Automatically Apply For Jobs With Zippi

Upload your resume to get started.

Electronics Technician skills for your resume and career

Updated January 8, 2025

4 min read

Quoted Expert

John Irwin EdD

Below we've compiled a list of the most critical electronics technician skills. We ranked the top skills for electronics technicians based on the percentage of resumes they appeared on. For example, 6.3% of electronics technician resumes contained hand tools as a skill. Continue reading to find out what skills an electronics technician needs to be successful in the workplace.

15 electronics technician skills for your resume and career

1. Hand Tools

Here's how electronics technicians use hand tools:

Utilized hand tools, technical manuals, electronic formulas and discrepancy documentation to ensure top performance of complex equipment.
Used test equipment and hand tools to repair electrical/electronic communication systems and subsystems.

2. RF

Here's how electronics technicians use rf:

Maintained electronic equipment for Marine Air Traffic Control Facility to include; Navigational Aids, RF Communications/Telecommunications, and Weather systems.
Maintained and Repaired several electronic components used for the acquisition and dissemination of Radio Frequency (RF) Telemetry Signals.

3. Ladders

Here's how electronics technicians use ladders:

Installed Category 5E, Fiber and RG6 coaxial cables, following proper safety procedures when using ladders and other tools.
Build and Install radio communications racks, cable ladders, grounding/ lightning protection systems.

4. Preventive Maintenance

Here's how electronics technicians use preventive maintenance:

Travel nationwide conducting preventive maintenance and calibration on automatic tank gauging systems on all DESC capitalized fuel systems on military installations.
Helped provide preventive maintenance on radar and communication equipment and troubleshoot multiple electronic equipment while on a naval air station command.

5. Oscilloscopes

An Oscilloscope or simple O-scope refers to a laboratory tool or instrument that is designed mainly for the purpose of analyzing and determining the waveforms of a particular electronic signal. This device uses a graph of signal voltages that function in real-time to monitor the signal and diagnose if an electric circuit is blinking or functioning correctly.

Here's how electronics technicians use oscilloscopes:

Calibrated, troubleshooted and repaired professional electronic test equipment: oscilloscopes, oscillators and pulse generators.
Utilized a wide array of test equipment including oscilloscopes, signal generators, and communications monitors.

6. PLC

Here's how electronics technicians use plc:

Converted Antiquated relay logic controlled machinery over to PLC controlled machines.
Utilized personal computer to troubleshoot/repair manufacturing equipment that was PLC controlled.

Choose from 10+ customizable electronics technician resume templates

Build a professional electronics technician resume in minutes. Our AI resume writing assistant will guide you through every step of the process, and you can choose from 10+ resume templates to create your electronics technician resume.

7. Circuit Boards

A circuit board refers to an electronic device used to offer mechanical support and connect components electrically using signal traces and conductive pathways.

Here's how electronics technicians use circuit boards:

Performed sub-assembly of electronic components on circuit boards and assembly of motor relays and transformers with extensive hand soldering of components.
Assembled printed circuit boards into electronic control units Performed surface mounted soldering Repair of printed circuit boards in order to optimize reliability

Select Skills To Add To Your Resume

Hand Tools

Ladders

Preventive Maintenance

Oscilloscopes

PLC

8. Computer System

Here's how electronics technicians use computer system:

Perform telecommunication work involving the development of plans, requirements analysis, and solutions for data communications and computer systems networking.
Perform Electronic troubleshooting on Bio-Medical Computer systems and bench circuit boards level repair using system drawings and Electronics circuit schematics.

9. Analog

An analog system refers to a system that uses continuously variable signals.

Here's how electronics technicians use analog:

Applied troubleshooting techniques to diagnose and localize malfunctions to specific avionic and electronic components including analog and digital subsystems.
Repair to component level analog, digital based equipment-panels-devices for the Boeing Corporation and other major commercial airline carriers.

10. Electrical Systems

Here's how electronics technicians use electrical systems:

Produce method statement and risk assessment document for the removal and installation of cubicles and other electronic/electrical systems.
Performed preventive maintenance on solar panel sites that controlled various military communication and electrical systems.

11. Technical Support

Technical support or tech support are the services provided by any hardware or software company to users. They help in solving the technical difficulties the customers face with their products or services. Moreover, the tech support employees maintain, manage, and repair the IT faults. They are also responsible for resolving the network problems, installing and configuring hardware and software.

Here's how electronics technicians use technical support:

Provided technical support/troubleshooting for custom communications products
Provided technical support on the installation, configuration, application and repair of products and systems to customers at operational locations.

12. Technical Knowledge

Technical knowledge refers to the expertise and understanding of an in-depth or specific procedure or product. Much of the technical knowledge gained while in a position allows an individual to better complete a task or assist others attempting to complete the same task. For example, an employee may have extensive technical knowledge on repairing a piece of machinery or how to repair a server error.

Here's how electronics technicians use technical knowledge:

Range of assignments included local/state/federal government buildings which required extensive technical knowledge in order to implement their security requirements and schedules.
Provided technical guidance and assistance to lower-grade technicians and provided assistance to engineers based on technical knowledge and experience.

13. Control Systems

Here's how electronics technicians use control systems:

Diagnosed and isolated component malfunctions in electrical, electronics, instrumentation, and control systems using schematics and appropriate test equipment.
Experience with security monitoring and control systems, building automation systems, electronic life safety systems, and energy management systems.

14. Schematic Drawings

Here's how electronics technicians use schematic drawings:

Assisted the company by becoming more knowledgeable in using schematic drawings and diagrams, and electronic testing equipment efficiently and accurately.
Designed interface adapter circuitry for automated test equipment and created schematic drawings using ORCAD.

15. Electronic Test Equipment

Here's how electronics technicians use electronic test equipment:

Utilized schematic/wiring diagrams, electronic test equipment and engineering/OEM specifications to quickly resolve equipment malfunctions and locate discrepancies with minimal downtime.
Performed corrective and preventative maintenance on multiple electronic systems to include communication systems, RADAR systems, and electronic test equipment.

12 Electronics Technician Resume Examples

Build a professional electronics technician resume in minutes. Browse through our resume examples to identify the best way to word your resume. Then choose from 12+ resume templates to create your electronics technician resume.


Nicholas Martin Electronics Technician Contact Information El Segundo, CA (710) 555-4641 nmartin@example.com Skills • Communications Equipment • Surface Mount • Transmission Lines • Electronic Equipment • F/A-18 • Routine Maintenance • Quality Control Tests • Setup • Hand Tools • Clearance Employment History Electronics Technician 2019 - Present Northrop Grumman El Segundo, CA • Operated under Government contract with Security Clearance on the installation, testing. • Perform Environmental testing and screening on all shipping hardware. • Worked with Main Frame Computer Systems Tested and Assembled Hardware Troubleshooting and problem solving Avionics Electronics Technician 2013 - 2019 Gulfstream Aerospace El Segundo, CA • Perform ASCs and installation Cabin Management, SATCOM, Communication, and Navigation systems. • Assist in functional testing and troubleshooting of avionics/electrical systems according to test specifications • Perform routine and non-routine maintenance to all Gulfstream type aircraft systems, specializing in aircraft electrical systems, including Avionics modifications. • Performed training with personnel for requested and required OJT instruction, training, andqualifying on aircraft systems and equipment. • Participated in safety forums and volunteered for the Emergency Response Team. Aviation Electronics Technician 2003 - 2013 Northrop Grumman El Segundo, CA • Maintain and repair various pieces of electronic assemblies that make up military electronic warfare systems. • Experience using multimeters, power supplies, signal generators, frequency counters, and oscilloscopes. • Installed, tested certified, repaired, and modified wave guide and radar systems. • Position required an active Secret security clearance • Use of test instruments such as oscilloscope, multimeters, logic analyzer R.F. • power meter, spectrum analyzer, computers, power supplies, Calibrators, pulse generator, power meter, digital oscilloscope. Education Associate's Degree Electrical Engineering 2001 - 2003 University of Southern California Los Angeles, CA


Janice Riley Electronics Technician Contact Info Houston, TX (880) 555-1942 jriley@example.com Skills Safety ProceduresQCCommunicationSales FloorElectrical SystemsTechnical KnowledgeTest EngineersSurface MountDiagnosisHand Tools Employment History Electronics Technician 2020 - Present Texas Instruments Houston, TX • Preformed new equipmentinstallations and set up, characterization and qualifications. • Maintain ship-to-ship communication via satellite Plot courses for navigation of submarine (USN SSN Navigator Certification) Top Secret clearance Honorable Discharge • Qualified new equipment and new processes for production. • Operated assigned communication equipment or manned Voice/Video consoles in support of launches or stands-by for emergency trouble clearance. Electronics Supervisor 2019 - 2020 Walmart Houston, TX • Help customers make an informed decision based on their needs and wants with the best product knowledge. • Set up Verizon Wireless contracts, activate phones, ensure that all electronic transactions go smoothly. • Utilized proprietary computer system to handle cell phone accounts. Diagnostic Technician 2017 - 2019 Comcast Alpharetta, GA • Trained and passed all tests to become Commtech 3, which focuses on TV, Internet, and Phone, services. • Worked as cable, telephone and internet technician for subcontractor mainly in Southern New Jersey. • Provide phone support to Comcast customers with TCP/IP issues trying to access the internet. • Climbed poles / ladders and operated necessary hand tools meters and vehicles as required. • Install service and repair cable X1 phone and internet customer service maintain vehicle complete jobs in a timely fashion • Splice cables, using hand tools, epoxy, or mechanical equipment. Education Associate's Degree Electrical Engineering 2015 - 2017 Georgia Institute of Technology North Atlanta, GA


Anthony Dunn Electronics Technician Washington, DC adunn@example.com (580) 555-0934 Experience Electronics Technician 2020 - Present United States Department of DefenseWashington, DC • Tested and aligned HF, VLF and SHF microwave communications equipment. • Used and maintained hand tools such as screwdrivers, drills, wrenches, soldering irons, and micro soldering units. • Serve as internal quality auditor (ISO 9000). • Completed testing on wiring and electrical systems. • Provide leadership and technical assistance for other associates. Electronics Engineer 2013 - 2020 Lockheed MartinWashington, DC • Circuit design and engineering changes using CAD programs and hand written. • Prepare tolerance studies, stress analysis, and worst-case analysis of RF / photonic hardware utilizing MathCAD and EXCEL. • Analyzed RF coax loss and signal mismatches, which resulted in improved signals. • Performed testing in the System Integration Lab to verify proper equipment operation. • Provided hardware selection specifications and recommdations for PCIe bused hardware signal conditioning equipment. • Designed calibration procedures to mil-standards on environmental chambers in order to maintain optimum performance on production hardware for Lockheed Martin. Diagnostic Technician 2009 - 2013 Jiffy LubeRichmond, VA • Greet customers,Vacuums car, replaces window sticker, cleans windows, check tire pressure. • Change oil, rotate tires, and provide customer service. • greet customers, vacuum interior of vehicles and wash windows 3. • Understand federal, state and local regulations, including hazardous waste disposal, OSHA Right-to-Know, etc Assistant to a UPS driver • Conducted oil changes, tire rotation and inspections of customer vehicles. Skills UL Pacs Labview Missile Order Parts IV Product Development ECG System Integration Electrical Systems Education Associate's Degree Electrical Engineering 2007 - 2009 University of North Carolina at GreensboroGreensboro, NC


Sean Hayes Electronics Technician Employment History Electronics Technician 2019 - Present Baxter InternationalOakbrook Terrace, IL • Install electrical and electronic parts using soldering equipment and hand tools. • Performed ordnance removal at Carroll Island, APG, MD in OSHA level B. • Perform inspection and repairs on control systems. • Acquired a Top Secret Security Clearance for the possession of our nation's sensitive cryptic devices and communication equipment. • Assist Registered Nurses and physicians with emergent patient care. Electronics Warfare Technician 2016 - 2019 Motorola SolutionsOakbrook Terrace, IL • Generated and tracked Engineering change orders based on hardware debug and troubleshooting. • Surface mount and through hole soldering and troubleshooting. Test Operator (Part-Time) 2015 - 2016 CaterpillarOakbrook Terrace, IL • Worked on the assembly line Assembled parts Drove forklift when necessary • Conducted quality checks to ensure product remained within technical specifications identified in production blueprints and plans. • Perform bring up, functional, system test, burn-in and audit test with the circuit board. • Assist the factory supervisory in managing assembly lines of the unit efficiently Perform product manufacturing tasks on assembly lines. Education Associate's Degree Electrical Engineering 2014 - 2016 DeVry UniversityOakbrook Terrace, IL Contact Information Oakbrook Terrace, IL (980) 555-4262 shayes@example.com Skills Electronic Countermeasures Radar Trouble Shooting ICT Prototype Quality Checks Oscilloscopes Assurance Osha Troubleshoot


Austin Gardner Electronics Technician Islandton, SC (510) 555-4880 agardner@example.com Skills Loss Prevention Aircraft Systems Printers Stock Shelves EMI R Troubleshoot Instruments Airframe Electronic Equipment Hazardous Materials Employment History Electronics Technician 2013 - Present USDAIslandton, SC • Interpreted cable / hardware schematics in order to produce cable and wire assemblies to specification. Electronics Supervisor 2012 - 2013 United States MarineIslandton, SC • Wire, Assemble, Troubleshoot, Repair, test RF and GPS units. • Maintained security operations for products on the sales floor, Report Inventory Count of the products sold in the department. • Assembled and tested a variety of RF tube sealers for a medical products company. • Test equipment includes an oscilloscope, HP logic analyzer, multimeter, Hipot Tester, and a microscope. • Provided Electronic Warfare and Anti-Ship Missile Defense services during 3 ship borne deployments to the Med and Arabian Gulf. Aviation Electronics Technician 2007 - 2012 United States MarineIslandton, SC • Maintained and repaired communications systems, navigation systems, radar systems and electronic countermeasures systems. • Performed component level troubleshooting and repair on various aviation radio and radar equipment while keeping meticulous records of all maintenance actions. • Used circuit testers, voltmeters, hand tools, power tools and soldering irons. • Performed daily, turnaround, and preflight inspections on squadron aircraft. • Maintain, troubleshoot the navigation, aircraft computers, radar, and communication systems. • Performed oversight of maintenance, managed aircraft workloads and documentation, and inspected electronic and electrical systems maintenance. Education Associate's Degree Electrical Engineering 2005 - 2007 Purdue UniversityWest Lafayette, IN


Adam Gonzales Electronics Technician Troy, NY (420) 555-9095 agonzales@example.com Experience: Electronics Technician IBM Troy, NY 2017 - Present • Provided new product development and qualification engineering on power and battery assemblies used in computer and storage systems. • Circuit board inspection, test and repair.Repair surface mount and pin in hole components.Trace repair. • Tested Server hardware Built Mainframe Computers for testing Installed software on mainframe computer hardware Provided quality control testing • Ensured correct product flow by tracking hardware and logistical control systems. Electronics Supervisor Best Buy Troy, NY 2011 - 2017 • Prepared the sales floor team to pass the MECP test as well. • Conduct employee training in equipment operations or work and safety procedures, or assign employee training to experienced workers. • Provided sales floor leadership for department, and through certain hours for the rest of the store. • Reorganized the sales floor to meet company demands. • Developed strategic business plans to achieve business results which met and exceeded company expectations. • Shared product knowledge with fellow employees. Aviation Electronics Technician Quality Systems Troy, NY 2008 - 2011 • Coordinated set up multiple events for an entire squadron of about 500 Marines. • Diagnosed and repaired complex Radar, ESM, and SRS aircraft systems. • Diagnosed and repaired radar systems for various military aircraft. • Maintained, Repaired and Programmed Microwave Radar Type System EW pods capable of Simulation and Jamming. Skills • Facility • Linux • Electronic Repair • Safety Procedures • Oscilloscopes • Aircraft Systems • Order Merchandise • Business Development • UHF • Clearance Education: Associate's Degree Rensselaer Polytechnic Institute Troy, NY 2006 - 2008 • Major: Electrical Engineering


Diane Hughes Electronics Technician Rochester, NY (840) 555-6466 dhughes@example.com Experience: 2017 - Present Electronics Technician / Harris / Rochester, NY • Support the RF/Antenna Engineering Department responsible for development of new RF satellite components. • Tested and tuned RF subassemblies used in military and commercial satellites. • Analyze all failures determining whether they are hardware or software issues finding the fix for these issues. • Design and construct test fixturing used in the compliance and environmental testing phase of new space based RF platforms. • Operated test equipment to include power meters, oscilloscopes, signal generators, counters, pulse generators. 2014 - 2017 Electronics Technology Instructor / ESL Federal Credit Union / Rochester, NY • Develop lesson plans and find supplementary materials for multi-level ESL classes. • Aided international students in preparing standardized tests including TOEFL and ACT online • Posted grades and homework assignments using online system. 2013 - 2014 Engineering Aide / Merck & Co. / Main, PA • Supervised two installation supervisors, 22 mechanics and three CAD operators. • Produced mechanical designs using CAD; accountable for approximately 15 project engineers daily. • Gained experience in project management, P&ID verification, shut down coordination, and routine maintenance. Skills: Engineering Drawings, Engineering Support, Engineering Technology, Clearance, Special Education, New Equipment, BOM, RF, Evening Classes, Motor Control Education: 2010 - 2013 Bachelor's Degree Electrical Engineering / Pennsylvania State University / Main, PA


William Stephens Electronics Technician Poughkeepsie, NY \| (920) 555-5175 \| wstephens@example.com Work Experience Electronics Technician, IBM - Poughkeepsie, NY 2018 - Present Support multiple client applications in windows, unix, critix environment. Used a variety of hand tools and soldering equipment. Analyzed and recorded test results, and prepare written testing documentation. Adjusted, repaired, or replaced malfunctioning components or assemblies, using hand tools or soldering irons. Electronic Development Technician, General Electric - Owego, NY 2009 - 2018 Document all test fixtures from schematic entry to prototype verification. Design testing facility installations and upgrades. Work with oscilloscopes, function generators, power supplies and multi-meters. Prepared and presented weekly test results to engineers at international conferences. Aviation Electronics Technician, Lockheed Martin - Owego, NY 2006 - 2009 Installed complete RADAR components and fixed array antennas. Worked with engineers on design changes to electrical systems to insure reliability and adherence to FCC and military regs. Operated test instruments, such as multi-meter, oscilloscope, oscillator and electronic voltmeter. Perform many classified type operations with top level clearance. Skills CMP, Capacitors, Uh-1N, P-3, Support Equipment, Engineering Department, Airframe, Computer System, Hardware, Aircraft Systems Education Associate's Degree Electrical Engineering 2004 - 2006 Rensselaer Polytechnic Institute - Troy, NY


Jane Jordan Electronics Technician Moorestown, NJ (860) 555-9735 jjordan@example.com Experience Electronics Technician, CARDONE Industries, Moorestown, NJ 2011 - Present • Documented measurements and used multiple test equipment included HP Signal Dynamic Analyzer for FFT measurements using Visual Basic 6. • Use a build of materials or B.O.M to build GM Concept and prototype Vehicles for testing • Greet customers , Vacuum cars wash windows check air pressure on tires • Trouble shooting car problems as well as using various Air tools. Electronics Technician, Motorola Solutions, Moorestown, NJ 2007 - 2011 • Provided hardware technician support for engineering builds. • Repaired RF receivers, transmitters, power amplifiers and other RF circuit board modules. • Configured hardware, formatted drive and loaded software, test and burn-in customized Super-computer systems to customer specifications. Digital Technician, Lockheed Martin, Moorestown, NJ 2005 - 2007 • Trouble shooting various issues with completed builds. • Lead and performed 30 new IT hardware install and upgrades of Time Based Flow Management systems (TBFM) projects. • Maintained a high security clearance with the department of defense. Skills • Communication • Ethernet • Customer Service • RF • File Management • Photoshop • Test Equipment • High Volume • Windows • Analytics Education 2003 - 2005 Associate's Degree Electrical Engineering Technology, New England Institute of Technology East Greenwich, RI


Kathryn Shaw Electronics Technician Indianapolis, IN \| (260) 555-5624 \| kshaw@example.com Employment History: Raytheon - Indianapolis, IN 2018 - Present Electronics Technician • Record test results and entered data for each process. • Experienced with test equipment such as oscilloscopes, spectrum analyzers and digital volt meters. • Attained Secret Clearance for employment opportunity. • Take test readings using common instruments such as digital multi-meters, signal generators, semiconductor testers and oscilloscopes. Aerotek - Indianapolis, IN 2017 - 2018 Refurbish Technician • Configured desktop/workstations hardware software/operating systems and worked with the system administrator to reslove computer network issues. • Assign and configure TCP/IP address, install all software by MIS. • Make repairs and replace defective parts. • repair, and configuration of Toshiba laptops. The AME Group - Vincennes, IN 2016 - 2017 Hardware Technician (Part-Time) • Suggested hardware and software changes where applicable. • Fixed hardware on a component level Troubleshot and resolved hardware issues Contacted customers to troubleshoot their problems and repair their devices • Provided first and second level support of software and hardware Technical Assistance Center (TAC) calls. • Image servers with Linux or Windows package. Skills: Setup, Satcom, Active Directory, Peripheral Equipment, General Maintenance, Hardware, UL, Refurbishment, Electronic Assemblies, Electrical Systems Education: Vincennes University - Vincennes, IN 2014 - 2017 Bachelor's Degree Electrical Engineering Technology


Judy Murray Electronics Technician phone(250) 555-6270 addressAlbuquerque, NM emailjmurray@example.com Experience 2019 - Present Electronics Technician Intel · Albuquerque, NM • Monitored lab environment for compliance with safety protocols; maintained lab equipment and facilities. • Participated in safety forums and volunteered for the Emergency Response Team. • Tested and troubleshot submarine communications equipment. • Obtained and maintained Sensitive Compartmented Information (SCI) Secret level security clearance. • Trained in military specification soldering through hole and surface mount components. • Received specialized training in the set up and break-down of military communications equipment. 2018 - 2019 Electronics Technician Intel · Albuquerque, NM • debug of test failures on Linux, Windows & Android Linux kernel custom operating systems. • Coordinated activities with team members and performed daily wipe-downs of test equipment and workstations in accordance with maintenance procedures and protocols. • Partnered with mechanical engineers and assemblers to produce hardware designs and purchase/assemble components. • Top Clearance for Naval jobs Worked on computer systems for the Pentagon, NOAA and the Naval Command Center 2016 - 2018 Electronics Repair Technician Bigston · Oakbrook Terrace, IL • Fixed hardware and software issues on customer workstations. • Inspected replacement parts for damage and verify that part were correct. • Evaluated, trouble shot modules to component level. Skills • Navigation Systems • Support Equipment • Clearance • Oscilloscopes • Defective Parts • Digital Multi-Meters • Schematic Diagrams • RF • Hvac • Control Systems Education 2014 - 2016 Associate's Degree Electrical Engineering Technology DeVry University · Oakbrook Terrace, IL


Kevin Baker Electronics Technician phone:(740) 555-2012 email:kbaker@example.com address:Aurora, CO Employment History Electronics Technician 2017 - Present Raytheon · Aurora, CO • Performed tests on military electronic equipment. • Hired to wire cabling for highly sensitive radar systems. • Design engineering support in debugging and functionality check. • Utilized multimeters, oscilloscopes, waveform generators and spectrum analyzers to troubleshoot and repair all types of telecommunications systems and subassemblies. • Maintained a Top Secret Clearance and was responsible for security matters dealing with classified material. Control Systems Technician 2015 - 2017 Firestone Complete Auto Care · Bloomingdale, IL • Perform Routine Vehicle Services on Customer Vehicles Unload, Inventory, and Stock Warehouse Deliveries • Communicate clearly and quickly with service manager.OSHA safety regs. • Diagnose and repair all process control systems (Device Net, Ethernet, Data Highway, Industrial Vision Systems). • Install Windshields, Handle Customer Service, Travel to customers, fill out tickets about the job, maintain equipment. • Maintained Advanced Combat Direction System equipment while onboard U.S.S. Diagnostic Technician (Part-Time) 2010 - 2011 AT&T · Los Angeles, CA • Use interpersonal communication techniques 39. • Installed and activated U-verse integrated digital TV, high speed Internet, and voice over IP services. • Contributed to restoration of major communication outages, while driving customer satisfaction in a team effort. Skills Computer System Technical Knowledge Cctv DCS Facility Ethernet Function Generators Customer Service RN Troubleshoot Education Doctoral Degree Electrical Engineering 2012 - 2015 Purdue University · West Lafayette, IN Master's Degree Electrical Engineering 2011 - 2012 Purdue University · West Lafayette, IN Bachelor's Degree Electrical Engineering 2008 - 2011 University of Southern California · Los Angeles, CA

Create My Resume

Build a professional resume in minutes using this template.

What skills help Electronics Technicians find jobs?

Tell us what job you are looking for, we’ll show you what skills employers want.

What Electronics Technician skills would you recommend for someone trying to advance their career?

John Irwin EdD

Chair, Manufacturing and Mechanical Engineering Technology, Professor, Mechanical Engineering Technology, Michigan Technological University

They like that the job market is very strong. Companies that are implementing industry 4.0 technologies are in need of Engineering Technology graduates because they are well prepared to meet these challenges. Employers like their problem-solving and hands-on experience with modern industry tools. ET graduates with 4-yr degrees dislike that some company recruiters do not recognize them as engineers and confuse them with 2-yr associate degree technicians.

Do you want to know more?

List of electronics technician skills to add to your resume

The most important skills for an electronics technician resume and required skills for an electronics technician to have include:

Hand Tools
RF
Ladders
Preventive Maintenance
Oscilloscopes
PLC
Circuit Boards
Computer System
Analog
Electrical Systems
Technical Support
Technical Knowledge
Control Systems
Schematic Drawings
Electronic Test Equipment
Electrical Components
Windows

Verification Testing
PC
CCTV
Equipment Malfunctions
Test Procedures
Signal Generators
Test Data
Oscillators
PCB
Component Level Repair
Level Troubleshooting
Ac
Dc
Fiber Optic
Test Results
Corrective Maintenance
Engineering Drawings

R
Electronic Devices
Technical Manuals
Spectrum Analyzers
Power Meters
Electronic Circuits
Electronic Assemblies
Surface Mount
IP
GPS
Communications Equipment
Frequency Counters
Test Fixtures
Transistors
Transducers

Updated January 8, 2025

Zippia Team

Editorial Staff

The Zippia Research Team has spent countless hours reviewing resumes, job postings, and government data to determine what goes into getting a job in each phase of life. Professional writers and data scientists comprise the Zippia Research Team.

Updated January 8, 2025

Browse architecture and engineering jobs