Electrical Engineer Jobs in Hanover, MA

The Wind/Solar Engineer will play a key role in the technical evaluation, design optimization, and feasibility assessment of our wind and solar projects from early-stage development through construction and operations. The ideal candidate will have experience in both wind and solar technologies, a strong foundation in engineering principles, and familiarity with permitting requirements and project execution. Experience with construction and operations is a plus. Your responsibilities Development Support: Conduct technical evaluations of potential wind and solar project sites, including resource assessment, site constraints, and feasibility studies. Work closely with development, interconnection, and permitting teams to optimize project viability and performance. Support the design and layout of wind and solar projects, including turbine siting, panel orientation, and electrical system design. Assist in RFP preparation, EPC contracts, and equipment procurement. Engineering & Design: Perform technical due diligence for project acquisitions, including site visits, technology assessment, and operational analysis. Support the selection and evaluation of turbines, inverters, and balance-of-system components. Work with consultants and third-party engineers to optimize designs and ensure compliance with industry standards (IEC, IEEE, UL, etc.). Assist in grid interconnection studies and coordinate with utilities and ISOs for seamless integration. Construction & Operations Support (Preferred Experience): Provide engineering support during the construction phase, including reviewing technical submittals, site inspections, and troubleshooting. Assist in performance monitoring and optimization of operating assets, including root cause analysis of underperformance. Support the development of O&M strategies, warranties, and long-term asset management plans. Process & Innovation: Contribute to best practices and standard operating procedures for technical evaluations and project execution. Research emerging technology trends in wind, solar, and energy storage to enhance project competitiveness. Identify and mitigate project risks in collaboration with internal teams. Qualifications & Experience ✅ Bachelor's or Master's degree in Electrical Engineering, Mechanical Engineering, Renewable Energy, or a related field. ✅ 3-7 years of experience in wind and solar engineering, with a focus on project development. ✅ Strong knowledge of wind resource assessment, solar PV modeling, and energy yield analysis tools (e.g., WindPRO, OpenWind, PVSyst, Helioscope). ✅ Experience with GIS tools, CAD software, and power system modeling (ETAP, PowerWorld, or similar) is a plus. ✅ Familiarity with EPC contracts, procurement processes, and construction best practices. ✅ Understanding of grid interconnection, permitting requirements, and technical regulations in the renewable energy sector. ✅ Strong analytical and problem-solving skills, with the ability to interpret complex datasets. ✅ Excellent communication and teamwork skills. ✅ Willingness to travel to project sites as needed. Preferred Qualifications: ✔️ Experience in wind and solar construction & operations (performance monitoring, troubleshooting, asset management). ✔️ Knowledge of energy storage and hybrid project design. ✔️ Professional Engineer (PE) license or EIT certification is a plus. ✔️ Experience working with developers, utilities, and EPC contractors in the renewable energy sector. If you are passionate about renewable energy and want to be part of a dynamic, mission-driven company, we encourage you to apply! Greenvolt is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity / expression, national origin, disability, protected veteran status, or any other characteristic protected under national, provincial, or local law, where applicable, and those with criminal histories will be considered in a manner consistent with applicable state and local laws.

This role offers significant equity, and unfortunately visa sponsorship is not available for this role. I am currently working with a company pushing the boundaries of sensing and analytics to provide deeper insights into the world around us. By leveraging advanced technology, they enable new capabilities in monitoring, intelligence, and decision-making across various industries. Their innovative approach unlocks critical data that was previously difficult to access, driving better outcomes for businesses and society. Key Responsibilities: Define system specifications, calibration paths, and select components to meet performance goals. Design and develop wide-bandwidth, low-noise, and high-stability RF front-end components for remote sensing applications. Conduct performance analysis, including link budget calculations, noise figure analysis, and S-parameter evaluations. Create schematics and PCB layouts using industry-standard tools, ensuring compliance with best practices. Develop and integrate RF front-end components with RFSoC and USRP platforms, overseeing prototype fabrication and testing. Contribute to digital and power avionics subsystem development for airborne and drone-based payloads. Required Qualifications: Bachelor's or Master's degree in Electrical Engineering or related field. 5+ years of experience in RF/electrical hardware design, preferably in radar systems. Strong foundation in RF and microwave engineering, system performance analysis, and PCB design. Hands-on experience with RF test equipment and measurement techniques.

Must Have Degree Level Bachelor's Degree Yes Electrical/Electronics Analog and power electronic design 10 years Electronic Test Equipment 10 years Experience Experience with all types of laboratory instrumentation 10 years Signal Processing Signal Integrity 10 years Software Spice 10 years Testing Develop Test Plans 10 years Testing and Evaluation 10 years Nice to Have Degree Level Masters Degree Yes The Control and Autonomous Systems Engineering Group is focused on the synthesis of dynamic and complex control and autonomous systems, from concept to realization, for a wide variety of prototypes. Prototype applications span various mission areas, such as space control; air, missile and maritime defense; communication and tactical systems; homeland protection; and intelligence, surveillance, and reconnaissance systems. The group has expertise in dynamic stabilization and platform control; advanced autonomy; pointing, acquisition, and tracking; guidance; navigation and estimation; robotics; mapping; intra- and inter-system planning (e.g., swarming); demanding real- time embedded software and firmware control; image processing; machine learning; human-machine interaction; space-qualified electronics; and analog and power electronics. Applied research and development projects include space optical payloads, small satellites, airborne laser radars and imaging systems, and autonomous air, ground, and maritime systems. The Control and Autonomous Systems Engineering Group (76) is in need of an experienced Engineer I for development, review, and integration of electronic subsystems for a space-bound application. Onsite Design, development, and technical support utilizing experience in electronic systems hardware development for space-bound systems Participate in defining, describing and implementing program deliverables/functionalities. Required Skills: Experience with High-Reliability systems (aerospace, medical, nuclear, etc) in each of the following areas are required: 1. Circuit development for power conversion and distribution 2. Systems interconnect and integration design (including experience specifying system grounding requirements and signal integrity requirements) 3. Experience with EMC requirements (e.g., MIL-STD-461) and developing associated design requirements at the board-level through the system-level 4. Circuit analysis tools such as SPICE/PSPICE 5. Familiarity with all types of laboratory instrumentation, including oscilloscopes, function generators, meters, spectrum analyzers, and frequency counters. 6. Excellent interpersonal and communication skills. 7. The ability to work in a team-oriented environment. Preferred Skills: 1. Experience with radiation hardened systems 2. Familiarity with embedded systems development, including C and/or assembly language programming for hard real-time single-board computer applications. 3. All aspects of implementing electronic circuitry, including design and schematic entry using Mentor Graphics tools, board layout, parts selection, debugging, and documentation. 4. Test planning and execution for components, subsystems, and systems 5. Active DoD Secret or Top Secret is a plus Education: Bachelor's Degree is required. Master's degree preferred. - Interim clearance sufficient to start; will need to obtain TS clearance - Candidate will be predominantly onsite. Mostly 5 days per week but some flex to have one remote day as work permits. - Interview process: initial screening and then broader panel interview; if candidate is local, the second interview will a half day in person interview. If candidate is not local, the team will accommodate a zoom.

The primary function of this position is to support the electrical engineering efforts of the company, under the supervision of the Sr. Electrical Engineer, this person is responsible the electrical engineering throughout all phases of a project Work with the design team to ensure that established project deadlines and budgets are met Ensure a high quality of work and make sure all direction has been followed and coordinated throughout the project documents. Maintain NCEES Record and electrical Professional Engineering registrations in MA, NH, CT, and RI Conceptualize, design, and oversee construction of building electrical systems, including power distribution, lighting, control systems, communications, security and fire alarm systems Create detailed Construction Documents, including drawings and specifications Perform load calculations using EasyPower Develop construction cost estimates. Coordinate design with architectural, civil, plumbing, mechanical, and fire protection engineers Work with the Project Manager to provide construction administration services for electrical work Work with the Sr. Electrical Engineer and drafters to update and maintain the electrical AutoCAD library Coordinate with the Senior Staff to ensure latest design resources, such as codes, reference materials and codes. Required Qualifications: Candidates need to have a PE in CT or RI to seal their work; or a certified PE in another state including MA or NH where it will transfer easily (Client will pay for any new and/or PE license transfers) Candidates must be experienced in Commercial Building Services Microsoft Office suite and Bluebeam experience USPRO is an equal opportunity employer and will consider all applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, disability and/or other protected categories. We are also committed to providing reasonable accommodation(s) to qualified individuals with disabilities or needs, as required by law.

The Senior Electro-Mechanical Integration Engineer will be a part of the R&D organization and an important contributor to the realization of the next generation robotic platform that will change the future of healthcare. You will be a visible technical resource working on development of complex electro-mechanical assemblies. There will be direct contribution from prototype to verification builds and tests within a regulated medical device development environment. This role is suited for a hands-on, senior-level R&D engineer with multi-disciplinary knowledge (Mechanical, electrical, and Software) proficient in integrating complex electromechanical systems and experience in troubleshooting when needed, perform configuration management, manage component inventories, and advise on design improvements. Key Responsibilities: • Maintain and upgrade fleet of robotic systems for R&D development • Lead system configuration management to support system traceability for various R&D activities • Lead hands-on, disciplined system troubleshooting activities working closely with different engineering disciplines • Author relevant documents related to process improvements • Develop test methods, protocols, execute tests, prepare reports and release them via ECOs • Support system builds, inventory management, and procurement activities • Lead/support detailed planning (BOM, procurement, etc.) and the future builds. Qualifications: • 8+ years work experience in complex electromechanical system R&D environment • Bachelor's and/or Masters degree in Mechanical, Mechatronics, Robotics Engineering, Manufacturing Engineering, or a close field is desired. Associate's degree with exceptional experience is acceptable. • Experience in heavily-regulated industries such as medical device, or aerospace is required • Must have proven track record of hands-on experience in assembly and test of electro-mechanical systems • Ability to deconstruct complex problems into manageable components to derive effective solutions is required. • Must be proficient in fixture and process validation is required. • Must have experience in cross-functional collaboration and technical leadership • Must have experience in project management including task timeline estimation and work breakdown structures • Able to execute assigned projects and duties with minimal supervision • Outstanding documentation and communication skills required • Proficiency in using MS Office required • Knowledge of industry best practices for development of complex electromechanical systems • Previous experience in design transfer/new product introduction desired • Demonstrated CAD proficiency desired. Solidworks preferred • A working knowledge of DFM/A, Six Sigma, and statistical tolerance analysis is desired • Proficiency with Product Lifecycle Management PLM software and ECOs is desired • Develop production level and support documentation including bills of material (BOMs), assembly drawings, and maintenance instructions. • Proficient in developing test methods, protocols, performing tests and releasing relevant documentation. • Experience using, modifying, and programing in MATLAB Simulink or LabView is desired

Job Type: Full-Time About the Role: We are seeking a skilled RF Hardware Design Engineer with expertise in PCB hardware design and testing. The ideal candidate will have hands-on experience in RF, high-speed digital, and mixed-signal PCB design, along with a deep understanding of the full hardware design lifecycle-from specification through validation. Experience with 5G LTE design is highly desirable. Key Responsibilities: Lead the design and development of RF and high-speed digital PCBs, from concept to production. Develop and refine system specifications, block diagrams, simulations, schematics, and PCB layouts. Conduct engineering characterization, verification, and validation testing to ensure compliance with industry standards (EMC/EMI, Telcordia, NTIA, Safety/UL, 3GPP, etc.). Select and source RF components to meet system performance requirements. Perform necessary simulations and trade studies to optimize circuit performance. Drive PCB layout activities, preferably using Altium Designer. Utilize tools like Keysight Genesys / Pathwave and Ansys HFSS for RF circuit and PCB design. Set up and operate RF test equipment including signal generators, spectrum analyzers, vector network analyzers, and RF calibration tools. Develop and/or direct test automation for hardware characterization and verification using Python. Qualifications & Experience: B.S. or M.S. in Electrical Engineering or a related field. Proven experience in RF, high-speed digital, and mixed-signal PCB design. Strong familiarity with RF hardware testing, calibration, and characterization. Knowledge of pre-compliance testing regulations and industry standards. Experience with RF simulation software and PCB design tools (preferably Altium Designer). Proficiency in Python for test automation is a plus. Strong problem-solving skills and ability to work in a fast-paced development environment. Preferred Experience: Hands-on design experience in 5G LTE applications. Exposure to regulatory compliance standards for RF products. Previous work in telecommunications, wireless systems, radar, or related RF applications. Why Join Us? Opportunity to work on cutting-edge RF technologies. Collaborate with a team of highly skilled engineers in a dynamic environment. Competitive compensation, benefits, and career growth opportunities.

Dynamic role responsible for the management and production of building infrastructure design systems. Successful candidate will possess capability to work independently in order to complete the majority of projects managed, from proposal to close out, with limited assistance from a Senior Engineer or Director. Job Summary Support the electrical and lighting design of systems from various projects-including power systems, lighting, fire alarm, and other electrical components for buildings Ensuring that electrical designs meet building codes, safety standards, and regulations set by local authorities and that drawings and designs are in accordance with company production and design standards Working closely with architects, structural engineers, and other professionals to integrate electrical systems seamlessly into building designs. Incorporating energy-efficient technologies and practices into electrical designs to minimize energy consumption and environmental impact. Estimating the costs associated with electrical designs and ensuring that projects stay within budget constraints. Overseeing the testing and commissioning of electrical systems to ensure they function properly and meet performance requirements. Troubleshooting electrical issues that arise during the design, construction, or operation of buildings. Creating detailed drawings, specifications, and documentation for electrical systems to guide construction and maintenance activities. Keeping up-to-date with advancements in electrical engineering technologies, building codes, and industry standards. Perform construction administration and field investigation tasks for lighting, power and fire alarm systems Collaborate with Technical Leaders and Sr. Engineers to ensure adherence to WB standards and appropriate workload management and deviations in project scope or additional services Attend project meetings and site visits Qualifications Bachelor's degree in electrical engineering or similar Minimum equivalent of 5-7+ years of relevant professional experience Revit experience preferred, high proficiency in AutoCAD Comprehensive understanding of applicable design and building codes Provides a consultative approach to problem solving

Job Title: Electrical Engineer Onsite Requirements: Prepare design concepts, block diagrams, schematics, wiring diagram Cable/harness fabrication drawing SolidWorks or Zuken Job Description: Cable interconnect engineer in the Mechanical Engineering Group require little supervision and perform assignments with creative ability, resourcefulness, and originality. Engineer must take initiative and be thorough and detailed. They must work effectively with individuals from various groups and at many levels of the organization. They must also demonstrate effective communication skills. Education: BS in Electrical Engineering, or BS or Associates Degree in Engineering discipline plus 5 years of relevant experience in electrical interconnection design. Required Skills: Develop, design, and drive system and unit level electrical interconnection and power distribution schemes in collaboration with multidisciplinary project teams. Prepare design concepts, block diagrams, schematics, wiring diagrams, cable/harness fabrication drawings utilizing 2D and 3D CAD (Computer Aided Design) software. Perform basic design calculations and select appropriate components and hardware. Support part procurement, fabrication, and system level integration while reporting and maintaining program milestones. Preferred Skills: Possess knowledge of electronic design for aerospace applications, including connector selection, wire types/sizes/derating, voltage drops, electro-mechanical packaging, electrical fabrication, and assembly techniques. Possess knowledge of NASA, Military, ASME, and IEEE standards and specifications. Competency in SolidWorks and/or Zuken E3. Possess knowledge of PDM (Product Data Management) and/or PLM (Product Lifecycle Management) software. Others: This position is expected to be 100% onsite. However, future hybrid work arrangements may be possible depending on program needs. Interim clearance is acceptable upon start; secret clearance to remain on the project. Interview process: phone screen to start; then IN PERSON interview (unless candidate is relocating). Skill Matrix: Qualification Assessment Must Have Degree Level Yes Design Design and Evaluate Functional Systems 5 years Initiate block diagrams, schematics, cable drawings, wire diagrams/run lists, fabrication documents 5 years Performing basic design calculations 5 years Electrical/Electronics Cable Engineer 5 years Clear understanding of cable fabrication standards and processes 5 years Design and document system interconnects (cable and harness) and assemblies 5 years Power Distribution Methods 5 years Nice to Have Electrical/Electronics Zuken experience 0 years Software SolidWorks 3D Computer-Aided Design (CAD) 0 years ** 3rd party and subcontract staffing agencies are not eligible for partnership on this position. 3rd party subcontractors need not apply. This position requires candidates to be eligible to work in the United States, directly for an employer, without sponsorship now or anytime in the future. This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role. Due to the nature of the work, a United States Government Clearance is required to be eligible for the position. **

Hanna Instruments is seeking a skilled Hardware Test Engineer to join our dynamic R&D team in our Woonsocket, RI office. In this role, you will be responsible for developing, assembling, and executing comprehensive hardware tests for our sensors and instruments. You will design and build test fixtures, build and debug prototypes, and independently conduct testing to verify product reliability and performance. This role is full time on-site position. This position is ideal for someone with a strong background in electronics who thrives in a hands-on environment and enjoys problem-solving through practical application. Key Responsibilities: • Develop and Build Test Equipment: Design and assemble custom test fixtures to evaluate hardware performance and durability. • Independent Testing: Execute comprehensive test plans, record results, and provide detailed analysis to engineering teams. • Soldering and Assembly: Perform fine-pitch soldering (SMT and through-hole) to assemble prototypes and modify PCBs as needed for testing. • Troubleshooting: Diagnose and resolve hardware issues, providing feedback to design teams to enhance product quality. • Documentation: Maintain detailed records of test procedures, results, and design modifications. • Collaboration: Work closely with other engineers to ensure seamless integration of test feedback into product development cycles. • Compliance Testing: Ensure products meet industry standards and internal quality benchmarks. • Continuous Improvement: Proactively suggest improvements to test methods, tools, and processes. Qualifications: • Education: Associate or Bachelor's degree in Electronics Engineering, Electrical Engineering, or related field. Equivalent hands-on experience will be considered. • Must be able to work full time in our Woonsocket, RI office. Experience: • 3+ years of experience in hardware testing or electronics manufacturing. • Proven ability to build and execute hardware tests independently. • Experience with designing and building custom test fixtures. Technical Skills: • Strong proficiency in soldering (fine-pitch SMT, through-hole). • Familiarity with oscilloscopes, multimeters, and other electronic test equipment. • Knowledge of PCB design and layout (Altium, Eagle, or similar). • Ability to interpret schematics and electronic diagrams. Soft Skills: • Strong problem-solving abilities and attention to detail. • Excellent organizational skills and ability to manage multiple tasks simultaneously. • Effective communication skills to document and relay findings. • Preferred Skills: • Experience with embedded systems testing. • Familiarity with firmware debugging tools (nice to have). • Basic programming knowledge for automated testing (Python, C, or LabVIEW). The people here at Hanna create testing solutions that help improve everything from the taste of your local microbrew to the safety of the water from your tap. With operations in 34 countries, Hanna is working to solve some of the world's biggest problems by making scientific testing more accessible, easy and accurate. Working for Hanna is an opportunity to be a part of the solution in making a better world. We offer a competitive salary and a comprehensive benefits package. Job Type: Full-time

We are seeking a Staff Electrical Engineer specializing in Power Electronics to help our customers with automation and motion control products. We sell a variety of industry-leading motion solutions to industries that include aerospace, healthcare, semiconductors and more. We sell & install automation and motion control systems to major manufacturers throughout the US. Our ideal Electrical Engineer will focus on power electronics and power distribution. Strong past experience would include projects like building an electrical cabinet. Responsibilities Lead the execution of major electrical engineering programs and systems Drive development efforts for our customer installations, including BLDC motor control, inverters, AC/DC power conversion, regeneration, and power distribution Collaborate with mechanical, industrial design, and firmware teams to ensure seamless system integration Ensure compliance with FCC/EMC requirements Requirements 3+ years of experience in electronics system development Strong expertise in DC/DC and AC/DC power conversion design and integration Experience working with power electronics Strong foundation in electrical engineering best practices, system-level design, and validation

Job Description & Skill Requirement: • Knowledge of Semiconductor Automation Solutions • Relevant experience of designing of Wafer handling Robotics Automation • Relevant experience with Power and Control schematics • Relevant experience of resolving manufacturing queries & issues • Experience of AutoCAD, AutoCAD Electrical • Excellent in verbal and written communication in English language • Able to handle Microsoft Office applications • Able to work independently with minimum supervision Knowledge of Semiconductor Automation solutions for design of Wafer handling Robotics Automation, AutoCAD experience Knowledge of PLC, Automation products is an added advantage

Analog Photonics is a Boston based technology company with expertise in advanced, large-scale and high-performance photonic and electronic application-specific integrated circuits. We use our proprietary silicon photonic platform to serve the automotive lidar and data communications markets with innovative, chip-scale solutions. Analog Photonics has developed a portfolio of state-of-the-art silicon photonics-based designs including the world's best optical phased arrays. Our designs are fabricated in a 300mm CMOS foundry using a proprietary photonics platform that is optimized for low cost, high reliability, and high yield. Overview We're seeking a self-starting hardware design engineer for our automotive LiDAR business area. As a Hardware Engineer, you will be responsible for capturing electrical requirements, designing/testing complex mixed-signal PCBs, mentoring junior engineers, and interfacing with engineers in other disciplines to develop the system. The candidate brings technical experience in digital design, analog design, low-noise design, experience with FPGAs, experience in controls, and some knowledge of electro-optics or photonics. This person is also an effective communicator, keeps an open mind, and is interested in both learning from and teaching colleagues who are experts in their field. Join our team if you are: · interested in working in a fast-growing early-stage startup · enthusiastic about working on disruptive silicon photonics to shape the automotive LiDAR space · a team player who thrives working in a dynamic environment Skill Requirements · Mixed signal PCB board design or silicon photonics design · Design and test of low-noise circuits · Experience with high-speed ADCs and DACs · Experience with FPGAs · Excellent debugging skills · Basic knowledge of control systems · Managing manufacturing and production of boards and modules · Experience designing complex systems despite risk and uncertainty Required Qualifications: 1. Strong hands-on engineering and prototyping skills 2. Schematic capture and layout of analog, mixed signal and high-speed designs (Altium preferred) 3. Comfortable identifying and choosing ICs as well as guiding architecture decisions 4. Knowledge of SPICE, Matlab or other simulation programs 5. BS Electrical Engineering 7+ years / MS Electrical Engineering 5+ years' experience The ideal candidate will have experiences in several of these areas: · Mixed signal PCB design · Low-noise PCB design · Electro-optic systems, especially LiDAR · Digital communication protocols, such as USB, Ethernet, RGMII/SGMII, I2C, SPI, UART, etc. · Designing for and debugging FPGAs, especially Xilinx devices · Digital signal processing · The position is full-time, on-site, and available to be filled immediately. Candidates must be authorized to work in the United States.

About Us Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Science & Technology, Mission Critical, Academic, Healthcare and Commercial buildings. Approaching our 75th year in operation with a staff of 450+ located across ten offices, we are proud to be one of the leading independently owned engineering firms in the country. If you are looking for an opportunity to break away from your silo to grow your career while being able to work across these various projects, we are looking for you. We offer mentorship, growth and stability in an ever-changing volatile environment. Join us to do the best work of your career as a Senior Electrical Engineer at our Boston, MA, Atlanta, GA, Alexandria, VA, New York, NY, Newark, NJ, Philadelphia, PA, Charlotte, NC, Long Beach, CA or Miami, FL (Hybrid schedule). If not located in any of these areas, we are open to discuss with you. As a Senior Electrical Engineer, you will be designing the building infrastructure for large scale mission critical data center projects or unique projects involving EV & PV Distribution, clean rooms, labs, or commercial hi-rises with integrated sustainability. Expand your skillset and have a voice by working outside the box with the way we approach projects at Vanderweil. Some of your responsibilities include the following: Every Vanderweil Engineers team member brings something unique to the table. Here is what we are looking for with this role: Working with electrical distribution equipment that includes generators, ATS and UPS. Use Revit to model electrical systems. Document design calculations and design path decisions. Model electrical distribution systems with our analysis software. Create specifications for basic projects. Part of project team in the production of engineering solutions for large scale and complex building projects. Perform site surveys. Essential Skills & Requirements 9+ years of related experience Bachelor's degree in Engineering or equivalent experience Revit knowledge is a plus Understanding of the NEC, IBC and IECC. SKM, AGI 32 and AMPCALC 4 desired. Our Flexible & Hybrid Work Culture At Vanderweil Engineers, we believe our best work is done when flexibility is offered. We know that work/life synergy is crucial to our employees, our flexible and hybrid work style allows team members to have the freedom to be innovative, and drive results their way. Our wellness programs are above and beyond, as our team members physical and behavioral health are a priority. We are an equal opportunity employer committed to diversity in the workplace. If you would like to connect with us for more information, please contact a member of our recruitment team or to learn more about our work culture, please visit us at ******************* *************************************** The compensation that we expect to pay for this position is commensurate with years of experience, professional licensure and education.

Title: PCBA Electrical Test Engineer Work Hours: 9:00 am - 5:00 pm Length of Contract: 6 Months Qualifications: 5+ years of experience in PCBA electrical testing, preferably in robotics, automotive, or aerospace industries. Strong hands-on experience with oscilloscopes, logic analyzers, and other debugging tools. Expertise in board bring-up, functional testing, and troubleshooting of high-speed digital, power, and mixed-signal circuits Responsibilities: Develop and implement PCBA test plans for validation, bring-up, and production. Design and maintain automated test fixtures and software for board-level diagnostics. Troubleshoot PCBA failures, working with design engineers and suppliers to drive root-cause analysis and corrective actions

This is a contract to hire role. MUST work on site Monday-Friday in Providence, RI. Must have experience as an electrical/electronic technician in a high voltage lab environment. This person will be working independently on electrical/electronic product testing conducting performance, reliability, diagnostic, and UL testing. Experience with electronic safety devices such as Ground Fault Circuit Interrupters (GFCI's) would be the preferred candidate, but similar electrical product testing experience is acceptable. -Must have an Associates Degree in Engineering (Electrical/Electronic/Electromechanical). -Minimum of 2 years experience in a design environment. -Must be capable of working independently under engineering direction. Must have proficiency in setting up and using lab equipment such as oscilloscopes, voltmeters, programmable thermal chambers, etc. apply to: ************************

About The Job Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking a I&C Engineer with experience in the pharmaceutical/biotechnology industry. The ideal candidate will assist with the design, development, and implement instrumentation and control systems for building and process automation systems. He/She will collaborate with cross-functional teams, including process engineers and operations, to define control system requirements and specifications. Role accountabilities: Assist with the design, develop, and implement instrumentation and control systems for building and process automation systems. Collaborate with cross-functional teams, including process engineers and operations, to define control system requirements and specifications. Select appropriate sensors, controllers, and instrumentation devices to meet project and operational needs. Take ownership of device and instrument criticality assessments to ensure proper Calibration activities are scheduled and performed. Create and maintain control system documentation, including system architecture diagrams, specifications, and standard operating procedures (SOPs). Program and configure control systems, including PLCs (Programmable Logic Controllers), DCS (Distributed Control Systems), and SCADA (Supervisory Control and Data Acquisition) systems. Conduct testing and validation of control systems to ensure functionality, reliability, and compliance with industry standards. Troubleshoot and diagnose instrumentation and control system issues, providing timely solutions to minimize downtime. Implement and oversee preventive maintenance programs for instrumentation and control systems to ensure optimal performance. Develop and deliver training programs for operators and maintenance staff on control system operations and troubleshooting. Monitor system performance and analyze data to identify opportunities for optimization and process improvements. Coordinate with external vendors and contractors for the procurement, installation, and maintenance of instrumentation and control equipment. Participate in project planning and management, providing technical expertise to support project initiatives. Assist the project with equipment and monitoring system startups Other duties as assigned Qualifications & Experience: 7+ years of I&C engineering experience in a pharmaceutical/biotechnology industry Bachelors degree in related field Ability to provide legal US work authorization documents required. Will consider US domestic travelers and relocation. Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. Salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location.

AM Batteries, Inc., located in Billerica, MA, is revolutionizing battery manufacturing to enable a lower-cost and greener battery manufacturing process. AM Batteries is looking for an electromechanical hardware engineer to join our hardware and process R&D team. In this position, you will contribute to the development of next-generation manufacturing hardware and processes. You will spend most of your time in the lab, building, testing, experimenting, and improving designs over which you will have influence and ownership. You will work closely with an experienced team invested in your professional growth, development, and contributions to our product. Key Responsibilities: Design, prototype, and test prototype battery manufacturing components and devices Operate and tune existing manufacturing processes with our process and operations teams Analyze existing process performance to develop first-principles driven design iterations Synthesize electromechanical designs from lab- and prototype-scale observations Work closely with colleagues to design, fabricate, implement, and evaluate prototype designs Troubleshooting of mechanical and electrical systems Maintain scrupulous work records Required Qualifications: Training and work history: BS in mechanical engineering, mechatronics, robotics, or a related field 0-3 years of industry experience A design portfolio (or website) showing off your current and past projects Skills: Experience with programming (e.g., MATLAB, python, Arduino, Teensy) Comfortable and proficient with 3D modeling software Familiar with multiple fabrication techniques (e.g., mill, lathe, laser cutter, 3D printer, breadboard, PCB layout) Proficiency with basic electronic circuits and feedback control systems Excellent reading comprehension and written communication skills Work style: Self-motivated with a keen attention to detail Coachable and appreciative of feedback Take your work seriously Knock down walls to make things happen Bonus Skills: · MS, MEng · Experience with precision machine design · Member of project teams Cultural Contribution: You are expected to lead by example, promoting a culture of respect, problem-solving, and collaboration. Your leadership should inspire your teams to transcend personal differences, fostering an environment conducive to innovation and collective success. COMPENSATION AND BENEFITS: · Competitive salary · Health, dental, vision, and life insurance · 401k plan · Employee stock option Please visit us at: ************************* If you're ready to contribute to groundbreaking advances in battery technology and make a tangible impact on our sustainable future, we invite you to apply. Join AM Batteries in powering innovation and excellence!

PM Group is currently engaged in the delivery of multiple Life Science projects in the USA. Together we will all be sharing knowledge, learning, growing and continuing to be an integral part of supporting PM Group's ongoing expansion in the US. Outsourced Technical Services (OTS) is an integral part of our ability to support clients across the complete project life cycle. We deliver fast, flexible outsourcing solutions for clients worldwide. You will be on-site executing cutting-edge projects for Cell & Gene Therapy, Biologics, and Pharma facilities for both US and international clients. PM Group is an employee owned, international project delivery firm with a team of 3,600+ people. We are world leaders in the pharma, food, biotech, medical technology and mission critical sectors. From our network of offices in Europe, Asia and the US, we work with the world's leading organizations. We are focused on growing a sustainable business centered on our people, our clients and trade partners. Responsibilities Participate in conceptual and detailed design efforts by identifying scope, gathering user requirements, and providing comment on design packages. Participate in / conduct regular contractor safety evaluations to ensure all appropriate constructions safety requirements are being adhered to. Review project submittals and RFIs to ensure project aligns with client corporate specifications and standards as well as industry best practice. Update site drawings, system P&IDs, and other documents as needed to ensure accurate as-built conditions are recorded. Coordinate project activities with all internal and external parties to ensure project activities do not negatively impact site operations. Deliver periodic project status reports to all internal project stakeholders (internal customers, engineering, and plant management, etc.). Interact with city inspectors and outside contractors as needed within the scope of assigned projects. Provide daily oversight of all on-site contractors for assigned projects.This includes (but is not limited to) scheduling of contractor activities, oversight of contractor safety while on site, and acting as liaison between contractors and site personnel as required. Support startup of new equipment, including the execution of commissioning activities, field troubleshooting of newly installed equipment, and field support to site validation staff Qualifications Construction management for utility, process, equipment, and facility project experience is greatly desired. Ability to manage multiple tasks effectively, possesses excellent planning and organizational skills Strong teamwork and the ability to maintain constructive relationships with personnel from various disciplines at all levels in the organization is required. PMP certification is a significant advantage. OSHA 10 or OSHA 30-hour qualification is a significant advantage. Previous biotech / biopharmaceutical experience is a significant advantage. Exposure to commercial construction activities with some degree of understanding of all trades to support construction efforts. General knowledge of pertinent building, plumbing, mechanical, electrical and fire protection codes. Qualifications/training in construction management is a plus. Candidates must be able to lift 25 lbs and negotiate active construction sites. Excellent oral/written communication skills Why PM Group? As an employee-owned company, we are inclusive, committed and driven. Corporate Responsibility and Sustainability are the heart of our new 2025 business strategy. Click here to read more in our Corporate Responsibility and Heath, Safety & Well-being Report 2023. Inclusion and Diversity are core to our culture and values. Wherever we work, we commit to a culture of mutual respect and belonging by building a truly inclusive workplace rich in diverse people, talents and ideas. Valuing the contributions of all our people and respecting individual differences will sustain our growth into the future. PM Group is committed to ensuring our hiring process is fair and accessible to all and will provide candidates with disabilities with reasonable accommodations required to participate in the recruitment process. If you require any assistance in this regard, please let us know. RECRUITMENT AGENCIES NEED NOT APPLY

At Fitzemeyer & Tocci Engineering, we are committed to providing the highest level of service and quality in the MEP engineering and construction management industry. We are the “Owner's Engineer” providing innovative, practical engineering and construction leadership. We are a team of professionals who are passionate about delivering innovative and sustainable solutions for our clients with specialized expertise in a diverse range of institution and facility types, including Academic, Healthcare and Science & Technology. We are currently seeking to add a Mechanical Project Leader to our Engineering team. Are you ready to take your HVAC engineering career to the next level? We are seeking a dynamic HVAC Project Leader to join our engineering team. In this experienced role, you will tackle non-routine and complex assignments, work alongside Senior Project Leaders to develop innovative design concepts, and primarily focus on technical aspects while gradually incorporating project management responsibilities. At F&T we are dedicated to building a diverse, inclusive, and authentic workplace, so if you're excited about this role, but if your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyways. TYPICAL DUTIES: Collaborate with Senior Project Leaders on schematic design, including mechanical and electrical room sizes and requirements. Transform design concepts into development and construction documents. Guide Entry Level Designers and Senior Designers, reviewing their work and providing mentorship. Prepare design specifications and participate in company-wide projects like BIM and Standards. Lead trade coordination and execute complex design tasks, including mechanical and electrical room layouts. Attend construction meetings, generate observation reports, and conduct construction inspections. Coordinate clearances with other design professionals and select appropriate project details. Document existing conditions, troubleshoot issues, and conduct code research and evaluations. Prepare addendums, change orders, and additional service requests. Offer value engineering and participate in trade QA/QC to ensure compliance with design standards. Support the firm's outreach and marketing efforts to enhance visibility and thought leadership. Leverage resources across locations and time zones to meet project goals. Act as the responsible agent on commissioning and construction management projects. Innovate and enhance job functions and firm operations. KNOWLEDGE AND EXPERIENCE REQUIRED: 5+ years of design experience with an MEP/Consulting firm. 10+ years of overall experience. Bachelor of Science in Engineering required. FE required; LEED and/or PE preferred. Proficient in design software and knowledgeable in CAD/BIM operations. General knowledge of mechanical and electrical system design. Capable of working within a project team. Understanding and knowledge of applicable codes. Keeps up with the latest advancements in design specialties through continued education. We offer a comprehensive package of benefits and opportunities for personal and professional growth. Our employees enjoy a competitive salary, 90% paid health and dental insurance, retirement savings plan with 401K Match, generous paid time off, and opportunities for career development through paid training and education. We also value work-life balance and offer flexible scheduling. Join our team and be a part of shaping the future of MEP engineering and construction! Fitzemeyer & Tocci is an equal opportunity employer and does not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status. All qualified applicants will receive consideration for employment without discrimination.