Machine Operator Jobs in Lilburn, GA

Purpose of the Job: The Production Specialist is responsible to support manufacturing/production to meet assigned objectives. Essential Functions: • Troubleshoot and resolve issues within the work orders flow and machine output. • Communicate with engineers on operation adjustments, issues and root causes • Serve as a liaison between production and warehouse • Drive daily schedule to meet internal and external product demands • Assure material availability • Assure daily standard work is followed and attained • Report product defects and support quality control • Review daily efficiencies and fix areas with efficiency issues Qualifications to Meet Minimum Requirements: • High School Diploma • Three years of related manufacturing experience • Ability to lift up to 75 lbs. • Strong analytical and math proficiency. • Ability to systematically troubleshoot and problem solve integrated processes. • Ability to use Microsoft Word, Excel, Outlook. • Good communication and interpersonal skills, attention to detail and problem-solving skills. • Able to work in a team environment and fulfilling objectives with minimum direct supervision This job description is not intended to be an exhaustive list of all requirements and responsibilities and as such, is subject to change without notice based on the needs of the business and/or department.

Responsibilities Operate and do maintenance checks on forklift Bring in molds for and repair, out when done Identify change over parts and do change over on molds Identify and replace defective mold parts Trouble shoot and repair mold cooling systems Use hand and power tools properly and safety Clean, polish and lube molds on bench Do other related jobs that you are assigned to do Position Requirements Must be able to read and write Write up reports Basic mathematics skills and mechanical aptitude Work Conditions No unusual working conditions exist for this position Mold Cleaning Procedures (A) During Production run (in the press) Stop machine If using mold heather, shut it off. Also shut off chill water Open mold Extend ejector pins spray ejector pins with mold cleaner let pins dry, or dry with air nozzle (wear safety glasses) lube pins with ejector lube Retract ejector pins Clean mold halves using solvent or overnight mold protestant, spay both “A” and “B” halves using a brass (make sure it is brass) brush, scrub both “A” & “B” halves repeat both procedures “6A” and “B” above using mold cleaner, spray both mold halves until all residue is removed, and wipe with a clean rag put a light coat of grease on the (leading edge only) of all leader pins, cam pins and heel blocks spray a light coat of overnight protestant on both halves and leave it Inspect mold check bold tightness on gibes, slides, ejector plate, heel blocks, and cavity blocks inspect for galling or excessive wear on sliding surfaces, leader pins, cam pins, heel blocks and core pins Check for water leaks make sure all quick connect fittings are secure close machine safety gate turn mold heater and/or chill water on open machine safety gate, and inspect for water leaks (if a water leak is detected, either replace the hose or replace the silicone o-rings in the water hose connect fittings Restart machine if there are slides, make sure they are fully back and engaged in their detents manually close mold, then open Wipe excess grease off mold faces from leader pin, heel block areas etc. purge machine as necessary and restart machine Mold Cleaning Procedures (B) Post-Production (out of press) Before removing mold from the press, perform mold cleaning procedure (A) production run, with the exception, do not apply grease to the mold. Remember to shut off water first and remove all water lines before cleaning mold Place mold on disassemble table Attach water passage clear out hose to mold and blow out all water lines Remove ejector box, ejector plate and pins Remove retention plate from ejector plate Remove ejector pins and place in a solvent bath Remove “B” half slides and cavity blocks Remove cores form slides and place in designated storage unit for inspection and cleaning at a later date Place slide and cavity blocks to soak in a solvent solution Remove cavity block, heel blocks, sprue bushing, and cam pins from “A” half and place in solvent soak (do not place heated sprue bushing in solvent) Scrub mold base cavity pockets, mold base and ejector box area with solvent and brass brush and or copper gauze Clean all solvent soaking components with a satchel brush, tooth brush or brass brush as required Perform cleaning of cores Remove all solvent residue from all mold components with spray mold cleaner and a clean rag Inspect all mold components for excessive wear (burring, bright spots, galling, witness marks etc) Bring any questionable components to the tool maker for inspection, measurement and evaluation Prior to re-assembly of mold, clean o-ring seats, replace o-rings and replace or dress up brass fittings Re-assemble tool. Apply light coat of never-seize to the back of cavity blocks and on bolts threads. Apply ejector lube to ejector pins as they are re-positioned in tool. Apply a light coat of mold (bull) grease or Teflon spray grease to ejector guide bushings and ejector push-back pins After tool is assemble, spray “A” and “B” halves with overnight mold protector and close mold halves together Fill water passages with foaming rust inhibitor and wipe off excess. Spray entire external surfaces with overnight mold protector and place mold on production -ready table.

Shift 2 (United States of America) We are looking for a skilled Grinding Machine Operator to perform precision grinding of outside diameters within 0.001”. The ideal candidate must excel at mathematics, be proficient in reading blueprints, and skilled in using measuring instruments such as micrometers and calipers. Good housekeeping and adherence to the 5S system are essential. Work You'll Do: Operate grinding machines to perform precision grinding of outside diameters. Read and interpret blueprints to understand machining specifications. Use and calibrate measuring instruments like micrometers and calipers to ensure precision. Maintain equipment and perform routine maintenance. Ensure the quality of machined parts meets or exceeds specifications. Follow safety protocols and maintain a clean and organized workspace. Adhere to the 5S system (Sort, Set in Order, Shine, Standardize, Sustain). Team: This role will be a part of the Atlanta Facility team reporting directly to the Production Operations Manager. Basic Qualifications: Proven experience in an Outside Diameter grinding machine role. Strong mathematical skills. Proficiency in reading blueprints and technical drawings. Experience using micrometers, calipers, and other precision measuring instruments. Excellent attention to detail and accuracy. Good physical condition and stamina. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. Preferred Qualifications: Mechanical apprenticeship, vocational training, or an associate degree in mechanical technology. Experience with a computerized maintenance management system (CMMS), preferably asset essentials Utilize power tools and various equipment as needed to perform responsibilities. Knowledge of health & safety practices and regulations. Through understanding of both hydraulic and pneumatic systems and components. Physical Demands: To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk, and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50 lbs. Specific vision abilities may include the employee's ability to see near and far distances. #LI-RC1 Who we are: Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. Milacron is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose - Shape What Matters For Tomorrow™ - we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: ******************** EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: The Clorox Company is seeking a qualified candidate for a machine operator position to operate, maintain and troubleshoot our packaging equipment at our Atlanta-Main facility. This facility uses automated packaging equipment and utilities to manufacture and distribute Home Care and Laundry products. The successful candidate will be responsible for ensuring that all equipment is in excellent working condition, and that products are being manufactured to the highest standards of quality and efficiency. Hourly rate: $24.15 with a shift differential (if applicable for overnight hours). Shift-12hr. Schedule, operating in a 2-2-3, in a fast-paced manufacturing and distribution environment. Offering an excellent compensation and benefits package. In this role, you will: * Operate packaging production line equipment, ensuring that it is set up and maintained accurately. * Perform changeovers efficiently on all equipment, following established procedures and protocols. * Fix and/or repair any minor equipment malfunctions, jams or failures, using your mechanical knowledge and skills. * Identify quality problems, working with teams as needed to ensure that products meet or exceed established quality standards. * Maintain an accurate inventory of all supplies and parts assigned ordering replacements as needed. * Follow all safety procedures and protocols, ensuring all equipment is operated safely and responsibly. * Document all maintenance and repair work in accordance with established procedures. * Attending all required training sessions, staying up to date on new equipment and technologies. * Safety is a core value at Clorox; therefore, all employees must perform all their work in accordance with OSHA and Clorox safety standards. What we look for: * High school diploma or equivalent required; some college coursework in mechanical engineering or a related field (preferred). * 1-2 years of previous experience as a machine operator in a manufacturing environment (3 + years highly preferred). * Ability to troubleshoot and repair mechanical issues with equipment. * Knowledge of packaging equipment and processes, as well as quality control principles. * Good interpersonal skills, able to work effectively with vendors, suppliers, and team members. * Identify root and cause problem solving skills (highly preferred). * Must be able to work in a team environment - strong communication skills * Ability to read and interpret technical manuals and schematics. * Strong attention to detail, able to follow established procedures and protocols. * Work timeframes of 12 hr. shifts and overtime if needed as business demands emerge. We seek out and celebrate diverse backgrounds and experiences. We're looking for fresh perspectives, a desire to bring your best, and a non-stop drive to keep growing and learning. At Clorox, we have a Culture of Inclusion. We believe our values-based culture connects to our purpose and helps our people be the best versions of themselves, professionally and personally. This means building a workplace where every person can feel respected, valued, and fully able to participate in our Clorox community. Learn more about our I&D program & initiatives here. Benefits we offer to help you be well and thrive: * Competitive compensation * Generous 401(k) program in the US and similar programs in international * Health benefits and programs that support both your physical and mental well-being * Flexible work environment, depending on your role * Meaningful opportunities to keep learning and growing * Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

The Machine Operators job is to direct all of the other workers on their line so that the line operates efficiently and reaches its target KPI Responsibilities: - Communicate with all other workers on your assigned line so everyone knows the plan and can work together to reach the goals set for the team. - Operate your machine at the set target speeds and inform your supervisor of any issues that are preventing you from running at the target speed. - Complete all required paperwork for your assigned line. - Attempt to find a mechanic if your line goes down; do not wait if you can't find your supervisor - Communicate with your assigned supervisor whenever an issue arises to figure out a solution, and then communicate the new solution to the entire team - Make sure all employees on your assigned line are following all company policies and procedures - Coach employees that are not following the company policies and procedures, and let your supervisor know of any on-going issues - Flow to work; assist any employees on your line that need help or are having issues - Help with whatever work is necessary to keep your line operating - May be moved to other lines as work load requires Complies with all Company and Federal Policies, Procedures and Regulations - Achieve departmental KPI's - Job Description may change with or without prior notice Qualifications: - Excellent verbal and written communication skills, including public speaking - Must be able to work under pressure and meet deadlines while maintaining a positive attitude - Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices - Ability to work as part of a team to complete tasks and reach the targets set for the team - High school diploma or GED required - Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards - Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards - Ability to lift and move up to 60 pounds

Remote Work: No At Zebra, we are a community of innovators who come together to create new ways of working to make everyday life better. United by curiosity and care, we develop dynamic solutions that anticipate our customer's and partner's needs and solve their challenges. Being a part of Zebra Nation means being seen, heard, valued, and respected. Drawing from our diverse perspectives, we collaborate to deliver on our purpose. Here you are a part of a team pushing boundaries to redefine the work of tomorrow for organizations, their employees, and those they serve. You have opportunities to learn and lead at a forward-thinking company, defining your path to a fulfilling career while channeling your skills toward causes that you care about - locally and globally. We've only begun reimaging the future - for our people, our customers, and the world. Let's create tomorrow together. Sets up, operates, dismantles and trouble shoots various equipment, including automation. Performs new work types and owns specific work projects. This is a 3rd Shift position. Sunday-Thursday: 11PM - 7AM Responsibilities: * Applies full knowledge of the functions and mechanical workings of all machines, including ink mixing and color matching * Performs quality tests per ISO procedures * Troubleshoots and resolves a diverse range of moderately complex problems * Possesses knowledge of all job-related policies and procedures in moderately complex situations with limited supervision * Trains and assists other operators in interpreting and applying job documents * Interacts effectively with internal stakeholders to resolve moderately complex problems * Complies with all required safety practices, and regulations * Follows work order instructions and performs labeling requirements. Performs quality tests per ISO procedures * Adheres to productivity standards * Complies with all required safety practices and use of PPE * Resolves a variety of problems of moderate complexity by following highly detailed instructions or procedures * Receives direct supervision for routine work, new projects or assignments * Trains other team members directed by supervisor or lead * Builds productive working relationships internally, generally within immediate department or team * Learns and closely follows established processes and directions * Follow Zebra shared values Qualifications: Minimum Qualifications: * High School or equivalent * 2 + years experience Preferred Qualification: * Ability to follow written and verbal instructions * Ability to work with light to medium machinery. * 3+ years of related experience operating any combination of press, converting, and finishing equipment (die cutting, laminating, slitting) * 3+ years of narrow web flexo press experience * Able to work effectively with others * Excellent mechanical abilities * Ability to follow written and verbal instructions. * Basic math and computer skills. * Able to work effectively with others. Come join the herd! Zebra is an equal opportunity/affirmative action employer committed to a diverse and inclusive workplace All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability and protected veteran status or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com. Know Your Rights: ******************************************************************************************** Conozca sus Derechos: *************************************************************************************** We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Zebra is a federal contractor and is committed to an alcohol and drug free workplace. As a result, all U.S. based employees are subject to the Drug and Alcohol Free Workplace Policy and Procedure. Work for a company that cares, offers a growth environment, and a culture of respect, inclusion and recognition - our front-line workers have an average 7-year tenure! * Healthcare, Dental & Vision, Tuition Reimbursement * 401k with Company Match * Quarterly Cash Incentive Opportunity * 20 Days Starting PTO * 2 Floating Holidays and Paid Volunteer Time Off * Annual Shoe Allowance and free Company Apparel To all recruitment agencies: Zebra does not accept agency resumes. Please do not forward resumes to Zebra employees or any other team members. Zebra is not responsible for any fees related to unsolicited resumes and direct engagement with Zebra employees. Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive - including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. Salary: USD 20.00 Hourly Salary offered will vary depending on your location, job-related skills, knowledge, and experience. Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. To protect candidates from falling victim to online fraudulent activity involving fake job postings and employment offers, please be aware our recruiters will always connect with you via @zebra.com email accounts. Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system. If you are a victim of identity theft contact your local police department.

World Emblem is one of the world's leading suppliers in high quality decorations. We offer a variety of FlexStyle, custom embroidered, sublimated, high-visibility striping, transfers, and more. Our product quality is complemented by its high level of customer satisfaction. With an average of less than 5 days on most products, World Emblem has one of the most competitive turn-around times in the market. For team members both domestic and abroad, World Emblem creates an inspiring and stimulating work environment so that our team has the space and the resources to innovate within our industry. Job Summary We are seeking Machine Operators / Sewers to add to our growing team, preferably with some embroidery/manufacturing experience. If not, don't worry we provide training. Responsible for the operation of embroidery machines / sewing. Candidates Must Possess the Following Abilities: •Identify colors •Quickly thread needles •Be able to accurately compare similarities and differences among sets of letters, numbers, objects, pictures or patterns •Use of hands together with your arm, or your two hands to grasp, manipulate or assemble objects •Perform repeatedly work to adjust the control of a machine to exact position Job Requirements • Must have 1-2 year manufacturing/production experience in a fast-paced environment Traits Required For Success •High standards, high quality work is of utmost importance •Communicate well with others; team player •Dependable, reliable and punctual •Attention to detail •Structured, organized and efficient •Ability to multitask •Must be able to handle pressure in a fast paced environment World Emblem is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. World Emblem is proud to be a drug free workplace. All applicants will undergo a criminal background check, pre-placement drug screen, and are in compliance with E-Verify

Job Details WAREHOUSE 1 - MARIETTA, GA Full Time Not Specified None Day ManufacturingDescription The McGee Group of Companies is searching for a Manufacturing Machine Operator-Eyewear. The main function of the position is the production of frame components according to the required specifications. Position Responsibilities: Prepare raw materials for front and temple milling Sort and allocate materials according to desired order quantities Machine parts to specification using machine tools, CNC machines Operate additional machines to insert front hinges according to technical drawings Measure, examine, and test finished parts to ensure conformance to specifications Utilize instruments such as calipers and micrometers throughout production Keep a watchful eye for quality control issues as they arise Train additional team members on various tasks to support organizational growth Qualifications Prior experience with CNC machines, a plus CAD/CAM experience, a plus Familiarity with a manufacturing environment, including use of machines, power tools and precision measuring instruments, a plus Ability to comply with instructions Capacity to learn new skills quickly Physically capable of performing workshop duties including lifting and moving Organizational and problem-solving skills Strong inter-personal skills (friendly, caring, patient) Superior communication skills in both written and oral format are needed Ability to successfully complete a background and drug screen Benefits: Vision benefit (including employee discount on frames) Medical Insurance Dental Insurance Company Paid Life Insurance Paid time off Ten plus paid holidays 401K with match

Machine Operator positions available with a manufacturing company in Doraville, Georgia! Temp-to-hire opportunities with room for growth- company is growing rapidly due to new product line. Will be running extrusion and/or sandblasting machines Candidates should have at least 6 months experience as a machine operator or in a similar position with a manufacturing or warehouse environment and be comfortable working on the production floor,. 1st shift! Starting Pay Rate for machine operators is $16.00-$17.00 /hr. Company offers fantastic benefits! This company is small enough to feel like family and large enough to offer great benefits and room to grow! To apply for the machine operator position, please submit your resume in response to this ad or fill out an application on our website, www.impactstaffing.com. Impact Staffing is a local staffing and recruiting company with a team of Atlanta-area recruiters ready to help you find work. We specialize in administrative, warehousing, and manufacturing jobs. Impact Staffing is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation or gender identity) national origin, disability, age (40 or older) or genetic information including family medical history.

Production Operator Responsibilities Product operator MUST be able to read a tape measure Cutting sheet metal Maintain a clean and organized warehouse space

Job Function: Under direction of the Production Supervisor, the Machine Operator will follow all established procedures and policies while communicating and supporting quality standards to manufacturing departments in order to meet the company goals. Job Responsibilities: General working knowledge of the safety aspects of machinery. General working knowledge of machinery, including start up, set up, and shut down procedure. (Experience Preferred). Ability to read and understand work orders and job instructions. Able to work unsupervised for short periods of time and continue production. May be required to work overtime. Ability to learn and understand quality standards, causes of defects, and remedies to correct defects using hands, arms, and legs in handling, positioning, and moving materials weighing up to 50 pounds Provide appropriate feedback to departmental team leads, supervisors, and managers based on the results of tests and inspections TEAMWORK: Support efforts by all team members to continuously improve company performance Job Qualifications: Problem solving and organizational skills. Must be able to work well in teams with other employees. Follow all safety and environment regulations. Bilingual (English and Spanish) a plus. Working Conditions: Stand for long periods

Job TitleAssistant Machine OperatorJob SummaryThe Assistant Machine Operator will safely operate, change over production equipment and directing production line personnel to ensure the handling, inspection and packing finished product into erected shipping container boxes to be sealed and processed to the Stacker or Robot for palletizing.Reporting Responsibilities• Reports to the Production Supervisor.Supervisory Responsibilities • Indirect - Provide production related direction to personnel working on assigned production lines.Duties/Responsibilities A. Safety• Responsibilities in this area are to comply with safety rules and to report any unsafe conditions to the production supervisor immediately.B. Quality• Ability to multi-task and perform the list of checks for product quality as defined by Standard Operating Procedure(s) (SOP).• Ability to accurately take counts, weights, and measures of the product per specification sheet.• Always check for flaws in the seals and bag and understands what the requirements of good seals are.C. Productivity1. Responsibilities in this area include:a. Able to perform the position of Stacker and Packer at a high level.• Knows how to pack all types of product with proper counts and according to the SOP.b. Can step up and monitor machine to ensure quality of product is being maintained.• Can measure bag length and width and confirm it matches specification sheet.• Understands use of scale and can determine if weight of bag matches the tolerance on the specification sheet.• Can calculate bags per minute (BPM).• Knows what good end seals and back seal are.• Knows how to check seals to ensure they will not leak.• Knows if print on bag is centered and of correct quality.• Knows if inkjet print on finished box match up to product number and that the date and time are current. Must also verify print clarity.2. Equipment• Can perform roll changes to the SOP• Knows how to identify problems in product or machine and knows how to shut machine down and get help at a minimum.• Able to perform minor preventative maintenance on machines.• Able to perform minor trouble shooting and corrective maintenance on machines. Required Skills/Abilities• Ability to follow directions and work well in a team.• Ability to read English to interpret and translate standard operating procedures.• Thorough understanding of or the ability to quickly learn production equipment.• Understanding of and the ability to abide by applicable state safety and environmental regulations.Requirements• Basic math and counting skills; must 'Pass' verbal math test by reading questions out loud to show reading and comprehension ability as well as showing methods for solving word problems.• Ability to identify basic tools.• Ability to think outside the box and be aware. For example, if parts are running low you must be able trigger reorders.• Ability to communicate effectively with people.• Skills to manage time effectively with the many tasks throughout the day.• Shows willingness to be flexible and take on assignments that maybe outside job requirements.Education and Experience • High school diploma or equivalent required.• At least two (2) year of related experience minimum.• Completion of 'on-the-job' training may be substituted for educational and experience requirements.

divdivdivdivh2 id="is Pasted" style='box-sizing: inherit; font-family: "Indeed Sans", "Noto Sans", "Helvetica Neue", Helvetica, Arial, "Liberation Sans", Roboto, Noto, sans-serif; font-weight: 700; color: rgb(45, 45, 45); margin: 0px; font-size: 1.25rem; line-height: 1.5; margin-block: 0px 0.5rem; margin-inline: 0px; padding-top: 0px; padding-bottom: 0px; font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; letter-spacing: normal; orphans: 2; text-align: start; text-indent: 0px; text-transform: none; widows: 2; word-spacing: 0px; -webkit-text-stroke-width: 0px; white-space: normal; background-color: rgb(255, 255, 255); text-decoration-thickness: initial; text-decoration-style: initial; text-decoration-color: initial;'Job description/h2pbr//pdiv style="box-sizing: inherit;"div style="box-sizing: inherit;"div style="box-sizing: inherit;"div style="box-sizing: inherit;"p style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"b style="box-sizing: inherit; font-weight: 700;"SUMMARY: /bThe Extruder Operator will set up, operate, or tend machines that extrude and form continuous filaments from liquid polymer. This role will ensure the machinery is set up, works properly, and conforms with (and can produce materials that conform with) company quality, quantity, and efficiency standards./pp style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"b style="box-sizing: inherit; font-weight: 700;"ESSENTIAL RESPONSIBILITIES:/b/pul style="box-sizing: inherit; margin-bottom: 0.625rem !important;"li style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Provide support for production and operation of machines as needed./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Manage inventory of raw materials and ensure production is not interrupted./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Maintain the quality of products and production machines./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Assist with packaging and storage of finished products./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Complete production reports./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Provide support for production issues and troubleshoot when the need arises./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Provide system maintenance as needed./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Maintain a clean safe work environment, following Company operating and safety procedures./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Complete work reports for production management./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Propose ideas to improve productivity, product quality, and reduce problem areas./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Other duties as assigned./li/ulp style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"b style="box-sizing: inherit; font-weight: 700;"QUALIFICATIONS amp; COMPETENCY REQUIREMENTS:/b/pul style="box-sizing: inherit; margin-bottom: 0.625rem !important;"li style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Ability to work with multiple production lines and departments./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Ability to operate and repair machinery and equipment./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Ability to gather data, compile information, and prepare reports./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Effective verbal, written, and interpersonal communication skills./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Ability to work in a team environment./li/ulp style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"b style="box-sizing: inherit; font-weight: 700;"EDUCATION amp; EXPERIENCE:/b/pul style="box-sizing: inherit; margin-bottom: 0.625rem !important;"li style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"High School diploma or equivalent is required./lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"3+ years' experience working in plastic production (extrusion) or other manufacturer./li/ul/div/divdiv style="box-sizing: inherit;"p style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"Job Type: Full-time 8 hour shift. /p/divdiv style="box-sizing: inherit;"p style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"Benefits:/pul style="box-sizing: inherit; margin-bottom: 0.625rem !important;"li style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"401(k)/lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Dental insurance/lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Health insurance/lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Paid time off/lili style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Vision insurance/li/ul/divdiv style="box-sizing: inherit;"ul style="box-sizing: inherit; margin-bottom: 0.625rem !important;"li style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Villa Rica, GA 30180: Reliably commute or planning to relocate before starting work (Required)/li/ulp style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"br//pp style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"Experience:/pul style="box-sizing: inherit; margin-bottom: 0.625rem !important;"li style="box-sizing: inherit; font-size: 0.875rem; list-style: inside disc !important;"Manufacturing: 3 years (Preferred)/li/ulp style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"br//p/divdiv style="box-sizing: inherit;"p style="box-sizing: inherit; font-size: 0.875rem; line-height: 1.5; color: rgb(89, 89, 89); margin: 0px; margin-block-end: 0.75rem;"Work Location: In person/p/div/div/divpbr//p/div/div/div /div

Industrial Job Title: Assistant Extrusion Machine Operator Pay: $17.50 per hour Job Type: Temp-to-Hire, Full-Time Shift: 2nd shift | Mon-Fri | 3pm-11:30pm Benefits: Health, medical, dental, 401K Assistant Extrusion Machine Operator description: Set up and operate extrusion machinery according to production schedules. Load and unload products from the machine. Assist with palletizing products. Ability to lift, push, pull, carry up to 50 lbs unassisted. Forklift experience is a plus. Apply now and get started right away! Employ Partners, Inc. is a full-service staffing and recruiting firm. Our mission is to source, attract, engage, and retain quality employees for our valued clients in the local communities we serve. We are growing and always seeking great employees! #EmployHMG

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram, LinkedIn and Twitter. his is a non-rotating, straight 8-hour shift position with a normal schedule of M-F, but some weekends may be required. Safety The operator follows prescribed safety procedures (Ref. SHMS 004). Responsibilities The superba technician is responsible for the following: * Performing lot changes (Ref. FFORM4) (Ref. QWKINST 21 - 5.0). * Flag fixing. * Repairing mechanical breakdowns that require less than two hours of repair time. * Maintaining assigned machines. * Performing all quality checks in superba area. * Performing equipment calibration as trained (Ref. LWKINST 2 in the Quality Control Manual and FWKINST 7). * Routinely serving as an assignment leader in the superba room (Ref. SPI 19 in the SPI manual). * Replacing fallen packages from the monorail. (Ref. FWINST 5) * Repairing minor breakdowns on robotics system. * Completing the daily Downtime Tracking log (Ref SPIFORM19 in the SPI Manual). * Complete Superba Technician Checklist (Fform40) daily. * Complete Superba Water Usage Checklist (Fform 26) daily by shift. * Complete Superba Waste Log (Ref. Fform46) * Complete Plied Yarn Waste By Shift (Ref.Fform45) * Ensure water is shut off on tunnels not scheduled to run. * Relieve assignments for break. * Run machine assignment as required. * Other duties as needed by manager * Come in early or stay over for startup/shutdown. Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law.

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: The Clorox Company is seeking a qualified candidate for a machine operator position to operate, maintain and troubleshoot our packaging equipment at our Atlanta-Main facility. This facility uses automated packaging equipment and utilities to manufacture and distribute Home Care and Laundry products. The successful candidate will be responsible for ensuring that all equipment is in excellent working condition, and that products are being manufactured to the highest standards of quality and efficiency. Starting Hourly rate: $24.15 Shift-12hr. Schedule, operating in a 2-2-3, in a fast-paced manufacturing and distribution environment. Offering an excellent compensation and benefits package. In this role, you will: * Operate packaging equipment, ensuring that it is set up and maintained properly. * Perform changeovers on all equipment, following established procedures and protocols. * Fix and repair any equipment malfunctions or failures, using your mechanical knowledge and skills. * Identify and accurate quality problems, working with teams as needed to ensure that products meet or exceed established quality standards. * Maintain an accurate inventory of all supplies and parts assigned ordering replacements as needed. * Assist with completion of improvement projects and equipment installations, working with the engineering team as needed. * Follow all safety procedures and protocols, ensuring all equipment is operated safely and responsibly. * Document all maintenance and repair work in accordance with established procedures. * Attending all required training sessions, staying up to date on new equipment and technologies. * Safety is a core value at Clorox; therefore, all employees must perform all their work in accordance with OSHA and Clorox safety standards. What we look for: * High school diploma or equivalent required; (some vocational/technical or mechanical coursework in similar areas, highly preferred). * 2-3 years of machine operator working experience. (Manufacturing environment, highly preferred). * Ability to troubleshoot and/or call out minor repairs to mechanical issues with equipment due to jams, adjustments, calibrations. * Root cause, problem solving skills (highly preferred). * Familiar with packaging equipment, manufacturing production lines and efficiencies along with processes. * Able to have attention to detail specs with regards to quality control principles. * Must be able to work in a team environment with strong communication skills, partnering with other team members, team leaders and/or other departments. * Ability to read and interpret technical manuals and schematics for troubleshooting purposes. * Able to follow established procedures, for example; SOP's, GMP's, 5s' and safety protocols. * Work timeframes of 12 hr. Shifts. #LIONSITE We seek out and celebrate diverse backgrounds and experiences. We're looking for fresh perspectives, a desire to bring your best, and a non-stop drive to keep growing and learning. At Clorox, we have a Culture of Inclusion. We believe our values-based culture connects to our purpose and helps our people be the best versions of themselves, professionally and personally. This means building a workplace where every person can feel respected, valued, and fully able to participate in our Clorox community. Learn more about our I&D program & initiatives here. Benefits we offer to help you be well and thrive: * Competitive compensation * Generous 401(k) program in the US and similar programs in international * Health benefits and programs that support both your physical and mental well-being * Flexible work environment, depending on your role * Meaningful opportunities to keep learning and growing * Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

The Machine Operators job is to direct all of the other workers on their line so that the line operates efficiently and reaches its target KPI Responsibilities: - Communicate with all other workers on your assigned line so everyone knows the plan and can work together to reach the goals set for the team. - Operate your machine at the set target speeds and inform your supervisor of any issues that are preventing you from running at the target speed. - Complete all required paperwork for your assigned line. - Attempt to find a mechanic if your line goes down; do not wait if you can't find your supervisor - Communicate with your assigned supervisor whenever an issue arises to figure out a solution, and then communicate the new solution to the entire team - Make sure all employees on your assigned line are following all company policies and procedures - Coach employees that are not following the company policies and procedures, and let your supervisor know of any on-going issues - Flow to work; assist any employees on your line that need help or are having issues - Help with whatever work is necessary to keep your line operating - May be moved to other lines as work load requires Complies with all Company and Federal Policies, Procedures and Regulations - Achieve departmental KPI's - Job Description may change with or without prior notice Qualifications: - Excellent verbal and written communication skills, including public speaking - Must be able to work under pressure and meet deadlines while maintaining a positive attitude - Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices - Ability to work as part of a team to complete tasks and reach the targets set for the team - High school diploma or GED required - Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards - Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards - Ability to lift and move up to 60 pounds

Remote Work: No At Zebra, we are a community of innovators who come together to create new ways of working to make everyday life better. United by curiosity and care, we develop dynamic solutions that anticipate our customer's and partner's needs and solve their challenges. Being a part of Zebra Nation means being seen, heard, valued, and respected. Drawing from our diverse perspectives, we collaborate to deliver on our purpose. Here you are a part of a team pushing boundaries to redefine the work of tomorrow for organizations, their employees, and those they serve. You have opportunities to learn and lead at a forward-thinking company, defining your path to a fulfilling career while channeling your skills toward causes that you care about - locally and globally. We've only begun reimaging the future - for our people, our customers, and the world. Let's create tomorrow together. Sets up, operates, dismantles and trouble shoots various equipment, including automation. Performs new work types and owns specific work projects. This is a 3rd Shift position. Sunday-Thursday: 11PM - 7AM Responsibilities: + Applies full knowledge of the functions and mechanical workings of all machines, including ink mixing and color matching + Performs quality tests per ISO procedures + Troubleshoots and resolves a diverse range of moderately complex problems + Possesses knowledge of all job-related policies and procedures in moderately complex situations with limited supervision + Trains and assists other operators in interpreting and applying job documents + Interacts effectively with internal stakeholders to resolve moderately complex problems + Complies with all required safety practices, and regulations + Follows work order instructions and performs labeling requirements. Performs quality tests per ISO procedures + Adheres to productivity standards + Complies with all required safety practices and use of PPE + Resolves a variety of problems of moderate complexity by following highly detailed instructions or procedures + Receives direct supervision for routine work, new projects or assignments + Trains other team members directed by supervisor or lead + Builds productive working relationships internally, generally within immediate department or team + Learns and closely follows established processes and directions + Follow Zebra shared values Qualifications: Minimum Qualifications: + High School or equivalent + 2 + years experience Preferred Qualification: + Ability to follow written and verbal instructions + Ability to work with light to medium machinery. + 3+ years of related experience operating any combination of press, converting, and finishing equipment (die cutting, laminating, slitting) + 3+ years of narrow web flexo press experience + Able to work effectively with others + Excellent mechanical abilities + Ability to follow written and verbal instructions. + Basic math and computer skills. + Able to work effectively with others. Come join the herd! Zebra is an equal opportunity/affirmative action employer committed to a diverse and inclusive workplace All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identify, national origin, disability and protected veteran status or any other basis prohibited by law. If you are an individual with a disability and need assistance in applying for a position, please contact us at workplace.accommodations@zebra.com . Know Your Rights: ************************************************************************************************* Cono zc a sus Derechos: ******************************************************************************************* We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Zebra is a federal contractor and is committed to an alcohol and drug free workplace. As a result, all U.S. based employees are subject to the Drug and Alcohol Free Workplace Policy and Procedure. Work for a company that cares, offers a growth environment, and a culture of respect, inclusion and recognition - our front-line workers have an average 7-year tenure! + Healthcare, Dental & Vision, Tuition Reimbursement + 401k with Company Match + Quarterly Cash Incentive Opportunity + 20 Days Starting PTO + 2 Floating Holidays and Paid Volunteer Time Off + Annual Shoe Allowance and free Company Apparel To all recruitment agencies: Zebra does not accept agency resumes. Please do not forward resumes to Zebra employees or any other team members. Zebra is not responsible for any fees related to unsolicited resumes and direct engagement with Zebra employees. Zebra Total Rewards includes more than just pay and is structured to meet the needs of our changing global business and evolving talent. We are committed to providing our employees with a benefits program that is comprehensive and competitive - including healthcare, wellness, inclusion networks, and continued learning and development offerings. We offer community service days, in addition to the traditional insurances, compensation, parental leave, employee assistance program and paid time off offerings depending on the country where you work. Salary: USD 20.00 Hourly Salary offered will vary depending on your location, job-related skills, knowledge, and experience. Additionally, all Zebra roles are eligible for cash incentive programs. For example, sales roles have additional opportunity to earn substantial variable compensation tied to quota achievement. In most other roles, the Zebra annual cash incentive program links Company and individual performance together. Some roles may also be eligible for long-term incentive equity awards. To protect candidates from falling victim to online fraudulent activity involving fake job postings and employment offers, please be aware our recruiters will always connect with you via @zebra.com (********************************* email accounts. Applications are only accepted through our applicant tracking system and only accept personal identifying information through that system. Our Talent Acquisition team will not ask for you to provide personal identifying information via e-mail or outside of the system. If you are a victim of identity theft contact your local police department.

World Emblem is one of the world's leading suppliers in high quality decorations. We offer a variety of FlexStyle, custom embroidered, sublimated, high-visibility striping, transfers, and more. Our product quality is complemented by its high level of customer satisfaction. With an average of less than 5 days on most products, World Emblem has one of the most competitive turn-around times in the market. For team members both domestic and abroad, World Emblem creates an inspiring and stimulating work environment so that our team has the space and the resources to innovate within our industry. Job Summary We are seeking Machine Operators / Sewers to add to our growing team, preferably with some embroidery/manufacturing experience.If not, don't worry we provide training. Responsible for the operation of embroidery machines / sewing.Candidates Must Possess the Following Abilities:•Identify colors•Quickly thread needles•Be able to accurately compare similarities and differences among sets of letters, numbers, objects, pictures or patterns•Use of hands together with your arm, or your two hands to grasp, manipulate or assemble objects•Perform repeatedly work to adjust the control of a machine to exact position Job Requirements • Must have 1-2 year manufacturing/production experience in a fast-paced environment Traits Required For Success•High standards, high quality work is of utmost importance•Communicate well with others; team player•Dependable, reliable and punctual•Attention to detail•Structured, organized and efficient•Ability to multitask•Must be able to handle pressure in a fast paced environment World Emblem is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. World Emblem is proud to be a drug free workplace. All applicants will undergo a criminal background check, pre-placement drug screen, and are in compliance with E-Verify