Operator Jobs in Delaware

NEXPERA leads the way in sulfuric acid and potassium hydroxide regeneration, offering a comprehensive range of products and services that optimize processes, minimize environmental impact, and allow our partners to focus on their core operations. With the industry's largest facility network, we ensure unmatched reliability and drive innovation across the industrial landscape. In addition, we provide an unmatched array of sulfur-based chemicals and related services to a diverse set of industries. BENEFITS Nexpera's comprehensive benefits package includes paid time off policies, as well as health, dental and vision insurance. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. POSITION PURPOSE The Chemical Operator will monitor and operate equipment and facilities, including field equipment, ensuring quality and conformance with standard operating procedures. Additional responsibilities include always maintaining safety standards and initiating and following emergency procedures when necessary. The Operator will perform basic maintenance repair and upkeep on area equipment. Job tasks are performed in control room, lab areas, and throughout various operation areas of the site. The site operates a process safety management-covered process that produces sulfuric acid in multiple concentrations. Product is shipped in rail cars, tank trucks and portable totes. PRIMARY DUTIES / RESPONSIBILITIES (but not limited to): ● Start up and shut down (normal and emergency) plant systems and components. ● Operate, monitor and control plant systems; visually inspect, monitor equipment and process conditions. ● Prepares equipment for maintenance work by isolating, clearing and locking out. ● Reviews, follows and, if qualified, revises detailed process operating procedures, maintenance procedures and safety procedures. ● Troubleshoots equipment to restore to normal operation. ● Analyzes charts and logs to identify potential or actual problems. ● Identifies system problems to stabilize plant to normal conditions. ● Trains new operators in the area, reinforcing safety and environmental principles. ● Performs loading and unloading of railcars, tank trucks and totes. ● Perform laboratory analysis of products. ● Clerical duties as required. ● Shipping duties as required. ● Operate mobile equipment including manlifts, fork trucks, yard-dog and trackmobile. ● Participate/Lead various site teams. ● Recognize abnormalities in a High Hazard work area and promptly initiate action to secure the safety of all personnel along with protection of the environment and local community. Qualifications In order to be qualified for this role, the following is required: ● High School Diploma/GED equivalent ● Minimum of 2 years' experience in an industrial or manufacturing environment ● Ability to navigate the tools of Microsoft Office Suite (Outlook, Word, Excel, etc.) and Google Suite (Sheets, Docs, etc.) and learn new computer systems and software applications ● Willing and able to work 12-hour rotating shifts, including overtime, nights, weekends, holidays and short notice call-in if required ● Willing and able to lift up to 50 lbs ● Willing and able to work in a High Hazard environment; outdoors, indoors, elevated heights and confined spaces ● Willing and able to wear required PPE (personal protective equipment) such as steel toe shoes, hardhat, protective eyewear, face shields, respirator, chemical acid suit, etc. ● Willing and able to climb stairs, ladders; stand, walk, stoop, bend, kneel, crawl; visual acuity for close work; able to reach overhead; able to hear and respond to alarms ● Willing and able to acquire a boiler's license in the state of Ohio ● Current and valid driver's license - willing and able to obtain powered industrial truck (i.e., fork trucks and manlifts) certification ● Willing and able to operate a trackmobile to move railcars on-site and a yard-dog to move product trailers as needed on the site. ● Experience maintaining, repairing and troubleshooting industrial equipment/machinery The following skill sets are preferred by the site: ● High Hazard/Chemical operations experience ● Experience reading and interpreting Schematics, Pipe & Instrumentation Diagrams, Procedures, Manufactures' Literature, Safety Requirements, General Instructions; ability to learn and detect process deviations ● Experience operating fork trucks ● Experience with SAP or equivalent Manufacturing Operations software Successful candidates must be able to perform the essential functions of the job with or without accommodation. Additional information We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. This job description is a general description of essential job functions. It is not intended as an employment contract, nor is it intended to describe all duties someone in this position may perform. All employees are expected to perform tasks as assigned by supervisory personnel, regardless of job title or routine job duties. 2 Standard JD Template Revised Date: August 2019

Immediately Hiring! Production Operator in Delaware, OH Starting Pay $23.97 Hiring All Shift: 1st Shift, 2nd, 3rd! Additional shift differential of .75 Cents for 2nd shift and .85 Cents for 3rd shift per hour. Must be able to work any shifts and overtime as needed. Text “PPG” to *************** to quickly apply to this position and schedule an interview. As a Production Operator, you will be a crucial part of our operations, ensuring that a quality product is available to our customers when they need them. Your work will directly affect people's lives! Primary Responsibilities The position involves blending, measuring, and producing raw materials to manufacture industrial coatings. Prepare materials and products for packaging and shipment to customers. You will work in a production environment with the appropriate safety procedures in place. Operate forklift trucks. Qualifications Ability to lift up to 50 pounds on a consistent basis throughout the day. Experience in a manufacturing or warehouse environment is preferred. Ability to work any shifts and overtime as needed. PPG pay ranges and benefits can vary by location which allows us to compensate employees competitively in different geographic markets. PPG considers several factors in making compensation decisions including, but not limited to, skill sets, experience and training, qualifications and education, licensure and certifications, and other organizational needs. Other incentives may apply. Our employee benefits programs are designed to support the health and well-being of our employees. Any insurance coverages and benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents.

At DuPont, our purpose is to empower the world with essential innovations to thrive. We work on things that matter. Whether it's providing clean water to more than a billion people on the planet, producing materials that are essential in everyday technology devices from smartphones to electric vehicles, or protecting workers around the world. Discover the many reasons the world's most talented people are choosing to work at DuPont. Why Join Us | DuPont Careers CHEMICAL PROCESS OPERATOR ROLE DEFINITION DuPont currently has openings for Chemical Operators in the CMP Technologies division, located at our Newark-Bellevue Delaware site. RESPONSIBILITIES DESCRIPTION DuPont CMP Technologies business is the global market leader in consumables for chemical mechanical planarization or polishing (CMP). The CMP step in semiconductor fabrication creates a planar surface on a semiconductor wafer through the interaction of a pad and slurry on a polishing tool. A smooth planar surface enables the lithography step to be more effective, circuits to be made smaller and more layers of circuitry to be built. Our portfolio offers a full range of hard and soft polishing pads and slurries designed to meet unique performance needs for different CMP applications and nodes. The position requires the flexibility and willingness to work one of the following shift options, based on available openings at time of offer: 12 Hour Shifts - Overnights 8 Hour Shifts - Evenings Flexibility to train on day hours is a plus. Your key responsibilities will be/what you'll do: Operates automatic and manual chemical process equipment of varying complexity in accordance w/ operating procedures, including programmable, logic control devices. Responsible for complex liquid / chemical batch manufacturing, which also requires familiarity of a variety of production machines that serve as either internal suppliers or customers to the chemical operator. Equipment includes but not limited to: mixers, agitators, pumps, differential pressure cells & gauges, valves, automated and manual delivery systems. Responsible to off load and package intermediate and final products, as well as waste. Ensure safety guidelines/rules are strictly followed; verify that preventive measures are in place before operating; utilize SDS regularly; wear required PPE & PPC, up to and including full-face respirators and in accordance w/ site and area procedures; utilize extreme caution for process safety due to chemicals used; conduct monthly safety audits; recognize safety concerns and escalate via processes; participate in SHINE (5S PROGRAM) program. Utilizing strong attention to detail and multi-tasking, responsible for quality control of product, which includes frequent in-process and final product quality testing. Respond to out-of-control points by either following established action plans for process disruptions or adjusting equipment as appropriate for equipment disruptions. Required to identify and complete preventive maintenance at a basic level. Handle first-line troubleshooting such as equipment malfunctions, computer program issues, setting adjustments; involving appropriate other experts as needed. Skills & Qualifications Good judgment, attention to detail, and manual dexterity Strong multi-tasking skills Good communication, interpersonal, organizational, numerical, and analytical skills Good written skills, proficient computer skills, and ability to work with MS Office tools A self-starter who can identify, prioritize and accomplish multiple tasks with an ability to work with minimal supervision; ability to take general direction and complete assignments/tasks Demonstrated mechanical aptitude Demonstrated track record of problem solving using a fundamental approach Must be able to work overtime when required, per business need This role is located in Newark, DE and may require less than 5% of travel JOB QUALIFICATIONS Requirements: Education & Work Requirements: A minimum of a high school diploma or GED A minimum of 2 years work experience Preferred Requirements: Experience in chemical process or chemical handling is strongly preferred. Physical Requirements: Ability to wear personal protective equipment (PPE) & quality protective equipment Ability to wear personal protective devices including a full-face respirator. While performing the duties of this job, various physical requirements include climbing stairs, bending, squatting, pushing, pulling and performing overhead work. Stand for extended periods of time while working at machines Lifting > up to 10 lbs. frequently, lifting > 11 to 25 lbs. occasionally, lifting > 26 to 50 lbs. occasionally Use of mobile equipment Some work requires manual dexterity & repetitive movements of the upper extremities Responsible for ensuring, promoting, and working in a clean environment with varying degrees of temperatures, humidity and Quality Protective Equipment Join our Talent Community to stay connected with us! On May 22, 2024, we announced a plan to separate our Electronics and Water businesses in a tax-free manner to its shareholders. On January 15, 2025, we announced that we are targeting November 1, 2025, for the completion of the intended separation of the Electronics business (the “Intended Electronics Separation”)*. We also announced that we would retain the Water business. We are committed to ensuring a smooth and successful separation process for the Future Electronics business. We look forward to welcoming new talent interested in contributing to the continued success and growth of our evolving organization. (1) The separation transactions are subject to satisfaction of customary conditions, including final approval by DuPont's Board of Directors, receipt of tax opinion from counsel, the filing and effectiveness of Form 10 registration statements with the U.S. Securities and Exchange Commission, applicable regulatory approvals, and satisfactory completion of financing. For further discussion of risks, uncertainties and assumptions that could impact the achievement, expected timing and intended benefits of the separation transactions, see DuPont's announcement. DuPont is an equal opportunity employer. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. If you need a reasonable accommodation to search or apply for a position, please visit our Accessibility Page for Contact Information. DuPont offers a comprehensive pay and benefits package. To learn more visit the Compensation and Benefits page.

Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. Hiring immediately. We are growing and have an excellent opportunity for a skilled heavy equipment operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities Equipment operator on residential and commercial job sites. Follow OSHA and Roto-Rooter safety procedures. Work with a crew to complete excavation work. Interact with customers as needed. Maintain excavation equipment. Work in confined spaces and open trenches. Requirements Construction experience (residential and commercial). Load, unload and secure equipment on transport trailers according to guidelines. Current CDL Class A license Trenchless water, sewer & gas experience is a plus. Work a flexible schedule that may include nights and weekends. Complete jobs within specified timelines. Benefits At Roto-Rooter, we believe our most significant investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: Medical insurance with a Prescription Drug Card Accident and Critical Illness Insurance Dental Insurance Vision Insurance Paid Vacation Paid Training Life Insurance Matching 401K Retirement Savings Plan Tuition Reimbursement Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout nearly 100 years in business, we've found that military training and structure are an excellent fit for our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND32 #LI-NM1 #LI-ONSITE Not ready to apply? Connect with us for general consideration.

ONBOARDING YOU TO THE COMPANY At Nexans our global vision is to electrify the future. At Distribution & Usages buisness group this means providing reliable cabling systems and smart energy solutions, including power accessories, to make buildings and power networks more efficient, more people oriented and more sustainable. Nexans recognizes the differences that make each employee valuable and unique. Diversity is key to performance and to our global ambition to lead the world in the energy transition towards a sustainable planet. This we know from experience. All differences are appreciated and respected at Nexans. As a result, you will be an active part of a multinational organization where we cultivate the culture of sharing your unique point of view. This is why we encourage diversity in our recruitment - Bring yours to Nexans, it is welcome! Operator Milling (M/F/D) Responsibilities: * Independently set up and program the CNC milling machines with the machine responsibility * Operating the CNC milling machines * Carrying out test runs * Documenting order data and monitoring the production process * Checking the products for dimensions and quality in accordance with the relevant specifications * Preventing maintenance on the milling machine * Reading of technical drawing Qualifications: * Completed training as a metal cutting mechanic, CNC specialist or comparable qualification * Professional experience in the metal industry * Flexibility and willingness to work in a 3-shift system * PC skills We offer: Attractive long-term prospects with a lot of personal responsibility and room for your own ideas in a global, continuously developing company. The working style at Nexans is characterized by short information paths and uncomplicated, cooperative interaction. Further training and opportunities for advancement are just as much a matter of course for us as an attractive salary and a pleasant working atmosphere. OUR GROWTH CULTURE Among our employees we share the same values- we are pioneers of the energy transition, dedicated to deliver to the highest standards of performance, united to achieve our ambitious goal. At the individual level our growth culture is built on trust and collaboration. We wish to welcome you as a valuable member of our team. To enable impact we believe in autonomy at the local level at the same time as we encourage knowledge sharing within our global engineering competence. REFERRAL REQUEST In case this is not the job for you, but perhaps you have a friend who would be a great match - please forward the job to them, thanks!

Reports To: Plant Manager Compensation: $19 - $22 hourly Seeking an Individual to perform various duties at an aggregate plant facility including equipment operation, welding, and other plant-related tasks. Must be dedicated, willing to learn and wanting to build a career while achieving the highest level of safety standards. This is an entry level equipment operator's position, and we will consider training the right individual. Benefits * Recession Resistant Industry * Consistent work, with a work/life balance * Overtime Opportunities * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision offered the first of the month following start date * Life Insurance Company Paid * Short-term / Long-term Disability Insurance Company Paid How to Get Started * STEP ONE: Complete our online application (linked here) * STEP TWO: Be prepared to speak with one of our Recruiters, as they'll be reaching out to you soon. * STEP THREE: Keep an eye on your texts and emails, we'll use this to send you additional details, questions, and information pertaining to our hiring interview and selection process. Get Hired: What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * DOT 5-Panel Drug Screen * Fit for Duty Baseline Physical * Paid Orientation * A great team to support you throughout your career with Summit Materials companies! Roles & Responsibilities * Operate equipment to assist with the daily production and operations of the plant. * Assist plant supervisor with the daily operations and upkeep of the plant. * Ability to inspect all areas of the plant to perform necessary maintenance, repairs and screen changes. * Perform welding and fabrication duties as needed. * Detect safety hazards and equipment malfunctions and respond accordingly. * Ability to follow directions. * Must be able to work evenings and weekends when necessary. * Strict adherence to safety requirements and procedures as outlined in MSHA policies and procedures manual, and OSHA guidelines. * Perform additional job duties as assigned. Ability, Skills & Knowledge * Experience preferred in large aggregate equipment including loader, haul truck, water truck, and skid steers. * Knowledge of welding and general mechanics preferred. * High school education or GED equivalent. * MSHA certification preferred. #INDKT Req #: 975 Nearest Major Market: Columbia Missouri

Job Posting Title Heavy Equipment Operator I, II Creek Turnpike Agency 978 OKLAHOMA TURNPIKE AUTHORITY Supervisory Organization Creek Maintenance Facility-Creek Maintenance Facility Job Posting End Date (Continuous if Blank) Note: Applications will be accepted until 11:59 PM on the day prior to the posting end date above. Estimated Appointment End Date (Continuous if Blank) Full/Part-Time Full time Job Type Regular Compensation Why join the Oklahoma Turnpike Authority? The Oklahoma Turnpike Authority (OTA) has been serving Oklahomans since 1947, managing and maintaining a modern, safe, and efficient turnpike system across the state. With a commitment to customer service and innovation, OTA plays a vital role in ensuring smooth and reliable travel for millions of motorists each year. As a part of our team, you'll have the opportunity to make a meaningful impact while working in a collaborative and supportive environment. OTA offers competitive pay, excellent benefits, and opportunities for growth, making it an excellent choice to build your career in public service. Join us at OTA and be a part of the team that keeps Oklahoma moving! Position Overview This is a full-time position located on the Creek Turnpike Basic Purpose Positions in this job family are responsible for operating power equipment and performing related tasks in the maintenance and repair of highways. Compensation Level I - $40,600 Level II - $47,100 Primary Duties and Responsibilities Operates equipment or heavy machinery such as trucks, tractors, road graders, dozers, front-end loaders, cranes, backhoes, paint machines, semi-trailers, snow removal equipment and other equipment as needed. Performs minor repairs and maintenance on equipment and facilities. Repairs failures in the roadway shoulders or bridge decks. Repairs and/or replaces signs, posts, guardrails and fences. Provides traffic control assistance using a stop/slow sign or flag to direct highway traffic. Applies herbicide to highway rights-of-way to control weeds and other unwanted vegetation. Remove debris including tires, animal carcasses, spilled items and other obstacles. Physical Demands and Work Environment While performing the duties of this job, the employees are frequently required to stand, walk and reach; and talk and hear. Routinely, employees are required to sit; to manipulate or feel objects, tools or controls; climb or balance; and stoop, kneel, crouch or crawl. Employees must regularly lift 80 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision and depth perception. Minimum Qualifications LEVEL I - Education and Experience requirements at this level are none. LEVEL II - Education and Experience requirements at this level consist of one year of experience in operating heavy equipment. Preferred Requirements, Special Skills or Knowledge Knowledge of the operation and servicing of equipment or heavy machinery used in highway construction and maintenance; of materials used in highway construction and maintenance; and of proper highway traffic control during maintenance operations. Ability is required to operate heavy equipment or machinery used in highway construction and maintenance; to use highway construction and maintenance materials; to follow instructions; and to communicate effectively. Persons appointed to the position must possess or obtain a commercial driver's license, class A, no later than five months from the date of appointment. Applicants must be willing and able to perform all job-related travel normally associated with this position; be willing to work hours other than on regular shifts during emergency situations; and possess a telephone in residence to receive emergency on-call duty messages. Benefits Highlights OTA is proud to provide a comprehensive benefits package designed to support eligible employees and their eligible dependents: Generous Annual Benefit Allowance: Up to $21,934 to help cover insurance premiums for employees and their families. Comprehensive Insurance Plans: A variety of options with no exclusions for pre-existing conditions. Flexible Spending Accounts (FSAs): Pre-tax savings for healthcare and dependent care expenses. Retirement Savings Plans: Pathfinder Defined Contribution Plan: Employer matches 6% of a minimum 4.5% employee contribution (up to 7% if the employee contributes 7%). OPERS Defined Benefit Plan: Available for reenrollment to employees enrolled prior to November 1, 2015. Paid Leave: 15 days annually during the first 1-5 years of service. 18 days annually for 5-10 years of service. 20 days annually for 10-20 years of service. 25 days annually for over 20 years of service. Sick leave: Accrued at 15 days per year. Paid Maternity leave for eligible employees. Holidays: Eleven paid holidays annually. Employee Discounts: Special rates with various vendors and companies. Longevity Payment: Monetary rewards beginning at two years of service to recognize dedicated tenure. Thrive: Empower Oklahoma State employees to improve & enhance their well-being. OTA is an Equal Opportunity Employer. Reasonable accommodation for individuals with disabilities may be provided upon request. Disclaimer This is intended as a summary of the primary responsibilities of and qualifications for this position. The job description is not intended as inclusive of all duties an individual in this position might be asked to perform or of all qualifications that may be required either now or in the future. All employees appointed to state service, whether initial hiring, transferring from one state agency to another state agency, or returning to state service following a break in service will be required to complete a twelve-month trial period in accordance with Civil Service and Human Capital Modernization Rule OAC 260:130-19-30. Equal Opportunity Employment The State of Oklahoma is an equal opportunity employer and does not discriminate on the basis of genetic information, race, religion, color, sex, age, national origin, or disability. Current active State of Oklahoma employees must apply for open positions internally through the Workday Jobs Hub.

Responsibilities Allan Myers is looking for a dedicated, hard-working equipment loader operator to join our team of professionals at our Dover Asphalt Plant. Learn and grow within our company; we promote from within and provide great benefits. This non-exempt position operates heavy construction equipment to perform various tasks on site. Responsible for safe operation of machines, maintenance, and upkeep of equipment. Responsibilities: Performs equipment maintenance duties such as cleaning, greasing and oiling machines. Adjusts hand levers and depresses pedals to operate equipment and control attachments such as blades, buckets, and swing booms. Discusses plans for the day's work with field manager and determines best method of getting assigned work done safely, accurately, and on time. Make judgments regarding the most efficient operations of equipment and attachments. Compliance with Allan Myers Polices including but not limited to. Equipment repair / maintenance procedures and Operator Safety Standards Safety, Safety, Safety! “Home Safe Tonight” and related policies Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications Minimum of 2 years of equipment operating experience required. Valid driver's license required. High School Diploma or equivalent (GED) a plus. Related work experience required. Overview Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law. We can recommend jobs specifically for you! Click here to get started.

Primary Purpose Operate conveyance equipment to move grain to and from storage. Setting up, controlling, adjusting and feeding grain into semi-automated machines and equipment. Unload and load trucks, shipping containers and rail cars with grain. Operate other equipment, use hand tools to maintain good housekeeping standards and assist with minor repairs. Computer understanding - run the scales and enter data. Day Shift Major Duties & Responsibilities * Operate conveyance equipment to move grain to and from storage. * Load grain for outbound shipment. * Housekeeping and assist with completion of minor repairs. * Operate grain drying equipment. * Receive information or instructions for performing work assignments. Qualifications * High School Diploma or GED. * 0 - 2 years' relevant experience. * Previous work-related skills. * Ability to lift over 50 lbs. * Must be able to climb up to 150 feet.

The City of Dover is currently seeking applicants for the position of Motor Equipment Operator I in the Sanitation Division of Public Works Department. The primary duties of this position is to perform labor in support of City operations within the Sanitation Division., which involve a variety of semi-skilled tasks associated with the collection and transportation of municipal solid waste. Job Responsibilities * Operate motor equipment to transport materials, tools, equipment, or personnel to job sites, load or haul dirt, or pick up debris from job sites. * Operate equipment such as trash/refuse pick up, snow removal, or other specialized operations * Complete job-related logs and forms * Overtime is required as needed * Ability to perform medium to heavy work lifting up to 75 pounds on a frequent basis Required Qualifications * High school diploma or GED is required * Minimum of six (6) months of related experience preferred * Valid Commercial Driver's License (CDL), or the ability to obtain a CDL permit within two (2) months and CDL license within six (6) months is required * Pass a Department of Transportation (DOT) physical associated with the CDL * Pre-employment drug and alcohol test. To view the entire job description, please visit, ************************************************ and click on DOE Union Employees Job Titles A criminal background investigation and driving record review will be required. Candidates may be given a job-related test during the interview. Compensation * Health, dental, and vision and group life insurance * 401a and 457 deferred compensation plans * Paid vacation and sick leave To Apply Submit the Following * City of Dover employment application (************************* Ethical conduct and honest behavior are our basic organizational values. Candidates will be instrumental in assisting to make Dover a place where people want to live through our motto - Dedication, Ownership, Vision, Excellence and Reliability City of Dover is an Equal Opportunity Employer. Hourly Rate: DOE Labor Grade 17 / $19.28 per hour (Based on Qualifications) Closing Date: Open Until Filled Download Application

The candidate should have a basic chemistry knowledge and computer skills. The position is set in a fast-paced start-up environment and will require the individual to work on a broad range of tasks. The Production Operator is responsible for performing daily tasks in the pharmaceutical pilot plant in accordance with cGMP regulations. The candidate needs to: Demonstrate the attention to details Ability to follow written procedures Work well on a team Be dependable Show commitment Be flexible Be positive Have good communication skills

Apply now " Company: Dentsply Sirona, Inc Dentsply Sirona is the world's largest manufacturer of professional dental products and technologies, with a 130-year history of innovation and service to the dental industry and patients worldwide. Dentsply Sirona develops, manufactures, and markets a comprehensive solutions offering including dental and oral health products as well as other consumable medical devices under a strong portfolio of world class brands. Dentsply Sirona's products provide innovative, high-quality and effective solutions to advance patient care and deliver better and safer dentistry. Dentsply Sirona's global headquarters is located in Charlotte, North Carolina. The company's shares are listed in the United States on NASDAQ under the symbol XRAY. Bringing out the best in people As advanced as dentistry is today, we are dedicated to making it even better. Our people have a passion for innovation and are committed to applying it to improve dental care. We live and breathe high performance, working as one global team, bringing out the best in each other for the benefit of dental patients, and the professionals who serve them. If you want to grow and develop as a part of a team that is shaping an industry, then we're looking for the best to join us. Working at Dentsply Sirona you are able to: Develop faster - with our commitment to the best professional development. Perform better - as part of a high-performance, empowering culture. Shape an industry - with a market leader that continues to drive innovation. Make a difference -by helping improve oral health worldwide. Chemical Operator I - Lucitone Digital Print - Dept. # 3746 - 1st Shift Job Summary: Perform a broad variety of manufacturing assignments/tasks related to operating a variety of manufacturing mixing equipment. Job Duties: * Responsible for closely following batch formulas used in the production of a variety of products. * Responsibilities include properly setting up equipment, weighing out various liquid and powder raw materials (may include converting US weights to METRIC weights), loading mixing equipment with liquids and powders, monitoring process controls and making adjustments and minor repairs to machines as necessary. * Monitors process and/or loading, unloading, cleaning or setting up of equipment. * Processes work orders on time and efficiently according to set standards. * Weighs raw materials, final products, etc. * Uses statistical process control, including automated data acquisition devices, to monitor quality. * Maintains cleanliness of equipment and work area. Participates in department 5S program. * Counts and records production units and labor hours. * Meet and exceed all quality standards set forth for the department and division. Accurately and neatly documents all quality documents. * Other duties as assigned Years and Type of Experience: * 6 months production experience Education: High School Diploma or GED preferred Key Required Skills, Knowledge and Capabilities: * Ability to read and interpret documents such as safety rules, standard operating and maintenance instructions, and procedure manuals. * Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, metric measurement and decimals. Ability to use a calculator, convert weights from US standards to METRIC standards and use of Statistical Processes is required. * Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Associate may be cross trained to perform other duties within the department as needed. * Required to participate in various EHS programs. All external will be required to pass a basic reading, writing & math test (15 minutes in length) on the day of their on-site interviews Dentsply Sirona is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in Dentsply Sirona. If you need assistance with completing the online application due to a disability, please send an accommodation request to **************************. Please be sure to include "Accommodation Request" in the subject. For California Residents: We may collect the following categories of personal information in connection with the submission of your resume or application materials to us for employment, and if hired, your employment with us: identifiers (e.g., name, address, email address, birthdate); personal records (e.g., telephone number, signature, education information, criminal background information, passport number and visa information); consumer characteristics (e.g., sex, marital status, veteran status, race, disability, sexual orientation); professional or employment information (e.g., resume, cover letter, employment history, background check forms, references, certifications, transcripts and languages spoken); and inferences from personal information collected (e.g., a profile reflecting abilities and aptitudes). The above categories of personal information are collected for the following business purposes: performing recruitment and hiring services; processing interactions and transactions (e.g., to comply with federal and state laws requiring us to maintain certain records, managing the workforce); and security (e.g., detecting security incidents, protecting against fraudulent or illegal activity). For additional details and questions, contact us at **************************

The Heavy Equipment Operator must have experience in operation of excavators, loaders, dozers or site dumps requires the ability and aptitude to operate heavy construction equipment Grading or utility experience required $25.00 - $35.00 per hour DXI Construction Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, DXI Construction Company complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities.

This role will function as part of a team to meet production goals. Essential Functions: * Set up and monitor all manufacturing parameters relating to the safe, efficient production of silicone extruded rubber products. * Adjust machine for proper extrusion and winder operation. * Measuring and gauging thickness of material by using micrometers and various measuring/quality control instruments to maintain consistent product performance. * Package extruded tape and case product per customer specifications. * Assure that a sufficient quantity of raw material base is available to meet daily production demands by recording all inventory material usage on work orders and within computer software system. * Perform scheduled housekeeping by removing product and supply debris from production area using a broom or shovel. * Perform and record all in-process inspection/testing relating to maintaining product traceability and run documentation. * Communicate with various departments such as quality, shipping, and value added relative to product quality issues and availability of material for further processing or shipping. * Perform cycle counting to ensure inventory accuracy. * Perform nonconforming material process including DMR's and hold tags. * Participate in the training of new employees. Qualifications: * High School Diploma or equivalent * 2 years previous extruding experience * Proficient computer skills * Experience with inventory systems * Basic math skills * Ability to use measuring tools such as micrometers * Ability to use lifting and moving devices * Basic mechanical aptitude

Master Heavy Machinery: Join Our Team as a Heavy Equipment Operator at Nick Falcone & Sons, Inc.! Job Title: Heavy Equipment Operators - Commercial Company Name: Nick Falcone & Sons, Inc Salary: Competitive based in experience Full Job Description Nick Falcone & Sons, Inc., a distinguished construction company with a rich history since 1945, is seeking a skilled Heavy Equipment Operator. This role involves operating large-scale machinery to contribute to our ongoing commercial and municipal projects. The successful candidate will play a pivotal role in maintaining our tradition of high-quality workmanship by efficiently handling big equipment and deep excavators at various construction sites Who we are: In West Philadelphia, in 1945, Nick Falcone Sr. began Nick Falcone & Sons by offering residential concrete, new development work, flat concrete & curb work. In 1960, Nick Falcone Jr. & his brother John Falcone expanded the business into heavy highway work & concrete roadway paving. In the late 1970's the company thrived on commercial, new residential developments & heavy highway work. The ownership then changed to the third generation of Falcone's in 1986. With continued success, the business expanded into municipal work & commercial site development. Currently, the fourth generation has already begun to hone their skills & knowledge in order to move towards the next set of leadership goals. Today, Nick Falcone & Sons is proud to employ a dedicated group of loyal & extremely knowledgeable staff to continue our decades long commitment to high quality workmanship. Responsibilities include but are not limited to: Safely operate heavy equipment, including large excavators, dozers, graders, and loaders, as required for commercial construction projects. Use GPS technology to navigate and operate equipment accurately, even in tight spaces and around utilities. Perform deep trench work, including the use of trench boxes and shoring, digging up to 20' deep depending on the project. Read and interpret grade and slope stakes and simple plans to ensure accurate operation of equipment. Perform daily safety and maintenance checks of machinery to ensure optimal operation. Coordinate with site supervisors to plan, organize, and execute activities related to earthmoving, site preparation, and material handling. Assist in the loading and transporting of materials and equipment to and from the job site. Ensure compliance with safety regulations and report any incidents or unsafe conditions to the site manager immediately. Manage and maintain logs of equipment use, maintenance, and repair. The ideal candidate should possess: Proven experience operating large-scale heavy construction equipment, particularly big excavators and deep trench work. Valid operator's license and clean driving record. Strong understanding of construction operations and safety practices, with an emphasis on working safely around utilities and in tight spaces. Physical fitness to handle manual and machinery operations. Ability to work early mornings, weekends, and in varying weather conditions as project demands. Good communication skills and ability to follow verbal and written instructions. Knowledge of GPS-guided equipment is a must. High school diploma or equivalent; additional certification in heavy equipment operation preferred. OSHA 10 certification preferred. Commitment to safety, especially when team members are working in trenches. Benefits: Paperless cloud-based payroll, with direct deposit & employee accessible app Paid Time Off Paid Holidays 401k Plan (with weekly employer contributions) Medical Plan Dental Plan Vision Plan Life Insurance & Long-Term Disability (company funded) Career Development Schedule: Monday to Friday 6:30a - 3:00p Saturday work is available 8-10 hour shift Overtime Potential Work Location: Aston, PA, 19014 - Corporate Office (pick up and drop trucks off daily) Please note that project locations may include Delaware County, Chester County, Montgomery County & Bucks County Join our team and master the operation of large-scale heavy equipment while contributing to high-quality commercial and municipal construction projects! Apply today to become part of our legacy of excellence! We foster a family-like environment where every employee is valued. As an equal opportunity employer, we prioritize diversity in our workforce, recognizing that innovation thrives on varied perspectives. We embrace individuals from diverse backgrounds, including ethnicity, religion, and education, without regard to race, age, gender, or sexual identity.

Master Heavy Machinery: Join Our Team as a Heavy Equipment Operator at Nick Falcone & Sons, Inc.! Job Title: Heavy Equipment Operators - Commercial Company Name: Nick Falcone & Sons, Inc Salary: Competitive based in experience Full Job Description Nick Falcone & Sons, Inc., a distinguished construction company with a rich history since 1945, is seeking a skilled Heavy Equipment Operator. This role involves operating large-scale machinery to contribute to our ongoing commercial and municipal projects. The successful candidate will play a pivotal role in maintaining our tradition of high-quality workmanship by efficiently handling big equipment and deep excavators at various construction sites Who we are: In West Philadelphia, in 1945, Nick Falcone Sr. began Nick Falcone & Sons by offering residential concrete, new development work, flat concrete & curb work. In 1960, Nick Falcone Jr. & his brother John Falcone expanded the business into heavy highway work & concrete roadway paving. In the late 1970's the company thrived on commercial, new residential developments & heavy highway work. The ownership then changed to the third generation of Falcone's in 1986. With continued success, the business expanded into municipal work & commercial site development. Currently, the fourth generation has already begun to hone their skills & knowledge in order to move towards the next set of leadership goals. Today, Nick Falcone & Sons is proud to employ a dedicated group of loyal & extremely knowledgeable staff to continue our decades long commitment to high quality workmanship. Responsibilities include but are not limited to: Safely operate heavy equipment, including large excavators, dozers, graders, and loaders, as required for commercial construction projects. Use GPS technology to navigate and operate equipment accurately, even in tight spaces and around utilities. Perform deep trench work, including the use of trench boxes and shoring, digging up to 20' deep depending on the project. Read and interpret grade and slope stakes and simple plans to ensure accurate operation of equipment. Perform daily safety and maintenance checks of machinery to ensure optimal operation. Coordinate with site supervisors to plan, organize, and execute activities related to earthmoving, site preparation, and material handling. Assist in the loading and transporting of materials and equipment to and from the job site. Ensure compliance with safety regulations and report any incidents or unsafe conditions to the site manager immediately. Manage and maintain logs of equipment use, maintenance, and repair. The ideal candidate should possess: Proven experience operating large-scale heavy construction equipment, particularly big excavators and deep trench work. Valid operator's license and clean driving record. Strong understanding of construction operations and safety practices, with an emphasis on working safely around utilities and in tight spaces. Physical fitness to handle manual and machinery operations. Ability to work early mornings, weekends, and in varying weather conditions as project demands. Good communication skills and ability to follow verbal and written instructions. Knowledge of GPS-guided equipment is a must. High school diploma or equivalent; additional certification in heavy equipment operation preferred. OSHA 10 certification preferred. Commitment to safety, especially when team members are working in trenches. Benefits: Paperless cloud-based payroll, with direct deposit & employee accessible app Paid Time Off Paid Holidays 401k Plan (with weekly employer contributions) Medical Plan Dental Plan Vision Plan Life Insurance & Long-Term Disability (company funded) Career Development Schedule: Monday to Friday 6:30a - 3:00p Saturday work is available 8-10 hour shift Overtime Potential Work Location: Aston, PA, 19014 - Corporate Office (pick up and drop trucks off daily) Please note that project locations may include Delaware County, Chester County, Montgomery County & Bucks County Join our team and master the operation of large-scale heavy equipment while contributing to high-quality commercial and municipal construction projects! Apply today to become part of our legacy of excellence! We foster a family-like environment where every employee is valued. As an equal opportunity employer, we prioritize diversity in our workforce, recognizing that innovation thrives on varied perspectives. We embrace individuals from diverse backgrounds, including ethnicity, religion, and education, without regard to race, age, gender, or sexual identity.

Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. Hiring immediately. We are growing and have an excellent opportunity for a skilled heavy equipment operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities Equipment operator on residential and commercial job sites. Follow OSHA and Roto-Rooter safety procedures. Work with a crew to complete excavation work. Interact with customers as needed. Maintain excavation equipment. Work in confined spaces and open trenches. Requirements Construction experience (residential and commercial). Load, unload and secure equipment on transport trailers according to guidelines. Current CDL Class A license Trenchless water, sewer & gas experience is a plus. Work a flexible schedule that may include nights and weekends. Complete jobs within specified timelines. Benefits At Roto-Rooter, we believe our most significant investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: Medical insurance with a Prescription Drug Card Accident and Critical Illness Insurance Dental Insurance Vision Insurance Paid Vacation Paid Training Life Insurance Matching 401K Retirement Savings Plan Tuition Reimbursement Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout nearly 100 years in business, we've found that military training and structure are an excellent fit for our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND32 #LI-NM1 #LI-ONSITE

Responsibilities Allan Myers is looking for a dedicated, hard-working equipment loader operator to join our team of professionals at our Dover Asphalt Plant. Learn and grow within our company; we promote from within and provide great benefits. This non-exempt position operates heavy construction equipment to perform various tasks on site. Responsible for safe operation of machines, maintenance, and upkeep of equipment. Responsibilities: Performs equipment maintenance duties such as cleaning, greasing and oiling machines. Adjusts hand levers and depresses pedals to operate equipment and control attachments such as blades, buckets, and swing booms. Discusses plans for the day's work with field manager and determines best method of getting assigned work done safely, accurately, and on time. Make judgments regarding the most efficient operations of equipment and attachments. Compliance with Allan Myers Polices including but not limited to. Equipment repair / maintenance procedures and Operator Safety Standards Safety, Safety, Safety! “Home Safe Tonight” and related policies Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Qualifications Minimum of 2 years of equipment operating experience required. Valid driver's license required. High School Diploma or equivalent (GED) a plus. Related work experience required. Overview Our Company Does Work That Matters Allan Myers is the largest heavy civil construction and materials production contractor in the mid-Atlantic. We build infrastructure: the highways and bridges that connect cities and towns, the public water and wastewater systems that provide clean water to your home and keep our streams clean. We take pride in meeting the highest quality standards because it ensures our work will have a long-lasting positive impact on the community. When you get home safe each night, you know that what you did that day matters. At Allan Myers, you are part of a team dedicated to making things better, including your career. We pay well and provide generous benefits. We offer extensive training and promote from within. If you have the drive, we will help you build a career in the thriving construction industry and reach your full potential. Allan Myers is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national or ethnic origin, age, disability, protected veteran status or other characteristics protected by law.

Apply now " Company: Dentsply Sirona, Inc Dentsply Sirona is the world's largest manufacturer of professional dental products and technologies, with a 130-year history of innovation and service to the dental industry and patients worldwide. Dentsply Sirona develops, manufactures, and markets a comprehensive solutions offering including dental and oral health products as well as other consumable medical devices under a strong portfolio of world class brands. Dentsply Sirona's products provide innovative, high-quality and effective solutions to advance patient care and deliver better and safer dentistry. Dentsply Sirona's global headquarters is located in Charlotte, North Carolina. The company's shares are listed in the United States on NASDAQ under the symbol XRAY. Bringing out the best in people As advanced as dentistry is today, we are dedicated to making it even better. Our people have a passion for innovation and are committed to applying it to improve dental care. We live and breathe high performance, working as one global team, bringing out the best in each other for the benefit of dental patients, and the professionals who serve them. If you want to grow and develop as a part of a team that is shaping an industry, then we're looking for the best to join us. Working at Dentsply Sirona you are able to: Develop faster - with our commitment to the best professional development. Perform better - as part of a high-performance, empowering culture. Shape an industry - with a market leader that continues to drive innovation. Make a difference -by helping improve oral health worldwide. Chemical Operator I - Resto Manufacturing - Dept. # 3745 - 3rd Shift Job Summary: Perform a broad variety of manufacturing assignments/tasks related to operating a variety of manufacturing mixing equipment. Job Duties: * Responsible for closely following batch formulas used in the production of a variety of products. Responsibilities include: properly setting up equipment, weighing out various liquid and powder raw materials (may include converting US weights to METRIC weights), loading mixing equipment with liquids and powders, monitoring process controls and making adjustments and minor repairs to machines as necessary. * Monitors process and/or loading, unloading, cleaning or setting up of equipment. * Processes work orders on time and efficiently according to set standards. * Weighs raw materials, final products, etc. * Uses statistical process control, including automated data acquisition devices, to monitor quality. * Maintains cleanliness of equipment and work area. Participates in department 5S program. * Counts and records production units and labor hours. * Meet and exceed all quality standards set forth for the department and division. Accurately and neatly documents all quality documents. * Other duties as assigned Education: * High School Diploma or Graduate Equivalency Diploma (GED) preferred Certifications/Licensing: * N/A Years and Type of Experience: * 6 months production experience Key Required Skills, Knowledge and Capabilities: * Ability to read and interpret documents such as safety rules, standard operating and maintenance instructions, and procedure manuals. * Ability to add, subtract, multiply, and divide in all units of measure using whole numbers, common fractions, metric measurement and decimals. Ability to use a calculator, convert weights from US standards to METRIC standards and use of Statistical Processes is required. * Ability to apply commonsense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Associate may be cross-trained to perform other duties within the department as needed. * Required to participate in various EHS programs. All external will be required to pass a basic reading, writing & math test (15 minutes in length) on the day of their on-site interviews Dentsply Sirona is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, sexual orientation, disability, or protected Veteran status. We appreciate your interest in Dentsply Sirona. If you need assistance with completing the online application due to a disability, please send an accommodation request to **************************. Please be sure to include "Accommodation Request" in the subject. For California Residents: We may collect the following categories of personal information in connection with the submission of your resume or application materials to us for employment, and if hired, your employment with us: identifiers (e.g., name, address, email address, birthdate); personal records (e.g., telephone number, signature, education information, criminal background information, passport number and visa information); consumer characteristics (e.g., sex, marital status, veteran status, race, disability, sexual orientation); professional or employment information (e.g., resume, cover letter, employment history, background check forms, references, certifications, transcripts and languages spoken); and inferences from personal information collected (e.g., a profile reflecting abilities and aptitudes). The above categories of personal information are collected for the following business purposes: performing recruitment and hiring services; processing interactions and transactions (e.g., to comply with federal and state laws requiring us to maintain certain records, managing the workforce); and security (e.g., detecting security incidents, protecting against fraudulent or illegal activity). For additional details and questions, contact us at **************************