zippia ai icon

Automatically Apply For Jobs With Zippi

Upload your resume to get started.

Miner skills for your resume and career

Updated January 8, 2025
3 min read
Below we've compiled a list of the most critical miner skills. We ranked the top skills for miners based on the percentage of resumes they appeared on. For example, 20.6% of miner resumes contained safety regulations as a skill. Continue reading to find out what skills a miner needs to be successful in the workplace.

15 miner skills for your resume and career

1. Safety Regulations

Here's how miners use safety regulations:
  • Assured adherence with all applicable federal and state health and safety regulations.
  • Comply with state and federal health and safety regulations.

2. Ground Support

Here's how miners use ground support:
  • Implemented remediation techniques for highly weathered, inadequate ground conditions through consolidation grouting and rock/ground support methods.
  • Ground support methods included conventional bolt, split set, wire mesh and mats, timber and steel sets.

3. MSHA

Here's how miners use msha:
  • Ensured various areas of the mine were in compliance with MSHA (Miner Safety and Health Administration) Standards.
  • Have multiple MSHA Form 5000-23 certification with task training on multiple underground heavy equipment.

4. Underground Mine

Here's how miners use underground mine:
  • Extracted coal from underground mine using standard industry procedures; followed mine safety procedures and protocols
  • Operated shuttle car in underground mine to transport materials from working face to mine cars or conveyor.

5. Conveyor Belts

Conveyor belts are a type of conveying system for conveying goods that are placed on a belt. Conveyor belts work with the help of pulleys. A belt is fixed and rotated between two or more pulleys. The pulleys on the belt conveyor are powered and they make the belt move and the goods placed on the belt move from one point to another.

Here's how miners use conveyor belts:
  • Operate or tend multiple vulcanizing machines and tools for repairing and splicing conveyor belts for a variety of industries.
  • Worked underground doing maintenance on the conveyor belts and general maintenance on equipment when needed.

6. Shovels

Here's how miners use shovels:
  • Worked driving cranes, dump trucks, forklifts, loading shovels, then I was a fitter on the face
  • Operated heavy equipment, including power shovels, winches.

Choose from 10+ customizable miner resume templates

Build a professional miner resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your miner resume.

7. Water Truck

A water truck is a large vehicle that specializes in facilitating water transportation at a worksite.

Here's how miners use water truck:
  • Worked on forklift, Haul truck, Water truck, Tractors as job was required to.
  • Operated heavy equipment including 240 ton haul trucks, water trucks and graders.
Select Skills To Add To Your Resume

8. General Maintenance

General maintenance is the regular check-up and repairs of machinery, buildings, and other mechanical equipment. General maintenance is performed by repair workers who are skilled to handle the day-to-day defects produced in the machinery. General maintenance aims to make sure the items remain in the best operational conditions. Usually, a set of planned activities are performed regularly by an expert to monitor the maintenance.

Here's how miners use general maintenance:
  • General maintenance with all underground duties
  • Assisted in the mining of coal in the mine* Provided general maintenance of the facility of requested/assigned projects

9. Preventative Maintenance

Here's how miners use preventative maintenance:
  • Worked as a mechanic helper performed preventative maintenance on equipment.
  • Assisted in preventative maintenance and preventative maintenance on company equipment

10. Front End Loader

The front-end loader is a piece of heavy equipment, usually, a wheeled vehicle (sometimes on tracks) with a hydraulically operated excavator at the front to excavate and load materials such as dirt, earth, stone, sand, demolition debris, asphalt, etc. into another type of machine such as dump trucks, conveyor belt, etc. without pushing the material against the ground. The front of the loader has a large square-shaped bucket connected to the base by two hydraulic arms.

Here's how miners use front end loader:
  • Operate Caterpillar 988G Front End Loader to various salt stock piles and to load all incoming trucks daily.
  • Operate front end loader, loading haul trucks.

11. Scoops

Here's how miners use scoops:
  • Job duties were cable splicing, operation pf roofbolter scoops and other equipment
  • Worked on bottom development crew operating roof bolters,scoops, air powered floor drills for blasting.

12. Shotcrete

Here's how miners use shotcrete:
  • Operated Drills/Handled Explosives-Muck Waste/Houskeeping-Operated Shotcrete Pump/Power tools-Follow Safety Policies
  • Back fill process, shotcrete, install pipe, operate heavy equipment Complete tasks in a safe and workman like manor

13. SAS

SAS stands for Statistical Analysis System which is a Statistical Software designed by SAS institute. This software enables users to perform advanced analytics and queries related to data analytics and predictive analysis. It can retrieve data from different sources and perform statistical analysis on it.

Here's how miners use sas:
  • Performed semiconductor failure analysis using SAS Enterprise Miner.
  • Analyzed and used different data mining techniques like Linear Regression, Clustering, Logistic Regression and Decision Trees in SAS Enterprise Miner

14. Equipment Maintenance

Equipment maintenance is any process that includes the use of maintenance methods and procedures to keep the organization's equipment in good and reliable working condition. This may include routine maintenance as well as corrective repairs. The practice takes place in a variety of settings, including catering establishments, industrial factories, manufacturing facilities, hotels, etc.

Here's how miners use equipment maintenance:
  • Job duties involved the loading and unloading of augers, equipment maintenance and repair.
  • Front load end operator of miner heavy equipment to complete stockpiling gravel, equipment maintenance, and road maintenance and repair.

15. Bulldozers

Here's how miners use bulldozers:
  • Time Keeper, Cherry Picker, Bulldozer, and welding, framing and concrete form.
  • Maintained bulldozers and surface mining equipment as a surface mechanic.
top-skills

What skills help Miners find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

List of miner skills to add to your resume

Miner Skills

The most important skills for a miner resume and required skills for a miner to have include:

  • Safety Regulations
  • Ground Support
  • MSHA
  • Underground Mine
  • Conveyor Belts
  • Shovels
  • Water Truck
  • General Maintenance
  • Preventative Maintenance
  • Front End Loader
  • Scoops
  • Shotcrete
  • SAS
  • Equipment Maintenance
  • Bulldozers
  • Longwall
  • Equipment Operation
  • Ground Control
  • Buggy
  • Bobcat
  • Decision Trees
  • Routine Maintenance
  • LHD
  • CDL
  • Dump Truck
  • Coal Mining
  • ATF
  • End Loaders
  • CPR
  • Torches
  • Water Lines
  • Batch Plant
  • SQL
  • MTI
  • Rock Drills
  • Caterpillar
  • Ventilation Fans
  • Gold Mine
  • Shuttle Car
  • Locomotives
  • Outby

Updated January 8, 2025

Zippia Research Team
Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Browse construction and extraction jobs