Engineer Jobs in Billings, MT

We are deploying infrastructure for 5G Networks. A telecommunications startup focused on efficient and strategic support to the nationwide 5G deployment, helping OEMs and operators achieve enhanced connectivity for their networks. The field integration technician will be responsible for New and existing Technologies integrations to the network. LTE & 5G Integrations as per site requirements and work with the construction crew on site to complete the job scope. Installation may also be required alongside commissioning and integration tasks. Responsibilities The work involves installing, configuring and later integrating new LTE equipment from Nokia (as well as de-commissioning and removing old equipment from the site). You will be part of a growing team, coordinate tasks with integration engineers, and perform related tasks. A qualified candidate will have 1-2 or more years of experience with working at telecommunications sites (i.e, BTS/radio installation, fiber, telco, light electrical, etc). Experience with Installation, commissioning and integration of Nokia LTE & 5G equipment. Must have experience with Nokia BTS manager. Experience with T-Mobile Equipment is preferred. Experience with NSN Multi-Flexi System & Airscale modules and radios. Commissioning & Integration of UMTS, GSM, LTE and NR radio technologies. Installations Circuit Breakers, GPS Kit, LAN Connections, CPRI Fibers. Understanding of IP and Routing of cables. Mounting/unmounting of cabinet, racks and hardware. Experience with using a Fiber scope. Theory and application related to project management, radio access networks, backhaul to sites signaling, disaster recovery planning and response, data services and location-based services. Excellent computer skills. Specifically, please contact us if you have a PTID and have removed or installed Nokia LTE & 5G equipment - and especially if that work involved installation and/or commissioning of Nokia equipment. We also expect that you have your own vehicle, a basic set of tools for work on wireless sites, laptop, cell phone, and ability to work outside. Requirements Associates Degree in Electronics and Communication Engineering or related field preferred. High School diploma and equivalent related experience considered. NOKIA Certifications. Ability to represent company with professionalism. Ability to work within Maintenance Window hours (midnight to 6am) or daytime as scheduled based on project scope and adhere reliably to schedule. Ability to travel within a region, market or out of market on a project basis. Comfortable working outdoors in all types of weather throughout the year. Ability to use technical skills to work independently and within a team and execute responsibilities as well as solve problems. Ability to lift 50 lbs and climb a 12 ft ladder. Computer and MS Office Proficient. Valid driver's license. Basic Hand Tools CED Systems is an equal opportunity employer. CED Systems prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, national origin, age, disability or genetic information. Benefits Team Member Discount Program Referral Program Certification Training and Assistance

Job Details Billings, MT Full Time High School/GED Up to 10% Utilities Description CEC is an innovative specialty services trade provider that is committed to its employees and their career growth. With the rapid expansion of our company, we need passionate and motivated individuals to join our team. Position Summary This position uses a variety of technical and practical knowledge to assist operations in implementing the best installation method for telecommunication infrastructure. This is a Safety Sensitive position. Essential Duties and Responsibilities Assigned tasks relating to job site work are maintained in an organized and clean manner. Locate, sketch, and document detail information of OSP facilities: cables, poles, ground structures, terminals, manholes, and equipment. Assigned tasks are regularly completed within the budgeted time & performed to meet or exceed quality standards established. Acquire the necessary field information, record verifications, document preparation, required to prepare work order construction prints. Take detailed, measurements, notes, and photos of the proposed telecommunications network construction locations, cable routes, and equipment site. Provide feedback to facilitate improvements to the installation process. Complete field surveys, ROW (right of way) drawings, asset documentation, etc. to determine best routes for construction. Document project changes and communicate back to project management, provide all documents at close of project. Perform tasks such as walkouts, inspections, testing, etc. as required. Collect pole data for attachments and/or pole loading as required. Perform any research as requested by the company/customer. Adhere strictly to safety guidelines and requirements. Follow guidelines set forth by the customer. Other Education, Responsibilities and Qualifications Performs other related duties as assigned to ensure efficient and effective processes, completion of projects and smooth operation of department. Education and Experience High School Diploma or GED required Bachelors degree preferred 1-5+ years experience as an OSP Fielder or similar and relative engineering experience which may include performing site surveys and developing appropriate build plans Qualifications Required Skills, Knowledge, and Abilities Strong knowledge of construction & telecommunication. specifications required Demonstrated ability to effectively utilize industry tools; such as measuring wheels, height sticks, pull finders, MH/HH hooks, etc. Strong analytical and problem-solving skills required. Intermediate ability with Windows operating systems. Intermediate ability with Microsoft office applications - Excel, Word, PowerPoint. Ability to problem solve in order to keep project on time and budget. Will be operating DOT registered vehicles. Must be in compliance with DOT regulations. Work Environment The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically fit to endure the daily activity involved with the job. May work inside or outside. Possible exposure to hot and cold temperatures, works in all-weather elements such as rain, heat, cold and snow. This position may require work at extreme heights, in areas that are under construction, or in restricted areas such as a switchgear room, manhole, utility tunnel, crawl space, or attic, in confined spaces, and on slippery or uneven surfaces; works on ladders, scaffolds, aerial lifts, catwalks, in ditches and excavations; works in and around single and multi-story buildings with all exposures typical of a heavy construction site, roadside construction, including portable sanitary facilities. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach overhead. Sit for long periods of time while driving. Lift or move up to 50 pounds. Constantly move about on the feet. Climb ladders of all types. Complete full day assignments involving overhead work. Must be able to make transition from employee parking area or street into construction work areas and to access all levels of the building, even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction, but acceptable for use. Must be capable of securing tools and materials from storage areas to complete assigned tasks. Possess good vision, normal or corrected. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Possess good hearing, normal or corrected. Must be able to positively identify different colors of wiring, conduit, and fiber optics. Wear personal protective equipment (hard hat, safety glasses, safety vest) at all times. Must be able to work 8 hours a day, 40 hours per week, and overtime as required and night shifts, as needed. This position requires flexible work hours. In order to get a project completed on time, this position may be required to work overtime, weekends, and night shifts. Must be able to work in the presence of customers and their representatives with little or no interference or disruption to the customer while maintaining a professional and courteous image. CEC Companies is an Equal Opportunity Employer committed to diversity in our workforce. It is our policy to attract and retain the best-qualified people available, without regard to race, color, religion, national origin, gender, sexual orientation, age, disability, status as a military veteran, or any other status protected under federal, state, or local law. Diverse candidates are encouraged to apply.

Worley is a global professional services company of energy, chemicals and resources experts headquartered in Australia. Right now, we're bridging two worlds as we accelerate to more sustainable energy sources, while helping our customers provide the energy, chemicals and resources that society needs now. We partner with our customers to deliver projects and create value over the life of their portfolio of assets. We solve complex problems by finding integrated data-centric solutions from the first stages of consulting and engineering to installation and commissioning, to the last stages of decommissioning and remediation. Join us and help drive innovation and sustainability in our projects. Purpose: You will provide mechanical engineering services to Worley, and its Customers and may provide technical support and supervision within the mechanical team. Responsibilities: * Deliver mechanical engineering services that meet Worley, its customers and applicable statutory and regulatory specifications, on time and within budget. * Perform mechanical engineering services such as: * identify and report changes to project scope; * assist with the preparation of proposals, estimates, budgets and schedules; * provide assistance during procurement, construction and commissioning activities. For example, write requisitions, conduct technical bid evaluations and write purchase orders; * contribute to appropriate studies, analyses and recommend actions; * assist with the preparation of detailed designs and drawings, specifications, data, calculations and reports. * Keep up-to-date with the latest developments and technical innovations in mechanical engineering. * If required, assist and support junior personnel within the mechanical engineering team. * Communicate effectively with the mechanical engineering team and project stakeholders, including the customer. * Identify issues and problems, develop appropriate solutions, and ask for assistance when required. What you will bring Technical and Industry Experience: * Effective technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to Worley and its customers. * A good working knowledge of the fundamental requirements of mechanical engineering, and the basic requirements of other engineering fields. * A good working knowledge of applicable local and international standards and statutory and regulatory specifications. * Competent use of mechanical engineering specific software and relevant software such as MS Office Suite. * Engineering experience in the same or similar industry, and developing leadership skills. * Some job site or factory experience. Education - Qualifications, Accreditation, Training: Required: * A recognized degree in the relevant engineering discipline or equivalent. Preferred: * Chartered Professional Engineer (CPEng) status. Moving forward together We want our people to be energized and empowered to drive sustainable impact. So, our focus is on a values-inspired culture that unlocks brilliance through belonging, connection and innovation. We're building a diverse, inclusive and respectful workplace. Creating a space where everyone feels they belong, can be themselves, and are heard. And we're not just talking about it; we're doing it. We're reskilling our people, leveraging transferable skills, and supporting the transition of our workforce to become experts in today's low carbon energy infrastructure and technology. Whatever your ambition, there's a path for you here. And there's no barrier to your potential career success. Join us to broaden your horizons, explore diverse opportunities, and be part of delivering sustainable change. We're committed to building a diverse, inclusive and respectful workplace where everyone feels they belong, can bring themselves, and are heard. We provide equal employment opportunities to all qualified applicants and employees without regard to age, race, creed, color, religion, sex, national origin, ancestry, disability status, veteran status, sexual orientation, gender identity or expression, genetic information, marital status, citizenship status or any other basis as protected by federal, state, or local law. Our policy is to conduct background checks for all candidates who accept an offer of employment with us. Please note: No agency representation or submissions will be recognized for this vacancy.

. The candidate must have demonstrated expertise working with a team of engineers and scientists on sediment remediation projects for a variety of clients including those in the Federal and Public sector. Sediment remediation experience will be considered on an individual basis, but experience in the following bullets is preferred. Roles and responsibilities include, but are not limited to: - Providing expertise in evaluating the feasibility of sediment remediation technologies and preparing sediment remediation designs for large riverine and coastal sites involving multiple stakeholders. - Understanding the scientific and engineering principles of sediment and contaminant transport, environmental site assessment, sampling technologies, cap modeling, and remedial action design. - Providing support of mathematical/statistical evaluations of environmental data sets. - Serving as CDM Smith's task manager on various components of complicated sediments sites. This includes having the ability to assess and understand a problem, develop and communicate a technical strategy to the client, and interact effectively with CDM Smith subject matter experts. - Possessing an in-depth expertise in the various CERCLA process steps at sediment Superfund sites. - Serving as a technical liaison with the client, communicating complicated technical evaluations and designs to non-subject matter experts. - Leading other staff in preparing/reviewing/scrutinizing technical information to provide a document that is technically sound and that conforms to applicable regulations and policy. \#LI-AE1 **Job Title:** Jr Sediment Remediation Engineer **Group:** ESO **Employment Type:** Regular **Minimum Qualifications:** Bachelor's degree in Civil, Environmental or Chemical Engineering or related discipline. 3 years of related experience. Domestic and/or international travel may be required. The frequency of travel is contingent on specific duties, responsibilities, and the essential functions of the position, which may vary depending on workload and project demands. Equivalent additional directly related experience will be considered in lieu of a degree. **Preferred Qualifications:** - Team player, excellent written and verbal skills. - Client-focused and ability to partner with clients (mainly Federal and Public agencies). - Negotiation and presentation skills. **EEO Statement:** We attract the best people in the industry, supporting their efforts to learn and grow. We strive to create a challenging and progressive work environment. We provide career opportunities that span a variety of disciplines and geographic locations, with projects that our employees plan, design, build and operate as diverse as the needs of our clients. CDM Smith is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, pregnancy related conditions, childbirth and related medical conditions, sexual orientation, gender identity or gender expression), national origin, age, marital status, disability, veteran status, citizenship status, genetic information or any other characteristic protected by applicable law. **Why CDM Smith?:** Check out this video and find out why our team loves to work here! (************************************************* **Join Us! CDM Smith - where amazing career journeys unfold.** Imagine a place committed to offering an unmatched employee experience. Where you work on projects that are meaningful to you. Where you play an active part in shaping your career journey. Where your co-workers are invested in you and your success. Where you are encouraged and supported to do your very best and given the tools and resources to do so. Where it's a priority that the company takes good care of you and your family. Our employees are the heart of our company. As an employer of choice, our goal is to provide a challenging, progressive and inclusive work environment which fosters personal leadership, career growth and development for every employee. We value passionate individuals who challenge the norm, deliver world-class solutions and bring diverse perspectives. Join our team, and together we will make a difference and change the world. **Job Site Location:** United States - Nationwide **Agency Disclaimer:** All vendors must have a signed CDM Smith Placement Agreement from the CDM Smith Recruitment Center Manager to receive payment for your placement. Verbal or written commitments from any other member of the CDM Smith staff will not be considered binding terms. All unsolicited resumes sent to CDM Smith and any resume submitted to any employee outside of CDM Smith Recruiting Center Team (RCT) will be considered property of CDM Smith. CDM Smith will not be held liable to pay a placement fee. **Amount of Travel Required:** 20% **Assignment Category:** Fulltime-Regular **Visa Sponsorship Available:** No - We will not support sponsorship, i.e. H-1B or TN Visas for this position **Skills and Abilities:** Expert Knowledge of computer assisted design and drafting (CADD) 3D and 4D software and practices. Solid knowledge of engineer principles of design. Expert Knowledge of Microsoft business software (excel, word, etc.). Excellent verbal and written communications skills. **Background Check and Drug Testing Information:** CDM Smith Inc. and its divisions and subsidiaries (hereafter collectively referred to as "CDM Smith") reserves the right to require background checks including criminal, employment, education, licensure, etc. as well as credit and motor vehicle when applicable for certain positions. In addition, CDM Smith may conduct drug testing for designated positions. Background checks are conducted after an offer of employment has been made in the United States. The timing of when background checks will be conducted on candidates for positions outside the United States will vary based on country statutory law but in no case, will the background check precede an interview. CDM Smith will conduct interviews of qualified individuals prior to requesting a criminal background check, and no job application submitted prior to such interview shall inquire into an applicant's criminal history. If this position is subject to a background check for any convictions related to its responsibilities and requirements, employment will be contingent upon successful completion of a background investigation including criminal history. Criminal history will not automatically disqualify a candidate. In addition, during employment individuals may be required by CDM Smith or a CDM Smith client to successfully complete additional background checks, including motor vehicle record as well as drug testing. **Pay Range Minimum:** $71,094 **Pay Range Maximum:** $117,333 **Additional Compensation:** All bonuses at CDM Smith are discretionary and may or may not apply to this position. **Work Location Options:** Hybrid Work Options may be considered for successful candidate. **Driver's License Requirements:** An appropriate and valid driver's license is required. **Massachusetts Applicants:** It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Join us to design places that make a difference As a Cushing Terrell team member, you will create built environments that push the boundaries of cutting-edge design and contribute to thriving communities. You will join a multidisciplinary team of talented engineers, architects, designers, planners, and business professionals who work across 17 office locations and remotely throughout the United States. Our vision is to shape a new world using knowledge and creativity to educate, enlighten, delight, unite, preserve, sustain, and forever improve. As a Mechanical Engineer -In-Training or Designer, you will be an integral part of the design team to produce construction documents for HVAC and Plumbing projects. This position will use Revit building information software as a drafting and design tool. This role will gain an understanding of HVAC systems and plumbing design on a variety of building construction projects. This position will work under the guidance of a senior engineer as you learn the mechanical consulting profession. Qualifications* you will bring to the table: A Bachelor's degree or higher education in Mechanical Engineering or related field Minimum 1 year of experience in consulting HVAC engineering, however 5 years is preferred working on projects within the United States Successfully passed Fundamentals of Engineering Exam preferred Licensed Professional Engineer in State of Montana preferred or willing to get licensed Basic knowledge of Autodesk MEP Revit, Auto CADD, Bluebeam, Microsoft Excel, Microsoft Word, and Outlook Basic knowledge of heating/cooling loads software such as Carrier HAP or Trane Trace. Basic knowledge of HVAC systems, duct and piping sizing, chillers, heat pumps, VAV systems Basic knowledge of plumbing systems, domestic and DWV sizing, water heaters, fixtures Self-motivated and ability to effectively manage time * Did you know that some people hold back on applying to jobs if they don't meet 100% of the listed requirements? We don't want you to hold back! If you don't check every point above but still feel like you could successfully do the work, we encourage you to apply! As a Team Member at Cushing Terrell, you will*… Assist HVAC and plumbing team in project delivery Produce basic piping, duct and equipment layouts and sizing under supervision of Professional Engineer Assist in the production of construction documents utilizing Revit building information modeling software (BIM) Electronically draft plans, schedules, details, controls and flow diagrams for HVAC and plumbing systems Perform site investigations to as-build existing HVAC and plumbing systems for remodel projects Perform heating and cooling load calculations Perform basic calculations for HVAC system and/or plumbing system design Perform basic equipment selection of fans, pumps, and plumbing fixtures Assist with checking shop drawings during construction administration Develop an understanding of HVAC and plumbing system design for different building types *The majority of the time, a person in this role will be sitting in an office with limited physical requirements. This may require individuals to bend, stretch, twist, and reach. Your pay The salary for this position is based on the location/s posted. If you are a candidate living outside of (this region/these regions), we still encourage you to apply as salary ranges may differ across states/cities/job markets. Expected Range*: $55,000 to $67,000 The position is also eligible for an annual performance bonus *The actual salary offered for the role will be determined based on various factors including but not limited to; years of experience, certifications, location, level of job-related knowledge, and other job-related factors (as permitted by law). Why Cushing Terrell? Cushing Terrell offers excellent, competitive employee benefits; please view our Employee benefits guide for more information. View our Employee Benefits Guide for more information. Equity Cushing Terrell is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to actual or perceived race, age, color, religious creed, sex or gender, sexual orientation, gender identity or expression, marital status, national origin, ancestry, citizenship status, physical or mental disability, military status or status as a protected veteran, or any other characteristic protected by applicable federal, state, or local laws and ordinances. Applicants must be currently authorized to work in the United States on a full-time basis. If you need assistance or accommodation while seeking employment with us, please call ************. We will review requests for reasonable accommodation on a case-by-case basis. If you are having difficulty applying through an external website, please visit ****************************** We look forward to hearing from you!

Project Engineer ***Work Location: Minot AFB (Minot, ND)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for overseeing all aspects of construction projects, from planning to execution and closeout. Managing and overseeing project plans, schedules, and budgets Coordinating with architects, engineers, and contractors to ensure project milestones are met; serving as a primary point of contact for clients and stakeholders, communicating project progress, issues, and resolutions effectively Performing documents review of contract documents for schedule compliance and reasonability. Identifying potential risks and developing mitigation strategies; ensuring compliance with legal and regulatory requirements Implementing quality control measures to ensure work meets specifications and standards Conducting regular inspections and audits to identify and address quality issues Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Assisting with hosting site visits and giving presentations to owner's representatives. Providing guidance, mentoring, and training to team members; overseeing contract negotiations, administration, and compliance, resolving disputes and issues related to contracts Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Produce monthly project reports displaying project status and updates for customers Participates in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and prepares contract modification documentation. Attend and participate in meetings with customers and contractors. Performs other duties as assigned Education/Experience: Bachelor's Degree in Engineering, Construction Management, Architecture, or related field Minimum 10 years Construction Project Management experience PMP certification is preferred. Experience with Federal Construction projects, particularly USACE, is preferred. Strong background in Project Management (PM), with the ability to lead and motivate teams to achieve project goals Strong interpersonal and presentation skills are required Strong technical competencies to create presentation materials and deliver presentations via electronic methods. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Essential Job Duties and Responsibilities: Develops layout concepts, parameters, and designs for new and existing product re-designs. Uses mathematics, statistics, dynamics, and other engineering disciplines for calculations and evaluation of alternatives for current product design and their functionality in current product designs. Performs analysis as required to insure meeting product performance and reliability requirements. Conducts feasibility studies and prepares preliminary cost estimates of designs and redesigns. Communicates with vendors where engineering is required to develop specifications for components and processes. May write a rough draft of changes to the customer instruction sheet. Assists in fabricating and building working prototypes of new products. May assist the purchasing department in vendor selection. Perform product evaluations to determine if engineering standards are met Flexibility to perform other duties and assignments as required. Summarizes research and development work in a report and specification. Develops engineering specifications for materials or processes through research and/or supervision of test programs. Assist in the development of work instructions that convey design intent to the assembly process. Coordinates project progress by monitoring the performance of designers, drafters, and other personnel. Troubleshoot product systems as required and work directly with technicians and assemblers to resolve issues. Provide engineering support to Field Service to assist in resolving warranty and performance issues. Understand multi-level product Bill of Material structure to effectively develop options and/or accessories to support product sales. Evaluate product cost reduction proposals to determine feasibility. May include travel to the field and/or trade shows. Position Requirements: Bachelor's degree in Mechanical Engineering or Mechanical Engineering Technology 3-5 years of engineering experience; mobile equipment applications are a plus SolidWorks and SolidWorks PDM experience and proficiency are required AutoCAD experience is a plus Fluid power system design Knowledge of DOT and OSHA regulations Knowledge of Lean Manufacturing principles is a plus Working in a Manufacturing environment is a plus General application of standard principles, theories, concepts, and techniques within field of specialization. Possess strong verbal and written communications skills Benefits of Employment: In addition to excellent career growth opportunities, MRL offers a wide array of benefits, including annual bonus potential, insurance (life, medical, dental, vision), paid holidays, paid vacation, and 401(k) with generous matching contributions. We provide our employees with a smoke-free, drug-free workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. MRL is committed to creating a diverse and welcoming workplace. We are an Equal Opportunity Employer committed to building a diverse workforce. (Female/Minority/Disability/Protected Veteran/Sexual Orientation/Gender Identity) About Us MRL manufactures quality-built, highly productive traffic paint, thermoplastic, plural components, and line removal/paving grooving equipment. Since 1967, MRL's extensive “hands-on” pavement marking contracting experience, innovative engineering, and attention to quality have enabled MRL to become the largest equipment supplier to the industry. Decades of MRL's reliable performance-setting industry standards, coupled with the industry's largest parts support inventory and most experienced technical support staff, can be summed up in one statement: “When it matters most, MRL Delivers!”! Federal Signal Corporation (NYSE: FSS) builds and delivers equipment of unmatched quality that moves material, cleans infrastructure, and protects the communities where we work and live. Founded in 1901, Federal Signal is a leading global designer and manufacturer of products and total solutions that serve municipal, governmental, industrial, and commercial customers. Headquartered in Downers Grove, IL, with manufacturing facilities worldwide, the company operates two groups: Environmental Solutions and Safety and Security Systems. For more information on Federal Signal, visit: ********************** The company is an equal opportunity employer. Qualified applicants will not be discriminated against on the basis of, and will receive consideration for employment without regard to, race, color, religion, national origin, sex, sexual orientation, gender identity, age, disability, genetic information, status as a protected veteran, or any other protected category, characteristic, or trait under applicable law. If you require reasonable accommodation in the application process, contact Human Resources at ********************. All other applications must be submitted online. We are an Equal Opportunity Employer committed to building a diverse workforce. (Female, Minority, Disability, Protected Veteran, Sexual Orientation / Gender Identity) All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

For over 60 years, DOWL has thrived as an established, highly reputable, professional services consulting firm, recognizing that the foundation of our past, present, and our future is our people. DOWL's foundation is built upon four core values: Inclusion, Integrity, Innovation, and Inspiration. These values are rooted in everything we do. As a valued partner on our team, you will be one of the People Who Make It Happen! Summary The Transportation Project Engineer 2 is focused on performing advanced levels of engineering calculations, alternatives analysis, and design on the largest, most complex transportation projects that include sidewalks, bike paths, local roadways, intersections, highways, freeways, and other transportation facilities. Duties include leading site visits, preparing CAD mark-ups, geometric roadway layout and design, performing 3D corridor modeling, writing project specifications and technical reports, calculating construction quantities, estimating construction costs, coordinating with clients and stakeholders, drafting scope and budget documents for transportation-related tasks, and preparing project correspondence. The person in this position is expected to exercise a strong work ethic, desire to learn new design concepts, and have excellent organizational and communication skills. A successful Transportation Project Engineer 2 should demonstrate highly advanced proficiency with design and drafting fundamentals in at least one software platform, be able to quickly learn, apply and teach new 2D and 3D design concepts quickly without oversight, and mentor others with less experience. A successful employee is expected to work well with others, absorb and apply constructive criticism and seek guidance from more experienced members of the team as necessary. Job Responsibilities and Duties To be successful in this position, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Software * Microsoft Office (Outlook, Word, Excel) - Advanced * Market Sector Software (AutoCAD C3D) - Advanced * Market Sector Software (Microstation Connect and OpenRoads) - Advanced (if applicable) * 3D design and visualizations (e.g., Revit, Infraworks) - Proficient (if applicable) * Task Specific (e.g., AutoTurn, GuideSign) Technical Expertise * Advanced understanding of technical fundamentals * Demonstrates expertise to others within and beyond market sector * Provides unique solutions to complex technical challenges * Leads internal mentoring * Performs quality control technical checking of complex deliverables Teamwork Team player and team leader with the ability to follow on large or complex projects. Provides clear communication and direction, sets expectations, and takes responsibility for results of the team. Project Delivery Leads the production of and provides quality control for the following: * Technical reports and memos * Specifications * Construction quantity calculations and cost estimates * Design documents and construction plans * Breakdown of costs and scope of work - Proficient * Schedules - Proficient * Proposal technical approach Understanding Budget and Schedule Strong understanding of scopes, schedules, and budgets. Able to predict and deliver individual tasks within a set level of effort. Develops budgets and schedules for complex tasks and projects. Breaks down complex projects into logical tasks. Able to prioritize multiple assignments to successfully deliver all assigned projects on time and on budget. Mentors others on above. Industry Standards and Regulations * Expertly interprets, selects, and employs the following design codes: * AASHTO and FHWA - Advanced * Local Client - Advanced * Actively mentors others on interpreting design codes * Understands limitations of design codes Client Interaction Frequent direct communications with clients on large/complex projects. Leads technical client project meetings. Understands appropriate messaging and legal risks. Participates in project interviews. Other Other duties as assigned. Level of Work/Accountability Primarily performs advanced technical tasks on complex, demanding projects for the market sector. Operates with a high level of autonomy. Reviews the work of others. Mentors others with less experience. May perform assistant project management services. May perform the role of project engineer on multidisciplinary projects. Provides technical guidance on proposals. Supervisory Duties May be a supervisor: * Oversees team operations and the daily workflow of the team * Organizes workflow and ensures that employees understand their duties or delegated tasks * Recruits and hires new employees * Implements training for new hires and identifies training opportunities for current staff * Communicates information from leadership to employees and vice versa * Monitors employee productivity and provides constructive feedback and coaching * Sets goals for performance and deadlines in ways that comply with company's plans and vision and communicates them to employees * Provides constructive and timely performance evaluations * Decides on reward and promotion based on performance * Handles discipline and termination of employees as needed and in accordance with company policy Education and/or Experience * Bachelor's Degree required * Years of experience required: 10 years * Years of experience required with advanced degree: 9 years Certificates, Licenses, Registrations * PE required * Must have a valid driver's license and a good driving record Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to sit. The employee is required to talk and hear. The employee is regularly required to stand, walk, and use hands. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this position include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Geographical locations are taken into consideration with respect to compensation.

Responsibilities: Responsibilities include project management and design of transportation and natural resource engineering projects, NEPA permitting, engineering report writing, construction management and observation; and coordination with other engineering staff, suppliers, contractors, and clients. Uses computer-assisted engineering and design software and equipment to prepare engineering and design documents. Write technical specifications, reports, and other correspondence to various audiences. Coordinate with government agencies, client staff, and other professionals to obtain design information and approvals. Candidate should have a solid track record of managing internal technical teams and managing projects to profitability. Requirements: Qualified candidates will have a BS/BA in Engineering or related degree and a minimum of 5+ years of experience in designing transportation or natural resource projects. Additionally, a Professional Engineering (PE) license in Montana, Idaho, Washington, or the ability to obtain within six months. Overseeing tasks/projects and clients' expectations to scope, time, and budget goals for the planning, design, and construction of natural resource projects, as well as creating construction documents, specifications and handling construction oversight/administration. Ability to work independently as well as in a collaborative team environment; offer constructive feedback and direction to support goals. Excellent work ethic and a comprehensive understanding of engineering principles. Benefits and Compensation: Competitive Salary Bonus Time for Billable Overtime Hours Bonus Opportunities Traditional & Roth 401k plans with Immediate Company Match Paid Health Insurance for Employee (Medical, Dental, Vision) Paid Life Insurance Paid Short & Long-term Disability Insurance Paid Holidays Paid Sick & Vacation Time Family-Oriented Environment Student Loan Repayment Program First-time Home Buyers Program Kodi Miller (Miss) Talent Scout AKP Recruiting kodi@akprecruiting.com www.akprecruiting.com Josh May President AKP Recruiting (406) 633-1654 josh@akprecruiting.com www.akprecruiting.com

Impact Recruitment is currently looking for a Hydraulics Project Engineer eager for an opportunity to join an award-winning regional team of transportation engineers in Billings, Montana. Join one of The Best Firms to Work For and make a difference in the lives of your neighbors; leave a mark that will last well beyond your lifetime. Join our client's team and help to plan and design communities that will endure for generations to come. Desired Skills: Lead hydraulics design on Montana Department of Transportation including, hydrologic analysis, storm drainage design, low impact development design, irrigation ditch, pipe and structure design, culvert design, ditch design Prepare reports (hydraulics and various MDT milestone report submittals) Assist with project proposals and scoping Manage hydraulics for DOT Group including, training staff hydraulic engineers, day to day tasking, reviewing and QA/QC, general oversight of all DOT Group hydraulic efforts, manage hydraulics budgets. Interact with MDT Hydraulics staff. Create a positive working environment through supportive teamwork, proactive communication, and enthusiastic attitude Qualifications Preferred: Bachelor’s degree in Civil, Water Resources, Environmental Engineering, or a related degree. Minimum of 6 years of water resource experience. Professional Engineer License required. Demonstrated ability to organize and manage multiple priorities. Proficiency with Hec-Ras, AutoCAD, ArcGIS, HY-8, AutoDesk’s Storm and Sanitary Analysis or similar storm drain modeling program preferred. This is an immediate opening with outstanding benefits and salary package available commensurate with experience. Reach out to Impact Recruitment at info@impactrecruitment.com/************** to learn more about this position. Impact Recruitment is an equal opportunity employer. Impact Recruitment does not discriminate in recruitment, hiring, or terms or conditions of employment on the basis of race, sex, color, national origin, sexual orientation, religion, age, disability, medical condition as defined under state law, or any other basis prohibited by applicable federal, state, or local law. Impact Recruitment also provides reasonable accommodations to disabled individuals to assist in the hiring process and to qualified individuals with disabilities in the performance of essential job functions, as required by federal, state, or local law.

Job Title: Assistant Staff Engineer at Trihydro Corporation As an assistant staff engineer, you will provide field and office support for environmental sampling programs, manage data using a variety of software tools, prepare and review technical reports, and support remediation and construction projects at refineries and other petroleum or industrial sites under regulatory orders. This full-time position requires approximately 40-45 hours per week and involves a blend of project management, strong communication skills, and problem-solving abilities. If you thrive in a fast-paced, collaborative environment, this opportunity is ideal for you. Key Responsibilities: Groundwater and soil sampling. QA/QC and data management. Refinery office support (report production, mailings, data analysis). Environmental task coordination. Qualifications: A bachelor's degree in engineering, or a related field. 0-3 years of relevant work experience. Competitive academic GPA. Problem-solving excellence, self-motivation, and a strong work ethic. Fluency in Microsoft Excel (familiarity with other Microsoft Office programs is a bonus). Exceptional written and oral communication skills, including technical writing, with the ability to interact effectively with clients and project team members. Strong interpersonal skills and a positive attitude. Good employment or academic history with a commitment to safe work practices. Initiative and motivation with an emphasis on completing high-quality project deliverables on schedule. Ability to work reliably in teams as well as independently. Ability to travel, up to 50 percent, to client sites and other Trihydro offices. A clean driving record. Ability to obtain a Transportation Worker Identification Credential. What We Offer: Industry-leading 401(k) retirement plan, including a 6% discretionary match Paid time off including vacation, flex, sick, paid family medical leave, and holiday pay Comprehensive health insurance program (medical, dental, vision, and prescription) Opportunities for professional development and career growth A collaborative and inclusive work environment Mentoring and opportunities for professional advancement Best-in-class safety culture This position will remain open until a qualified candidate has been selected. About Us: Trihydro Corporation is a national engineering and environmental consulting firm. Our team values integrity and collaboration to complete meaningful projects that make a difference for our clients and communities. We are looking for a talented and hard-working individual to join our team. Trihydro is an Equal Opportunity, Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, genetic information, disability, or because of a protected Veteran status.

Billings, Bozeman, Helena, MT or Hybrid We welcome you to consider Sanbell as the next step in your exciting career as a civil engineer. Sanbell is a multi-disciplinary engineering, community planning, and design firm serving clients throughout the Western United States. Built by merging 4 strong firms with similar foundational and cultural values, our team of engineers, planners, landscape architects, surveyors, and designers is now stronger. We are 200 + team members strong with 9 office locations in Montana, Colorado, Nevada, and California. By joining the Sanbell team, you will have the opportunity to work and grow alongside a large network of Cool + Smart + Talented + Professionals (CSTP), with a variety of technical expertise, years of experience, and vast knowledge of the engineering industry. Our design team of bright engineers collaborate on a multitude of diverse and exciting public and private projects. We believe we must think beyond the basic requirements of engineering, beyond our entrenched assumptions, and creatively design practical solutions that work. Because the success of every project affects the entire community. That passion for creative but practical solutions has driven Sanbell to become a regional, award-winning planning, design, and engineering firm. Sanbell offers competitive compensation, including excellent benefits for retirement, health care, dental, vacation, and holidays (see below for more information). Job Duties/Responsibilities: Lead hydraulics design on DOT projects including, Hydrologic analysis Storm drainage design Low impact development design Irrigation ditch, pipe, and structure design Culvert design Ditch design Prepare report (hydraulics and various DOT milestone report submittals) Prepare project proposals and scoping. Manage hydraulics for DOT Group including, Review and QA/QC General oversight of DOT Group hydraulic efforts Manage hydraulics budgets Mentoring/training junior staff in hydraulic analysis and design Interact with MDT Hydraulics staff and maintain client relationships with MDT Hydraulics staff and maintain client relationships Minimum Education Requirements: B.S. in Civil, Water Resources, Environmental Engineer, or a related degree Required Qualifications (Skills/Experience/Certifications): PE Certification 6 + years of hydraulic/water resources and road design experience Preferred Qualifications (Skills/Experience/Certifications): Proficiency with HEC-RAS, AutoCAD, ArcGIS, HY-8, AutoDesk's Storm and Sanitary Analysis or similar storm drain modeling program preferred Benefits: Medical, Dental and Vision Performance Bonus 401(k) and Roth 401(k)with 4% match Paid time off (PTO) Paid Holidays Flexible Hours Reimbursement for certification and license expenses Group Life, Vol. Life and Long-Term Disability Health Savings Account (HSA) FSA Dependent Care Plan (Section 129) Tuition Assistance Relocation Assistance Paid Parental Leave Program Employee Assistance Program (EAP) Bring your good dog to work Compensation: $88,000-$120,000 yr. Sanbell is an equal-opportunity employer. Sanbell provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

For over 60 years, DOWL has thrived as an established, highly reputable, professional services consulting firm, recognizing that the foundation of our past, present, and our future is our people. DOWL's foundation is built upon four core values: Inclusion, Integrity, Innovation, and Inspiration. These values are rooted in everything we do. As a valued partner on our team, you will be one of the People Who Make It Happen! Summary The Transportation Project Engineer 2 is focused on performing advanced levels of engineering calculations, alternatives analysis, and design on the largest, most complex transportation projects that include sidewalks, bike paths, local roadways, intersections, highways, freeways, and other transportation facilities. Duties include leading site visits, preparing CAD mark-ups, geometric roadway layout and design, performing 3D corridor modeling, writing project specifications and technical reports, calculating construction quantities, estimating construction costs, coordinating with clients and stakeholders, drafting scope and budget documents for transportation-related tasks, and preparing project correspondence. The person in this position is expected to exercise a strong work ethic, desire to learn new design concepts, and have excellent organizational and communication skills. A successful Transportation Project Engineer 2 should demonstrate highly advanced proficiency with design and drafting fundamentals in at least one software platform, be able to quickly learn, apply and teach new 2D and 3D design concepts quickly without oversight, and mentor others with less experience. A successful employee is expected to work well with others, absorb and apply constructive criticism and seek guidance from more experienced members of the team as necessary. Job Responsibilities and Duties To be successful in this position, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Software Microsoft Office (Outlook, Word, Excel) - Advanced Market Sector Software (AutoCAD C3D) - Advanced Market Sector Software (Microstation Connect and OpenRoads) - Advanced (if applicable) 3D design and visualizations (e.g., Revit, Infraworks) - Proficient (if applicable) Task Specific (e.g., AutoTurn, GuideSign) Technical Expertise Advanced understanding of technical fundamentals Demonstrates expertise to others within and beyond market sector Provides unique solutions to complex technical challenges Leads internal mentoring Performs quality control technical checking of complex deliverables Teamwork Team player and team leader with the ability to follow on large or complex projects. Provides clear communication and direction, sets expectations, and takes responsibility for results of the team. Project Delivery Leads the production of and provides quality control for the following: Technical reports and memos Specifications Construction quantity calculations and cost estimates Design documents and construction plans Breakdown of costs and scope of work - Proficient Schedules - Proficient Proposal technical approach Understanding Budget and Schedule Strong understanding of scopes, schedules, and budgets. Able to predict and deliver individual tasks within a set level of effort. Develops budgets and schedules for complex tasks and projects. Breaks down complex projects into logical tasks. Able to prioritize multiple assignments to successfully deliver all assigned projects on time and on budget. Mentors others on above. Industry Standards and Regulations Expertly interprets, selects, and employs the following design codes: AASHTO and FHWA - Advanced Local Client - Advanced Actively mentors others on interpreting design codes Understands limitations of design codes Client Interaction Frequent direct communications with clients on large/complex projects. Leads technical client project meetings. Understands appropriate messaging and legal risks. Participates in project interviews. Other Other duties as assigned. Level of Work/Accountability Primarily performs advanced technical tasks on complex, demanding projects for the market sector. Operates with a high level of autonomy. Reviews the work of others. Mentors others with less experience. May perform assistant project management services. May perform the role of project engineer on multidisciplinary projects. Provides technical guidance on proposals. Supervisory Duties May be a supervisor: Oversees team operations and the daily workflow of the team Organizes workflow and ensures that employees understand their duties or delegated tasks Recruits and hires new employees Implements training for new hires and identifies training opportunities for current staff Communicates information from leadership to employees and vice versa Monitors employee productivity and provides constructive feedback and coaching Sets goals for performance and deadlines in ways that comply with company's plans and vision and communicates them to employees Provides constructive and timely performance evaluations Decides on reward and promotion based on performance Handles discipline and termination of employees as needed and in accordance with company policy Education and/or Experience Bachelor's Degree required Years of experience required: 10 years Years of experience required with advanced degree: 9 years Certificates, Licenses, Registrations PE required Must have a valid driver's license and a good driving record Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to sit. The employee is required to talk and hear. The employee is regularly required to stand, walk, and use hands. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this position include close vision and ability to adjust focus. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Geographical locations are taken into consideration with respect to compensation.

Open until filled The Montana Department of Transportation is recruiting Field Project Technicians. This position serves as an experienced Field Project Technician within the Billings District and is responsible for coordinating and conducting various inspection, sampling, and testing procedures to verify that construction project features and materials conform with standard specifications, Department requirements, and contract agreements. The position is also responsible for coordinating and conducting staking and surveying procedures and performing a variety of other duties as assigned. The position reports to the Field Project Technician III and provides guidance and technical assistance to less experienced Field Project Technicians performing routine inspections, sampling, testing, and surveying procedures.

Apply Today The Project Engineer is responsible for providing all paperwork and documentation for construction projects, especially for field analysis costs. They also coordinate the preparation and supply of necessary information and data for the company accountants. Works directly with the Project Manager. Primarily work 8-10-hours per day, 5 days per week. Office location will be the onsite job trailer for the project. Travel is required to various job site locations. Qualification Requirements: * Civil Engineering, Construction Engineering, Construction Management degree preferred, and/or equivalent combination of education and experience required. * Proficient with computers and a variety of construction-related software. * Must have a valid driver's license. * Must be able to work independently with little supervision. Essential Job Functions: Before Project Starts: * Prepares all project submittals, including preliminary schedules, list of materials, materials specifications submittals, list of subcontractors, etc. * Communicates with accounting staff as necessary to prepare subcontracts, requests for insurance certifications, etc. * Secures necessary project permits. * Prepares list of internal materials including quantities and prices, and reviews with material sales personnel. During the Project: * Reviews timecards daily for coding accuracy and submits them to the office for processing. * Collects and files project reports that the Superintendent submits. * Works with the Project Manager to maintain project files. Prepares letters, meeting agendas, etc. as necessary. * Matches project invoices for project materials and for all project purchase orders. * Creates daily posting of project quantities and the weekly project cost projections. * Works with Project Manager to prepare all relevant information for accounting department to post monthly billings for all projects assigned. * Verifies that subcontractor payments match subcontractor invoices. Facilitates measuring quantities with subcontractor as required for an agreement prior to payment. * Communicates directly with the owners and architects as needed. Creates positive relationships with crew, owners, subcontractors, etc. * Maintains detailed and current as-built drawings and specifications. * Leads project scheduling process. * Actively involved in quantity tracking, productions and costs to facilitate the bidding process. Materials Management: * Contacts Superintendent on assigned projects to get desired orders for materials. Reviews materials posted to projects to ensure accuracy. * Managing the procurement process for long lead time materials and equipment. After Project Completion: * Completes final cost report for the project. * Prepares all files for project documentation and storage. * Works with the Project Manager with submitting project closeout documents and information to owner. * Reviews with Project Manager the final pay quantities and final payment and adjusts contract value. Non-Essential Job Functions: * May perform other duties as needed. * Mentor other employees. * Adheres to and enforces company policies and procedures. Physical Demand Classification: * Project Engineer is a Medium Duty job, according to the Selected Characteristics of Occupations Defined in the Revised Dictionary of Occupational Titles, U.S. Department of Labor and Industry. Medium Duty involves exertion of 20-50 pounds of force occasionally, and/or 10-25 pounds frequently, and/or up to 10 pounds continuously to move objects. Apply Today

At GAF, we cover more than buildings. We cover each other. No matter what role, tenure, or track, under this roof you are empowered to be there for your teammates, your customers, and especially your community. Under this roof, we don't back down from hard work- we support one another in pursuit of something bigger. We define the future while leading the present. And under this roof, we own our opportunities. Becoming the market leader only happens when everyone feels they have the opportunity, and the support, to thrive. We are GAF. And under this roof, we protect what matters most. **Job Summary** We are seeking a Sr. Engineer - Koerber/HighJump who is a skilled professional, possessing a strong development and technical analysis background in enterprise-level applications. This person will possess a strong expertise in Application Development/Integration tools. This includes researching, designing, documenting, and modifying solutions throughout the software development life cycle.The Sr. Engineer - Koerber/HighJump is capable of working on extremely complex applications/projects and has demonstrated throughout their career as a functional expert in a particular business area and technical expert. The person is also expected to perform detailed analysis and system impact to ensure the successful delivery and support of the Koerber/HighJump application and should have worked on preferably two full implementations of Koerber/HighJump. **Essential Duties** + Lead the design, architecture, and support of the Koerber/HighJump application. + Write, code, test, and analyze the Koerber/HighJump application. + Perform detailed technical analysis and capable of documenting functional/technical requirements and system impact to ensure the successful delivery and support of various applications. + Conduct testing of programs and application integrations to ensure they will produce the desired information as per the technical and functional requirements. + Guides or directs work of others who may perform similar or related work. Serves as a mentor/developmental advisor and/or training resource to less experienced staff, providing an example with regard to quality of work + Works with stakeholders to guide the overall Koerber/HighJump technical direction and strategy of the IT department. + Perform other duties as assigned **Under This Roof We Require** + Bachelor's Degree Computer Science, Information Systems, or related majors. Required + 5+ years of IT experience; preferably in enterprise Business-to-Business durableable goods, construction, or building materials manufacturing, specifically Koerber\HighJump. + 10+ years' experience in systems analysis, data analysis, design and coding with proven record of successful large scale project implementations **Under This Roof We Also Value** + Technical Training Certification from Koerber\HighJump will be a plus **General Knowledge, Skills and Abilities** + Advanced problem solving skills + Ability to work on multiple complex assignments as a team member and team leader + Solid understanding and proven track record leveraging industry best practices and standards, ITIL, Agile and DevOps + Strong collaborative skills to work across multiple stakeholder groups + Ability to effectively communicate and report to different levels within and outside the IT Organization + Strong Vendor Management Skills **Qualifications Preferred** + HighJump Warehouse Advantage and Koerber one + HighJump Page Editor + HighJump Architect + Functional knowledge of Koerber/HighJump modules + Proficient in writing SQL scripts and stored procedures + Experience in maintaining and creating reports using SSRS + Ability to develop inbound and outbound interfaces + Database technology: MS SQL Server 2012+ Experience designing and managing Koerber/HighJump workflows + Koerber/HighJump security experience, application user accounts and AD integration + Experience customizing screens, creating custom applications and database changes + Experience validating patches to Koerber/HighJump and supporting software + Experience with Bartender label printing and/or MuleSoft is a plus + Experience with SAP ERP for integration is a plus + Knowledge of Information Security Awareness Consideration will be given based on geography, candidate experience, and qualifications. Annual Salary Range: 148,500-189,750 **How We Protect What Matters Most:** 1. We offer a wide range of health insurance options that include medical, dental, and vision for you and your family. 2. Our Family-Building benefits support the many different journeys to fertility and parenthood. 3. Our robust 401K plan includes an employer match contribution with your pre-tax and/or Roth contributions. 4. Other exciting programs and perks are available to help employees achieve work-life balance, including (but not limited to) a wellness program, free financial coaching, a referral program, and product rebates when purchased for an employee's primary residence. 5. Professional growth and development are very important to us! We offer internal training programs and courses, as well as a generous tuition reimbursement program. 6. We put diversity and inclusion into action with our Employee Resource Groups, which unite employees based on common perspectives, identities, demographic factors, or out of a desire to be an ally. GAF complies with federal, state, and local disability laws and makes reasonable accommodations for applicants and employees with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact HR Services at 833-HR-XPERT. We believe our employees are our greatest resource. We offer competitive salary, benefits, 401k, and vacation packages for all full time permanent positions. We are proud to be an equal opportunity workplace and GAF, Standard Logistics, SGI, and Siplast are proud to be affirmative action employers. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. If you have a disability or special need that requires accommodation, please let us know. If applying for positions in the U.S., must be eligible to work in the U.S. without need for employer sponsored visa (work permit). Privacy Policy (******************************************************************** **CA Privacy** Applicant Notice (****************************************************************************** With 130+ years in the industry, GAF is the leading roofing manufacturer in North America. As a member of the Standard Industries family of companies, we are also part of the largest roofing and waterproofing business in the world. Our communities help give our work meaning and the products we manufacture help protect what matters most. The shingles help to shelter the families living in the homes in our towns. The TPO helps protect what is under that hospital's roof. In addition to quality products, we make sure they are installed by quality craftsmen and women. The full GAF portfolio of solutions is supported by an extensive national network of factory-certified contractors. GAF continues to be the leader in quality and offers comprehensive warranty protection on its products and systems. Our success is driven by a commitment to empowering our people to deliver advanced quality and purposeful innovation and the desire to protect what matters most.

Project Engineer ***Work Location: Minot AFB (Minot, ND)*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities: Responsible for overseeing all aspects of construction projects, from planning to execution and closeout. Managing and overseeing project plans, schedules, and budgets Coordinating with architects, engineers, and contractors to ensure project milestones are met; serving as a primary point of contact for clients and stakeholders, communicating project progress, issues, and resolutions effectively Performing documents review of contract documents for schedule compliance and reasonability. Identifying potential risks and developing mitigation strategies; ensuring compliance with legal and regulatory requirements Implementing quality control measures to ensure work meets specifications and standards Conducting regular inspections and audits to identify and address quality issues Reviews and analyzes contractor plans and technical submittals for approval action, including progress schedules, environmental, safety and quality control programs, certifications and shop drawings. Prepares correspondence regarding Contractor performance, Requests for Equitable Adjustments (REAs), Requests for Information (RFIs) and other technical issues. Assisting with hosting site visits and giving presentations to owner's representatives. Providing guidance, mentoring, and training to team members; overseeing contract negotiations, administration, and compliance, resolving disputes and issues related to contracts Monitors scheduled progress of all construction activities and phases of construction and advises the Resident Engineer, COR, and project team of potential slippage or delay Prepares both partial and final payment estimates including the measurement and computation of pay item quantities, verification of materials on hand, and percentage complete of lump sum items. Produce monthly project reports displaying project status and updates for customers Participates in all phases of the contract modification process. Assists in preparation of scopes of work for RFP's, assists in preparation of government estimates, assists with reviews of contractor's proposals, and prepares contract modification documentation. Attend and participate in meetings with customers and contractors. Performs other duties as assigned Education/Experience: Bachelor's Degree in Engineering, Construction Management, Architecture, or related field Minimum 10 years Construction Project Management experience PMP certification is preferred. Experience with Federal Construction projects, particularly USACE, is preferred. Strong background in Project Management (PM), with the ability to lead and motivate teams to achieve project goals Strong interpersonal and presentation skills are required Strong technical competencies to create presentation materials and deliver presentations via electronic methods. Benefits: Competitive salary based on experience. Comprehensive health, dental, and vision insurance. Retirement savings plan with company match. Paid time off and holidays. Professional development and career advancement opportunities. A supportive and collaborative work environment. Equal Opportunity Employer (U.S.) all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity, or any other characteristic protected by law. Accura uses E-Verify in its hiring practices to achieve a lawful workplace. *******************

Senior Water Resource Engineer Responsibilities: Responsibilities include project management and design of irrigation and water resource engineering projects, NEPA permitting, engineering report writing, construction management; and coordination with other engineering staff, suppliers, contractors, and clients. The candidate must have a proven track record of marketing, building strong relationships, securing work with potential clients, and providing exceptional project delivery to existing clients. The candidate should be known in industry-affiliated professional organizations and groups and have a solid track record of managing internal technical teams and managing projects to profitability. Requirements: Qualified candidates will have a BS/BA in Engineering or related degree and a minimum of 10+ years of experience in irrigation design and/or water resource related fields. Additionally, a Professional Engineering (P.E.) license in the state of Montana, Idaho, and/or Washington, or the ability to be licensed in those states within six months, is required. Overseeing and managing tasks/projects and clients' expectations to scope, time, and budget goals for the planning, design and construction of infrastructure projects as well as creating construction documents, specifications and handling construction oversight/administration. Ability to work independently as well as in a collaborative team environment; offer constructive feedback and direction to support goals. Excellent work ethic and a comprehensive understanding of engineering principles. Benefits and Compensation: Competitive Salary Bonus Time for Billable Overtime Hours Bonus Opportunities Traditional & Roth 401k plans with Immediate Company Match Paid Health Insurance for Employee (Medical, Dental, Vision) Paid Life Insurance Paid Short & Long-term Disability Insurance Paid Holidays Paid Sick & Vacation Time Family-Oriented Environment Student Loan Repayment Program First-time Home Buyers Program Primary Location: Billings, MT Other Location(s): Coeur d'Alene ID, Boise ID, Great Falls MT, Helena MT, or Spokane WA Schedule: Full-time Kodi Miller (Miss) Talent Scout AKP Recruiting kodi@akprecruiting.com www.akprecruiting.com Josh May President AKP Recruiting (406) 633-1654 josh@akprecruiting.com www.akprecruiting.com

For over 60 years, DOWL has thrived as an established, highly reputable, professional services consulting firm, recognizing that the foundation of our past, present, and our future is our people. DOWL's foundation is built upon four core values: Inclusion, Integrity, Innovation, and Inspiration. These values are rooted in everything we do. As a valued partner on our team, you will be one of the People Who Make It Happen! Summary This is a full-time, regular position to assist with comprehensive airport related engineering and design of airport improvement projects and other airport and aviation related projects such as airport layout plans, airport master plans, aviation system plans, and airport environmental assessments at airports ranging from small general aviation to commercial international airports. Work includes design, plan production, AutoCAD Civil 3D design, research, analysis, technical writing, public involvement assistance, and associated design services primarily for airport projects, but sometimes also for other transportation and community planning and design projects. All airport design and planning efforts must be completed in accordance with applicable FAA regulations, requirements, orders, and advisory circulars. Job Responsibilities and Duties To be successful in this position, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Software * Microsoft Office (Outlook, Word, Excel) - Proficient * Market Sector Software (AutoCAD Civil 3D, AviPlan, FAARFIELD 2.0, ADIP/AGIS preferred) - Developing Technical Expertise * Intermediate understanding of technical fundamentals * Performs moderately complex design tasks independently * Effectively divides projects into individual tasks * Leads technical effort on small projects * Performs quality control on basic deliverables Teamwork Team player who is able to follow on large, complex projects and lead a small team on simple tasks. Anticipates the needs of other technical disciplines and takes responsibility for results. Project Delivery Produces the following independently: * Engineer's design report * Construction quantity calculations and cost estimates * Project plans * Project specifications * Construction safety and phasing plans * Airport Layout Plan development * Other technical reports, memos, and design documents Understanding Budget and Schedule Strong understanding of scopes, schedules, and budgets. Demonstrates ability to predict and deliver individual tasks within a set level of effort. Consistently meets budget and schedule expectations on projects. Industry Standards and Regulations Proficiently select from and employ the following design codes: * FAA advisory circulars * FAA orders and engineering briefs * State-specific standard specifications Client Interaction Frequent client communications. Resolves issues on small projects. Attends client meetings. Consistently uses situationally appropriate communication tools (e.g., email versus phone versus in-person). Other Other duties as assigned. Level of Work/Accountability Performs moderate to advanced levels of technical work on larger and more complex projects as assigned. Operates with a moderate level of autonomy. Work is reviewed by others. May assist with some project management tasks. Supervisory Duties None Education and/or Experience * Bachelor of Science in Civil Engineering required * Years of experience required: 4 years * Years of experience required with advanced degree: 3 years Certificates, Licenses, Registrations * PE required * Must have a valid driver's license and a good driving record Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the employee is regularly required to sit. The employee is required to talk and hear. The employee is regularly required to stand, walk, and use hands. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this position include close vision and ability to adjust focus. Position may include periodic site visits and inspection work on project sites. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Geographical locations are taken into consideration with respect to compensation. Geographical locations are taken into consideration with respect to compensation.