Field Engineer Jobs in Patton, PA

We are currently hiring a Project Engineer II for our client in the Pittsburgh, PA area. Applies knowledge of engineering principles and practices in diverse areas of assignment. Makes decisions on engineering problems and methods. Represents the department to resolve important questions. Requires the use of advanced techniques and the modification and extension of theories, precepts, and practices of own field and related sciences or disciplines, including practical field experience. Consults supervisor or principal engineer concerning unusual problems and/or developments. Key Accountabilities An Engineer II will perform most of these duties at an intermediate level Applies strong knowledge and background of engineering principles to the midstream industry. Develops, coordinates, and directs critical projects or field engineering assignments that are large and/or complex. Provide analysis, design, specification and cost estimates for jurisdictional and non-jurisdictional natural gas gathering and transmission systems. Develop scope of work, manage bid process and pipeline and facility design/construction. Review and assess new technology, processes, materials and equipment. Frame engineering/operational problems and propose solutions. Monitor and support engineering related activities as related to field construction projects. Monitor system performance and prepare long and short-term facility plans including costs. Must be able to make sound engineering decisions under limited time constraints. Initiates or performs engineering studies, proposing solutions or recommending alternatives. Prepare written procedures to facilitate construction, maintenance, pipeline integrity assessments and operation of gas transmission and gathering systems. Provide technical support to field as needed. Prepare and present technical reports on projects. Contribute to the development of the budget and containment of project costs. Conduct studies and analyses to assist in the resolution of engineering-related issues; may assist with developing engineering standards and practices. Mentors and provides guidance/direction for less experienced personnel. Minimum Education & Experience Requirements A Bachelor's degree in Engineering and three to five years of job related experience is required. Must possess and maintain a valid driver's license, and meet company-driving standards. Other Qualifications Preferred: Gathering and transmission pipeline and facility design and/or pipeline integrity management experience Professional Engineer license and/or Master's Degree Other Requirements: Knowledge of design, installation and commissioning of gas pipeline system including gathering and transmission pipelines, gas/liquid separation, heating and flow/pressure regulation, measurement and odorization Knowledge of planning and execution of pipeline integrity management tasks including ILI and DA, pipeline remediation, threat identification, risk assessment and records management Knowledge of industry codes and standards including applicable Federal, State, and local regulations, laws, and codes, ASME Piping Codes, National Electric Code, CFR 192, DOT, and PHMSA rules and regulations. Strong analytical, planning, organization, time management and problem solving skills Ability to lead cross functional teams Ability to interpret blueprints/drawings/schematics and other design documents Communicate effectively both orally and in writing with people at all levels both within and outside the company. Effective in self-management of time with a demonstrated personal commitment to work Practice the corporate core values of Integrity, Respect, Learning, Safety, Business Success and Customer Service

Acara Solutions is looking for a Product Introduction Engineer for a contract-to-direct position with our client located in Pittsburgh, PA who specializes in transportation manufacturing. Salary range when converted to direct employee: $90,000 to $95,000/year. Equivalent hourly rate as a contractor. Shift: 7am - 4pm or 8am-5pm Monday-Friday Testing & Commissioning of Electrical, Controls, onboard communications & network systems. As a Product Introduction Engineer, you will work to define and deliver Testing and Commissioning procedures, tools, and facilities in accordance with customer acceptance criteria. You will work on performance measurement which includes ensuring our test procedures are safe, monitoring the amount of rework based on test procedures with respect to the allocated budget, and ensuring that the work is completed on time. Some of your responsibilities will include: Developing a clear understanding of the Customer Acceptance Criteria Managing the development and supply of test procedures, facilities, and tools for RS sites and depots Ensuring that test procedures and tools configuration are managed during the project lifecycle Defining and optimizing the Standard Operating Procedures with reference time and monitor deviations Implementing REX (Return of Experience) from Test & Commissioning phase of the project Supporting the T&C Operations team, for the implementation and execution of the Testing Procedures Ensuring T&C procedures comply with EHS Policy and Site EHS Management System Participating in EHS activities on shop floor Required Skills / Qualifications: Minimum 3 years of experience in Testing & Commissioning of Electrical, Controls, onboard communications & network systems within process industry, railways or factory automation Bachelors Degree in Engineering or related field is required Preferred Skills / Qualifications: Good knowledge of IT Tools and smart devices Familiarity with high risk activities in association with Electrical work and EHS requirements Previous work experience in the rail industry and/or specific educational studies in this field is preferred. Have a good technical knowledge of electrical, electronic, mechanical and networks domains Understanding of Lean approach for Industrialization

Warrendale, PA Our client is looking for a Civil Project Engineer who will be responsible for designing site plans. The work will include grading, stormwater, roadway, utility layouts, and erosion control. This role oversees the project managers and drafting technicians, providing mentoring and guidance throughout the project. Responsibilities for the Project Engineer Overviewing the design from inception to completion Working directly with project managers and drafters Extensively working with customers throughout projects Requirements for the Project Engineer Minimum 3 years of Professional Engineering experience PE license in the State of Pennsylvania Stormwater Management Design, HydroCad Software, and E&S Control design experience Experience in AutoCAD/Civil 3D Compensation for the Project Engineer Benefit Package including Medical, Dental, and Vision insurance 401(k) plan PTO with holidays Salary: $100K - $120K

First Quality was founded in 1989 and, in nearly three decades, has grown to be a global privately held company with over 4,000 employees. Its corporate offices are located in Great Neck, New York, with manufacturing facilities and offices in Pennsylvania, South Carolina, Georgia, and Canada. First Quality is a diversified family of companies manufacturing consumer products ranging from Absorbent Hygiene (adult incontinence, feminine care, and baby care), Tissue (bath and towel), and Industrial (print and packaging materials), serving institutional and retail markets throughout the world. First Quality focuses on private label and branded product lines. Our core business philosophy is built on a proud culture driven by safety and quality, respect, humility, integrity, customer focus, and teamwork. With leading edge manufacturing technologies and processes and visionary leadership, First Quality is positioned to continue significant growth in the coming years. We are looking for an experienced Project Engineer for our state-of-the-art manufacturing facilities located in Lewistown, PA. This position is responsible for the specification, selection, purchase, installation, and startup support of major capital projects, to improve efficiencies, quality or expand the manufacturing operation. Principal Accountabilities/ Responsibilities: Prepares timelines, schedules, and coordinates multiple disciplines to meet required schedules. Prepares equipment/line proposals, installations, startups, and validations. Analyzes trend data, troubleshoots process problems. Observes all safety rules and uses the proper safety equipment at all times. Performs other duties as necessary when directed to do so. Follows necessary GMP, FDA, and ISO regulations. Education and experience requirements: Bachelor's degree in engineering or related field. Minimum 5 years experience in process manufacturing environment. High speed, high volume production machinery experience is preferred. Maintenance background preferred. Standard knowledge and close tolerance of high speed manufacturing equipment. Standard knowledge in material handling concepts, material flow concepts, and plant layout. Standard knowledge of cost accounting principles. Excellent oral and written communication skills. Ability to identify machine, material, and/or process improvements and implementation solutions. Ability to teach/train operating personnel and write procedures/manuals. Ability to teach/train operating personnel and write procedures/manuals, Excellent compensation and benefits, which are effective the first day of employment! First Quality is committed to protecting information under the care of First Quality Enterprises commensurate with leading industry standards and applicable regulations. As such, First Quality provides at least annual training regarding data privacy and security to employees who, as a result of their role specifications, may come in to contact with sensitive data. First Quality is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, sexual orientation, gender identification, or protected Veteran status.

PennCore Consulting LLC is a consulting firm located in Tower City and Williamsport, PA, with over a decade of experience in project design and management. Our team provides sound, common sense solutions for a wide range of projects including land surveying, municipal engineering, land development, permitting, environmental services, stormwater management, and construction management. Role Description This is a full-time hybrid role for a Civil Project Engineer. The Civil Project Engineer will be responsible for designing, managing, and overseeing civil engineering projects, performing stormwater management, and site development. The role will require some in-person work in Williamsport or Tower City with flexibility for remote work bases on experience. Qualifications Civil Engineering Design and Site Development skills Experience in Stormwater Management and Quality Control Experience in ESCGP-3 and NPDES permitting Strong attention to detail and analytical skills Excellent communication and problem-solving skills Proficient with Microsoft 365 software Proficient in AutoCAD and Civil 3D Experience in land surveying is a plus Bachelor's degree in Civil Engineering or related field 3-5 years of professional experience preferred Engineering-in-Training (EIT) license preferred with the goal of obtaining a Professional Engineer (PE) license Benefits 401(K) with company matching Dental and Vision Insurance Health Insurance Life Insurance Paid Time Off (PTO)

ITS Engineer Opening in Lansdale, PA Are you ready to steer your career onto the fast track? We are seeking a dynamic ITS (Intelligent Transportation Systems) Engineer to join our forward-thinking transportation engineering team in Lansdale, Pennsylvania. This position is perfect for an individual who possesses initiative and a passion for innovation within the transportation sector. Required Skills: * EIT certification * Coursework in: ITS, electrical wiring, and/or communications network design * Familiarity with PANYNJ/PennDOT standards * AutoCAD and MicroStation proficiency If this sounds like the right lane change for your career path, please submit your application today.

We are GEA, one of the world's largest system suppliers for the food, beverage, and pharmaceutical sectors, with market-leading solutions in growing industries. Our technology and solutions enhance the quality of life. Everywhere you look, GEA is present: on breakfast tables, supermarket shelves, and in hospitals. We are proud to see that we have a positive impact on people's everyday lives. GEA Heating & Refrigeration Technologies is a global specialist in industrial refrigeration, heating and sustainable engineering solutions for a wide array of industries including, food, beverage, dairy and oil & gas. Our proven technologies provide our customers with what they value most - reliability, operating efficiency, sustainability, and long equipment life cycles that reduce their total cost of ownership. GEA provides turnkey cooling and heating installations, custom-engineered systems, compressors & compressor packages, chillers, controls, and heat pumps to meet precise temperature requirements. Responsibilities Performs routine engineering work assignments requiring application of standard techniques and procedures. Works under close supervision. Executes standard product contracts per engineering processing instructions. Provides necessary contract documentation for customer/shop requirements and subsequent follow-up assistance as required. Works with drafters to implement manufacturing and customer drawings and/or bills of materials. Works with company sales agents, customers, shop personnel, and Service department to satisfy each of their needs. Performs other duties as assigned. Qualifications Minimum Education: B.S. in Mechanical Engineering or related field Experience in application and/or development of products for industrial refrigeration is preferred. Minimum Skills: Excellent written and verbal communication skills, strong technical, analytical and organizational skills; ability to problem solve and resolve issues, detail oriented, strong interpersonal skills. American Society of Mechanical Engineers (ASME) pressure vessel experience preferred. GEA offers competitive pay and great benefits. 11 Paid Holidays PTO - Paid Time Off Medical Plans Dental Insurance Vision Insurance Health Savings and Spending Accounts Tuition Reimbursement 401k with excellent employer match Wellness Incentive Program Employee Assistance Program GEA is an equal opportunity employer. Applicants will therefore receive consideration for employment without regard to age, sex, race, color, religion, world view, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities are welcome and will be given special consideration if they are equally qualified. # engineeringforthebetter GEA is an equal opportunity employer. Applicants will therefore receive consideration for employment without regard to age, sex, race, color, religion, world view, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities are welcome and will be given special consideration if they are equally qualified.

This contract position is an on-site position that will be accountable for assisting with the instrumentation master data cleansing, documentation modification and User Acceptance Test (UAT) activities involved in the updating of the site CCMS (Computerized Calibration Management System). The candidate will be responsible for: Participation in cross-functional meetings Data mine instrument information Updating of master data as identified Contribute to the new system testing activities Support document updates/creations in preparation for implementation Assist in training activities Ideal candidate will be familiar with: Knowledge of both Pharmaceutical Utility systems as well as production floor process equipment Calibration related activities and best practices in a pharmaceutical environment Process &Instrumentation Drawings (P&IDs) Engineering Turnover packages (ETOP) SAP Technical Object knowledge and experience (Task Lists, Maintenance Plans, etc.) Large scale capital project dynamics and new program implementation Pharmaceutical change management requirements Experience: 1 to 5 Years in pharmaceutical/biopharmaceutical industry. Master data manipulation experience within a regulated environment. Skills Necessary skills include: Experience with electronic instrument databases. Preference given to ProCal and SAP experience. Ability to navigate engineering drawings (P&IDs) and Engineering Turnover Packages (ETOPs) Thorough working knowledge of Microsoft Excel, Word, PowerPoint and TEAMS. Good verbal and written communication skills. Able/Willingness to receive the vaccines required to enter various production buildings and laboratories on site. Able to climb ladders, stairs, and walk around a large production site as needed. Working hours Monday through Friday, 7:30 a.m. to 4 p.m. Will have to learn and adhere to all site safety and compliance procedures and requirements Education High School Diploma with relevant training and job-related experience, i.e., worked as an instrument project engineer or calibration technician. Preference given to related higher-level degrees and instrumentation specification experience.

Job order details: This person could have a mechanical/electrical or structural background as long as they have experience leading MEP projects. They will be responsible for the development of the staff to ensure the delivery of high-quality projects on time and within budget. This individual will be measured relative to the team's project net revenue, project PF compared to budget, and expenses, as well as other metrics such as utilization and voluntary turnover. Additionally, as MEP Project Team Leader individuals will also be expected to directly manage projects of varying size and scope. They have 10 direct reports and growing. The commercial & institutional PM/CM Team in Bethlehem, PA consists of (60 - all disciplines). Projects include schools and apartment buildings to municipal buildings and warehouses.

The Manufacturing Electrical/Software Engineer with provide expertise in electromechanical medical device manufacturing including hardware and software integration and supporting the manufacturing of FDA- and ISO-compliant medical devices. This role involves troubleshooting electrical and software-related production issues, optimizing manufacturing processes, and ensuring the successful delivery of high-quality medical devices. Key Responsibilities: Manufacturing Support & Process Optimization Develop and optimize manufacturing processes for electromechanical medical devices. Write or revise Manufacturing Work, Inspection and Test Instructions as needed. Troubleshoot electrical and software-related production issues to minimize downtime. Collaborate with cross-functional teams (Mechanical, Quality, Electrical and Software Engineering) to ensure seamless hardware-software integration. Work with suppliers and contract manufacturers to resolve component and assembly issues. Electrical & Software Integration Support hardware-software interactions, ensuring smooth communication between firmware, embedded systems, and electromechanical components. Assist in software installation, validation, and troubleshooting in the manufacturing process. Validate and test electrical and software functions to ensure compliance with design specifications. Develop and maintain test fixtures, automated test scripts, and diagnostic tools for production testing. Regulatory Compliance & Quality Assurance Ensure manufacturing processes adhere to FDA (21 CFR Part 820), ISO 13485, and GMP requirements. Participate in process validation (IQ, OQ, PQ) and risk assessments (ISO 14971). Support CAPA investigations, root cause analysis, and implementation of corrective actions. Document and maintain manufacturing procedures, work instructions, and validation reports. Continuous Improvement & Lean Manufacturing Identify and implement process improvements and efficiency enhancements. Support the implementation of lean manufacturing, Six Sigma, and cost-reduction initiatives. Analyze production data to optimize yield, reduce defects, and improve cycle times. Qualifications & Skills: Education: Bachelor's or Master's degree in Electrical Engineering, Software Engineering, Computer Engineering, or a related field. Experience: Minimum 5 years in manufacturing of electromechanical medical devices. Technical Skills: Strong knowledge of embedded systems, PCB design, circuit debugging, and software-controlled hardware. Experience with C/C++, Python, or other scripting languages for automation and testing. Familiarity with firmware, real-time operating systems (RTOS), and communication protocols (UART, I2C, SPI, CAN, etc.). Hands-on experience with diagnostics, troubleshooting, and root cause analysis of software-electrical issues. Proficiency with electronic test equipment (oscilloscopes, multimeters, logic analyzers, etc.). Experience developing and maintaining automated test systems for production. Regulatory & Quality Knowledge: Strong understanding of FDA regulations, ISO 13485, and risk management (ISO 14971). Experience with design verification, process validation (IQ, OQ, PQ), and regulatory documentation. Knowledge of cybersecurity and software validation requirements (FDA Software Guidance, IEC 62304) is a plus. Soft Skills: Excellent problem-solving and troubleshooting abilities. Strong collaboration skills with cross-functional teams. Ability to work in a fast-paced manufacturing environment with a focus on quality and efficiency. Working Conditions: This is a full-time, on-site position that requires active participation in daily operations on site at least 4/5 days of the week. Occasional travel to suppliers may be required

IntePros is seeking an experienced Mechanical Project Engineer to support a client with a large pharmaceutical capital project. This role will focus on engineering design, procurement, startup, vendor management, commissioning, and qualification. The ideal candidate will have experience with mechanical systems, including clean and dirty utilities, autoclaves, and parts washers. This position requires strong organizational skills and excellent communication abilities to collaborate effectively with cross-functional teams and vendors. The Mechanical Project Engineer will be responsible for: Reviewing engineering submittals and drawings Responding to RFIs Supporting in-field execution and startup of mechanical systems Managing Engineering closeout, including resolution of punch list items and final review and approval of Engineering Turnover Packages (ETOPs) Responsibilities Oversee mechanical engineering aspects of the project, ensuring compliance with GMP regulations and industry best practices. Provide technical expertise in the design and integration of mechanical systems. Review and approve engineering submittals from vendors and contractors. Review mechanical drawings, P&IDs, and specifications, identifying discrepancies and providing resolutions. Respond to RFIs, ensuring clarity and accuracy in engineering documentation. Support design reviews and risk assessments to ensure all mechanical systems meet GMP, FDA, and client standards. Manage relationships with equipment vendors, construction teams, contractors, and suppliers, ensuring timely delivery and compliance with project requirements. Review and validate vendor submittals, including material certifications, technical data sheets, and performance guarantees. Collaborate with cross-functional teams, including process engineers, operations, facilities, quality, validation, and construction. Participate in and coordinate Site Acceptance Testing (SAT) for critical mechanical equipment. Oversee the planning, coordination, execution, and completion of mechanical system implementation in alignment with the capital project timeline. Develop and maintain project schedules, ensuring timely delivery, installation, commissioning, and qualification of mechanical systems. Work closely with quality, validation, procurement, facilities, and metrology teams. Support the development and execution of startup and commissioning plans for mechanical systems. Support Installation Qualification (IQ), Operational Qualification (OQ), and Performance Qualification (PQ). Ensure all commissioning and qualification activities adhere to cGMP, FDA, and client quality policies. Facilitate punch list generation, review, and resolution before system handover. Provide technical troubleshooting and resolution for mechanical system challenges. Identify and mitigate risks related to system performance, compliance, and reliability. Ensure proper documentation of all engineering activities, including change control and validation protocols. Ensure all installations and qualifications meet FDA, USP, ICH, and regulatory standards. Maintain detailed project records, including vendor interactions, qualification protocols, deviations, and corrective actions. Assist in developing and revising Standard Operating Procedures (SOPs) related to system operation, maintenance, and qualification. Provide regular project updates to leadership, highlighting risks and mitigation strategies. Education and Experience Requirements Minimum 7 years of mechanical engineering experience in pharmaceutical or biotech industries. Extensive knowledge of clean and dirty utilities, autoclaves, and parts washers in a GMP environment. Strong background in engineering reviews, commissioning, qualification, and validation. Experience managing RFIs, vendor submittals, engineering drawings, and turnover documentation. Familiarity with cGMP, FDA, and ISPE guidelines for pharmaceutical manufacturing. Ability to troubleshoot mechanical systems during startup, commissioning, and qualification. Proficiency in reviewing and interpreting P&IDs, piping layouts, and engineering specifications. Excellent communication and project management skills. Experience with large capital projects.

The department provides project, site and integration engineering services using Emerson's DeltaV distributed control system and other PLCs. Engineers leverage their expertise and knowledge of control systems to work on small- and large-scale automation systems across multiple process industries utilizing different control strategies. The Electrical Controls Engineer will work in a team environment on automation projects for installed-base customers both in the office and at customer sites. Essential Duties and Responsibilities: Engineer, implement, test and commission control panels for batch and continuous control applications in the food, chemical and oil & gas industries using Emerson's DeltaV control system Provide electrical and hardware engineering support to panel design team Understand project scope, schedule, budget and quality expectations, and develop solutions to meet customer needs Provide technical support for Project Management and Sales teams Develop high quality, well-tested and documented hardware designs to meet customer specifications, including: o Functional Requirement Definition o I/O Definition o Control Panel Design o Control Strategies o System/Network Architecture o Third Party Interfaces Conduct integrated system testing Replace obsolete customer control systems with Emerson solutions, which includes: o Assessment of existing hardware and instrumentation o Specification and engineering of Emerson hardware o System design and implementation Support and coordinate Factory Acceptance/Site Tests Perform startup and commissioning functions for projects at customer sites, which include: o Construction Management o Loop Checks o Configuration Integration with functional/failure checks o Integration of Third-Party Devices/Products o Loop Tuning o Troubleshooting Issues o Customer Training Requirements The Ideal Candidate: Will possess a four-year degree in engineering or a computer discipline; emphasis will be placed on electrical engineering Has have 5+ years of process control experience or related controls or automation experience Has hands-on knowledge of current distributed control systems (DCS/PLC); emphasis will be placed on skills related to Emerson's DeltaV Has demonstrated troubleshooting and problem-solving skills and can think logically and systematically Can effectively read P&IDs, datasheets and electrical drawings Will be able to configure instrumentation and valves Will be able to program variable frequency drives. Will have a knowledge of and ability to apply NEC, NFPA, ISA, IEC, API and UL codes and standards Must have the ability to work independently and within a team environment Must have the ability to manage multiple projects and assignments Must have strong communication and customer facing abilities Must have an enthusiasm for learning new concepts and developing new skills Must be willing to provide on-site support (25-50%) which may require overnight travel (10-20%) Core Competencies: WORK COLLABORATIVELY - Promote an inclusive and positive work environment that encourages collaboration and team building across all levels of the organization. Work with others to resolve obstacles that may prevent the organization from achieving its mission. CUSTOMER FOCUS - Demonstrate the desire and knowledge to understand customer needs. Provide personalized, professional and courteous service, accurate information, continuous communication and the ability to handle customer concerns in an appropriate manner. INTEGRITY - Behave ethically, act fairly and take responsibility for accomplishing work goals. Additional Details We provide our team with everything needed for success, including world-class products, excellent initial and ongoing training and top-notch work equipment. We reward hard work and success with a competitive base salary and benefits package, as well as a retirement savings program, which includes 401(k) with company match and profit sharing. Salary is based on experience. EEO/AA/M/F/Veteran/Disability

The Glulam Project Engineer works closely with both our sales and manufacturing departments and will often be required to work directly with our clients. The ability to handle multiple projects at the same time is a must. Responsibilities Review preliminary designs with customer directly to facilitate a successful project. Provide engineers and architects with glue-laminated information specific to our products. Identify potential design issues with proposed projects and propose alternate solutions. Identify delivery and manufacturing limitations of glue-laminated projects and offer solutions when limitations are exceeded. Perform preliminary glue-laminated timber designs within parameters set by customer, contractor, architect, engineer, industry standards, manufacturing limitations, codes, and delivery limitations. Provide final design engineering on glue-laminated projects and work with both in-house and consultant engineering/drafting services to create shop drawings and cut sheets. Trouble shoot cut sheets with fabrication shop and CNC operator. Field job site and installation questions. Qualifications Bachelor's degree in Civil Engineering or similar major Basic proficiency in Auto Cad software a plus. Benefits & Compensation Competitive wages based on experience. Salary posted is for recent graduate with minimal experience. Medical, Dental, Vision, and Prescription Drug Insurance. Family coverage is also available at a minimal cost. Life and Disability Insurance Paid vacation and holidays 401K with Rigidply matching contributions

Key Responsibilities Manage or provide project support across all project phases Ensure compliance with project specifications, industry standards, and regulatory requirements Develop and execute field plans for construction, contractor oversight, and other project activities Field survey and data collection supporting engineering projects / initiatives Facilitate and participate in design review Participate in CQV execution including FAT/SAT, commissioning, and start-up activities Develop and execute CQV protocols Management and delivery of contractor turnover packages Engineering drawing management for redline, revision, etc. Coordinate with cross-functional teams that include Validation, Manufacturing, Quality, Supply Chain, and Engineering Build and maintain strong relationships with internal teams, clients, and external vendors Facilitate project meetings, ensuring effective communication and timely execution of tasks Develop capabilities in capital project management, facility builds, validation lifecycles, quality/regulatory compliance, and client management Develop knowledge and capabilities in project management Engage in ongoing learning within the life sciences to remain at the cutting edge of the industry Minimum Qualifications Bachelor of Science in Engineering Experience in pharmaceutical industry, preferably with a focus on cGMP environments Project Engineer I - 2 years Project Engineer II - 4 years Project Engineer III - 8 years Sr. Project Engineer - 10 years Demonstrated capability in leading technical project scopes In-depth knowledge of engineering principles, GMP requirements, and industry best practices Excellent communication skills, both verbal and written Proven ability to manage time effectively and prioritize tasks

H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) Great Benefits offered! Project Engineer US-PA-Hallstead Job ID: 2025-2607 Type: Regular Full-Time # of Openings: 1 Category: Engineering Pikes Creek Division Remote Office Overview The H&K Group, Inc. is searching for a Project Engineer to support projects throughout Northeast PA and the Lehigh Valley, with a current focus on Susquehanna, Wyoming, Lackawanna, Luzerne, Monroe, Carbon, Schuylkill, Lehigh, and Berks Counties. The ideal candidate is a self-motivated, organized, competent, and professional individual who manages the planning, design and permitting of civil engineering projects including, but not limited to, highways, subdivisions, and land development. Engineering experience with bridge projects is highly desired. Individual should possess a strong knowledge of stormwater, erosion and sediment control, water and sewer design principles and should be able to interpret and apply municipal land use ordinances. Why work for H&K Group, Inc.? Competitive salary commensurate with experience 100% Company-paid Health Benefits 401(k) Savings and Investment Plan Tuition reimbursement programs available to qualifying employees for approved programs Additional training programs including on the job, online through H&K Academy, manufacturer offered training, and more Responsibilities Essential Duties and Responsibilities Performs all work according to OSHA and H&K Safety policies Prepare thorough site analysis to determine allowable density and layout constraints based upon municipal land use ordinances and site-specific features. Prepare horizontal and vertical alignment of street layout and profiles. Prepare detailed grading plans. Prepare thorough stormwater management design based upon municipal land use ordinances and/or State best management practices/regulations. Prepare thorough water supply and sewage facilities design. Prepare erosion and sedimentation control/NPDES plans and post construction stormwater management designs in accordance with State best management practices/regulations. Prepare utility design and manage utility coordination for various land development projects. Manage sub-consultants related to geotechnical, wetlands, traffic, etc. Travel to field, project, Township, etc. meetings to communicate project design aspects with Project Managers, Engineers, Township officials and Clients. (A company fleet vehicle will be provided in such instances.) Ability to write comprehensive and detailed narratives and various forms of correspondence. Other duties as assigned Qualifications Required Skills, Education, and Experience Bachelor's degree from an accredited four-year college or university OR one year of related experience and/or training Equivalent combinations of education and experience may be considered Ability to read blueprints and job-related documents. Strong knowledge of stormwater, erosion, and sediment control Strong knowledge of water and sewer design principles Strong verbal and written communication skills Able to interpret and apply municipal land use ordinances Basic computer skills including MS Office (Outlook, Word, Excel) Experience with specific programs including AutoCAD 2017 (or later version) AutoCAD Civil 3D 2017 (or more recent version) Hydraflow Driver's license and clean driving record Ability to fit test & utilize appropriate PPE as needed Ability to meet physical requirements (movement, lifting, as relevant to job) Preferred Skills, Education, and Experience 2 years of relevant experience and/or training Experience using VTPSUHM OSHA or other relevant safety certifications Physical Demands Occasionally required to Stand, walk, sit Use hands to finger, handle, feel Regularly required to talk and hear Vision abilities include Close Distance Color Ability to adjust focus Work Environment Occasionally exposed to outside weather conditions Noise level is usually moderate Hours regularly exceed 40 hours a week The H&K Group, Inc. provides complete heavy civil contracting and construction materials solutions with safety, speed, quality, efficiency, and value. Beginning as a small family business a half century ago, we are now a dynamic group of vertically integrated companies that has been growing and prospering for over 50 years. Thank you for your interest in employment with H&K Group, Inc. At H&K, we invest in our people, providing the essential training, instruction, and supervisory support that they need to develop and grow within our company. We acknowledge that H&K's strength and success is directly related to our employees and the talents, dedication, and job performance they exemplify. We seek dynamic, motivated people who are driven to make a difference. Final determination on pay will be made by company leadership consistent with the scope of work and considering the candidates' education, experience, skills, past performance, demonstrated leadership, and influence. H&K does not discriminate in employment opportunities or practices on the basis of race, color, religion, gender, national origin, age, disability, veterans' status, or any other characteristic protected by law. We are always looking for the best, most qualified people to join our team. Pre-employment drug testing (EOE) 100% Company-Paid Health Benefits! PI6166d8ecd156-26***********4

Senior Electrical Engineer Pittsburgh, Pennsylvania Office RT Patterson has an immediate opening in our Pittsburgh, Pennsylvania office for a full-time electrical engineer to design and implement heavy industrial facility electrical systems. To do well in this role we would prefer that you are a licensed professional engineer and have extensive experience as an electrical engineer conforming to the following responsibilities and requirements. Electrical Engineer Responsibilities: Designing, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for heavy industrial facilities. Experience working in heavy industrial facilities and performing field investigations and assessments. Ability to complete low & medium voltage power systems, instrumentation, and controls designs. Working knowledge of Power System analysis software such as ETAP and/or SKM. Protective Device Relay configuration/programming experience is a plus. Performing a wide range of engineering tasks via computer-assisted design or other engineering software and equipment. Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects. Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, and technical drawings. Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations. Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities. Writing reports and compiling data regarding existing and potential electrical engineering projects and studies. Preparing specifications for purchases of electrical equipment and materials. Supervising or training project team members. Estimating material, labor, or construction costs for budget preparation. Design, control, and implement electrical systems and products. Manage engineering projects and deliver them on time. Define customer needs and requirements. Collaborate with engineers and technicians to design and apply new system processes. Examine needs on new equipment, calculate costs and help prepare budgets. Electrical Engineer Requirements: Bachelor's degree in electrical engineering degree from an ABET accredited school. 5-8 years relevant work experience, including internship or cooperative program experience. Licensed as a professional engineer. (preferred) Knowledge of National Electrical Code (NEC) and IEEE standards. Proficient in design and calculation software. Proven expertise as an electrical engineer. Problem-solving abilities. Attention to detail. Excellent oral and written communication skills. Strong organizational skills.

Equipment & Controls, Inc. is a successful and innovative Emerson Impact Partner. ECI provides an entrepreneurial opportunity for each employee to achieve our common mission of Delivering Successful Customer Outcomes 100% of the Time . Our customer base includes oil and gas, chemical, power, food and beverage, mining and metals, life sciences, pulp and paper, refining, petrochemical, OEM and nuclear industries. With offices in Pennsylvania, West Virginia, and Ohio, ECI is the region's leader in process control and industrial automation products and solutions. We seek individuals that share our passion for excellence. Business Unit/Department: Engineering Location: Lawrence, PA Job Description: The PSS Engineering department provides project, site and integration engineering services using Emerson's DeltaV distributed control system and other PLCs. ECI engineers leverage their expertise and knowledge of control systems to work on small- and large-scale automation systems across multiple process industries utilizing different control strategies. The Electrical Controls Engineer will work in a team environment on automation projects for installed-base customers both in the office and at customer sites. Essential Duties and Responsibilities: Engineer, implement, test and commission control panels for batch and continuous control applications in the food, chemical and oil & gas industries using Emerson's DeltaV control system Provide electrical and hardware engineering support to panel design team Understand project scope, schedule, budget and quality expectations, and develop solutions to meet customer needs Provide technical support for Project Management and Sales teams Develop high quality, well-tested and documented hardware designs to meet customer specifications, including: Functional Requirement Definition I/O Definition Control Panel Design Control Strategies System/Network Architecture Third Party Interfaces Conduct integrated system testing Replace obsolete customer control systems with Emerson solutions, which includes: Assessment of existing hardware and instrumentation Specification and engineering of Emerson hardware System design and implementation Support and coordinate Factory Acceptance/Site Tests Perform startup and commissioning functions for projects at customer sites, which include: Construction Management Loop Checks Configuration Integration with functional/failure checks Integration of Third-Party Devices/Products Loop Tuning Troubleshooting Issues Customer Training The Ideal Candidate: Will possess a four-year degree in engineering or a computer discipline; emphasis will be placed on electrical engineering Has have 5+ years of process control experience or related controls or automation experience Has hands-on knowledge of current distributed control systems (DCS/PLC); emphasis will be placed on skills related to Emerson's DeltaV Has demonstrated troubleshooting and problem-solving skills and can think logically and systematically Can effectively read P&IDs, datasheets and electrical drawings Will be able to configure instrumentation and valves Will be able to program variable frequency drives. Will have a knowledge of and ability to apply NEC, NFPA, ISA, IEC, API and UL codes and standards Must have the ability to work independently and within a team environment Must have the ability to manage multiple projects and assignments Must have strong communication and customer facing abilities Must have an enthusiasm for learning new concepts and developing new skills Must be willing to provide on-site support (25-50%) which may require overnight travel (10-20%) Core Competencies: WORK COLLABORATIVELY - Promote an inclusive and positive work environment that encourages collaboration and team building across all levels of the organization. Work with others to resolve obstacles that may prevent the organization from achieving its mission. CUSTOMER FOCUS - Demonstrate the desire and knowledge to understand customer needs. Provide personalized, professional and courteous service, accurate information, continuous communication and the ability to handle customer concerns in an appropriate manner. INTEGRITY - Behave ethically, act fairly and take responsibility for accomplishing work goals. Additional Details We provide our team with everything needed for success, including world-class products, excellent initial and ongoing training and top-notch work equipment. We reward hard work and success with a competitive base salary and benefits package, as well as a retirement savings program, which includes 401(k) with company match and profit sharing. Salary is based on experience. EEO/AA/M/F/Veteran/Disability

Electrical Engineer/Electrical Designer - Philadelphia (Mission Critical) URGENT HIRE for a Leading US Engineering firm. . This opportunity will be focused within the industrial and data center space needed. This is a fantastic opportunity to excel in an emerging specialized market! Revit experience is a must. This firm offers: Industry leading salary ESOP Flexible/Hybrid work schedules Casual dress code Market leading Learning and Development program The Ideal candidate will hold the following accreditation - PE Experience working for reputable consulting/design firm is preferable however not necessary If you are interested in this exciting opportunity, please reach out to us at ************ or ********************************* to discuss further.

CMC is working with a new client to hire an Electrical Systems Engineer with Avionic experience for an on-site role in Philadelphia, Pennsylvania on a 12-month contract position. The engineer will support aircraft in the final assembly line and experimental operations, ensuring electrical systems meet the company's safety, quality, delivery, and cost objectives. About the Role - Assist in supplier qualification activities, including environmental and EMI qualification reviews, ensuring compliance requirements are met for systems and equipment undergoing testing. Oversee the preparation and validation of type documentation required for certification, providing expertise to resolve non-compliance issues and supporting the release of test plans and reports in alignment with program milestones. Collaborate closely with DER to establish and demonstrate compliance with applicable technical, programmatic, and certification requirements. Provide technical support for on-site prototype activities and production lines as a sustaining engineer, assisting in the preparation, verification, and integration of certification plans and oversight activities to ensure compliance. Conduct and support AW609 electrical testing and analysis to demonstrate compliance with certification requirements, integrating supplier qualification findings in accordance with program priorities and departmental best practices. Responsibilities Support supplier qualification activities, including environmental qual, EMI qual reviews. Ensure conformity requirement are covered for the systems/equipment under compliance testing. - 30% Coordinate the substantiation of type documentation required to meet the approved certification basis, providing expertise for resolution of non-compliance, support releasing of test plans/reports in accordance to program milestones. - 20% Work closely with DER in finding/showing compliance to applicable technical, programmatic and certification requirements. - 25% Support preparation, verification and integration of the applicable certification plans, reports and oversight activities which show compliance. - 25% Qualifications - Bachelor's degree in Electrical Engineering or equivalent specialization. Minimum of 5 years of experience in engineering environment, preferably aerospace. Combination of education and/or experience which would permit performance of essential duties and responsibilities. Required Skills Good knowledge of aircrafts electrical systems installations as well as the standard aeronautical design, qualification, and certification procedures. Proven experience to create engineering reports, communicate them efficiently across a diverse, complex, and multicultural organization. General understanding of engineering methodology, tools, and processes. Communication and presentation skills, ability to effectively communicate to different levels of the organization. FAA Certification processes experience is a plus. Domestic and International travelling for short periods may be required on an occasional basis. Preferred Skills - MS Office package, PLM tools (VPM, DBT, ENOVIA), SAP (fundamentals); CAD - SoldWorks, Catia V5 (Preferred)