Machine Operator Jobs in Conyers, GA

Purpose of the Job: The Production Specialist is responsible to support manufacturing/production to meet assigned objectives. Essential Functions: • Troubleshoot and resolve issues within the work orders flow and machine output. • Communicate with engineers on operation adjustments, issues and root causes • Serve as a liaison between production and warehouse • Drive daily schedule to meet internal and external product demands • Assure material availability • Assure daily standard work is followed and attained • Report product defects and support quality control • Review daily efficiencies and fix areas with efficiency issues Qualifications to Meet Minimum Requirements: • High School Diploma • Three years of related manufacturing experience • Ability to lift up to 75 lbs. • Strong analytical and math proficiency. • Ability to systematically troubleshoot and problem solve integrated processes. • Ability to use Microsoft Word, Excel, Outlook. • Good communication and interpersonal skills, attention to detail and problem-solving skills. • Able to work in a team environment and fulfilling objectives with minimum direct supervision This job description is not intended to be an exhaustive list of all requirements and responsibilities and as such, is subject to change without notice based on the needs of the business and/or department.

Responsibilities Operate and do maintenance checks on forklift Bring in molds for and repair, out when done Identify change over parts and do change over on molds Identify and replace defective mold parts Trouble shoot and repair mold cooling systems Use hand and power tools properly and safety Clean, polish and lube molds on bench Do other related jobs that you are assigned to do Position Requirements Must be able to read and write Write up reports Basic mathematics skills and mechanical aptitude Work Conditions No unusual working conditions exist for this position Mold Cleaning Procedures (A) During Production run (in the press) Stop machine If using mold heather, shut it off. Also shut off chill water Open mold Extend ejector pins spray ejector pins with mold cleaner let pins dry, or dry with air nozzle (wear safety glasses) lube pins with ejector lube Retract ejector pins Clean mold halves using solvent or overnight mold protestant, spay both “A” and “B” halves using a brass (make sure it is brass) brush, scrub both “A” & “B” halves repeat both procedures “6A” and “B” above using mold cleaner, spray both mold halves until all residue is removed, and wipe with a clean rag put a light coat of grease on the (leading edge only) of all leader pins, cam pins and heel blocks spray a light coat of overnight protestant on both halves and leave it Inspect mold check bold tightness on gibes, slides, ejector plate, heel blocks, and cavity blocks inspect for galling or excessive wear on sliding surfaces, leader pins, cam pins, heel blocks and core pins Check for water leaks make sure all quick connect fittings are secure close machine safety gate turn mold heater and/or chill water on open machine safety gate, and inspect for water leaks (if a water leak is detected, either replace the hose or replace the silicone o-rings in the water hose connect fittings Restart machine if there are slides, make sure they are fully back and engaged in their detents manually close mold, then open Wipe excess grease off mold faces from leader pin, heel block areas etc. purge machine as necessary and restart machine Mold Cleaning Procedures (B) Post-Production (out of press) Before removing mold from the press, perform mold cleaning procedure (A) production run, with the exception, do not apply grease to the mold. Remember to shut off water first and remove all water lines before cleaning mold Place mold on disassemble table Attach water passage clear out hose to mold and blow out all water lines Remove ejector box, ejector plate and pins Remove retention plate from ejector plate Remove ejector pins and place in a solvent bath Remove “B” half slides and cavity blocks Remove cores form slides and place in designated storage unit for inspection and cleaning at a later date Place slide and cavity blocks to soak in a solvent solution Remove cavity block, heel blocks, sprue bushing, and cam pins from “A” half and place in solvent soak (do not place heated sprue bushing in solvent) Scrub mold base cavity pockets, mold base and ejector box area with solvent and brass brush and or copper gauze Clean all solvent soaking components with a satchel brush, tooth brush or brass brush as required Perform cleaning of cores Remove all solvent residue from all mold components with spray mold cleaner and a clean rag Inspect all mold components for excessive wear (burring, bright spots, galling, witness marks etc) Bring any questionable components to the tool maker for inspection, measurement and evaluation Prior to re-assembly of mold, clean o-ring seats, replace o-rings and replace or dress up brass fittings Re-assemble tool. Apply light coat of never-seize to the back of cavity blocks and on bolts threads. Apply ejector lube to ejector pins as they are re-positioned in tool. Apply a light coat of mold (bull) grease or Teflon spray grease to ejector guide bushings and ejector push-back pins After tool is assemble, spray “A” and “B” halves with overnight mold protector and close mold halves together Fill water passages with foaming rust inhibitor and wipe off excess. Spray entire external surfaces with overnight mold protector and place mold on production -ready table.

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: The Clorox Company is seeking a qualified candidate for a machine operator position to operate, maintain and troubleshoot our packaging equipment at our Atlanta-Main facility. This facility uses automated packaging equipment and utilities to manufacture and distribute Home Care and Laundry products. The successful candidate will be responsible for ensuring that all equipment is in excellent working condition, and that products are being manufactured to the highest standards of quality and efficiency. Hourly rate: $24.15 with a shift differential (if applicable for overnight hours). Shift-12hr. Schedule, operating in a 2-2-3, in a fast-paced manufacturing and distribution environment. Offering an excellent compensation and benefits package. In this role, you will: * Operate packaging production line equipment, ensuring that it is set up and maintained accurately. * Perform changeovers efficiently on all equipment, following established procedures and protocols. * Fix and/or repair any minor equipment malfunctions, jams or failures, using your mechanical knowledge and skills. * Identify quality problems, working with teams as needed to ensure that products meet or exceed established quality standards. * Maintain an accurate inventory of all supplies and parts assigned ordering replacements as needed. * Follow all safety procedures and protocols, ensuring all equipment is operated safely and responsibly. * Document all maintenance and repair work in accordance with established procedures. * Attending all required training sessions, staying up to date on new equipment and technologies. * Safety is a core value at Clorox; therefore, all employees must perform all their work in accordance with OSHA and Clorox safety standards. What we look for: * High school diploma or equivalent required; some college coursework in mechanical engineering or a related field (preferred). * 1-2 years of previous experience as a machine operator in a manufacturing environment (3 + years highly preferred). * Ability to troubleshoot and repair mechanical issues with equipment. * Knowledge of packaging equipment and processes, as well as quality control principles. * Good interpersonal skills, able to work effectively with vendors, suppliers, and team members. * Identify root and cause problem solving skills (highly preferred). * Must be able to work in a team environment - strong communication skills * Ability to read and interpret technical manuals and schematics. * Strong attention to detail, able to follow established procedures and protocols. * Work timeframes of 12 hr. shifts and overtime if needed as business demands emerge. We seek out and celebrate diverse backgrounds and experiences. We're looking for fresh perspectives, a desire to bring your best, and a non-stop drive to keep growing and learning. At Clorox, we have a Culture of Inclusion. We believe our values-based culture connects to our purpose and helps our people be the best versions of themselves, professionally and personally. This means building a workplace where every person can feel respected, valued, and fully able to participate in our Clorox community. Learn more about our I&D program & initiatives here. Benefits we offer to help you be well and thrive: * Competitive compensation * Generous 401(k) program in the US and similar programs in international * Health benefits and programs that support both your physical and mental well-being * Flexible work environment, depending on your role * Meaningful opportunities to keep learning and growing * Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

Shift 2 (United States of America) We are looking for a skilled Grinding Machine Operator to perform precision grinding of outside diameters within 0.001”. The ideal candidate must excel at mathematics, be proficient in reading blueprints, and skilled in using measuring instruments such as micrometers and calipers. Good housekeeping and adherence to the 5S system are essential. Work You'll Do: Operate grinding machines to perform precision grinding of outside diameters. Read and interpret blueprints to understand machining specifications. Use and calibrate measuring instruments like micrometers and calipers to ensure precision. Maintain equipment and perform routine maintenance. Ensure the quality of machined parts meets or exceeds specifications. Follow safety protocols and maintain a clean and organized workspace. Adhere to the 5S system (Sort, Set in Order, Shine, Standardize, Sustain). Team: This role will be a part of the Atlanta Facility team reporting directly to the Production Operations Manager. Basic Qualifications: Proven experience in an Outside Diameter grinding machine role. Strong mathematical skills. Proficiency in reading blueprints and technical drawings. Experience using micrometers, calipers, and other precision measuring instruments. Excellent attention to detail and accuracy. Good physical condition and stamina. Ability to work independently and as part of a team. Strong commitment to safety and quality standards. Preferred Qualifications: Mechanical apprenticeship, vocational training, or an associate degree in mechanical technology. Experience with a computerized maintenance management system (CMMS), preferably asset essentials Utilize power tools and various equipment as needed to perform responsibilities. Knowledge of health & safety practices and regulations. Through understanding of both hydraulic and pneumatic systems and components. Physical Demands: To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk, and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50 lbs. Specific vision abilities may include the employee's ability to see near and far distances. #LI-RC1 Who we are: Milacron is a global leader in the manufacture, distribution and service of highly engineered and customized systems within the $27 billion plastic technology and processing industry. We are the only global company with a full-line product portfolio that includes hot runner systems, injection molding, extrusion equipment. We maintain strong market positions across these products, as well as leading positions in process control systems, mold bases and components, maintenance, repair and operating (“MRO”) supplies for plastic processing equipment. Our strategy is to deliver highly customized equipment, components and service to our customers throughout the lifecycle of their plastic processing technology systems. Milacron is an Operating Company of Hillenbrand. Hillenbrand (NYSE: HI) is a global industrial company that provides highly-engineered, mission-critical processing equipment and solutions to customers in over 100 countries around the world. Our portfolio is composed of leading industrial brands that serve large, attractive end markets, including durable plastics, food, and recycling. Guided by our Purpose - Shape What Matters For Tomorrow™ - we pursue excellence, collaboration, and innovation to consistently shape solutions that best serve our associates, customers, communities, and other stakeholders. To learn more, visit: ******************** EEO: The policy of Hillenbrand Inc. is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, Hillenbrand Inc. and our operating companies are committed to being an Equal Employment Opportunity (EEO) Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at recruitingaccommodations@hillenbrand.com . In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. At Hillenbrand, everyone is welcome to apply and "Shape What Matters for Tomorrow".

Grinding Room Operator| Hiring Immediately| Conyers, GA Available Shift: 2nd 12-hours 07:00 pm-07:00 am APPLY ONLINE! Compensation: Competitive starting pay range of $18.12-$21.32 per hour, paid weekly Shift Differential: $2.00 Pay Competitive starting pay rate based on experience and qualifications Increases Eligible for annual and skilled-based wage increases Bonuses Eligible for monthly bonus based on plant productivity Add EXTRA money to your paycheck by referring friends and family Benefits: Eligible for benefits first of the month following hire date Multiple medical and prescription drug coverage options Choice of an Employer-Funded Health Care Account (HCA) or Health Savings Account (HSA) Integrated healthcare programs - telemedicine, chronic condition, weight management and msk health Multiple dental and vision plan coverage options Flexible spending accounts (FSA) Healthcare, dependent care Company provided life and accidental death, short and long-term disability programs Supplemental life, accidental death, and disability buy-up options Accident, critical illness, and hospital indemnity insurance Employee well-being reward program Employee assistance program (EAP) Child and family care support program Educational assistance and tuition reimbursement program Employee discount program 401(K) with 6% company match (Eligible to participate from day one (1) with 100% vesting in all company provided money immediately) Our Social Responsibility platform features a robust, employee-led Give Back program, which includes a matching gifts plan, community grants initiative, and our annual Company-wide Month of Action campaign. With each of these initiatives, our employees are empowered and equipped to give back to their communities and support the non-profits important to them and their families. Through our Give Back program, we own our commitment to Social Responsibility and live our purpose of Packaging a Better Future. Responsibilities JOB SUMMARY: This role oversees all shift activity in the grinding room. In this role, you will operate all grinders, forklift truck, and department equipment. Responsibilites Operates grinders (i.e. hand and pedestal) to remove excess flashing in a safe manner by inspecting grinder for proper adjustment, cracks or chips in the wheel and overall working condition. Demonstrate the ability to recognize the different grades of materials; Ensure that regrind is not mixed or contaminated. Properly identify and tag all boxes of regrind. Complete appropriate end of shift paperwork, accounting for crewing time, machine time, and production quantities. Inspect and recognize defective product and make machine adjustments to correct cause of defects. Assemble, load, and/or unload materials to designated area using appropriate equipment including forklift, clamp lift, barcode readers and safety equipment Troubleshoots work related problems by trying to determine the source of the problem. Performs minor maintenance on the grinders (replacing wheels and bits). Observe all housekeeping, standard work, and safety guidelines. Qualifications QUALIFICATIONS: Qualified candidates' will have 1-year experience in a fast-paced production environment with some mechanical knowledge of industrial systems. Successful completion of lift truck/forklift certification program Minimum of 2 years lift truck/clamp truck experience working in a fast paced logistics environment preferred Mechanical aptitude, demonstrated problem solving skills and effective communication skills - written and verbal are required. Must be able to work in a fast-paced environment. Must be able to stand on your feet and work for an entire 12 hour shifts Pactiv Evergreen is one of the largest manufacturers of fresh food & beverage packaging in North America, with market leading positions across a broad range of products. We bring our Purpose of Packaging a Better Future to life by producing and distributing high-quality products - many made with recyclable or renewable materials - to food and beverage manufacturers, packers and processors, supermarkets, restaurants, foodservice outlets and other institutions. To learn more, please visit our website at pactivevergreen.com. Pactiv Evergreen- Conyers, Ga. Conyers is an Atlanta suburb and the only city in Rockdale County, Georgia. The city is 24 miles east of downtown Atlanta and is a part of the Atlanta Metropolitan Area. As of the 2010 census, the city population was 15,195. The city is the county seat of Rockdale County. The plant was acquired by Pactiv in 2003, manufactures PET and Polypropylene Lids & ESL Trays, and has approximately 180 employees. The Conyers plant was awarded Pactiv safety plant of the year 2018, Foodservice BU Environmental plant of the year 2019. Pactiv Evergreen is committed to a diverse and inclusive workforce. Pactiv Evergreen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age national origin, physical or mental disability, genetic information, gender identity and/or expression, marital status, veteran status or other characteristics or statuses protected by law. For individuals with disabilities who would like to request an accommodation, please call ************** or email *********************. All information will be kept confidential according to EEO guidelines and applicable laws. Pactiv Evergreen employees are subject to post-hire drug and alcohol testing in accordance with company policies.

The Machine Operators job is to direct all of the other workers on their line so that the line operates efficiently and reaches its target KPI Responsibilities: - Communicate with all other workers on your assigned line so everyone knows the plan and can work together to reach the goals set for the team. - Operate your machine at the set target speeds and inform your supervisor of any issues that are preventing you from running at the target speed. - Complete all required paperwork for your assigned line. - Attempt to find a mechanic if your line goes down; do not wait if you can't find your supervisor - Communicate with your assigned supervisor whenever an issue arises to figure out a solution, and then communicate the new solution to the entire team - Make sure all employees on your assigned line are following all company policies and procedures - Coach employees that are not following the company policies and procedures, and let your supervisor know of any on-going issues - Flow to work; assist any employees on your line that need help or are having issues - Help with whatever work is necessary to keep your line operating - May be moved to other lines as work load requires Complies with all Company and Federal Policies, Procedures and Regulations - Achieve departmental KPI's - Job Description may change with or without prior notice Qualifications: - Excellent verbal and written communication skills, including public speaking - Must be able to work under pressure and meet deadlines while maintaining a positive attitude - Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices - Ability to work as part of a team to complete tasks and reach the targets set for the team - High school diploma or GED required - Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards - Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards - Ability to lift and move up to 60 pounds

Chase Staffing - Conyers has immediate openings for Machine Operators for various companies in the Conyers/Covington area. These positions are 8hr to 12hrs shifts - pay rates starting between $16- $22+ per hr BOE - All shifts available*** If you are dependable and have machine operator exp please apply today Skills Machine op exp is a must Mixing experience is a big plus++ Mechanically inclined people needed Attention to detail Able to lift and carry 50+ lbs Lock out Tag out exp. is a plus Sit-down Forklift exp is a plus Requirements: Must have High School Diploma or equivalent *** Must have a clean criminal background and be able to pass a drug test*** At least 1 year of Machine operator experience ***Our service area includes Social Circle, Covington, Conyers and Lithonia *** CHASE provides Equal Employment Opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, status as disabled veteran, marital status, sexual orientation, gender identity, hairstyles, hair textures, pregnancy, childbirth, and related medical conditions or any other legally protected characteristic in accordance with applicable laws. In addition, CHASE complies with applicable state and local laws governing nondiscrimination in employment in every location. CHASE is committed to complying fully with the Americans with Disabilities Act (ADA) and ensuring equal opportunity in employment for qualified persons with disabilities.

Temp Chase Staffing - Conyers has immediate openings for Machine Operators for various companies in the Conyers/Covington area. These positions are 8hr to 12hrs shifts - pay rates starting between $16- $22+ per hr BOE - All shifts available*** If you are dependable and have machine operator exp please apply today Skills Machine op exp is a must Mixing experience is a big plus++ Mechanically inclined people needed Attention to detail Able to lift and carry 50+ lbs Lock out Tag out exp. is a plus Sit-down Forklift exp is a plus Requirements: Must have High School Diploma or equivalent *** Must have a clean criminal background and be able to pass a drug test*** At least 1 year of Machine operator experience ***Our service area includes Social Circle, Covington, Conyers and Lithonia *** CHASE provides Equal Employment Opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, status as disabled veteran, marital status, sexual orientation, gender identity, hairstyles, hair textures, pregnancy, childbirth, and related medical conditions or any other legally protected characteristic in accordance with applicable laws. In addition, CHASE complies with applicable state and local laws governing nondiscrimination in employment in every location. CHASE is committed to complying fully with the Americans with Disabilities Act (ADA) and ensuring equal opportunity in employment for qualified persons with disabilities.

KPS Global (KPSG) is the North American industry leader in the manufacture, production, and installation of Walk-in Coolers and Freezers. KPSG's end-product serves many channels within the retail food market as well as industrial applications. KPSG is headquartered in Fort Worth, Texas with most support activities centralized in the Fort Worth facility. KPSG maintains product manufacturing in five locations: San Dimas, CA; Fort Worth, TX; Piney Flats, TN; Conyers, GA and Goodyear, AZ. KPS Global values its outstanding people who are deeply committed to providing innovative, high-quality service to clients from coast-to-coast. As a member of the KPS team, you'll be part of an exciting and modern company culture where you will enjoy professional flexibility and benefit from an environment where creativity, innovation, and hard work are rewarded. Job Summary The Machine Operator is responsible for setting up and operating production equipment under immediate supervision in accordance with established procedures and guidelines. This role ensures KPS Global meets quality, safety, and efficiency standards and satisfies customer requirements. Major Responsibilities Performing duties in accordance with current Quality Management System, Safety Management System, and KPS Global Code of Conduct requirements Operating manual production machinery and equipment Reading and interpreting job orders, diagrams, and/or blue prints to select, position, and secure machinery and materials Loading, unloading, lifting, and moving materials and product utilizing lifting equipment when available Completing and maintaining all associated electronic processes and paperwork including bar-coding, checklists, stamping, blue prints, shipping/receiving documents, accessory lists, and scanning of materials Performing pre-shift preventative maintenance Maintaining departmental housekeeping and 5S standards Required Skills Must be able to stand and walk on concrete up to 100% of the work day Must be able to bend, stoop, kneel, and crouch Must be able to lift and carry 50 lbs along and over 50 lbs with assistance Must be able to climb and balance Must be able to use hands to reach, handle, and/or feel Must be able to visually inspect products Must have manual dexterity in hands for tool usage Must be able to work in a non-temperature controlled environment Must be able to wear all required personal protective equipment

World Emblem is one of the world's leading suppliers in high quality decorations. We offer a variety of FlexStyle, custom embroidered, sublimated, high-visibility striping, transfers, and more. Our product quality is complemented by its high level of customer satisfaction. With an average of less than 5 days on most products, World Emblem has one of the most competitive turn-around times in the market. For team members both domestic and abroad, World Emblem creates an inspiring and stimulating work environment so that our team has the space and the resources to innovate within our industry. Job Summary We are seeking Machine Operators / Sewers to add to our growing team, preferably with some embroidery/manufacturing experience. If not, don't worry we provide training. Responsible for the operation of embroidery machines / sewing. Candidates Must Possess the Following Abilities: •Identify colors •Quickly thread needles •Be able to accurately compare similarities and differences among sets of letters, numbers, objects, pictures or patterns •Use of hands together with your arm, or your two hands to grasp, manipulate or assemble objects •Perform repeatedly work to adjust the control of a machine to exact position Job Requirements • Must have 1-2 year manufacturing/production experience in a fast-paced environment Traits Required For Success •High standards, high quality work is of utmost importance •Communicate well with others; team player •Dependable, reliable and punctual •Attention to detail •Structured, organized and efficient •Ability to multitask •Must be able to handle pressure in a fast paced environment World Emblem is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, or veteran status. World Emblem is proud to be a drug free workplace. All applicants will undergo a criminal background check, pre-placement drug screen, and are in compliance with E-Verify

Job Details WAREHOUSE 1 - MARIETTA, GA Full Time Not Specified None Day ManufacturingDescription The McGee Group of Companies is searching for a Manufacturing Machine Operator-Eyewear. The main function of the position is the production of frame components according to the required specifications. Position Responsibilities: Prepare raw materials for front and temple milling Sort and allocate materials according to desired order quantities Machine parts to specification using machine tools, CNC machines Operate additional machines to insert front hinges according to technical drawings Measure, examine, and test finished parts to ensure conformance to specifications Utilize instruments such as calipers and micrometers throughout production Keep a watchful eye for quality control issues as they arise Train additional team members on various tasks to support organizational growth Qualifications Prior experience with CNC machines, a plus CAD/CAM experience, a plus Familiarity with a manufacturing environment, including use of machines, power tools and precision measuring instruments, a plus Ability to comply with instructions Capacity to learn new skills quickly Physically capable of performing workshop duties including lifting and moving Organizational and problem-solving skills Strong inter-personal skills (friendly, caring, patient) Superior communication skills in both written and oral format are needed Ability to successfully complete a background and drug screen Benefits: Vision benefit (including employee discount on frames) Medical Insurance Dental Insurance Company Paid Life Insurance Paid time off Ten plus paid holidays 401K with match

**: This role oversees all shift activity in the grinding room. In this role, you will operate all grinders, forklift truck, and department equipment. **Responsibilities ** Operates grinders (i.e. hand and pedestal) to remove excess flashing in a safe manner by inspecting grinder for proper adjustment, cracks or chips in the wheel and overall working condition. Demonstrate the ability to recognize the different grades of materials; Ensure that regrind is not mixed or contaminated. Properly identify and tag all boxes of regrind. Complete appropriate end of shift paperwork, accounting for crewing time, machine time, and production quantities. Inspect and recognize defective product and make machine adjustments to correct cause of defects. Assemble, load, and/or unload materials to designated area using appropriate equipment including forklift, clamp lift, barcode readers and safety equipment Troubleshoots work related problems by trying to determine the source of the problem. Performs minor maintenance on the grinders (replacing wheels and bits). Observe all housekeeping, standard work, and safety guidelines. **QUALIFICATIONS: ** Qualified candidates' will have 1-year experience in a fast-paced production environment with some mechanical knowledge of industrial systems. Successful completion of lift truck/forklift certification program Minimum of 2 years lift truck/clamp truck experience working in a fast paced logistics environment preferred Mechanical aptitude, demonstrated problem solving skills and effective communication skills - written and verbal are required. Must be able to work in a fast-paced environment. Must be able to stand on your feet and work for an entire 12 hour shifts Pactiv Evergreen is one of the largest manufacturers of fresh food & beverage packaging in North America, with market leading positions across a broad range of products. We bring our Purpose of Packaging a Better Future to life by producing and distributing high-quality products - many made with recyclable or renewable materials - to food and beverage manufacturers, packers and processors, supermarkets, restaurants, foodservice outlets and other institutions. To learn more, please visit our website at pactivevergreen.com. **Pactiv Evergreen- Conyers, Ga. ** Conyers is an Atlanta suburb and the only city in Rockdale County, Georgia. The city is 24 miles east of downtown Atlanta and is a part of the Atlanta Metropolitan Area. As of the 2010 census, the city population was 15,195. The city is the county seat of Rockdale County. The plant was acquired by Pactiv in 2003, manufactures PET and Polypropylene Lids & ESL Trays, and has approximately 180 employees. The Conyers plant was awarded Pactiv safety plant of the year 2018, Foodservice BU Environmental plant of the year 2019. Pactiv Evergreen is committed to a diverse and inclusive workforce. Pactiv Evergreen is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex (including pregnancy), sexual orientation, religion, creed, age national origin, physical or mental disability, genetic information, gender identity and/or expression, marital status, veteran status or other characteristics or statuses protected by law. For individuals with disabilities who would like to request an accommodation, please call ************** or email *********************. All information will be kept confidential according to EEO guidelines and applicable laws. Pactiv Evergreen employees are subject to post-hire drug and alcohol testing in accordance with company policies. You should be proficient in: Forklift Licensed Plastic Extrusion Experience Thermoforming Experience Machines & technologies you'll use: OD/ID Grinding Machine

Production Operator Responsibilities Product operator MUST be able to read a tape measure Cutting sheet metal Maintain a clean and organized warehouse space

This position is heavy machine operation creating parts for walk-in freezers. You will be working with hot metal and casting the material into the shape of a part or using a grinder to shape/polish the parts. Mechanical and die casting experience is a plus as you will also be responsible for minor mechanical maintenance and repair. Schedule: Monday-Friday with occasional Saturday's Shifts: 1st- 5:00 AM - 5:00 PM or 6:00 AM - 4:30PM 2nd- 5:00 PM - 5:00 AM Job Duties: * Performs Operator's start up and safety checks as per work instructions. Operate and tend Die Cast Machine, Trim Press and Robot where available to cast quality Zinc castings per production requirements. * Performs duties as required to keep the machine running such as touches, unfreezing the nozzle, adjusting the spray position and volume, die temperature setting as per process sheet etc. * Unload cured, cast zinc parts from Die Cast Machine (this may require the hand loading of steel inserts to produce a part) or load parts in Trim Press to remove excess zinc from parts. * Complete production reports as required by Management. * Replenish all lubricants, operational fluids and/or gas charge as necessary for proper machine function as required on the operators check sheet. * Set up to include die cast, trim die, nozzle and gooseneck, operate, and tend Die Cast Machine or Trim Press to cast quality Zinc castings per production requirements. * Detects jams and malfunctions of equipment and make minor adjustments as necessary to achieve production and quality goals. * Set up adjust spray unit. Adjust valves and dials of machines to regulate air pressure, die temperature, and shot speed, and to achieve cycle times and part quality as per Die cast process set up sheet * Grind or deburr objects or parts as part of the polishing process. Physical Requirements: While performing the duties of this Job, the employee is regularly required to stand; walk; sit and talk or hear. Job requires the ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects. Must have the ability to lift up to 50 pounds. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * The noise level in the work environment is usually loud. * Exposure to small amounts of hot metals is not unusual. * The environment will be hot and dirty.

Temp Concrete Production Operators needed for manufacturer located in Conyers, GA. Immediate job openings for dependable employees. Requirements: Must be able to lift 50lbs. Additional details: Position is full-time, 6:00am - 6:00pm with rotating days. Located in Conyers, GA. Pay rate starting at $9.00/hr. EOE How to apply: Interested? Please apply online.

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram, LinkedIn and Twitter. his is a non-rotating, straight 8-hour shift position with a normal schedule of M-F, but some weekends may be required. Safety The operator follows prescribed safety procedures (Ref. SHMS 004). Responsibilities The superba technician is responsible for the following: * Performing lot changes (Ref. FFORM4) (Ref. QWKINST 21 - 5.0). * Flag fixing. * Repairing mechanical breakdowns that require less than two hours of repair time. * Maintaining assigned machines. * Performing all quality checks in superba area. * Performing equipment calibration as trained (Ref. LWKINST 2 in the Quality Control Manual and FWKINST 7). * Routinely serving as an assignment leader in the superba room (Ref. SPI 19 in the SPI manual). * Replacing fallen packages from the monorail. (Ref. FWINST 5) * Repairing minor breakdowns on robotics system. * Completing the daily Downtime Tracking log (Ref SPIFORM19 in the SPI Manual). * Complete Superba Technician Checklist (Fform40) daily. * Complete Superba Water Usage Checklist (Fform 26) daily by shift. * Complete Superba Waste Log (Ref. Fform46) * Complete Plied Yarn Waste By Shift (Ref.Fform45) * Ensure water is shut off on tunnels not scheduled to run. * Relieve assignments for break. * Run machine assignment as required. * Other duties as needed by manager * Come in early or stay over for startup/shutdown. Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law.

Clorox is the place that's committed to growth - for our people and our brands. Guided by our purpose and values, and with people at the center of everything we do, we believe every one of us can make a positive impact on consumers, communities, and teammates. Join our team. #CloroxIsThePlace Your role at Clorox: The Clorox Company is seeking a qualified candidate for a machine operator position to operate, maintain and troubleshoot our packaging equipment at our Atlanta-Main facility. This facility uses automated packaging equipment and utilities to manufacture and distribute Home Care and Laundry products. The successful candidate will be responsible for ensuring that all equipment is in excellent working condition, and that products are being manufactured to the highest standards of quality and efficiency. Starting Hourly rate: $24.15 Shift-12hr. Schedule, operating in a 2-2-3, in a fast-paced manufacturing and distribution environment. Offering an excellent compensation and benefits package. In this role, you will: * Operate packaging equipment, ensuring that it is set up and maintained properly. * Perform changeovers on all equipment, following established procedures and protocols. * Fix and repair any equipment malfunctions or failures, using your mechanical knowledge and skills. * Identify and accurate quality problems, working with teams as needed to ensure that products meet or exceed established quality standards. * Maintain an accurate inventory of all supplies and parts assigned ordering replacements as needed. * Assist with completion of improvement projects and equipment installations, working with the engineering team as needed. * Follow all safety procedures and protocols, ensuring all equipment is operated safely and responsibly. * Document all maintenance and repair work in accordance with established procedures. * Attending all required training sessions, staying up to date on new equipment and technologies. * Safety is a core value at Clorox; therefore, all employees must perform all their work in accordance with OSHA and Clorox safety standards. What we look for: * High school diploma or equivalent required; (some vocational/technical or mechanical coursework in similar areas, highly preferred). * 2-3 years of machine operator working experience. (Manufacturing environment, highly preferred). * Ability to troubleshoot and/or call out minor repairs to mechanical issues with equipment due to jams, adjustments, calibrations. * Root cause, problem solving skills (highly preferred). * Familiar with packaging equipment, manufacturing production lines and efficiencies along with processes. * Able to have attention to detail specs with regards to quality control principles. * Must be able to work in a team environment with strong communication skills, partnering with other team members, team leaders and/or other departments. * Ability to read and interpret technical manuals and schematics for troubleshooting purposes. * Able to follow established procedures, for example; SOP's, GMP's, 5s' and safety protocols. * Work timeframes of 12 hr. Shifts. #LIONSITE We seek out and celebrate diverse backgrounds and experiences. We're looking for fresh perspectives, a desire to bring your best, and a non-stop drive to keep growing and learning. At Clorox, we have a Culture of Inclusion. We believe our values-based culture connects to our purpose and helps our people be the best versions of themselves, professionally and personally. This means building a workplace where every person can feel respected, valued, and fully able to participate in our Clorox community. Learn more about our I&D program & initiatives here. Benefits we offer to help you be well and thrive: * Competitive compensation * Generous 401(k) program in the US and similar programs in international * Health benefits and programs that support both your physical and mental well-being * Flexible work environment, depending on your role * Meaningful opportunities to keep learning and growing * Half-day Fridays, depending on your location Please apply directly to our job postings and do not submit your resume to any person via text message. Clorox does not conduct text-based interviews and encourages you to be cautious of anyone posing as a Clorox recruiter via unsolicited texts during these uncertain times. To all recruitment agencies: Clorox (and its brand families) does not accept agency resumes. Please do not forward resumes to Clorox employees, including any members of our leadership team. Clorox is not responsible for any fees related to unsolicited resumes.

The Machine Operators job is to direct all of the other workers on their line so that the line operates efficiently and reaches its target KPI Responsibilities: - Communicate with all other workers on your assigned line so everyone knows the plan and can work together to reach the goals set for the team. - Operate your machine at the set target speeds and inform your supervisor of any issues that are preventing you from running at the target speed. - Complete all required paperwork for your assigned line. - Attempt to find a mechanic if your line goes down; do not wait if you can't find your supervisor - Communicate with your assigned supervisor whenever an issue arises to figure out a solution, and then communicate the new solution to the entire team - Make sure all employees on your assigned line are following all company policies and procedures - Coach employees that are not following the company policies and procedures, and let your supervisor know of any on-going issues - Flow to work; assist any employees on your line that need help or are having issues - Help with whatever work is necessary to keep your line operating - May be moved to other lines as work load requires Complies with all Company and Federal Policies, Procedures and Regulations - Achieve departmental KPI's - Job Description may change with or without prior notice Qualifications: - Excellent verbal and written communication skills, including public speaking - Must be able to work under pressure and meet deadlines while maintaining a positive attitude - Ability to work independently and to carry out assignments to completion within parameters of instructions given, prescribed routines, and standard accepted practices - Ability to work as part of a team to complete tasks and reach the targets set for the team - High school diploma or GED required - Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards - Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards - Ability to lift and move up to 60 pounds

Temp Energetic and eager to learn Machine Operator Trainees needed in Conyers, GA. Must be self motivated and able to perform basic math and measuring skills. Requirements: Must be able to lift up to 60 lbs as needed. Additional details: Position is full-time, Successful candidate will train during the day. After training, you will work the night shift 7:00pm - 3:00am, Monday - Friday. Pay rate is $9.00 - $10.00/hr to start. Located in Conyers, GA. EOE How to apply: Interested candidates, please apply online.