Inspector Jobs in Arizona

Fenagh Engineering and Testing is seeking a CWI Inspector with NDT to perform inspections for the shop/field. To include the following: audits, inspecting structural steel fabrication and erection, material identification, welding to include joint fit-up, in-process welding, completed welding, MT & UT as required by code, and high-strength bolting inspections. Ideally this candidate will be an AWS CWI with either their Level I or Level II UT/MT certification from an ASNT Level III. Evaluation from our Level III for both UT (shearwave)/MT will be conducted upon hiring. This is a long-term nested position. The position reports out of our Arizona office, located in Phoenix, AZ. Most of the work will be performed at various locations throughout the country. Locations are listed below. El Mirage, AZ Eloy, AZ Phoenix, AZ San Bernardino, CA Claremont, NH Henderson, NV Orchard Park, NY Dunmore, PA Sunnyside, WA Rothschild, WI Abilene, TX Dallas, TX San Angelo, TX Waller, TX Lindon, UT ICC / CWI / NDT - MT & UT Level II General Responsibilities: Perform observation and inspection in the shop & field. Collect MTR's for heat numbers and tracking. VT on members in progress. UT CJP's as needed. MT Fillet Welds as needed. High-strength bolting inspections & tests. Compile daily reports outlining inspections and reporting deficiencies (if any). Read and understand specific project plans and specifications. Communicate with project team regarding project requirements and inspection results. Requirements: AWS CWI Certification Level I or Level II UT (Shearwave). Level I or Level II MT. ICC Structural Steel & Bolting. Minimum 5 years of experience. High School Diploma or equivalent. General computer knowledge (Excel, Word, PDF). Able to travel to various locations. Benefits include company paid holidays, sick days, 2 weeks paid vacation, 100% health insurance premium, matching 401k plan. Salary is negotiable according to experience. We have a great culture defined as: Detail-oriented -- quality and precision-focused. Innovative -- innovative and risk-taking. Outcome-oriented -- results-focused with strong performance culture.

Job Title: AWS Certified Weld Inspector (CWI) Employment Type: Full-Time-Direct Hire Pay: $37.00-$44.00 hr We are seeking a highly skilled AWS Certified Weld Inspector (CWI) to join our team at a cutting-edge data center construction project in Queen Creek, AZ. The ideal candidate will be responsible for ensuring all welding activities comply with industry codes, project specifications, and safety regulations. This role requires a strong understanding of welding techniques, materials, and quality control procedures. Key Responsibilities: Perform inspections on structural and piping welds to ensure compliance with AWS D1.1, ASME, and other applicable codes. Verify welder qualifications and ensure proper procedures are followed. Conduct visual and non-destructive testing (NDT) to assess weld integrity. Maintain accurate inspection reports and documentation. Collaborate with contractors, engineers, and quality control teams to address welding-related issues. Ensure all welding activities align with safety and quality standards. Support project managers with technical insights and inspection updates. Assist in resolving non-conformance reports (NCRs) and implementing corrective actions. Qualifications: AWS Certified Weld Inspector (CWI) Certification (Required). Minimum 3-5 years of experience in welding inspection, preferably in data centers, industrial, or large-scale construction projects. Strong knowledge of AWS, ASME, and other relevant welding codes. Experience with visual inspection, NDT methods (UT, MT, PT, RT) is a plus. Ability to read and interpret blueprints, welding symbols, and specifications. Strong attention to detail and problem-solving skills. Excellent communication and documentation skills. Familiarity with safety and quality programs in construction environments. Must be authorized to work in the U.S. and able to pass background checks as required by the project. Preferred Qualifications: Additional NDT certifications (UT, MT, PT) preferred. Experience working in mission-critical facilities or data centers. OSHA 30-hour safety certification is a plus. Benefits: Competitive salary based on experience. Comprehensive benefits package including medical, dental, and vision. 401(k) retirement plan with company match. Paid time off and holiday pay. Professional development and training opportunities.

This is a leading company based in Tucson, AZ, with over 50 years of specializing in the manufacturing of complex machined castings, hog outs, and prototypes for the aerospace and electronics industries. . We pride ourselves on delivering high-quality solutions through a wide range of services.

NTS is Searching for a Quality Assurance Inspector Manager for a Full Time Direct Opportunity in Mesa, AZ. The Quality Assurance Manager is a key authority in all matters concerning processes and product quality as established by AS9110C, Engineering specifications, Government (DOD) and FAA regulations, and approved Quality Assurance Standards. In addition, provides continuous improvement for Maintenance and Logistic procedures. Education & Work Experience: 10 years of experience in Quality Assurance 5 years managing quality organization Bachelor degree preferred MUST have Aerospace experience- Preferably Fighter Aircraft. Certification/License Requirements: FAA A&P Certificate Required FAA Inspection Authorization Certificate Required AS9110C Lead Auditor training course Job Requirements: Aviation experience is required. Strong knowledge of AS9110C, FAA part 91 regulations and FAA Order 8130-2. Adaptability to listen, analyze, and convey new solutions to analyze project performance and client satisfaction results. International travel throughout the U.S. may be required. Ability to perform all work in support of our Corporate Values of Safety, Teamwork, Focus, Innovation and Integrity. Demonstrates strong and visible support of our values. Excellent verbal and written communication skills, including ability to effectively communicate with internal and external customers. Excellent computer proficiency (MS Software - Word, Excel, Outlook, PowerPoint, and Project). Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state and local standards. Must be able to lift and carry up to 50 lbs. Must be able to talk, listen and speak clearly on telephone. Special Work Conditions: Applicants selected may be subject to a Government security investigation and must meet the eligibility requirements to be cleared for and to gain access to applicable classified information. Eligibility requirements include U.S. nationals or permanent residents (Green Card). Additional Benefits: These are direct-hire positions with competitive pay and benefits 401(k) 401(k) matching Dental Insurance Health insurance Life insurance Paid time off Vision insurance

An Aircraft Maintenance Quality Control Inspector working at a Part 145 repair station is responsible for thoroughly inspecting aircraft, components and systems to ensure they meet FAA regulations and airworthiness standards, performing detailed checks during maintenance and repair processes, identifying defects, and approving the return to service of aircraft after repairs, while adhering to the repair station's Quality Control Manual, relevant maintenance documentation and Federal Regulations. Inspectors are charged with guaranteeing the safety and compliance of aircraft undergoing maintenance within the repair station. Essential Job Functions: Ensures all work is accomplished in accordance with companies RSQCM, manufacturer's maintenance manuals, and FAA regulations. Provide leadership for team members by establishing, assigning, prioritizing, and tracking maintenance goals, objectives, and standards; assists team members with coordination of personnel and equipment task assignments to ensure goals and objectives are met. Upon arrival of aircraft, makes sure that it is properly placed in the hangar, properly protected, and an incoming inspection of the aircraft is performed. Maintains and services aircraft. Analyses a variety of technical problems associated with aircraft maintenance, determines causes and methods of repair. Interprets technical manuals, blueprints, schematic diagrams, written and verbal information. Tests operation and repairs/adjusts, as required: engines, engine controls and accessories, propellers and controls, landing gear, hydraulic systems and servicing, flight controls and adjusts rigging as required. Checks repairs of fuel, oil, oxygen, heating, cooling, hydraulic and pressurization systems. Provide on the job training instructions and information on job procedures, safety and good work practices to aircraft mechanics. Keeps the Maintenance Manager advised of problems that could result in work delays. Take necessary action to ensure that maintenance personnel in his or her group are qualified to accomplish the duties assigned to them. Responsible for compliance with applicable federal regulations and guidelines Travels on road trips as required and is able to work unsupervised and handle any technical problem that may occur. Performs other duties as assigned. Required Qualifications: Must hold a current Airframe and/or Powerplant Certificate Three (3) or more years of supervisory experience preferred in the aircraft maintenance environment. Minimum of five (5) years of aircraft maintenance experience High school diploma or GED required. Strong organizational and time-management skills. Attention to detail and accuracy in record-keeping. Good working knowledge of applicable FAR's under Part 145 MRO operations. Experienced with aviation maintenance best practices and industry standards. Excellent communication and interpersonal skills. Proficient in using computer software for aircraft maintenance documentation. Physical Demands: Ability to walk and stand on level or inclined surfaces for extended periods of time. Ability to climb stairs, ramps, ladders, and work stands. Ability to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbows and knees, and reach above and below shoulders. Ability to lift, carry, push, and pull heavy objects up to 50 pounds. U.S. person or lawful permanent resident (green card holder) preferred due to ITAR regulations. Ability to work in a high noise-level environment. Ability to work in a variety of weather conditions, including hot, cold, wet, and dry environments. Ability to distinguish colors and read small print. Good hand-eye coordination and manual dexterity. Ability to work with hazardous materials, wearing appropriate personal protective equipment as necessary. Ability to wear a respirator or other required safety equipment for extended periods of time. Ability to work in confined spaces and at heights. Ability to work in a fast-paced environment with tight deadlines. Ability to maintain focus and attention to detail for extended periods of time. Ability to work effectively in a team environment. Possess or obtain required certifications and qualifications for working with specific aircraft, tools, or equipment. Language: Ability to read, write, speak and understand English.

About the Company: We are seeking a highly experienced and detail-oriented Senior Quality Control Inspector to join our team, specializing in steel fabrication. In this critical role, you will be responsible for overseeing and executing inspection processes to ensure compliance with quality standards, weld specifications, and project requirements. If you have a strong background in quality systems, a sharp eye for detail, and a deep understanding of steel fabrication, we encourage you to apply. About the Role: Key Responsibilities: Maintain and update weld logs and weld maps daily; track weld IDs in piping systems according to ISO standards. Perform detailed visual and dimensional inspections on fabricated steel products to ensure compliance with drawings, codes, and specifications. Utilize tools such as calipers, micrometers, and coordinate measuring machines (CMMs) for precision inspection. Identify defects, non-conformances, and inconsistencies; escalate quality concerns and support resolution. Collaborate with production, welding, and engineering teams to resolve quality issues and implement corrective actions. Conduct internal quality audits and ensure compliance with quality management systems, including ISO 9001. Accurately document inspection results, maintain detailed QC records, and generate inspection reports. Support continuous improvement initiatives by analyzing inspection data to identify trends and areas for process improvement. Train and mentor junior QC staff on inspection techniques and company procedures. Qualifications: Experience in quality control within a steel fabrication or manufacturing environment. In-depth knowledge of quality control principles, practices, and inspection techniques. Strong understanding of ISO 9001 quality management systems and standards. Proficient in the use of precision measurement tools and inspection equipment. Exceptional attention to detail with the ability to identify defects or abnormalities. Excellent communication and interpersonal skills to collaborate across departments. Strong organizational and documentation skills; able to prioritize and manage multiple tasks independently. Analytical mindset with the ability to interpret inspection data and suggest improvements. Experience with welding inspection or certification (e.g., AWS CWI) is a plus.

Responsible for the activities of inspecting, testing, and reporting on materials, processes, products, and finished goods to ensure conformance with company and customer specifications and quality standards using variable measuring instruments and techniques. Assists in receiving and assembly of products and creating on occasion. Reports to: Director of Quality Responsibilities: Documenting quality inspections, recording serial numbers and labels, etc. Engages in facility problem solving activities to reduce scrap, material reduction, increase capability, and productivity. Addresses daily quality concerns and questions. Offers recommendations as required. Troubleshoots manufacturing problems and quality issues. Works with Operations and Quality personnel to investigate, collect and analyze data to resolve and implement corrective action, where applicable. Work closely with operation teams to ensure process controls are in place and adequate to meet standard requirements. Responsible for accuracy and timely inspection/calibration of monitoring and measuring devices. Ensure that any non-conforming product is properly identified, quarantined, and communicated and documented. Examines material or product for defects such as cracks, pits, wiring, and damaged components, etc. Verifies specified dimensions/aspect requirements of product and/or material. Performs other job-related duties as required and assigned. Required Skills / Abilities: Ability to foster a common vision which supports the business goals; perseverance necessary to focus on and achieve long-term objectives; capability to orchestrate continuous change. Ability to understand complex business issues and provide appropriate, effective, technical solutions. Ability to comprehend regulatory requirements and technical documentation. Excellent verbal and written communication skills. Exemplary multi-tasking and organizational skills. Record of accomplishment of being a motivated self-starter. Knowledge of specific and general safety policies and procedures as relates to plant and position. Experience with Excel, Word, and Outlook. Ability to perform applicable test requirements using the following equipment: micrometer, caliper, dial indicator, and caliper, etc. Must be able to lift product, materials, and equipment as necessary to perform the job. Ability to add, subtract, multiply, and divide all units of measure, using whole numbers, common fractions, and decimals. Ability to read and write the English language. High School diploma/GED Ability to work independently with minimal direct supervision and resourceful. Ability to read and understand both electrical and mechanical drawings. Work Environment & Physical Responsibilities: Duties are performed in a loud production setting subject to extreme temperatures. Some duties may be required to be performed outside. Comfortable with repetitive movement, kneeling, crouching, and stooping. Requires using hands to handle, control, or feel objects, tools, or controls. Requires lifting up to 50 pounds while bending, twisting and/or standing. Education and Experience: Manufacturing: 2 years (Preferred) Quality inspections: 3 Years (Preferred) Experience or knowledge of quality control techniques such as ISO 9001, Six Sigma, TQM, Etc. Experience or knowledge of measuring devices such as meters, gauges, computers, calipers, and other measuring instruments. Physical Requirements: Must be able to lift up to twenty-five pounds at times. Benefits: Health, Dental, Vision Insurance 401k Paid Time Off Potential for Profit Sharing Culture: Bring your Best! Get the Job Done Win as a Team Deliver “Wow” Work Environment: May work in various settings at the Maverick Power facilities, in offices, in multiple shops, and in commercial buildings. Maintaining the same position or posture while performing tasks and sitting for extended periods. The above-noted is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the applicant a general sense of the responsibilities and expectations of this position. As the nature of business demands change so, too, may the essential functions of the position. EEO/AAP Statement We acknowledge and honor the fundamental value and dignity of all individuals. Maverick Power is an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based on race, religion, color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. The above is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or physical requirements. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Now Offering a $500 Sign-on Bonus! Bonus Terms: - Bonuses offered for a limited time only - Associate must be actively employed at the time of the payout - Bonus will be paid upon completion of 90 days of employment This position is responsible for taking post recon, distribution center, InSight OVE/Simulcast, and TRA photographs of vehicles as defined by Image Standards. This position will include responsibility for Photo Booth processing on the location. In addition, this position will require responsibility of assessing the condition of vehicles being sold at a fixed third party auction site and record any damage or repair required for the frame, paint, AC, radio, tires, etc. We process inspections using a mobile device equipped with proprietary inspection software that is convenient to use and easy to learn. This is a great opportunity to get some fresh air as much of our inspecting of vehicles happens outside. AiM is proud to operate a drug-free workplace. All new hires must complete a successful pre-employment background and drug screening. Benefits and Compensation: Our Inspectors are paid by the hour and not per vehicle! plus bonuses for meeting and exceeding production goals Health/Dental/Vision Insurance Paid Time Off 401k with Company match Company Paid Life Insurance and Long Term Disability Short Term Disability Employee Assistance Program Ongoing Education Portal What you will need: Valid state issued driver's license and safe driving record required Ability to work outside during all weather conditions Ability to bend, reach, stand, walk and lift up-to 20 lbs without difficulty Regular and consistent availability and attendance Willing to submit to a Background Check and Drug Screening A Plus: 1-3 years of experience in the automobile field (i.e, body mechanic shop, inspections, etc.) Auto body, paint and mechanical knowledge About AiM: AiM commenced operations in 2005 as a national provider of vehicle inspection services. Our unique perspective of the OEM/Financial industry, combined with state-of-the-art technology, has enabled us to develop even more superior services and products. We verify the condition of vehicles for dealerships, OEM's, finance companies, banks, fleet operators, auction houses and consumers buying/selling their cars. We are a consumer-focused company with Vehicle Inspectors operating in over 40 states across the nation. With over 1,200 employees, AiM provides coverage throughout North America and inspects 12,000,000+ vehicles annually. AiM is uniquely equipped with industry-leading customer service, competitive pricing, advanced IT solutions and a national footprint - all in the industry's first truly independent, objective, third-party inspection company. Come, be a part of our team! This job posting highlights the most critical responsibilities and requirements of the job. It's not all inclusive. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. AiM provides equal employment opportunity and prohibits discrimination or harassment of any type without regard to an applicant's race, color, sex, pregnancy, sexual orientation, age, physical or mental disability, medical condition, religion, national origin, gender identity or expression, genetics, veteran status or any other characteristic protected by federal, state or local laws. Applicants with disabilities may be entitled to reasonable accommodation under the terms of the Americans with Disabilities Act and certain state or local laws. A reasonable accommodation is a change in the way things are normally done which will ensure an equal employment opportunity without imposing undue hardship on AiM. Please inform us if you need assistance completing any forms or to otherwise participate in the application process. To comply with Federal law, Alliance Inspection Management LLC, participates in E-Verify. #P3 Experience Required 1 year(s): Consistent Full-Time Work Experience Preferred Vehicle claims adjustment Less than 1 year(s): Automotive Detail/Repair Education Required High School or better Preferred Technical/other training or better Licenses & Certifications Preferred Auto Service Auto Repair Skills Required Team Player Sense of Urgency Flexibility Detail Oriented Computer/Technical Literacy Communication Skills Analytical Ability to Multi Task

Consultant Engineering, Inc. (CEI) is an Arizona owned and operated professional engineering firm headquartered in Phoenix, Arizona with additional offices in Tucson and Gilbert, Arizona. As one of the Southwest's largest construction management firms, we also provide professional right of way (appraisals, acquisition and relocation services) and land surveying services. CEI offers competitive compensation and a comprehensive benefits package (medical, dental, vision, 401(k), life and AD&D insurance, disability insurance, paid holidays and PTO). CEI is hiring a Construction Inspector with experience in Water/Waste Water facilities construction.? Job Requirements This position will be based in Yuma, Az. and will provide construction oversight/inspection of civil water/wastewater facility improvements. Inspector will provide daily onsite observations of construction according to plans and specs. Inspection experience in the following: * Construction of water/wastewater collection/distribution facilities * Utilities, pipelines, drainage facilities, roadways * Document on daily diaries, maintaining all inspections, reports and quality of work. * Attend construction meetings with city and contractor. * Position will be in the Yuma, Arizona area. CEI has additional inspector work in Phoenix and the state of Arizona. * ACI, ATTI certs are required. This job description is not intended to be exhaustive of all duties and responsibilities. Employees are accountable for all duties within the role of this job and may also perform additional responsibilities as needed. Our company complies with federal and state disability laws and makes reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process or to perform essential job duties, please contact our HR Dept.

Join the industry leader to design the next generation of breakthroughs As a FAA Repair and Overhaul Analytical Inspector - Level 3 here at Honeywell, you will play a crucial role in ensuring the quality and compliance of our products. You will be accountable for inspecting and testing products at various stages of the production process, identifying any defects or non-conformities, and ensuring that all products meet the required standards. Your attention to detail and dedication to quality will contribute to the success of our manufacturing operations. You will report directly to our Quality Assurance Supervisor, and you'll work out of our Phoenix, Arizona location. In this role, you will impact the efficiency and reliability of our products, ensuring that they meet the highest quality standards and exceed customer expectations. KEY RESPONSIBILITIES * Inspect and test products at various stages of the production process * Identify and document any defects or non-conformities * Ensure that all products meet the required quality standards * Work with cross-functional teams to address quality issues and implement corrective action * Maintain accurate records and documentation of inspection results U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status. BENEFITS OF WORKING FOR HONEYWELL In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information: ******************************* The application period for the job is estimated to be 40 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. FAA REQUIREMENTS All applicants for placement in DOT/FAA safety-sensitive positions will be required to submit to a pre-employment drug test, testing for Marijuana, Cocaine, Amphetamines (amphetamine, methamphetamine, MDMA, MDA), Phencyclidine (PCP), and Opioids (codeine, heroin, morphine, oxycodone, oxymorphone, hydrocodone, hydromorphone). The DOT/FAA regulations require all employees, regular and temporary, in safety-sensitive positions, to be included in the Honeywell Anti-drug and Alcohol Misuse Prevention Plan. YOU MUST HAVE * Minimum of 3 years of experience in product inspection or quality control * Strong attention to detail and ability to identify defects or non-conformities * Knowledge of quality standards and inspection techniques * Ability to read and interpret technical drawings and specifications * Strong communication skills and ability to work effectively in a team environment WE VALUE * Associate's degree in a technical field * FAA A&P (Airframe and Powerplant) Certificate. * Experience in a manufacturing or production environment * Knowledge of ISO 9001 or other quality management systems * Certification in quality control or inspection ABOUT HONEYWELL Honeywell International Inc. (Nasdaq: HON) invents and commercializes technologies that address some of the world's most critical demands around energy, safety, security, air travel, productivity, and global urbanization. We are a leading software-industrial company dedicated to introducing state-of-the-art technology solutions to improve efficiency, productivity, sustainability, and safety in high-growth businesses in broad-based, attractive industrial end markets. Our products and solutions enable a safer, more comfortable, and more productive world, enhancing the quality of life of people around the globe. Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, care or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Additional Information * JOB ID: req486737 * Category: Integrated Supply Chain * Location: 1944 E Sky Harbor Circle,Phoenix,Arizona,85034,United States * Nonexempt * Due to US export control laws, must be a US citizen, permanent resident or have protected status. Engineering (GLOBAL) Honeywell is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status.

At Nox Group, we are dedicated to humanizing construction! Our enterprise owns and operates Corbins, RMCI, Nox Innovations, and Construction Labels. Our teammates, partners, and customers can expect that we genuinely care to serve them and look out for their best interests. As one of the fastest-growing industrial construction enterprises in the US and an industry leader in data centers, manufacturing, semiconductor, and water/wastewater treatment facilities, we continually look for people who are excited about personal growth and can contribute to our mission of being empowered thought leaders boldly changing the construction industry. We are currently seeking a Quality Control Inspector to support our QAQC Department team in Phoenix, Arizona. As a Quality Control Inspector, you will play an essential role in ensuring our installations comply with National and City codes, customer design specifications, and Corbins' expectation of “First Class Work”. You will be supporting the most challenging and exciting projects in the Southwest, including commercial, industrial, mission-critical and water/wastewater treatment facilities. Responsibilities Develop an understanding of the electrical project scope, quality requirements, quality plan, and quality documents pertaining to the assigned scope of work including applicable codes and standards. Coordinate with operations to schedule and perform quality inspections and tests to maintain production goals. Prepare inspection/test reports and maintain the quality files related to area of responsibility. Verify inspection and test compliance with applicable contract documents, codes, and standards. Correctly interpret and utilize codes and industry standards to determine compliance of the work. Assist the project team with completion of required test documentation. Organize quality documents and store per the company and project document management procedures. Identify, report, and correct nonconforming work in accordance with the company quality standards and the Project Quality Plan. Perform receiving inspection of permanent materials and plant equipment for project requirements as needed. Be involved in and provide quality input to task planning meetings. Examine/inspect field conditions and identify problems, inaccuracies, and cost saving measures that arise or that may be encountered. Take corrective actions as needed. Identify safety hazards you or other employees may be subject to and take all necessary corrective actions to eliminate or minimize hazards. Understand and respond appropriately to all safety hazards and warning devices (i.e. back-up alarms, smell of smoke, different colored warning tags, warning sirens) Understand and implement lockout/tagout procedures in safe manner. Qualifications 5+ years working in the industrial electrical industry. Experience maintaining effective communications (both orally and written) with supervisor, coworkers, and the project management team. Experience developing strong working relationship with supervisor, coworkers, and the project management team. Electrical code and standards knowledge Strong attention to detail and follow-through. Proficient in Microsoft Office software (Word, Excel, Outlook) Must be a self-starter, be organized, and have good interpersonal skills. Ability to complete tasks with minimal supervision. Ability to lift up to fifty pounds, unassisted, as required. Ability to work from various heights via ladders, scaffolds, aerial lifts, catwalks and other safe work platforms and area when necessary. Able to work a 40-hour work week, with overtime and off-hour shifts as required. Ability for stand for long periods of time in one place. Ability to walk job-sites throughout the day. Able to work in extreme weather conditions and elements, indoor or outdoor, including heat, cold, rain, mud, dust, and snow depending on the job location. Education/Certifications High school diploma or equivalent. Trade Certificate or college degree in education preferred or equivalent experience in construction training and development. Safety Level This is a safety sensitive position and all applicable policies including drug test and background check will apply. #NXCLIND1 It has been and continues to be the long-standing policy of any Nox Group operating company to provide equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. In addition to federal law requirements, Nox Group and all of its subsidiaries comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

SurePods, part of the DPR Family of Companies, is seeking an experienced Quality Control Inspector. This role is responsible for conducting daily production inspections, ensuring adherence to quality control procedures, and providing support to management on quality-related issues. The position also involves reviewing documentation for accuracy, conducting tests on materials and products, and helping improve quality processes while collaborating with departmental teams to enhance safety and product quality. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities * None. Duties and Responsibilities * Perform daily production inspections at various stages of the production line and completing necessary reports. * Provide support and guidance to Management as required on relative quality issues. * Review VOP's, work instructions, and blueprints for accuracy and effectiveness. * Help to improve existing as well as develop new quality processes and procedures. * Develop and conduct a variety of test on inbound materials from vendors and outbound products for shipping. * Conduct Root Cause analysis. * Ensure that all of the quality check procedures put in place by the company are followed during every production phase. * Create comprehensive documentation for quality issues and note the corrective actions that were taken. * Educate productions team on quality control issues and work with departmental managers to improve overall company safety and product quality. * Create processes checklist and coordinate inspections with departmental managers. * Responsible for final in-depth inspection before signing off and approving the product. More importantly, find the faults in both materials and the manufacturing process. * Demonstrate a commitment to a safety- first environment. Required Skills and Abilities * Strong attention to detail and the ability to read blueprints. * Effective written and verbal communication skills. * Ability to work with and assist others to maximize system effectiveness and efficiency. * Ability to build positive and effective relationships with co-workers. * Ability to read various gauges accurately (i.e. tape measurer, calipers and indicators). * A strong work ethic and a "can-do" attitude. Education and Experience * 2 to 5 years of experience in a QC/QA manufacturing or construction environment. * Required knowledge on tile installation/process and its products as the role will conduct daily inspection of tile within production. * Experience with Microsoft Office products to create reports and record data. * Experience with ISO quality system is a plus. Physical Requirements * Ability to work overtime to meet production schedules. Includes weekend shifts as needed. * This job involves walking, standing, bending, lifting, climbing, and stretching. * Use of hands and fingers to hold, grasp, push, and lift items. * Lifting requirements up to 40 lbs. * Dust, noise, and heat are common working conditions. * Occasional use of cleaning chemicals. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Ancla Plumbing, LLC.Quality Control Inspector Are you passionate about maintaining high standards and ensuring top-notch quality in construction projects? Ancla Plumbing, LLC is seeking a dynamic and detail-oriented Quality Control Inspector to join our rapidly growing team! Ancla Plumbing LLC, a locally owned and operated company, has been serving the Phoenix-Metro and surrounding areas in Maricopa and Pinal counties. We specialize in new plumbing installations for single-family homes, both for sale and for rent. Our success is built on the foundation of integrity, teamwork, excellence, safety, and a relentless drive to deliver defect-free homes on time. We are not just plumbers; we are the architects of dreams, crafting homes with care and precision. Learn more about us at: ***************************** As a Quality Control Inspector at Ancla Plumbing, LLC, you will play a crucial role in ensuring that our plumbing installations meet the highest standards of quality and compliance. You'll work closely with project managers, provide support and training to our plumbing technicians, and help drive process improvements across our operations. Responsibilities: Adapt and implement quality control standards in line with project requirements. Inspect plumbing workmanship, materials, and installations to ensure adherence to Ancla Plumbing's standards. Offer ongoing training and support to reinforce quality principles and best practices. Equip team members with the skills to identify and address quality issues proactively. Report any major issues to project managers without delay. Conduct thorough inspections of plumbing installations, components, and materials. Provide guidance and mentoring to plumbing technicians to enhance their skills. Identify opportunities for efficiency improvements and cost reduction. Use QC forms to document inspection results, including detailed notes and photographs. Ensure all phases of plumbing projects are inspected on time and thoroughly. Collaborate with the project team to review plans, specifications, and blueprints. Maintain up-to-date knowledge of industry trends, advancements, and regulatory changes. Conduct pre-construction meetings to discuss quality expectations and requirements. Ensure compliance with safety regulations and company policies. Qualifications: Minimum of 3 years of experience in the plumbing or construction industry. Strong knowledge of plumbing codes, standards, and best practices. Excellent communication and interpersonal skills. Detail-oriented with a strong focus on quality and compliance. Ability to work independently and as part of a team. Proficiency in using inspection tools and documentation processes. Positive attitude and a commitment to continuous improvement. Ability to read and interpret blueprints and technical documents. Strong problem-solving skills and the ability to handle multiple tasks simultaneously. Certification in plumbing or quality control is a plus. Compensation: Full Time Competitive salary at $65,000 - $75,000 per year, based on experience. Medical Dental Vision Life insurance. 401K with a 3% employer match. Paid vacation, sick time, holidays. Join us and be a part of a company that values integrity, teamwork, and excellence. Apply now and help us continue to build homes that stand as a testament to quality and craftsmanship.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-IF1

Requirements Complete ride out edits Understanding of FTTH plant design Quality control Inspection and contractor compliance Reconciliation of close out packages Cost control for the client and Conexon Understanding of NESC standards Production verification and invoice reconciliation with production General duties: Assist in promotion and sales of Conexon services Participation in weekly client conference calls Evaluate and advise on FTTH construction techniques Weekly status reporting General computer skills Company Benefits Include: Paid time off Full benefits (i.e. health, dental, and vision) Life insurance Long-term and short-term disability insurance Retirement benefits

SurePods, part of the DPR Family of Companies, is seeking an experienced Quality Control Inspector. This role is responsible for conducting daily production inspections, ensuring adherence to quality control procedures, and providing support to management on quality-related issues. The position also involves reviewing documentation for accuracy, conducting tests on materials and products, and helping improve quality processes while collaborating with departmental teams to enhance safety and product quality. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities None. Duties and Responsibilities Perform daily production inspections at various stages of the production line and completing necessary reports. Provide support and guidance to Management as required on relative quality issues. Review VOP's, work instructions, and blueprints for accuracy and effectiveness. Help to improve existing as well as develop new quality processes and procedures. Develop and conduct a variety of test on inbound materials from vendors and outbound products for shipping. Conduct Root Cause analysis. Ensure that all of the quality check procedures put in place by the company are followed during every production phase. Create comprehensive documentation for quality issues and note the corrective actions that were taken. Educate productions team on quality control issues and work with departmental managers to improve overall company safety and product quality. Create processes checklist and coordinate inspections with departmental managers. Responsible for final in-depth inspection before signing off and approving the product. More importantly, find the faults in both materials and the manufacturing process. Demonstrate a commitment to a safety- first environment. Required Skills and Abilities Strong attention to detail and the ability to read blueprints. Effective written and verbal communication skills. Ability to work with and assist others to maximize system effectiveness and efficiency. Ability to build positive and effective relationships with co-workers. Ability to read various gauges accurately (i.e. tape measurer, calipers and indicators). A strong work ethic and a “can-do” attitude. Education and Experience 2 to 5 years of experience in a QC/QA manufacturing or construction environment. Required knowledge on tile installation/process and its products as the role will conduct daily inspection of tile within production. Experience with Microsoft Office products to create reports and record data. Experience with ISO quality system is a plus. Physical Requirements Ability to work overtime to meet production schedules. Includes weekend shifts as needed. This job involves walking, standing, bending, lifting, climbing, and stretching. Use of hands and fingers to hold, grasp, push, and lift items. Lifting requirements up to 40 lbs. Dust, noise, and heat are common working conditions. Occasional use of cleaning chemicals. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

CONTINGENT ON CONTRACT AWARD*** POSITION OVERVIEW: The Quality Control Inspector inspects, repairs and modifications of aircraft structures, structural components, and engines. · Inspects and evaluates maintenance of aircraft components · Applies technical knowledge of airframe and power plant systems to diagnose equipment malfunctions. · Applies technical knowledge expertise to troubleshoot and restoring equipment condition and operation. · Provides guidance in aircraft repair and technical inspection according to directives, technical manuals, work standards and operational policies. · Contributes input to development and implementation of quality control and ground safety programs and ensures compliance with contract requirements. · Must be able to work without supervision, lead small groups independently, and provide written and oral briefings and updates to program leadership. · Performs other qualified duties as required. REQUIRED EDUCATION AND EXPERIENCE: · Demonstrated proven and verifiable aviation experience including ethics, ability and professionalism of the highest standards are required for this position. · Five years verifiable Turbine Powered Rotary Wing (RW) experience · Two years verifiable experience as an inspector performing Technical Inspector Duties. · Recent verifiable UH-60 Quality Control experience · Must possess a FAA Airframe and Powerplant Certificate REQUIRED SKILLS AND QUALIFICATIONS: · A U.S. Government SECRET Security Clearance is required. Must maintain a Secret Clearance for the duration of employment. · US Citizenship is required. · Must currently have or be capable of completing a criminal background check to access military installations and to obtain and maintain facility credentials/authorization. · Ability to communicate effectively orally and written. · Must have a valid driver's license / vehicle insurance to drive on base. · A broad level of knowledge of aircraft maintenance, inspection techniques, FAA regulations, and technical publications. · Ability to multi-task and employ problem-solving skills. · Ability to take the initiative in problem-solving and achieve organizational goals with minimal oversight. DESIRED SKILLS AND QUALIFICATIONS: · Proficient in Microsoft Office Suite Products · Basic computer data entry skills required for use of maintenance and logistics databases. · A valid FAA A&P Certificate is desired · A valid FAA Inspection Authorization (IA) is preferred · Ability to read, interpret, and comprehend schematic diagrams, drawings, charts, and technical publications.

The Aircraft Quality Control Inspector is responsible for ensuring that assigned aircraft are maintained within required specifications of 14 CFR Parts 43, 91 and 125 and other FAA and DOD regulations, OEM instructions and CBP directives as required and are airworthy before operation. Principal Accountabilities: + Inspect the work of Aircraft Mechanics performing maintenance repairs and modifies aircraft structures, aircraft engines, electrical, avionics and aircraft sub-systems. + Apply technical knowledge and expertise in determining proper equipment installation and operation. + Apply comprehensive technical expertise to assist the maintenance department to solve complex problems by interpreting technical documentation such as; blueprints or manufactures' manuals. + Make entries in aircraft logs and records and is responsible for providing guidance and technical expertise to lower level technicians throughout all aircraft modifications and/or maintenance efforts. + Perform the receiving, in-process, final quality, flight safety inspections and functional operational tests during organizational, intermediate and depot level maintenance, modification and repair of military tactical aircraft systems or associated components. + Approve or reject work accomplished by field team members to ensure compliance with customer specifications, standards and technical data. + Review and approve locally developed procedures and solutions to complex repair situations. + Perform analysis of defects and interprets quality control rejection and failure trends. + Monitor safety, training, and certification requirements. + Using checklists, perform daily work site Safety Inspections and Foreign Object Damage Inspections. + Monitor tool control programs, inspects and maintains records to ensure that measuring and test equipment meets calibration requirements. + Maintain Quality, Safety, Training and Certification Records. + Coordinate with the Customer Quality Assurance Representative concerning quality matters, mandatory inspection points and final acceptance inspection of contract end items or services. + Inspect forms and records related to aircraft maintenance. + The inspector monitors' the maintenance departments program, such as but not limited to, engine oil consumption, logs and records processes, hydraulic contamination, NDI, electrical static discharge, employee certification programs, confined space entry, tool control, foreign object damage, material control receiving inspections, weight and balance, fall protection and safety programs. + The inspector assists in the development and maintenance of ground and flight operation standard operating procedures, quality plan and safety plans. Assists maintenance in briefing and debriefing functional check flights. + Possess knowledge of basic computer skills sufficient to use Government computer system to access various technical references for airframe repairs and Government training requirements. + Document maintenance as per Quality Assurance (QA) and established regulatory requirements. + Comply with work order timekeeping system procedures. + Maintain high state of cleanliness and utilize a clean-as-you-go process when executing maintenance duties. + Perform weekly Foreign Object Damage (FOD) walk-downs. + Maintain situational awareness, stay cognitive-focused, and mitigate risks. + Comply with processes and procedures as per DHS/DOD documents and publications. + Immediately report missing, lost, found, or unattended tools to the supervisor. Maintain and control tools IAW tool control policy and instructions. Inventory and inspect tools on a regular basis to identify when to replace worn or broken tools and report the need for replacement tools to the supervisor. + Clean work area as necessary, assuring all hazardous materials are properly stored; Handle hazardous materials, expired materials and wastes in accordance with applicable laws and regulatory requirements. + Comply with safety rules and procedures and perform work in a manner that enhances the safety of the work area. Promptly report accidents, injuries, safety, violations, and/or unsafe practices or procedures to supervisor. + Perform weekly break room and smoking area cleaning duties. + Perform other duties as assigned. Minimum Requirements + Must be able to obtain and maintain a CBP Background Investigation Suitability clearance. Note: US Citizenship is required to obtain the clearance. + High School Diploma or equivalent is required. + Five (5) years of experience in multi engine propeller aircraft. + Valid Airframe and Power Plant (A&P) License required. + Valid FAA Inspection Authorization (IA) required. + Ability to obtain a Government flight line driver's license. + Possess a valid United States driver's license. + Possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. + Ability to read and interpret data is required. + Ability to read, write, speak and understand English. Physical Requirements/Working Environment: + Capable of performing tasks that frequently require: lifting, reaching, bending, walking, pulling, sitting, standing, crouching, stooping, kneeling, and stretching for prolonged periods of time. + Must be capable of performing tasks in cramped, awkward, and strained positions and/or climbing up and down ladders, work platforms, scaffolding, and aircraft structures. + Must be capable of carrying items up to 40 pounds or, for heavier objects, must seek assistance of other workers or weight lifting devices. + Must be capable of wearing cumbersome personal protective equipment for HAZMAT operations. + May be required to work night shifts. + May work in Aircraft maintenance hangar or outside. + Some domestic travel may be required. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, religion, color, sex, gender, national origin, age, United States military veteran's status, ancestry, sexual orientation, gender identity, marital status, family structure, medical condition including genetic characteristics or information, veteran status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal EEO laws and supplemental language at EEO including Disability/Protected Veterans (******************************************* and Labor Laws Posters (********************************************************* .

The opportunity Delaware North Parks and Resorts is seeking full-time Housekeeping Inspectors to join our team at Yavapai Hotel in Grand Canyon, Arizona. As a Housekeeping Inspector, you will be responsible for overseeing the total cleanliness of all rooms. If you are looking for a role offering fast-paced daily work and career growth opportunities, apply today. Pay $15.50 - $16.50 / hour Information on our comprehensive benefits package can be found at ********************************************** What we offer Health, dental, and vision insurance* 401k with company match* Paid vacation days and holidays* Paid parental bonding leave* Tuition or professional certification reimbursement* Weekly pay 50% off food in our restaurant, tavern, coffee shop, and deli 20% off retail and grocery items Referral bonus earn $200 for each eligible referral Training and development with opportunities for internal mobility and growth including the chance to work at our other locations nationwide *Available for full-time, year-round team members Life at the Grand Canyon Every day can be an adventure when you live and work at Grand Canyon National Park. Join our global team helping guests enjoy this natural wonder. Whether you want to work for a season or make the Grand Canyon your home, we have opportunities for anyone wanting to live and work in a National Park! Variety of low cost housing available for $50 - $75/ week including wi-fi, satellite TV, and all utilities Free laundry facilities Healthy work-life balance Community recreation center with gym and monthly outings Tons of activities with the South Rim of the Canyon only minutes away including camping, hiking, river rafting, star-gazing, and museums What will you do? Coordinates daily activities, assigns and plans staffing to ensure cleanliness of guest rooms and public areas. Inspects guest rooms and public outlets daily to ensure quality, completes reports. Ensures all maintenance requests are handled for guest rooms and department equipment. Prepares the weekly inventory, checks in all supplies, and reports any discrepancies. Assists with cleaning duties to cover staff shortages, and provides direct training to team members. Ensures safe work environment by following all company safety and security policies and procedures. Other duties as assigned. More about you Requires six months of previous housekeeping experience preferably in commercial cleaning or guest service. Previous supervisory experience preferred. Ability to work quickly under pressure, with high attention to detail. Follow instructions, read, write, and effectively communicate in English. Basic computer knowledge and ability to make math calculations. Working knowledge of cleaning equipment and tools. Physical requirements Requires ability to lift and carry 35 pounds with constant walking and standing for entire length of shift. Frequent climbing of stairs, bending, twisting, stooping, reaching, kneeling, and carrying items. Use of hands to operate cleaning equipment and complete cleaning tasks. Frequent exposure to varied outdoor climate including wind, sun, heat, cold, rain and snow. Exposure to and use of chemicals to clean and sanitize rooms, areas and equipment. Shift details Day shift Holidays Evenings as needed Weekends Overtime as needed Who we are Delaware North's operations in Grand Canyon National Park offer the opportunity to experience living and working in one of the natural wonders of the world. We provide a variety of employee housing options including shared trailers, apartments, dorm rooms, and houses, with amenities including a community center, free internet, workout, and recreational equipment. We also offer team member food and retail discounts. Our business is all about people, and that includes you. At Delaware North, youre not just part of a team youre part of a global legacy: a family-owned company with 100+ years of history behind it. Our operations span the world, offering you unique paths to growth and success. Who says you cant love where you work? With jobs in iconic sports arenas, stunning national parks, exciting casinos, and more, we pride ourselves on giving the world great times in great places. And whether youre interested in restaurants, hotels, sports, gaming, operations, or retail, part-time or full-time, were invested in helping you achieve your career goals. Together, were shaping the future of hospitality come grow with us! Delaware North, along with its subsidiaries, is an equal opportunity employer, showcasing job opportunities and considering applicants for all positions without regard to race, color, religion, sex, gender identity, national origin, age, disability, protected veteran status, sexual orientation, or any other legally protected status. $15.50 - $16.50 / hour RequiredPreferredJob Industries Other