Controls Technician Jobs in Irvine, CA

Desert Regional Medical Center is a 385-bed acute-care hospital classified as a stroke receiving center and level 2 trauma facility with an innovative, patient centered and evidence-based Rehabilitation Services Department. Our compassionate team provides a wide range of inpatient and outpatient services, including acute care rehabilitation, joint replacement & spinal surgery, neurosurgery, ICU, Telemetry, step-down care, skilled nursing, as well as outpatient therapy, hand and lymphedema clinics. GENERAL DUTIES: Under the supervision of the Radiologist, the Radiologic Technologist II shall provide radiographic services to patients. The technologist shall operate imaging equipment, image processing, prepare radiographic exam rooms, and maintain equipment and supplies. The technologist shall provide imaging service utilizing various modalities and in multiple environments including the Inpatient and Outpatient Operating Suites, the Patient Room, Outpatient Imaging facilities, the Emergency Department and in the Department of Radiology. The Radiologic Technologist's performance and behavior shall be both reflective and supportive of the Mission Statement and Core Values of the hospital. Demographic information limited Patient Health Information as related to job function. Shift: Rotate Hours: 8hrs Days off: ********** Employment practices will not be influenced or affected by an applicant's or employee's race, color, religion, sex (including pregnancy), national origin, age, disability, genetic information, sexual orientation, gender identity or expression, veteran status or any other legally protected status. Tenet will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship.

An innovative medical device company is looking to bring on controls engineer for a 3 month project (that could extend) in Culver City, CA. This growing company develops miniature remotely actuated robots that navigate the central nervous system. The miniature robots are controlled via external electromagnetic fields, thus allowing safe and simple motion in the human body. This person will work on the R&D team and lead the development of control algorithms that will enable our novel magnetic propulsion system to accurately control their devices. We are looking for someone to focus on image processing and develop their proof of concept for their upcoming program. Qualifications: 8 to 10 years of hands-on experience working on controls of robotics or other complex electromechanical systems requiring physics-based modeling, and image processing/machine learning. Extensive experience in hands-on programming in Python and C/C++ Demonstrable experience applying a data driven and scientific approach to R&D engineering problems and statistical analysis of real-world data, and large data sets. MS in Mechanical Engineering, Electrical Engineering, Computer Science, Physics, or equivalent. Experimental experience, using sensors, DAQ, MCUs, etc. Experience in bringing products to market in a regulated industry such as Medical, Autonomous vehicles/drones, Defense, Aerospace, or Gaming/Entertainment. Responsibilities of Position: Develop control algorithms that accurately and robustly propel this device to its desired anatomical location using both classical and modern control methodologies. Build effective state estimation systems and signal processing algorithms to sense and localize the device Optimize control algorithm with respect to multiple constraints and different cost functions. Lead statistical data analysis efforts, in particular timeseries, and real-world multidimensional data robustness Design and conduct physical experiments and iteratively improve control algorithms based on experimental findings and theoretical considerations. Lead risk analysis and risk mitigation efforts. Develop timelines and deliver on agreed-upon milestones. Collaborate with a multidisciplinary team including electrical/mechanical/software engineers, materials scientists, and clinical professionals. $60 - $70 an hour depending on experience and education level but pay is flexible

We have an outstanding career opportunity for an Embedded System Engineer to join a leading Company located in the Montebello, CA surrounding area. Salary: $100K- $125K The Embedded System Engineer will contribute to the design and development of firmware solutions for embedded systems, implement PLC programming solutions, and create HMI for enhanced user experience, ensuring high performance and reliability. The Embedded System Engineer Engineer will interface with vendors and subcontractors to develop state-of-the-art technology, participate in design review, review/approve test and validation protocols and reports, and transfer all documentation and PLC programs, including the PCB Gerber files to internal ERP/MRP system. Job Responsibilities: Develop and maintain embedded firmware for microcontrollers and microprocessors used in our products. Design and implement control logic using PLC programming languages (e.g., ladder logic, structured text). Create Human Machine Interfaces (HMI) for our industrial automation systems. Integrate a wide range of industrial automation solutions, including Programmable Logic Controllers (PLC), Distributed Control Systems (DCS), and Human Machine Interfaces (HMI). Understand existing code and generate required design documentation, code changes, test procedures, and test the functionality as implemented. Take responsibility for the development and documentation associated with the project's software systems, encompassing control system electronics hardware, electro-mechanical interfaces, compliance with machine specifications, and adherence to applicable standards. Identify, solve/debug, and report problems in the field for control systems, such as sensors, HMI (Human Machine Interface), servo drives, and PLCs. Develop operation manuals and other pertinent documentation to support end-users and maintenance teams. Utilize design software tools like SolidWorks Electrical, E-Plan, and AutoCAD for design, concept, and layout purposes. Provide support during prototype builds and contribute to product releases into production. Assist with the design, development, testing, and reporting for new product development projects. Interface with the vendor to develop state-of-the-art technology, participate in design review, review/approve test and validation protocols and reports, and transfer all documentation, and PLC programs, including the PCB Gerber files, to the internal ERP system. Involvement in wireless communication and integration of IoT wireless networking (Wi-Fi, Bluetooth, RFID, mesh networks). Lead Firmware design and development projects. Basic Hiring Criteria: 4+ years of experience in a similar role with progressive growth and scope of responsibilities. Bachelor's degree or higher in Electrical Engineering, Engineering or related field. Control systems, Computer programming, Project management, Problem-solving and analytical skills. Strong leadership and communication skills, strategic thinking and planning, strong organizational skills, and ability to work collaboratively in a global team environment.

Join an innovative and creative organization since 1958! Join one of the most respected brands in the market! As a Systems Technician, you will be responsible for the design, development, installation, modification, maintenance, and repair of industrial electrical and electronic control systems. You will work alone and with different teams that can include Maintenance Technicians, Production Engineers, Operators/Supervisors, and Contractors. In this position you will be expected to be able to work under general supervision, receiving occasional instruction or assistance as new or atypical situations arise. This role requires strong electrical and PLC troubleshooting skills. Responsibilities: Complete assigned Preventive Maintenance and Non-PM work orders to maintain equipment up-time. Suggest the addition of PM tasks based on review of controls related downtime. Troubleshoot PLCs, VFDs, and other components connected to those systems. Read, and interpret P&ID's and wiring diagrams to locate, identify, troubleshoot, and repair plant systems, interlocks, etc. Work with a variety of groups to diagnose equipment malfunction in a timely manner. Install, maintain, repair, and replace electronic and electrical components of equipment and machinery. Install conduits, wires, pull boxes, switchboards, controllers, and switches required in making minor additions, extensions or alterations in industrial electrical systems. Recognize safety hazards and follow safety guidelines for personal protection and protection of fellow workers. Complete written and electronic records (i.e., work orders, calibration sheets, timecards, material requests) required to document work in progress and work completed. Respond to emergency situations as needed, including after hours. Participate in plant shutdowns as needed, including holidays and weekends. Requirements High school diploma or equivalent Strong communication skills in the English language (written, verbal, inter-personal) 10 years of experience with Allen Bradley PLCs and VFDs. Experience with Parker drives. Network experience with switches and Ethernet IP. Experience in modifying HMIs. Experience with tuning PIDs. Experience with winding machines. Knowledge and experience with industrial power design, including medium and low voltage electrical power distribution, motor control and VFDs. Coordinate work assignments with other departments and employees.

DIRECT CANDIDATES ONLY, IF INTERESTED APPLY THROUGH JOB POST. NO DIRECT MESSAGES. RECRUITERS: DO NOT CONTACT. SUMMARY OF THE JOB The Senior Manufacturing Technician will support Engineering development and validation activities in addition to production support. This position will be a key contributor on Bolt's Engineering team, developing a therapeutic medical device. Responsibilities: Demonstrate strong problem-solving skills and have the ability to ask critical questions without being the subject matter expert • Interact with Engineering to ensure that processes and designs are manufacturable • Design manufacturing processes, procedures and production layouts for assemblies, equipment installation and material handling • Fixture design and development including mechanical design, tolerance analysis and material selection • Strong problem-solving skills • Organization of equipment and spare part inventory • Maintain equipment documentation including manuals • Author IQ protocols and reports • Participate in process improvement projects to improve product quality, reduce rework / scrap, decrease cost, and improve product performance. • Identify and troubleshoot process-related issues and implement corrective actions • Demonstrate hands-on process understanding and provide guidance and training to operators • Support daily production to ensure on-time delivery of quality products • Assist in scaling up equipment and processes from prototypes to pilot to full scale manufacturing • Performs preventative maintenance for all equipment Qualifications: Required Experience: • Must have 3+ years operating EDM or CNC mill/lathe • Fixture and tooling design to assist with manufacturing needs and process improvements • Manufacturing or sustaining experience • Medical device experience a plus Knowledge, Skills, and Abilities: • Strong communication and organizational skills. • Continual improvement process experience. • Demonstration of excellent organizational skills with the ability to adapt to a rapidly changing environment.

Job Title: Electrical/ RF Calibration Technician Schedule: Monday-Friday, 8:00 AM - 5:00 PM (Some Overtime) Salary: $30-65 per hour, depending on experience (DPE) Micro Quality Calibration (MQC), established in 1978, is a leading A2LA ISO/IEC 17025-2017 Accredited Metrology lab specializing in calibration, repair, testing, and sales of precision measurement instruments. Serving industries like Aerospace and Medical, MQC is known for quality, customer service, and growth. Position Overview: We are looking for experienced Calibration Technicians specializing in Electrical/RF Calibration. You'll ensure the accuracy and reliability of clients' measurement instruments, requiring precision, organization, and communication. Responsibilities: Calibrate RF/Microwave instruments (Signal Generators, Spectrum Analyzers, Network Analyzers, Power Sensor, Power Meter, etc.) Calibrate electronic instruments (Digital Multimeters, Oscilloscopes, HiPot Tester, Frequency Counters, Power Supplies, etc.) Calibrate to standards and generate reports Inspect equipment and collaborate with engineers Provide technical guidance during audits Maintain safety and troubleshoot equipment All calibration is to be performed in accordance with NIST traceable standards. MQC is A2LA Accredited to ISO/IEC 17025, ANSI/NCSL Z540.3-2006, and ANSI/NCSL Z540-1-1994. Requirements and Skills: Calibration experience required; Military PMEL/TMDE/DOD training preferred. Familiarity with ISO 17025 standards. Strong attention to detail and excellent communication skills. Organizational, time management, and prioritization abilities. Strong problem-solving and critical thinking skills to meet deadlines effectively. U.S. Citizen or U.S. Permanent Resident Status required. Valid driver's license and clean driving record. Benefits: MQC offers comprehensive benefits including 401(k) with matching (with a 4% match) Dental, Health, Vision, Life Insurance Paid time off, Referral program We are an Equal Opportunity Employer

Must be a US Citizen. Calibrates instruments to meet established conformance standards. Tests instrument accuracy and makes adjustments as necessary. Requires a high school diploma or its equivalent. May be required to complete an apprenticeship and/or formal training in area of specialty. Requires 2-4 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Special Considerations: Lifting is generally in the 10 to 15 Lbs. range with minimal repetitions. Exposure to machinery, chemical, biological, and physical risks is minimal. Required Skills Calibration experience (Pressure, Scales, ESD, Temperature) Required Education z540/iso 9001 Required Years of Experience 1-3 years Desired Skills ISO 17025 calibration lab experience Quality database experience Desired Education Desired Years of Experience 2-5 years

An aerospace client is looking for a Mechanical Technician to perform a variety of tasks ranging from repetitive to non-repetitive operations in the development of mechanical and electromechanical designs, tests, fabrications, modifications, assemblies and components. Location: Redondo Beach, CA 90278 (On-site) Position: Mechanical Technician Pay Rate: $21.57/hr. - $25.85/hr. on W2 Duration: 9 months or longer Schedule: 1st Shift (9/80A) ***Willing to work weekends as needed.*** RESPONSIBILITIES: Support the Mechanisms and Sensor area. Devices, fabricates, and assembles new or modified mechanical components or assemblies. Sets up and tests complete mechanical units and subassemblies under operational conditions. Assisting engineers in the development of mechanical and electromechanical engineering designs, tests, fabrications, modifications, assemblies and components. Precision cleaning and lubricating of various hardware. Must be able to work with various chemicals and solvents. Working from written instructions that provide methods and sequence of assembly operations. Using assembly drawings and diagrams. Performs a variety of tasks ranging from repetitive to non-repetitive operations on electronic and/or mechanical assemblies and subassemblies. Perform a variety of tasks including but not limited to mechanical assembly, precision soldering, harness routing, bonding, electrical test using test procedures and other comparable tasks using tools such as solder irons, torque wrenches, machine tools, multimeters. Individual must be able to demonstrate to Quality Assurance that work performed meets engineering drawing requirements. Read, interpret and understand engineering drawings. Work in clean room environments with gown. BASIC QUALIFICATIONS: US Citizenship is required. High School Diploma or General Education Diploma (G.E.D) required and 0 years additional education and/or mechanical assembly experience. Willing to work weekends as needed. Knowledge and experience with the use of a variety of hand tools and mechanical equipment. Strong work ethic, positive attitude and willingness to learn. Ability to work in diverse teams of design engineers, manufacturing engineers and technicians. PREFERRED QUALIFICATIONS: Experience using common hand tools and calibrated tools Torque Wrenches, Heat Guns, Crimp Tools, Soldering Irons, Thermal Wire Stripers, Microscopes, Thermal Chambers/Ovens, etc. Strong communication skills. Familiar with electromechanical assembly. Have common knowledge of precision type assembly work. Past experience building spacecraft structures, sub-structures, deployable', hinges and electromechanical assemblies. Work independently with minimal direction. Installing/bonding heaters, thermistors, thermostats onto assemblies. Installing gears, electrical motors. Thermally install interfaces. All parts will be properly assembled together. About our client: Our client is a world leader and premier innovator in aerospace, with over 100,000 top-talent employees providing the most advanced products and technologies in the industry. With numerous awards and recognitions, they offer their employees continuous growth, learning, and development. About APR: Since 1980 APR Consulting, Inc. has provided professional recruiting and contingent workforce solutions to a diverse mix of clients, industries, and skill sets nationwide. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. Don't miss out on this amazing opportunity! If you feel your experience is the match for this position please apply today and join our team. We look forward to working with you!

The LED Technician will be based out of our Chatsworth, CA location. This is an intermediate-level position at a globally leading LED display manufacturer. The candidate will be responsible for responding to customer technical support requests, training field technicians on the proper use of LED screens and LED processor equipment, and traveling throughout North America to provide on-site technical support. The LED Technician will work directly with our customers and collaborate closely with the technical, quality control, sales, and warehouse teams to ensure customers receive the best service and support. This is a highly collaborative role, which requires excellent organization, attention to detail, clear communication, and a passion for problem-solving. Responsibilities Reporting to the in-house Technical Manager, the LED Technician provides the following contributions to the team: Responds to customer support requests via phone and email Updates and documents client issues and communicates information on reported product defects to management Maintains a professional, helpful, and positive demeanor in all interactions with clients and partners Assists with project builds and tear downs at on-site and off-site locations Frequently travels for installations, on-site training, technical support, and product demonstrations - Travel makes up 50-75% of this position Assists with the planning, installation, and operation of exhibitions at multiple tradeshows annually Responds to customer support requests via the 24/7 tech support phone line (shared responsibility with the Technical Support team) Qualifications To succeed in this role, you have the following skills and qualifications under your belt: 2+ years field experience installing LED video systems in the touring or live-events industry Extensive knowledge of LED video-related products and subsequent terminology Knowledge and experience supporting Windows operating systems Strong analytical and troubleshooting skills An ability to work independently to interface with customers and provide solutions to technical support requests Strong attention to detail Excellent written and verbal communication skills Customer support experience Available to travel on short notice, outside of standard work hours (Therefore a valid driver's license and passport are required) Must be able to lift 50 lbs Preferred Skills Experience with ROE LED products and processing systems Familiarity with media servers Familiarity with Vectorworks and/or AutoCAD Bilingual (Spanish/Chinese) The salary range for this position is $70,000-85,000 USD annually. The base pay offered may vary depending on job-related knowledge, skills, and experience. Benefits include a comprehensive healthcare plan (including vision and dental), 401K options, paid sick and PTO structure, office snacks, and more. Who We Are ROE Visual is the leading LED creative display manufacturer in the industry. With adaptive LED platforms for every installation, they're committed to going the extra mile for any creative vision. Carefully selected high-end components, the latest technology, in-depth knowledge, and stores of passion go into every product that bears the ROE name. Being familiar with the challenges of their market, ROE offers only the most intuitive solutions for the creatives, designers, and technicians who rely on their LED products to deliver a flawless performance every time. This quality standard is the reason ROE has quickly become the industry standard, making its way onto stages and the big screen worldwide. Your Stage. Our Passion.

To save time applying, Toyota does not offer sponsorship of job applicants for employment-based visas or any other work authorization for this position at this time. TRD inspires the hearts and minds of racing fans, Toyota team members, customers, and the driving public. We are dedicated to advancing automotive engineering and maximizing racetrack success. We partner with the finest race teams and drivers who share our passion, and our actions foster an atmosphere of excellence. In our pursuit of becoming the most respected and premier motorsports engineering organization in the world, we are looking for highly motivated applicants for our available positions. Who were looking for: TRD is looking for a highly motivated and experienced Technician (Contract) to join our Engine Measurement team. This position is located in Costa Mesa, CA. What you'll be doing: Responsible for the operation of the test cell/s to complete testing according to the Development or Production schedules and the specific test plan. Operation of the test cell includes but is not limited to: Installing the engine or Unit Under Test (UUT) according to TRD SOP Preparing the UUT under test to run by making all neccesary electrical, hydraulic, pnuematic, exhaust and mechanical connections Fitting any non standard equipment requested on the test plan Preparing the test cell subsystems such as the oil, water, fuel and combustion air conditioning systems Starting and running the UUT per test cell SOP's and the specific engine test plan Monitoring the UUT undertest using direct visual contact, remote monitors, on screen data and also by listening to detect any potential problems or deviations from the established norm Adjustment of UUT or change of test configuration during the test period as required Communication of test status to relevant Engineering and Operations staff as required Communication of any issues with the UUT or test cell to the relevant Enginnering and Operations staff using the Oneplan system as needed Removal of UUT for shipping or return to Engine Build Cleaning of test cell in preparation for next test Collaborate to assure fixturing and tooling is assembled and available in-sync with the production schedule. Responsible to keep the test cell/s and all sub components in good working order and in a state of readiness to meet schedule demands. This is typically accomplished by but not limited to: Following the routine maintenance schedule as directed by either OnePlan or the Test Supervisor Visually inspect the test cell systems and environment for any potential future issues Daily cleaning of the test cell in readiness for the next test Use 5S and Kaizen principles to support continuous improvement of the testing process by raising issue to the Test Supervisor and making suggestions for improvement. What you'll bring: High attention to detail with monitoring engine/operation parameters and the test cell environment while running an engine dynamometer. Experience operating, without supervision, an engine dynamometer test cell. Good mechanical aptitude and sensitivity for wrenching on engines and equipment. Ability to apply knowledge of automotive systems and components to diagnose engine/equipment problems. Experienced with common mechanic and metalworking shop equipment and operational techniques. Experience selecting and applying fasteners, fittings, materials, and components common to our industry. Minimum High School Diploma or GED Experience using PC (office package) and software in general. Added bonus if you have: Vocational College graduate with an Associates of Science Degree in the automotive, electronics or manufacturing technologies field Experience on building engines and in particular heads and valvetrains in pushrod engines. Experience with engine dynamometer test cell. Experience with Fabrication: welding, sheet metal, light manual machining (Lathe & Mill) & tube bending. Understanding about the proper use and handling of electronic instruments and devices. Ability to perform simple wire soldering and cable connections. If you are interested in applying for this role, please submit your resume to the following email address ************************

Job Title: Robotic Technician Department: Robot Annex Reports to: Facilities Director FLSA Status: Part-time, Non-exempt Pay Scale: $25.00 - $28.00/hour Schedule: On-site, Two Weekdays and One Weekend Day, 9am - 6pm Summary: The Robotic Technician is responsible for assisting students, faculty and staff in the completion of coursework and research using the Robot Annex Facilities, which includes the ABB IRB 6700 and related tools. Within a busy and fast-paced Academic environment, the Robotic Technician will also be responsible for advising all Annex users. This position reports to the Facilities Director. Essential Duties and Responsibilities: Assist in supervising robot operations and other work within the Robot Annex Process and troubleshoot digital files Enforce Annex policies and protocols Assist in the training and supervision of students and faculty Repair and maintenance of robot and equipment Maintain a clean Annex Tool circulation and inventory tracking Working with students and faculty to complete construction of fixtures, jigs for Annex Other tasks, as assigned Qualifications: Working knowledge of robot control software and related design software (ABB RobotStudio, Rhino, Grasshopper) Minimum 1 year experience operating 6 axis robot arms Minimum 1 year experience with utilizing, developing, and maintaining robot end-arm effectors (could include ceramic extruders, plastic extruders, routers, grippers) Metalworking experience (welding, cutting, bending and finishing) preferred Hardware programming (Arduino) and wiring preferred Comfortable wearing the appropriate respiratory equipment for work in a dusty environment, or where fumes are present, along with any other required safety equipment (face shields/goggles/protective clothing) Be able to lift and maneuver up to 50 lbs. Must be able to work weekends, evenings and some holidays as needed We offer part-time employees paid time off. SCI-Arc is an Equal Opportunity Employer.

Join AMETEK Programmable Power, a leader in cutting-edge programmable power solutions and systems. We specialize in designing and delivering precision AC and DC programmable power supplies, electronic loads, power subsystems, and compliance test solutions. If you're ready to work at the forefront of differentiated power technologies, this is your opportunity to make an impact in a fast-paced, high-tech environment! Job description: About Us: Join AMETEK Programmable Power, a leader in cutting-edge programmable power solutions and systems. We specialize in designing and delivering precision AC and DC programmable power supplies, electronic loads, power subsystems, and compliance test solutions. If you're ready to work at the forefront of differentiated power technologies, this is your opportunity to make an impact in a fast-paced, high-tech environment! Job Summary: As the production Technician, you will be responsible for conducting a variety of tests, including manufacturing verification, engineering validation, functional performance, and ground fault isolation on production units. The position will troubleshoot both digital and analog circuitry to the component level, determining the cause of any malfunction and recommending adjustments/repair to restore the product to working order. 1st Shift: Monday through Friday, 5:30 AM to 2:30 PM Overtime: Ability to work overtime Monday through Friday and on weekends occasionally. Key Responsibilities: Set up and operate various types of standard and specially designed test equipment. Identify need for fixtures or equipment needed in support of unique or special testing requirements. Calibrate, align, adjust, and perform final functional test for each unit for customer shipment. Working from specifications, test procedures, data sheets, engineering drawings, wiring diagrams/schematics, and/or verbal instruction. Log production test data, including but not limited to, work order, model number, serial number, test status (pass/fail), and failure mode. Diagnose and determine cause and remedy for defective assemblies, parts and/or components; identify, characterize, and document defects to ensure reproducibility of documented defect. Troubleshoot to component level for both analog and digital circuitry. Report increased trends in failures to appropriate parties, initiating root-cause investigations. Perform physical inspection of product to ensure compliance to specification and cosmetic requirements. Operate equipment and instruments safely and according to proper procedures; exercising the necessary precautions to prevent damage to test equipment and instrumentation. Other duties as assigned. Minimum Qualifications: Minimum of 6 years of related experience. Technician levels 3-5 will vary based on years of experience and scope of responsibilities. Electronic Technician Certificate and/or AS Degree in Electronic Engineering. Due to the nature of our programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code. Available to work over-time. Desired Qualifications: Strong Analytical skills, ability to problem solve, attention to detail and technical acumen. Experience in production test and troubleshooting environment. Solid background in testing, debugging, and troubleshooting of electromechanical equipment to the component level. Experience working with standard test equipment such as oscilloscopes, RMS meters, high power conversion equipment, etc. Must be able to identify both surface mount and through-hole components, including component values/color-coding. Working experience using mechanical hand tools. Must perform moderately complex math and be able to read, understand, and adhere to technical documents and procedures. Efficient MS Word and Excel User. What's in It for You: Competitive compensation, holiday pay, and paid time off Great benefits package that includes health, vision, and dental insurance 401(k), plus matching Flexible spending accounts (FSAs), health savings account (HSA) with AMETEK contribution, life insurance, disability insurance, and family medical leave Employee referral program Tuition reimbursement program Employee assistance program Exciting, fast-paced environment where you could make a true impact Opportunities for career advancement within our business unit and across all other AMETEK business entities Additional Details: Work Environment Production environment Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. This position requires the ability to lift 25 pounds. Location Information: This role is based in San Diego, California, a city renowned for its idyllic blend of sun, sea, and vibrant culture. With a coastal climate and over 70 miles of stunning coastline, it's a haven for beach lovers and outdoor enthusiasts year-round. Explore diverse museums, the historic Gaslamp Quarter, and Balboa Park's gardens and world-famous zoo. Enjoy an active lifestyle with parks, trails, and water sports. Relish international cuisine and experience unique neighborhoods like lively North Park and coastal La Jolla. San Diego offers an irresistible mix of relaxation and adventure. Salary Range: The annual pay range for this position generally ranges between $30.00 - $40.00 Actual salaries will vary and may be above or below the range based on various factors including but not limited to location, experience, and performance. In addition, AMETEK provides a variety of benefits to employees, including health insurance coverage, an employee assistance program, life and disability insurance, a retirement savings plan, paid holidays and paid time off. To learn more about our company and our job opportunities, visit us at: ****************************** To learn more about the business unit you'll be joining, visit us at: Programmable Power: ********************************** We offer: What's in It for You: Competitive compensation, holiday pay, and paid time off Great benefits package that includes health, vision, and dental insurance 401(k), plus matching Flexible spending accounts (FSAs), health savings account (HSA) with AMETEK contribution, life insurance, disability insurance, and family medical leave Employee referral program Tuition reimbursement program Employee assistance program Exciting, fast-paced environment where you could make a true impact Opportunities for career advancement within our business unit and across all other AMETEK business entities

This is 100% onsite at location on req about 50% of the time and at 40 Parker Irvine CA (20 mins about, from location on req- flexible depending on business needs) Schedule: M-F 8 hrs per day (8-5 with 1 hour non-billable lunch flexible depending on business needs) Top Important skills/Responsibilities: Set-up battery cell into fixtures and test systems to conduct cell testing based on engineering direction. Register and handle cells following SOP Perform daily maintenance of on-going battery lifetime testing. This is what you'll do: Set-up battery cell into fixtures and test systems to conduct cell testing based on engineering direction. Register and handle cells following SOP Perform daily maintenance of on-going battery lifetime testing. Review cell test progress and notify cell engineers if there is an issue during the testing process. Fabricate test fixtures and harnesses as directed by engineers. Develop operating procedures and provide facility updates through presentations to engineering team as needed. Work with laboratory equipment manufacturers to troubleshoot equipment issues. Follow general laboratory maintenance procedures and safety practices. Perform routine maintenance on cell test equipment. Perform routine calibration of cell test equipment. Qualifications Proficiency in general computer software (Word, Excel, PowerPoint, Remote Desktop Connection). Proficiency in troubleshooting issues for tools/hardware using various protocols (Ethernet/IP, CAN). Strong communication and interpersonal skills. Attention to detail when handling test samples and troubleshooting test set-ups. Strong hands-on skills and experience with light machine tools, especially for fabricating harnesses and test fixtures. Strong hands-on experience using multimeters, soldering iron, wire strippers, etc. Creative and critical thinking skills when fabricating new test set-ups or troubleshooting testing issues. Basic knowledge of electrical circuits and the ability to read wiring diagrams. Basic awareness of safety protocols around high voltage equipment and lithium-ion batteries. Ability and self-motivation to work in a very fast-paced environment.

Job Title: Battery Test Technician Job Type: 8 Month Contract (with chance for extension) Schedule: Monday - Friday, 8:00 AM - 5:00 PM (1-hour non-billable lunch) Position Overview: Rivian is seeking a Battery Test Technician to support the engineering team in performing battery cell testing and maintenance. This is a hands-on role with approximately 50% of the time spent onsite and the remaining 50% at our facility located in Irvine, CA. The ideal candidate will have experience with battery testing, electrical circuits, and troubleshooting equipment. Key Responsibilities: Set up battery cells into fixtures and test systems for cell testing based on engineering direction. Register and handle battery cells according to Standard Operating Procedures (SOP). Perform daily maintenance of ongoing battery lifetime testing. Review test progress and communicate any issues or concerns to the engineering team. Fabricate test fixtures and harnesses as directed by engineers. Develop and update operating procedures as needed; present updates to the engineering team. Collaborate with laboratory equipment manufacturers to troubleshoot and resolve equipment issues. Follow standard laboratory maintenance procedures and safety practices. Conduct routine maintenance and calibration of cell test equipment. Ensure compliance with safety protocols, especially in handling high-voltage equipment and lithium-ion batteries. Required Skills and Qualifications: Proficiency in general computer software (Word, Excel, PowerPoint, Remote Desktop Connection). Experience troubleshooting hardware and tool issues, including Ethernet/IP and CAN protocols. Strong communication and interpersonal skills. Attention to detail in handling test samples and troubleshooting test setups. Hands-on experience with light machine tools for fabricating harnesses and test fixtures. Strong hands-on experience using multimeters, soldering irons, wire strippers, etc. Creative problem-solving skills when fabricating new test setups or resolving testing issues. Basic knowledge of electrical circuits and ability to read wiring diagrams. Awareness of safety protocols when working with high-voltage equipment and lithium-ion batteries. Ability to work in a fast-paced, high-pressure environment with strong self-motivation. Preferred Qualifications: Experience working in a laboratory or manufacturing setting related to battery testing. Experience with cell testing systems or equipment maintenance. Basic understanding of battery technologies, especially lithium-ion.

Our Client, a vehicle automaker and automotive technology company, is looking for someone to join their team as a Battery Test Technician! in Tustin, CA*** What You Will Be Doing Set-up battery cell into fixtures and test systems to conduct cell testing based on engineering direction. Register and handle cells following SOP Perform daily maintenance of on-going battery lifetime testing. Review cell test progress and notify cell engineers if there is an issue during the testing process. Fabricate test fixtures and harnesses as directed by engineers. Develop operating procedures and provide facility updates through presentations to engineering team as needed. Work with laboratory equipment manufacturers to troubleshoot equipment issues. Follow general laboratory maintenance procedures and safety practices. Perform routine maintenance on cell test equipment. Perform routine calibration of cell test equipment. Required Skills & Experience Proficiency in general computer software (Word, Excel, PowerPoint, Remote Desktop Connection). Proficiency in troubleshooting issues for tools/hardware using various protocols (Ethernet/IP, CAN). Strong communication and interpersonal skills. Attention to detail when handling test samples and troubleshooting test set-ups. Strong hands-on skills and experience with light machine tools, especially for fabricating harnesses and test fixtures. Strong hands-on experience using multimeters, soldering iron, wire strippers, etc. Creative and critical thinking skills when fabricating new test set-ups or troubleshooting testing issues. Basic knowledge of electrical circuits and the ability to read wiring diagrams. Basic awareness of safety protocols around high voltage equipment and lithium-ion batteries. Ability and self-motivation to work in a very fast-paced environment.

We pride ourselves on building lasting relationships. We do this through our unique ongoing touchpoint program, personalized orientation, bi-yearly appreciation lunches, company-sponsored charitable events, and our flagship family Woodward Dream Cruise event. We also offer industry-leading benefit options: Four (4) healthcare plans to choose from PTO & Paid Holidays Dental & Vision insurance Company-paid life insurance Long and short-term disability 401k with yearly arbitrary match Pet insurance You can count on Blue Chip Talent to be your reliable career coach and advocate. We look forward to connecting with you and guiding you on your career goals. What you'll be doing: In this role, you will be responsible for setting up battery cells in fixtures and test systems according to engineering instructions Monitor cell test progress and promptly alert engineers to any issues during testing Conduct regular maintenance on cell test equipment Need to have: Knowledge of safety protocols around high voltage equipment and lithium-ion batteries Knowledge of electrical circuits and the ability to read wiring diagrams Experience in troubleshooting issues for tools/hardware *Blue Chip Talent will not be sponsoring visas or accepting C2C for this position at this time. Blue Chip Talent is an Equal Opportunity Employer (EOE) that values merit-based recruitment centered around technical ability, skillset, and personality/cultural fit with our employing partner

Nestled between Burbank and Pasadena, Adventist Health Glendale is one of the area's leading healthcare providers. We are comprised of a 515-bed hospital, two urgent cares, home care services, comprehensive cardiology care and a vast scope of services located in the San Fernando Valley. We are committed to the development and empowerment of our nurses and have received Magnet designation from the American Nurses Credentialing Center. Glendale is known for its urban living, with easy access to dining, entertainment, shopping, amusement parks and outdoor recreation. Adventist Health Glendale is proud to be part of the thriving, diverse community since 1905. Job Summary: Delivers coordinated nursing care for a patient or an assigned group of patients according to established standards of care and the nursing process. Supervises and directs the activities of various levels of assigned nursing staff, and coordinates care with other disciplines while utilizing critical thinking, professional and supervisory discretion, and independent judgment. Job Requirements: Education and Work Experience: * Bachelor's Degree in Nursing (BSN): Preferred * Acute care facility experience: Preferred Licenses/Certifications: * Registered Nurse (RN) licensure in the state of practice: Required * Cardiopulmonary Resuscitation (CPR) or Basic Life Support (BLS OR HS-BLS OR RQIBLS) certification: Required Department Specific License/Certifications: * Advanced Cardiac Life Support (ACLS) or Healthstream Advanced Cardiac Life Support (HS-ACLS) or RQIACLS: Required * Neonatal Resuscitation (NRP): Required Essential Functions: * Collects relevant data pertinent to the patient's health or situation. Analyzes the assessment data in determining diagnosis and care issues. Develops a plan that prescribes interventions to attain outcomes. Implements the plan, coordinates care delivery, and employs strategies to promote health and a safe environment. Evaluates progress toward attaining outcomes. Identifies outcomes for the patient or the patient's situation. * Collaborates with the team of patient, family, and healthcare providers in providing patient care in a safe, healing, humane, and caring environment. Provides learning opportunities for patients/family members and team members. Directly provides health information to patients, families, and treatment team. * Participates in discharge planning in order to provide continuity of care. * Delegates appropriately and coordinates duties of healthcare team members. * Performs other job-related duties as assigned. Organizational Requirements: Adventist Health is committed to the safety and wellbeing of our associates and patients. Therefore, we require that all associates receive all required vaccinations, including, but not limited to, measles, mumps, flu (based on the seasonal availability of the flu vaccine typically during October-March each year), COVID-19 vaccine (required in CA, HI and OR) etc., as a condition of employment, and annually thereafter. Medical and religious exemptions may apply. #Tech-SJ Pay: $23.69 - $30.91 per hour Benefits: * 401(k) * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Medical Specialty: * Ob/Gyn Schedule: * 12 hour shift Work Location: In person

Permit Technicians are in high demand and we're interested in what you want and where you see yourself going. If you're curious about other opportunities, perhaps want to earn more money, or would like to work where you'll be appreciated...call us, we can help. We have positions at cities for Full-Time & Part Time. VCA Code offers outstanding benefits and compensation. Duties will include, but are not limited to: Great customer service persona: friendly, helpful and courteous Processing permits at the counter Various administrative duties, assisting the building official or others May include collecting funds, balancing accounts, filing, etc. The successful candidate should possess: Basic Data Entry skills Excellent interpersonal skills Ability to understand and work well with the public Capable of working in a fast-paced environment Typing speed of 45 WPM Capable of learning and utilizing multiple types of software (Energov, MS Suite, Adobe, etc.) We welcome candidates with construction industry experience and /or experience working at a city serving the general public. If you're interested in making a difference and helping others, let's talk. After all, the smartest people keep their options open! ICC Certified Permit Technician is preferred. VCA Company Overview and Benefits: For more than 40 years, we've been assisting cities and counties by providing qualified, friendly and experienced staff. VCA is a very stable and highly appreciated organization because of people like you…quality professionals serving multiple jurisdictions. And VCA has unparalleled benefits such as: 100% paid health for the employee. Plus dental, vision, matching city holidays, paid vacation, paid sick time, and a 401(k) Matching Plan. VCA assists with training and certifications. Join a great city and make a difference! Email your resume today. P.S. Please feel free to forward this document to someone you think highly of or give them my contact information. Thank you! ***Compensation will be measured based on sliding scale of experience and skills*** Must be able to pass a LiveScan.

Senior Building Automation / Controls Technician job in Orange County, CA This is a permanent, full time position with a great salary and benefits package. Responsibilities: Coordinates with mechanical contractors for installation Complete commissioning and testing of systems Troubleshoot and repair local controllers, communication wiring, and programs Identify code issues Train and mentor apprentices and more junior technicians to grow within the company Requirements: Associates in Electronics or Vocational Certifications in HVAC/Electrical Controls Systems 3 years' experience in building controls and automation, including installation, troubleshooting, diagnosis and repair of emergency management systems. Proficient in BAC HVAC Software/Programming and Building Automation Systems