Engineer Jobs in Monrovia, CA

At Technip Energies, we are more than just a leading engineering and technology company; we are pioneers committed to shaping a sustainable future. With over 65 years of experience and 15,000+ talented professionals worldwide, we deliver innovative solutions to real-world energy challenges. We believe in the power of collaboration, diversity, and an inclusive culture where your well-being is a top priority. Join us on a one-of-a-kind journey where you can take pride in Being Part of the Solution for the benefit of our planet, people, and communities. If you share our vision of driving the transition to a low-carbon future and are eager to develop your skills for tomorrow, then this could be the perfect opportunity for you. We are currently seeking a Principal Rotating Engineer, to join our team based in Claremont, CA. About The Job The Principal Rotating Engineer must be familiar with and have the ability to perform engineering analysis of the equipment design, specification and selection of rotating machinery and auxiliaries. This candidate must have strong interpersonal, oral, and written communication skills. Must be capable to interface with clients, equipment manufacturers, other engineering disciplines. Also, this candidate must have knowledge of the applicable codes, standards and practices related to rotating equipment. Responsibilities Ownership of the complete gas compression system on assigned projects. Review gas compression system design. Prepare compressor design, engineering, and performance requirements. Perform technical evaluation of gas compression systems, and recommend optimum selection. Prepare technical specifications and equipment performance requirements. Perform technical evaluation of all types of rotating machinery and auxiliaries Recommend the optimum alternative from a list of systems or equipment Review system design associated with rotating equipment Review and approve drawings, P&IDs, technical documents, inspection reports, etc. Works within a multi-discipline engineering environment. Interface with clients and equipment suppliers Ensure equipment compliance to technical requirements. Estimate man-hour and cost of systems and equipment Manage man-hour and cost on assigned project. Analyze and troubleshoot field problems File technical reports and make recommendations to resolve field problems. Participate in HAZOPs, operability, constructability, criticality reviews. Qualifications Bachelors Degree in Mechanical Engineering or related field Have at least 10 years experience working with rotating equipment in the Oil & Gas, Power, or related industry. PE license preferred Strong engineering fundamentals Proven experience with API-617 & API-618 compressors and auxiliaries Benefits: Base Salary: $125,000 - $159,000 Competitive benefits package Hybrid work schedule Chance to work with a diverse team and experts in a growing industry Collaborative and innovative work environment with opportunities to contribute to cutting-edge projects What's next? Once receiving your application, a recruiter performs an initial check between your skills and qualifications with our stated requirements prior to a detailed and focused review by the hiring manager. We expect to take up to a few weeks to perform that review. You will hear from us, if we feel your skills and experience are a match, and we want to organize interviews and meet you physically or virtually depending upon the location. To have an overview of the recruitment process, please visit our dedicated webpage here We invite you to get to know more about our company by visiting *********************** and follow us on LinkedIn , Instagram for company updates. It is the policy of Technip Energies to provide equal opportunity for all qualified persons and not to discriminate against any applicant for employment because of race, color, religion, national origin, sex, sexual orientation, age, disability, veteran status, citizenship, or any other characteristics protected by federal, state or local law at the Technip Energies location to which this application is submitted. In Addition, as a Federal Government contractor, Technip Energies is an affirmative action employer. If you require accommodation during the application process, please contact the local Human Resources Department.

At Disney, you will help encourage that magic by enabling the teams to push the limits of entertainment and build the never-before-seen! Are you ready to join this team and make an impact? You already know what its like to work as an Operating Engineer, but can you envision using your skills at a place like Disney! You would work to support both theme parks at the Disneyland Resort. Operating Engineers perform operational and functional checks of central plants for our facilities and world-famous attractions, providing direct support to Resort-wide hot water, chilled water, and compressed air requirements. They keep our Guests comfortable by performing troubleshooting and repair of systems and equipment (boilers, chillers, compressors), installations, maintenance, and quality checks of completed work. If you would like to take on this challenge, apply today. (Local, Southern California applicants sought - NO RELOCATION OFFERED.) Basic Qualifications : You must be at least 18 years of age to be considered for this role Technical Abilities Journeyman Operating Engineer or maintenance machinist experience Unlimited CFC license Background as a Utilities Man Class A or C, Boiler Technician Class A or C Ability to use special tools and equipment Familiarity with pumps, compressors, boilers, chiller units, cooling towers, and associated equipment Familiarity with alignment of pumps and shafts Ability to read and interpret blueprints and schematic Familiarity with, or have the ability to learn, the Computerized Maintenance Management System ("Maximo") Additional Information : SCHEDULE AVAILABILTY Our Theme Parks and Resort Hotels operate 24 hours a day, 365 days a year. Availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. Availability to work overtime as needed. SUBMITTING YOUR APPLICATION After clicking “Apply Now” below, the employment application will open in a new window. Please complete ALL pages of the application by clicking “Next” on each page, then “Submit” on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere The pay rate for this role in California is $38.48 per hour. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit: ****************************************

Product Development Engineer | $110,000 - $130,000 | Full-Time | Torrance, CA Kelly Engineering is seeking a Product Development Engineer for our client in Torrance, CA, specializing in mobility solutions for children and adults. This is a full-time, onsite role offering a salary range of $110,000 - $130,000 per year (Based on experience) and excellent benefits. About the Role: As a Product Development Engineer, you will be at the forefront of product innovation, leading the development of mechanical mobility solutions from concept to production. This position is perfect for a hands-on engineer who thrives in a collaborative, fast-paced environment and enjoys problem-solving, vendor collaboration, and full product lifecycle ownership. Key Responsibilities: ✔ Design mechanical systems including tubing/extrusions, plastic components, and articulating mechanisms. ✔ Lead new product development (NPD), ensuring high-performance and manufacturability. ✔ Develop 3D models, 2D drawings, and BOMs using SolidWorks and PLM systems. ✔ Perform engineering analysis, simulations, and physical testing (strength, durability, regulatory compliance). ✔ Collaborate with vendors to resolve technical challenges and ensure quality production. ✔ Conduct root cause analysis and implement corrective actions. ✔ Work closely with cross-functional teams to bring products to market successfully. What We're Looking For: 🔹 5-7 years of experience in mechanical product design & development (Automotive, Class I/II Medical, or similar industries preferred). 🔹 Strong background in full product lifecycle development (from concept to release). 🔹 Project management experience (leading NPD efforts). 🔹 Proficiency in SolidWorks (kinematics and FEA preferred). 🔹 Experience in design for manufacturability (tubing, welding, machining, assembly). 🔹 Familiarity with physical product testing (ISO, FDA, regulatory standards). 🔹 Excellent problem-solving and teamwork skills. 🔹 Bachelor's degree in Mechanical Engineering or related field. What's in It for You? ✅ Competitive salary ($110,000 - $130,000 per year Based on experience) ✅ Comprehensive benefits package (medical, dental, vision, 401k match) ✅ Career growth in a dynamic, hands-on R&D environment ✅ Opportunity to work on meaningful mobility products that improve lives ✅ Onsite role in Torrance, CA (Full-Time) 🔹 Apply Now! If you're a skilled Product Development Engineer ready to take ownership of exciting projects, we want to hear from you. Click Apply Now to submit your resume!

3D-SensIR (DBA Acqubit) designs and develops Infrared LIDAR sensor arrays and cameras for military and space applications. We are looking for a highly motivated and enthusiastic person to lead in building infrared photodetector array products for space applications. Acqubit is currently qualifying these infrared focal plane arrays and sensors for space applications. The successful applicant will be responsible for testing infrared focal plane arrays, especially infrared avalanche photodiode arrays and focal plane arrays. We offer excellent growth opportunities, flexible time, and health benefits. Primary Duties and Responsibilities: · Perform electrical and optical testing of in-process wafers, detectors, arrays, and focal plane array assemblies · Analyze test data to evaluate performance and identify trends, anomalies and/or failures · Develop and use novel measurement systems, test procedures, and software · Operate, troubleshoot, repair and maintain testing equipment · Work closely with senior technical staff to perform experiments and document experimental findings · Read, understand and follow schedules, follow written instructions and document results, including technical reports · Strong team member, able to work well with other team members · Follow all safety guidelines and procedures, including the use of personal protective equipment and the handling of hazardous materials · Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements, and programs Required Skills: · At least 3 years of testing avalanche photodiodes, optoelectronic and optical devices · Basic knowledge using electronic test equipment such as power supplies, source meters, oscilloscopes, etc. · Coding experience in any of the following languages: C#, C++, Matlab, JAVA · Experience running testing software using programs from software such as LabView, Matlab and others · Proficiency with Microsoft Office tools (Word, Excel, and PowerPoint) and ability to create charts and communicate clearly · Know how to read and understand schematics · General laboratory and cleanroom practices · Exceptional time management and organizational skills · Strong oral and written communication skills with an attention to detail, and excellent documentation capability · Candidate should be enthusiastic and highly self-motivated · Ability to adapt to a flexible and changing schedule EDUCATION/EXPERIENCE: · Bachelor's degree in relevant science or engineering discipline · Citizen or permanent resident of the United States

The Turbo Manufacturing Engineer is responsible for developing, optimizing and maintaining the processes and operations within the production of turboexpanders (machining, welding, balancing, assembly). They are responsible for staying apprised of best practices in the industry to help reduce production costs and finding more effective ways for producing Turbo's products, while still maintaining (or improving) the desired quality for its customers. The Manufacturing Engineer will be responsible for: ● Comprehending in-house and vendor manufacturing and assembly capabilities, and using this knowledge to establish the Bill of Operations (BOO) for all parts. ● Utilizing engineering drawings from various software like SolidWorks and AutoCAD to determine the most cost-effective and time-efficient methods for part production. ● Understanding and implementing capitalization and improvement strategies derived from previous projects, commissioning, and operational issues. ● Developing and implementing fixtures and tools to ensure efficient production and adherence to part specifications. ● Conducting analyses of manufacturing operations with the goal of continuous improvement and cost reduction. ● Collaborating with design engineers, offering feedback on design simplification, cost reduction, and quality and safety improvement. ● Creating, updating, and maintaining manufacturing Standard Operating Procedures (SOPs). ● Coordinating maintenance and repair services to ensure all equipment remains in good and safe working condition. ● Staying abreast of emerging technologies and industry best practices, and evaluating and recommending new manufacturing processes and equipment to enhance productivity, quality, and cost-efficiency. ● Participating in cross-functional teams to address manufacturing issues, implement process improvements, and introduce new products and technologies. ● Ensuring compliance with all safety regulations and company policies, and actively promoting a safe working environment. ● Training and mentoring junior engineers and technicians, and providing technical guidance and support to other departments. Highest Level of Education Required for this Position: Bachelor's degree (Mechanical or Industrial engineering preferred) with a minimum of 2-5 years of relevant experience in manufacturing environment. Qualifications (IE SAP Experience, Excel Knowledge, Any Certifications, Years of Experience in Certain Fields): ● Proficient with Google Workspace ● Proficient with SAP (Routing and Production Versions in Material Master Record) ● Proficient with Solidworks or other 3D CAD software ● Ability to read, understand and interpret engineering drawings, including proficiency in ANSI Y14.5 geometric dimensioning and tolerancing ● Knowledge of AWS and ASME section IX ● Knowledge of manufacturing standard operating procedures ● Knowledge of assembly, balancing, machining and grinding processes (CNC experience would be a plus) ● Ability to analyze and plan work flow, equipment placement and space requirements to improve manufacturing efficiency.

100% Onsite - Regular hours 1. Analytical Equipment Troubleshooting 2. Commissioning, Qualification, and Validation of Analytical Equipment 3. Manufacturing Support The Sr. Engineer, Analytical will lead the troubleshooting and vendor support for a wide variety of analytical equipment that supports manufacturing. Scope includes a wide range of devices such as Cell counters, metabolite analyzers, blood gas analyzers, osmometers, spectrophotometers, endotoxin analyzers, TOC analyzers, and filter integrity testers. The qualified candidate will work with the analytical team to ensure uptime of equipment, improve reliability, coordinate troubleshooting activities with the team and vendor, manage preventative maintenance, spare parts, SOPs, and forms, and help drive continuous improvement activities. Responsibilities: - Work cross-functionally with individuals and project teams in Analytical, Engineering, Instrumentation, and Manufacturing. Determine technical coverage and proper integration of different subsystems. Create and execute to project plans and schedules. Review qualification documents and other related development documents for assigned projects. Provide deep technical assistance for other support staff and operators using equipment. Support of different equipment in multiple buildings within the Amgen Thousand Oaks campus Skills: BS in Engineering, Biotech, Chemistry, or Equivalent and previous experience in a biotech/pharmaceutical industry with focus on usage and/or analytical equipment of specified equipment - 5 years current experience with analytical processes and GMP procedures. Strong background in troubleshooting, root cause analysis, and vendor coordination. Must be capable of working on multiple projects in a deadline driven environment.

Application Engineer - BESS Compensation: $125,000 - $145,000 base, bonus Join a fast-growing company revolutionizing Battery Energy Storage Systems! Led by a team of industry experts, they specialize in the design & commercialization of integrated BESS systems globally. If you're ambitious, driven, and eager to shape the energy transition, this is your opportunity. Role Overview: As an Application Engineer, you'll lead the commercialization of solutions, working cross-functionally to support the engineering & manufacturing teams, and the sales teams on the market-roll out of these solutions. Key Responsibilities: Key role in project sizing & technical-economic analysis - assessing customer requirements, to develop solutions Lead the development of technical & economic models to assess feasibility Work closely with the sales team to provide pre-sales support - leading technical reviews, support on RFPs & RFQs Manage compliance & regulatory approvals (UL certification, CEC listing & TM2 processing for BESS products) Key Requirements: Proven experience in renewable energy project development (BESS, solar, or wind) Experience working with C&I or utility-scale BESS projects Strong knowledge & understanding of industry standards & regulatory requirements Proficiency in energy storage software tools, AutoCAD, 3D modelling tools Proactive mindset with exceptional communication skills Bachelor's or Master's in Electrical Engineering, Energy Systems or related field What's on Offer: Shape the future of energy storage in a high-impact role A dynamic, ambitious, and innovative work environment Competitive compensation and growth opportunities Apply now and help build the future of energy!

What does your group do?Component & Supplier qualification for THV delivery system and implant devices. Does your team use any specific technology/software you want us to look out for? MS Office, Keyence, Smartscope, SolidWorks, Minitab, PowerBI What will a typical workday look like? Meeting with cross-functional team members, component drawing reviews developing inspection methods & fixturing, reviewing/analyzing data, tracking & reporting on status, validation protocol/execution/reports - for fixtures & test methods, supplier meetings, supporting supplier process validations, supporting receiving inspection issues (MRBs, NCRs, etc.), creating & releasing qualification reports, inspection measurement plans, SOPs, inspection process sheets What will the work schedule be? Can any overtime be expected? Typical office hours: exact start and stop times can be flexible. This role will be full time onsite at the Irvine campus. What specific product would this person be working on? The first device is a novel highly complex (>50 parts) system inclusive of a delivery system and a permanent implant. They need to be able to apply the first principles of engineering and understand how material properties impact stress and strain response, they have to understand tolerance stack-up and how to design for anticipated production variance. What are your top 3 required technical skills? Must haves? Project & time management/organization/planning, Minitab/data analysis, problem solving What are nice to have skills? Inspection development, Risk management, SolidWorks/Creo, Six Sigma

We are looking for SAP Cloud Application Programming Model (CAP) Lead developer to play a key role in extending and supporting the SAP solutions. In this role, you would leverage the SAP Cloud Application Programming Model to implement business solutions. You would assist/advise the internal and external clients on SAP BTP/CAPS best practices and provide design and implementation specification for the approach/solution. You are expected to: Mentor, advise and assist junior team members with their challenges Participate in application design, focusing on development, analytics, and integration with the SAP Business Technology Platform. Support the customers in their business, process, and technology designs by aligning the work of a team of architects from a technical point of view Execute software design, development, and implementation of new functionalities and enhancements to business systems (mainly S/4Hana, and SuccessFactors) Able to process complex business requirements into a manageable and executable solutions Provide guidance and participate in building Work Zone workspaces Prepare data model and technical and functional specifications Work closely with cross functional, internal and external, business clients. Requirement of the role 8-10 years of experience with SAP Business Application Studio, CAPM and Work Zone (adv.) Create and optimize data models using Core Data Services (CDS) and deploy them to HANA Database. Develop and refine Complex Query Language (CQL) queries. experience with SAP BTP components including Destinations, Connectivity, XSUAA, Event Mesh, Job Schedulers, and Multi-Target Applications (MTA). Experience in CAPM best practices and development using Node and Java Demonstrated experience working in an Agile development environment Solid understanding of Integration principles and patterns, technologies, and protocols (SFTP, Encryption, REST, ODATA, SFAPI, SOAP, XML, JSON, IDOC Message queues, Identity management, SAML, OAUTH) Deep understand of Adv. Work Zone, best practices and developing role-based workspaces to access SAP and external application Hands on with SAP Business Process Automation Clear understanding of DevOps, CI/CD concepts and Pipeline deployment and setup Knowledge of ABAP Proxies: Inbound and Outbound Proxy - able to communicate with SAP Basis and identify requirements

Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Mission Integration Engineer As a Mission Integration Engineer, you will be the primary technical liaison between Castelion and our government customers, supporting the integration of advanced weapons systems into operational environments. You will drive the entire lifecycle of weapons programs, from early capability studies through prototype development, test, and operational deployment. This role requires a combination of deep technical expertise, strong program execution skills, and the ability to engage directly with government stakeholders. You will work closely with internal teams across engineering disciplines including propulsion, avionics, guidance/navigation/control (GNC), software, flight test, and manufacturing to ensure mission success. Responsibilities Serve as a customer interface, ensuring alignment between government mission requirements and Castelion's weapon system designs. Support all phases of the program from concept development and initial proposals through successful test, flight, and deployment. Lead mission planning and test efforts, ensuring end-to-end system integration and operational readiness. Work across internal teams to develop and execute prototype development strategies, ensuring timely delivery of cutting-edge weapons solutions. Collaborate with engineers and leads to optimize weapons system performance through design trades and cross-discipline coordination. Represent Castelion at customer meetings, design reviews, test campaigns, and technical demonstrations. Ensure contract deliverables are met on time and to customer specifications. Provide technical leadership in weapons system verification and test planning, ensuring robust validation and mission success. Support live-fire and flight test operations, including pre-test analysis, real-time mission support, and post-test evaluation. Maintain an in-depth understanding of government acquisition processes, certification requirements, and compliance standards. Basic Qualifications Strong passion for advancing national security and a deep commitment to developing cutting-edge defense technologies to support the warfighter. Bachelor's degree in aerospace engineering, mechanical engineering, electrical engineering, physics, or a related technical field. 2+ years of experience in systems engineering, mission integration, or related roles within the defense or aerospace industry. 2+ years of experience in technical project management and/or weapons system development. Experience working with DoD or other national security agencies. Hands-on experience with launch vehicles, weapons systems, or other aerospace defense platforms. Strong ability to analyze and synthesize complex technical information and communicate effectively with both engineers and external stakeholders. Ability to obtain and maintain a Top Secret/SCI security clearance Preferred Qualifications Master's degree in a relevant technical field. Experience with hypersonic weapons, missile defense, or advanced guidance systems. Strong background in spacecraft or missile mission design, development, integration, and/or test. Ability to work under pressure and manage multiple parallel priorities effectively. Highly detail-oriented with strong analytical, verbal, and written communication skills. Active Top Secret/SCI security clearance preferred. Additional Requirements Ability to travel up to 25% of the time for customer meetings, test campaigns, and program execution. All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medial, vision, and dental insurance, and the company offers three weeks of paid time off per year. Leadership Qualities Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support. High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Acara Solutions is looking to hire a results driven Manufacturing Engineer to provide design engineering expertise to bring mechanical product development projects from concept to manufacturing reality as well as value engineering of the existing products. Location: On-site in Burbank CA Job Overview: The position will provide design engineering expertise to bring mechanical product development projects from concept to manufacturing reality as well as value engineering of the existing products. Responsibilities: Lead and manage assigned projects. Coordinates external and internal resources as needed. Create / improve product design data as required (3D models, 2D drawings, Bills of Material, etc.) Verifies designs through calculation / analysis / computer aided modeling methods Develops test plans, and directs or executes testing activities (as needed) Responsible for multiple projects with varying scope and/or complexity Responsible for reporting and measuring progress on assigned projects. Previous experience must lie in Industrial / Commercial Product Manufacturing as an engineer developing, releasing, and improving products. Required Skills / Qualifications: Bachelor's Degree in Mechanical Engineering with at least 2+ years of practical experience. Preferred Skills / Qualifications: Demonstrates ability to apply research to the planning, design, development and testing of mechanical and/or electro-mechanical systems. Proficiency in 3D Modeling and drafting. Inventor experience preferred. Excellent visualization & conceptualization skills Must be able to develop relevant experiment designs, analyze data, form appropriate conclusions, and create appropriate models needed for system simulation. Experience with pressure vessels, compressors, pumps, or valve design preferred. Intermediate to advanced software programming experience (Python, or similar)

As an AGSE Product Development Engineer you will design, develop, and provide engineering support through all phases of the process including concept proposals, detail drawings, and production support. You will work with an experienced engineering team supporting domestic and international customers to deliver top quality products that meet or exceed customer and OEM aircraft engine maintenance requirements. Applicants must be able to apply technical skills and attention to detail in preparing design documentation such as drawings, calculations, meeting notes, specification compliance, test procedures/reports, and operations/maintenance manuals. You will support Production, Quality Assurance, Sales, and customers as needed. Some travel for product support may be required. JOB DUTIES AND RESPONSIBILITIES 1. Prepares technical design packages to include design layouts, stress analysis (hand and FEA calculations), deflection calculations, assembly and detailed drawings, requisitions for components, and initial drafts of maintenance and service manuals. 2. Checks contents of technical design packages for compliance with requirements, fit, form, function, and material selection. 3. Coordinates with Sales and Production during the product design cycle with verbal and written communication of project issues. 4. Prepares test procedures, supervises the testing, and prepares test reports. 5. Supports design reviews by documenting compliance with design requirements, answering customer questions and/or assigned actions, and ensuring all outstanding issues are closed. 6. Responds to customer service requests by promptly providing engineering support and answers to questions. 7. Any other duties as assigned by management. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS 1. BS in Engineering (Mechanical, Civil, Structural, Industrial) 2. Proficiency in mechanical drafting. 3. Familiarity with steel fabrication desired. 4. Strong engineering analytical skills (stress analysis, deflection analysis, dynamics/kinematics). 5. Proficiency in one or more CAD programs (AutoCAD & Inventor preferred). 6. Good verbal and written communication skills. Job Type: Full-time, On-Site Pay: $66,560.00-$90,000.00 per annum Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: Monday to Friday Ability to Relocate: Santa Fe Springs, CA 90670: Relocate before starting work (Required) PHYSICAL REQUIREMENTS & WORKING CONDITIONS While performing the duties of this job, employees are regularly required to sit, walk and stand; talk or hear, both in person and by telephone; use hands repetitively to finger, handle, feel or operate standard office equipment; reach with hands and arms; and lift up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, and the ability to adjust focus. The work environment characteristics described here represent those employee encounters while performing this job's essential functions. Reasonable accommodation may be made to enable individuals with disabilities to perform essential functions. Employees work under typical office conditions, and the noise level is usually quiet to moderate. However, in certain assignments, an employee may work near moving equipment and be exposed to toxic or caustic chemicals, biological hazards, airborne fumes, outdoor weather conditions, and loud, prolonged noise.

The Manufacturing Engineer will be responsible for creating and maintaining comprehensive technical documentation, including user manuals, service guides, and assembly instructions, to ensure smooth manufacturing processes. This role will involve designing product visualizations such as 3D drawings, exploded views, and animations to support product assembly and training. The Engineer will work closely with manufacturing teams, vendors, and engineering departments to optimize processes, improve assembly procedures, and ensure that documentation meets regulatory and quality standards. A strong emphasis will be placed on collaboration across functions to troubleshoot issues, maintain version control of technical documents, and ensure product compliance with industry certifications. Additionally, this role will support the development of training materials and tools necessary for efficient and safe product assembly and maintenance. Key Duties & Responsibilities Technical Documentation & Product Visualization Create and maintain user manuals, service manuals, and assembly guides with clear, well-structured content. Develop 3D drawings and illustrations, including exploded views for product assembly and technical documentation. Design product labels that align with brand, regulatory, and manufacturing requirements. Assist in the development and editing of training videos for product usage, assembly, and maintenance. Utilize rendering tools to enhance product visualizations and create assembly animations for training. Maintain version control of all technical documents and update materials as needed. Manufacturing & Engineering Support Collaborate with factories and production teams to develop work instructions, SOPs, and assembly process documentation. Work closely with teams from engineering, quality, and our vendors/factories to ensure that technical documents reflect accurate manufacturing processes. Support factory process optimization by identifying and documenting assembly improvements. Assist in designing jigs, fixtures, and tools documentation for manufacturing. Quality Control & Compliance Ensure all technical documentation meets regulatory standards and industry certification requirements (CE, FCC, UL, etc.). Conduct quality control checks on documentation to ensure alignment with manufacturing and safety standards. Participate in failure analysis and root cause investigations, ensuring proper documentation of findings and corrective actions. Cross-Functional Collaboration & Vendor Communication Work closely with overseas vendors and factories to obtain technical specifications and clarify manufacturing requirements. Assist in troubleshooting hardware-software integration issues in production and assembly. Provide clear technical reports to management, including manufacturing bottlenecks and recommendations for process improvement. Experience Demonstrated ability in technical writing for user manuals, service manuals, and assembly guides. Experience in creating 3D exploded views and step-by-step assembly guides. Proficient in designing product labels for consumer or industrial products. Familiar with documentation management systems and version control processes. Collaborative work with manufacturing teams, suppliers, and production engineers. Experience with hardware-software integration, particularly in fitness or embedded systems. Hands-on experience with mechanical or electronic assembly processes (a plus). Experience with video editing tools for training content (a plus). Experience in the fitness industry, consumer electronics, or industrial manufacturing (a plus). Knowledge & Skills Strong knowledge of manufacturing documentation, assembly procedures, and quality control standards. Proficiency in 3D drawing and rendering tools (e.g., SolidWorks, or similar). Strong understanding of text editing tools, including Adobe InDesign and Microsoft Word. Basic knowledge of product certification processes (e.g., CE, FCC, UL). Strong problem-solving and troubleshooting skills, especially in manufacturing and product integration. Knowledge of CAD-based modeling and rendering for technical illustrations and manufacturing guides. Understanding of service procedures, repair documentation, and warranty processes. Ability to speak or understand Mandarin to communicate with overseas vendors (a plus). Knowledge of video editing tools for training content (a plus). Education Bachelor's Degree in engineering or related field preferred. There are so many reasons to join us here at Centr but here are just a few: Competitive salary package, commensurate with your skills and experience Open and modern working environment with a great team Opportunity to work with modern technology and products Smart, motivated and collaborative coworkers who are here to support your growth

We're partnered with one of the hottest startups in Aerospace, who are breaking down barriers of what's possible with their technology. They are looking for elite Electronics Engineers to join their incredibly talented team. They want people who move fast at the highest level, contributing to their continued, meteoric growth. My client is dedicated to developing the next generation of RF products and services for the most demanding space and defense missions. They are known for offering exceptional opportunities and value to their engineers. Key responsibilities: Design, test and deploy digital circuit boards (ie. PCBs), from schematic to layout. Bridge analog and digital domains with RF engineers. Ensure compliance with space-grade performance standards. Optimize manufacturing with supply chain teams. Requirements: Strong experience with EDA tools for digital circuit design. Proficient in using digital processing elements such as Xilinx or an equivalent platform. Some experience with RF products or the aerospace industry. Familiarity with developing onboard interfaces. If you are ready to advance your career, then apply through the link now!

The System Engineer is responsible for designing, implementing, and maintaining complex IT systems within an organization, ensuring smooth operations by overseeing system infrastructure, troubleshooting issues, and optimizing performance. Essential Functions and Responsibilities Determines system specifications: input/output processes and working parameters for electrical/hardware/software compatibility required by the customer. Assists in the coordination of the design of subsystems and integration of total systems. Includes a variety of engineering and systems techniques including system testing. Incorporates technologies from multiple disciplines including mechanical engineering, electrical engineering, electro-magnetics, digital signal processing, and control theory. Recommends design changes to improve overall system performance. Responsible for the technical portion of the CRA (Change Request Authorization) Responsible for the creation and maintenance of the PDD (Product Definition Document) which may be stored electronically in a database. Identifies, analyzes, and resolves program support deficiencies. Develops and recommends corrective actions. Responsible for system-level evaluation and testing for compliance of components by specifications including the clarification of requirements for the test authors. Responsible for communication with customer/resident engineer regarding design definition in conjunction with the engineering lead/manager for the program. Responsible for communication with factory engineering, and validation engineering regarding design/test issues. Responsible for developing and executing Customer and Factory Acceptance test plans. Assist Program Managers with special assignments and engineering tasks in developing, prototyping, testing, and producing custom systems for specific project needs. Coordinates electrical/software /mechanical design and determines the most appropriate implementation trade-off (electrical -VS - software) of design. May make recommendations for the future direction of the product. May perform limited project management duties. Prepares records, charts, graphs, and other statistical information in the testing documentation process. Will initiate, recommend, or provide solutions through designated channels. Nonessential Functions: Perform other duties as assigned. Qualifications BCSC/BSEE/BSME/ISE/AE degree or equivalent technical degree in engineering or a minimum of 3 to 5 years as a Systems Engineer, Project Engineer, Field Engineer, Electronics or Field Technician. Specific experience in an electronics manufacturing environment preferred. Broadcast or satellite engineering, Electronics circuit assembly and troubleshooting, Mechanical assembly and troubleshooting, AutoCAD, Read and interpret electronic schematics and mechanical assembly drawings, Audio/video/multi-media; navigation; hard drives and electronic test equipment. Must be a U.S. citizen or Green Card holder for authorized access to controlled technology/data as subject to ITAR Valid Driver's License Valid passport Required Skills and Abilities Proficient user of MS Office Suite, Teams, Asana Proficient user of ERP, MRP, Adobe; uni Point preferred Supervisory Responsibilities: This position has no supervisory responsibilities

Satellite Systems Engineer Onsite: Irvine Salary: $120/140,000 We are seeking a skilled Satellite Systems Engineer to play a key role in designing, developing, and optimizing advanced satellite systems and subsystems. This position covers all phases of the satellite lifecycle, from concept development through testing and deployment, ensuring performance, reliability, and mission success. Key Responsibilities System Design: Develop and design satellite systems, including payloads, bus components, and ground infrastructure, ensuring alignment with mission objectives and performance requirements. Integration & Testing: Oversee system integration, including both hardware and software elements. Lead testing and validation processes to guarantee functionality and reliability. Requirements Analysis: Define and analyze system requirements, including performance, interface, and operational specifications, ensuring compliance with mission goals. Project Management: Oversee development timelines, resource allocation, and risk mitigation strategies to ensure project milestones are met efficiently. Technical Support: Provide expert guidance to engineering teams, troubleshooting and resolving complex technical challenges. Documentation: Maintain detailed records of system designs, testing procedures, and performance assessments, ensuring compliance with industry standards and regulatory requirements. Collaboration: Work closely with multidisciplinary teams, including software, hardware, and manufacturing specialists, to drive successful system integration and mission execution. Qualifications Minimum Requirements: Education: Bachelor's degree in Aerospace Engineering, Electrical Engineering, Systems Engineering, or a related discipline. Experience: At least 4 years of experience in satellite systems engineering, with direct involvement in satellite design and integration. Technical Skills: Proficiency in satellite design tools (e.g., MATLAB, STK) and a strong understanding of satellite subsystems, including communications, propulsion, and power systems. Project Management: Experience in engineering project management, including scheduling, resource management, and risk assessment. Analytical & Problem-Solving Skills: Ability to diagnose and resolve complex system challenges efficiently. Communication: Strong written and verbal communication skills, with the ability to collaborate across teams and present technical concepts clearly. Security Clearance: Must be eligible to obtain a Secret and/or TS/SCI clearance. Preferred Qualifications: Education: Master's degree in Aerospace Engineering, Electrical Engineering, Systems Engineering, or a related field. Experience: 6+ years of experience in satellite systems engineering, particularly in high-precision or mission-critical applications. Advanced Skills: Expertise in advanced satellite design, including payload development and satellite ground systems. Certifications: Industry-recognized certifications in systems engineering or satellite technology (e.g., CSEP, SEP). Industry Background: Experience in aerospace, defense, or space technology, particularly with complex satellite missions. Innovation: Proven ability to develop innovative solutions in satellite engineering. This is a great opportunity to contribute to cutting-edge space missions in a fast-paced and collaborative environment.

Our client is seeking a highly motivated Manufacturing Engineer II to drive manufacturing process analysis, improvement, and validation, with a focus on implantable devices. This role will collaborate closely with management, internal engineers, and external vendors to enhance process and component quality, while also identifying cost reduction and quality initiatives to ensure long-term product value and viability. You will contribute to optimizing device design and manufacturing processes to reliably and repeatedly produce implantable components that meet design input and product specifications. Located in Orange County we are looking for a hands-on individual with exceptional communication, organizational, problem-solving, and technical skills, and a willingness to travel both nationally and internationally. Due to outsourced manufacturing, significant national travel to supplier sites (up to 50% of the time) is required. The ideal candidate will thrive in complex and ambiguous environments, while maintaining a clear understanding of the overall project goals. RESPONSIBILITIES Develop, analyze, improve, and validate manufacturing processes, focusing on polymeric implantable devices. Identify, design, install, and validate equipment. Manage internal and external resources to reduce costs and improve supply chain efficiency. Validate processes using statistical process analysis. Develop test plans to define acceptable tolerance ranges that meet design input and product output specifications. Create and optimize work instruction documentation for manufacturing and assembly. Define product output specifications related to manufacturing processes. Plan, schedule, conduct, and coordinate detailed phases of manufacturing work. Support scheduling, ordering, vendor relations, and internal manufacturing environment management. Participate in failure analysis and corrective action activities to guide design and process modifications. Provide technical liaison, coordination, and collaboration with technicians. Support risk analysis, requirement definition, and regulatory submissions. Support and manage process risk analysis, including key suppliers. Assist in requirements definition. Provide input and support for regulatory affairs regarding process or material changes. Support design for manufacturing reviews in cooperation with internal engineers and key vendors. Requirements BS in Mechanical or Manufacturing Engineering (essential), MS desirable. 3-5 years of manufacturing experience, including process development and Manufacturing Engineering, preferably in the medical device industry (essential). Strong working knowledge of process characterization and validation, including tools such as pFMEAs, MVP, IQ/OQ/PQ/PPQ, and TMVs (essential). Understanding of medical device quality regulations, practices, and standards, such as ISO 13485 and FDA quality system regulations (essential). Experience with Design of Experiments or optimization methods (desirable). Experience in logistics and supply chain (desirable). Experience in the synthesis and processing of polymers (desirable). Experience with cleanroom manufacturing and cleanroom installation and setup (desirable).

Skanska is searching for a dynamic Project Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to society and the environment around us. We build in many different verticals. Whether we are building schools to provide inspiring spaces for learning, roads to connect communities, or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values -Be Better Together, Act Ethically and Transparently, Commit to Customer, and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. The Project Engineer works within the Project Management Team which is responsible for planning and overseeing the project to ensure a timely and cost-effective outcome. This includes budgeting, organization, implementation, and scheduling of the project. Ensure the project is constructed in a safe, ethical manner and in compliance with all federal, state, and local laws. The Project Management Team can vary greatly depending on the size and complexity of the projects, which in turn will affect the number of responsibilities the Project Engineer will be involved in. Project Engineer Required Qualifications: 5 years of heavy civil infrastructure industry experience is required. Bachelor of Science in Construction or Engineering or equivalent experience and minimum 5 years prior relevant experience Our Investment in you: We believe that Benefits should connect you to the support you need when it matters most, and should help you care for those who matter most. That's why we provide an array of options (including medical, dental, and vision insurance plans), expert guidance, and always-on tools, that are personalized to meet the needs of your reality - to help support you physically, financially, and emotionally through the big milestones and in your everyday life. Please visit the compensation and Benefits summary on our careers site for more details. As a Skanska community, our values ground us, and our diversity of experience propels us forward. No matter what your career stage, there's a place for you to thrive here and partner with us in shaping how our world lives, moves, and connects. At Skanska, we Care for Life. And we're committed to supporting your whole health and peace of mind through inclusive and personalized total rewards. Career Path Matrix - The Career Path Matrix is a tool for planning your career at Skanska. It brings both the functional/technical skills and leadership skills of your job together in a simple matrix. We're committed to your success by developing you in your role and supporting your career growth Compensation and financial well-being - Competitive base salary, excellent bonus program, 401k, & Employee ownership program. Come work with us and join a winning team! Apply Today for Immediate Consideration! Skanska is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or creed, sex, sexual orientation, gender identity, national origin or citizenship status, disability, status as a protected veteran, or any other protected characteristics under federal, state, or local law. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest development and construction companies. We operate in select markets throughout the Nordics, Europe and the United States. Skanska in the U.S. is headquartered in New York City with 29 offices around the country. In 2022, construction in the U.S. generated $6.9 billion in revenue, and as a developer in the U.S., Skanska has invested a total of $3.5 billion in commercial and multi-family projects. Together with our customers and the collective expertise of our 6,500+ teammates in the U.S. and 28,000+ globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents Search Firm and Employment Agency Disclaimer Search Firm and Employment Agency Disclaimer Skanska USA Human Resources (“Skanska HR”) provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively “Skanska USA”). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor (“Vendor”). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR.

Manufacturing Engineer Pay: $91k to $110k/year (depending on experience) Experience: 3 years of experience as a Manufacturing Engineer or in a similar role, with a strong background in IPC-620 standards and cable/wire harness manufacturing Proven experience in supervising or leading manufacturing teams, including troubleshooting technical issues and ensuring quality standards are met Education: IPC-620 certification preferred Certification in a relevant manufacturing or technical discipline (e.g., soldering, wire harness assembly) Type: Full-time; Direct Hire Schedule: Monday - Friday, 6:30 a.m. to 2:30 p.m. HB Staffing is seeking a Manufacturing Engineer to join a growing and dynamic team! Job Description: Supervise daily manufacturing operations, ensuring production goals are met while maintaining quality in line with IPC-620 standards Oversee and resolve technical issues related to cable and wire harness assemblies, ensuring smooth production and adherence to customer requirements Serve as the primary contact for troubleshooting production issues, providing technical leadership to minimize downtime Ensure production teams follow work instructions, processes, and safety protocols, adhering to IPC-620 standards Monitor quality control processes and conduct periodic audits to ensure compliance with IPC-620 standards Work with quality assurance to identify non-conformances, implement corrective actions, and prevent recurrence Analyze manufacturing processes to identify improvements in efficiency, cost, and product quality Implement and oversee continuous improvement initiatives such as lean manufacturing and workflow optimization Collaborate with design and engineering teams to ensure product designs meet IPC-620 standards and are manufacturable Lead, mentor, and train production staff on IPC-620 standards, best practices, and technical procedures Position Requirements: In-depth knowledge of IPC-620 standards and best practices for cable and wire harness assembly Strong technical troubleshooting skills with the ability to resolve production issues quickly and efficiently Expertise in manufacturing processes, including crimping, soldering, wire stripping, and component assembly Proficiency in using CAD software, ERP systems, and other engineering tools to support manufacturing operations Strong analytical and problem-solving skills, with the ability to implement corrective actions based on root cause analysis Excellent communication skills to effectively lead teams, interact with management, and collaborate cross-functionally HB Staffing is part of Array Corporation, the leading technology-enabled workforce solutions company whose mission is to fix how labor is bought, sold and delivered to enable universal access to the American Dream. We are proud to be an Equal Employment Opportunity and Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.