good communication skills Must be self-directed and motivated and able to multi-task in fast-paced, 24/7 manufacturing environment Computer skills preferred, to include; basic input of information into ERP system on receiving and shipping process Work schedule flexibility, with advance notice, to accommodate needs of the business Education Requirements: • High school diploma or equivalent required.

Heavy Equipment Operator Independence Excavating is looking for an experienced and ambitious Heavy Equipment Operators to join our team! Who is IX? From breaking ground to the finished project, our team has been laying the groundwork for excellence on heavy civil construction and demolition projects for over 65 years. We combine innovations of industry with decades of successfully completed projects, proving we are a value-added partner from the ground up! Over six decades, Independence Excavating has established a team of construction professionals that sets us apart from other contractors. To learn more, visit our website: *********************** What do we believe in? PEOPLE: Provide a safe, family-oriented environment. Commitment to integrity. Protect our most valuable assets. PERFORMANCE: Always deliver the highest quality. Find solutions. Provide value to our partners. COMMUNITY: Positively impact the communities we serve. Give back. Leave the world a better place than we found it. A typical day looks like: * Performing daily safety maintenance and checks * Ensuring heavy equipment is safely and securely stored * Informing and advising management for maintenance or major repairs on equipment * Responding to signals and directions by staff and work in coordination with them Do you have what it takes? * High School Diploma or equivalent is required * 3-5 years' experience running heavy equipment * GPS experience * Establish and maintain effective working relationships with employees, other agencies and the public * Must be able to perform a try-out running the equipment during the interview process * Must be able to pass a drug screen * Position functions in the field (100%), in all types of weather conditions * Current Union Member in good status with the International Union of Operating Engineers, or a willingness to become a member Independence Excavating, Inc. is an Equal Opportunity Employer, and we value workplace diversity and do not discriminate against any employee or applicant because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

The Loader Operator will contribute to the production team to ensure goals are met safely and efficiently while conforming to company policies. Process vehicles in a safe manner to produce core & scrap products, enable the customers to pull parts, and satisfy environmental requirements. This position focuses primarily on Front Loader operation and various material handling duties. Operation of a Front Loader, Crusher, Fork Lift or Skid Steer: Move vehicles, cores, scrap, and other material safely through the yard. Ensure that loads are positioned and placed securely. Use various tool attachments to segregate and dismantle light passenger vehicles. Maintenance of a Front Loader, Crusher, Fork Lift or Skid Steer: Perform the pre-operations check and other inspections/cleaning as prescribed in the Certification course. Preferred Qualifications Previous experience operating heavy equipment. Experience in automotive repair or dismantling. Experience with automotive parts and/or retail customers Experience with tools and machinery. Bilingual in English & Spanish. Physical Activities Required to Perform Essential Functions Standing, walking, bending, climbing and stretching are required outside in the weather for extended periods during the shift. The ability to sit for 6-8 hours per day in 2-3 hour intervals. Manual dexterity to handle tools and the ability to move 50 pounds are regularly required to perform routine functions. Good hand-eye coordination and motor skills sufficient to safely operate fork lift equipment in an active work area. Regular and peripheral vision sufficient to safely operate fork lift equipment in an active work area and perform job functions as described above. Hearing must be sufficient to safely operate fork lift equipment in an active work area. Job Conditions Exposure on a regular basis to outdoor weather conditions. Periodic exposure to minimal chemical hazards. PLEASE NOTE: The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required. All U.S. applicants must be 18 years of age or older and all Canada applicants must be 16 years of age or older. Radius Recycling participates in e-verify for all U.S. new hires. An offer of U.S. employment by Radius Recycling or any of its subsidiaries is contingent on the satisfactory completion of a post-offer drug screen and background check. All new hires must review and sign an Arbitration Agreement. This applies to all U.S. non-union employees. As an Equal Opportunity Employer, Radius Recycling does not discriminate on the basis of race, religion, color, sex, marital status, disability status, national origin or ancestry, veteran status, age, prior industrial injury, sexual orientation, genetic information, or any other protected status under local, state or federal law.

Job Responsibilities * Safe operation of a variety of heavy construction vehicles and equipment. * Responsible for daily inspection of equipment and performing basic repair and maintenance as needed to ensure the safe working condition of all equipment. * Read and understand various types of load charts. * Maintain a clean work environment. Qualifications/ Requirements * Minimum of 3 years of experience as a heavy equipment operator. * Knowledge of operation and maintenance of a variety of heavy construction vehicles and equipment. * Knowledge of principles and practices of routine and preventative maintenance of heavy construction vehicles and equipment. * Knowledge of principles and procedures of documentation and record-keeping including operators' books. * Knowledge of occupational hazards and standard safety practices. * Knowledge of safe load securing practices/rigging experience is a plus. * Understanding of hand signals. * State licensing may be required depending upon the state. * NCCER certification is a plus. Cianbro is an employee-owned, tobacco-free, equal opportunity employer, we do not discriminate based on marital status, race, color, creed, gender, sex, religion, national origin, gender identity, age, veteran status, union affiliation, physical or mental disability, citizenship status, sexual orientation, genetic information, or other legally protected status.

Job Details Geiger - Gahanna, OH Full TimeDescription The Materials Equipment Operator I is responsible for safely operating heavy machinery, such as forklifts, loaders, skid steers, and other heavy equipment to load, unload, and transport various materials like asphalt, concretes, limestone, topsoil, and other products within a materials yard. This role ensures effective inventory management, compliance with safety regulations, and the upkeep of a clean and organized yard. Essential Functions: Transport, stack, and organize various materials such as aggregates, building supplies, and landscaping products to designated areas. Monitor and track material inventory to ensure proper stock levels and report discrepancies or shortages. Operates hand and power tools of all types, including air hammers, earth tampers, cement mixers, measuring equipment, handheld power saws and compaction equipment. The ability to operate a multitude of construction equipment used in crushing and materials processing, including, but not limited to, excavators, bulldozers, compaction equipment, skid steer, directional drills and front- end loaders to support a variety of operations. Identifies and observes proper construction hand signals etiquette to efficiently and safely operate machines. Loads a multitude of materials Operates heavy equipment in a safe and efficient manner to minimize the risk of injury or property damage. The ability to follow the field supervisor's direction by utilizing a multitude of machines to complete general tasks. Knowledge in compaction testing with general knowledge of a multitude of materials. Ability to read and understand measurements in increments, inches and feet. Clearly communicates with field supervisors to discuss duties, construction problems and improvements methods. Reads and comply with safety plans, work permits, maintenance instructions, training manuals, MSDS's, warning tags, traffic signs and procedure manuals. Serves as a backup to other positions if directed by management. Performs daily safety and maintenance checks. Ensures adherence to safe work practices and procedures. Qualifications Competencies or Experience Requirements Class A - CDL License with Tanker Endorsement preferred. Two (2) to five (5) years of experience preferred Crushing and Materials processing preferred Excellent problem-solving skills Strong understanding of crushing and material processes Ability to read and interpret blueprints and site plans Working in various weather conditions Ensure the work area is clean and safe Report any safety hazards or equipment malfunctions Ability to work independently and as part of a team Knowledge of environmental regulations Ability to work in areas of uneven terrain Good communication skills Basic mechanical skills for equipment maintenance Exemplify a strong work ethic Reliable and punctual Possess and maintain a valid driver's license Ability to follow project instructions and meet deadlines Ability to work flexible hours, including weekends as needed Able to successfully pass all required training Provide input on improving operational efficiency Physical Requirements Sitting Standing or walking Lifting or carrying 50+lbs. on a frequent basis Pushing or pulling Reaching overhead, at or below shoulder level Foot or leg controls on machinery or equipment (controls include, but are not limited to, pedals, buttons, levers, and cranks Driving passenger vehicles or equipment Stooping, Crouching, Kneeling, Crawling Climbing ramps, stairs, ladders or scaffolding Speaking to convey detailed spoken instructions to other workers accurately, loudly, or quickly Hearing-the ability to hear, understand, and distinguish speech and/or other sounds (e.g., machinery alarms, horns, or other alarm systems). Far visual acuity - clarity of vision at 20 feet or more Peripheral vision - observing an area that can be seen up and down or to the right or left while eyes are fixed on a given point Education Requirements High School diploma or general education degree (GED) Safety Strict adherence to safety requirements and procedures as outlined in the Manual of Safety Practices and Procedures. Travel Travel to job sites is required as needed. Additional Considerations The Zemba Companies' culture and values are part of what makes the company successful and a great place to work. Candidates will be considered in terms of their consistency with culture and values. The Zemba Companies is a rapidly growing company; flexibility is essential as we grow and develop. The successful candidate must be comfortable in a fast-paced work environment with many crucial deadlines. Benefits The Zemba Companies benefit package includes medical insurance, dental insurance, vision insurance, life insurance and retirement savings plan upon completion of length of employment requirements. Disclaimer The above statements are intended to describe the general nature and level of work being performed. They are not to be construed as an exhaustive list of all responsibilities, duties and skills required. All team members may be required to perform duties outside of their normal responsibilities from time to time, as needed. Equal Employer Opportunity Statement The Zemba Companies provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Valley Asphalt is seeking individuals who excel at multitasking and are looking for a hands-on environment. We are currently hiring full-time Asphalt Plant/Loader Operators in the Dayton, Ohio area. Ideal candidates would have some experience within asphalt plant operations, maintenance background, and a proven safety track record. Successful candidates would be willing to learn, eagerness to take initiative, and hard working. Don't have the experience yet? Don't worry! We are willing to train and develop the right candidates! Loader Operator Responsibilities: Perform daily maintenance and safety checks on equipment Previous knowledge of OSHA / MSHA regulations Ability to operate other pieces of equipment if needed Comply with all company policies and procedures Loader Operator Desired Qualifications: Minimum of high school diploma / GED Valid driver's license Working knowledge of an aggregate plant and aggregate mining operations CAT and John Deere front end loader experience Minimum of three (3) experience operating front end loaders Loader Operator Skills: Excellent verbal, written, telephone, and communication skills Understanding of computerized controls and electronics Able to meet deadlines or production based goals consistently. Loader Operator Working Conditions: Able to work in confined spaces. Ability to climb 70-80 ft. Able to lift and carry 50lbs and work in inclement weather Flexible schedule with ability to work overtime, and weekends if needed EOE/M/F/Disabled/Veteran/DFSP IND123

Valley Asphalt is seeking individuals who excel at multitasking and are looking for a hands-on environment. We are currently hiring full-time Asphalt Plant/Loader Operators in the Dayton, Ohio area. Ideal candidates would have some experience within asphalt plant operations, maintenance background, and a proven safety track record. Successful candidates would be willing to learn, eagerness to take initiative, and hard working. Don't have the experience yet? Don't worry! We are willing to train and develop the right candidates! Loader Operator Responsibilities: Perform daily maintenance and safety checks on equipment Previous knowledge of OSHA / MSHA regulations Ability to operate other pieces of equipment if needed Comply with all company policies and procedures Loader Operator Desired Qualifications: Minimum of high school diploma / GED Valid driver's license Working knowledge of an aggregate plant and aggregate mining operations CAT and John Deere front end loader experience Minimum of three (3) experience operating front end loaders Loader Operator Skills: Excellent verbal, written, telephone, and communication skills Understanding of computerized controls and electronics Able to meet deadlines or production based goals consistently. Loader Operator Working Conditions: Able to work in confined spaces. Ability to climb 70-80 ft. Able to lift and carry 50lbs and work in inclement weather Flexible schedule with ability to work overtime, and weekends if needed EOE/M/F/Disabled/Veteran/DFSP IND123

11:00 AM- 7:00 PM M-F Heavy Equipment Operators are responsible for safely operating various heavy equipment that perform the spreading and compaction of construction and demolition, and/or commercial and residential waste disposed of at the landfill or post collection facilities. Equipment operators are exposed to unpleasant odors and sights, and weather elements. Responsibilities of Position: Perform efficient safe operation of bulldozers, graders, excavators, backhoes, front end loaders, wheel loaders, off road dump trucks, and other equipment. Safely move material in a manner which does not endanger personnel or equipment. Conduct pre-trip/post trip inspections on equipment and complete necessary forms. Perform routine maintenance on equipment, (i.e., lubricating, fueling, and cleaning equipment). Operate various equipment for general site preparation, landscaping, snow removal, and/or related assignments. Continuously monitor the equipment to ensure proper operation and minimal down time. Cleans waste from equipment body and wheels or tracks. Professional interaction with internal and external customers. Proficiently completes all operating and labor tasks assigned. Clean waste from equipment body and wheels throughout the day. Operate equipment in a safe manner in compliance with all local, state, and federal regulations and company policies. Other duties as assigned. Skills & Abilities Needed for Position: Ability to perform physical requirements of the job (prolonged physical exertions, including sitting, standing, reaching, bending, lifting, pushing, pulling, and climbing). Also, ability to withstand “bumpy” ride on equipment. Must be able to complete training on other landfill equipment, as necessary. Must be dependable, a self-starter, and able to identify and perform daily operational requirements. Ability to work in conditions with exposure to weather elements. Good verbal communication skills to be able to communicate effectively and professionally with others. Must pass a written and operational test to be certified to operate equipment. Must be able to read and speak the English language well enough to communicate, understand, and respond to questions, directions, and safety training. Physical Requirements in a Regular workday: Frequently lifting/carrying a max of 10lbs. Occasionally lifting/carrying a max of 20lbs. Continuously pushing/pulling a max of 10lbs. Frequently pushing/pulling a max of 20lbs. Occasionally Stooping/kneeling/crouching/crawling. Occasionally Climbing and/or balancing. Working in continuous areas of dust, odors, mist, gases, other airborne matter. Working in continuous mechanical, electrical and/or other hazards. Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas. Exposure to residential and commercial waste. Ability to work flexible hours; overtime, weekends, and/or holidays. Must be available for 24-hour emergency calls. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish a contract for employment and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status or disability status.

The Olen Corporation and Area Aggregates, one of the largest construction aggregates producers in the Midwest, has been a leader in the industry for over 50 years. With multiple locations serving Central, Northeast, and Northwest Ohio, Olen is dedicated to providing top-quality aggregate products, including natural sand, gravel, and limestone, to a diverse range of customers. As an ODOT 1069 prequalified aggregates supplier, Olen sets the standard for quality and service in the industry. Producing over 8 million tons of construction materials each year, Olen is a top thirty-five national producer of quality construction aggregates. Since 1986, Olen has partnered with Kokosing to be one of their top suppliers of construction materials. Committed to excellence, Olen is focused on delivering exceptional customer service while being responsible stewards of the environment and respectful neighbors in the communities we serve. Job Description: Operator must have the ability to operate a variety of equipment in a safe and efficient manner. Working Mon-Fri between the hours of 6 PM and 6 AM. Essential Functions and Responsibilities: Responsible for operating track excavators, back hoes, dozers, loaders, rollers, forklifts, and other pieces of equipment. Perform other routine duties as directed by Foreman. Education and Experience: Experience with operating procedures of multiple types of equipment. High school diploma or GED equivalent. Knowledge, Skills and Abilities: Must have basic knowledge of proper operating procedures of multiple types of equipment. Must be capable of operating the assigned machine and any other related equipment in a safe manner. Must be able to do a competent inspection of the equipment. Must be able to apply and retain information provided in crew meetings. Must be able to understand directions/instructions on methods/process to do work. Must be able to maintain high level of awareness for a busy project work environment. Benefits: Offering a competitive compensation and benefits package including medical, life insurance paid time off and a 401K plan. Olen offers a competitive compensation and benefits package including medical, dental, vision, company paid life, and disability insurance. We also provide competitive incentives to eligible team members, like paid time off and 401K plus match to reward our team members for staying committed to our customers and keeping safety a priority. Olen is an equal employment opportunity employer. The company does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected class.

Job description: Lift Truck Operator -

Are you organized, accountable, and have always gone the extra mile to make sure things are done right? Imagine the impact those skills can have in ensuring the accuracy of millions of healthcare tests, every month. If you share our passion for strengthening physician care, please apply for the Specimen Accessioner position! Labcorp is seeking a dedicated and motivated individual to join their Specimen Accessioning/PROPEL team in Dublin, OH. The Specimen Accessioner will be responsible for performing sample sorting and processing in a fast-paced, high-throughput environment according to established standard operating procedures. **Schedule** : for this position is Monday-Friday, 10:30pm to 7:00am, Rotating weekends and holidays, Daily overtime as needed. **Benefits:** Employees regularly scheduled to work 20 or more hours per week are eligible for comprehensive benefits including: Medical, Dental, Vision, Life, STD/LTD, 401(k), Paid Time Off (PTO) or Flexible Time Off (FTO), Tuition Reimbursement and Employee Stock Purchase Plan. Casual, PRN & Part Time employees regularly scheduled to work less than 20 hours are eligible to participate in the 401(k) Plan only. ** ** For more detailed information, please ** ** click here (************************************************************** **.** **Job** **Duties/Responsibilities:** + Introduce and prepare biological specimens to the laboratory to ensure accurate processing + Open specimens and pour off into secondary containers to prepare for analysis and testing + Verify patient demographic information matches the test requisition form submitted + Data entry of patient information into the computer system for tracking purposes + Meet key production metrics and quality measures to ensure timely and accurate results + Unpack and route specimens to their respective staging areas + Pack and ship specimens to proper testing facilities when required + Properly prepare and store excess specimen samples + Resolve and document any problem specimens Handle and dispose of medical and chemical waste + Comply with applicable environmental health and safety policies and procedures + Operate automated instrumentation under supervision if necessary **Requirements:** + High School Diploma or equivalent + No relevant experience is required + Previous medical or production experience is preferred + Proficient computer and typing skills + Must pass standardized color vision test + Comfortable handling human biological specimens including blood, urine and tissue samples + Ability to lift up to 30lbs, work in protective equipment and sit/stand for long periods of time + Strong eye hand coordination in order to accurately identify specimens by touch and sight + Ability to work both independently and in a team environment + High level of attention to detail with the ability to problem solve + Strong communication skills; both written and verbal + Ability to work overtime when needed **Labcorp is proud to be an Equal Opportunity Employer:** As an EOE/AA employer, Labcorp strives for diversity and inclusion in the workforce and does not tolerate harassment or discrimination of any kind. We make employment decisions based on the needs of our business and the qualifications of the individual and do not discriminate based upon race, religion, color, national origin, gender (including pregnancy or other medical conditions/needs), family or parental status, marital, civil union or domestic partnership status, sexual orientation, gender identity, gender expression, personal appearance, age, veteran status, disability, genetic information, or any other legally protected characteristic. Additionally, all qualified applicants with arrest or conviction records will be considered for employment in accordance with applicable law. **We encourage all to apply** If you are an individual with a disability who needs assistance using our online tools to search and apply for jobs, or needs an accommodation, please visit our accessibility site (**************************************************** or contact us at Labcorp Accessibility (Disability_*****************) . For more information about how we collect and store your personal data, please see our Privacy Statement (************************************************* .

Fenix Parts is one of the nations leading recyclers and resellers of original equipment manufacturer (OEM) automotive products. The Fenix companies have been in business more than 25 years and currently operate from 27 locations throughout the U.S. Our primary business is auto recycling, which is the recovery and resale of OEM parts, components and systems reclaimed from damaged, totaled or low value vehicles. Our organization is facing rapid growth & We're are looking for exceptional individuals to join our growing team. If you take pride in your work and are committed to supporting operational needs, this is the position for you! Job Snapshot: Will be responsible for supporting operations by moving vehicles and equipment throughout yard, monitoring lot inventory and vehicle check-in, and responding to production, warehousing, and transportation needs Unloading haulers and staging cars for inventory department Supporting with dismantling by bringing un-processed cars to dismantlers and placing vehicles back in the yard Crushing vehicles that have reached their useful life Loading scrap haulers with crushed cars that are ready for final disposal Maintaining inventory locations and integrity of vehicles Health benefit and 401k options Minimum Requirements: High School diploma or equivalent Automotive background and heavy equipment experience Previous heavy equipment operating, general maintenance and understanding of mechanical equipment Basic computer skills Transitioning military professionals are encouraged to apply! Be part of something big. Join our amazing team, today!! We are proud to be an Equal Opportunity/Affirmative Action employer. Qualified applicants will receive consideration for employment without regard to race, sex, disability, veteran, or other protected status. Fenix Parts adheres to CDC, OSHA and state and local requirements regarding COVID safety. All employees and visitors are expected to comply with Fenix policies which are in place to safeguard our employees and customers.