Field Technician Jobs in Greenville, SC

Inspire health. Serve with compassion. Be the difference. Performs a variety of radiographic procedures applying ionizing radiation. Bonus is bonus eligible, click this link for details . Essential Functions All team members are expected to be knowledgeable and compliant with Prisma Health's values: Inspire health. Serve with compassion. Be the difference. Demonstrates competency to assist in performing ERCP's, video fluoroscopies, all OR procedures, Lumbar punctures, bronchoscopies, enterocolitis, sialo grams, rhizotomy, facet blocks, endoscopy-tube placements or injections, t-tube cholangiogram, major trauma/trauma bay, neo-natal ICU, pacing lab. Performs all critical care procedures. Demonstrates competency in the following procedures (arthrograms, myelograms, venograms, minor trauma and troubleshoot complex studies. Demonstrates knowledge and skill to troubleshoot equipment problems. Demonstrates the ability to obtain nursing assessment while nursing is unavailable. Access patient's condition and level of cooperation and makes appropriate judgment of proper care. Notifies nurse and documents all infiltrates and reactions. Quality check images before sending to radiologist to include markers, all pertinent information needed for appropriate dictation. Documents additional information in PACS or EPIC as needed before marking ready to read. Demonstrates the ability to restart, program and release air from patient IVAC's Responds to codes and other emergency situations appropriately. Stays abreast of organizational, affiliate and departmental changes/updates by checking email on each shift. - Performs other duties as assigned. Promotes patient care and safety within the department of responsibility. Is responsible for the smooth workflow of patient flow and proper care and use of equipment and materials. Works within department to ensure good employee, physician and supervisor relationships. Solves personnel problems with related areas. Works with staff technologist in areas of need due to shortages, FMLA, PTO and sick time. Informs patients and families of all delays, (including going to ER room when procedure is delayed more than 30 minutes). Quality check images before sending to radiologist to include markers, all pertinent information needed for appropriate dictation. Writes additional information in PACS or EPIC as needed. Arrives patient and charges procedure and supplies when exam is completed, end exam. Indicates no-film badge wearing name and fluoro time. Adds surgical charges when needed. Operates the PAC's system appropriately and verify studies before sending to archive. Achieve Patient Satisfaction for Prisma Health. Results will be entered on the annual evaluation from the Patient Satisfaction scorecard located on the C2E website under the Experience Pillar. Adheres to the Behavior Essentials set by Prisma Health's patient experience teams. Performs other duties as assigned. Supervisory/Management Responsibilities This is a non-management job that will report to a supervisor, manager, director or executive. Minimum Requirements Education - Certification Program Completion of accredited Radiology program Experience - No Experience Required In Lieu Of Team members in this job as of 11/08/2020 are grandfathered from the minimum requirements listed above pending state and regulatory requirements. Required Certifications, Registrations, Licenses ARRT Registered SCSQRSA License CPR certified Knowledge, Skills and Abilities Customer service skills Teamwork skills Knowledge of office equipment (fax/copier) Proficient computer skills (word processing) Data entry PACS EMR Work Shift Variable (United States of America) Location Greenville Memorial Med Campus Facility 1008 Greenville Memorial Hospital Department 10087120 Radiology Share your talent with us! Our vision is simple: to transform healthcare for the benefits of the communities we serve. The transformation of healthcare requires talented individuals in every role here at Prisma Health.

Apply for this opportunity as a IHC Histology Technician with a top facility in the Mauldin, South Carolina area for permanent hire! Shift: Day Shift Highlights: Full benefits, relocation assistance, career growth opportunities Requirements: HT/HTL (ASCP) or eligibility to obtain; experience in histology required unless a new graduate in the last year Job Details: The Histology Technician is responsible for preparing and processing tissue samples for microscopic examination. This role involves performing various laboratory techniques, ensuring the accuracy of results, and maintaining laboratory equipment. The technician supports pathologists and other medical professionals in diagnosing diseases and conducting research. Key Responsibilities: Sample Processing: Perform tissue processing, embedding, sectioning, and staining according to established protocols. Handle and prepare specimens for microscopic examination, including fixation and embedding in paraffin. Microscopy: Operate and maintain microscopes and other laboratory equipment used in the preparation and examination of tissue samples. Prepare and review slides, ensuring proper staining and quality for diagnostic evaluation. Quality Control: Adhere to quality control procedures to ensure the accuracy and reliability of laboratory results. Identify and troubleshoot any issues with specimen processing or staining techniques. Equipment Maintenance: Clean, calibrate, and maintain laboratory equipment, including microtomes, slide stainers, and embedding centers. Report any equipment malfunctions or maintenance needs to the supervisor. To be considered for this opportunity, click to apply or send a resume to (Job Code: MK8918)

Benefits: Competitive salary Opportunity for advancement Training & development We Offer: Team-oriented culture Community Impact Training programs Competitive compensation Job Summary:The Lightspeed Restoration Field Technician provides 24/7 emergency water damage recovery, mold remediation, fire restoration, and indoor air quality services in homes and buildings. Field Technicians work directly under the supervision of a Lead Technician, Crew Supervisor, or Project Manager in a team atmosphere. The Supervisor will assign various tasks to the field technician to complete as part of the project as a whole. Typical Duties Include: Light demolition and removal of finished building materials from the job site Operating water collection vacuums or pumps to extract standing water from inside structures Detailed, fine cleaning including vacuuming, brushing, and damp wiping surfaces and building contents Setting or adjusting equipment for drying or filtration Cleaning HVAC / air duct & exhaust systems using collection vacuums, rotary and stationary Squatting, crawling, and ladder work are often required to access all areas of a home or building Demonstrate proper, safe operation of battery-operated and corded power drills, hammer drills, circular saws, reciprocating saws Demonstrate safe lifting, pushing, pulling, and ladder-climbing practices Demonstrate safe chemical storage, labeling, and use practices Strong communication skills Excellent customer service skills Ability to operate PC and mobile devices Exhibit a professional, neat appearance Ability to lift 75 lbs Valid driver's license with satisfactory driving record Safety Gear Provided: PPE Gloves (leather, nitrile, or coated cloth depending on application) Safety Glasses or Goggles N-95 Respirators Poly Spun “Tyvek” style suits with hood and foot protection Shoe Covers, Knee Pads, and Muck Boots Hard Hats, Ear Protection, and steel-toe shoes may be required, depending on site application Fall protection for aerial work Qualifications: No experience is required, but 1-2 years of relevant experience is preferred. Working knowledge of residential and/or commercial construction practices is a strong plus Self-motivated and growth-oriented Able to work efficiently and effectively in a team environment Compensation: $16.00 - $24.00 per hour Lightspeed Restoration franchises come to the aid of residential and commercial customers who have been impacted by water and fire damage and indoor air quality issues. Our technicians tackle water, fire, mold, and storm damage. No two jobs are alike so you'll get to take on new challenges every day. Lightspeed provides paid training to bring technicians up to speed on industry best practices and the latest technologies. Technicians who demonstrate expertise and leadership skills can move into supervisor, estimator, and project manager roles. If you're searching for a career that allows you to help people in their greatest time of need, makes a real difference in your community, and provides stability - consider joining the Lightspeed Restoration team. Our technicians are at the heart of everything we do. We're looking for people who find purpose in restoring homes and hope after disasters. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Lightspeed Restoration Corporate.

Georgia Air and Refrigeration Services The Commercial HVAC/Refrigeration Service Technician will be responsible for installing, repairing, and maintaining refrigeration systems, including commercial refrigeration units, residential refrigerators, and HVAC systems. The ideal candidate will have strong technical skills, a commitment to safety, and a customer-focused attitude. About Us: G. A. R. S., Inc. is an excellence-oriented company that proudly serves Georgia, the Carolinas, and Florida with over 30 years of combined experience. Our family owned and operated business provides exceptional quality in commercial/industrial HVAC, refrigeration, kitchen equipment repairs, installation, and maintenance. Benefits: Competitive salary and performance-based bonuses Salary range $28.00 to $35.00 per hour Health, dental, and vision insurance Retirement plan with company match Paid time off and holidays Company vehicle and tools provided Ongoing training and professional development opportunities Key Responsibilities: Install, troubleshoot, repair, and maintain commercial and residential refrigeration systems. Conduct regular maintenance and service checks on refrigeration units to ensure optimal performance. Diagnose and resolve mechanical and electrical issues in refrigeration systems. Perform system adjustments, calibrations, and modifications as needed. Use diagnostic tools and equipment to identify and repair faults. Follow safety procedures and guidelines to ensure a safe working environment. Provide excellent customer service by communicating effectively with clients and addressing their concerns. Maintain accurate records of services performed, including time and materials used. Stay updated on industry advancements and best practices through continuous education and training. Collaborate with team members and other departments to ensure efficient workflow and customer satisfaction. Qualifications: High school diploma or equivalent; technical certification or associate degree in refrigeration, HVAC, or a related field is preferred Proven experience as a HVAC/Refrigeration Service Technician or in a similar role. Strong knowledge of refrigeration systems, including compressors, condensers, evaporators, and refrigerants. Proficient in reading and interpreting technical diagrams, schematics, and manuals. Excellent problem-solving and troubleshooting skills. Ability to use hand and power tools safely and effectively. Strong communication and customer service skills. Ability to work independently and as part of a team Valid driver's license with a clean driving record as outlined with our company policy. Must be able to pass a satisfactory background screening. . EPA 608 certification (preferred). Physical Requirements: Ability to lift and carry up to 50 to 75 pounds; frequently lift and or move up to 100 pounds with assistance and heavy lift equipment. Comfortable working in various environments, including confined spaces and heights. Ability to stand, walk, and bend for extended periods and climbing up and down of ladders. Extensive daily travel to work site locations. Exposure to electrical, steam, and high heat units that require extreme caution and safety equipment. Join our team and be part of a dynamic company dedicated to providing top-notch service to the Commercial Foodservice Repair Industry. We look forward to meeting you! GARS is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

At ProMach, we're looking for people who want to shine. You'll have opportunities to take your career in the direction you desire. You can be creative. Strategic. Persuasive. Influential. Meticulous. A technical enthusiast. A closer. A futurist. As a Field Service Technician, you'll be challenged and rewarded. Impact our customers' packaging performance and efficiency every day. Help build the future of packaging automation. We're proud of that and know you will be too. Do we have your attention? Keep reading. Rugged, cost competitive, and easy-to-use, Matrix packaging systems include vertical form fill seal equipment for all types of flexible packaging, as well as INVPack stickpack and sachet machines and Pacraft pre-made pouch machines. As part of the ProMach Flexibles business line, Matrix helps our packaging customers protect and grow the reputation and trust of their consumers. ProMach is a family of best-in-class packaging solution brands serving manufacturers of all sizes and geographies in the food, beverage, pharmaceutical, personal care, and household and industrial goods industries. ProMach brands operate across the entire packaging spectrum: filling and capping, flexibles, pharma, product handling, labeling and coding, and end of line. ProMach is headquartered near Cincinnati, Ohio, with manufacturing facilities and offices throughout North America, Europe, South America, and Asia. For more information about ProMach, visit *************************** and for more information on ProMach Careers, visit ****************************** As Field Service Technician, you'll support the installation, maintenance, and repair of automated packaging equipment. You'll solve mechanical and electrical challenges for customers with your strong troubleshooting and customer service skills. Does this work interest you? * Installation, integration, repair and troubleshoot flexible machinery of a complex design requiring a high level of technical skill/knowledge and independent problem-solving skills. * Ensure all established inspection, testing, quality and operating specifications are met. * Directs and or oversees customer's personnel during plant machinery installations and integrations or servicing (repair and/or troubleshooting). * May provide on-site customizing of machine programs by revising programs to meet the customer needs. * Occasionally maintain a 24-hour on-call status and provide customer technical telephone support. * Will provide factory floor support when not providing customer field service support/travel. * Provide customer training regarding the operation & service of our machinery. * Assist customers with aftermarket parts needs will in the field. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! Please note that the pay ranges listed on external job boards, outside of our posting details, do not accurately reflect our internal compensations ranges. If this sounds like you, we want to connect! * Successful candidate must possess knowledge/skills of mechanical principles and be willing to travel extensively within the US and, from time to time, internationally. * Good communication & interpersonal skills and a strong customer service focus. * Familiarity with PLC/PC systems helpful. * Proficiency in Windows & MS software (Word, Excel, Outlook). * Excellent customer service skills; ability to train customer personnel on equipment. * Prefer experience in flexible packaging material machinery. * Minimum of 1 year experience in machinery repair. * PLC programming experience preferred. * Technical Associate degree or equivalent combination of education and experience. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. #MATRIX #INMAT

Fiber OSP Field Technician Title: Field Technician FLSA Status: Non- Exempt Shift: N/A Reports to: Construction Superintendent Department: TEP Fiber Employment Status: Full-time Supervisory Responsibilities: No Location: Greenville, SC Date Created/Last Evaluated: 3/8/2019 Summary Position requires incumbent to work as part of small team environment helping and training others to construct and maintain fiber routes. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Must have High school diploma or equivalent 0-2 years of experience with ability to take direction and learn from experience Must have a valid driver's license and a clean driving record to operate a company vehicle Knowledge, Skills and Abilities Ability to work independently as well as in a team Ability to analyze and solve problems Ability to use and take care of hand tools and mechanical equipment Ability and interest in performing work in the field Demonstrated willingness to learn Physical ability to lift 75+lbs. and be comfortable working in an outdoor environment in all types of weather Ability to maintain an effective working relationship with other employees and the general public Ability to travel for extended periods of time (travel required is 50% to include overnight). Ability to be covered by company auto insurance plan Supervisory Responsibilities This position has no supervisory responsibilities. Essential Functions Dig holes, work with hand tools, restore landscaping Lay fiber innerduct and pull fiber through existing ducts Operate heavy equipment and excavation truck Operate pipe and cable locators and mark underground utilities Measure and record installed quantities of fiber Assist on overall job including all tasks required to build and install a site per customer specifications Maintain clean, orderly environment adhering to company policies and industry regulation/standard(s) (OSHA) Physical Demands While performing the duties of this job, the employee is regularly required to be at site locations both on the ground and on building roof tops, sit, stand, walk, use both hands, and reach and raise items above the head, use fingers to feel and handle, talk and hear. While performing the duties of this job, the employee frequently is required to stoop, kneel and crouch, lift weight or exert a force of 75+ or more pounds. Work Environment Most work is performed externally, on-site, outdoors, with exposure to the elements of nature working under normal construction conditions. 95% of travel is required in support of this position. Approximately 5% performed in climate-controlled internal office environment working under normal office conditions. Night and weekend work may be required up to 25% of the time. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.

At McKim & Creed, we are an employee-owned firm with more than 800 employees in offices throughout the U.S. including NC, SC, FL, VA, GA, TX, LA and PA with a culture centered around "People Helping People" grounded by our core values (1) respect for people, (2) customer satisfaction, (3) continuous improvement, (4) safety and (5) ownership, which drives our mission to deliver exceptional engineering and geomatics solutions. We are a leading top 150 ENR-ranked firm seeking highly motivated Survey Field Technician II (Instrument Person) inspired to elevated and grow your career to the next level. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: * Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned. * Competitive pay + paid holidays, bereavement, and parental, medical, and military leave * Multiple office locations to work from: Stick close to home or travel for a change of scenery. * Growth opportunities & training: Grow confidently in your career with our mentoring & training options. * Professional development: Tuition reimbursement, early career professional program, online courses & more * Work that makes a difference: See the direct impact your work has on our communities. * Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way. We have an exciting opportunity to join our team. If you want to work at a company that will help improve the future of the communities where we live work and play, we're glad you found McKim & Creed. Join Our Team of Geospatial Experts Video YOUR DAY-DAY WILL INCLUDE: * Responsible for assisting the Crew Chief in the operation of a field survey crew. * Major objectives are the quality (accuracy, thoroughness, meeting regulatory requirements, public relations) of work, safety, and maintenance of equipment. * Must operate equipment, maintain safe work environment, protect, and maintain the equipment and vehicles, accurately and efficiently collect field data and locate features. * Some overnight travel may be required. * Requires a lot of walking outside year-round through all kinds of terrain and in extreme heat and cold. WHAT YOU NEED: * High school diploma or GED required. * Good technical skills: process oriented behavioral traits including being steady, helpful, analytical, a problem solver, likes work alone when required, methodical, consistent, detail oriented, precise, hates mistakes, likes structure. * EFB data collection experience preferred. * Must have a valid driver's license, an acceptable motor vehicle record, cleared background check and negative drug test result. WHAT WILL MAKE YOU STAND OUT: * One (1) to two (2) years of progressive experience in land survey field operations and proficiency with land survey equipment (total stations) and GPS is required. * Self-motivated with an entrepreneurial spirit. * Excellent problem-solving skills. * Motivated to learn and develop your career path. * Aligned to McKim & Creed's Core Values. * Sound functional/technical skills in the role. McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

At McKim & Creed, we are an employee-owned firm with more than 800 employees in offices throughout the U.S. including NC, SC, FL, VA, GA, TX, LA and PA with a culture centered around “People Helping People” grounded by our core values (1) respect for people, (2) customer satisfaction, (3) continuous improvement, (4) safety and (5) ownership, which drives our mission to deliver exceptional engineering and geomatics solutions. We are a leading top 150 ENR-ranked firm seeking highly motivated Survey Field Technician II (Instrument Person) inspired to elevated and grow your career to the next level. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned. Competitive pay + paid holidays, bereavement, and parental, medical, and military leave Multiple office locations to work from: Stick close to home or travel for a change of scenery. Growth opportunities & training: Grow confidently in your career with our mentoring & training options. Professional development: Tuition reimbursement, early career professional program, online courses & more Work that makes a difference: See the direct impact your work has on our communities. Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way. We have an exciting opportunity to join our team. If you want to work at a company that will help improve the future of the communities where we live work and play, we're glad you found McKim & Creed. Join Our Team of Geospatial Experts Video YOUR DAY-DAY WILL INCLUDE: Responsible for assisting the Crew Chief in the operation of a field survey crew. Major objectives are the quality (accuracy, thoroughness, meeting regulatory requirements, public relations) of work, safety, and maintenance of equipment. Must operate equipment, maintain safe work environment, protect, and maintain the equipment and vehicles, accurately and efficiently collect field data and locate features. Some overnight travel may be required. Requires a lot of walking outside year-round through all kinds of terrain and in extreme heat and cold. WHAT YOU NEED: High school diploma or GED required. Good technical skills: process oriented behavioral traits including being steady, helpful, analytical, a problem solver, likes work alone when required, methodical, consistent, detail oriented, precise, hates mistakes, likes structure. EFB data collection experience preferred. Must have a valid driver's license, an acceptable motor vehicle record, cleared background check and negative drug test result. WHAT WILL MAKE YOU STAND OUT: One (1) to two (2) years of progressive experience in land survey field operations and proficiency with land survey equipment (total stations) and GPS is required. Self-motivated with an entrepreneurial spirit. Excellent problem-solving skills. Motivated to learn and develop your career path. Aligned to McKim & Creed's Core Values. Sound functional/technical skills in the role. McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

Job Details Greenville, SC $40,000.00 - $50,000.00 SalaryDescription Commute daily to our customers' job sites to take accurate measurements of all areas of the new construction home that have cabinets and countertops in them. Collect any unused or extra cabinet parts and trim and return them to stock in our warehouse. Have a working knowledge of residential blueprints. Complete a Quality Inspection report for our customers after cabinets have been installed. Must be able to communicate effectively with all our customers/builders and our internal departments to successfully run your territory. Vehicles and tools are provided by the company. Qualifications Must have a valid driver's license and clean driving record MUST be clean. Must be available to work Monday through Friday. Must be willing to learn how to make small repairs to cabinets. Must have good written and verbal communication. Must be able to stoop, lift, bend, and climb around job sites to get the job done. Must be able to read a tape measure and add and subtract measurements.

Field Service Technician (Energy) is responsible for the diagnosis, repair, reconditioning, overhaul and maintenance of customer and company engines and power generation equipment and components. Blanchard Machinery Company is committed to fostering a high-performance work culture with challenging work opportunities that inspire high quality results. Some of the benefits of joining our team are: Competitive Pay. Benefits: Medical, dental, vision, 401K, profit sharing, generous PTO and paid holidays, uniforms, and much more. Exposure to world-class CAT training and development. A friendly and supportive work environment. Continuous exposure to learning and new technologies. Opportunities for advancement. Responsibilities Installation, maintenance and troubleshooting of engine and electrical related system transfer switches, and switchgear. Removes, disassembles, assembles, and installs components and parts. Interpret technical drawings, schematics and wiring diagrams. Diagnose the problem and cause of failure through logical troubleshooting steps. Determines reusability of parts in accordance with published Caterpillar reusability guidelines. Orders replacement parts ensuring that parts ordered are correct and complete at time of order. Cleans, repairs, reconditions, and maintains equipment and components. Tests, measures, and adjusts engine and machine systems and components. Prepares, inspects and operates machines prior to delivery. Keeps up to date with developments in tooling, technologies and systems. Prepares inspection and appraisal reports. Prepares accurate and complete service reports timely. Maintain a professional and proper personal appearance. Flexible to work after hours when needed to meet customer needs. Preparing parts requisitions, time cards, part returns, accurate and complete service reports and other necessary reports and forms. Maintaining the service truck and equipment carried on the service truck. Qualifications High school diploma or GED equivalent. Preference given to candidates with five years electrical power generation/electronics experience with a minimum of three years' experience on CAT diesel and natural gas engines and/or like competitive equipment including up to 480 volts. Preference given to candidates familiar with CAT diagnostics software (SIS) or current comparable systems. Valid driver's license and a safe driving record. Strong problem solving skills and be detailed oriented with a high level of accuracy. Ability to deal with problems involving a few concrete variables in standardized situations. Ability to perform duties with a sense of urgency, exceeding customer expectations. Ability to work in the field without supervision. Must be able to work in a dynamic, fast paced service environment. Maintain a tool inventory sufficient to perform assigned tasks. Working Conditions The physical environment requires the employee to work primarily outside in heat/cold, wet/humid, and dry/arid conditions. Required to use personal protective equipment to prevent exposure to injury and/or hazardous materials. Job requires standing, stooping, squatting, pushing, pulling, twisting, turning, lifting. Physical use of a broad variety of tools and machines in order to maintain, troubleshoot and repair equipment. Must be able to use the hands to grasp hand tools and parts. The employee must be able to endure prolonged forward and overhead arm positions while performing mechanical operations. The employee must be able to lift varied weight. Seeing, reading, and writing to complete job responsibilities. Use of computer and other forms of technology to complete job responsibilities.

Summary: Galileo TP is a quickly growing company in a unique and exciting field, working with manufacturers in the refrigeration industry. We are looking for a dynamic, self-motivated Field Technician willing to see jobs through to completion. This individual must be able to quickly understand each customer's process and requirements, and must be able to effectively and professionally diagnose, repair, and communicate technical information to personnel at various levels, including upper-management, engineers, operators and contractors. This is a truly unique opportunity for the right individual, offering in-depth, hands-on training, competitive pay (based on experience), and benefits including paid time off, medical package, and more. Job Responsibilities: Perform service on Galileo equipment on-site with customers and/or provide support and troubleshoot issues over the phone or through email in an efficient manner. Complete installations of manufacturing equipment at customer locations across North America. Provide written reports of all onsite visits for service and/or installations. Work with the commercial and engineering departments to assure customer's technical needs are understood and achieved. Create service and parts quotes as requested by customer. Open to pre-office hour calls from our headquarters in Florence, Italy to communicate information and receive product support. Must be willing and able to travel throughout North American market Willing to travel outside of normal office hours. Occasionally must travel by company car from office to customer locations. Qualifications: Basic computer skills (MS Outlook, Word, Excel) High School Diploma and/or Associate Degree Must have basic training in working safely with electricity. Basic HVAC/R knowledge Able to communicate clearly and professionally through emails and phone calls. Must be detail-oriented and possess proficient skill working with tools. Must be prepared to pass background, drug, driving and credit screening. Useful but not required skillsets: Bilingual-Spanish or Italian IT experience (setting up simple networks) Basic programming or PLC troubleshooting Experience with managing/working with contractors. Basic electrical skills (wiring panels, pulling wire, running conduit) Mechanical aptitude (rebuilding compressors, vacuum pumps and gas transfer pumps)

Join Our Team as a Field Service Technician at DOC Services Inc.! Are you a skilled technician looking to advance your career with a leading company that values your hard work and expertise? DOC Services Inc. is the perfect place for you! With over 35 years of experience and a reputation for excellence, we are committed to providing reliable maintenance solutions that keep our clients' businesses running smoothly. Why DOC Services Inc.? Year-Round Stability: Enjoy consistent work. Growth and Development: Continuous training and opportunities to enhance your skills and advance your career. Comprehensive Support: Be part of a company that sets you up for success, with robust resources and a dedicated support system. Flexible Scheduling: Achieve work-life balance with schedules designed to fit your lifestyle. Top-Notch Benefits: Competitive compensation, 401(k) with company match, medical, dental, and vision insurance, life insurance, and disability coverage. Your Role as a Field Service Technician You'll be at the forefront of ensuring equipment runs efficiently in big-box retail environments. Your main responsibilities include: Diagnosing and repairing mechanical and electrical failures on electromechanical equipment. Performing preventive maintenance while adhering to OSHA safety standards. Skillfully using hand and power tools for equipment assembly, disassembly, and repair. Promptly responding to service calls to keep our clients' equipment operating seamlessly. Communicating effectively with customers and colleagues, embodying our commitment to top-tier service. Minimum Qualifications: A high school diploma or GED. 2+ years of equipment repair experience or equivalent training. Strong mechanical and electrical skills, with the ability to read schematics. A valid driver's license with a clean driving record. Excellent interpersonal skills and a professional attitude. The ability to work independently, pay close attention to detail, and remain organized. Physical capability to stand, bend, drive for extended periods, lift up to 50 lbs, and work at heights over 6 feet. What We Offer: Tools of the Trade: Company vehicle, phone, laptop, and gas card provided. Financial Security: Competitive pay and a 401(k) plan with company match. Health and Wellness: Comprehensive medical, dental, and vision insurance options. Career Advancement: Continuous training and professional development opportunities. Company Culture: Be part of a respected, nationwide service company that celebrates its heritage and looks forward to the future. Join us and bring your expertise to a team that values quality, dedication, and professionalism. Apply today and become part of a company where your skills will be recognized and rewarded. DOC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, disability, or any other federal, state, or local protected class. Salary Description $20.00 - $24.00 per hour

SUMMIT is a multi-disciplinary engineering and consulting services group offering Environmental and Geotechnical Engineering, Subsurface Drilling, Construction Materials Testing, Chapter 17 Special Inspections, Advanced AASHTO, ACI, AMRL, CCRL and NCDOT Laboratory Testing, Residential and Retaining Wall Design, and Structural and Forensic Inspections through our family of companies. With our corporate headquarters in Charlotte, North Carolina , branch office in Raleigh, North Carolina , Charleston, Greenville and Columbia , South Carolina , our wide range of professional service capabilities and our dedication to our clients and their projects we have become one of the regions most sought after consulting firms. Serving both the Public and Private sectors, our services are utilized on an extensive variety of projects with focus on the Residential, Commercial, Transportation, Multi-Family, Healthcare and Government industries. Job Description A multi-dsiciplined engineering firm is seeking an Engineering Field Technician to add to their Greenville, South Carolina branch location. This will be a full-time position responsible for various Construction Materials Testing, Special Inspections and/or Foundations tasks. Addition job responsibilities may include Performs routine field and/or laboratory tests Responsible for the field compaction testing, sampling and observation of soils, stone and asphalt, utilizing nuclear density gauges or drive tube methods. Performs concrete, grout, and masonry quality control tests through sampling and visual observation, performing slump tests and collecting compressive and flexural strength. Sampling of asphalt cores to verify thickness Perform hand augers with dynamic cone penetrometer (DCP) testing to collect data of subsurface conditions for foundations, roadways and other surfaces Daily communication with site contractors, other technicians and project managers Complete accurate and detailed field testing reports and/or diagrams It is preferred that candidates are familiar with performing field activities such as field density testing (Shelby tube and sand cone), material quantifications and concrete sampling and testing. Applicants must have excellent written and verbal communication skills and a strong work ethic. Work schedule may include some weekends. Qualifications Ideal applicants will have 0-2 years of Construction Materials and/or Inspection experience combined with a Civil Engineering degree. Familiarity with ACI, ICC, NICET, NCDOT and/or SCDOT, Nuclear Gauge Certification a plus. Engineer in Training will be required for advancement opportunities into Project Management. Additional Information The SUMMIT Companies offers a competitive compensation and benefits package including medical, dental & vision insurance, 401(k) plan, paid time off (PTO) and paid holidays. The SUMMIT Companies is an Equal Opportunity Employer. In field related positions, additional equipment may be provided.

SUMMIT is a multi-disciplinary engineering and consulting services group offering Environmental and Geotechnical Engineering, Subsurface Drilling, Construction Materials Testing, Chapter 17 Special Inspections, Advanced AASHTO, ACI, AMRL, CCRL and NCDOT Laboratory Testing, Residential and Retaining Wall Design, and Structural and Forensic Inspections through our family of companies. With our corporate headquarters in Charlotte, North Carolina, branch office in Raleigh, North Carolina, Charleston, Greenville and Columbia, South Carolina, our wide range of professional service capabilities and our dedication to our clients and their projects we have become one of the regions most sought after consulting firms. Serving both the Public and Private sectors, our services are utilized on an extensive variety of projects with focus on the Residential, Commercial, Transportation, Multi-Family, Healthcare and Government industries. Job Description A multi-dsiciplined engineering firm is seeking an Engineering Field Technician to add to their Greenville, South Carolina branch location. This will be a full-time position responsible for various Construction Materials Testing, Special Inspections and/or Foundations tasks. Addition job responsibilities may include Performs routine field and/or laboratory tests Responsible for the field compaction testing, sampling and observation of soils, stone and asphalt, utilizing nuclear density gauges or drive tube methods. Performs concrete, grout, and masonry quality control tests through sampling and visual observation, performing slump tests and collecting compressive and flexural strength. Sampling of asphalt cores to verify thickness Perform hand augers with dynamic cone penetrometer (DCP) testing to collect data of subsurface conditions for foundations, roadways and other surfaces Daily communication with site contractors, other technicians and project managers Complete accurate and detailed field testing reports and/or diagrams It is preferred that candidates are familiar with performing field activities such as field density testing (Shelby tube and sand cone), material quantifications and concrete sampling and testing. Applicants must have excellent written and verbal communication skills and a strong work ethic. Work schedule may include some weekends. Qualifications Ideal applicants will have 0-2 years of Construction Materials and/or Inspection experience combined with a Civil Engineering degree. Familiarity with ACI, ICC, NICET, NCDOT and/or SCDOT, Nuclear Gauge Certification a plus. Engineer in Training will be required for advancement opportunities into Project Management. Additional Information The SUMMIT Companies offers a competitive compensation and benefits package including medical, dental & vision insurance, 401(k) plan, paid time off (PTO) and paid holidays. The SUMMIT Companies is an Equal Opportunity Employer. In field related positions, additional equipment may be provided.

NOVA Engineering is seeking Field Engineering Technicians - Construction Materials Testing Technicians based from our Greenville, SC office. Responsibilities: * Field testing of soil, concrete, asphalt, aggregate, and masonry mortar/grout for compliance with ASTM, AASHTO, DOT, and/or project specifications * Review of blueprints in preparation of field observations on construction sites * Documentation of field activities, observations, and testing results on construction projects, and their conformance with (or deviation from) project plans and specifications * Daily use of Metafield, and/or other field and laboratory information management systems, for recording of testing results * Communication of field and laboratory testing results with Construction Services and Geotechnical Project Management staff, general contractors, and clients * Calibration of field and laboratory equipment to industry codes and standards Qualifications: * 2+ Experience in construction testing/inspections of soil, concrete, masonry, and/or asphalt materials preferred * ACI Certification is required * ICC certifications are a huge plus * Ability to routinely lift 40 to 50 lbs. (field/laboratory samples and equipment), required * Ability to work and maneuver equipment (such as a loaded wheelbarrow) on uneven ground and around active construction sites * Willingness to travel out-of-town (typically overnight) for short duration assignments Check out our Perks: In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits: * Use of take-home Company Vehicle and gas card for daily travel to work sites * Comprehensive group medical insurance, including health, dental and vision * Opportunity for professional growth and advancement * Certification reimbursement * Paid time off * Company-observed paid holidays * Company paid life insurance for employee, spouse and children * Company paid short term disability coverage * Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection * 401K retirement with company matching of 50% on the first 6% of employee contributions * Wellness program with incentives * Employee Assistance Program NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

For nearly 70 years, MasterBrand has been shaping the places where people come together, enriching lives and creating meaningful memories for our customers. That, combined with our stylish products, expansive dealer and retail network, and dedicated associates, has helped make us the number one North American residential cabinet business. Our unique culture of continuous improvement is based on trusting the tools , empowering the team and moving forward , and is kept alive by our more than 14,000 associates across 20-plus manufacturing facilities and offices. Visit ******************* to learn more and join us in building great experiences together ! Job Description Masterbrand Cabinets, the largest cabinet manufacturer in North America, is seeking a Service Technician (1099 Subcontractor). We've built our reputation as one of the best cabinet makers around by committing ourselves to the 4 service basics: safe and clean workplace, quality construction, fashionably products, and complete, on-time delivery. Position Summary Install and service/repair cabinetry which includes cabinets, moldings, trim, hardware, etc. Weekly pay with direct deposit Accountabilities Follow established safety/OSHA rules to maintain a safe and clean workplace Ability to understand and install cabinetry per layout Reliable transportation Must maintain required insurances/licenses (general and auto liability coverage to $1 million required) Workman's compensation Background check required Work with deadlines to complete the scheduled task Must have all tools to complete the job as required (cordless tools a plus) Ability to work with and around other trades while completing work Must have an active email account Must have a cell phone Qualifications Attention to detail Communicate effectively Self-motivated Ability to work in a fast-paced environment while maintaining expectations Ability to problem solve Ability to follow installation guidelines Education & Experience 1 year or more installing cabinetry / service work Experience in finishing and touching up cabinetry preferred Experience working with Homebuilders preferred Additional Information Equal Employment Opportunity MasterBrand Cabinets LLC is an equal-opportunity employer. MasterBrand Cabinets LLC's policy is not to discriminate against any applicant or employee based on race, color, religion, sex, gender identity or expression, national origin, ancestry, age, disability/handicap status, marital status, military status, sexual orientation, genetic history or information, or any other basis protected by applicable federal, state or local laws. MasterBrand Cabinets LLC also prohibits harassment of applicants or employees based on any of these protected categories. It is also MasterBrand Cabinets LLC's policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Reasonable Accommodations MasterBrand Cabinets LLC is committed to working with and providing reasonable accommodations to individuals with disabilities. If you have a disability and wish to discuss potential accommodations related to applying for employment, please contact us at [email protected].

CAREER in BEER? WE WANT TO SPEAK TO YOU! * Nights and weekends off? Check! * Learning from the very best in the beer industry? Check! * Visiting great bars and breweries each day? Check! * Great launching point to grow within the beer industry? Check! The AHFP company motto is "TRUST us for the Perfect Pint." Our mission is to provide great-tasting draft beer to the consumer, the way the brewmaster intended and to grow draft beer sales. Job Summary: As a Draft Beer Quality Technician (DQT), you are responsible for ensuring local bars/restaurants serve the highest quality pints of draft beer. A typical day will be visiting customer locations to keep their draft beer systems clean and serving great beer as well as building relationships with managers, owners, and bartenders. No previous experience is required as we provide training on draft beer system operations, maintenance, and troubleshooting. Qualifications: * High School Diploma or GED * At least 18 years of age * Valid drivers license * Able to lift 50+ lbs * Hands-on/quick learner Benefits: * A benefits package valued at more than $10k*. This includes a 401(k) plan with company matching, medical coverage plans customized to suit your needs, and a commitment to work/life balance through our paid time off (PTO) programs, paid company holidays. * Enrollment into our "Stop the Slip" safety program where you receive non-slip shoes. * Eligibility for health, dental, and vision coverage subject to a 60-day waiting period. * AHFP pays a portion of the employee's monthly medical insurance premium to offset the cost of their plan. * Free telemedicine through First Stop Health is provided to employees and their immediate family members who enroll in health benefits. * AHFP-owned cell phone with minutes and data paid. * Bi-annual performance reviews with pay increases. Salary: * $18.00/hr + growth opportunities and overtime hours Hours: * Full-time position with work scheduled Monday-Friday from 7:00 am-4:30 pm. (no nights, early mornings, or weekends but regular overtime opportunities are available) Transportation: * Company vehicle with gas, maintenance, and insurance.

INFINITI of Greenville is looking for entry-level lube technicians to join our team. If you want to grow your career and want to work in a clean and safe environment, come and see what we have to offer. We provide an excellent working environment and temperature-controlled environment. We offer you the opportunity to grow your career and become a certified technician. Come be part of a team! WE OFFER: Health, Dental, Medical 401K Paid Time Off RESPONSIBILITIES: Minor vehicle services Perform multi-point inspections Use power tools, machine tools, and common hand tools to perform various tasks REQUIREMENTS: No previous experience necessary Good knowledge of automobiles Good analytical and communication skills Good reading, computer, and mathematics skills High school diploma or GED Team player Ability to work on your feet for extended periods of time Ability to work in a fast-paced environment Positive, friendly attitude About the Dealership Mills Auto Group understands rapid growth in the automotive space. Family-owned and operated for almost 2 decades, we are proud to have grown from 1 store to 30+. Most of our team of dedicated and motivated leaders have been with us since the beginning, most starting in entry-level roles themselves. We understand the importance of employee growth and promote from within often. In addition to career development, at Mills Auto Group, you are recognized for your accomplishments. We have quarterly and yearly employee appreciation events. We participate in Degrees at Work and fund our employees’ college education! We encourage you to get involved with our community outside of the office as well – whether you choose to participate in the Boys and Girls Club, Wounded Warriors, or Support Future Leaders, there is always an opportunity for our employees to help our community.

Inspire health. Serve with compassion. Be the difference. Performs a variety of radiographic procedures applying ionizing radiation. Essential Functions All team members are expected to be knowledgeable and compliant with Prisma Health's values: Inspire health. Serve with compassion. Be the difference. Demonstrates competency to assist in performing ERCP's, video fluoroscopies, all OR procedures, Lumbar punctures, bronchoscopies, enterocolitis, sialo grams, rhizotomy, facet blocks, endoscopy-tube placements or injections, t-tube cholangiogram, major trauma/trauma bay, neo-natal ICU, pacing lab. Performs all critical care procedures. Demonstrates competency in the following procedures (arthrograms, myelograms, venograms, minor trauma and troubleshoot complex studies. Demonstrates knowledge and skill to troubleshoot equipment problems. Demonstrates the ability to obtain nursing assessment while nursing is unavailable. Access patient's condition and level of cooperation and makes appropriate judgment of proper care. Notifies nurse and documents all infiltrates and reactions. Quality check images before sending to radiologist to include markers, all pertinent information needed for appropriate dictation. Documents additional information in PACS or EPIC as needed before marking ready to read. Demonstrates the ability to restart, program and release air from patient IVAC's Responds to codes and other emergency situations appropriately. Stays abreast of organizational, affiliate and departmental changes/updates by checking email on each shift. - Performs other duties as assigned. Promotes patient care and safety within the department of responsibility. Is responsible for the smooth workflow of patient flow and proper care and use of equipment and materials. Works within department to ensure good employee, physician and supervisor relationships. Solves personnel problems with related areas. Works with staff technologist in areas of need due to shortages, FMLA, PTO and sick time. Informs patients and families of all delays, (including going to ER room when procedure is delayed more than 30 minutes). Quality check images before sending to radiologist to include markers, all pertinent information needed for appropriate dictation. Writes additional information in PACS or EPIC as needed. Arrives patient and charges procedure and supplies when exam is completed, end exam. Indicates no-film badge wearing name and fluoro time. Adds surgical charges when needed. Operates the PAC's system appropriately and verify studies before sending to archive. Achieve Patient Satisfaction for Prisma Health. Results will be entered on the annual evaluation from the Patient Satisfaction scorecard located on the C2E website under the Experience Pillar. Adheres to the Behavior Essentials set by Prisma Health's patient experience teams. Performs other duties as assigned. Supervisory/Management Responsibilities This is a non-management job that will report to a supervisor, manager, director or executive. Minimum Requirements Education - Certification Program Completion of accredited Radiology program Experience - No Experience Required In Lieu Of Team members in this job as of 11/08/2020 are grandfathered from the minimum requirements listed above pending state and regulatory requirements. Required Certifications, Registrations, Licenses ARRT Registered SCSQRSA License CPR certified Knowledge, Skills and Abilities Customer service skills Teamwork skills Knowledge of office equipment (fax/copier) Proficient computer skills (word processing) Data entry PACS EMR Work Shift Day (United States of America) Location Patewood Memorial Hospital Facility 1046 Patewood Hospital Department 10467120 Radiology-PMH Share your talent with us! Our vision is simple: to transform healthcare for the benefits of the communities we serve. The transformation of healthcare requires talented individuals in every role here at Prisma Health.