Engineer Jobs in Hutto, TX

Nemko is an international electro-technical compliance company specializing in testing, inspection and certification services concerning products, machinery, installations, and systems worldwide. We are seeking an Electrical Engineer for EMC Test Engineer position in our Austin, Texas location. You will perform EMC testing to meet overall laboratory needs but knowledge of MIL and Auto is preferred. This includes writing EMC test plans, performing actual hands-on EMC testing, and documenting final results in a formal report in accordance with both domestic and international EMC test standards. Job Responsibilities include but are not limited to: Validate the project scope and sample applicability. Under scope of the project, identify and locate test instruments and equipment required for testing. Follow established test plan. Set-up and operate EUT, perform and document simple repairs on EUT as needed. Perform testing of products in accordance with standards. Engage in problem solving activities to address product failure/non-compliance issues. Develop test methods to comply with both regulatory test standards and customer specifications. This will also include automating these test methods to improve laboratory efficiency and accuracy. Develop and improve laboratory operational procedures and technical procedures to expand our ISO/IEC 17025 accreditation. Following sample handling procedures, ensure that sample is logged into and out of the system, and move equipment as needed through the facility. Communicate project status and test results to client, sales personnel, and management throughout testing. Provide ongoing support to clients as needed. Within policy guidelines, identify, properly document, and recommend engineering judgments. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Ability to make technical decisions and engineering judgments independently within established parameters. Carrying out testing and other activities related to assigned projects according to the Nemko standard of project management. The ability to work within deadlines. A comprehensive knowledge of relevant regulations and the standards. Responsibility to ensure that the work is verified by a verifier. Confident decision-making and the ability to explain ideas and plans clearly. Work according to the current guidelines and requirements for Quality Assurance. Contribute to any actions initiated to create a safe working environment. Use all laboratory equipment in a safe manner and in accordance with Nemko protocols. Work according to the current guidelines and requirements for Quality Assurance as described in Quality Manual, C300-manual and other relevant documentation. Senior Engineers with a segment specialty shall: Contribute/assess project engineers within the Nemko NGV scheme. Tutor and mentor project engineers. Contribute to seminars for knowledge sharing for Nemko and Nemko's customers. Experience: MIL STD DO160, 461 standards experience SAE J1113 standard experience DNVGL-CG-0339 experience EN 60945 experience And any commercial standard experience such as IEC/EN 60601-1-2, IEC/EN 61326-1 3 years directly related professional experience preferred Experience with U.S., Canadian, and International standards a plus Work experience in an ISO/IEC 17025 accredited laboratory is preferable Knowledge, Skills, and Abilities: Excellent verbal and written communication skills Excellent organization and time management skills Excellent customer service skills Must be self-motivated and able to work independently in a fast-paced, multi-tasking environment Thorough understanding of test standards (both domestic and international) Strong problem-solving skills Strong computer skills (Microsoft Office) *This job may require lifting, pushing, pulling of heavy objects EDUCATION: Post-secondary degree/diploma in electrical engineering or equivalent plus directly related work history in a compliance testing environment.

It's a great time to join a fast-paced, exciting leader in data acquisition and power analysis. We're looking for an energetic, results-driven Sales Development Engineer to grow our business. As a Sales Development Engineer, you will be the first point of contact for potential customers, playing a critical role in building our sales pipeline. You will identify new business opportunities, generate qualified leads, and collaborate with internal teams to ensure smooth transitions through the sales funnel. The ideal candidate will have a passion for technology, outstanding communication skills, and a desire to grow within a fast-paced environment. The Sales Development Engineer will cover the Western half of the US and closely collaborate with the customer service, marketing and regional sales teams to build and maintain a healthy sales pipeline enabling expansive growth. Initial product and market training will be provided and continuous employee development programs are in pace. This is an early career position and we are looking for a candidate who brings the right attitude, energy and tools to grow with our company. The position is based at our regional office in Austin, Texas and may require occasional travel. Tasks and Responsibilities: Lead Generation & Prospecting: Identify potential customers across industries including automotive, aerospace, energy, and industrial. Research accounts, identify key prospects, develop and execute target outreach programs. Use multiple channels (emails, social media, cold calling, etc.) to initiate contact with key decision-makers and build trust by sharing technical knowledge. Pipeline Development: Qualify leads and determine fit by gathering relevant technical and business information. Set appointments and hand off qualified leads to the sales team Maintain accurate records of outreach and progress within the CRM system (Salesforce). Collaboration & Communication: Work closely with marketing on lead-generation campaigns and follow-up strategies. Collaborate with sales managers to develop effective strategies for specific markets and accounts. Assist customers and the sales team with preparation of technical proposals and quotations. Attend industry events, webinars, or conferences to expand market knowledge and relationships. Performance Monitoring & Improvement: Meet or exceed monthly lead targets and pipeline goals. Continuously refine outreach strategies based on feedback and sales performance data. Stay updated on product offerings, industry trends, and customer pain points. The Ideal Candidate Qualifications: Education: Bachelor's degree in Engineering (EE, ME) or a related field (or equivalent work experience). Experience: 1-3 years of experience in sales, lead generation, or customer-facing roles, preferably in the technology, instrumentation, or power systems industry. Technical Aptitude: Ability to quickly understand and communicate the benefits of complex power measurement products. CRM Expertise: Familiarity with customer relationship management platforms (preferably Salesforce). Communication Skills: Excellent written and verbal communication, with the ability to connect with stakeholders at all levels. Presentation Skills: Ability to create and deliver presentations tailored to the customers' needs. IT Technology & Office: Excellent knowledge of MS Office tools and willingness to work in an office environment Proactive & Goal-Oriented: Self-motivated with a track record of meeting or exceeding KPIs. Team Player: Ability to work effectively in cross-functional teams with marketing, sales, and product specialists. Preferred Skills: Experience in industries such as automotive, energy, aerospace or industrial automation. Familiarity with power analyzers or other precision measurement instruments. Knowledge of B2B sales cycles. Experience working with international collaborators (customers or colleagues) Benefits: Medical, Dental, Vision and short-term disability insurances fully paid by company. 401(k) Plan (after 90 days of employment) 4 weeks PTO from day one. 10 paid U.S. federal holidays. Sponsorship: Candidates must be legally authorized to work in the Unites States on a full-time basis and will not now nor in the future require sponsorship for employment visa.

Customer Support Engineer with knowledge in LCD devices wanted. The successful candidate will be comfortable with frequent business travel in Houston and Louisville to meet with clients and oversee regional CS operations. Qualifications: 1. 2 years+ of technical engineering and troubleshooting experience in LCD devices; 2. Ability to quickly solve problems of LCD devices; 3. Ability to travel as needed for business meetings and client engagements.

As a Machine Learning Engineer at [Netbounce Global], you will work on designing, developing, and deploying machine learning models and systems to solve complex real-world problems. You will collaborate closely with data scientists, software engineers, and product managers to build robust, scalable, and efficient ML solutions. Key Responsibilities: Develop and implement machine learning models and algorithms for various applications, such as predictive analytics, natural language processing, and computer vision. Analyze large datasets to derive actionable insights and build data-driven solutions. Collaborate with cross-functional teams to integrate machine learning models into production environments. Optimize machine learning algorithms for speed, accuracy, and scalability. Conduct performance evaluations and fine-tuning of models to ensure they meet business objectives. Keep up to date with the latest developments in machine learning, AI, and related technologies, and integrate these innovations into the team's workflow. Provide mentorship and guidance to junior engineers and team members. Write clean, maintainable, and efficient code while following industry best practices. Required Qualifications: Master's degree in Computer Science, Data Science, Statistics, Engineering, or a related field. Proven experience (0-4 years) working as a Machine Learning Engineer or in a similar role. Strong proficiency in programming languages such as Python, R, or Java. Experience with machine learning frameworks and libraries such as TensorFlow, PyTorch, Scikit-learn, or Keras. Solid understanding of machine learning concepts including supervised/unsupervised learning, deep learning, and reinforcement learning. Strong knowledge of algorithms, data structures, and software engineering best practices. Experience with data wrangling, preprocessing, and feature engineering. Familiarity with cloud computing platforms (AWS, GCP, Azure) for ML model deployment. Knowledge of SQL and experience working with large datasets. Experience with version control systems (e.g., Git). Preferred Qualifications: Masters in Computer Science, Artificial Intelligence, or a related field. Experience with deploying machine learning models in a production environment. Knowledge of containerization technologies such as Docker and Kubernetes. Familiarity with big data technologies such as Hadoop, Spark, or Kafka. Strong analytical, problem-solving, and communication skills. Benefits: Competitive salary and performance-based bonuses. Health, dental, and vision insurance. 401(k) with company matching. Generous paid time off and holiday schedule. Opportunities for professional development and continuing education. Collaborative and dynamic work environment.

🌟 Machine Learning Engineer (Computer Vision) 📍 Location: Austin, TX 🕒 Type: Full-Time 🤠 Howdy, we're Frontiers Market!We're an Austin startup obsessed with improving the lives of ranchers by giving them access to cutting-edge AI solutions. We're looking for an enthusiastic Machine Learning Engineer to join our team, help us innovate, and build exceptional computer vision products for the AgTech industry. 🎯 What You'll Be Doin' Assist in building and maintaining robust deep learning pipelines. Support dataset creation, annotation, and validation processes. Train and fine-tune deep learning models for visual perception tasks. Prototype, test, and validate computer vision algorithms on real-world datasets. Collaborate closely with senior engineers and cross-functional teams to integrate computer vision solutions into our products. Help monitor deployed models and contribute to their improvement and scalability. Identify and troubleshoot issues in development and production environments. Stay updated on the latest ML tools, technologies, and best practices. 🛠 Requirements Master's degree in computer science, computer vision, data science, or a related field. 1-2 years of relevant experience or strong internship/project background in machine learning, particularly computer vision. Proficiency in Python, with familiarity in libraries such as OpenCV, TensorFlow, or PyTorch. Understanding of modern deep learning frameworks (CNNs, YOLO, Vision Transformers). Experience with managing datasets, including annotation and preprocessing. Good problem-solving skills and eagerness to learn in a fast-paced startup environment. 🌟 Nice-to-Haves Familiarity with workflow orchestration frameworks (KubeFlow, Airflow, Dagster). Exposure to cloud platforms like AWS, GCP, or Azure. Interest or prior experience in agtech, farming, or online marketplaces. Experience working in startup environments or entrepreneurial projects. 🎉 Perks Competitive salary and equity. Flexible working hours. Opportunity to directly impact and improve the lives of ranchers. 🤝 Let's Get to Work If you're eager to learn, passionate about AI, and ready to make a meaningful impact, saddle up and join the Frontiers Market team! To apply, please send your resume and a link to any relevant projects or portfolio to ******************************. We're excited to see how you'll contribute to our vision! 🐮🎉

Title: Applications Engineer - Metals - Temporary Role Reports to: Applications Manager - Metals Temporary Role - 60 Day Term Do you have a passion for additive manufacturing? Would you like to test and implement cutting-edge AM technologies? As a member of the Additive Minds Team, you would advise and support EOS customers in the successful implementation of additive manufacturing technologies into their organization. Your Mission: Act as the metal laser powder bed fusion (LPBF) additive manufacturing subject matter expert in internal and external development projects to solve complex manufacturing problems across a wide variety of industries. Meet with EOS customers to understand their AM adoption needs. Define the scope, create a plan, and execute the engineering work required to produce functionally tested AM parts that enable their adoption and production. Learn and utilize deep process knowledge to print a wide variety of geometry types in a wide variety of materials. Work as a hands-on member of our AM facility to ensure the delivery of high-quality and on-time parts for your own projects. When needed, operate EOS metals equipment and maintain and improve our internal manufacturing processes. Define and oversee post processing operations on additive parts such as de-powdering, heat treatment, wire EDM cuts, and machining operations. Represent EOS at customer visits, trade shows, and conferences. Your Talents: Bachelor's degree in a related engineering field (e.g. mechanical, aerospace, manufacturing, materials engineering) or significant familiarity and work experience with metal LPBF. Minimum of 1-3 years of experience in metal LPBF additive manufacturing. Sound knowledge and business application of project management practices, techniques, and core principles. PMP certification a plus. Very comfortable with the hands-on skills required in a manufacturing environment. Ability to lift 25lbs regularly, wear a respirator, and be on your feet throughout the day. Familiarity with machining and other conventional manufacturing processes. Software skills including CAD modeling, LPBF support generation (Magics, 3DXpert), FEA, and CAM. Ability to work on ITAR and export-controlled projects. Fluent written and spoken English language skills. Willingness to travel on occasion, for business purposes. Our Vision Over 1000 sharp minds, about 60 nationalities, one goal: accelerating the world's transition to Responsible Manufacturing. Our proven technology, industrial 3D printing, has been extending the boundaries of manufacturing for over 30 years. We work globally networked and prefer to think outside the box - and we're looking for people who want to shape the future with us. EOS welcomes individuals from all backgrounds, ensuring equal opportunities without regard to race, color, religion, national origin, gender identity, expression, sexual orientation, age, or disability. At EOS, equity and inclusion are fundamental principles, and we believe in creating a work environment that is built on empathy, respect, and fairness.

Job title: FPGA Design Engineer Annual Salary: $120,000 - $165,000 per annum & Job Title: An exciting and growing engineering organisation located in Austin (Texas, USA) who work across leading industries for Autonomous Vehicles, Robotics, Drones, and beyond are seeking to hire a new FPGA Design Engineer to join the highly innovative team and business on a permanent basis. Salary on offer & the right to work in the USA : The annual salary on offer for the successful FPGA Design Engineer is $120,000 - $165,000 per annum, depending on skillset and experience. The FPGA Design Engineer must be legally authorized to work in the United States. Summary of the FPGA Design Engineering Role: The successful FPGA Design Engineer will take responsibility to be developing designs on the new & latest creations of FPGAs, working alongside the talented Electronics Hardware and Embedded Software Engineers. FPGA Design Engineer Key Skills: 5-7+ industry professional experience FPGA design experience (RTL, simulation, synthesis tools, implementation, bring-up, and debug) RTL design with coding experience in VHDL or Verilog Strong knowledge and experience of high digital design Experience with FPGA development tools - Xilinx Vivado, Quartus Prime, Altera, Intel Quartus, Lattice Demonstrated experience implementing DSP algorithms on FPGAs Network interfaces - SPI, I2C, USB, UART, RS232/485, PCIe, JESD204B/C, MIPI Experience with FPGA simulations (ModelSim/QuestaSim preferred) Experience with formal verification and timing analysis Bonus nice to have skills: Industry experience - Autonomous Vehicles, Robotics, Drones Experience with Embedded C, C++, MATLAB Scripting - Python Perl, TCL Ethernet/packet processing experience or knowledge. Understanding of SoC architectures Benefits Package: 401K retirement plan Equity Paid time off, paid holidays Maternity and paternity leave Health, dental, and eye-care insurance Access to Employee Assistance Program Employee discounts and perks program And many more If you are interested in the above exciting FPGA Design Engineering postion and think you have the right skills required to join the successful company and to progress well, please don't hesitate to apply and contact Frank Kanjanda on ******************* or call *************** for more information.

One of the US's most exciting scale-ups are looking for a Lead Bring-up/Validation Engineer to join their RISC-V development team. With an existing team made up of the world's best engineering talent, you will be joining a true industry-leader, at a moment of real growth. You will lead an elite team in the design, implementation, and bring-up of a PCIe silicon subsystem, and take charge of the validation thereof. Required Skills: 5+ years of relevant experience Expertise in architecture, performance (or power), and software of PCIe subsystems Proficiency in C/C++ and Python. Experience in verification: Verilog, emulation etc. Experience in silicon debugging (logic/software/physical) Excellent teamwork, and passion for a dynamic and fast-paced culture PhD, Master's Degree or Bachelor's Degree in a relevant field Interviews are now being scheduled, so apply now with a resume below.

Scope: Setup, execute and maintain test fixtures Deploy hardware test fixtures per Automation Engineer's instructions including mechanical setup and device under test setup. Ensure daily tests run correctly, debugging issues when they arise and running experiments as defined. Skills Familiarity in Python-based test automation, interacting with custom hardware interfaces such as microcontrollers and various I/O devices Experience deploying automated fixtures including mechanical setup Experience with infrastructure and configuration management systems (ansible, puppet, etc) Experience with shell scripting, networking and managing mac OS systems Detail oriented with ability to adjust to a fast-paced Good-to-have Familiarity with Python frameworks and test development Familiarity with Apple Products and Ecosystem Experience with 3D printing, soldering and similar tools Thanks & Regards Shaikh Mujahed Desk: ************ Mail: ***********************

Project Engineer-Drainage Engineer Austin, TX (can be located in Dallas and RoundRock as well) Direct hire $90,000-$130,000 Qualifications: Bachelor's degree in Civil Engineering or Environmental Engineering Licensed Professional Engineer (PE) in Texas Preferred 5+ years of experience working on drainage-related projects Experience using HEC-HMS, HEC-RAS (steady, unsteady flow, and two-dimensional), ORD DU, and/or other drainage analysis software Preferred CFM certification Floodplain mapping experience is a plus Excellent written and verbal skills Must have Texas Drainage experience Responsibilities: Coordinate the efforts in preparing contract drainage drawings, specifications, and estimates while also overseeing the creation of project-specific drainage/hydraulic reports and technical documentation Conduct cross-drainage hydraulic analysis and design Conduct drainage analysis and design per the requirements of the project and transportation public agencies such as TxDOT Preparation and review of FEMA CLOMR and LOMRs Preparation of storm sewer, cross drainage, and floodplain models using Open Roads Designer (ORD), ORD Drainage and Utilities (ORD DU), HY-8, HEC-RAS, and HEC-HMS

As a Lead Product Engineer at LTSCT, you own the product engineering and will interface with design, foundry, test, reliability, OSAT and FA to debug and solve product/process related issues in pre-production and production phases. You will be responsible for process improvements to reduce production costs and increase yields. Product Engineer will manage new product introduction and production support engineering for a specific product or group of products after they have been transferred from design to fabrication until production. Responsibilities include: Coordinate with all internal stakeholders for product design, package design, fabrication, package assembly, test and qualification for enabling the product for volume manufacturing Active involvement in pre-silicon test program, hardware development and post silicon stage for timely delivery of product at the target cost, quality and target volume. Define the Risk Assessment and Mitigation plan in every critical stage of the project using FMEA Point of contact for all the issue resolution during the whole project cycle within LTSCT team and partners. Drive technically the teams responsible for product releases, Fab & OSAT partners for high volume manufacturing on ATE platform for Automotive, Industrial and Energy products. Perform vigorous signoff for new test systems (program/hardware) per manufacturing requirements. Perform the correlation study, analysis and release of Test program for manufacturing. Support daily production issues at test floor for wafer probe and Final Package Test. This includes low yield analysis and disposition, setup failure debug/analysis and resolution (both hardware and software). Provide detailed analytical study on above issues in collaboration with design, process, reliability, test to narrow down root cause and solve product issues in terms of yield, stability and quality. Engage in productivity improvement projects, including yield improvement, test time reduction, test insertion removal etc. Develop and own yield roadmap, dashboards, and reports to track yield performance and provide insights to stakeholders. Provide support for IC Reliability, Online Reliability Monitoring, Failure Analysis and RMA Handling. Lead and support introduction of new tool/equipment/test processes to manufacturing for new product releases, leading the entire qualification and change management approval. Engage & manage OSAT in early production stage. Your Profile You are best equipped for this task if you have: Bachelor's or Master's degree in Electrical and Electronic Engineering with preferred more than 10 years of relevant experience in Semiconductor Industry. Good understanding of the complete life cycle of Semiconductor IC development and production Proven expertise with process technology, knowledge of WAT, WS, CP, Final Test data analysis and correlation with Test Yield. Strong background on yield detractor root causes by product design margin, fab manufacturing excursions or variation, test margin/instability & operational inefficiency. Knowledge of semiconductor device physics, Analog/Mixed signal and Digital test concepts, ATE Test program, Device characterization and Test debug. Knowledge of FMEA derived Semiconductor IC Product Qualification Plan (JEDEC/AECQ-100/101), IC Reliability, Failure Analysis and RMA Handling. Knowledge on DFT, DFM, DFR and DFFA Familiarity with industry-standard yield analysis tools, such as PDF Exensio, JMP, Spotfire etc. and in generating reports with a data driven approach. Good knowledge of general semiconductor industry process quality control system and statistical analysis methodology: SPC charts review, Cp, Cpk improvement, GR&R etc. Excellent analytical, problem-solving, and communication skills, with the ability to work effectively in a cross-functional team environment. Leadership skills with a track record of managing multi-disciplinary and multi-cultural teams. Candidates with experience in cross-functional collaboration and exposure to international teams is a must Knowledge of machine learning or artificial intelligence techniques applied to yield enhancement is a plus. Independent, resourceful and takes initiative. Good Command of English.

In this role, you will be working on timing sign-off of CPU designs based on latest architectures in the most advanced nodes. Mobile CPU's demand highest performance at optimal power efficiency on a wide voltage range. The product requirements offer ample design challenges to innovate and deliver a differentiated CPU design. Responsibilities include but are not limited to Responsible for high performance CPU STA sign-off, power recovery, and timing closure. Perform block level STA environment setup including constraints development, STA regression execution, and timing, power eco generation. Work closely with RTL/DFT teams to define timing constraints for functional and DFT modes. Participate in world-wide STA forum and contribute to defining leading edge STA margin methodologies. Responsible for delivering timing models (ETM, Hyperscale) and timing deliverables (SDC, timing budgets), and support successful integration at SOC level. Job requirements 5+ years of hands on experience in STA of high performance CPU design with frequencies > 2 Ghz. Experienced in hierarchical design, budgeting, multiple voltage domains and multiple clock domains. Solid understanding of multi-scenario STA and timing constraints. Excellent understanding of margining methodologies (OCV/AOCV/POCV) to address process variation, correlation to spice, silicon. Experience with design closure across a wide range of operating points (multi-OPP), addressing setup-hold conflicts due to transistor/wire scaling. Experience with clock tree analysis and drive physical implementation to achieve a scalable clock tree implementation for smooth timing convergence. Experience with custom recipe development for timing closure and power recovery in sign-off tool environment to achieve best in class power efficient high performance CPU. Knowledge of low-power techniques, familiarity with multi-voltage island design specification (CPF/UPF). Strong skills with Cadence and Synopsys timing sign-off flows. Strong scripting skills in tcl, perl, or python. Experienced in working on advanced process nodes (7nm) Plus ARM CPU STA experience Familiarity with implementation flows (synthesis, place and route, physical verification) IR Drop analysis (Static & Dynamic)

As an AI platform Engineer: you will be working for NXP's Global design community with the primarily focus of boosting circuit design and SW development (lower time-to-market, higher quality) using advanced AI / ML tools. You will implement robust, scalable AI systems and infrastructure, including data storage, processing, and model serving components, to support seamless integration of AI models into NXP's large scale design environments. You will develop novel feature engineering, data augmentation, prompt engineering and fine-tuning frameworks that achieve optimal performance on specific tasks and domains. You will use expertise in developing and operating technical platforms to enable our engineers to work more efficiently and adopting your platform through direct engagement. You work hands-on, and are able to tackle the whole design, build, test, deploy cycle. You will be part of a cross-functional global team that provides AI systems, platform and services to internal customers. You are well-versed in cloud engineering and development, with a strong DevSecOps mindset, and thanks to your excellent collaboration skills you will work with your team to deliver the best answers to our customers' needs and to take over full responsibility for its platform, from design to operation. You care diligently about the quality of your work, including proper documentation and security aspects. You care for operational readiness, ensure observability of your platform and service. You will continuously improve CI/CD and automation maturity and efficiency. Candidate requirements: Minimum qualifications: Bachelor's or Graduate degree in computer science, electronics, information technology or related field. Minimum of 12 (twelve) years of demonstrable hands-on experience working as software solutions developer/architect with experience in EDA software optimization Extensive hands-on experience in software development (CI/CD), including SCM (one or more of git/svn/bitbucket/perforce), release management, testing and documentation. Experience with AWS services such as ECS Fargate, Lambdas, AWS IAM, AWS CDK. Proven experience designing AI/ML solutions for scientific computing, specific to EDA/Silicon design. Experience using AI prompts, RAG based patterns, Langchain, vector databases Deep experience in Engineering DRM (eg. LSF, Univa, Slurm, RTDA) based workflow implementation or optimization. Experience with data engineering and data security - including databases, data lakes/data lakehouses. Have the technical skill to review, verify and validate the software code developed in the project. Strong leadership and communication skills, with the ability to collaborate effectively across teams. Excellent analytical and problem-solving abilities with a focus on proactive optimization. Soft Skills: Customer-centric mindset with a strong focus on delivering exceptional service. You are able to verbalize your thoughts and ideas and take the initiative to translate ideas into outcomes. Logical thinking and advanced problem-solving skills, with a proven ability to analyze complex issues. Team-oriented approach, with a willingness to work collaboratively with cross-functional teams to achieve goals. Proven experience working in a global environment handling international clients considered a significant asset.

Role: Manufacturing Supplier Engineer Duration: 12+ months Job Description:' Supplier Engineer responsible for managing overall supplier manufacturing, operation issue across supplier base, ensuring process controls are established and ensure throughout the suppliers entire manufacturing process. Responsibilities: Involve in Supplier Issue Resolution Work on Corrective Actions Implementation, Collaborate w/ cross functional team during issue resolution, Develop & Propose supplier Improvement Plan Proliferate Key learnings & Document into BKM wherever applicable Assist in the supplier technical audit process and evaluate supplier performance / capability, drive continuous improvement opportunities at supplier. Mechanical Engineering or equivalent w/ min 4-5 years in Supplier Development / Supplier Quality role Understanding of Mechanical Parts & Assemblies, ability to read / Interpret drawing Good understanding on various manufacturing process & dependencies Hands-on with problem solving methodologies, efficient in 8D, CAPA etc. Understanding on vacuum and associated components will be added advantage Efficiency in written & Oral communication? Good working level exposure on MS Excel, PowerPoint

Hourly Pay Rate Range - $45.00 to $55.00/HR (Depending on working experience) Note:- This is not junior or Entry Level not a QA Valuation role candidate must have 4+ years of industry experience as Validation Engineer The Role: The Client Server Hardware Team is seeking an experienced engineer to support our lab infrastructure which is required to enable silicon focused development and debug activity. You will work with our hardware team to define, plan, and execute our lab infrastructure plans. Additionally, you will also be responsible for assisting engineers with board reworks, debug, test, and support users of our designs. KEY RESPONSIBILITIES: • Create and execute functional and electrical test plans using hardware & software validation tools, oscilloscopes, & logic analyzers • Document test plan results and generate timely results/reports • Provide debug, applications support, and design assistance to engineers • Provide hand-on technical assistance in the lab • Provide board rework support IDEAL CANDIDATE WILL HAVE: • A technology related diploma/degree and at least 7 years or equivalent combination of training and experience • Experience maintaining server system hardware and installing/configuring server software in Linux/Windows environments • Experience with engineering lab equipment, soldering irons, PCB hot air tools, oscilloscopes, signal generators, DC power supplies, etc. • Experience reading and navigating platform schematics and layout documents • Excellent written and verbal communication skills • Strong skills handling and debugging hardware are a must • Knowledge of Python is a bonus EDUCATION: • Minimum Requirement: A 2-year degree in electronics or a related field • Preferred: Bachelor's degree, but significant experience can compensate for the lack of a 4-year degree Employee Benefits: At LanceSoft, full time regular employees who work a minimum of 30 hours a week or more are entitled to the following benefits: Four options of medical Insurance Dental and Vision Insurance 401k Contributions Critical Illness Insurance Voluntary Permanent Life Insurance Accident Insurance Other Employee Perks About LanceSoft LanceSoft is rated as one of the largest staffing firms in the US by SIA. Our mission is to establish global cross-culture human connections that further the careers of our employees and strengthen the businesses of our clients. We are driven to use the power of our global network to connect businesses with the right people, and people with the right businesses without bias. We provide Global Workforce Solutions with a human touch. EEO Employer LanceSoft is a certified Minority Business Enterprise (MBE) and an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. LanceSoft makes hiring decisions based solely on qualifications, merit, and business needs at the time. Want to read more about LanceSoft? Click here to visit our website - *****************

Skybeck Construction is looking for competitive and resourceful individuals who thrive in a fast-paced environment that demands precision and attention to detail. This position will provide challenging opportunities to grow individually with an experienced construction team. As an industry leader in Multifamily Construction, Skybeck is driven by our passion for delivering best in class projects. Our team members are committed to doing things the right way and we honor that responsibility with a culture that rewards success. Job Summary: The Project Engineer will support the Project Managers and Assistant Project Managers in ensuring the timely and quality delivery of work for assigned construction projects. Responsibilities: Demonstrate Skybeck's Core Values - WE ARE Coordinate with all Owner requirements as it relates to reports and inspections. Review product submittals and ensure that approved materials are being installed properly in the field. Update all as-built documents with approved field changes, addendums, RFI's or design sketches. Perform quality control and manage the punch list process. Trouble shoot design discrepancies and assist with RFI's. Assist with preparing daily reports and daily photos. Maintain project documentation including daily reports with project photographs and as-built documentation. Assist with building inspections. Assist in ordering materials and scheduling deliveries. Assist in the oversight and coordination of all subcontractors. Qualifications: Ability to follow up on inquiries in a timely manner. Ability to build relationships and collaborate within a team. Strong verbal and written communication skills. Proficient with Microsoft Office Suite. Education and Experience: Bachelor's degree in Construction Engineering or related field. 0-3 years' experience in the construction industry (preferably Commercial, Multi-family, or Hospitality) Physical Requirements: Ability to lift to 25 pounds. Ability to travel to and from meetings, trainings, or other business-related events. Skybeck is an equal opportunity employer and is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, genetic information, or any other characteristic protected by law. In addition to federal law requirements, Skybeck complies with applicable state and local laws governing nondiscrimination in employment.

We are seeking an experienced and highly skilled Block-Level Design Engineer to join our innovative team. The ideal candidate will excel in RTL-to-GDSII design processes and demonstrate expertise in advanced implementation tools and techniques. This role offers an opportunity to work on cutting-edge designs for lower nodes (3nm, 4nm, 5nm). Key Responsibilities: Perform block-level design from RTL-to-GDSII. Handle synthesis, floor-planning, place & route, timing/EMIR/PV closure, and signoff. Utilize the Cadence Implementation tool suite (Genus, Innovus) proficiently. Implement controllers for High-Speed IO IPs. Conduct structural implementation, including datapaths, bus planning, and routing. Design with multi-power domains. Develop and maintain scripts using TCL and Python. Requirements: Proficiency with Cadence Implementation tool suite (Genus, Innovus). Experience in structural implementation of datapaths, bus planning, and routing. Strong scripting skills in TCL and Python. Familiarity with multi-power domain design. Experience with controllers for High-Speed IO IPs. Knowledge of lower-node technologies (3nm, 4nm, 5nm) is a strong advantage.

Are you passionate about delivering excellence and making a real impact? Do you thrive on applying sharp analytical skills, innovative thinking, and technical expertise to meaningful challenges? If so, we invite you to explore an exciting opportunity with us. VISIE is a dynamic medical device startup in Austin, Texas, pioneering a computer vision platform that redefines surgical navigation and robotics. Our technology integrates real-time, pinpoint-accurate 3D surface measurements into clinical workflows, enhancing how preoperative CT and MRI data are used during surgery for greater precision and decision-making. Join our close-knit team of experts and help shape the future of the digital operating room, improving outcomes for millions of patients worldwide. **To apply, send your resume and cover letter to *************************** What You Will Be Doing · System Ownership: Own the system-level architecture from initial requirements through final validation, ensuring all components (hardware, software, mechanics) align to clinical and regulatory needs. · Requirements Definition: Develop and maintain complete system requirements, including functional, performance, safety, and usability specifications. · Risk Management: Lead risk analysis (ISO 14971) activities for the integrated product, working collaboratively across disciplines to anticipate and mitigate risks. · System Performance Requirements: Define and validate system-level requirements for latency, data throughput, and real-time behavior, ensuring alignment across hardware, firmware, and software teams. · Validation & Verification Planning: Write, review, and execute test protocols that demonstrate the system meets clinical and technical requirements. · Design Controls & Compliance: Maintain traceability of requirements, risk analyses, and verification evidence in accordance with ISO 13485 design controls. · Cross-Functional Collaboration: Act as a bridge between software, hardware, integration, and mechanical teams to ensure coherent system behavior. · Customer & Demo Engagement: Support customer-facing demos, cadaver labs, and early user evaluations to validate system performance and usability. Required Skills, Education, and Experience · Education: Bachelor's or master's degree in Mechanical, Electrical, Systems, Biomedical, or a related engineering field. · System Engineering Skills: 3+ years working on cross-disciplinary systems involving hardware, software, and mechanical integration. · Medical Device Experience: Familiarity with ISO 13485, ISO 14971, and design control practices. · Requirements & Risk Management: Skilled at authoring and managing requirements and performing risk analyses. · Validation and Verification: Experience planning and executing system-level V&V activities. · Strong Communication: Ability to work across teams, translate technical needs into system requirements, and clearly document complex decisions. Ways to Stand Out · Familiarity with Real-Time Systems: Understanding of embedded hardware/software interaction, DMA-based data flows, and performance optimization considerations is a plus. · Medical Robotics or Surgical Navigation: Experience with surgical robotics, navigation systems, or medical imaging. · Startup Experience: Comfortable working in a fast-paced environment with evolving priorities. · Hands-On System Testing: Direct experience supporting lab tests, system troubleshooting, or customer demos.

Hybrid Taylor, TX Duration: 24 months **MUST BE LOCAL TO TAYLOR, TEXAS PLEASE NOTE C2C IS NOT AVAILABLE Provides backfill support for modeling. Facilitates Senior Modelers having more bandwidth to address questions and coordination of CIM 16 Upgrade Project. JOB DUTIES Model Development Develop operations models from the Network Model Management System (NMMS) Works with the Network Data Support Working Group (NDSWG) members on operational model data exchange and transmission network model maintenance in NMMS Develops steady state and geomagnetic disturbance models with the Steady State Working Group (SSWG) using Model On Demand (MOD) and PSS/E Develops short circuit models with the System Protection Working Group (SPWG) using ASPEN Oneliner Coordinates the model and contingency building processes for SSWG and SPWG, ensuring transmission service providers (TSPs) submit data, validates data submissions, resolves modeling issues, performs generation modeling and dispatching, and produces data products for the planning models Works with the SPWG and SSWG on data exchange methods and transmission network model maintenance methodologies Generation Modeling Reviews generator and transmission equipment data submitted by resource entities and works with resource entities to correct invalid model data Models transmission generation sites and distributed generation resources in the company planning models using PSS/E and ASPEN Maintains and develops generation modeling tools written in Java and Python Modeling Application Support Manages transmission system model software infrastructure and develops tools to assist in managing transmission models which includes database infrastructure, model data exchange interfaces, and data export formats Develops and maintains modeling software tools in Java, to validate transmission network data submissions using electrical engineering principles by doing data comparison and validity checks Develop rules to validate data submissions in operations and planning models using SQL Manage projects to upgrade the NMMS and MOD applications to implement desired new functionality, reviews system patches, and help administer servers Other Responsibilities Provides training and mentoring of members of the Engineering Development Program (EDP) Works closely with Network Model Maintenance, Network Model Coordination, Resource Integration, System Operations, System Planning, Forward Markets, Client Services, and Grid Applications Development Reviews, drafts, and presents changes to the Protocols, Guides, procedures, training material for EDP and for Market Participants (MPs), and other supporting company documents relative to modeling Reviews changes to NERC standards to assess if changes to modeling methodologies are needed QUALIFICATIONS: EDUCATION Bachelor's degree in Electrical Engineering or related field, or a combination of education and experience that provides the applicant with knowledge equivalent to a major in such fields. SKILLS Has experience with at least one of the following programming languages or equivalent: Python, Java, C# Has experience with at least one of the following power system simulators or equivalent: PowerWorld, PSS/E, ASPEN Oneliner Experience with SQL is preferred but not required Experience with software tools like Git/BitBucket and Jira is preferred but not required Strong communication skills and the ability to work effectively in cross discipline teams WORK EXPERIENCE Minimum 1 to 2 years (in excess of degree requirements stated above) of progressively responsible experience as a power system engineer or similar type role. Experience within the electric utility industry preferred. WORK LOCATION: Employees may be required to be on-site at least twice per week, or more as needed based on business needs in Taylor, TX. Work arrangements are subject to business needs and are subject to change accordingly. Employees that are required on-site during tight grid conditions or emergency grid operations MWResource does not discriminate based on race, gender, color, religion, national origin, age, disability, veteran status, or anything else that makes you part of any group. MWResource offers medical, dental and vision coverage through Capital Blue Cross, short- and long-term disability coverage, employer paid life insurance, and participation in the MWResource 401K plan for US based consultants. Candidates must be authorized to work in the United States. Candidates will be required to pass a background check and drug screening. Please note we are not open to outsourcing our recruitment needs.