Mechanic Jobs in Berlin, CT

- Union: Mechanic 1/C NUMBER OF POSITIONS: 1 HOURLY RATE: $36.63 - $52.95 Responsibilities Under directive supervision inspects, repairs, adjusts and maintains all types of transportation and construction units and equipment such as but not limited to: Doing motor and electrical work, including adjusting timing, adjusting and repairing ignition systems and overhauling carburetors and fuel systems. Inspecting, removing, adjusting, repairing, and installing suspension and body components, axles and running gear assemblies, including wheels, brakes and steering assemblies, radiators, transmissions and differentials, and engine accessories such as generators, alternators, carburetors, starters, coils, fuel and air filters, etc. Clearing up trouble on units on the road or in the field. Road testing. Inspecting, repairing, overhauling, adjusting and maintaining all types of transportation and construction transmissions. Performing all work on hydraulic equipment such as that on pole-hole diggers and aerial lifts; valves, controls, cylinders, hydraulic motors and pumps, pressure adjustments and testing. (F Must pass a test of basic knowledge of mechanical and electrical principles applying to automotive and construction equipment and demonstrate ability to handle tools. Progresses as provided in Memorandum governing Mechanic-First Class. Previous mechanical experience preferred. Should have had a year's experience as a Laborer in the Transportation Department. Must be a high school graduate or have obtained an equivalency diploma recognized by the State of Maine. Must be familiar with Company's Safety Rules, approved methods of resuscitation and be able to render practical First Aid. Must obtain required licenses to drive and inspect Company equipment. inspection before return to service following major teardown to be made by Mechanic-First Class.) Operating a lathe and building bodies or compartments. Having required license or certification to drive and inspect Company equipment; if mandated by Maine State, must be certified to repair motor vehicles and crane equipment. Operating acetylene and electric welding equipment for cutting, heating, burning, welding and brazing operations. Directing the work of others assisting him. Acquiring the necessary knowledge and skills required for advancement to a fully qualified Mechanic-First Class. The measure of knowledge and skills acquired will be determined by appropriate tests. Performing other related or less skilled work as directed including preparing time sheets, running records, gasoline and oil records, and performing other clerical work as required. Skills and Requirements Must pass a test of basic knowledge of mechanical and electrical principles applying to automotive and construction equipment and demonstrate ability to handle tools. Progresses as provided in Memorandum governing Mechanic-First Class. Previous mechanical experience preferred. Should have had a year's experience as a Laborer in the Transportation Department. Must be a high school graduate or have obtained an equivalency diploma recognized by the State of Maine. Must be familiar with Company's Safety Rules, approved methods of resuscitation and be able to render practical First Aid. Must obtain required licenses to drive and inspect Company equipment. Qualifications Should possess temperament suited to jobs where manual dexterity, precision and patience are particularly essential. Must be willing to work extra and/or irregular hours and/or a shift schedule. Must be willing to work under unusual or special working conditions and surroundings, as well as the normal working conditions pertaining to this job. Must be particularly alert in observing hazards and avoiding accidents. Must possess keen faculties of observation. Must meet general requirements for all employees as described in the Preamble to Job Specifications. Competencies Be a role model Be agile Collaborate and Share Develop Self & Others Empower to grow Focus to achieve results Technical Skills Company: NY STATE ELECTRIC & GAS CORP Mobility Information Please note that any applicant who is not a citizen of the country of the vacancy will be subject to compliance with the applicable immigration requirements to legally work in that country. At Avangrid we provide fair and equal employment and advancement opportunities for all employees and candidates regardless of race, color, religion, national origin, gender, sexual orientation, age, marital status, disability, protected veteran status or any other status protected by federal, state, or local law. If you are an individual with a disability or a disabled veteran who is unable to use our online tool to search for or to apply for jobs, you may request a reasonable accommodation by contacting our People and Organization department at ********************. Avangrid employees may be assigned a system emergency role and in the event of a system emergency, may be required to work outside of their regular schedule/job duties. This is applicable to employees that will work in Connecticut, Maine, Massachusetts, and New York within Avangrid Network and Corporate functions. This does not include those that will work for Avangrid Power. Job Posting End Date: April-26-2025PDN-9eb3a12f-bf2c-44b8-ba35-8d9c16f3662b

a busy auto repair shop servicing car and light trucks minimum of 40 hours per week must have tools offering overtime paid holidays and vacation time candidate can be a b or c levels candidate needs to be punctual for a 8 to 5 Monday - Friday work schedule must work well with others PART TIME POSITION ALSO 20 TO 25 HRS PER WEEK Required qualifications: Legally authorized to work in the United States Preferred qualifications: 18 years or older At least high school diploma or equivalent or higher Reliable transportation to and from work Available to work: weekdays

Permanent $60,000-$80,000/yr Onsite 5 Days a Week in Cheshire, CT The EMT will possess strong technical and practical knowledge of the products fielded and supported by this group. The EMT will have a strong history of successfully building, and servicing and supporting complex automated systems. It is critical that the EMT can contribute technically in the projects in addition to regular responsibilities. Technical Degree in Mechanical / Electrical Engineering or Chemical discipline. Minimum of 5 years of experience with safely producing, maintaining, troubleshooting and repairing complex and safety sensitive automated systems Knowledge of electrical codes: NFPA 70 (NEC), NFPA 79, NFPA 496, UL 508A, etc. Experience with industrial controls, computer and PLC networks, set up and assistance. Orbital Welder's certification is a plus High attention to detail, and ability to interpret intricate drawings and instruction manuals. Excellent verbal and written communication skills. Ability to effectively present information and respond to questions from employees and/or customers. Ability to solve practical problems and deal with a variety of complex variables in situations where only limited standardization exists.

Join the winning team at Plaza Tire Service! In business since 1963, Plaza Tire Service is a growing company with 75 locations. Plaza Tire Service is big enough for you to make a career, and small enough to care that you do. We have an immediate opening for an Automotive Technician! COMPENSATION: $20.00/Hr. to $40.00/Hr. Benefits: Competitive Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: As a Plaza Tire Service Automotive Technician, you'll perform hands-on work on customer vehicles daily and direct the other shop personnel. This work can encompass a broad array of activities. Brake jobs Suspension components Alignments Front end parts Preventive maintenance items Tire repair/replacement Oil changes And more Qualifications: Previous automotive technician / mechanic experience required Possess current and valid Driver's license Must be at least 18 years old Working Conditions and Physical Demands: The Automotive Technician will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials, and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The use of safety goggles or other PPE may be required when working in these conditions. The Automotive Technician must be able to meet the following physical requirements: Stand up to eight hours per day in the shop and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly throughout the day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 70 pounds frequently. Communicate with customers and shop personnel Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Hiring NOW !! Meineke Car Care is seeking productive Mechanics to become an integral part of our team! We are Hiring immediately! We are looking for additional team members to handle increased volume. You will diagnose, adjust, repair, and overhaul automotive vehicles. Here at Meineke we believe in an incentive based pay structure. Responsibilities: Diagnose and repair passenger vehicles and trucks. Electronic code diagnoses and repair Perform routine vehicle tune-ups and maintenance Provide labor and time estimates for automotive repairs Inspect and test new vehicles for necessary adjustments Emission inspections of vehicles Continuously learn new information and techniques, including implementation of new tools and technology. Train & teach new team members as needed Contribute to a positive, productive team environment Encourage teamwork, positivity, and accountability among all team members As a leader in the automotive aftermarket, Meineke is constantly looking for driven and talented individuals to join our team. In nearly 900 shops spanning coast-to-coast, we look for those who share our passion for high quality repair work to help get our customers back on the road. A career with Meineke means putting your knowledge and hard-earned skills to work in a locally-owned shop. Whether youre looking for a position as a Shop Manager, Technician, or Service Advisor, Meineke provides opportunities for real-world experience in your local area. Prior experience at Dealerships, Midas, Monro, Firestone an asset, but not a requirement. Willing to train the right motivated person. Sign on bonus, 250. after 1st month 250 after 90 days REQUIREMENTS ASE certified or equivalent a plus Must be able to lift 50 lbs Must have a valid drivers license We are a 5-star independently owned fullservice shop in business for over 35 years here in Branford.

Company Background American Heat Treating, Inc. (AHT) located in Monroe, CT, was founded in 1981 to serve the saw blade and tooling businesses. It has become one of the finest and most versatile heat-treating facilities in the Northeast. Today, the company serves a variety of industries. To learn more, visit ***************************** AHT offers: Excellent benefits package including health, dental, vision and life insurance 401(k) with match and profit sharing 11 Paid Holidays, Generous Paid Time Off Wellness and Employee Assistance Programs Summary: We are looking for an energetic, self-motivated, and reliable individual to perform needed preventative maintenance and repairs on equipment and facility. Essential Duties and Requirements: Fabricate simple to moderate complexity replacement parts using machine shop equipment. Perform repairs to production fixtures using welding, plasma cutting and any other fabricating skills required. Perform all work requiring pipefitting. Perform all mechanical repairs, including preventative maintenance tasks. Perform all work involving furnace brick and insulating blanket repair. Maintain necessary records of repairs; enter completed work orders in computer. Diagnose and repair simple electrical problems involving motors and electric furnace heaters. Repair and/or replacement of furnace thermocouples. Maintain daily checks of vacuum furnace fluids and general operating parameters. Perform minor repairs to vacuum furnace components including hot zone and manifold train. Replace and maintain vacuum furnace pumps. Maintain facility wide lighting equipment, including light bulb and fixture replacement. When required assist Maintenance Manager. Conduct and Document preventive maintenance programs tasks. Maintain spare parts inventory at required levels. Maintain preventative maintenance supplies at required levels. Assist production personnel with equipment set-up and when necessary, start-up. Conduct daily visual inspection of all plant equipment. Maintain brine recovery system performing all necessary repairs as needed. Maintain brine evaporator liquid level, inspecting and maintaining filtration system. When required pump out recovered salt into solidification trays and store. Maintain control on brine transfer from wash tanks, Monitor level of waste by-products of salt recovery notify supervisor when disposal is required. Operate and maintain quench oil recovery unit by; controlling oil/water mixture storage; performing preventative maintenance and required repairs; maintaining consumables inventory; maintain portable oil filtration units. Maintain control over non recoverable oil waste tank. Qualifications and Education: Minimum High School diploma or GED with or 2-Year Technical Degree or Equivalent Experience. Min 5 year in Manufacturing Industrial Maintenance is required. Knowledge of shop mathematics. Knowledge of blueprint and electrical reading. PLC Forklift operation. Crane operation. Strong interpersonal skills, ability to work well with others. Must be able to analyze relevant Electrical Systems and use deductive reasoning to figure out what part of the system is causing it to malfunction. Knowledge of Microsoft 365 (Word, Teams, Excel, Power Point) and Email. ERP System knowledge. AHT is an equal opportunity employer, M/F/D/V.

starts at a range of $28-$32+ per hour based on experience MobilityWorks is actively seeking Mechanics and Technicians of different expertise levels to join our team urgently. We welcome candidates from diverse backgrounds, not limited to the mobility sector. Proficiency in diagnostics is essential, and knowledge of 12-volt systems is a valuable asset. While OEM and ASE certifications are advantageous, they are not mandatory. At MobilityWorks, our primary mission is to serve the disabled community by providing accessible minivans, full-size vans with lifts, and commercial fleet vehicles. We are committed to empowering wheelchair users with the mobility, independence, and freedom they deserve. If you are passionate about making a positive impact, please continue reading to learn how you can contribute to our team. We offer a remarkable work-life balance with regular business hours, allowing you to spend quality time with your family or pursue your interests outside of work. Every team member is highly valued, and we deeply appreciate the skills, efforts, and contributions of each individual. Our core values drive us to fulfill our mission and create a positive impact on our customers' lives. In the role of Automotive Technician at MobilityWorks, your responsibilities will encompass a wide range of highly skilled mechanical work, including the maintenance and repair of automotive and related equipment. Your tasks will include diagnosing complex maintenance issues, conducting vehicle inspections, performing road tests, and operating specialized equipment commonly used in the automotive repair industry. Here's what you'll be able to achieve in this position: • Perform diagnostics and testing • Install and connect various electrical wiring systems • Conduct functional tests on electrical systems • Identify and rectify any issues discovered • Install electrical panels and miscellaneous components in accordance with engineering specifications • Ensure work quality through thorough inspections • Interpret and understand schematics • Assess vehicle damage or malfunctions, providing repair recommendations, parts lists, and estimated repair times • Accurately perform under-car, under-hood, and preventive maintenance inspections • Troubleshoot issues related to the work performed To excel in this role, you should possess the following qualifications: • High school diploma or GED • General experience in automotive maintenance • Familiarity with brake and steering systems • Strong background in electrical and/or automotive wiring • Knowledge of hydraulic and electrical systems • Proficiency in electronic troubleshooting and repair • Exceptional mechanical problem-solving skills • Effective communication skills and the ability to collaborate in a team environment Tech Tier Program: APPRENTICESHIP MECHANIC - A student currently enrolled in an accredited technical program affiliated with MBW. This entry-level position involves hands-on mentoring with a Certified Mobility Technician or Advanced Mobility Technician, introducing students to the mobility industry and providing on-the-job experience with installations and repairs, leading to potential employment and career progression in this field. SERVICE MECHANIC - Entry-level mechanics seeking to acquire skills in automotive repair, combined with an introduction to the mobility industry. Service Mechanics will be enrolled in courses related to the completion of the Technician Playbook during the introductory period and will not be required to provide tools. Scope of Work includes mechanical repairs, general diagnosis, PDI, vehicle check-in, general adaptive equipment installations, and O.M. services. MOBILITY TECHNICIAN - Mobility Technicians have successfully completed all requirements of the Service Mechanic role, additionally completing primary driving control training, NMEDA electrical 2, and obtaining ASE certification G1 Automotive Maintenance & Light Repair or equivalent. They will begin installations of electronic and mechanical primary driving controls and perform driver fittings and driver electronic lockdown installations. Scope of Work includes above repairs/services, primary driving controls, NMEDA electrical, mobility/adaptive equipment installations and repairs, installation of electronic/mechanical primary driving controls, driver fittings, and driver electronic lockdown installations. CERTIFIED MOBILITY TECHNICIAN - Certified Mobility Technicians (MT) have successfully completed all apprentice trainings, mobility technician trainings, and at least 6 months of hands-on mobility experience performing installations and repairs. Under supervision, MTs can begin installations of electronic and mechanical primary driving controls and perform driver fittings and driver electronic lockdown installations. Scope of Work includes above repairs/services, OEM electronic repairs, ASE or dealership certification, A4 steering, suspension, and A5 brake repairs/replacement/diagnostics, mechanic/technician mentorship. ADVANCED MOBILITY TECHNICIAN - Advanced Mobility Technicians (MT) have successfully completed all apprentice trainings, completed certified mobility tech training, met the criteria requirements, and have at least 24 months of hands-on mobility experience with installations and repairs. Scope of Work includes above, OEM electronic repairs, ASE or dealership certification, A4 steering, suspension, and A5 brake repairs/replacement/diagnostics, mechanic/technician mentorship. MASTER MOBILITY TECHNICIAN - Master Mobility Technicians have successfully completed all previous level trainings and have extensive mobility experience with installations, diagnosis, and repairs. They require no supervision and can perform any mobility installation or repair. In addition to the above trainings and certifications, MMTs are required to attain EMC certification or equivalent, ASE A6 Electrical/Electronic systems, ASE S1 School Bus body systems and special equipment, and ASE E3 Auxiliary power systems. As you progress through each career level, various incentives such as patches, toll reimbursement, additional PTO accrual, and the President's Club trip await you. Our compensation structure is determined by factors such as skill level, years of experience, mobility experience, and location. What we offer you: • A work-life balance with Monday to Friday, 8 AM to 5 PM working hours, with no late nights or weekends. • Competitive compensation packages • Medical, dental, and vision insurance plans • Flexible spending accounts • 8 paid holidays, personal time off, and social responsibility time • Employer-paid benefits including tuition reimbursement, employee assistance program, life and disability insurance • 401(k) retirement plan • An incredibly fulfilling experience in a team-centric environment We strongly encourage military veterans to apply, and we embrace diversity and inclusivity. Join an organization that invests in YOU and become part of a team that makes a meaningful difference in people's lives.

Peckham Industries Salary Interval: Full Time Pay Range: N/A About Us: Peckham Industries Inc. (PII) has been a family-run business since 1924 and we believe our “family by choice” ethos delivers value as the trusted supplier of construction materials, products, and services in the communities we serve. Through our extensive network of hot mix asphalt and ready-mix concrete plants, quarries, and liquid asphalt terminals, PII delivers the highest quality materials and custom solutions to thousands of road construction and road maintenance customers. In addition, the company's construction operations include paving and road reclamation services, as well as precast/prestressed concrete production and erection of multi-level parking structures, specialty buildings, and bridge components. Become part of our mission by realizing your purpose, serving our community interests, and delivering growth for our customers. Peckham Industries educates, innovates, and applies technology in a way that is safe, sustainable, inclusive, and profitable. Job Summary: The Shop Mechanic will play a vital role in ensuring the proper maintenance, repair, and functionality of a fleet of trucks and trailers. The ideal candidate will have strong mechanical skills, a commitment to safety, and the ability to work in a fast-paced environment. Essential Functions: 1. Focused. Perform routine maintenance, diagnostics, and repairs of company vehicles and trailers. 2. Protect family and friends. Conduct thorough inspections to identify mechanical issues and ensure compliance with safety and operational standards. 3. Utilize diagnostic tools and software to troubleshoot and repair electrical, hydraulic, and mechanical systems. 4. Results matter. Maintain accurate records of repairs, inspections, and preventative maintenance activities. 5. Respect and engage. Collaborate with operators and other team members to identify recurring issues and propose solutions to improve performance. 6. Safety always wins. Adhere to all company safety policies and procedures, including the proper use of personal protective equipment (PPE). 7. Committed to serve. Maintain a clean, organized, and efficient work environment within the shop. 8. Obligated. Order parts and supplies as needed, ensuring timely availability for repairs. 9. Mastery. Stay up-to-date on industry trends, advancements, and best practices to enhance repair techniques and equipment knowledge. Requirements, Education and Experience: 1. High school diploma or equivalent; technical certifications in diesel mechanics, automotive repair, or related fields preferred. 2. Minimum of 3 years of experience as a mechanic working with a fleet of trucks and trailers, preferred. 3. Strong knowledge of hydraulic, electrical, and mechanical systems. 4. Proficiency in using diagnostic tools, hand tools, and power tools. 5. Ability to read and interpret schematics, blueprints, and technical manuals. 6. Strong problem-solving skills and attention to detail. 7. Effective communication and teamwork abilities. 8. Valid driver's license. 9. Ability to lift heavy objects, work in various weather conditions, and stand for extended periods. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 5% travel by personal vehicle to offices throughout the state of New York, and New England based on the needs of the business. Work Environment/Physical Demands: Heavy work includes moving objects up to 50 lb. or more. This position works on or near moving mechanical parts and loud equipment. Requires the ability to stand for long periods of time as well as lifting, bending, squatting, walking, reaching, and repetitive motion. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact ***********************. PI36528c32c74d-26***********5

US Foods is Hiring Diesel Fleet MechanicsClifton Park, NYOur Mechanics Deserve the Best Benefits: Earn $30 - $40/hour based on experience $600 referral bonus Career advancement opportunities Product discounts 401k with company match Medical, dental, and vision benefits Vacation, personal, and sick time Looking for a career? We are always striving to standardize how we do business. This approach has helped us maintain the #1 OE market share in our area and the average employee being with us 9 years or more. This is how we reach one of our core values of providing a stable career for our most valuable asset, our employees. Begin Now Requirements At least 3 years of previous fleet mechanic experience Valid and clean driver's license Must have own tools NYS inspection license About US Foods US Foods is one of America's great food companies and a leading foodservice distributor, partnering with approximately 300,000 restaurants and foodservice operators to help their businesses succeed. With 28,000 employees and over 70 locations, US Foods provides its customers with a broad and innovative food offering and a comprehensive suite of e-commerce, technology, and business solutions. US Foods is headquartered in Rosemont, Illinois, and generates more than $28 billion in annual revenue.

Mechanic - Truck and Heavy Equipment Fleet (Full-Time) Compensation: Competitive hourly pay + Overtime Schedule: Full-time, 40+ hours/week (more during busy season) We're a growing, fast-paced tree service and forestry company in Hampden, MA looking for an experienced Mechanic to keep our fleet of trucks and equipment maintained and repaired. If you're skilled with heavy-duty vehicles and enjoy solving mechanical challenges, we'd love to have you on our team. Key Responsibilities: Perform maintenance and repairs on Class 7 & 8 trucks Diagnose and troubleshoot mechanical, electrical, and hydraulic issues Maintain and repair tree care and construction equipment (chippers, skid steers, grinders, etc.) Conduct DOT inspections and ensure vehicles stay in compliance Keep detailed service records and manage parts inventory Work with operators and crew leads to schedule and prioritize repairs Occasionally assist in the field when urgent equipment support is needed Requirements: Solid experience working on Class 7 & 8 trucks (required) Basic diagnostic skills and the ability to troubleshoot issues independently Equipment repair experience (skid steers, loaders, chippers, etc.) is a plus Valid driver's license (CDL is a plus, but not required) Must be able to obtain a DOT medical card Must be reliable, organized, and self-motivated Willing to work 40+ hours per week, with overtime available during peak season What We Offer: Overtime pay Health insurance Paid holidays Year-round, steady work A respectful, tight-knit crew that values your skills Interested in joining a company that takes pride in its people and its equipment? Send your resume or a brief summary of your experience to ******************************

24 Northwest Dr, Plainville, CT 06062 What's the Job? Ready to accelerate your career while helping our customers move forward? As a Technician at Penske, you'll do exactly that. Here, you'll do preventative maintenance and minor repairs on the newest and best maintained fleet of vehicles in the industry. You will help our customers keep their vehicles in shape and on the road. Whether you're looking for your first job out of school or have some vehicle repair experience and are looking to switch gears, becoming a Penske Technician may be a great fit for you. Why is this job awesome? For starters, no day is the same. You'll get to work on lots of different types of equipment-not just one manufacturer. We work hard to get the job done, but we also make sure you have the time you need to do the job right. Safety and reliability are our top priorities. Working alongside experienced supervisors and master technicians, we'll teach you about our vehicle maintenance processes and the cutting-edge technology we use. And we will make sure you are getting the industry certified training you need to succeed and grow your career. You'll learn from the best in the industry. We also take pride in how clean our facilities are, and we provide you with all the necessary major shop tools. If you are mechanically inclined or have completed any vehicle repair training, are willing to learn, and interested in a stable career with a lot of opportunity for growth, join our team. Main Responsibilities: • Making sure vehicles are maintained and safe for our customers • Using Penske's tools and technologies to log, research and complete repairs, including basic vehicle diagnostics • Doing preventative maintenance repairs-like replacing or rotating tires-and completing vehicle component lubrication and replacement, some electrical system repairs, and cooling system maintenance on gas and diesel engine vehicles • Partnering with your manager to learn new skills using Penske's technician training and hands-on coaching • Working on other projects and tasks as assigned by supervisor Why Penske is for You: • Competitive starting salary • Shift Premiums - 2nd ($3.00), 3rd ($4.00) • Career stability • Opportunity for growth • Excellent benefits, including lots of time off • Strong, well-rounded training programs • Advanced vehicle maintenance technology • Location and schedule flexibility Qualifications: • High school diploma or equivalent preferred; vocational or technical certification in vehicle repair preferred • Basic mechanical aptitude and 1-2 years of automotive or diesel repair experience (preferred) • Valid driver's license • The ability to solve problems and comfort using tools • Excellent customer service skills and communication skills • The ability to work well as part of a team and outside • Basic computer skills • The associate will be required to understand and comply with specific instructions, guidelines, rules, regulations, or other information established by Penske management • The associate must be able to perform all work adhering to DOT, OSHA, and all Penske safety and maintenance policies; including but not limited to the correct selection and use of appropriate tools, PPE, machine guarding, and established best safety practice. • Regular, predictable, full attendance is an essential function of the job • As this position requires driving Penske and customer vehicles, it is regulated by the DOT and requires a current driver qualification file to be maintained as required by the role. The driver qualification file includes: an annual motor vehicle records (MVR) check, a successfully completed DOT Physical, and Safety Performance History records request from prior employers in the last 3 years. Additionally, CDL holders will have a DOT Drug Screening within 30 days of start and subject to a FMCSA Clearinghouse review. • Willingness to work the required schedule, work at the specific location required, complete Penske employment application, submit to a background screening (to include criminal checks, past employment and education), the ability to pass a drug screen and physical as required by the Department of Transportation, and potential travel within a near geography for training are required This position is regulated by the Department of Transportation or designated as safety sensitive by the company, and the ability to work in a constant state of alertness and in a safe manner is required. Associates must have the ability to accept responsibility for their own safety, as well as the safety of others. Physical Requirements: The physical and mental demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of this job, the associate will be required to move frequently, stand, walk, climb, bend, and sit for extended length of time throughout their scheduled working period. • The associate is required to use their hands on a routine and daily basis to grasp, reach, touch, handle, feel, and/or otherwise operate required tools or controls. • The associate must be able to work safely at heights using applicable ladders and elevated working platforms. • The associate must be able to safely work in all weather conditions. • Given the frequent movement of large trucks through the workplace, the associate must be able to see and hear in order to safely navigate the work environment. • The associate must be able to regularly lift and/or move up to 50lbs/23kg and occasionally lift and/or move up to 100lbs/45kg. Salary: $26.50 hourly Hours: TBD by Branch Manager Shift Differentials: • Second shift start times after 11am are eligible for $3.000 per hour shift differential • Third shift start time after 9pm are eligible for $4.000 per hour shift differential Penske is an Equal Opportunity Employer About Penske Truck Leasing/Transportation Solutions Penske Truck Leasing/Transportation Solutions is a premier global transportation provider that delivers essential and innovative transportation, logistics and technology services to help companies and people move forward. With headquarters in Reading, PA, Penske and its associates are driven by a dedication to excellence and a commitment to customer success. Visit Go Penske to learn more. Job Category: Vehicle Maintenance/Mechanics/Technicians Job Function: Truck Maintenance Job Family: Vehicle Maintenance Address: 34 Northwest Dr Primary Location: US-CT-Plainville Employer: Penske Truck Leasing Co., L.P. Req ID: 2505004

Master Automotive Technician / Mechanic The Shop CT is a high end automotive performance and maintenance oriented facility that focuses on quality work and excellent service. We have continued to strive for greatness which speaks for itself, as we enter our 20th year in the industry. This type of achievement we are humbled and proud to share with others as we would love to stay in business another 20. With the continued loyalty and care from our customers and clients, we know that another achievement of this magnitude is possible. That being said, we are looking to expand our family here with another technician to add amongst our other excellent and qualified mechanics. Role Description Due to our latest expansion at The Shop CT, we are currently looking to fill new positions. Bringing in members to our already large Shop Family is both new and exciting. Being that we take immense pride in those who work for us, they must represent who we are as a company. Someone with a positive attitude, eager to work and overall a beneficial team player. As the onboarding process continues, we are yet again searching for new hires. With all that being said, we are looking for new Automotive Technicians who are experienced and have a passion for this industry. We are handling the workload as best as we can with our current staffing, however, due to our continued growth - we are searching for new applications. Qualifications / Responsibilities Autotechnicians must be a certified technician with at least 5 years of experience in the automotive or performance oriented field. All employees must be incredibly punctual, arriving to work on time ready to go. A strong work ethic is essential for a career at The Shop CT. Independent thinking is a critical component, actively taking on work into your own hands - however - help is always available if need be. Mechanics must come with their own tools / tool boxes as they are not provided by other technicians or management. Lastly, future hires must have a positive attitude and willingness to work alongside others. The dynamic is very close, where all consider one another friends / family. Individuals who negatively impact the working environment will be terminated. Background checks will be conducted prior to the hiring process, to ensure that all individuals on board are a perfect fit for The Shop.

> Employees Apply Here" onclick="window.location.href = '****************************** InternalUser=true&locale=en_US/';"/> Road Mechanic - 90365515 - Groton, CT Company: Amtrak Your success is a train ride away! As we move America's workforce toward the future, Amtrak connects businesses and communities across the country. We employ more than 20,000 diverse, energetic professionals in a variety of career fields throughout the United States. The safety of our passengers, our employees, the public and our operating environment is our priority, and the success of our railroad is due to our employees. Are you ready to join our team? Our values of 'Do the Right Thing, Excel Together and Put Customers First' are at the heart of what matters most to us, and our Core Capabilities, 'Building Trust, Accountability, Effective Communication, Customer Focus, and Proactive Safety & Security' are what every employee needs to know and do to be most impactful at Amtrak. By living the Amtrak values, focusing on our capabilities, and actively embracing and fostering diverse ideas, backgrounds, and perspectives, together we will honor our past and make Amtrak a company of the future. SUMMARY OF DUTIES: A Road Mechanic ensures compliance of all railroad, safety, operations, and federal railroad administration rules and regulations. ESSENTIAL FUNCTIONS: The Road Mechanic will troubleshoot and perform heavy repairs to all types of equipment components including engines, transmissions, gear boxes, hydraulic pumps, motors, valves, cylinders, working components, conveyors, booms, buckets, and electrical systems. Solve work related problems, make decisions, provide instructions, drive heavy duty service trucks and understand mechanical, electrical and automated operations of machinery. MINIMUM QUALIFICATIONS: * Must be a minimum of 18 years of age and a high school graduate. * Must have good communication skills and a strong mechanical aptitude. * Must have a valid driver's license on the date of hire. * Driver's License, the ability to obtain a CMV or CDL is required. * Must be able to read and speak the English language because this position requires following government regulations and instructions. * Experience with pneumatic, hydraulic and electrical systems including the ability to read schematics is preferred. * Experience in other mechanical oriented occupations will be considered. PREFERRED QUALIFICATIONS: * Some welding experience. * Ability to read hydraulic and electric schematics. * Ability to lift 50 to 80 pounds on a frequent basis. * Ability to comprehend and comply with instructions. COMMUNICATIONS AND INTERPERSONAL SKILLS: Must have excellent written and oral communication skills. The hourly rate is $38.51 (with opportunity for increases, as per the applicable collective bargaining agreement, after beginning employment). Amtrak offers a comprehensive benefit package that includes health, dental, and vision plans; wellness programs; flexible spending accounts; 401k retirement plan; life insurance; paid time off; reimbursement of education; Public Service Loan Forgiveness eligibility; Railroad Retirement sickness and retirement benefits; and rail pass privileges. Some benefits are subject to the collective bargaining agreement. Learn more about our benefits offerings here. Requisition ID:163584 Posting Location(s):Connecticut Job Family/Function:Engineering Relocation Offered:No Travel Requirements:Up to 25% You power our progress through your performance. We want your work at Amtrak to be more than a job. We want your career at Amtrak to be a fulfilling experience where you find challenging work, rewarding opportunities, respect among colleagues, and attractive compensation. Amtrak maintains a culture that values high performance and recognizes individual employee contributions. Amtrak is committed to a safe workplace free of drugs and alcohol. All Amtrak positions requires a pre-employment background check that includes prior employment verification, a criminal history check and a pre-employment drug screen. Candidates who test positive for marijuana will be disqualified, regardless of any state or local statute, ordinance, regulation, or other law that legalizes or decriminalizes the use or possession of marijuana, whether for medical, recreational, or other use. Amtrak's pre-employment drug testing program is administered in accordance with DOT regulations and applicable law. In accordance with DOT regulations (49 CFR § 40.25), Amtrak is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Amtrak to obtain these records, the individual will not be permitted to perform safety-sensitive functions. In accordance with federal law governing security checks of covered individuals for providers of public transportation (Title 6 U.S.C. §1143), Amtrak is required to screen applicants for any permanent or interim disqualifying criminal offenses. Note that any education requirement listed above may be deemed satisfied if you have an equivalent combination of education, training and experience. Amtrak is an EOE/Affirmative Action Minority/Female employer, and we welcome all to apply. We consider candidates regardless of race/color, religion, sex (including pregnancy, childbirth and related conditions), national origin/ethnicity, age, disability (intellectual, mental and physical), veteran status, marital status, ancestry, sexual orientation, gender identity and gender expression, genetic information, citizenship or any other personal characteristics protected by law. > Employees Apply Here" onclick="window.location.href = '****************************** InternalUser=true&locale=en_US/';"/>

Diesel Technician/Mechanic Department: Operations FLSA: Non-Exempt Location: All MEG Branches Hours: 8 hour day, 30 min. break Summary: Primarily responsible to perform maintenance work on a Fleet of Extensive Diesel Engine Heavy Duty Trucks and Trailers. May operate earth-moving equipment or trucks. Essential Duties and Responsibilities include the following: On Call availability for emergency breakdowns Diagnoses malfunctions and performs vehicle repairs (e.g. adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, clutches, transmissions and oil, temperature, gas regulating components, adjust/test/rebuild engines etc.) and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements. Test-drives vehicles to ensure repair resolved the problem. Arranges for and obtains appropriate inspections and approval of all major repairs before vehicle is released from maintenance facility. Maintains a safe, clean, productive and efficient work area including ensuring work area is in compliance with all relevant Federal, State/Provincial and local guidelines and requirements. Identifies and reports any additional maintenance and/or repairs found necessary in conducting assigned repairs and maintenance including repairs and maintenance required to be performed by Technicians with a higher qualification level. Records time spent, parts used and repairs and/or maintenance conducted on appropriate form. Advises Maintenance Supervisor and or manager of unsafe maintenance conditions or practices and/or vehicle abuse. Performs road calls and on the road repairs as assigned. Other duties may be assigned to meet business needs Qualification/Requirements: Technical knowledge of major vehicle systems and diesel equipment is required Diagnostic, Electrical, and AC skills are a must Have previous fleet experience and are familiar with diesel and gasoline systems Possess the recommended minimum Hand tools for a Master Technician Ability to use good judgment and Decision Making skills Must pass DOT pre-employment physical, drug screen and background check Education/Training/Experience : 2-3 Years diesel mechanic experience Valid applicable state license (CDL preferred) Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is regularly required to use hands to handle, control, or feel objects, tools or controls, to stand, sit, twist, bend an conduct repetitive movement. The employee must lift and carry equipment weighing 50-75 pounds. Specific vision abilities required by this job include close vision and the ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The work is primarily performed in the shop, yard, and office or vehicle environment, often non-controlled environmental conditions. The noise level in the work environment is moderate to loud. To reduce exposure to harmful materials, workers often wear coveralls, gloves, shoe covers, safety glasses, or goggles and a hard hat. The duties listed above are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change

GAL AeroStaff Ltd. is an aerospace staffing is a company specializing in temporary and permanent staffing for general and technical positions the aviation and aerospace industry. In keeping with this goal, each benefit program has been carefully devised. These benefits include time-off benefits, such as vacations and holidays, and insurance and other plan benefits. We are constantly studying and evaluating our benefits programs and policies to better meet present and future requirements. With our employees' well-being top of mind, we offer a comprehensive andcompetitive Benefits Program, which includes the following: Insurance plans Dental, medical, life insurance, disability, and more Competitive base salary Retirement savings plan Employee Assistance Program What are your contributions to the team? Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work performed per appropriate manuals and regulations as required Adhere to Bombardier General Work Requirements for factory, shop and or hangar positions Comply with Environmental Health & Safety policies and procedures. Participate in 5-S activities. Perform all work in a safe and timely manner Operate ground support equipment as required Perform mechanical / electrical removals and installations Assist with maintenance at off-site locations as needed Assist other maintenance disciplines as needed Assist with fuel and/or de-fuel of aircraft as needed Assist with engine removal / installation as needed Assist with aircraft component repair as needed How to thrive in this role? You have an Airframe & Powerplant (A&P) certificate You typically have a minimum of 5 years' aircraft maintenance work experience or substantiated equivalent experience You have the ability to interpret and work with mechanical engineering drawings You have the ability to effectively communicate in both written and verbal form on individual and/or aircraft status You have your own basic set of hand tools with the ability to demonstrate Inventory and control of tools You have the ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required You are able to work unscheduled overtime including nonscheduled work days and holidays You are able to work in seasonal/inclement weather outside You have the ability to obtain a Security Identification Display Area badge (SIDA) You have experience on corporate jets (preferred) You have basic PC skills

Corrections professionals who foster a humane and secure environment and ensure public safety by preparing individuals for successful reentry into our communities. * Accepting applications * Open & closing dates 04/18/2025 to 05/02/2025 * Salary $44.43 - $44.43 per hour * Pay scale & grade WS 09 * Help Location * Danbury, CT 1 vacancy * Remote job No * Telework eligible No * Travel Required Occasional travel - Travel may be required for training and/or work related issues. * Relocation expenses reimbursed No * Appointment type Permanent * Work schedule Full-time * Service Competitive * Promotion potential 09 * Job family (Series) * 5306 Air Conditioning Equipment Mechanic * Supervisory status No * Security clearance Other * Drug test Yes * Announcement number DAN-2025-0035 * Control number 835507400 Help This job is open to * The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. Clarification from the agency * THIS IS A DELEGATED EXAMINING ANNOUNCEMENT OPEN TO ALL U.S. CITIZENS. • Duty Location: FCI Danbury, CT Help Duties Supervises inmate workers involved in the new construction, rehabilitation, repair and maintenance of the institution's heating, ventilation and air conditioning systems. Performs routine preventive maintenance on systems that operate continuously. Must possess skills and knowledge to use measuring instruments and tools required; work with blueprints and drawings and be able to plan and lay outwork, ensuring that materials and related items will meet code requirements. Maintains security and control of the work area by maintaining key and inmate accountability. Along with all other correctional institution employees, incumbent is charged with responsibility for maintaining security of the institution. The staff correctional responsibilities precede all others required by this position and are performed on a regular and recurring basis. Help Requirements Conditions of Employment * U.S. Citizenship Required * See Special Conditions of Employment Section * Selective Service Requirement: ****************** Interagency Career Transition Assistance Plan (ICTAP). The ICTAP provides eligible displaced Federal competitive service employees with selection priority over other candidates for competitive service vacancies. If your agency has notified you in writing that you are a displaced employee eligible for ICTAP consideration, you may receive selection priority if: 1)this vacancy is within your ICTAP eligibility; 2) you apply under the instructions in this announcement; and 3) you are found well qualified for this vacancy. To be well qualified, you must satisfy all qualification requirements for the vacant position and rate equivalent to the Highly Qualified category using established category rating criteria. You must provide proof of eligibility with your application of ICTAP eligibility or a copy of your separation personnel action form. Additional information about ICTAP eligibility is at: Click Here The Career Transition Assistance Plan (CTAP) provides eligible surplus and displaced competitive service employees in the Department of Justice with selection priority over other candidates for competitive service vacancies. If your Department of Justice component has notified you in writing that you are a surplus or displaced employee eligible for CTAP consideration, you may receive selection priority if: 1) this vacancy is within your CTAP eligibility; 2) you apply under the instructions in this announcement; and 3) you are found well qualified for this vacancy. To be well qualified, you must satisfy all qualification requirements for the vacant position and rate equivalent to the Highly Qualified category using established category rating criteria. You must provide a copy of your written notification of CTAP eligibility with your application. Additional information about CTAP eligibility is at: Click Here Qualifications To be considered for the position, you must meet the following qualification requirements. Applicant must have had sufficient training and experience to show their ability to perform the duties of the position. Qualifications will be determined by comparing your application to the responses to the Applicant Assessment Questions against the guidelines found in the Job Qualification System for Trades and Labor Occupations, WS-5306 Series. To qualify for this position, you MUST meet the Barely Acceptable level on both screen-out elements (Ability to supervise) and (Aptitude for work with prisoners); receive at least one half of the total possible points; AND you must furnish detailed information on your resume to support your assessment responses to demonstrate that you clearly possess the experience and skills to successfully perform the duties of this position at the journeyman level. Failure to specifically identify skills equivalent to a journeyman in this field may result in your score being lowered or in being found ineligible for this vacancy. AND Selective Factor: Applicants applying for this position MUST also possess the following Selective Factor. In the event that you do not possess the Selective Factor, you will be found ineligible for the position. Applicants must have one of the following: * Applicant must possess an EPA approved, Section 608 Technician Certifications "Type I" and "Type II". OR * Possess an EPA approved, Section 608 Technician Certification "Universal". NOTE: ALL applicants MUST electronically upload a copy of their certification at the time you apply. Applicants who fail to provide proof of certification will not receive consideration for this position. Exceptions: Current BOP Employees in the WS-5306 positions will be considered to have met the selective factor for the position. The screen-out elements are a critical self-assessment of the applicants experience and are essential for satisfactory job performance. Your eligibility for consideration will be based on your responses to the questions in the application. Additional information This position IS included in the bargaining unit. In accordance with 5 U.S.C. 3307, a maximum entry age of 36 has been established for initial appointment to a position in a Bureau of Prisons institution. If you are above the maximum entry age and have prior federal law enforcement coverage, you MUST submit an SF-50 to verify prior coverage. Qualified Preference Eligible Veterans may be exempt from meeting the maximum age. Please refer to the Required Documents Section for the appropriate documentation to submit to validate veteran eligibility. Special Conditions of Employment Section: Appointment is subject to satisfactory completion of a pre-employment and panel interview, urinalysis, physical, and background investigation. All applicants are subject to, and must satisfactorily pass all screening requirements in relation to National Crime Information Center (NCIC) and credit check. All applicants not currently working in an institution will be required to complete a qualification inquiry regarding convictions of misdemeanor crimes of domestic violence in order to be authorized to carry a firearm. The Core Value Assessment (CVA) is an in-person assessment that must be facilitated at a Bureau of Prisons Human Resource Servicing office. On the day of the scheduled interview, a CVA will be administered. The applicant assessment must be completed within a 70 minute time period and a passing score of 68 must be obtained. Further employment consideration will not be extended if the applicant fails to complete the examination or fails to achieve a passing score. Note: The Core Value Assessment will not be administered to current BOP employees. Successful completion of the "Introduction to Correctional Techniques," three-week training course at Glynco, Georgia is required. Additional selections may be made if vacancies occur within the life of the certificate. Read more * Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Your application will be evaluated and rated under DOJ's Category Rating and Selection Procedures. Based upon your self-reported responses to the assessment questions during the application process, your application will be placed into one of three categories: Best Qualified, Highly Qualified, or Qualified. Applications will be reviewed from the top quality category. Your resume and supporting documentation will be used to determine whether you meet the job qualifications listed in this announcement. If you are found qualified for this job, your resume and supporting documentation will be compared to the responses you provided on the online assessment questionnaire. NOTE: Candidates within the top quality category and who are eligible for veterans preference will receive selection priority over non-veteran preference eligibles. If you are entitled to veterans preference, you should indicate the type of veterans preference you are claiming on your resume. Although veterans preference points are not assigned under the category rating procedures described under "How You Will Be Evaluated", veterans preference eligibles are listed ahead of non-veterans within each category for which they are qualified. In addition, qualified veterans with a compensable service connected disability of 10% or more are placed at the top of the highest qualified category as defined by category rating procedures. What Job Elements are Required for this Position? The following Job Elements are required: * Ability to supervise. (SCREEN-OUT ELEMENT) * Aptitude for work with prisoners. (SCREEN-OUT ELEMENT) * Knowledge of equipment, assembly, installation, repair, etc. * Technical practices. * Ability to interpret instructions, specifications, including blueprint reading. * Ability to use and maintain tools and equipment. * Knowledge of materials. * Troubleshooting. You may preview questions for this vacancy. * Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. * Required Documents As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies. * Veterans' Preference Documentation: Veterans MUST provide a DD-214 demonstrating that they have been discharged or released from active duty under honorable conditions (i.e., the individual must have received either an honorable or general discharge). * If you are on active duty and expect to be discharged or released from active duty service within 120 days, you may submit a Certificate of Release or Discharge from Active Duty from the appropriate Branch Personnel Office containing the following information: (1) the military service dates including the expected discharge or release date; (2) and the character of service (must be an honorable or general discharge); and (3) any qualifying service/campaign/expeditionary medals. * SF-15: If you are a disabled veteran, a Purple Heart recipient, widow/widower of a veteran, the spouse of a disabled veteran or the parent of a disabled or deceased veteran, submit a completed Standard Form (SF) 15, "Application for 10-Point Veteran Preference"; all other required documentation identified on the SF-15, in addition to the veteran's DD-214 described above. A Department of Veterans Affairs letter must contain: the Veteran's Name and Combined Service-Connected Evaluation. For a copy of the most current SF-15, Click Here. * Failure to submit all required documents at the time of application will result in the loss of claimed preference eligibility. * Resume: showing relevant experience (cover letter optional). Experience that would not normally be part of the Federal employee's position is creditable when documented by satisfactory evidence (e.g., a memorandum from the manager, Human Resource Manager, SF-52, etc.) * To receive credit for experience contained in an application, the experience must be documented in month/year format (MM/YYYY), reflecting starting date and ending date and include the number of hours worked per week. Failure to follow this format may result in disqualification. * College transcript: which includes the School Name, Student Name, Degree and Date Awarded (if applicable). (Note: If you are selected for this position, official transcript(s) will be required prior to your first day). * SF-50: for proof of prior LEO coverage, if applicable. Failure to provide these documents could possibly result in removal from consideration for this vacancy. If uploading documentation, do not identify/save your documents utilizing a special character such as %, #, @, etc. Documentation should be identified/saved as VA Letter, DD214, or Transcripts. We cannot be held responsible for incompatible software, delays in mail service, applicant application errors, etc. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. * How to Apply You must apply through the online application system at **************** Follow the prompts to register, answer a few questions and submit all required documents. NOTE: Submission of a resume alone is not a complete application. This position may require the completion of additional forms and/or supplemental materials as described under the Required Documents section. Please carefully review the complete job announcement and the "How to Apply" instructions. Failure to provide the required information and/or materials will result in your application not being considered for employment. Claiming Veterans Preference? If yes, you MUST claim preference on-line during the application process and upload documentation to support preference claimed. Failure to claim Veterans Preference or provide supporting documentation may result in you not receiving appropriate consideration during the assessment process. Required supporting documentation must be electronically uploaded or transferred from USAJOBS (uploaded). All required supporting documentation MUST be received by the Consolidated Staffing Unit by 11:59 p.m., Eastern Standard Time, on the closing date of the vacancy announcement. Supporting documentation for announcements with an application limitation MUST be uploaded the same day you apply, as these positions may close earlier than stated in the announcement. Paper applications: If applying online is impossible, please contact the Consolidated Staffing Unit at the telephone number listed below, prior to the closing date of the announcement for the alternate application procedure. Contact for Assistance in Applying On-Line: DOJ, Federal Bureau of Prisons Consolidated Staffing Unit 346 Marine Forces Drive Grand Prairie, TX 75051 E-Mail: *********************************************** Phone: ************ Agency contact information CSU Phone ************ Email *********************************************** Address JUSTICE, BUREAU OF PRISONS Consolidated Staffing Unit 346 Marine Forces Drive Grand Prairie, Texas 75051 United States Next steps We will notify you of the outcome after each step of the application process has been completed. Applicants will be notified via e-mail, to the e-mail address registered in USAJOBS. The referral certificate or list of eligibles will then be issued to the selecting official for further consideration. The Human Resource Office may then contact you for an interview if they wish. We expect to make a final job offer within 80 days after the closing date of the announcement. Applicants referred on a certificate of eligibles may receive an Inquiry of Availability (OF-5 Form)via e-mail, mail or a telephone inquiry from the local Human Resource Department. Applicants MUST complete the OF-5 form and return it to the Human Resource Management Office or contact the Human Resource Department telephonically or via e-mail. Applicants MUST also telephone the Human Resource Department during normal business hours to schedule an interview. Failure to either return the form or contact the Human Resource Department will result in a loss of consideration for the position. * Fair and Transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. * Criminal history inquiries * Equal Employment Opportunity (EEO) Policy * Financial suitability * New employee probationary period * Privacy Act * Reasonable accommodation policy * Selective Service * Signature and false statements * Social security number request Help Required Documents * Veterans' Preference Documentation: Veterans MUST provide a DD-214 demonstrating that they have been discharged or released from active duty under honorable conditions (i.e., the individual must have received either an honorable or general discharge). * If you are on active duty and expect to be discharged or released from active duty service within 120 days, you may submit a Certificate of Release or Discharge from Active Duty from the appropriate Branch Personnel Office containing the following information: (1) the military service dates including the expected discharge or release date; (2) and the character of service (must be an honorable or general discharge); and (3) any qualifying service/campaign/expeditionary medals. * SF-15: If you are a disabled veteran, a Purple Heart recipient, widow/widower of a veteran, the spouse of a disabled veteran or the parent of a disabled or deceased veteran, submit a completed Standard Form (SF) 15, "Application for 10-Point Veteran Preference"; all other required documentation identified on the SF-15, in addition to the veteran's DD-214 described above. A Department of Veterans Affairs letter must contain: the Veteran's Name and Combined Service-Connected Evaluation. For a copy of the most current SF-15, Click Here. * Failure to submit all required documents at the time of application will result in the loss of claimed preference eligibility. * Resume: showing relevant experience (cover letter optional). Experience that would not normally be part of the Federal employee's position is creditable when documented by satisfactory evidence (e.g., a memorandum from the manager, Human

AREA(S) OF CONSIDERATION: Area 1: All currently employed full-time permanent and indefinite personnel of the CTANG. Area 2: All currently employed full-time temporary technician personnel and all current traditional members of the CTANG. Area 3: Individuals eligible for membership in the CTANG. Membership must be satisfied within four (4) months of selection. Help Overview * Accepting applications * Open & closing dates 04/14/2025 to 04/28/2025 * Salary $23.76 - $44.17 per hour * Pay scale & grade WG 5 - 10 * Help Location 1 vacancy in the following location: * East Granby, CT 1 vacancy * Remote job No * Telework eligible No * Travel Required Occasional travel - Subject to supervisor discretion and funding availability * Relocation expenses reimbursed No * Appointment type Permanent * Work schedule Full-time * Service Excepted * Promotion potential 10 * Job family (Series) * 5378 Powered Support Systems Mechanic * Supervisory status No * Security clearance Secret * Drug test No * Financial disclosure No * Bargaining unit status Yes * Announcement number CT-12715558-AF-25-046 * Control number 835230600 Help This job is open to * Federal employees - Excepted service Current federal employees whose agencies have their own hiring rules, pay scales and evaluation criteria. * Internal to an agency Current federal employees of the hiring agency that posted the job announcement. * National Guard and reserves Current members, those who want to join or transitioning military members. Clarification from the agency See Area of Consideration Help Duties JOB SUMMARY: The primary purpose of this position is to accomplish maintenance on electronically controlled powered support equipment containing highly complex digital devices and integrated circuits. NATIONAL GUARD MEMBERSHIP IS REQUIRED. This is an excepted position that requires membership in a compatible military assignment in the Connecticut Air National Guard. Applicants who are not currently a member of the Connecticut Air National Guard must be eligible for immediate membership and employment in the Connecticut Air National Guard. If you are not sure you are eligible for military membership, please contact a Connecticut Air National Guard recruiter at ************** before applying for this position. The major duties include, but are not limited to: * Responsible for the accurate interpretation of numerous manufacturer drawings, specifications, operating instructions, and test procedures, to troubleshoot, calibrate, align and repair a variety of highly complex pieces of powered support equipment. * Performs inspections, preventive maintenance, servicing, repair, and adjustments on complex rotary diesel engines. * Must independently determine work sequences, specifications, and special procedures to be used to fault-isolate and repair unusual problems in various pieces of powered support equipment. * Performs intermediate-level maintenance on powered support equipment and non-powered AGE. * Troubleshoots, repairs, overhauls, modifies and operates aerospace ground equipment such as AC and DC power generators, various types of internal combustion engines, air compressors, blowers, hydraulic test stands, cabin leakage testers, portable diesel engine driven generators, emergency lighting units, de-icers, heaters, load banks, hydrostatic testers, cryogenic carts, decontamination units, thermal bath, vacuum pumps, flow meters, lavatory service trailers, air conditioners and various pieces of non-powered AGE. WORKING CONDITIONS: Works indoors and outdoors, in inclement weather, on icy, wet and slippery ramps, aircraft surfaces and work stands, and in temperature and humidity extremes. Subject to the dangers from toxic fumes, oil, heat, fluids, shock, high noise level, possible cuts, abrasions and burns, extremely low temperature cryogenic liquids and extremely high air pressures. PHYSICAL EFFORT: Physical effort involves stooping, bending, stretching, standing, climbing, and working in tiring and uncomfortable positions. Requires moderate to strenuous physical exertion including pushing and shoving of wheeled AGE. Lifts heavy equipment and components weighing up to 90 pounds. Help Requirements Conditions of Employment * National Guard Membership is required. * Males born after 31 December 1959 must be registered for Selective Service. * Federal employment suitability as determined by a background investigation. * Must meet Compatible Military Assignment within one year from placement. * Wear of the military uniform is mandatory. * Direct Deposit is mandatory. * Must be able to obtain and maintain a secret security clearance. Qualifications GENERAL EXPERIENCE: Experience or training which demonstrates the knowledge of mechanical maintenance work; ability to read and use technical manuals, illustrations, diagrams and schematics, and skill in the use of equipment and hand tools used in troubleshooting, testing and repairing equipment. SPECIALIZED EXPERIENCE: Your resume and any other supporting documentation you wish to provide must clearly substantiate you currently possess 6, 12, or 18 months of specialized experience in the following: WG-05 REQUIRES 6 MONTHS: * Experience or training using common hand tools and making repetitive repairs. * Experience which demonstrates the ability to perform the simpler and routine duties of the trade. * Experience demonstrating knowledge of safety regulations and practices. WG-08 REQUIRES 12 MONTHS: * Experience or training must demonstrate a basic understanding of electrical, hydraulic, and pneumatic theory and the makeup and operation of the various individual systems and their interrelationships. * Experience using a small variety of test and measurement devices. * Experience removing, adjusting, replacing, cleaning, and installing a variety of parts, components and accessories. * Experience reading and interpreting technical manuals, blueprints, diagrams, and schematics. WG-10 REQUIRES 18 MONTHS: * Experience or training removing, adjusting, replacing, cleaning, and installing parts, components, and accessories. * Experience which provided working knowledge of mechanical, electrical, and hydraulic theory applying to powered support equipment and systems; and skill to replace, fit, install, and make adjustments. * Experience which provided working knowledge of the makeup and operation of the various individual systems maintained and their interrelationships. * Experience reading and interpreting parts lists, manufactures' repair manuals, diagrams, and electrical schematics. KNOWLEDGE, SKILLS AND ABILITIES: * Knowledge of mechanical, electrical, pneumatic and hydraulic systems and components related to electrical power production equipment and aircraft arresting systems. * Skill in troubleshooting, repairing, overhauling, or rebuilding diesel or gasoline engines, generators, starter motors, carburetors, associated generating and distributing equipment and aircraft arresting systems. * Ability and skill to read and apply technical manuals, wiring diagrams, schematic drawings and to measure and work with close tolerances in the performance of their duties. COMPATIBLE MILITARY ASSIGNMENT: All applications will be considered regardless of AFSC. Incumbent will be required to be assigned to compatible military position within 1 year of selection. The selected individual may be required to attend formal technician school training. MILITARY GRADE (Prior to Application): Enlisted: E-1 through E-6 UNIT OF ASSIGNMENT: 103d Maintenance Group or any subordinate unit Manpower Number: 1050-635 Position Sequence Number: 1017339 SPECIAL REQUIREMENTS: This position is covered by the medical monitoring program. Individual selected must undergo a preemployment physical examination prior to appointment. This position requires a security clearance (secret) which the applicant must possess or be able to obtain a clearance within one year of appointment. STATEMENT OF DIFFERENCE: Individual selected at a lower level will be issued a Statement of Difference. Predicated upon qualifications, individual could be hired at the WG-10 grade. An individual selected for this position at the lower grade will progressively be advanced to WG-10 upon achievement of required qualifications without further competition. Education No substitution of education for specialized experience. Additional information Primary Change of Station (PCS) relocation expenses will NOT be paid. To ensure compliance with an applicable preliminary nationwide injunction, which may be supplemented, modified, or vacated, depending on the course of ongoing litigation, the Federal Government will take no action to implement or enforce the COVID-19 vaccination requirement pursuant to Executive Order 14043 on Requiring Coronavirus Disease 2019 Vaccination for Federal Employees. Therefore, to the extent a Federal job announcement includes the requirement that applicants must be fully vaccinated against COVID-19 pursuant to E.O.14043, that requirement does not currently apply. Federal agencies may request information regarding the vaccination status of selected applicants for the purposes of implementing other workplace safety protocols, such as protocols related to masking, physical distancing, testing, travel, and quarantine. This position is represented by the Association of Civilian Technicians, Chapter 97. Under 32 U.S.C. 709, Veterans Preference does NOT apply. If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (***************************** Registration.aspx). MILITARY INCENTIVES - BONUSES AND STUDENT LOAN REPAYMENT PROGRAM: If you are selected for this position, you may lose your eligibility for your National Guard Enlistment/Reenlistment Bonus and Student Loan Repayment Program (incentives). In order to avoid losing your incentive eligibility, you should check with your serving incentive manager (CTARNG-G1 or CTANG-Retention Office) prior to accepting an offer for the position. For M-Day/Traditional personnel who are currently receiving incentives to include Bonuses and the Student Loan Repayment Program, the following termination rule applies: Incentive Termination without Recoupment: If you accept a Military Technician (Mil Tech) Permanent position where membership in the National Guard is a condition of employment, your bonus will be terminated with no recoupment as long as you have served at least 6 months of the bonus contract following receipt of the initial bonus payment. Read more * Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Please ensure you follow all instructions carefully. Once the application process is complete, a review of your resume and supporting documentation will be made and compared against your responses to the assessment questionnaire to determine if you are qualified for this job. Applicant must ensure resume and any other required supporting documentation clearly portrays that s/he meets the required experience level for the position. Please ensure your resume accurately reflects the duties and responsibilities under each position you have held with each employer. In describing your experience, please be clear and specific. It is your responsibility to make sure your resume states complete information for each job entry (beginning and ending dates of employment stated as MM/YYYY; and total hours worked per week). If your resume does not provide enough information regarding your work history for us to make a creditable qualification determination, your application package may be rendered disqualified and you will no longer be considered for this position. * Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new window Learn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. * Required Documents As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies. To apply for this position, you must submit a complete Application Package which includes: * Resume showing relevant experience * Responses to the Assessment Questionnaire * Unofficial Transcripts, if used to qualify (An official transcript may be required before being hired.) If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. * How to Apply To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 04/28/2025 on to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (************************************** All of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: ******************************************************* You may also check the status of your application by contacting the phone number or email address listed in the Agency Contact Information below. Agency contact information Staffing Office Phone ************ Email *************************************** Address CT 103rd Maintenance Squadron 161 Rainbow Rd East Granby, CT 06026 US Next steps Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Thank you for your interest in the Connecticut National Guard! * Fair and Transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. * Criminal history inquiries * Equal Employment Opportunity (EEO) Policy * Financial suitability * New employee probationary period * Privacy Act * Reasonable accommodation policy * Selective Service * Signature and false statements * Social security number request Help Required Documents To apply for this position, you must submit a complete Application Package which includes: * Resume showing relevant experience * Responses to the Assessment Questionnaire * Unofficial Transcripts, if used to qualify (An official transcript may be required before being hired.) If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. Help How to Apply To apply for this position, you must complete the online application and submit the documentation specified in the Required Documents section below. A complete application package must be submitted by 04/28/2025 on to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (************************************** All of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: ******************************************************* You may also check the status of your application by contacting the phone number or email address listed in the Agency Contact Information below. Read more Agency contact information Staffing Office Phone ************ Email *************************************** Address CT 103rd Maintenance Squadron 161 Rainbow Rd East Gr

Experience in retubing firetube and watertube boilers.

Seeking a highly dependable Commercial & Industrial Boilermaker to join our team in East Windsor, CT! Our Company: Blake Thermal Sales & Service Inc. is the manufacturer's rep for Cleaver Brooks and Camus boilers as well as a full-service thermal solutions company that supplies engineered products, services, and complete systems. Blake Thermal has a 95-year history of providing an array of products and services supporting steam, hot water for process and domestic heat for commercial, industrial, medical, educational and manufacturing facilities. Headquartered in East Windsor, CT, Blake Thermal maintains multiple locations across New York and New England. Sole focus on integrating and supplying engineered products, services, and complete thermal systems Longstanding relationship as a manufacturer's representative with a 95-year history Premier product supported by factory authorized local technicians For more information about our company, please visit our website via the following link: ***************************** Ideal Candidates will be in alignment with Blake Thermal's Core Values: Customer Focused Opportunity is Earned Solutions Provider Can-Do Attitude Driven to Win Confident but Humble Summary: You're smart, love to learn your trade, aren't afraid of hard work, and believe that with the right training and support, you could become a highly qualified professional. For this position, we are seeking an exceedingly ambitious associate to be trained for the role of Commercial & Industrial Boilermaker. Ideal candidates are eager to gain education and develop practical skills, participate in training on and off the jobsite, observe all safety codes, complete assessments, and carry out as assigned. To be successful as boilermaker you must have great customer service skills as well as a drive for high-quality results. Outstanding applicants are those who are quick-learners, excellent communicators and take pride in representing themselves and Blake Thermal in the most professional way. Responsibilities: Actively participate in a variety of training and educational opportunities with interim assessments. Assist within the department, developing new skills and capabilities within the Thermal Energy and Manufacturers Representative industry. Observe and adhere to all safety procedures. Complete all assignments in an efficient, timely, professional manner. Keep an open mind when receiving feedback and constructive criticism. Communication with manager and colleagues on a day to day basis. Travel to a variety of jobsites, including but not limited to commercial and industrial settings. Learn to install, maintain, and repair Commercial/Industrial Boilers and related thermal equipment. Requirements: High school diploma or GED. Connecticut G-8 License Must maintain a valid Driver's License to drive rental vehicles & be able to pass a DOT physical for driving fleet vehicles as required. A CDL is not required. Maintain company provided equipment, tools, and/or fleet vehicle as per company policy. Possess a can-do attitude when approaching new and exciting challenges. Ability to multitask. Attention to detail. Must be at least 18 years old. Pass a pre-employment drug test and criminal background check. Skilled with computers/systems. Able to read, write and possess excellent verbal communications skills in English, other languages a plus. Physical Requirements: Moderate to occasional heavy physical demand with exposure to dust in the warehouse, hot and cold climates, inside and outside exposure when on the job, odors and noise may also be present. Ability to lift up to 75 pounds. Stand, reach, bend, squat, push, pull and move about the facility or job-site. Walk or stand at least 8+ hours per day, often ascends/descends ladders or steps on job-site. Able to use hands and able to follow safety guidelines, for both mechanical tools, manual tools, and computer entry. Benefits Professional experience within the trade of Commercial Industrial Boiler Technician. Opportunity to build a career in this industry. Compensation commensurate with experience. Periodic compensation increases with completion of advanced training modules. Shadowing, mentoring, and training opportunities with seasoned professionals. This opportunity offers a competitive salary (commensurate with experience) 401k, generous health benefits, company paid life/ AD&D, company paid training with future advancement opportunities. Blake Thermal Sales & Service, Inc. is an equal opportunity and affirmative action employer. We do not discriminate by race, color, gender, sexual orientation/ gender identity, religion, ethnic or national origin, sex, age, disability status, or status as a covered veteran. Blake Thermal Sales & Service, Inc. is a proud drug-free workplace.