Maintenance Electrician Jobs in Charlotte, NC

FUNCTIONAL PURPOSE: Independently performs semiskilled preventive, corrective and predictive maintenance tasks associated with the upkeep and operation of various types of mail processing, buildings and building equipment, customer service and delivery equipment. DUTIES AND RESPONSIBILITIES: Independently performs preventive maintenance and minor repairs on plumbing, heating, refrigeration, air-conditioning low-voltage electrical systems, and other building systems and equipment. Performs preventive maintenance and routine repairs on simple control circuitry, bearings, chains, sprockets, motors, belts and belting, and other moving parts or wearing surfaces of equipment. Assembles, installs, replaces, repairs, modifies and adjusts all types of small operating equipment such as letter boxes mechanical scales, stamp vending equipment, building service equipment, mail handling equipment and related equipment. Under the direction of skilled maintenance employees, or clearly written instructions from either hard copy or electronic format, performs specific tasks related to disassembling equipment, replacing parts, relocating and reassembling equipment; assists higher level workers in locating and repairing equipment malfunctions. Maintains an awareness of equipment operation, especially excessive heat, vibration, and noise, reporting malfunctions hazards or wear to supervisor. Uses a variety of hand and power tools, gauging devices and test equipment required, or as directed, to perform the above tasks. May drive a vehicle to transport tools, equipment, employees materials or in the normal performance of assigned duties. Completes or initiates work record sheets, as required. Takes readings from meters, gauges, counters and other monitoring and measuring devices. Maintains logs and other required records; reports on breakdowns and equipment being tested. Follows established safety practices and requirements while performing all duties. May serve as a working leader over a group of lower-level employees assigned to a specific task. Performs other duties as assigned. REQUIREMENTS: KNOWLEDGE, SKILL, AND ABILITY REQUIREMENTS: This section is composed of Knowledge, Skills, Abilities (KSAs) that are required to satisfactorily perform the tasks of the position. Individuals must demonstrate that they possess a sufficient level of each KSA, to include at least minimum competency for senior-qualified positions to enable them to perform these tasks satisfactorily. Successful completion of the applicable testing and interview procedure (s) is sufficient to demonstrate the KSAs listed below. In certain circumstances, applicants may demonstrate these levels by describing examples of experience, education, or training, any of which may be non- postal. Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction 'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings. Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers. Knowledge of the National Electrical Code may be required for employees in a skilled position; this also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.). Knowledge of and ability to follow safety and security procedures for performing maintenance work. This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques. Knowledge of cleaning and lubrication materials and procedures including storage, preparation and disposal and proper Personal Protective Equipment; this includes knowledge related to: (A) Lubrication materials--such as oils, greases, etc, (B) Lubrication procedures--as in application techniques, storage, disposal, etc, This also includes knowledge related to: (A) Cleaning materials - such as alcohols, solvents, detergents, degreasers and (B) Cleaning procedures - as in hand methods, machine methods (compressed air, vacuum cleaners). Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages. Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment. Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas. Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics). Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets. Ability to communicate work related information in writing to complete forms or provide routine and technical information (e.g., in business letters, reports, e-mails, memos and technical reports/documents). Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order. Ability to speak to others in a clear, concise, and organized manner to convey information effectively; to respond to questions appropriately; to listen to what other people are saying and ask questions to ensure understanding refers to receiving/transmitting oral information (such as equipment status, recommended repairs or modifications, parts usage, and technical procedures) to/from maintenance, operations, and other personnel. Ability to adjust to new conditions, situations or technology; to move easily from one topic to another; to accept change; to be flexible with regard to viewpoint. Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect. Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately Ability to work independently; to remain focused to produce quality work under time pressure or other stressors. Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms. Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws. Knowledge and ability to use test equipment, gauges or tools to take measurements to perform maintenance work. EXAMINATION REQUIREMENTS: Applicants must successfully complete Postal Service Test 955, for the Maintenance Mechanic job group, which measures maintenance knowledge, skills and abilities. In addition, applicants must successfully complete a structured interview evaluation. PHYSICAL REQUIREMENTS: Applicants must be able to perform the physical requirements of the position with or without reasonable accommodation which may require arduous exertion involved prolonged standing, walking, bending and reaching, and may involve handling heavy objects, e.g., tools and equipment up to the allowable weight. TRAINING REQUIREMENTS: Applicants who qualify under this standard may be required to satisfactorily complete a prescribed training course(s) prior to assignment, reassignment or promotion. ADDITIONAL PROVISIONS: (A) Applicants must be able to qualify to operate powered industrial equipment. (B) For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.

Takes a leadership role to maintain a World Class Safety program and Safety Performance. Sets goals, develops and implements programs to achieve plant and business objectives. Increases on-stream time and reduce costs through improved equipment reliability. Tracks/trends reliability metrics (including TBC and costs). Effective application of preventive, predictive, and proactive tools/programs. Takes an active role in maintenance activities: Plan, conduct, analyze and summarize plant performance improvement trials. Coordinate with engineers, maintenance and operators in the implementation of new process operating conditions and procedures. Responds as required to specific equipment and performance problems. Maintains integrity of all drawings, specifications, programs, compliance/inspection records, and other documentation. Adheres to all ISO system requirements. Key Success Factors: Ability to develop and implement reliability programs to achieve business goals. Achieve cost reduction through simplification of part/component design. Increase in Plant capacity. Attributes/Skills Required/Sought: Excellent organizational, planning, and communication skills. Technical background. Strong motivator of people. Goal oriented team player. Understand impact of on-stream time on variable cost and capacity-productivity. Utilize cost benefit analysis to determine priorities. Apply Six Sigma tools to help reduce cost and increase plant capacity. Strong interpersonal communication skills w/ ability to continuously. communicate with maintenance & plant operations. Excellent organizational and communication skills. Technical competence in reliability techniques and equipment. Experience/Education Required/Sought: BS or MS in mechanical engineering with experience in highly technical operations/facility management. Product/Process development. 5-7 years' experience in Industrial/Manufacturing environment. Six Sigma Skills a plus. Mechanical Maintenance Experience a must

Our Client a global Chemical and Plastics producer near Charlotte, NC seeks a Maintenance Manager for their 100 person plant. Experience: BS Mechanical, Chemical Engineer or related with 10 - 30 years of experience with at least 5 years of management. Ideal candidates will have experience from either the Plastics Industry with knowledge of extrusion and compounding or the Chemical Process Industry. CMMS and Lean Manufacturing or Six Sigma is a plus. Duties: This Maintenance Manager will have 6-8 direct reports at this 100 non union person plant that runs 24 hours a day 5 days a week. The just applies a SAP CMMS program and this person will continue to implement it. They will also be help facilitate a lean manufacturing program. Below is the clients description. MAIN PURPOSE (Briefly state the job's overall objective) Ensure Safety and Productivity: Monitor and maintain site services and ancillary equipment to uphold safety, quality, and productivity standards. Lead Maintenance Operations: Coordinate maintenance activities across three shifts, reporting directly to the Plant Manager, to ensure efficient handling of preventative maintenance, equipment installation, and breakdown repairs. Implement Strategic Practices: Enhance equipment reliability, reduce downtime, and contribute to seamless operations through the implementation of strategic maintenance practices. Foster Efficiency and Collaboration: Implement effective maintenance strategies, ensuring sustained equipment efficiency, while fostering a collaborative environment within the maintenance team. Position is responsible for adhering to all Company safety, health, and loss control policies and procedures. Participates in safety, health and loss control training so that at a minimum a general knowledge of applicable ISRS elements, OSHA, and state requirements is maintained. Responsible for ensuring all direct reports receive required safety, health and loss control training and monitors employee's performance for compliance along with time and attendance for all shifts. DIMENSIONS OF JOB Lead and Manage maintenance team (3 shifts) Manage inventory and ordering parts Support and manage outside contractors, as needed, prioritizing safety On call expertise outside of normal working hours SCOPE OF THE JOB (i.e. Scope (Regional, Global, Local)) Local COMPLEXITY OF THE JOB (i.e. The occupant manages vendors from different geographical regions with various financial and legal conditions and the level and impact of decisions the occupant needs to make.) Within the Company Production Management, Supervision, Operators, Administration Outside the Company Contractors and Suppliers Number of subordinates (direct and indirect): 6-8 (3 shifts/5 days per week) MAIN RESPONSIBILITIES: GENERAL Operate with a “safety first” mindset prioritizing the maintenance and operations teams' safety, including but, not limited to, proper PPE, training and awareness of hazards, etc. Ensure the maintenance team achieves their allocated work priorities to meet Safety, Quality and Delivery (Production) requirements, thus minimizing production down time. Willing and able to work with the team on equipment, as needed, to support, lead and train. Identify and procure (with Purchasing support) materials and stock to ensure part availability for machine PMs and repairs. Maintain accurate records of maintenance activities, generate reports, and provide regular updates to senior management. Train, motivate and monitor the performance of maintenance personnel to ensure fully acceptable standards and maximum flexibility and cover for production shifts working. Collaborate with the management team to develop and manage the maintenance budget, ensuring cost-effective operations. Manage and resolve day-to-day issues, escalating issues to Plant Manager (as applicable) and keeping plant leadership informed of issues likely to have an impact on manufacturing output or engineering resource. Manage shortcomings in attendance and performance and take appropriated agreed action within the Company's procedures. Work to continuously improve uptime and processes by modifying PMs and recommending process improvements with Quality, Engineering and Operations. Effective organization, administration and supervision of a group of maintenance employees with Safety as the priority. Work generated mainly by production maintenance/breakdown priorities or by work allocated by superior. Situations assessed and agreed by Plant Manager Recommends spare parts and tools to purchase to ensure minimal downtime Organizes direct reports to meet priorities to ensure flexible coverage for shift operations. Allocates work and priorities of maintenance personnel, checking quality and output Assists in selection of personnel, trains new starters, motivates and monitors performance to ensure acceptable work standards. Recommends appropriate actions in the event of less than satisfactory performance. EDUCATION Bachelor's degree in Mechanical Engineering, Industrial Maintenance, or related field KNOWLEDGE REQUIRED (To perform satisfactorily in this job what types of qualifications or knowledge are required?) Electro-mechanical skills and the ability to apply experience flexibly. Proven experience as a Maintenance Manager in a manufacturing environment (preferred) Strong knowledge of compound plastics manufacturing processes and equipment (preferred) Demonstrated experience in developing and implementing preventative maintenance programs. Leadership skills with the ability to motivate and manage a diverse team. Excellent problem-solving and troubleshooting abilities. Ability to motivate team to be effective and efficient. Organization and administrative skills. EXPERIENCE REQUIRED (To perform satisfactorily in this job what types of experience is required?) Minimum of 7+ Years maintenance experience in supervisory role in relevant environment.

Job Purpose To use your unique talents, experience, skills, education and enthusiasm to complete the Operations team and to recognize that your contribution is essential to the vision of Ring Container Technologies. Ensure the safe and efficient operation of all equipment to meet or exceed company established Overall Equipment Effectiveness (OEE) expectations and customer quality expectations. Monitor equipment OEE for inefficiencies and recommend and/or make necessary improvements. Develop improvements for safer and more efficient operations. Ensure all machines guards are in place and functional. Ensure all unsafe conditions are corrected immediately. Ensure Lock out / Tag out policy is followed. Troubleshoot all major problems. Responsible for continuing/implementing the Ring Family Culture in the facility. Employees are the first priority, production is secondary. Welcome employees to the plant every day inquiring about their personal lives and showing that Ring cares about our employees. Manage by walking around during the shift initiating conversations with questions regarding the well-being of the employee. Catch someone doing something well and praise. Recognize their efforts. Understand that all employees are people and all of us have challenges. Search for the reason behind the issue, actively listen and resolve to the benefit of all. Responsible for leading and supporting employee engagement initiatives. Conduct focused walks semi-weekly through the plant to engage with the employees. Utilizing active listening skills, ask probing questions that encourage employee input on issues or opportunities related to safety, quality, performance, goals, scheduling, teamwork, etc., Note opportunities for improvement and potential solutions based on employee input. Develop strategies that all for employee led teams to implement or ‘try' Provide ongoing feedback to employee led teams and support efforts that lead to improved results, even during times of initial failure. Celebrate wins and recognize employees participating on successful teams. Educate plant personnel on safe and proper operation of machinery, ensuring all employees receive proper and timely training. Develop problem solving and troubleshooting skills in maintenance personnel. Maintain accurate and sufficient parts inventory while meeting the established budget. Order and maintain min/max inventory levels of repair and/or replacement parts. Schedule and coordinate appropriate downtime to effectively perform preventative maintenance on all equipment. Ensure equipment is clean and in ‘showroom condition'. Pro-active in addressing machine inefficiencies during preventative maintenance. Maintain Computerized Maintenance Management Software (CMMS) system. Maintain equipment files, vendor records, quotes, manuals, repair records, etc. Record maintenance and repair costs; control costs through use of appropriate repair and/or purchasing methods. Coordinate with quality personnel to ensure machines are manufacturing products that exceed customer quality expectations. Schedule and coordinate all Total Productive Manufacturing (TPM) events with maintenance and production personnel. Provide necessary training to all employees. Establish and maintain TPM standards on all equipment. Schedule events to ensure equipment meets TPM standards. Maintain employee documentation and schedule labor to meet budget requirements. Maintain performance evaluations, attendance records and review time cards. Direct the work of employees to correct improper work habits and/or behavior; reward good job performance and take corrective action as required. Communicate problems, progress reports and continuous improvement ideas to management staff, maintenance and production personnel. May perform the duties of Production Supervisor as needed or required. Support the development, implementation, maintenance and ongoing improvement of food safety, food defense, and quality systems to ensure compliance with federal, state, and local government regulatory food safety requirements and Safe Quality Food Institute (SQFI) or British Retail Consortium (BRC) standards. Ensure maintenance employees adhere to food safety, food defense, and prerequisite programs (such as security, pest control, foreign material control, allergen control, chemical control, etc.) as required. Ensure all maintenance work is performed in a food-safe manner to prevent contamination and that housekeeping duties are performed and documented according to the Master Cleaning Schedule. Foster a culture of safety, quality, and continuous improvement which proactively recognizes and addresses deficiencies. Ensure that sufficient maintenance budget is created each year to maintain a high standard of quality and food safety of the facility structure and all equipment. Experience, Educational and Technical Qualifications Our Maintenance Manager must have a minimum of 5 years supervisory experience in a manufacturing environment and a 4 year technical degree and/or equivalent military experience. He/she must have the ability to provide technical guidance through past experience and industry knowledge. He/she should possess strong people skills, leadership qualities, managerial abilities, a sense of urgency, accountability, business ethics, professionalism, self-motivation and the desire and focus to improve the business. #LI-BH1 Ring Container Technologies is an equal opportunity employer. It is the policy of Ring to apply recruiting, hiring, training, promotion, compensation and professional development practices without regard to actual or perceived race, color, religion, sex (including pregnancy, sexual orientation and gender identity), national origin, age (40 or older), disability or certain classifications based on genetic information.

Please Note: We are only accepting applicants from North Carolina. Maintenance Technician Pay: $24 to $32/hour (depending on experience) Experience: Automation experience (robotics, troubleshoot sensors, etc.) is required CNC and electrical experience is required 3+ years of experience in plant maintenance is highly preferred Education: High school diploma or GED In lieu of experience, technical training (i.e. mechatronics) may be considered Type: Full-time; Direct Hire Schedule: 2nd shift, 3 p.m. to 11 p.m. 3rd shift, 11 p.m. to 7 a.m. Greene Resources is seeking a Maintenance Technician to join a growing and dynamic team! Job Description: Survey and maintain all processes, including annual maintenance of major equipment Expedite and perform inspections, repairs and corrective actions for equipment failures Repair and maintain production machines, fixtures, tooling and facility equipment Fabricate and weld components as needed Complete work orders and collaborate with on-site equipment vendors Ensure all equipment is safe to operate, replacing or repairing guards or malfunctioning parts as necessary Use micrometers, calipers and other gauges to inspect components during assembly Operate a forklift efficiently Interpret electrical schematics and use multimeters for diagnostics and hand tools proficiently Support maintenance activities across shifts and on weekends as needed for production Adhere to OSHA safety policies, including Lockout/Tagout procedures for hazardous energy control Position Requirements: Experience with troubleshooting, repair, teardown and restoration of large CNC cells is preferred Experience with maintenance of conveyor systems and hydraulic and pneumatic assembly equipment is highly desired Interpret electrical schematics and technical drawings for troubleshooting, including PLCs Use a multimeter and hand tools proficiently to diagnose and resolve issues Maintain and troubleshoot equipment, including mills, drills, lathes and robotics (e.g., Fannic robots) Uphold OSHA safety policies, including Lockout/Tagout procedures, with prior experience preferred Support maintenance activities on night shifts, weekends and as production schedules require Demonstrate a sense of urgency to quickly restore machinery and adapt to equipment upgrades and changes Must be a self-starter, focused on efficiency and quick problem-solving Greene Resources is part of Array Corporation, the leading technology-enabled workforce solutions company whose mission is to fix how labor is bought, sold and delivered to enable universal access to the American Dream. We are proud to be an Equal Employment Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Be part of an amazing story. Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions…about inspiring stores and irresistible products…about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work. Job Overview Performs preventive and corrective maintenance on material handling equipment, including daily systems inspections of mechanical equipment to include but not limited to carton conveying equipment, pallet conveying equipment and physical building structures. Works independently on routine tasks, but also works as part of the team on projects designated by the Manager or Supervisor. Perform repairs, preventative maintenance, and changes for Power Industrial truck batteries. Perform other duties as assigned. What we can offer you Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: Merchandise discounts Performance-based incentives Annual merit review Employee Assistance Program with mental health counseling and legal/financial advice Access the full menu of benefits offerings here. What you will do Observes and listens to operating machines or equipment to diagnose machine malfunction and determine need for adjustment or repair. Reports any problems to the Manager or Supervisor. Dismantles machine or equipment to examine parts for defect or to remove defective part. Replaces defective part with new part or repairs or reproduces parts. Assembles and test operates machine to verify correction of malfunction. Maintains and lubricates machine tools and equipment. Disassembles, inspects and performs routine repairs and rebuilds of defective parts on all equipment associated with the automated warehouse. Required to install or recharge batteries for any battery-powered material handling equipment. Required to repair and maintain PIT (Powered Industrial Trucks) batteries . Required to perform Preventative Maintenance task for Battery Changers and Facility Sweepers Adheres to all maintenance safe work practices and maintains a safe working environment at all times. Removes dust, dirt, grease, and waste material from machines, and may paint machines or equipment to prevent corrosion. Performs basic electrical tasks associated with but not limited to replacing motors, fuses, and switches. Operates shop tools such as a grinder, drill press, cutting torch and welding machine to repair or join metal parts. Capable of working under the guidance of other team members. Cleans work area, tools, and equipment. Performs other routine duties. Reports the usage and replacement of equipment and parts. Must possess proficient knowledge and continuous adherence of OSHA, State and Local safety standards and the MLO Safety program standards. Perform any other function management deems essential. Regular, dependable attendance and punctuality. Foster an environment of acceptance and respect that strengthens relationships, and ensures authentic connections with colleagues, customers, and communities. Who you are High school diploma or general education degree (GED; with two years of commercial or industrial maintenance related experience and/or training; or equivalent combination of education and experience. Strong verbal and written communication skills. Must communicate with Shuttle office staff, Fleet Maintenance Adm., Receiving dock staff, Big ticket management and carriers and drivers. Adds, subtracts, and multiplies in all units of measure, using whole numbers, decimals and fractions. Must be able to work independently with minimal supervision. Works harmoniously and effectively with others as part of a team. Ability to work a flexible schedule based on department and company needs. Essential physical requirements you will perform This position involves regular walking, standing, sitting, hearing, and talking. May occasionally involve stooping, kneeling, or crouching. May involve close vision, color vision, depth perception, focus adjustment. May involve moving or lifting items up to 25 pounds. Supply Chain Only and Colleagues Working in a Supply Chain Facility except in locations governed by a Collective Bargaining Agreement: Random drug testing for all colleagues will be conducted on a monthly or semi-monthly basis, depending upon factors including but not limited to the size of the facility and the number of colleagues on roll. Colleagues will be randomly selected for testing by a third party. Testing must be completed on the same workday the colleague is informed of selection for testing, absent extenuating circumstances. In all circumstances, testing must be completed within 24 hours of notification. About Us This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Join us and help write the next chapter in our story - Apply Today! This is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to a diverse and inclusive work environment.. WAREHOUSE00 This position may be eligible for performance-based incentives/bonuses. Benefits include 401k, medical/vision/dental/life/disability insurance options, PTO accruals, Holidays, and more. Eligibility requirements may apply based on location, job level, classification, and length of employment. Additional benefit details are available at macys JOBS.com.

Maintenance Manager (Bronze Foundry) At Aalberts integrated piping systems Americas, Inc., we have the best, most complete flow control device and connection technology portfolio in the industry. Our goal is to make it an easier and better buying experience by being the only organization that offers a complete line of flow control devices and piping systems solutions. We feature a full range of connections, including push, press, thread, groove, sweat, and crimp to fit your Commercial, Industrial, and Backflow Prevention needs. At Aalberts IPSA, we recognize the importance of providing our employees with a good work environment and an excellent benefits package. Summary: The Maintenance Manager is in charge of all personnel within the maintenance department. The manager will lead; foundry OEE improvement initiatives, TPM activities, training and development of the maintenance department, and manage the repairs and maintenance spending to align with budget goals. Essential Duties and Responsibilities: Manage the maintenance team to ensure down time on machines are kept to a minimal on a day-to-day basis. Teach / Train/ Mentor the maintenance team to become more efficient. Manage preventative maintenance initiatives. Instill a culture that embraces and adheres to all company policies and regulatory requirements. Support the facility Capex planning as required to sustain and or improve the facilities. Assign work orders to the team and complete as scheduled. Review completed work orders to ensure they are completed completely and correctly. Coordinate with production managers to ensure the plant runs as smoothly as possible. Maintain adequate materials and spare parts that remain within approved budgets. Ensure safe working practices are applied to all engineering and maintenance activities by personal inspections and monitoring procedures. Monitor plant downtime and performance, initiate repairs, and make modifications as necessary. Mange Tier Boards and KPI tracking. Provide technical support for the design and installation of new equipment or modifications to existing equipment. Manage third-party maintenance contractors and ensuring they follow site procedures while work is completed. Performs a monthly facility walk through and make notes of facility condition and create work orders as required to repair all noted discrepancies. Performs casual labor properly, such as lifting/moving heavy items following appropriate safety procedures. Ensures all safety precautions are followed while performing work. Ability to multi-task and make quick decisions. Manage maintenance budget. Maintain professional relationship with all contractors, employees and managers. Support and perform job safety risk assessments. Qualifications/Requirements: Extensive mechanical and electrical experience. Advanced communication skills with ability to delegate assignments. Continue learning new technology and techniques to reduce redundancy and recommend new cost saving ideas when possible. Excellent planning and leadership abilities. Previous management experience leading a large team. Strong knowledge of safety rules and regulations. Able to function in a leadership role and interact positively and openly with employees, managers and contractors. Ability to work constructively in a fast paced, multi-tasking environment. Proficient with Microsoft Office Suite. Able to strategically plan maintenance activities to support production and minimize unnecessary spending. Desired Skills: Previous green sand foundry experience. Working knowledge of induction melt furnaces Solid expertise in developing creative solutions in a fast-paced setting. In-depth knowledge of all steps required in the installation or repair process. This includes effectively and efficiently, providing clear communication and direction, giving timely and helpful feedback to improve solutions. Ability to communicate effectively with Department Managers, Value Stream Managers and Plant Managers. Ability to meet strict deadlines within a fast-paced environment. Aalberts Integrated Piping Systems is an equal opportunity employer. At Aalberts IPS, we are committed to treating all Applicants fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law.

Welcome to Ross Stores, Inc., where our differences make us stronger… At Ross and dd's, inclusion is a way of life. We care about our Associates and the communities we serve and we value their differences. We are committed to building diverse teams and an inclusive culture. We respect and celebrate the diversity of backgrounds, identities, and ideas of those who work and shop with us. Come join us as we continue our diversity, equality and inclusion journey! GENERAL PURPOSE: To assess equipment/machinery issues in the Distribution Center, and make necessary repairs. ESSENTIAL FUNCTIONS: • Perform scheduled preventative maintenance on mechanical material handling equipment, including transportation conveyors, sortation systems, and forklifts. Perform emergency mechanical repairs to failed material handling systems • Troubleshoot electrical control systems inclusive of motors, and their associated controls to the PLC output. Must have the ability to install/setup VFD's, as well as servo motor controls, and troubleshoot peripheral control devices to the PLC input. • Perform maintenance projects on conveyor systems to include: installation, removal, and process improvement changes. • Troubleshoot and repair hydraulic and pneumatic systems. • Identify and locate required repair parts for failed systems • Maintain accurate record keeping such as: work orders, time sheets, and parts requests. COMPETENCIES: • Technical / Functional Competence • Analysis and Judgment • Planning & Organizing • Adaptability • Independence • Teamwork • Commitment • Flexibility QUALIFICATIONS AND SPECIAL SKILLS REQUIRED: • Must have the ability to read and interpret blueprints or schematics. • Must have knowledge of electrical motor control, strong electrical/mechanical skills; working with 30 - 480V. • Experience must include 5 - 8 years of progressive mechanical aptitude in a distribution or manufacturing environment. • Expertise in welding, soldering, and cutting torch skills is required. • Cognizant of the expectation to be accountable for all company assets, to include: spare parts, supplies, materials, tools, and general facility equipment. • Experience utilizing machines/equipment as follows: hand tools, drills, grinders, saws, multimeter, tachometer, welder, solderer, cutting torch, hydraulic gear puller, electric forklifts, pallet jacks, and platform lifts. • Ability to lift up to 50 lbs. • Requires overtime work as necessary. • Must be flexible to work any shift and/or weekends as scheduled. • Exhibit the ability to work independently and safely, with limited supervision. • Must be well organized, and able to complete, and perform work orders. • Will be expected to conduct all assigned tasks scheduled by supervisor. • Must place the upmost importance on working safely, and maintain a safe work environment for yourself and others, at all times. SUPERVISORY RESPONSIBILITIES: NONE DISCLAIMER: This job description is a summary of the primary duties and responsibilities of the job and position. It is not intended to be a comprehensive or all-inclusive listing of duties and responsibilities. Contents are subject to change at management's discretion. Ross is an equal employment opportunity employer. We consider individuals for employment or promotion according to their skills, abilities and experience. We believe that it is an essential part of the Company's overall commitment to attract, hire and develop a strong, talented and diverse workforce. Ross is committed to complying with all applicable laws prohibiting discrimination based on race, color, religious creed, age, national origin, ancestry, physical, mental or developmental disability, sex (which includes pregnancy, childbirth, breastfeeding and medical conditions related to pregnancy, childbirth or breastfeeding), veteran status, military status, marital or registered domestic partnership status, medical condition (including cancer or genetic characteristics), genetic information, gender, gender identity, gender expression, sexual orientation, as well as any other category protected by federal, state or local laws.

Adecco Permanent Recruitment is hiring for a Maintenance Technician I in Pageland SC for our global manufacturing client. This is a Direct Hire role. 2 Different Shifts: Sunday 10pm - 6:30am, Monday - Thursday 5pm - 3:30AM - Fridays if production runs 3pm - 11:30am Sunday 10pm - 6:30am, Monday - Thursday 7pm - 5:30AM - Friday is production runs 3pm - 11:30am Responsibilities - Previous foundry maintenance experience a plus. Responsible for anything from general masonry, plumbing, rough carpentry, painting, welding, or building maintenance. Able to install and maintain a variety of mechanical or electrical equipment. This will include repairs, maintaining machinery, mechanical equipment, diagnostic analysis, and complex electrical controls. Ability to wire complicated electrical equipment such as automatic controls. Extremely proficient with diagnostic analysis on multiple numerical control systems. Able to review and understand diagrams, sketches, and manuals when needing assistance. Will perform general construction maintenance when necessary. Knowledgeable with tools or tooling that the maintenance team uses each day to complete jobs. Responsible for keeping the work area clean at all times. Follow and obey all safety rules while wearing required safety equipment. Qualifications - High School Diploma or GED required. Associates Degree in Industrial Maintenance preferred. Can accurately use all precision instruments and read blueprints pertaining to the work being performed. Able to use math calculations such as addition, subtraction, multiplication, and division. Able to train and mentor junior maintenance personnel. Required Skills - Eight to ten years of electrical or maintenance experience in an industrial setting preferred. Ability to use precision instruments and read blueprints. Ability to communicate effectively between multiple department supervisors. Can step in and assume operations in the absence of a supervisor. Ability to meet strict deadlines within a fast-paced environment. Previous experience in a maintenance role within a manufacturing setting. High attention to detail and escalate errors to management when needed. Must be able to stand for long periods at a time. Able to work with arms extended above shoulder level, climb ladders, and work at different heights. Possess the ability to push and pull frequently. Frequent bending at the waist. Must be able to lift 60 lbs. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to ******************************************* The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: *The California Fair Chance Act* Los Angeles City Fair Chance Ordinance * Los Angeles County Fair Chance Ordinance for Employers * San Francisco Fair Chance Ordinance

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, noosa, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance. Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Summary The Electrician is responsible for troubleshooting and maintaining existing electrical system infrastructure (facilities and production equipment) to ensure safe and reliable electrical equipment and infrastructure is provided for all employees, contractors, etc. Essential Job Duties Performs basic functions such as running conduit and piping to specifications, pulling wire, and completing terminations. Performs troubleshooting and completes repairs necessary to single phase and 3 phase power electrical and controls systems. Completes calibration and set-up of instrumentation devices and transmitters. Understands and interprets technical documents and diagrams which include but are not limited to: factory manuals, blueprints, schematics, Single Line Electrical Drawings, mechanical and electrical equipment schematics, pneumatics, hydraulics, and Process and Instrumentation Diagrams (P&IDs), etc. Understands and uses code for troubleshooting Programmable Logic Controllers (PLCs), Human Machine Interfaces (HMIs), Variable Frequency Drives (VFDs), Servo controllers, etc. Applies industry knowledge to identify aging and obsolete automation hardware. Understands and adheres to governmental regulatory programs and policies. These may include but are not limited to National Electrical Code, Environmental Protection Agency (EPA), Uniform Building Code (UBC), National Fire Protection Association (NFPA) 70, National Electric Code, NFPA 70B Electrical Maintenance, NFPA 70E Arc Flash Electrical Safety, NFPA 79 Electrical Standard For Industrial Machinery and local government environmental agency policies. Practices and complies with all plant and maintenance department safety procedures, including but not limited to: Lock-Out - Tag-Out; Arc Flash and Hot Work Permits. Understands the concept of Permit Required Confined Spaces and assists with proper alternate entry of re-classified confined spaces when necessary. Follows all applicable good manufacturing practices (GMP's) for area assigned. Maintains and uses appropriate personal protective equipment (PPE) in accordance with OSHA, food handling before and after equipment inspection and repair activities. Attends classes, seminars, and in-house training as needed to maintain skill level with changes in the industry. Makes improvements and suggestions to optimize maintenance program. Executes and document planned and unplanned work findings and data during shift via computerized maintenance management system (CMMS). Execution and resolution of equipment breakdowns/repairs. Leverages methodologies including, but not limited to: root cause analysis (RCA), break down failure analysis (BDA) and cause maps to identify and resolve equipment issues. Utilizes predictive maintenance technologies to identify failures and takes correct follow-up actions. Predictive maintenance technologies include ultrasound, thermal imaging, Electrical and current analysis. Documents the cause of the failure and works with maintenance team, planner, supervisor, or other team members to take action to prevent a reoccurrence of the failure. May perform other duties as required. Statement of Coverage N/A Scope of Responsibility This position does not have direct supervisory responsibilities. Knowledge and Skill Requirements Read, comprehends, and carries out detailed written or oral instructions, correspondence, and memos. Write and present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Communicate/interact with all levels of employees in a professional manner. Work and function as a team member in a team based environment. Must have experience with the proper use of and interpretation of information collected through electrical diagnostic tools such as a Fluke Mulitmeter, ohmmeter, meggar, and other hardware used in the troubleshooting and diagnosis of electrical and controls problems in an industrial environment. Perform simple arithmetic functions including addition, subtraction, multiplication, and division of whole numbers, decimals, fractions, and mixed numbers. Measure using devices. Convert measurements from feet/inches to decimals and vice versa. Draw and interpret bar graphs. Use a computer for data entry and documentation of maintenance findings on work orders. In some cases, upload and download of technical manuals and specifications from CMMS or internet. Must be able to use a basic calculator Effectively work and function in a team based collaborative environment. Requires attention to detail, mechanical ability and ability to multi-task. Must be able to make good decisions under pressure. Ability to resolve problems involving multiple variables in high stress situations. Education and Experience High School Diploma or GED; a minimum of 2 years of experience in a manufacturing facility (Food & Beverage preferred) performing electrical maintenance duties, inspections, troubleshooting and repairs required. Where applicable, must pass an electrical comprehension test. Preferred Qualifications: Some college or formal technical school education with demonstrated aptitude and skills in electrical maintenance and troubleshooting. Experience with mechanical, pneumatic, hydraulic, steam and chiller applications. 4+ years of experience as an Industrial maintenance electrician. Professional Licenses or Certifications Obtain and maintain all applicable state permits and/or licenses. Must be forklift certified or able to obtain forklift, aerial lifts certification. Valid Driver's License required. Physical Demands Sitting: Occasionally Standing: Frequently Walking: Frequently Driving: Seldom Using hands: Continuously Climbing: Frequently Stooping, Kneeling: Frequently Talking, Hearing: Frequently Tasting, Smelling: Occasionally Weight: Up to 10 pounds: Frequently Up to 25 pounds: Frequently Up to 50 pounds: Occasionally More than 50 pounds with assistance: Occasionally More than 100 lbs: Occasionally Work Environment Subject to indoor facility and outdoor weather conditions, dust, noise, heat/cold. Lighting: Good Temperature: Fair Ventilation: Good Vibration: Fair Noise: Fair Travel Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

General Description The Electrical Maintenance Technician will be responsible for the installation, troubleshooting and maintenance of electrical components within asphalt plants and aggregate crushing facilities. * Installation, troubleshooting, and maintaining PLC's, HMI interfaces, motors, drives, other electrical components. * Test and repair of various electrical equipment. * Assist in facility startup and new equipment installations. * Involvement in the planning and execution of new wiring installations or upgrades. * Work with facility staff and mechanical department to create more operator friendly and robust systems. * Ability to effectively work within and maintain company safety standards and policies. * Other duties as assigned Qualification Requirements * General. To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Education and Experience. This position is not typically an entry-level role as it requires basic electrical knowledge. * Minimum of one (13) to three (3) years of experience troubleshooting electrical/mechanical systems is required. * Must have a safety and quality focused mindset. * Journeyman or master electrician license is preferred. * Must be familiar with and understand National Electric Code standards. * Strong verbal and written communication skills and ability to work independently or in a team environment. * Willingness to learn new processes and ability to teach facility personnel. * Physical Demands. The following physical demands are representative of those that must be met by an Electrical Maintenance Technician to successfully perform the essential functions of this job. * Regularly required to sit and/or stand during a regular work shift of at least eight hours per day. * Employee is occasionally required to stoop, bend, walk, crouch, and climb. * Ability to lift, on a frequent basis, at least 25 pounds and carry up to 15 pounds. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * Continuous mental attention required to complete tasks in an efficient manner. * Exposure to dust, dirt grease and noise. * Frequently walk on uneven surfaces, including natural ground and slopes in varying weather conditions. * Must be able to work a flexible schedule, based on project need(s) and demand(s). * Work Environment. The work environment characteristics described below are representative of those that an Electrical Maintenance Technician encounters while performing the essential functions of this job. * Work is performed indoors and outdoors in all weather conditions. * Must be able to work flexible and long hours as required. * Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction site. * Employee regularly works near heavy equipment and moving machinery. * Work may involve a variety of substances commonly found on a construction site such as oil, grease, curing compounds, gasoline, diesel fuel and asphalt. Company Benefits * Medical & Vision Insurance * Dental Insurance * Basic Life and AD&D Insurance * Short Term Disability * Voluntary Term Life * Long Term Disability * Sick Leave * Paid Vacation & Holiday Pay * 401(k) Plan * Additional Benefits including wellness coaching, etc. * Continuing Education Assistance We promote a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply. Blythe Construction, Inc. - Hubbard Construction Company - Northeast Paving - Sunmount Paving - Virginia Paving Company, are hereby referred to as Vinci Construction USAAccessibility: If you need an accommodation as part of the employment process please contact Human Resources at Blythe Construction, Inc.: Phone: ************Hubbard Construction Company: Phone: ************Eurovia Atlantic Coast, LLC:Phone: ************ Vinci Construction USA is an Equal Opportunity Employer.Vinci Construction USA is committed to providing a fair and equal employment opportunity workplace. All hiring and promotional decisions are made without regard to race, color, religion, sex (including pregnancy), genetic information, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other status that is protected by federal, state, or local law. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

Fountain Services, LLC (****************************** is seeking a highly qualified and experienced individual for the position of Service Electrician. We offer competitive pay and, after a 90-day introductory period, health, dental, vision, life, and disability insurance, as well as a 401k with employer match. Fountain Services, LLC is an established industry leader in the electrical trade with offices in Spindale, Charlotte, Hickory, and Asheville, in North Carolina, and in Greenville, South Carolina. We serve customers and projects spread across the western, piedmont, and metrolina regions of North Carolina, and the upstate of South Carolina. Over the course of our 75-year history, we have built our reputation as a company focused on the training, development, and personal growth of our workforce. We are seeking candidates with a commitment and desire to continue their own career development, and who are a fit for a company culture based upon core values of honesty and integrity, mutual respect, pursuit of excellence, and personal accountability. If this describes you, we want to help you maximize your potential. Minimum Experience Requirements for Service Electrician 5+ years in the electrical service field, including commercial/industrial maintenance or service. Other relevant experience would be work in the fields of HVAC, plumbing, lighting/appliance repair, and low voltage or telecommunication installations. Additional Requirements and/or Expectations for Service Electrician Applicants must possess High School diploma or GED. Applicants must pass a mandatory drug screen. Fountain has built its reputation by holding its employees to the highest standards of professionalism and personal conduct. We strictly adhere to the following four keys to success: Show up every day on time. Appreciate instruction from leaders. Let you work ethic speak for you. Retain knowledge. Position Overview for Service Electrician Specific job duties/responsibilities include the following: Industrial, commercial, and residential electrical systems repair, maintenance, and installation Troubleshooting Customer service Ability to handle service contracts, work orders, change orders, and billings Daily, weekly, and/or monthly reporting as requested by the department manager Periodic support of the company's commercial construction operations as needed Increasing and/or promoting the company's visibility and image in the community Additional duties as may be assigned from time to time by the department manager Above all, the Service Technician will be expected to fully embrace the Fountain Electric culture, and represent our company and its values to our customers and the public. In short, this person is expected to lead by example and rigorously uphold our organizational values. He or she must adhere to the highest standards of professionalism and performance.

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, noosa, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance. Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Summary The Electrician is responsible for troubleshooting and maintaining existing electrical system infrastructure (facilities and production equipment) to ensure safe and reliable electrical equipment and infrastructure is provided for all employees, contractors, etc. Essential Job Duties * Performs basic functions such as running conduit and piping to specifications, pulling wire, and completing terminations. * Performs troubleshooting and completes repairs necessary to single phase and 3 phase power electrical and controls systems. * Completes calibration and set-up of instrumentation devices and transmitters. * Understands and interprets technical documents and diagrams which include but are not limited to: factory manuals, blueprints, schematics, Single Line Electrical Drawings, mechanical and electrical equipment schematics, pneumatics, hydraulics, and Process and Instrumentation Diagrams (P&IDs), etc. * Understands and uses code for troubleshooting Programmable Logic Controllers (PLCs), Human Machine Interfaces (HMIs), Variable Frequency Drives (VFDs), Servo controllers, etc. * Applies industry knowledge to identify aging and obsolete automation hardware. * Understands and adheres to governmental regulatory programs and policies. These may include but are not limited to National Electrical Code, Environmental Protection Agency (EPA), Uniform Building Code (UBC), National Fire Protection Association (NFPA) 70, National Electric Code, NFPA 70B Electrical Maintenance, NFPA 70E Arc Flash Electrical Safety, NFPA 79 Electrical Standard For Industrial Machinery and local government environmental agency policies. * Practices and complies with all plant and maintenance department safety procedures, including but not limited to: Lock-Out - Tag-Out; Arc Flash and Hot Work Permits. * Understands the concept of Permit Required Confined Spaces and assists with proper alternate entry of re-classified confined spaces when necessary. * Follows all applicable good manufacturing practices (GMP's) for area assigned. * Maintains and uses appropriate personal protective equipment (PPE) in accordance with OSHA, food handling before and after equipment inspection and repair activities. * Attends classes, seminars, and in-house training as needed to maintain skill level with changes in the industry. * Makes improvements and suggestions to optimize maintenance program. * Executes and document planned and unplanned work findings and data during shift via computerized maintenance management system (CMMS). Execution and resolution of equipment breakdowns/repairs. * Leverages methodologies including, but not limited to: root cause analysis (RCA), break down failure analysis (BDA) and cause maps to identify and resolve equipment issues. * Utilizes predictive maintenance technologies to identify failures and takes correct follow-up actions. Predictive maintenance technologies include ultrasound, thermal imaging, Electrical and current analysis. * Documents the cause of the failure and works with maintenance team, planner, supervisor, or other team members to take action to prevent a reoccurrence of the failure. * May perform other duties as required. Statement of Coverage N/A Scope of Responsibility This position does not have direct supervisory responsibilities. Knowledge and Skill Requirements * Read, comprehends, and carries out detailed written or oral instructions, correspondence, and memos. * Write and present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Communicate/interact with all levels of employees in a professional manner. Work and function as a team member in a team based environment. * Must have experience with the proper use of and interpretation of information collected through electrical diagnostic tools such as a Fluke Mulitmeter, ohmmeter, meggar, and other hardware used in the troubleshooting and diagnosis of electrical and controls problems in an industrial environment. * Perform simple arithmetic functions including addition, subtraction, multiplication, and division of whole numbers, decimals, fractions, and mixed numbers. Measure using devices. Convert measurements from feet/inches to decimals and vice versa. Draw and interpret bar graphs. * Use a computer for data entry and documentation of maintenance findings on work orders. In some cases, upload and download of technical manuals and specifications from CMMS or internet. Must be able to use a basic calculator * Effectively work and function in a team based collaborative environment. * Requires attention to detail, mechanical ability and ability to multi-task. Must be able to make good decisions under pressure. * Ability to resolve problems involving multiple variables in high stress situations. Education and Experience High School Diploma or GED; a minimum of 2 years of experience in a manufacturing facility (Food & Beverage preferred) performing electrical maintenance duties, inspections, troubleshooting and repairs required. Where applicable, must pass an electrical comprehension test. Preferred Qualifications: Some college or formal technical school education with demonstrated aptitude and skills in electrical maintenance and troubleshooting. Experience with mechanical, pneumatic, hydraulic, steam and chiller applications. 4+ years of experience as an Industrial maintenance electrician. Professional Licenses or Certifications Obtain and maintain all applicable state permits and/or licenses. Must be forklift certified or able to obtain forklift, aerial lifts certification. Valid Driver's License required. Physical Demands * Sitting: Occasionally * Standing: Frequently * Walking: Frequently * Driving: Seldom * Using hands: Continuously * Climbing: Frequently * Stooping, Kneeling: Frequently * Talking, Hearing: Frequently * Tasting, Smelling: Occasionally Weight: * Up to 10 pounds: Frequently * Up to 25 pounds: Frequently * Up to 50 pounds: Occasionally * More than 50 pounds with assistance: Occasionally * More than 100 lbs: Occasionally Work Environment * Subject to indoor facility and outdoor weather conditions, dust, noise, heat/cold. * Lighting: Good * Temperature: Fair * Ventilation: Good * Vibration: Fair * Noise: Fair Travel Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

WB Moore is a privately-owned company headquartered in Charlotte, NC and continues to be an industry leader specializing in ELECTRICAL PROJECTS in multiple states. WB Moore thrives on dynamic, complex assignments using cutting edge technology. WB Moore delivers innovative design work to better serve the needs of our customers. We are currently looking for a Service Electrician in Charlotte, NC! If you are interested in the position outlined below, please apply, and we will work with you to find the best fit! Our company offers a competitive salary, a comprehensive benefits package, career training and advancement, and the opportunity to work on high-profile projects in the Charlotte Metro and surrounding areas. WE OFFER MANY INCENTIVES FOR THIS ROLE INCLUDING A SIGN-ON BONUS, ON-CALL COMPENSATION, AND SHIFT PREMIUMS. Description The Service Electrician at the WB Moore Company must be a customer-oriented individual, with the ability to perform a variety of support activities in the service function. They will assess and respond to situations using standard procedures and report design, reliability and maintenance problems to the Project Management team. Responsibilities Provide service and customer support while visiting field or customer sites Tie workflow to schedule Manage all on-site installation, repair, maintenance and test tasks Diagnose errors or technical problems and determine proper solutions Produce timely and detailed service reports Document processes Follow all WB Moore's procedures and protocols Comprehend customer requirements and make appropriate recommendations Build positive relationships with clients Job Qualifications/Skillset The Service Electrician must be customer oriented & well-mannered Flexible with scheduling and traveling (Some nights & weekend work) Must be able to troubleshoot The proper candidate will be an independent thinker/worker and will be able to take on tasks and projects without being micromanaged Education & Certifications/Experience: 8-10 years of ELECTRICAL experience High School Graduate/GED OSHA 30 NFPA70E/Arc Flash Training Certified and comfortable using lift equipment Benefits of joining our team Privately Owned Opportunity for Growth Competitive Pay We invest in our team by providing training opportunities Safety First “mantra” with regards to our team Job Stability -Year round work! Medical, Dental, Vacation, Holidays WB Moore Company of Charlotte, Inc. is an equal opportunity employer. Our success directly reflects the skills, experience, and dedication to our people. To help them succeed, we strive to provide a positive, productive work environment based upon both mutual respect and a commitment to compliance with all federal, state, and local laws. We recruit, hire, train, and promote employees without discriminating on the basis of race, color, religion, gender, national origin, marital status, age, disability, or veteran status. All of our employees share the responsibility for supporting our policies for a harassment-free and drug-free workplace.

Looking for a rewarding job that's also FUN? Carowinds offers convenient hours for anyone seeking an awesome opportunity. Our jobs can lead to a successful future by developing resume-building skills as well as gaining knowledge through training and work experience. Our associates are enthusiastic about their work because they create fun and memories to last lifetime! They also enjoy: Casual work attire (uniform provided) FREE admission to Carowinds and other Cedar Fair parks Discounts on food and retail items A fun and engaging work environment, perfect for making friends Flexible work schedule Responsibilities: Assist with plumbing maintenance. Responsible for pool cleanliness, water quality in Waterpark and the Campground pool. Operate wash and rapid sand filters. Test pool water and maintain records. Control the free, total, combined chlorine level and pH using appropriate chemicals. Sweeps and cleans pool areas (to include grates in the pool) throughout the facility using broom, mop, brush, vacuum, squeegee or hand, stores equipment and supplies in proper place. Monitors and takes action to ensure attraction, location and back area cleanliness. Clean "kiddy play" structures to remove oxidation and maintain the appearance of these structures. Swim in depths of 4' to 8' to clean sides and bottom of pool areas. Move pumps from storage area to work location. Scrub pool tile to remove scum and build up. Provides guest service according to Cedar Fair standards when serving the guest or working with subordinates, including initiating guest interactions, answering questions and giving directions. Maintains cleanliness and safety in assigned work area and performs all duties in compliance with Cedar Fair Safety guidelines and requirements and reports all unsafe or unusual conditions to supervision. Meets scheduling availability requirements, including nights, weekends, and holiday periods to meet business needs. Meets Cedar Fair's attendance requirements as outlined in Cedar Fair's attendance policies. Adheres to Cedar Fair's Rules of Conduct including specific costuming and grooming standards as outlined in Employee Guidelines and other park/division specific policies and procedures. Other duties may be assigned. Qualifications: Ability to supply and use general maintenance tools Ability to demonstrate general mechanical knowledge. Ability to work nights, weekends and holiday periods to meet business needs. Ability to pass a mandatory (or random) drug test, per Company policy, unless prohibited by state or provincial law. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law. Driver's License Our associates are crucial to providing guests with a variety of engaging activities that reflect and uphold our five core values of Courtesy, Service, Cleanliness, Safety, and Integrity and promote inclusion among all associates.

Maintenance Technician Pay: $24.87 to $31.16/hour (+$0.20 for 2nd shift and $0.40/hour for 3rd shift!) Experience: 3+ years of experience in plant maintenance is highly preferred. CNC experience is a plus. Education: High school diploma or GED required. In place of direct experience, technical training (e.g., mechatronics) will be considered. Type: Full-time; Contract Schedule: 2nd & 3rd shift available Greene Resources is seeking a Maintenance Technician to join a growing and dynamic team! Job Description: Regularly survey all processes, including annual maintenance for major equipment. Respond promptly to equipment failures with inspections and corrective actions. Troubleshoot, repair, teardown, and restore large CNC cells (preferred experience). Maintain conveyor systems and hydraulic/pneumatic assembly equipment. Perform repairs on production machines, fixtures, tooling, and facility equipment. Fabricate and weld components as needed. Complete work orders and collaborate with on-site equipment vendors. Ensure equipment safety by replacing or repairing machine guards and malfunctioning equipment. Use micrometers, calipers, and other gauges for inspecting components during assembly. Operate forklifts, interpret electrical schematics, and use multimeters for diagnostics. Position Requirements: Ability to troubleshoot PLC systems. Strong electrical experience. Proficient in reading schematics. Experience with automation, including robotics and troubleshooting sensors. Prior exposure to Lockout/Tagout procedures. Greene Resources does not just connect you with a job; we offer a Professional Mentoring & Education Program to help you be great at your job, love it, and grow. Greene Resources is part of Array Corporation, the leading technology-enabled workforce solutions company whose mission is to fix how labor is bought, sold and delivered to enable universal access to the American Dream. We are proud to be an Equal Employment Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Be part of an amazing story. Macy's is more than just a store. We're a story. One that's captured the hearts and minds of America for more than 160 years. A story about innovations and traditions…about inspiring stores and irresistible products…about the excitement of the Macy's 4th of July Fireworks, and the wonder of the Thanksgiving Day Parade. We've been part of memorable moments and milestones for countless customers and colleagues. Those stories are part of what makes this such a special place to work. Job Overview Maintenance Mechanics performs preventive and corrective maintenance on material handling equipment, including daily systems inspections of mechanical and electrical components to include but not limited to material handling equipment, powered equipment and physical building structures. What we can offer you Join a team where work is as rewarding as it is fun! We offer a dynamic, inclusive environment with competitive pay and benefits. Enjoy comprehensive health and wellness coverage and a 401(k) match to invest in your future. Prioritize your well-being with paid time off and eight paid holidays. Grow your career with continuous learning and leadership development. Plus, build community by joining one of our Colleague Resource Groups and make a difference through our volunteer opportunities. Some additional benefits we offer include: Merchandise discounts Performance-based incentives Annual merit review Employee Assistance Program with mental health counseling and legal/financial advice Access the full menu of benefits offerings here. What you will do Observes and listens to operating machines or equipment to diagnose machine malfunction and determine need for adjustment or repair. Trouble shoot and repair material handling equipment including sorters and conveyors. Identify problems requiring outside vendors and inform the Manager or Supervisor. Performs preventative maintenance on material handling equipment, including daily systems inspections of mechanical, hydraulic and electrical components. Reports any problems to the Manager or Supervisor. Utilize the computerized maintenance management system. Monitors, reports, and documents the usage and replacement of equipment and parts. Dismantles machine or equipment to examine parts for defect or to remove defective part. Replaces defective part with new part or repairs or reproduces parts. Assembles and test operates machine to verify correction of malfunction. Maintains and lubricates machine tools and equipment. Performs preventative maintenance on facility; carpentry, plumbing, and electrical duties. Knowledge of operation and safe storage practices of ARC and MIG welding equipment to include OXY/ACETYLENE, and PLASMA welding and cutting. Maintain a safe working environment at all times. Report possible safety concerns to the Manager or Supervisor. Assembles and test operates machine to verify correction of malfunction. Maintains and lubricates machine tools and equipment. Disassembles, inspects and performs routine repairs and rebuilds of defective parts on all equipment associated with the automated warehouse. May be required to install or recharge batteries for any battery-powered material handling equipment. Adheres to all maintenance safe work practices and maintains a safe working environment at all times. Removes dust, dirt, grease, and waste material from machines, and may paint machines or equipment to prevent corrosion. Performs basic electrical tasks associated with but not limited to replacing motors, fuses, and switches. Foster an environment of acceptance and respect that strengthens relationships, and ensures authentic connections with colleagues, customers, and communities. Who you are High School Diploma or equivalent required. 1-2 years direct experience. Commercial or industrial maintenance related experience and/or training; or equivalent combination of education and experience. Ability to read and interpret instructional documents such as safety rules, operating and maintenance instructions, and procedural manuals. Resourceful self-starter, works well independently as well as part of a team. Must be proficient in the use of computers and handheld technology. Ability to work a flexible schedule, including day, evening, weekends, and/or holidays. Essential physical requirements you will perform Position requires prolonged periods of standing/walking around store or department. May involve reaching, crouching, kneeling, stooping, climbing ladders, depth perception and color vision. Frequent use of computers and other technology necessary to perform job duties, including handheld electronic equipment. Frequently lift/move up to 50lbs. Supply Chain Only and Colleagues Working in a Supply Chain Facility except in locations governed by a Collective Bargaining Agreement: Random drug testing for all colleagues will be conducted on a monthly or semi-monthly basis, depending upon factors including but not limited to the size of the facility and the number of colleagues on roll. Colleagues will be randomly selected for testing by a third party. Testing must be completed on the same workday the colleague is informed of selection for testing, absent extenuating circumstances. In all circumstances, testing must be completed within 24 hours of notification. About Us This is a great time to join Macy's! Whether you're helping a customer find the perfect gift, streamlining operations in one of our distribution centers, enhancing our online shopping experience, buying in-style and on-trend merchandise to outfit our customers, or designing a balloon for the Thanksgiving Day Parade, we offer unique opportunities to be part of some of the most memorable moments in people's lives. Join us and help write the next chapter in our story - Apply Today! This is not all-inclusive and may not apply to colleagues covered by a collective bargaining agreement. Macy's Inc. reserves the right to amend this job description at any time. Macy's Inc. is an Equal Opportunity Employer, committed to a diverse and inclusive work environment.. SUPPLY00 This position may be eligible for performance-based incentives/bonuses. Benefits include 401k, medical/vision/dental/life/disability insurance options, PTO accruals, Holidays, and more. Eligibility requirements may apply based on location, job level, classification, and length of employment. Additional benefit details are available at macys JOBS.com.

Since 1869 we've connected people through food they love. Our history was created by remarkable people, ideas, and innovations. It serves as inspiration and foundation for our future success. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Michael Angelo's, noosa, Pace, Pacific Foods, Prego, Rao's Homemade, Swanson, and V8. In our Snacks division, we have brands like Cape Cod, Goldfish, Kettle Brand, Lance, Late July, Pepperidge Farm, Snack Factory, and Snyder's of Hanover. We foster a culture of belonging where people come first, and diversity is embraced. And we live our values, always, while setting the highest standards for performance. Here, you will make a difference every day. You will be part of a dynamic, collaborative, and competitive team. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. Job Summary The Electrician is responsible for troubleshooting and maintaining existing electrical system infrastructure (facilities and production equipment) to ensure safe and reliable electrical equipment and infrastructure is provided for all employees, contractors, etc. Essential Job Duties Performs basic functions such as running conduit and piping to specifications, pulling wire, and completing terminations. Performs troubleshooting and completes repairs necessary to single phase and 3 phase power electrical and controls systems. Completes calibration and set-up of instrumentation devices and transmitters. Understands and interprets technical documents and diagrams which include but are not limited to: factory manuals, blueprints, schematics, Single Line Electrical Drawings, mechanical and electrical equipment schematics, pneumatics, hydraulics, and Process and Instrumentation Diagrams (P&IDs), etc. Understands and uses code for troubleshooting Programmable Logic Controllers (PLCs), Human Machine Interfaces (HMIs), Variable Frequency Drives (VFDs), Servo controllers, etc. Applies industry knowledge to identify aging and obsolete automation hardware. Understands and adheres to governmental regulatory programs and policies. These may include but are not limited to National Electrical Code, Environmental Protection Agency (EPA), Uniform Building Code (UBC), National Fire Protection Association (NFPA) 70, National Electric Code, NFPA 70B Electrical Maintenance, NFPA 70E Arc Flash Electrical Safety, NFPA 79 Electrical Standard For Industrial Machinery and local government environmental agency policies. Practices and complies with all plant and maintenance department safety procedures, including but not limited to: Lock-Out - Tag-Out; Arc Flash and Hot Work Permits. Understands the concept of Permit Required Confined Spaces and assists with proper alternate entry of re-classified confined spaces when necessary. Follows all applicable good manufacturing practices (GMP's) for area assigned. Maintains and uses appropriate personal protective equipment (PPE) in accordance with OSHA, food handling before and after equipment inspection and repair activities. Attends classes, seminars, and in-house training as needed to maintain skill level with changes in the industry. Makes improvements and suggestions to optimize maintenance program. Executes and document planned and unplanned work findings and data during shift via computerized maintenance management system (CMMS). Execution and resolution of equipment breakdowns/repairs. Leverages methodologies including, but not limited to: root cause analysis (RCA), break down failure analysis (BDA) and cause maps to identify and resolve equipment issues. Utilizes predictive maintenance technologies to identify failures and takes correct follow-up actions. Predictive maintenance technologies include ultrasound, thermal imaging, Electrical and current analysis. Documents the cause of the failure and works with maintenance team, planner, supervisor, or other team members to take action to prevent a reoccurrence of the failure. May perform other duties as required. Scope of Responsibility This position does not have direct supervisory responsibilities. Knowledge, Skills, and Abilities Read, comprehends, and carries out detailed written or oral instructions, correspondence, and memos. Write and present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Communicate/interact with all levels of employees in a professional manner. Work and function as a team member in a team based environment. Must have experience with the proper use of and interpretation of information collected through electrical diagnostic tools such as a Fluke Mulitmeter, ohmmeter, meggar, and other hardware used in the troubleshooting and diagnosis of electrical and controls problems in an industrial environment. Perform simple arithmetic functions including addition, subtraction, multiplication, and division of whole numbers, decimals, fractions, and mixed numbers. Measure using devices. Convert measurements from feet/inches to decimals and vice versa. Draw and interpret bar graphs. Use a computer for data entry and documentation of maintenance findings on work orders. In some cases, upload and download of technical manuals and specifications from CMMS or internet. Must be able to use a basic calculator Effectively work and function in a team based collaborative environment. Requires attention to detail, mechanical ability and ability to multi-task. Must be able to make good decisions under pressure. Ability to resolve problems involving multiple variables in high stress situations. Education and Experience High School Diploma or GED; a minimum of 2 years of experience in a manufacturing facility (Food & Beverage preferred) performing electrical maintenance duties, inspections, troubleshooting and repairs required. Where applicable, must pass an electrical comprehension test. Preferred Qualifications: Some college or formal technical school education with demonstrated aptitude and skills in electrical maintenance and troubleshooting. Experience with mechanical, pneumatic, hydraulic, steam and chiller applications. 4+ years of experience as an Industrial maintenance electrician. Professional Licenses or Certifications Obtain and maintain all applicable state permits and/or licenses. Must be forklift certified or able to obtain forklift, aerial lifts certification. Valid Driver's License required. Physical Demands Sitting: Occasionally Standing: Frequently Walking: Frequently Driving: Seldom Using hands: Continuously Climbing: Frequently Stooping, Kneeling: Frequently Talking, Hearing: Frequently Tasting, Smelling: Occasionally Weight: Up to 10 pounds: Frequently Up to 25 pounds: Frequently Up to 50 pounds: Occasionally More than 50 pounds with assistance: Occasionally More than 100 lbs: Occasionally Work Environment Subject to indoor facility and outdoor weather conditions, dust, noise, heat/cold. Lighting: Good Temperature: Fair Ventilation: Good Vibration: Fair Noise: Fair Travel Required To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Fountain Services, LLC (****************************** is seeking a highly qualified and experienced individual for the position of Service Electrician. We offer competitive pay and, after a 90-day introductory period, health, dental, vision, life, and disability insurance, as well as a 401k with employer match. Fountain Services, LLC is an established industry leader in the electrical trade with offices in Spindale, Charlotte, Hickory, and Asheville, in North Carolina, and in Greenville, South Carolina. We serve customers and projects spread across the western, piedmont, and metrolina regions of North Carolina, and the upstate of South Carolina. Over the course of our 75-year history, we have built our reputation as a company focused on the training, development, and personal growth of our workforce. We are seeking candidates with a commitment and desire to continue their own career development, and who are a fit for a company culture based upon core values of honesty and integrity, mutual respect, pursuit of excellence, and personal accountability. If this describes you, we want to help you maximize your potential. Minimum Experience Requirements for Service Electrician 5+ years in the electrical service field, including commercial/industrial maintenance or service. Other relevant experience would be work in the fields of HVAC, plumbing, lighting/appliance repair, and low voltage or telecommunication installations. Additional Requirements and/or Expectations for Service Electrician Applicants must possess High School diploma or GED. Applicants must pass a mandatory drug screen. Fountain has built its reputation by holding its employees to the highest standards of professionalism and personal conduct. We strictly adhere to the following four keys to success: Show up every day on time. Appreciate instruction from leaders. Let you work ethic speak for you. Retain knowledge. Position Overview for Service Electrician Specific job duties/responsibilities include the following: Industrial, commercial, and residential electrical systems repair, maintenance, and installation Troubleshooting Customer service Ability to handle service contracts, work orders, change orders, and billings Daily, weekly, and/or monthly reporting as requested by the department manager Periodic support of the company's commercial construction operations as needed Increasing and/or promoting the company's visibility and image in the community Additional duties as may be assigned from time to time by the department manager Above all, the Service Technician will be expected to fully embrace the Fountain Electric culture, and represent our company and its values to our customers and the public. In short, this person is expected to lead by example and rigorously uphold our organizational values. He or she must adhere to the highest standards of professionalism and performance.