Electrical Apprentice Jobs in Clute, TX

As an NRG employee, we encourage you to take charge of your career and development journey. We invite you to explore exciting opportunities across our businesses. You'll find that our dynamic work environment provides variety and challenge. Your growth is key to our ongoing success-take the lead in shaping your career development, goals and future! **Job Summary:** An Apprentice Electrician, working under the direction of a journeyman electrician and /or Maintenance Supervisor, performs the duties of an Electrician and attends the apprenticeship training classes. **Essential Duties/Responsibilities:** + Learn and practice safe methods and procedures for personal protection, protection of fellow workers, and protection of the public per NRG/Plant Operations policies and OSHA standards. + Install, maintain, test, inspect, and repair generating station, substation, and related facilities equipment. + Successfully complete apprenticeship training classroom and on-the-job requirements. + Works with other crafts or contractors. + Operates heavy equipment such as overhead and mobile cranes, forklifts, bucket trucks, and use hand and power tools to repair plant equipment. + Repair, test, troubleshoot, inspect, install, remove, and maintain power plant equipment such as generators, transformers, breakers, switchgear, motors and auxiliary electrical equipment such as, freeze protection, overhead cranes, cabling and power feeds. + Diagnoses and corrects electrical equipment issues. + Assist Journeyman in the repairing of electrical and electronic instruments, troubleshooting faults in electrical circuits and restoring them back to operation. + Assist in switching to clear circuits for equipment maintenance safely and correctly. Use tools, material, and work control documents to assist Mechanics in troubleshooting malfunctions of plant equipment and make or recommend repairs and corrections. + Follow, interpret and act on written and verbal job instructions, and reports, technical manuals, and data. **Working Conditions:** + Power Plant Environment: Work both inside and outside in all temperatures and climate conditions in accordance with Heat Stress procedures. + Work around large rotating equipment, energized electrical equipment in high noise areas, and/or in confined places, on elevations in excess of 250 feet, or from platforms at heights of 5 feet or greater. + Climb stairways, ladders, and work from aerial devices. + Must be prepared to work irregular or rotating shifts and respond to emergency callout 7 days a week, 24 hours a day. + Ability to work in mentally stressful environments: must be able to react to crises where immediate action is required to correct or curtail potentially damaging or hazardous situations. **Minimum Qualifications:** + High School diploma or GED. + Six (6) months electrical experience. + Valid Drivers' License required. **Preferred Qualifications:** + Associate of Applied Science Degree in Power Plant Technology, Industrial Electrical Control, or related field + Electrical experience in an industrial or commercial setting or related military experience **Additional Knowledge, Skills and Abilities (KSAs):** + Basic mechanical aptitude. + Ability to communicate orally and in written reports, condition of equipment and status of jobs to supervision, operations, and other craft personnel and outside service representatives. + Knowledge of electricity, voltage, and current relationships. + Knowledge of Federal, State, and Company environmental guidelines. + Ability to learn mechanical and electrical control equipment and basic power plant equipment operation. + Use precision measuring devices. + Properly size conduit, cable, conductors and install and terminate them. + Ability to Tag Out/Lock Out equipment per NRG's Tag Out/Lock Out procedure. + Ability to use a personal computer and associated software. + Ability to operate Company vehicles and equipment (e.g. forklift, plant vehicles, etc.) and maintain operating licenses and certifications. + Ability to apply knowledge of plant operations, equipment and skill area knowledge to daily decision making. + Ability to do routine cleaning of work area. + Ability to complete all written and electronic records to document work in progress and completed. **Physical Requirements:** + Daily work expectation requires ability to perform tasks by walking, standing, sitting, kneeling, crouching, squatting, twisting, pushing, pulling, shoveling, climbing, and working with hand tools (up to 25 pounds) in position above and below head, and extended from body to complete repairs. + Lift, carry, position and usetools and/or equipment (weighing up to 50 lbs.) in awkward positions, swing various weights of sledgehammers, stoop and bend to reach valves, pull on chain-falls or come-a-longs. + Ability to twist the body and neck while driving company vehicles or operating company equipment. + Performance of duties may cause frequent jarring of the body. + Work with and around hazardous and non-hazardous materials. + Must be able to wear personal protective equipment (PPE) as required i.e....steel-toed boots, respirators, goggles, safety glasses etc. + Have ability to discern and respond to verbal and auditory signals. + Ability to discern assorted colors. **_Please Note: Salary offered will be commensurate with the successful candidate's education and/or experience and in accordance with the Collective Bargaining Agreement covering this position._** NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Vet/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Official description on file with Talent.

* This role requires 100% travel. * You will need to have a current Electrical License. * You will need a TWIC Card or be able to obtain one in your first 30 days to remain working. The Apprentice Electrician is responsible for repairing, maintaining, designing, and installing different kinds of electrical systems. In addition, the Apprentice Electrician determines the type and cost of materials required for the project, ensures specifications and drawings are accurate, reviews project and plans, determines layouts and testing electrical patterns. This role is also responsible for retrofitting equipment with controls needed to improve the efficiency and performance of electrical devices. This position reports to the I & E Superintendent. Primary Job Function: * Running tests, isolating problems, replacing damaged section of wiring, laying conduit, and performing other tasks as required. * Performing physically demanding tasks like moving or lifting heavy objects, digging trenches for laying conduit. * Be able to perform basic duties associated with the installation of electrical systems. Such as (Bend conduit, install supports and raceway for cable distribution, install cable tray, installation of grounding system, pull cable, and assist as directed). * Have basic ability to read electrical drawings. * Can lift up to 50lbs. For the assistance of moving materials for installation. Experience: * Entry-level knowledge of commercial electrical installation, maintenance and repair experience. Education & Certifications: * High School Diploma required. * Journeyman Electrician License or Apprentice License applicable to the state where work is located. Competencies: * Proficient in electrical installation, maintenance and repair in all settings. * Reports to assigned job site location on time, as directed. * Understands and complies with Strike's safety requirements (O.S.H.A.). * Understands and complies with all NEC, state, and local codes. * Takes pride in craftsmanship. * Has ability to visualize completed work prior to installation. * Has ability to plan, schedule, and organize tasks in an efficient manner in order to meet deadlines. * Demonstrates proper use and safe handling of tools, equipment, and materials. * Setup and verify field devices and controls are correct for field installations and owner acceptance. * Reads and understands labels, job site maps/directions, instruction manuals, and written instructions accurately. * Possesses knowledge of and ability to properly give 'hand signals' to operators. * Possesses knowledge of effects of soil on underground installations and cables. * Has ability and skill to direct/train helpers and apprentices in proper work practices to meet production requirements. * Maintains personal hand tools per Strike's company policy. * Possesses technical knowledge, safety knowledge, and ability to work with live/energized parts. * Knowledge of electrical tools and machines used in settings. * Should possess strong manual dexterity. * Great eye-hand coordination for working with small wires. * Ability to recognize wires by colors. * Expert communicator and should possess problem solving ability. Other Criteria: * Complies with Bolt's policies and procedures. * Complies with Bolt's Drug & Alcohol Policy maintaining favorable drug testing results throughout employment. * Performs job safely with respect to others, property and individual safety. * Works effectively with others to encourage teamwork and productivity. * Eligible to work in the United States. * Valid Driver's License. Bolt is an Equal Employment Employer

CCS is hiring Electricians & Apprentice Electricians for a new & exciting project in the area. Must have a minimum of 5 years of experience. Who is CCS? Come work with one of the best construction staffing agencies in the country that deeply care about our skill force. We work with the most reputable and dependable contractors to make sure you go out to the best possible job site that makes sense for your family and you. What CCS Offers: Recruiters that will answer your phone call & put your needs FIRST! CCS Core Program that highlights our most skilled & most dependable workforce. Recruiters are committed to supporting our work force by offering free OSHA classes & Safety Certifications to enhance your skill set and build up your resume. Safe workers are the best workers CCS is looking for the following expertise for this thrilling role: Electricians: 4+ years of commercial electrical experience Apprentices: Strong desire to learn electrical work All Necessary Power & Hand Tools Ability to work on large-scale electrical systems If you're looking for a role that values your expertise, offers room to grow, and rewards dedication with better pay, this is the opportunity you've been waiting for. Apply now to start your journey toward a more promising career with us! CCS is an EEO

Responsible for safely assisting Electrical Laborers and Journeyman with material handling, assembling and dismantling of equipment, preparing work areas, and cleaning of machines and work spaces. EXPECTATIONS OF ALL TEAM MEMBERS At Mortenson, we believe everyone is a leader. For that reason, every team member is expected to apply our leadership principles - Do the Right Thing, We Before Me and Inspire What's Possible - in their work. This means we act with dependability, initiative and a positive attitude to produce high quality work and deliver an exceptional customer experience. We are on time, productive and consistent in our attendance. We approach work as part of a team, listen to the opinions of others and cooperate to achieve project goals. We accept direction from supervisors and seek out constructive feedback. We follow rules and procedures to ensure quality work and safeguard the wellbeing of ourselves and others. We push to exceed the established goals, standards and accountabilities of our positions to increase quality, safety and innovation. KEY RESULT AREAS (ESSENTIAL FUNCTIONS) * A. Measure, cut, and bend wire and conduit utilizing various hand tools * B. Safely utilize hand and power tools after proper training (Drills, Crimpers, Cutters, etc.) * C. Lift, position, and fasten objects * D. Prepare, handle, and supply of materials and tools be used by electrical trades * E. Maintain a clean and organized work area, tools, and equipment * F. Work under immediate and close supervision according to standard instructions and established procedures * G. Effectively work and build relationships with those of diverse backgrounds and organizational levels * H. All other duties as assigned Effectively work and build relationships with those of diverse backgrounds and organizational levels KNOWLEDGE, SKILLS, AND ABILITIES * A. Limited ability to read and interpret documents such as safety regulations, operation and maintenance instructions, blueprints and schematic drawings, and procedure manuals * B. Ability to work with tools, such as, power and non-powered hand tools * C. Willing and able to follow instructions and ask clarifying questions * D. Ability to work with equipment, such as, vibrators, pumps, drills and jackhammers, forklifts, skid loaders and power buggies * E. Ability to handle materials that can weigh up to 200Ibs * F. Strong teamwork orientation * G. Positive attitude and professional customer service skills * H. Detail oriented * I. Active listening skills and effective communication including an openness to diverse input and feedback EDUCATION AND EXPERIENCE REQUIREMENTS * A. Relevant experience preferred * B. Current driver's license preferred ESSENTIAL PHYSICAL REQUIREMENTS A. Ability to frequently work in heat and other weather conditions B. Frequently crouch, kneel, squat, climb C. Ability to lift, push, pull up to 50 lbs D. Frequently reach high and low places E. Ability to see, hear, balance, and review job sites F. Ability to stand and walk throughout work day G. Ability to use repetitive hand/arm/leg movements This position description is not intended to be a comprehensive list of the duties and responsibilities of the position. The duties and responsibilities of this position may change without notice. Mortenson is an EOE/Affirmative Action/M/F/Veteran/Disabled employer.

Craft Apprentice (Electrical) Department: Operations and Facilities Wage/Hour Status: nonexempt Immediate Supervisor(s): Director of Maintenance Pay Grade: Per Compensation Manual Days Employed: Per Compensation Manual * Maintain schools in a condition of operating excellence so full educational use may occur at all times QUALIFICATIONS: Education/Certification: * High School diploma or G.E.D. desired * Clear and Valid Texas Driver's License Special Knowledge/Skills: * Skilled in the use of hand tools and power tools * Able to follow verbal and written instructions * Have a good driving record * Be willing to attend classes and workshops * Ability to assist Electricians in the transformation of plans into a completed product * Basic knowledge of electrical & lighting systems Experience: * No experience necessary MAJOR RESPONSIBILITIES: * Maintain all safety and code requirements of the State, local, and Board of Education guidelines * May be required to be on 24-hour call-out * Be able to work with designated crafts in the work assigned * Assist Electricians in performing regular preventive maintenance on equipment * Perform all other duties assigned EXPECTATIONS OF MENTAL DEMANDS/PHYSICAL DEMANDS/ENVIRONMENTAL FACTORS: The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job * Tools/Equipment Used: Light truck or van, various tools such as; hand and power tools, and other tools as needed on work assignments. Specialty tools related to specific craft assignments. * Posture: Frequent standing; kneeling/squatting, bending/stooping, pushing/pulling, and twisting * Motion: Frequent walking and reaching * Lifting: Heavy lifting and carrying (50 pounds and over) on a daily basis * Environment: Work inside and outside (exposure to sun, heat, cold, and inclement weather); exposure to noise * Mental Demands: Work with frequent interruptions; maintain emotional control under stress * Professional Dress: Dress must be clean, neat, in a manner appropriate for his or her assignment, and in accordance with any additional standards established by his or her supervisor and approved by the Superintendent. During work hours, visible body piercings (except earrings) will not be allowed. EVALUATIONS: * Performance of this position will be evaluated annually

About Us A family-owned company in Sugar Land, Texas, Welker designs and manufactures innovative solutions for the oil and gas industry and beyond. With 65+ years of industry experience, ERP system, 3D CAD software, and on-site manual and computer-aided machines, we are a one-stop-shop for industry-leading products, turnkey solutions, and worldwide service. If you're looking to make a difference at a dynamic, forward-looking company, Welker might be the right fit for you. About Our Systems Apprentice Role Our ideal candidate is someone who loves to work with their hands and develop new skills. We are looking for an apprentice that is eager to learn all aspects of assembling custom sampling systems for our clients' applications. If you are ready to begin a career building and testing quality systems and products, this is the position for you! It's a physical job - you may be on your feet for 90% to 95% of your workday. You will be expected to safely lift and carry items up to 50 pounds. Bending, stretching, and climbing ladders will be daily activities. Responsibilities Interpret and follow written work instructions, technical specifications, and engineering drawings; learn and execute tubing, electrical wiring, and circuits Perform functional product testing utilizing nitrogen and helium; complete hydrostatic testing Partner with engineering to troubleshoot any issues and execute any changes needed Assemble a wide range of Welker products; opportunity to support other areas including painting and sandblasting These are some of the more frequent tasks you could expect to perform during your workday, but you may be called upon to fulfill other duties as needed. Key Skills Communication: You interact with peers, team leads, and managers in a kind and professional manner, because communication is essential for a successful day. Teamwork: You work well with others with an attitude of cooperation and achievement, and you are committed to the success of the team as a whole. Work Ethic: You have excellent organizational and follow-through skills with a highly developed sense of prioritization. Attention to Detail: You make a conscious effort to focus on quality and safety. The Welker team is a diverse and motivated group. These key skills keep our Assembly department running smoothly. Qualifications Ability to work outdoors occasionally and meet the physical requirements of the role High school diploma or equivalent Experience working with tools and reading drawings are preferred; electrical skills are a plus Must be able to learn and use Welker's ERP software system Does this sound like you? Submit your application, and let's talk! This is a full-time, in-office position with the occasional opportunity for overtime. Starting salary is determined by experience, education, and potential. Welker cares for our employees, so we offer competitive benefits including paid time off, paid holidays, health/dental/vision insurance, 401k, and tuition reimbursement.

divh1about the position…/h1pThe electrical foreman is a critical leadership role with a significant impact on the success of a project, ensuring that we maintain a high level of quality, safety and customer satisfaction. Foremen at Power Design not only have access to innovative technologies in the field - including fully-equipped iPads - they also travel to our 16,000-square-foot training facility for customized training courses at our headquarters in St. Petersburg, Florida. /pp/ph1position details/responsibilities…/h1ulliWorking closely with project superintendent and other trades, oversee the assigned scope, including the management of material and manpower. /lili Accountable for enforcing and promoting high quality and safety standards. /lili Utilize technology such as company-provided iPad and smartphone to ensure the job gets done on time and exceeds customer expectations. /lili Supervise, mentor and motivate employees working on designated scope. /li/ulp/ph1here's what we're looking for…/h1ullispanOSHA 30 certification preferred. /span/lili Progressive electrical leaders who love using technology and want a clear career path/lili Skilled field supervisor with at least five (5) years of experience managing a scope and running multimillion dollar projects for an electrical contractor. /lili Must have an active journeyman or master electrician license. /lili Proficient knowledge of the National Electrical Code (NEC), local codes and construction safety requirements. /lili Must have at least basic computer and writing skills. /lili Demonstrate and uphold all of Power Design's core values, which include integrity, accountability, teamwork, innovation and growth. /li/ulp style="text-align:inherit"/pp style="text-align:inherit"/ppspan At Power Design, we are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Power Design believes that diversity and inclusion among our teammates is paramount to our success as a national company, and we seek to recruit, develop and retain the most talented people from a diverse candidate pool nationwide/span/pp/p/div

Essential Job Functions: * Plans, supervises and performs all phases of installation, maintenance, repair and inspection of electrical systems * Inspects installations for quality, ensuring codes are met * Provides customer and client with cost estimate of proposed electrical installation, repair and/or maintenance * Performs cost estimates and projections for electrical projects * Reviews and evaluates electrical procedures * Evaluates employees' progress, trains and mentors new team members * Ensures project remains under-budget and proper quality equipment and tools are utilized * Maintains a proper record of completed tasks and the methods used to achieve goals and objectives * Ensures all work is conducted in accordance with NEC and NFPA requirement as well as local, city, state, and national electrical codes, and all Company and Client standards. Required Minimum Qualifications: * High School Diploma, or Equivalent * Valid Drivers License with clean driving record * Valid ND Electrical License, or have obtained reciprocity in the state of North Dakota * Four (4) years' experience as licensed Journeyman Electrician * OSHA 10, or ability to obtain upon hire * H2S, or ability to obtain upon hire Required Knowledge, Skills & Abilities: * Knowledge and experience with power tools, electrical equipment and construction equipment * Knowledge of electrical codes * Knowledge of proper electrical equipment use conducive to conditions and assignments including adherence to Hazardous Materials and Safety Regulations * Comprehensive knowledge of electrical systems, equipment, operational and mechanical systems including installation, test, maintenance and repair * Understanding of how electrical system operates under normal and emergency conditions * Understanding of electrical schematics, diagrams and blueprints * Verbal and written communication skills * Skilled in repair of electrical equipment, wiring, and other fixtures. * Strong mechanical, analytical and solution driven skills * Basic computer skills (Microsoft Office, Outlook, Etc.) * Basic math skills * Strong troubleshooting ability * Ability to diagnose system malfunctions, locate cause of breakdown and recommend solution * Ability to recognize and respond to dangerous situations or emergencies such as high voltage systems, electrical fires, loose hot wires, broken power lines, etc. * Ability to give direction and oversight to helpers and apprentices Physical Demand/Work Environment: The physical demands described here are representative of those that must be met by the incumbent to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the incumbent is regularly required to talk, hear, and see. * The incumbent frequently is required to stand, stoop, kneel, crouch, climb, balance and walk. * The incumbent is occasionally required to sit. * The incumbent must frequently lift and/or move up to 50 pounds and push/pull up to 100 pounds. * Visual Acuity: must be adequate to perform all required tasks in a safe manner. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * The noise level in the work environment is usually loud and may require use of ear plugs on occasion. * Work is usually done outside at a job site/field site that may have inclement weather conditions. * The incumbent is exposed to moving mechanical parts, vehicles and equipment. Disclaimer: The above job description covers the principal duties and responsibilities of the job. The description shall not however, be construed as a complete job listing of all duties, which may be required from day-to-day.

Install, repair and maintain electrical wiring, conduit, equipment and fixtures. Journeyman Electrician I will perform work underground and above ground performing cable and conduit installations. Perform electrical maintenance repairs in an Industrial setting while leading lesser skilled electricians to ensure a safe work environment. Qualification • Must possess a TDLR Journeyman License, or TDLR Masters License, or NCCER Certified Plus Industrial Electrician or completed the ZCAP Journeyman Electrician Qualification program • Must be able to read and interpret prints, drawings, schematics and plans • Thorough knowledge of Electrician hand, power tools and layout tools • Must have required tools • Must be able to work at heights of 300 ft. • Must be able to meet the physical demands and pre-employment conditions • Must have reliable transportation and be able to work 7 days a week JOB REQUIREMENTS Position Responsibilities • Responsible for complying with all Zachry and site specific safety rules with over sight of co-workers to ensure compliance • Responsible for following direction from a Multi-Craft Electrician, General Foreman, Craft Superintendent, Site Superintendent and or Project Manager • Responsible for complying with the Lock, Tag and Try work procedure; this standard applies to the Sweeny Refinery, associated facilities, and outlying terminals. Will have over sight of co-workers within your area of responsibility to ensure compliance • Responsible for inspecting all designated work areas for hazards • Participate in and complete the Zachry Craft Advancement Program (ZCAP) for Electricians per Site established guidelines. • Responsible for performing detailed inspections on hand and power tools to ensure they are safe to operate and in proper working order • Responsible for the safe use of hand and power tools such as conduit benders, screwdrivers, pliers, knives, hacksaws, wire strippers and drills with over sight of co-workers to ensure compliance • Responsible for examining blue prints, sketches, diagrams, building plans and specifications to determine locations of circuits, outlets, load centers, panel boards, wires, conduit, components and other equipment • Responsible for carrying, cutting, bending, connecting and installing conduit as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance • Responsible for pulling cables and conductors through specified pathways as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance • Responsible for the modification, fabrication and installation of cable trays as required and as defined in NFPA 70 (NEC 2014) with over sight of co-workers to ensure compliance • Responsible for the safe operation of testing equipment to validate connections and ensure capability of circuits using such tools as clamp meters, ohmmeters, voltmeters and harmonics testers with over sight of co-workers to ensure compliance • Responsible for the inspection and testing of all electrical equipment to ensure safe operation and to certify it is operating as intended with over sight of co-workers to ensure compliance • Responsible for the safe installation and maintenance of temporary power systems and their distribution system as defined in NFPA 70 (NEC 2014) with direct over sight of co-workers to ensure compliance • Responsible for the installation and maintenance of the assured equipment grounding / bonding on equipment and facilities with over sight of co-workers to ensure compliance • Responsible for terminating wire/cable to electrical equipment such as but not limited to outlets, switches, breakers, control panels, and distributions systems with over sight of co-workers to ensure compliance • Responsible for observing all state and local building / electrical codes • Responsible for leading the Safety Task Assessment (STA) meetings • Performs other duties as required Essential Skills, Knowledge and Abilities: • Use of mathematics to validate operation and installation methods per NEC 2014 standards • Organization and time management • Active listener • Good decision making skills • Customer service oriented • Ability to work with others - Team player • Good communication skills with co-workers and supervisors • Commitment to Zachry values, safety rules and regulations Physical demands and work environment: • Physical demands: Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools. May be required to lift, carry and move up to 25lbs. Will occasionally work at heights, climb ladders and stairways and work off of platforms. Will use vision abilities to focus, see short and long distances, colors, depth perception and peripheral vision. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots. • Work environment: Will work in all weather conditions ranging from warm/hot - cool/cold. Occasional rain. Will work at different elevations. Noise levels will be moderate to high. Job site will contain light to heavy equipment vehicles, small to large equipment, materials, communication equipment and tools. People standing, walking, sitting, signaling and talking. Bells, whistles and alarms. Certifications and / or Licenses Required* - • Texas Department of Licensing and Regulation Journeyman Electrician License Or • Texas Department of Licensing and Regulation Master Electrician License Or • NCCER Industrial Electrician Certified Or • Achieved Journeyman Electrician Level Qualification through Zachry Craft Advancement Program (ZCAP) ZACHRY is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer CERTIFICATIONS AND/OR LICENSES REQUIRED * NCCER - Industrial Electrician OTHER POSITION OR SITE REQUIREMENTS MVR NCCER APPRIENTENCE LIENCE #LI-E01

Are you currently enrolled in an electrical program looking to gain experience in the field? D o you pride yourself in a job well done? Ready to experience a company where YOU matter? Mackey Services is ready for you! We are seeking a talented individual to join our team as a Journeyman Electrician. In this role, you will play a crucial role in maintaining, servicing, repairing, and installing electrical systems. Your expertise in residential and commercial systems as well as generators will be instrumental in exceeding customer expectations. Who We Are Mackey Services is committed to delivering comfort to our customers for over 30 years by providing dependable and professional heating, air conditioning, electrical and generator service. We strive for an environment where employees are happy, motivated, goal oriented and take pride in providing the highest quality care and service to our customers. Where Our Customers Are Mackey Services provides services in the Greater Houston and Galveston Area. Why Join Us? Competitive Pay + Performance-Based Incentives $25 - $35 per hour depending on experience Medical, Dental & Vision Insurance 401k with Company Match Paid Holidays Paid Vacation and Sick Leave Company Vehicle A Positive Work Environment - You Matter at Mackey! Responsibilities: Manage residential and commercial projects. Generate precise estimates for diverse residential and commercial projects. Diagnose, repair or replace malfunctioning apparatus and components. Check circuit connections to ensure electrical compatibility and safety of components. Measure, cut, bend, thread, assemble and install electrical conduits. Strong communication skills to converse with customers. Embrace safe work habits and exhibit proper care for tools and equipment. Maintain accurate records of work progress and complete necessary documentation. Meet or exceed job requirements and company standards in terms of work quantity and quality. Comply with company policies and procedures, electrical codes and safety standards. Requirements : Knowledge of National Electrical Code requirements. Current Texas Electrical Journeyman License or ability to obtain within the first 60 days of employment. Minimum 4 years residential and commercial electrical experience. Experience working on home generators a plus. Valid Driver's License with a clean driving record. Must be able to pass a background check. and be part of our success story as a Journeyman Electrician. Mackey Services is an equal opportunity employer.

Maintenance & Operations Date Available: 2024-2025 School Year Additional Information: Show/Hide Primary Purpose: Under general supervision maintain, repair and install electrical systems, services and equipment for the district. Maintain and provide for safe condition and operation of all electrical fixtures and systems in district facilities. Qualifications: Education/Certification: High school diploma or GED Valid Texas Driver's License (with less than 10 points on record): To be eligible to drive an Alvin ISD school district vehicle, an employee must meet the guidelines set forth in Transportation Code 521.002. Any employee or applicant who exceeds the maximum points within the designated timeperiods may not be authorized to drive a school district vehicle. (Points are assessed to moving traffic violation convictions and are governed by the Texas Transportation Code, Chapter 708, established by Texas Department of Public Safety.) Special Knowledge/Skills: Must be able to pass drug test and background check Knowledge of electrical circuits and wiring and operating principles of motors and motor controllers Knowledge of local electrical codes Ability to read blueprints, schematics, and written reference material Ability to follow written and verbal instructions Ability to perform mathematical calculations Ability to diagnose and resolve problems Ability to use hand and power tools Experience: Five years in a related field Salary: Auxiliary PG7/261 days Starting: $47,840 Contact: Justin Boyd - Mechanical System Manager ******************* ************

A Journeyman Electrician to play a critical role in wiring, installing, troubleshooting, and testing instruments and PLCs. Required: 5 years’ experience as a journeyman electrician Previous experience with tools and equipment such as a Sawzall, drills, etc. Previous experience running conduit such as EMT and Rigid Previous experience with conduit benders Previous experience with installing enclosures Journeyman’s license in TX Preferred: Previous experience with installing stainless steel pneumatic tubing Previous experience with cable tray Previous experience with terminations Previous experience with material/manpower takeoffs Job Responsibilities: Working from diagrams and schematics, wires instruments to prepare the site for automation system design and programming. Measures, cuts, bends, threads, assembles and installs electrical conduit. Installs tubing for instruments. Pulls wiring through conduit and labels appropriately. Connects wiring to controllers and instruments. Tests continuity of circuit to ensure electrical compatibility and safety of components with testing instruments such as (ohm, volt, amp) meter, voltmeter, ampmeter and/or multimeter. Mounts instruments and PLCs in panels using a variety of hand tools. Observes functioning of installed equipment or system to detect hazards and need for adjustments, relocation, or replacement. Travel may be required depending on the project. Standard tools used include hand tools, power tools (saws, drills), machinery (conduit cutters), multimeters, tubing bender and cutters. Pay Range: $28/hr. - $38/hr. DOE

Job Details Richmond, TXDescription Electrician Level 1 MSF Electric, Inc., a leader in multifamily and single family electrical construction since 2006, is looking for a motivated Level 1 Electrician to join our team. This entry-level position is ideal for individuals with a foundational understanding of electrical systems who are eager to grow their skills in both commercial and industrial environments. The Level 1 Electrician will assist in the installation, maintenance, and repair of electrical systems, ensuring safety, compliance, and quality in every project. Key Responsibilities: • Assist in installing, maintaining, and repairing electrical systems and equipment in industrial and commercial settings. • Read and interpret blueprints, schematics, and technical drawings to support system layout and installation. • Troubleshoot electrical issues using basic diagnostic tools such as voltmeters and circuit testers. • Work with low voltage systems and ensure compliance with NEC (National Electrical Code) standards. • Collaborate with senior electricians and construction teams to integrate electrical systems into new builds and renovations. • Perform routine inspections and identify potential hazards or necessary repairs. • Utilize hand tools effectively for a variety of electrical installation tasks, including minor structural modifications. Qualifications: • Experience: Some residential or industrial electrical experience is preferred. • Licensing & Certification: Active or in-progress electrician's license and relevant certifications (e.g., OSHA, NEC compliance). • Knowledge: Basic understanding of electrical systems, safety protocols, and troubleshooting techniques. • Tools: Must own basic hand tools; specialized equipment will be provided by the company. • Communication: Ability to communicate effectively with team members and supervisors. • Problem-Solving: Basic diagnostic and problem-solving skills. • Driver's License: Valid driver's license with a clean record. • Physical Requirements: Ability to work in varied environments, climb ladders, and lift moderate to heavy equipment. This is an excellent opportunity to join a growing team at MSF Electric, Inc. and develop your career with hands-on training and mentorship from seasoned professionals. Take the first step toward becoming a leader in the electrical industry! Qualifications TDLR apprentice license

We are currently seeking a skilled Journeyman Electrician for a contract project in Pasadena, TX. This is an exciting opportunity for a licensed professional to apply their electrical expertise on a project-based assignment. The ideal candidate will have an active journeyman electrician license, a solid work history, and experience with electrical installation, troubleshooting, and maintenance in a commercial or industrial setting. Responsibilities: Perform electrical installation, maintenance, and troubleshooting for the duration of the contract project. Install, hook-up, and maintain electrical systems according to project specifications and local code requirements. Work independently or as part of a team to complete electrical work on time and within budget. Ensure compliance with all safety regulations and industry standards. Troubleshoot and resolve electrical issues as they arise on-site. Read and interpret blueprints, technical drawings, and electrical schematics. Maintain a clean, safe, and organized work environment. Complete necessary documentation and report project progress. Qualifications: Active Journeyman Electrician license required. Minimum of 3-5 years of experience in electrical work, with a focus on commercial and industrial projects. Strong knowledge of National Electric Code (NEC) and local electrical codes. Valid driver's license and reliable transportation. Ability to work independently and as part of a team. Strong problem-solving and troubleshooting skills. Must provide own tools for the job. Ability to work long hours and meet project deadlines.

The individual with this position will be responsible to perform electrical tests on the motor and generators before and after cleaning process and/or as required by operations. This is a fully on-site position with a minimum of 50 hours a week and may include working the weekends. Responsibilities * The individual is responsible to perform electrical tests on the motor primarily after the baking process. * The individual needs to follow the exact test procedure as indicated during the training. * The individual will need to let a supervisor know immediately if the data points are not within the parameters. * The individual will need to create reports for the tests done daily and upload them into the server. * The individual must perform visual inspections on the machine being tested as per the procedure. * Individual must work with the engineering team for assessment of the test results and so that the engineering team can inform the quotation department in a timely manner. * Required testing includes but not limited to * Megger Test * Surge Test * PdMA Test * This role can expand into other subsequent motor testing tasks depending on the candidate's growth. Job Requirements * Know how on how to operate computers, usage and handling of PDFs and excel sheets. * Familiarity with electrical equipment * Willingness to learn and follow test procedures for accurate documentation of the condition of the machine at the moment of the test. * Punctual with the reporting * Prompt with communicating the results to engineering for analysis and decision making.

Job Details Experienced Texas - Missouri City, TX Full Time Graduate Degree $27.50 Description Starting pay rate: $27.50/hr. Now offering Quarterly Bonuses! Do you want to work for a growing family-owned business that strives to build a better future through sustainability and innovation? Are you looking for a new challenge in a stable, fast-growing sector? Then look no further; LT Foods Americas wants you to join our team now! We offer competitive pay, benefits, vacation time, and more! What we offer: Morning and evening shift - Must flexible for overtime and Saturdays. Matching 401k Plan Annual Performance Review Quarterly Bonus Employee Sponsored Benefits (Medical, Dental, Vision, Life, FSA) after 30 days. Paid time off after 30 days (up to 26 days off annually!) Employee discount on company product Holiday festivities We are seeking an experienced and highly skilled Electrical Technician to work a shift and handle electrical and mechanical maintenance in our RTH and Dry rice packaging plant. Strong experience, technical knowledge, and communication skills are essential for this role. The role will be reporting to the Maintenance Lead and will be based out of Houston, Texas. Key Responsibilities Perform routine maintenance to ensure systems operate efficiently and safely. Inspect electrical components, such as transformers, circuit breakers, and switches, to identify issues and repair or replace as needed. Install electrical systems, wiring, and equipment according to specifications and electrical codes. Diagnose electrical problems using testing devices and repair techniques. Interpret electrical diagrams and blueprints to troubleshoot complex issues. Address emergency repairs promptly to minimize downtime and ensure safety. Recommend upgrades or modifications to improve system performance and efficiency. Stay current with advancements in electrical technology and industry practices. Qualification: 2 year Associate degree in Electrical Technology Proven experience as an electrical mechanic or similar role. Proficiency in reading electrical schematics and blueprints. Knowledge of electrical systems, equipment, and components. Strong troubleshooting and problem-solving skills. Ability to work independently and in a team environment. Attention to detail and commitment to safety. Certification or licensure in electrical work may be required depending on jurisdiction. Knowledge of PLC programming will be an added advantage

Job Title: Technical Engineer Electrical and Instrumentation Job type: Full-Time Type of role: On-site About Lubrizol The Lubrizol Corporation, a Berkshire Hathaway company, is a specialty chemical company whose science delivers sustainable solutions to advance mobility, improve wellbeing and enhance modern life. Founded in 1928, Lubrizol owns and operates more than 100 manufacturing facilities, sales, and technical offices around the world and has about 8,000 employees. For more information, visit ***************** We value diversity in professional backgrounds and life experiences. By enabling a consistent, unbiased, and transparent recruitment process, Lubrizol seeks to create a positive experience for candidates so we can get to know them at their best. We recognize unique work and life situations and offer flexibility, ensuring our employees feel engaged and fulfilled in every aspect of life. Join Our Thriving Team at Lubrizol as Technical Engineer - Electrical & Instrumentation Unleash Your Potential. At Lubrizol we're transforming the specialty chemical industry and looking for exceptional talent to join us on this journey. If you are ready to join an international company with talent around the world, and want to make a real impact, we want you on our team. What You'll Do: We are looking for an exceptionally talented Technical Engineer - Electrical and Instrumentation to join us as a Subject Matter Expert for our Engineering Organization. You will directly impact our innovation of Electrical and Instrumentation Systems by driving best in class solutions to meet rigorous internal standards and compliance requirements. What We're Looking For: Excellent technical acumen with Electrical and Instrumentation Systems and Technologies and their application in industrial settings. Technical leadership within electrical and instrumentation project teams for design, construction, and commissioning perspectives. Demonstrate a safety conscious mindset. Expert in applicable international standards and codes. Extensive expertise with technical specifications, diagrams, and documentation. Strong in troubleshooting technical problems and providing solutions. Collaborate and communicate with our cross functional project teams while acting as consultant and technical leader with project teams, DCS technicians, vendors and contractors to ensure successful project delivery. Be a subject matter expert for Electrical and Instrumentation for internal and external forums. Participate in Process Hazard Analysis (PHA) and convert findings to actionable items Coach and Train others. Present complicated technical subjects and materials to a diverse audience. Strong team player in a matrix organization involving complex project environment. Demonstrate intellectual agility and flexibility. Skills That Make a Difference: Bachelor's degree in Engineering, Automation, Technology or Computer Science or related field. 5 or more years of experience working as an Electrical or Instrumentation Engineer or similar role in engineering design in industrial contexts with a preference for experience in Chemical Processing facilities. Demonstrated hands-on experience in an industrial setting in the Chemical and Petro Chemical Industries. Experience collaborating with cross functional project teams on multiple projects while owning electrical and instrumentation from design through commissioning. Experience with formal project management frameworks including Stage Gates. Experience with SAP, Microsoft Office, AutoCAD is required. Knowledge of PLCs, SCADA, DCS and HMI is preferred. Professional Engineer license for Texas is preferred. Perks and Rewards That Inspire: Competitive salary with performance-based bonus plans 401k Match plus Age Weighted Defined Contribution Competitive medical, dental and vision offerings Health Savings Account Paid Holidays, Vacation, Parental Leave Ready for your next career step? Apply today and let's shape the future together! It's an exciting time to be part of Lubrizol. Lubrizol is not staying put. We are continually learning and evolving. Our passion delivers our success - not only for Lubrizol but for those who count on us every day: our employees, customers and communities. We work with a relentless commitment to operate safely and responsibly, keeping safety, sustainability, ethics, and compliance at the forefront of everything we do. The well-being of our employees, customers and communities is paramount to our culture and in the way we approach our work. As a diverse, global team, we work together to solve some of the world's most pressing challenges. We impact everyday lives through science only Lubrizol can deliver, and we never stop pushing to do it better. One of the founding principles of The Lubrizol Corporation more than 90 years ago was treating every employee with dignity and respect. That same commitment is only stronger today. More than that, we are committed to providing an environment where every employee can be the best they can be, no matter their race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other characteristic.

Facilities and Construction/Apprentice Additional Information: Show/Hide JOB TITLE: HVAC Apprentice-Level 2 DUTY DAYS: 240 PAY GRADE: N05-11 STARTING SALARY : $138.99 / DAY PRIMARY PURPOSE: Responsible for the repair, maintenance, and installation of commercial air conditioning, heating, and building automation systems. QUALIFICATIONS: Certification/Education: * High school diploma or equivalent preferred. * Must have a valid Texas driver's license and meet/maintain insurance requirements of PISD. * Must pass an initial drug test and be part of a random drug testing program. * Must pass a criminal history check. Special Knowledge/ Skills/Experience * Demonstrate general knowledge of operation, maintenance, installation, and repair of work-related systems of designated craft. * Demonstrates the ability to work unsupervised. * Hold EPA Certification in refrigerant recovery (universal) or be able to obtain within one year of taking the position. * General knowledge of tools used in designated craft. * Demonstrate ability to follow verbal and written instructions. * One year experience preferred and willing to progress in skill level. MAJOR RESPONSIBILITIES AND DUTIES: * Assist with installation, maintenance, and repair of commercial HVAC equipment and BAS systems. * Completes work orders as requested. * Assist with the repairs of major HVAC equipment such as compressors, pumps, motors, and other related equipment under the supervision of a licensed HVAC technician. * Completes preventative maintenance of equipment as assigned. * Must have a working knowledge of computer systems regarding email, work order, and time entry systems. * Assist other crafts as needed * Must be willing to respond to occasional after-hour emergencies. * Perform other duties as assigned. WORKING CONDITIONS: Mental Demands: Ability to communicate effectively (verbal); maintain emotional control under stress; interpret policy, procedures, and data; coordinate district functions Physical Demands/Environment Factors: Strenuous walking, standing, climbing, and heavy lifting, must have use of all faculties. Must be able to work from ladders and elevated platforms. Work outside. Exposure to hot and cold temperatures. Exposure to dust, toxic chemicals, and materials. May work on slippery and uneven surfaces.

As an NRG employee, we encourage you to take charge of your career and development journey. We invite you to explore exciting opportunities across our businesses. You'll find that our dynamic work environment provides variety and challenge. Your growth is key to our ongoing success-take the lead in shaping your career development, goals and future! Job Summary: An Apprentice Electrician, working under the direction of a journeyman electrician and /or Maintenance Supervisor, performs the duties of an Electrician and attends the apprenticeship training classes. Essential Duties/Responsibilities: * Learn and practice safe methods and procedures for personal protection, protection of fellow workers, and protection of the public per NRG/Plant Operations policies and OSHA standards. * Install, maintain, test, inspect, and repair generating station, substation, and related facilities equipment. * Successfully complete apprenticeship training classroom and on-the-job requirements. * Works with other crafts or contractors. * Operates heavy equipment such as overhead and mobile cranes, forklifts, bucket trucks, and use hand and power tools to repair plant equipment. * Repair, test, troubleshoot, inspect, install, remove, and maintain power plant equipment such as generators, transformers, breakers, switchgear, motors and auxiliary electrical equipment such as, freeze protection, overhead cranes, cabling and power feeds. * Diagnoses and corrects electrical equipment issues. * Assist Journeyman in the repairing of electrical and electronic instruments, troubleshooting faults in electrical circuits and restoring them back to operation. * Assist in switching to clear circuits for equipment maintenance safely and correctly. Use tools, material, and work control documents to assist Mechanics in troubleshooting malfunctions of plant equipment and make or recommend repairs and corrections. * Follow, interpret and act on written and verbal job instructions, and reports, technical manuals, and data. Working Conditions: * Power Plant Environment: Work both inside and outside in all temperatures and climate conditions in accordance with Heat Stress procedures. * Work around large rotating equipment, energized electrical equipment in high noise areas, and/or in confined places, on elevations in excess of 250 feet, or from platforms at heights of 5 feet or greater. * Climb stairways, ladders, and work from aerial devices. * Must be prepared to work irregular or rotating shifts and respond to emergency callout 7 days a week, 24 hours a day. * Ability to work in mentally stressful environments: must be able to react to crises where immediate action is required to correct or curtail potentially damaging or hazardous situations. Minimum Qualifications: * High School diploma or GED. * Six (6) months electrical experience. * Valid Drivers' License required. Preferred Qualifications: * Associate of Applied Science Degree in Power Plant Technology, Industrial Electrical Control, or related field * Electrical experience in an industrial or commercial setting or related military experience Additional Knowledge, Skills and Abilities (KSAs): * Basic mechanical aptitude. * Ability to communicate orally and in written reports, condition of equipment and status of jobs to supervision, operations, and other craft personnel and outside service representatives. * Knowledge of electricity, voltage, and current relationships. * Knowledge of Federal, State, and Company environmental guidelines. * Ability to learn mechanical and electrical control equipment and basic power plant equipment operation. * Use precision measuring devices. * Properly size conduit, cable, conductors and install and terminate them. * Ability to Tag Out/Lock Out equipment per NRG's Tag Out/Lock Out procedure. * Ability to use a personal computer and associated software. * Ability to operate Company vehicles and equipment (e.g. forklift, plant vehicles, etc.) and maintain operating licenses and certifications. * Ability to apply knowledge of plant operations, equipment and skill area knowledge to daily decision making. * Ability to do routine cleaning of work area. * Ability to complete all written and electronic records to document work in progress and completed. Physical Requirements: * Daily work expectation requires ability to perform tasks by walking, standing, sitting, kneeling, crouching, squatting, twisting, pushing, pulling, shoveling, climbing, and working with hand tools (up to 25 pounds) in position above and below head, and extended from body to complete repairs. * Lift, carry, position and use tools and/or equipment (weighing up to 50 lbs.) in awkward positions, swing various weights of sledgehammers, stoop and bend to reach valves, pull on chain-falls or come-a-longs. * Ability to twist the body and neck while driving company vehicles or operating company equipment. * Performance of duties may cause frequent jarring of the body. * Work with and around hazardous and non-hazardous materials. * Must be able to wear personal protective equipment (PPE) as required i.e.…steel-toed boots, respirators, goggles, safety glasses etc. * Have ability to discern and respond to verbal and auditory signals. * Ability to discern assorted colors. Please Note: Salary offered will be commensurate with the successful candidate's education and/or experience and in accordance with the Collective Bargaining Agreement covering this position. NRG Energy is committed to a drug and alcohol-free workplace. To the extent permitted by law and any applicable collective bargaining agreement, employees are subject to periodic random drug testing, and post-accident and reasonable suspicion drug and alcohol testing. EOE AA M/F/Vet/Disability. Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Official description on file with Talent. Nearest Major Market: Houston