Laminating Operator Jobs Near Me

Waverly, OH • Set up and operate assembly equipment as assigned. • Follow work instructions as outlined in Standard Operation Sheet (SOS) • Job Element Sheet (JES), and/or packing instructions for all assigned operations. • Load/unload parts in/out of welders, dies, trunions, and/or assembly fixtures. • Operate equipment that welds, stamps, presses, crimps, stakes, and/or rivets together parts and/or sub-assemblies. • Perform manual assembly, welding, and tapping operations as required. • Ensure quality and quantities of parts produced to meet required quality specifications and production rates. • Follow all company policies and procedures. • Perform light, routine maintenance on assigned equipment. • Fill out all necessary paperwork associated with the job including but not limited to, some or all of the following: start-up checklist, pre-shift inspection sheet, labor tickets, scrap records, downtime tracking sheets, quality assurance checks, and product identification tags. • Any other reasonable request made by management. • Travel, including overnight travel, as required from time to time. • Work overtime before and/or after normal shifts and/or on weekends as assigned. • Be present at work, ready to work at the assigned time for every scheduled or voluntarily accepted work day. • Contribute to a safe, clean and comfortable work environment by applying the principles of the 5S discipline (simplify, separate, sanitize, standardize and support) • Comply fully with applicable federal, state, and local laws. WORK EXPERIENCE • No minimum experience is required. ESSENTIAL FUNCTIONS • To perform this job successfully, an individual must be able to perform all essential functions satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. LANGUAGE • Ability to read and demonstrate understanding of documents such as safety rules, work instructions, maintenance instructions, employee handbook, policies, and procedures. MATHEMATICS • Ability to apply basic math skills such as adding, subtracting, multiplying and dividing whole numbers, fractions and decimals; ability to round numbers and to calculate averages. REASONING/JUDGMENT • Ability to apply common sense understanding and sound judgment to carry out detailed written or oral instructions. • Ability to deal with problems involving a few concrete variables in standardized situations. INTERPERSONAL SKILLS • Must be able to interact effectively with employees at all levels in a team environment. PHYSICAL ABILITY • Ability to use hands to grip, finger, handle and/or feel parts. • Ability to wear required personal protective equipment, including, but not limited to gloves, protective sleeves, safety glasses with side shields, and steel-toed shoes. • Ability to use hands, arms and wrists to work continuously throughout shift. • Ability to use tools which vibrate, such as grinders, drills, sanders, etc. continuously throughout shift. • Ability to stand, walk, sit, talk, hear, and write. • Ability to repeatedly lift, reach, push, pull, carry, bend, twist, and stoop with parts, boxes, or other objects weighing up to 40 pounds within allotted times. • Ability to use close vision, depth perception and adjust focus to visually inspect part quality to standards. • Ability to work overtime for shifts of up to 12 hours per day, seven days per week. • Ability to work in hot or cold environments. • Ability to work in loud environments requiring hearing protection. Benefits • Medical • Dental • Vision • 401K • Short-Term Disability • Competitive Wages Starting Pay $16.50/hr Shift Premium $1.00 - 2nd Shift $1.50 - 3rd Shift Raise Frequency 3 Mo / 12 Mo / 24 Mo PandoLogic. Category:Manufacturing, Keywords:Assembler, Location:Piketon, OH-45661

Who is Recruiting from Scratch: Recruiting from Scratch is a talent firm that focuses on placing the best candidate for our clients. Our team is 100% remote and we work with teams across North America, South America, and Europe to help them hire. Operations & Growth Lead | AI Robotics Pioneer Location: Silicon Valley Compensation: $100K-$200K + Equity (0.4%-1%) Our client, a well-funded robotics startup revolutionizing home automation, seeks an Operations & Growth Lead to scale their data collection initiatives and drive operational excellence. This is a unique opportunity to join a team of Stanford PhDs pushing the boundaries of what's possible in consumer robotics. Key Responsibilities: Lead and scale a team of data collectors while optimizing collection processes Design and implement innovative payment incentive systems Manage hardware deployment and logistics Build and optimize operational systems from ground up Drive data quality control and process improvement initiatives The Ideal Candidate Has: 3+ years of operations or logistics experience, preferably in high-growth environments Strong track record managing and scaling teams Experience with hardware deployment and data collection systems Excellence in data analysis and operational decision-making Exceptional leadership and communication skills Comfort with ambiguity and rapid iteration Why This Role: Ground-floor opportunity at a $30M funded startup Competitive compensation package with significant equity upside Chance to shape the future of home robotics Collaborative, garage-startup culture transitioning to new office space

City/State Virginia Beach, VA Work Shift Second (Evenings) Sentara Communication Assistants play a critical role within the organization facilitating all emergent and non-emergent communication both externally and internally. Our Centralized Hospital Communications Center is responsible for all Sentara Hospitals and free-standing emergency departments. (Currently 12 hospitals and 4 FSEDs). Emergency Call facilitation will include but is not limited to receiving, activating, and tracking complex emergency alerts such as Security, Facility and Medical Alerts. When processing emergency alerts, in addition to making overhead announcements, you will activate paging groups, contact on-call providers and teams, coordinate and track responses from physicians, specialized nursing teams, air and ground transport, and others. Some of our most serious emergencies will include activating the Sentara Emergency Notification system for mass notifications. Internal call facilitation will generally include utilizing complex on-call schedules with escalations and facilitating nurse to physician and physician to physician communication to include emergent consultations. Will assist with training new employees when needed and additional duties as assigned. Previous healthcare and high-volume multi-line phone office setting experience preferred. Understanding medical terminology preferred. Education HS Diploma required. Certification/Licensure No certification required. Experience Two years customer service experience required. Two years call center experience required. Benefits: Sentara offers an attractive array of full-time benefits to include Medical, Dental, Vision, Paid Time Off, Sick, Tuition Reimbursement, a 401k/403B, 401a, Performance Plus Bonus, Career Advancement Opportunities, Work Perks, and more. Our success is supported by a family-friendly culture that encourages community involvement and creates unlimited opportunities for development and growth. Be a part of an excellent healthcare organization that cares about our People, Quality, Patient Safety, Service, and Integrity. Join a team that has a mission to improve health every day and a vision to be the healthcare choice of the communities that we serve! Keywords: Talroo-Allied Health, Monster, Call Center . We provide market-competitive compensation packages, inclusive of base pay, incentives, benefits, and equity. The base pay rate for Full Time employment is:$17.31 - $28.85 Benefits: Caring For Your Family and Your Career • Medical, Dental, Vision plans • Adoption, Fertility and Surrogacy Reimbursement up to $10,000 • Paid Time Off and Sick Leave • Paid Parental & Family Caregiver Leave • Emergency Backup Care • Long-Term, Short-Term Disability, and Critical Illness plans • Life Insurance • 401k/403B with Employer Match • Tuition Assistance - $5,250/year and discounted educational opportunities through Guild Education • Student Debt Pay Down - $10,000 • Reimbursement for certifications and free access to complete CEUs and professional development • Pet Insurance • Legal Resources Plan • Colleagues may have the opportunity to earn an annual discretionary bonus if established system and employee eligibility criteria is met Sentara Independence provides quality outpatient services to the surrounding community. The facility includes an ambulance-accessible emergency room that is supported by board-certified physicians. Sentara Independence houses state-of-the-art medical equipment and highly-skilled physicians and staff. Sentara Independence is now an extension of the quality services at Sentara Virginia Beach General Hospital including advanced imaging and physical therapy. Sentara Health is an equal opportunity employer and prides itself on the diversity and inclusiveness of its close to an almost 30,000-member workforce. Diversity, inclusion, and belonging is a guiding principle of the organization to ensure its workforce reflects the communities it serves. In support of our mission “to improve health every day,” this is a tobacco-free environment. For positions that are available as remote work, Sentara Health employs associates in the following states: Alabama, Delaware, Florida, Georgia, Idaho, Indiana, Kansas, Louisiana, Maine, Maryland, Minnesota, Nebraska, Nevada, New Hampshire, North Carolina, North Dakota, Ohio, Oklahoma, Pennsylvania, South Carolina, South Dakota, Tennessee, Texas, Utah, Virginia, Washington, West Virginia, Wisconsin, and Wyoming.

Proud American manufacturer of environmental safety products and global leader in spill containment. With an expanding product line reaching new industries by the day, this organization offers great overtime, growth, and development opportunities as they continue to climb to new heights. Position Overview: The Machine Operator is responsible for running a rotational plastic molding machine. A remote operated crane is used to load the mold into the machine, and raw material is loaded as well. The Operator will be responsible for running each production cycle, which includes moving molds from the molding machine itself into a cooling bath. Key Responsibilities: Load molds into machine, using remote crane Feed machine with appropriate amount of powder based material Use mechanical arm to move mold into cooling tank Remove part from mold Visual inspection for defects Requirements: 1-2 years of Production experience Ability to lift 50# regularly Experience with plastics is very helpful, but not necessary Willingness to work overtime (up to 55 hours alternating weeks) Equal Opportunity Employer Statement: We are an Equal Opportunity Employer and do not discriminate based on race, ancestry, national origin, color, religion, sex, age, marital status, sexual orientation, disability, veteran status, or any other protected classification under the law. #TalrooMentor

We are helping our client find TeleOps Operators who will be responsible for testing and operation of the remote monitoring/control system for autonomous vehicles. In this role, you will oversee various initiatives and strive to achieve team goals. This position is tasked with operating in a collaborative, fast-paced environment with cross-functional organizations. We're looking for proactive, positive and team-oriented individuals who are motivated. As a TeleOps Operator, you'll: Effectively monitor autonomous vehicle operations. Respond to and manage critical mission needs. Assist the fleet of vehicles by providing remote guidance in complex situations. Assist with testing and data collection. Work closely with SW, QA and UX to improve the TeleOps Interface. Willingness to work flexible shift hours. Requirements Excellent driving history and no criminal history 2+ years of experience working in operations or a fast-paced environment Experience working in a cross-functional team Excellent computer skills and problem solving ability Excellent written and verbal communication Positive attitude with a growth mindset Bonus Qualifications: Experience with working in the autonomous vehicle industry Efficient with working on the Windows 10 OS Bachelor degree in STEM, Analytics, or related fields Basic knowledge of Windows, Linux, Software/QA testing Basic understanding of data analysis to help build out and analyze metrics Basic QA testing experience Experience playing video games

Shift Timings: (2 Shifts Available) Morning Shift: Monday - Thursday, 6:00 AM - 4:00 PM (Two 30-minute breaks) Night Shift: Monday - Thursday 8:00 PM - 6:00 AM (Two 30 -minute breaks) Industry Experience Preferred: Pharmaceutical, Nutraceutical, or Food Processing Responsibilities: Operate and maintain manufacturing/packaging equipment Follow cGMP guidelines, SOPs & batch records Work in packaging (filling bottles, operating machines) or manufacturing (mixing, lifting, climbing small ladders) Ensure safety, compliance, and efficiency in all tasks Looking for candidates with: High school diploma or GED Ability to lift up to 50 lbs & stand for long durations Basic math skills (addition, subtraction, multiplication) GMP experience & machine troubleshooting skills

Thank you for your interest in PPC Flex. We are a Flexographic printing company, that has been located in the Hilliard Ohio area for over 45+ years. Our vision is to exceed the expectations of our customers and suppliers by providing industry-leading service, quality, bring new product innovation at the lowest cost possible and to deliver unique packaging solutions by leading with a culture of continuous improvement. To achieve our vision, we are seeking the best and brightest talent to join us to be a recognized employer of choice. We are looking for experienced machine operators, if you are interested please upload your resume when applying. ** FULL TIME ** 2nd SHIFT OR 3rd SHIFT OPENINGS ** STARTS AT $21 - $23/HR, BASED ON EXPERIENCE **PERFORMANCE BASED PAY RAISES AND BONUS PROGRAM ELIGILBILITY AFTER FIRST 90 DAYS **FULL BENEFITS OFFERED AFTER 45DAYS. MEDICAL, DENTAL, VISION, 401k,LIFE INSURANCE **COME JOIN OUR TEAM!! REQUIRED SKILLS: *Several years (2+) of Machine Operating experience in the Manufacturing or Industrial setting. *Willingness to learn and complete our training program successfully. *Excellent Attendance *Good verbal and written communications skills. *Good with Computer work and understanding Technology. *Attention to detail with a high degree to accuracy. *Effective Team Player WORKING CONDITIONS AND/OR PHYSICAL REQUIREMENTS: *Operate various flexible packaging manufacturing machines. (Laminator, Slitter) *Must be able to lift and ensure proper handling of items up to 75 pounds. *Must have the physical dexterity to bend, stand, flex, and reach as the position dictates. *Work in a Manufacturing environment. *Must be able to distinguish and ensure product quality in a fast-paced production environment. *Follow all machine safety guidelines and company policies. *Follow all job and work instructions. *Must be able to work overtime as needed.

Thank you for your interest in PPC Flex. We are a Flexographic printing company, that has been located in the Hilliard Ohio area for over 45+ years. Our vision is to exceed the expectations of our customers and suppliers by providing industry-leading service, quality, bring new product innovation at the lowest cost possible and to deliver unique packaging solutions by leading with a culture of continuous improvement. To achieve our vision, we are seeking the best and brightest talent to join us to be a recognized employer of choice. We are looking for experienced machine operators, if you are interested please upload your resume when applying. ** FULL TIME ** 2nd SHIFT OR 3rd SHIFT OPENINGS ** STARTS AT $21 - $23/HR, BASED ON EXPERIENCE **PERFORMANCE BASED PAY RAISES AND BONUS PROGRAM ELIGILBILITY AFTER FIRST 90 DAYS **FULL BENEFITS OFFERED AFTER 45DAYS. MEDICAL, DENTAL, VISION, 401k,LIFE INSURANCE **COME JOIN OUR TEAM!! REQUIRED SKILLS: *Several years (2+) of Machine Operating experience in the Manufacturing or Industrial setting. *Willingness to learn and complete our training program successfully. *Excellent Attendance *Good verbal and written communications skills. *Good with Computer work and understanding Technology. *Attention to detail with a high degree to accuracy. *Effective Team Player WORKING CONDITIONS AND/OR PHYSICAL REQUIREMENTS: *Operate various flexible packaging manufacturing machines. (Laminator, Slitter) *Must be able to lift and ensure proper handling of items up to 75 pounds. *Must have the physical dexterity to bend, stand, flex, and reach as the position dictates. *Work in a Manufacturing environment. *Must be able to distinguish and ensure product quality in a fast-paced production environment. *Follow all machine safety guidelines and company policies. *Follow all job and work instructions. *Must be able to work overtime as needed.

**High Speed Machine Operators - 3rd Shift (Train on 1st)** As a premier manufacturer of wire mesh and steel products for multiple industries, including the material handling industry, AIS Manufacturing is committed to delivering high value to its clients on a continuous basis. We offer a competitive salary, great insurance benefits, paid medical insurance, paid short term disability insurance, paid life insurance, paid vacation, holidays, and sick time, 401(K) with 100% employer match of the first 3% employee contribution and then 50% of the next 2%, subject to terms and conditions. SUMMARY Responsible for safely operating high-speed machines, machine set-up, troubleshooting machines, handling materials, and use of other assigned tools. Ensure a safe and clean environment at all times. AIS Manufacturing offers a four-day work week (Mon-Thurs 10-hour shifts) + overtime opportunities! PRIMARY RESPONSIBILITIES - Responsible for advanced operation of our most vital machines, and handling of materials. - Keep assigned area to include spare parts shelves and tools organized and clean at all times. - Perform assigned tasks in a timely and orderly manner. - Ensure quality of work by performing all required quality checks. - Maintain safe work practices and environment at all times. - Operates machine, troubleshoot and complete minor machine adjustments following standard operating procedures. - Completes equipment and machine preventative maintenance. - Assists in machine changeovers. - Communicate as necessary with team leaders, coordinators and coworkers. - Work safely at all times; abiding by all O.S.H.A. regulations. - Ensure that order commitments are met. - Promote continuous improvement through input and feedback. - Able to read and interpret blueprints. - Ability to troubleshoot machine quality/productivity issues. - Able to utilize production schedule for next job. - Prepare materials for upcoming jobs. - Ability to change tooling, coopers, shunt cables, etc. - Complete Production Sheets & Quality Checks accurately. - Must be experienced with LOTO. - Additional duties as assigned by leads, coordinators and management. KNOWLEDGE AND SKILL REQUIREMENTS - 3+ years machine operator experience in a technical set up role, in a manufacturing environment. - Mechanical aptitude is a must, as well as the ability to perform basic mathematical functions. - Must be familiar with computer operated equipment. - Must be able to communicate technical information of machinery, i.e., speed, pressure, feed, torque. - Must be able to determine what acceptable machinery performance is and communicate the steps to bring machinery performance into standard. - Must be able to read and follow multistep procedures. - Must be able to use a caliper, micrometer, and a tape measure. - Must be able to read and understand measurements written in decimal form. - Ability to work while standing for long periods (10-hour shifts) to include heavy lifting of material. - Can work successfully in a team environment and/or independently and is able to take direction from others. **- Heavy lifting (up to 60 pounds) of materials, bending, and stooping will be required throughout shift assigned.** **Job Type & Location** This is a Contract to Hire position based out of Columbus, Ohio. **Pay and Benefits** The pay range for this position is $20.00 - $24.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in Columbus,OH. **Application Deadline** This position is anticipated to close on Mar 21, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Department: Production Reports to: Manufacturing Manager Employment Status: Hourly Non-Exempt (12-Hour Rotating Shifts) Shifts: Days 5:50am - 6pm, Nights 5:50pm - 6am Pay: $17.00 - $20.00 / hr (Night Shift + 10% Shift Differential) About Engineered Profiles We are a mid-sized, privately owned company valuing professional growth and personal development. Engineered Profiles is seeking mechanically inclined individuals we can train to run Plastic Extrusion lines. Through completion of our training matrix and strong job performance our most skilled extrusion operators can make up to $33 an hour. Starting pay is based on the level of experience a candidate has and will be assessed through a test given by one of our process technicians. Our shifts run on a two-week rotating schedule (basically two days on, two days off, with three-day weekends). We're a 24/7 environment. The Extrusion Operator is responsible for setting up the extrusion line, operating, tear down, quality checks, and production reporting. Benefits: Double-time for all overtime in 2024 3 medical plans. Optional voluntary benefits - Dental, Vision, Life, Accident insurance and more. The company pays for a portion of these benefits. 401k Retirement Plan- Company matching. Quarterly Profit-Sharing Bonus. Casual Dress Code (Jeans, t-shirts, shorts, sweatshirts... ect) Paid Time Off- Prorated during employees first year of employment. Annual $100 shoe allowance for safety toed shoes. Matrix- Employee Assistance Program. Morrow- Free financial coaching Job Summary:. To set-up and operate necessary equipment to produce a custom extruded profile that will meet or exceed the customer's expectations. Essential Duties and Responsibilities: Ability to set-up equipment (dies, screws, downline equipment, etc.) to make line production capable. Be able to start up all machinery and equipment while making any adjustments necessary to obtain a high quality extruded product. Assume responsibility for safety and housekeeping by following all safety rules, reporting safety hazards, and maintaining a clean work area. Assume responsibility for quality of extruded products by completing check sheets, color checks, SPC (Statistical Process Controls) computer data entry, and any other special reports that may be required. Assume responsibility for packaging quality by insuring that required packing materials are available and products are packed correctly. Assist in the training of new trainees by sharing knowledge and information. Perform other duties as assigned. Qualifications, Education and/or Experience: High school diploma or GED required Some manufacturing and/or technical experience desirable. Must be able to use a tape measure, length gauge, and precision measuring instruments such as calipers, micrometers, and various quality gauges. Must have good mechanical aptitude and acceptable math skills (i.e., division, multiplication, fraction to decimal conversion, etc.) Must possess basic knowledge of raw materials (virgin, regrinds, colorants, etc.) used in extrusion process. Physical/Mental Demands: Displays consistent desire to do more than is asked to help coordinate processes in order to get the job done Ability to handle multiple tasks and time sensitive work that can change rapidly Must be able to work while standing for long periods. Be able to lift and move heavy (70 lbs.) equipment and supplies Able to work all shifts as needed Engineered Profiles LLC provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws.

OUR COMPANY As a premier manufacturer of wire mesh and steel products for multiple industries, including the material handling industry, ITC Manufacturing is committed to delivering high value to its clients on a continuous basis. We offer a competitive salary, great insurance benefits, paid medical insurance, paid short term disability insurance, paid life insurance, paid vacation, holidays, and sick time, 401(K) with 100% employer match of the first 3% employee contribution and then 50% of the next 2%, subject to terms and conditions. SUMMARY Responsible for safely operating high-speed machines, machine set-up, troubleshooting machines, handling materials, and use of other assigned tools. Ensure a safe and clean environment at all times. ITC Manufacturing offers a four-day work week (Mon-Thurs 10-hour shifts) + overtime opportunities! PRIMARY RESPONSIBILITIES Responsible for advanced operation of our most vital machines, and handling of materials. Keep assigned area to include spare parts shelves and tools organized and clean at all times. Perform assigned tasks in a timely and orderly manner. Ensure quality of work by performing all required quality checks. Maintain safe work practices and environment at all times. Operates machine, troubleshoot and complete minor machine adjustments following standard operating procedures. Completes equipment and machine preventative maintenance. Assists in machine changeovers. Communicate as necessary with team leaders, coordinators and coworkers. Work safely at all times; abiding by all O.S.H.A. regulations. Ensure that order commitments are met. Promote continuous improvement through input and feedback. Able to read and interpret blueprints. Ability to troubleshoot machine quality/productivity issues. Able to utilize production schedule for next job. Prepare materials for upcoming jobs. Ability to change tooling, coopers, shunt cables, etc. Complete Production Sheets & Quality Checks accurately. Must be experienced with LOTO. Additional duties as assigned by leads, coordinators and management. KNOWLEDGE AND SKILL REQUIREMENTS 3+ years machine operator experience in a technical set up role, in a manufacturing environment. Mechanical aptitude is a must, as well as the ability to perform basic mathematical functions. Must be familiar with computer operated equipment. Must be able to communicate technical information of machinery, i.e., speed, pressure, feed, torque. Must be able to determine what acceptable machinery performance is and communicate the steps to bring machinery performance into standard. Must be able to read and follow multistep procedures. Must be able to use a caliper, micrometer, and a tape measure. Must be able to read and understand measurements written in decimal form. Ability to work while standing for long periods (10-hour shifts) to include heavy lifting of material. Can work successfully in a team environment and/or independently and is able to take direction from others. Heavy lifting (up to 60 pounds) of materials, bending, and stooping will be required throughout shift assigned. Punctuality a must. Self-Starter, Team Player. Quality driven in all aspects of the role. Formal technical training a plus. ITC Manufacturing offers an excellent benefit package and paid time off! Benefits 401(k) with 100% company match Health Insurance to include Medical (2 plans with company paid premiums!), Dental and Vision Disability insurance Employee assistance program Life insurance Paid time off Referral program 4-Day work week + overtime opportunities Company paid Safety Boots Program annually. Company paid prescription safety glasses. Tuition Reimbursement SHIFT: 3rd Shift Monday-Thursday 8:30pm-7am Training will be on 1st shift Monday-Thursday 7am-5:30pm for up to 4 weeks. Competitive pay commensurate with skill set. A mechanical aptitude test is required for selected candidates.

Job Title: Assistant Machine Operator The Assistant Machine Operator will safely operate, change over production equipment, and direct production line personnel to ensure the handling, inspection, and packing of finished products into erected shipping container boxes to be sealed and processed to the Stacker or Robot for palletizing. Reporting Responsibilities• Reports to the Production Supervisor.Supervisory Responsibilities • Indirect - Provide production-related direction to personnel working on assigned production lines.Duties/Responsibilities A. Safety• Responsibilities in this area are to comply with safety rules and to report any unsafe conditions to the production supervisor immediately.B. Quality• Ability to multi-task and perform the list of checks for product quality as defined by Standard Operating Procedure(s) (SOP).• Ability to accurately take counts, weights, and measures of the product per specification sheet.• Always check for flaws in the seals and bag and understand what the requirements of good seals are.C. Productivity1. Responsibilities in this area include a. Able to perform the position of Stacker and Packer at a high level.• Knows how to pack all types of products with proper counts and according to the SOP.b. Can step up and monitor the machine to ensure the quality of the product is being maintained.• Can measure bag length and width and confirm it matches the specification sheet.• Understands the use of scale and can determine if the weight of the bag matches the tolerance on the specification sheet.• Can calculate bags per minute (BPM).• Knows what good end seals and back seals are.• Knows how to check seals to ensure they will not leak.• Knows if the print on the bag is centered and of correct quality.• Knows if inkjet print on the finished box matches up to the product number and that the date and time are current. Must also verify print clarity.2. Equipment• Can perform roll changes to the SOP• Knows how to identify problems in product or machine and knows how to shut the machine down and get help at a minimum.• Able to perform minor preventative maintenance on machines.• Able to perform minor troubleshooting and corrective maintenance on machines. Required Skills/Abilities• Ability to follow directions and work well in a team.• Ability to read English to interpret and translate standard operating procedures.• Thorough understanding of or the ability to quickly learn production equipment.• Understanding of and the ability to abide by applicable state safety and environmental regulations.Requirements• Basic math and counting skills; must “Pass” verbal math test by reading questions out loud to show reading and comprehension ability as well as showing methods for solving word problems.• Ability to identify basic tools.• Ability to think outside the box and be aware. For example, if parts are running low you must be able to trigger reorders.• Ability to communicate effectively with people.• Skills to manage time effectively with the many tasks throughout the day.• Shows willingness to be flexible and take on assignments that may be outside job requirements. Education and Experience • High school diploma or equivalent required.• At least two (2) years of related experience minimum.• Completion of “on-the-job” training may be substituted for education and experience requirements.

Every day, Global Payments makes it possible for millions of people to move money between buyers and sellers using our payments solutions for credit, debit, prepaid and merchant services. Our worldwide team helps over 3 million companies, more than 1,300 financial institutions and over 600 million cardholders grow with confidence and achieve amazing results. We are driven by our passion for success and we are proud to deliver best-in-class payment technology and software solutions. Join our dynamic team and make your mark on the payments technology landscape of tomorrow. Shift: This position is for D shift, Friday to Monday (4:45 pm - 2:45 am) Summary of This Role Sets up and operates a variety of automated machines (e.g. several different folders, Muller, die cutter or cutter) used in the production of the company's product. Responsible for the overall operation of machinery including actions such as feeding, folding ,cutting, stitching of materials, adjusting settings, making minor repairs and pulling, inspecting and packaging finished product. What Part Will You Play? Begins to learn the functionality of various Finishing machines (e.g. folder, Muller, die cutter, guillotine cutter, saddle stitcher, etc.) and processes by locating the correct job materials/tickets on the finishing floor and reviewing job specification sheet(s) to complete finishing work for assigned jobs, as directed. Reviews production samples with leadership and/or senior level operator during production to ensure adherence to client specifications and quality checklists. Packages finished product in cartons, boxes, or pallets, as directed and reviews completed packaging with more experienced operators to ensure adherence to ticket instructions, prior to routing for shipment. Learns to document/enter job information such as material usage/scrap and production time required for cost tracking/client billing. What Are We Looking For in This Role? Minimum Qualifications High School Diploma or Equivalent Typically No Relevant Experience Required Preferred Qualifications Prefer 2 years fast production machine experience. What Are Our Desired Skills and Capabilities? Skills / Knowledge - Acquires and applies job skills and learns company policies and procedures to complete assigned routine tasks. Job Complexity - Works on assignments that are routine to semi-routine in nature, requiring limited decision outside of stated processes, but recognizes the need for occasional deviation from accepted practice. Has little or no role in the decision-making. Supervision - Normally receives detailed instructions and follows established procedures on all work, requires instructions on all assignments. Works under close supervision. The position listed in this requisition is ineligible for the referral bonus award program. This job description may not be inclusive of all assigned duties, responsibilities, or aspects of the job described, and may be amended at any time at the discretion of the Global Payments/TSYS. Global Payments Inc. is an equal opportunity employer. Global Payments provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex (including pregnancy), national origin, ancestry, age, marital status, sexual orientation, gender identity or expression, disability, veteran status, genetic information or any other basis protected by law. Those applicants requiring reasonable accommodation to the application and/or interview process should notify a representative of the Human Resources Department Global Payments offers a comprehensive benefits package to all of our team members, including medical, dental and vision care, EAP programs, paid time off, recognition programs, retirement and investment options, charitable gift matching programs, and worldwide days of service. To learn more, review our Benefits page at: **************************************************************** Global Payments Inc. is an equal opportunity employer. Global Payments provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex (including pregnancy), national origin, ancestry, age, marital status, sexual orientation, gender identity or expression, disability, veteran status, genetic information or any other basis protected by law. If you wish to request reasonable accommodations related to applying for employment or provide feedback about the accessibility of this website, please contact ******************.

OUR COMPANY As a premier manufacturer of wire mesh and steel products for multiple industries, including the material handling industry, ITC Manufacturing is committed to delivering high value to its clients on a continuous basis. We offer a competitive salary, great insurance benefits, paid medical insurance, paid short term disability insurance, paid life insurance, paid vacation, holidays, and sick time, 401(K) with 100% employer match of the first 3% employee contribution and then 50% of the next 2%, subject to terms and conditions. SUMMARY Responsible for safely operating high-speed machines, machine set-up, troubleshooting machines, handling materials, and use of other assigned tools. Ensure a safe and clean environment at all times. ITC Manufacturing offers a four-day work week (Mon-Thurs 10-hour shifts) or three-day work week (Fri-Sun 12-hour shifts) + overtime opportunities! PRIMARY RESPONSIBILITIES Responsible for advanced operation of our most vital machines, and handling of materials. Keep assigned area to include spare parts shelves and tools organized and clean at all times. Perform assigned tasks in a timely and orderly manner. Ensure quality of work by performing all required quality checks. Maintain safe work practices and environment at all times. Operates machine, troubleshoot and complete minor machine adjustments following standard operating procedures. Completes equipment and machine preventative maintenance. Assists in machine changeovers. Communicate as necessary with team leaders, coordinators and coworkers. Work safely at all times; abiding by all O.S.H.A. regulations. Ensure that order commitments are met. Promote continuous improvement through input and feedback. Able to read and interpret blueprints. Ability to troubleshoot machine quality/productivity issues. Able to utilize production schedule for next job. Prepare materials for upcoming jobs. Ability to change tooling, coopers, shunt cables, etc. Complete Production Sheets & Quality Checks accurately. Must be experienced with LOTO. Additional duties as assigned by leads, coordinators and management. KNOWLEDGE AND SKILL REQUIREMENTS 3+ years machine operator experience in a technical set up role, in a manufacturing environment. Mechanical aptitude is a must, as well as the ability to perform basic mathematical functions. Must be familiar with computer operated equipment. Must be able to communicate technical information of machinery, i.e., speed, pressure, feed, torque. Must be able to determine what acceptable machinery performance is and communicate the steps to bring machinery performance into standard. Must be able to read and follow multistep procedures. Must be able to use a caliper, micrometer, and a tape measure. Must be able to read and understand measurements written in decimal form. Ability to work while standing for long periods (10-hour shifts) to include heavy lifting of material. Can work successfully in a team environment and/or independently and is able to take direction from others. Heavy lifting (up to 60 pounds) of materials, bending, and stooping will be required throughout shift assigned. Punctuality a must. Self-Starter, Team Player. Quality driven in all aspects of the role. Formal technical training a plus. ITC Manufacturing offers an excellent benefit package and paid time off! Benefits 401(k) with 100% company match Health Insurance to include Medical (2 plans with company paid premiums!), Dental and Vision Disability insurance Employee assistance program Life insurance Paid time off Referral program 4-Day work week + overtime opportunities Company paid Safety Boots Program annually. Company paid prescription safety glasses. Tuition Reimbursement SHIFT: 3rd Shift Monday-Thursday 8:30pm-7am OR 1st Shift Friday-Sunday 7am-7:30pm Training will be on 1st shift Monday-Thursday 7am-5:30pm for up to 4 weeks. Competitive pay commensurate with skill set. A mechanical aptitude test is required for selected candidates.

1917 Joyce Avenue, Columbus, Ohio 43219 Work Shift: 12hr - D Shift W-Sa Columbus (United States of America) The Machine Operator will operate blow-mold/PET/injection molding machines, grinders, trimmer machines, and conveyor systems. Role is responsible for troubleshooting process problems and performing minor maintenance to ensure continued operation of the production line. The Machine Operator is also responsible for following our company's Good Manufacturing Practices. Responsibilities include, but are not limited to the following: * Demonstrates safe work practices by wearing correct PPE and following safety policies * Demonstrates punctuality and adheres to work schedule. * Demonstrates a One Team Cross Functional attitude by working well and effectively with others * Embraces and participates in continuous improvement processes to drive change within the plant. * Adheres to company General Manufacturing Policies * Ensure compliance with corporate and plant safety standards and with applicable laws and regulations issued by regulatory agencies. * Keeps the work area clutter free, clean, and organized. * Introduction to preventive maintenance, mold, neck and blow pin and other mechanical changes. * Operate blow-mold/PET/injection molding machines (including wheels, reciprocating or shuttle machines) to ensure production of quality bottles. * Adhere to quality control and to blow mold process procedure. * Introduction to troubleshooting and resolving process problems. * Performs bottle inspections, such as drop tests for designated lines. * Inspects the quality of bottles during production, packaging and labeling. * Perform audits, weights and quality checks. Machines may vary by site. * Make adjustments to meet product specifications. * Troubleshoot and perform minor repair on blow-mold and support equipment. * Immediately escalates all bottle abnormalities, defects and quality issues when found. * Monitor supply levels of packaging materials and replenish as needed. * Pick up dropped bottles, place into bins and if needed into grinder. * Ensure correct labeling, bottle description and packaging of product in accordance with specific customer requirements. * Move finished goods to designated area. * Prepare & document daily production reports, including rejects, regrinds, line efficiencies and other. * Prepare maintenance request forms and document equipment repairs. * Receives instructions on specific job task by Lead Operator or Supervisor. Assistance is furnished on unusual problems and work is reviewed for application of sound professional judgment. * Other duties as assigned by management. * Duties may differentiate by plant based on equipment and plant design. QUALIFICATIONS: The requirements listed below are minimum requirements for the job. Reasonable accommodation may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job, unless such accommodation would impose an undue hardship on the Company. EXPERIENCE: * Basic mathematical skills are required. * Basic computer experience. * Blow mold experience. EDUCATION: * Prefer High School diploma or general education degree (GED). TRAINING: * Completion of Altium Production/Machine Operator training within 90 days of hire date. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities who are otherwise qualified to safely perform the essential functions of the job unless such accommodation would impose an undue hardship on the Company. While performing the employee is frequently required to stand; walk; use hands to grasp, handle, or feel; reach out, over and below with hands and arms. The employee is occasionally required to climb, balance, stoop, kneel, crouch, and or crawl. The employee frequently is required to lift, push, pull, and/or move up to 50 pounds. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts in a production environment. The noise level in the work environment is usually loud. Temperatures inside the plant can fluctuate between hot and cold according to seasonal changes. Personal protective equipment (PPE) is required in the production department and other designated areas. Altium Packaging, Our Culture Differentiates Us! We incorporate our Guiding Principles into all aspects and at all levels of the organization and use them as a framework for decision-making. We believe our Guiding Principles foster a culture of excellence that benefits both employees and customers. Our Guiding Principles * Act with Integrity & in Compliance * Drive Value Creation * Be Disciplined Entrepreneurs * Focus on the Customer * Act with Humility * Treat others with Dignity and Respect * Seeking Fulfillment in your Work We Believe in Rewarding our Most Important Resource - Our People! We show our commitment to Total Rewards by providing a competitive, comprehensive benefits package. In addition to medical, dental and vision plans, company holidays and vacation days, tuition reimbursement, learning and training opportunities, bonus potential, and a 401(k) plan with company contributions, Altium Packaging locations offer rewards and recognition programs and opportunities to make a difference in the community. EEO Statement We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Take your career to the next level at Altium Packaging!

As a Full Time Equipment Operator with APTIM, you will operate excavator, off road truck skid loader, man lift and extend a boom forklift fusion machines for installation of HDPE piping at the landfills we do our projects on. **Key Responsibilities/Accountabilities:** + Follow all maintenance and safety procedures. + Connect sections of pipe, using HDPE welding machines and PVC pipe with Glue and primer. + Maintain and adjust machinery to ensure proper performance. + Operate off road trucks and excavators on side slopes. + Measure materials or objects for installation or assembly. + Mix substances or compounds needed for work activities. + Repair or replace defective parts of machinery, such as rotary drill rigs, water trucks, air compressors, and + pumps using hand tools. + Install well heads and valves + Proficiently operates hand and foot levers to insure proper operation of assigned equipment. + Strong knowledge of safely operating assigned equipment. + Uses time effectively; anticipates obstacles, adjusts priorities as needs change and keeps others informed of progress. + Excellent interpersonal skills, be self-motivated, and be adaptable in a fast paced, dynamic, deadline-driven environment. + Strong written and oral communication. + Strong time management and organizational skills. **Basic Qualifications:** + Must have at least 3 years of experience being an Equipment Operator + High School Diploma or Equivalent **PHYSICAL** **REQUIREMENTS:** Strength: Standing 50% Walking 20% Sitting 30% Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching Handling C Fingering C **Explanation for Symbols:** NP=Not Present, O=Occasionally (0-33%), F= Frequently (34-66%), C=Constantly (67-100%) \#LI-BN1 \#LI-ONSITE Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled Applicants with a physical or mental disability who require a reasonable accommodation for any part of the application or hiring process may make their request known by e-mailing ********************************** or calling ************ for assistance. EOE/Vets/Disability

Keep the world's supply chain moving. That's what the Watco team does every day at our short line railroads, switching sites, terminals, ports, and logistics hubs. Whether you're at one of these locations or in a support-services role, there's one thread that ties everyone together. We're all on the same team. One Watco. Here's what you can expect from Watco: Award-winning culture recognized by Forbes and Newsweek Competitive compensation and benefits Paid on-the-job training with peer trainers Operations training at the Safe Performance Center in Birmingham, Alabama Leadership and development programs offered through Watco University Career advancement opportunities $17.00-$18.00/hr BOE Schedule: 7:00 AM - 3:30 PM Duties and Responsibilities Must maintain regular, dependable attendance and a high level of performance Must be able to follow written and verbal instructions to complete assigned tasks on schedule Read, write, and communicate in English & understand basic math Learn from directions, observations, and mistakes and apply procedures using good judgment Complete all applicable documentation, recordkeeping and daily inventory Checking in drivers, getting samples from bulk railcars, and keeping the facility clean Some computer experience needed Must be able to bend, stoop, lift up to 50 pounds alone, twist, and climb. Must be able to talk and hear well enough to communicate with all team members, vendors, and customers 100% of the time Participate in safety briefings, job briefings, and pass along information from team members, management or customer Operate in a manner where SAFETY and the ENVIRONMENT are of the highest importance Climb onto top and underneath railcars in order to inspect, hook up, disconnect and seal Perform daily inspections on all stationary and mobile equipment Prepare equipment for product transfer. Start, stop, and operate equipment within defined operating parameters Perform all work in compliance with Company standards, procedures, and regulatory requirements Ability to work outside majority of the time and withstand extreme weather conditions Must be able to work with a team, take direction and follow work rules, as well as, take on additional job responsibilities as needed or assigned Flexibility to work overtime and weekends based on production needs Goal oriented and results driven Ability to learn and become proficient in all aspects of the operation Ability to perform physically demanding work Requirements High school diploma or equivalent Valid driver's license Mechanical aptitude Experience with comptuers Machines, Tools, Special Equipment, Personal Protective Equipment Used PPE; hard hat, vest(work clothes), safety glasses, gloves, steel toed boots, ear plugs and respirator

Company Profile: Networks Built Better. Congruex is a multi-national organization that specializes in broadband network construction and engineering. We support some of the largest service providers in the United States with a footprint that extends across the nation. Our turn-key design and build solutions allow our customers to deliver more data, more bandwidth, and ultimately support more devices for their end-users. Our diverse self-perform capabilities allow us to deliver high-quality telecommunications and utility solutions with efficiency as one combined end-to-end business. Congruex is a growing collection of subsidiary operating units. Our unified vision is to be the nation's largest end-to-end provider of network design, engineering, construction, and maintenance for broadband operators. We are One Congruex. Our Mission & Values It is our mission to satisfy our customers by providing the expertise, technology, and resources necessary to build better networks. Congruex is committed to the overall health, wellness, and safety of our people. We support diversity, inclusion, and the right to live freely with mutual respect. These values are ingrained in our core values of GRIT. At Congruex, GRIT is an acronym for guts, reliability, improvement, and teamwork - having the GUTS to do the right thing, being RELIABLE to deliver what we promise, IMPROVING ourselves every day, and embracing TEAMWORK together as One Congruex. Gudenkauf, a Congruex Company Gudenkauf is a diversified telecommunications, utility, and systems integration solution provider with the personnel, equipment, expertise, and experience to deliver even in the toughest and most complicated conditions. We offer a variety of services from outside plant construction, fiber optic splicing, and testing, utility locating, intelligent transportation systems, gas line cathodic protection, and emergency restoration services. We have grown to service the states of Ohio, and West Virginia, along with expanding into Kentucky, Indiana, Michigan, Virginia, and Pennsylvania. Job Summary: We are looking for an Underground Construction Operator to join our growing team. The Operator will be responsible for safely operating many types of construction equipment to dig around existing utilities. We are looking for experienced individuals with knowledge of the telecommunications construction industry Job Responsibilities (Including, but not limited to): Operate heavy machinery productively and safely in all conditions Review blueprints or specifications to determine work requirements Utilize different machines for placement and removal of dirt/debris Utilize machinery to guide and install cable • Represent Congruex in a positive and professional manner at all times Clean and maintain all company vehicles and equipment assigned for use Perform duties in standard and high-risk areas Safely and successfully perform duties all year round Perform physical tasks required to successfully complete day-to-day operations Travel overnight to various sites as requested Required Skills Valid Driver's License (unrestricted) Pass a pre-employment drug test and Motor Vehicle Record (MVR) At least 1 year of recent experience in heavy equipment operation Ability to operate and dig around existing utilities safely and productively Possess knowledge of utility depth and placement as well as general knowledge of construction practices and equipment Strong interpersonal communication skills with the ability to interact with the crew, leadership, and clients Function effectively as an integral part of a team Meet physical demands - lift and/or move 50 to 150 pounds Ability to perform all work outdoors, subject to inclement weather conditions Desired Qualifications CDL preferred, or willing to obtain one OSHA certified This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an “at-will” employment relationship.

Company Profile: Networks Built Better. Congruex is a multi-national organization that specializes in broadband network construction and engineering. We support some of the largest service providers in the United States with a footprint that extends across the nation. Our turn-key design and build solutions allow our customers to deliver more data, more bandwidth, and ultimately support more devices for their end-users. Our diverse self-perform capabilities allow us to deliver high-quality telecommunications and utility solutions with efficiency as one combined end-to-end business. Congruex is a growing collection of subsidiary operating units. Our unified vision is to be the nation's largest end-to-end provider of network design, engineering, construction, and maintenance for broadband operators. We are One Congruex. Our Mission & Values It is our mission to satisfy our customers by providing the expertise, technology, and resources necessary to build better networks. Congruex is committed to the overall health, wellness, and safety of our people. We support diversity, inclusion, and the right to live freely with mutual respect. These values are ingrained in our core values of GRIT. At Congruex, GRIT is an acronym for guts, reliability, improvement, and teamwork - having the GUTS to do the right thing, being RELIABLE to deliver what we promise, IMPROVING ourselves every day, and embracing TEAMWORK together as One Congruex. Gudenkauf, a Congruex Company Gudenkauf is a diversified telecommunications, utility, and systems integration solution provider with the personnel, equipment, expertise, and experience to deliver even in the toughest and most complicated conditions. We offer a variety of services from outside plant construction, fiber optic splicing, and testing, utility locating, intelligent transportation systems, gas line cathodic protection, and emergency restoration services. We have grown to service the states of Ohio, and West Virginia, along with expanding into Kentucky, Indiana, Michigan, Virginia, and Pennsylvania. Job Summary: We are looking for an Underground Construction Operator to join our growing team. The Operator will be responsible for safely operating many types of construction equipment to dig around existing utilities. We are looking for experienced individuals with knowledge of the telecommunications construction industry Job Responsibilities (Including, but not limited to): * Operate heavy machinery productively and safely in all conditions * Review blueprints or specifications to determine work requirements * Utilize different machines for placement and removal of dirt/debris * Utilize machinery to guide and install cable • Represent Congruex in a positive and professional manner at all times * Clean and maintain all company vehicles and equipment assigned for use * Perform duties in standard and high-risk areas * Safely and successfully perform duties all year round * Perform physical tasks required to successfully complete day-to-day operations * Travel overnight to various sites as requested Required Skills * Valid Driver's License (unrestricted) * Pass a pre-employment drug test and Motor Vehicle Record (MVR) * At least 1 year of recent experience in heavy equipment operation * Ability to operate and dig around existing utilities safely and productively * Possess knowledge of utility depth and placement as well as general knowledge of construction practices and equipment * Strong interpersonal communication skills with the ability to interact with the crew, leadership, and clients * Function effectively as an integral part of a team * Meet physical demands - lift and/or move 50 to 150 pounds * Ability to perform all work outdoors, subject to inclement weather conditions Desired Qualifications * CDL preferred, or willing to obtain one * OSHA certified This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor. Requirements are representative of minimum levels of knowledge, skills, and/or abilities. To perform this job successfully, the incumbent will possess the abilities or aptitudes to perform each duty proficiently. This document does not create an employment contract, implied or otherwise, other than an "at-will" employment relationship.