Controls Technician Jobs in Bensenville, IL

Job Title: Sr. Field Service III Responsibilities Perform daily inspection of robots and connected equipment Boot up associated systems and troubleshoot any issues Set up environments and help robots perform pre-defined use cases Record and document system performance, issues, and suggestions for improvement Help customers pick and replenish goods required to test the robot operations SKILLS AND REQUIREMENTS: Experience with command line interface on linux systems Writing procedures and/or work instructions Experience training others a plus Worked with AMRs before is a plus Has worked in a professional setting (medium level of responsibility) Has interfaced with customers Problem-solving in high pressure situations Proponent of new technologies High level of attention to detail Good situational awareness with ability to assess and document system status EDUCATION and/or EXPERIENCE High School diploma or GED required

About: With over $2B in revenue, 80+ manufacturing facilities across 6 continents and over 9,000 employees worldwide, Signode is a leading manufacturer of a broad spectrum of transit packaging consumables, tools, software, and equipment that optimize end-of-line packaging operations and protect products in transit. Signode brings this extensive product portfolio together under hundreds of trusted brands to offer complete transit packaging solutions to its customers. We produce strap, stretch and protective packaging. We also manufacture packaging tools and equipment used to apply the bulk packaging materials. These commercial packaging products are used to pack, bundle, unitize, protect and secure goods during warehousing and transit. Our company is a materials, processes and automation technology that have revolutionized the sector. Headquartered in Tampa, Florida, we are proud to be the Transit Packaging Division of Crown Holdings, Inc. We are excited to go to market as Signode and to share the portfolio of products, services and capabilities that make us the world's premier end-of-line packaging company. Benefits: Signode offers a comprehensive benefits package to full-time employees, which includes health, dental, vision, 401k, paid time off, life insurance, wellness perks, and more. Benefits begin the month following the hire date. Salary: $38.00/hourly Summary: Performs troubleshooting and repair on electrical/electronic, hydraulic, pneumatic mechanical systems. Analyzes, troubleshoots, and repairs equipment. Assist with the servicing and repairing of more complex equipment. Complies with applicable regulations and the department's Safety program. Essential Functions: Solving electrical and mechanical issues on production. Reading, analyzing, and interpreting technical procedures, blueprints, service manuals, and work orders to perform required maintenance work. Conducts preventive maintenance schedule. Dealing with incoming work requests. Communicating existing and potential issues with your group leaders and/or maintenance manager. Abiding by different safety measures and policies. Qualifications Education: Minimum High School diploma or GED and electrical apprenticeship and/or vocational school/technology certificate in electricity. Experience: Five (5) years of electrical technical hands-on experience including wiring automation machine control panels and PLCs. Must have a good working knowledge of electricity and troubleshooting electrical issues including 480 volts. Ability to troubleshoot control circuits, motors, motor control circuits, and other electrical and electronic systems and equipment. Ability to read electrical blueprints and schematics and apply NEC requirements. Ability to use appropriate hand, power and specialty tools and diagnostic equipment to complete job tasks. Ability to read, use and understand gauges, tools and instruments relating to product quality and equipment repair. Ability to work independently. Must have sound knowledge and experience in Industrial Maintenance environment with repair and troubleshooting machine issues and breakdowns along with general maintenance. Must have a good working knowledge of mechanics and troubleshooting mechanical issues. Must have experience in welding with MIG and/or arc welder. Must have a good working knowledge in hydraulic, pneumatic, pumps, valves, cylinders, conveyors, etc. Forklifts and scissor lift driving experience is preferred but not necessary. Lathe operation experience is preferred but not necessary. Must have organization and housekeeping skills. Must have good communication skills throughout all levels of the organization. Willingness to work on 1st, 2nd, or 3rd shift, overtime and weekends as required. Functional Success Drivers: Problem Solving Adaptability Training and Development Communication (Oral & Written) Patience Reasonable Accommodation Statement To perform this job successfully, the individual must be able to perform each essential duty satisfactorily. Reasonable Accommodations may be made to enable qualified individuals with disabilities. The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. Signode Industrial Group, LLC is an Equal Opportunity / Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability or protected veteran status.

The Calibration Technician B will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician B will identify and utilize appropriate manual and automated measurement procedures. This position will normally receive no instruction on work, applying job skills and company policies and procedures to complete a wide range of difficult tasks, and working on assignments that are moderately complex in nature where judgment is required in resolving problems and making routine recommendations. The Calibration Technician B will perform laboratory housekeeping and may perform some administrative duties. The Calibration Technician B may be asked to report opinions and interpretations. Responsibilities and Duties Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines - Acoustical, Chemical, Dimensional, DC/Low Frequency, RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency, in order to ensure compliance with published specifications Maintain primary and/or intrinsic calibration standards Maintain secondary and/or working calibration standards Perform maintenance, troubleshooting and repair of precision equipment Develop calibration procedures and methods, according to detailed specifications, blueprints, drawings, and other technical requirements Collect, compile, measure, summarize, and record data gathered during calibration. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc Identify and correct measurement errors, as applicable Prepare calibration reports and certificates Adapt existing calibration equipment, standards, and techniques to accomplish unique measurements tasks for which they are not principally used Perform uncertainty evaluation and analysis for measurement standards and associated measurement processes Train subordinates in calibration concepts and procedures Interact with other technicians, Customer Service Representatives, Account Managers, and customers Other duties and responsibilities as may be assigned Qualifications Minimum High School diploma or equivalent Must be able to perform general math and algebra functions Understanding of Basic Statistics Must possess good written and oral, communication skills Technical writing ability Intermediate ability to troubleshoot repair, align and optimize precision equipment Intermediate computer skills Proficient in use of MS Word and Excel Minimum three years of calibration experience some of which can be offset with formal metrology training Knowledge of Quality Management system (ISO 9001, ISO 17025 and ANSI Z540) Must have great interpersonal and customer service skills Strong attention to details Must be a self-motivator, work as a team player, and follow written procedures Physical Demands Must be able to lift up to 45 pounds without assistance Occasional standing and bending are required Working Environment Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites Travel may be required to other domestic and possibly international locations What We Offer Full - Time, non-exempt position Excellent benefits package includes medical, dental, vision, disability, life insurance, 401(k) with company matching, employee funded pre-tax health and tuition reimbursement Vacation, sick and paid holidays SIMCO provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, SIMCO complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, and transfer, leaves of absence, compensation and training.

Hiwin Corporation is the leader in the innovation and manufacturing of motion control and mechatronic system technology. We are one of the largest producers in the world of linear motion components such as: linear guideways, ballscrews, linear motors and stages. We are currently seeking an onsite Mechatronics Technician to join our fast paced, diverse, and safety centric team. Summary: With general supervision and in coordination with the Engineering team, assembles and tests precision motion systems. Focuses on quality and efficiency to ensure that the orders are built to customer specifications and completed in a timely manner. Job Duties and Responsibilities: Reads work orders and follows the requirements and assembly instructions for precision single-axis stages and multi-axis systems according to customer specifications and schedule; Reads and interprets engineering drawings, schematics, wiring diagrams and operational instructions. Uses measuring instruments, granite surface tools and test indicators to ensure the product is within customer specifications; Connects Hiwin electronics (servo drives and controls) to motion stages. Runs test programs to cycle stages and make measurements to verify conformance to specifications; Creates, tests, and labels extension cables in the work cell soldering station, according to the job details and wiring schematics. Shortens and/or adds connectors to motor and encoder cables as needed; Completes appropriate forms, prepares data sheets, and test reports; Operates designated machines and special test equipment. Performs routine maintenance of designated test equipment and work cell area. Evaluates test performance and construction data with the Engineering team; Receives instructions from and reports data to Engineers and other manufacturing personnel; Organizes work cell area by maintaining efficient use of space and proper housekeeping. Coordinates with Industrial and Mechatronics Engineering teams to select appropriate layout and tools for efficient assembly and testing tasks. Aids in creation/updating of work instructions and time studies as needed; Understands and prioritizes occupational safety requirements, and ensures tools and equipment are used properly; Integrates continuous improvement concepts and techniques into all aspects of the job. Job Qualifications: Knowledge, Skills, and Abilities: High school diploma or equivalent required; Mechanical aptitude and ability to read drawings and schematics including wiring diagrams; Competency in using the metric system going down to micron level; Meticulous attention to detail; Ability to obtain Hiwin forklift certification and maintain good status; Ability to use power tools safety i.e. drills, screw guns, heat gun, and soldering iron; Flexibility and ability to apply problem-solving skills in a team environment; Ability to work independently and prioritize tasks in the context of large customer projects; Good manual dexterity and agility; Must be able to carry and/or lift up to 50 pounds. Experience: At least 3 years of experience in precision assembly, testing equipment, soldering, cable assembly, and basic electronic test equipment preferred. Previous internship or apprenticeship in related position preferred; Certifications in Automation, Robotics, and Mechatronics field a plus. Hiwin Production Team Member Benefits Medical and Dental PPO and HMO plans offered through BCBSIL Hiwin pays 100% of the premium for Employee level Medical and Dental Insurance HSA or FSA available based on insurance elections Dependent coverage premiums are discounted based on years of service Short-Term and Long-Term Disability 100% covered $50,000 of life insurance policy 100% covered Accident and Critical Illness Insurance offered Cross training offered for those that want to develop in their career Quarterly bonus paid out based on performance and attendance 2 weeks paid Vacation Time 6 days paid PTO (Paid Time Off) 9 days paid Holidays Retirement planning (401k and Roth 401k options) Service Awards Snacks and coffee provided throughout the day Education Reimbursements Performance Reviews twice a year Company family Picnic and year-end Holiday party

Duration: 10-Months Contract (Possible Extension) Nice to Have Skills 1. Experience with electrical test equipment & measurements (Digital Multimeters, Power Supplies, etc). 2. Experience with documentation in a quality (manufacturing or laboratory) environment 3. Soldering certification 4. Experience coding/scripting Anything else you would like to add: Initial project will support a PCB design update and will involve swapping components on a PCB, swapping PCBs, and lots of troubleshooting. Essential Duties and Responsibilities: Responsible for performing a wide variety of research and development laboratory tasks and experiments, focused on electrical testing and prototyping. Will develop and maintain record keeping for experiments performed. Required to make detailed observations of tests, analyze data, and interpret results. Will maintain medical device laboratory equipment and inventory level of laboratory supplies. Will document summaries of testing and may write test protocols and reports. May support troubleshooting and root cause analysis activities. May be assigned routine assembly and testing portions of projects (e.g. product performance and software script testing). May support the prototyping and rework of medical devices, including mechanical and electrical activities. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. List knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Perform work with minimum supervision and have the ability to prioritize tasks. Must have good interpersonal, communication (both written & verbal), ability to create detailed documentation, and problem solving skills. Basic computer skills such as word processing, data entry, and e-mail. Experience with testing in a laboratory or production environment. Education and/or Experience: Include the education and experience that is necessary to perform the job satisfactorily. High School diploma or equivalent, AA degree is strongly preferred. 1+ years experience in an electro-mechanical laboratory environment. Basic computer skills Preferred: B.S. in electrical engineering or equivalent. Experience with engineering tools and statistical software. Ability to understand technical schematics and statistical tools. Experience soldering. Experience with Oscilloscopes, DMMs, and other electrical laboratory equipment. About US Tech Solutions: US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To learn more about US Tech Solutions, please visit ************************ US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Name: Kanika Dureja Email: ******************************* Internal Id: 25-33278

Looking to work for a leading automation business offering unique solutions to multiple industries? Open to learning new things and developing high-performance products that are ever-improving? Do you want to be at the forefront of engineering in a business always looking for ways to improve its products & offering to customers? We're looking for a Senior Controls Engineer who enjoys working in a team to work on industrial automation projects from concept to manufacturing. What you'll do: Design control systems using AutoCAD, including power distribution, PLC configurations, panels, pneumatics, hydraulics, and instrumentation. Develop tailored software solutions for projects. Manage budgets and schedules in collaboration with Project Manager. Provide solutions during project construction. Mentor junior Controls Engineers. Create project schedules. Debug software and ensure production readiness. Assist in project installation. What you'll need: PLC expertise, including Allen Bradley models (CompactLogix, ControlLogix, SLC 500, etc.), Siemens 416. HMI proficiency, such as; Allen Bradley Panelview, Panelview Plus, Siemens TP, and OP Series. Knowledge of communication protocols (Ethernet I/P, ControlNet, Profibus, etc.). Familiarity with Variable Frequency Drives Robotics skills & understanding of Linear Actuators

Title: Electro Mechanical Technician Shift: 12-hour Day OR Night Shift (Days: 7:45AM-7:45PM | Nights: 7:45 PM-7:45 AM) On a 2-2-3 Schedule Hire Type: Direct Hire Pay: $28-34/hr based on experience Benefits: Insurance (Medical/ Dental/ Vision), Life Insurance, Short & Long Term Disability, and Life Insurance Job Duties: Supports day-to-day operations of machines, equipment, and facility areas. Performs preventive maintenance and provides technical assistance for reliability issues. Assists with production equipment upgrades, rebuilds, and repairs components/systems using various tools and equipment. Advanced Electro-Mechanical Technician will serve as backup. Ensure compliance with electrical codes, OSHA safety standards, and company safety guidelines. Provide mechanical and electrical support for routine and preventive maintenance. Assist the shift maintenance team with troubleshooting and problem-solving. Support continuous improvement in areas like PLC programming, variable speed drives, and mechanical/electrical systems. Troubleshoot and repair production machine equipment and systems. Contribute to preventive and predictive maintenance efforts for equipment reliability. Maintain maintenance laptop programs and files. Manage Cognex vision system maintenance. Make electrical connections for devices and transfer electronic files (PLC, motor drives, Fanuc robotics, etc.). Interpret and troubleshoot electrical, pneumatic, hydraulic, and mechanical schematics. Use electronic test equipment (Multimeter, Oscilloscope, etc.) for troubleshooting. Support sanitation, housekeeping standards, and the introduction of new technology. Display strong teamwork, communication, and positive hands-on approach. Follow safety protocols and contribute to continuous improvement initiatives. Report food/product safety issues immediately to a supervisor or manager. Qualifications: Five years of Industrial Maintenance experience preferred. Certificate in Industrial Maintenance or military equivalent. Broad experience with electrical, mechanical systems, PLCs, pneumatic systems, HVAC, compressors, extrusion, assembly equipment, and more AAS in Electronics or equivalent preferred. PLC programming experience is a plus Experience with a computerized maintenance management system (MP2) beneficial. Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

PRIMARY RESPONSIBILITIES: This position is primarily responsible for the electrical, mechanical, and environmental testing and evaluation of new and existing Electromechanical medical devices. Will be required to handle test stands, set-up, perform and monitor testing activities. PRINCIPAL ACCOUNTABILITIES: Testing products in the Reliability Test Lab to test requirements specified by Product and Reliability Engineering. Taking direction from the Reliability Test Manager, Lab Supervisor and Test Engineers on safe working procedures, use of equipment, recording of test data, and monitoring of results. Performing all tests as directed by the Reliability Test Manager, Lab Supervisor and Test Engineers. Providing accurate and timely documented results. Communicating test results to appropriate engineering personnel. Performing teardown destructive testing or test to failure activities as part of the product development process. Verifying and validating proposed and/or implemented changes 618238

The Controls Engineer in the After Sales Department within the Operations Department is a point of contact for service support between Interlake Mecalux and our customers with Automated Interlake Mecalux Solutions. This role ensures customer satisfaction during the complete life cycle of our automated installation by performing corrective maintenance and modifications of the solutions. Responsibilities: Serve as a customer contact to resolve product/service concerns for Interlake Mecalux Automation Solutions. Perform remote monitoring, troubleshooting, and removing faults, failures and disturbances in automation equipment and devices remotely and at the customers' sites. Modify the PLC program to manage the machines based on the standard Mecalux libraries. Modify the hardware and fieldbus parametrization using the different tools depending on the solution. Download devices parametrizations from data base. Modify the parametrization for nonstandard systems. Troubleshoot control programs for VFDs, operator panels, barcode scanners, control tablets, and PLC's. Validate the transfer from operations to aftersales following the internal checklist and protocols, paying special attention to ensure that safety devices are properly installed and functioning. Assist Project Managers in determining the human resources demand for an after sales project. Identify and delegate the tasks for electromechanics to assist in after sales services, ensuring they are completed properly and on time, reporting deviations to the After Sales Manager. Track and report issues and tickets (incidents, improvements, preventive maintenance). Keeping an accurate record of the timeline and solution applied. Minimum Requirements: Bachelor's degree in Engineering. Professional exposure to the field of Industrial Automation. Knowledge of PLC, HMI and SCADA programming preferred. C programming language knowledge preferred Ability to read mechanical drawings and electrical wiring diagrams Knowledge of Frequency Inverters parameterization and operation (preferable SEW and Lenze) preferred. Knowledge of the Fieldbus networks (Profibus, Profinet, etc.) preferred. Spanish fluency is ideal Personality: Candidates must be organized and methodical in their work, with the ability to learn quickly and adapt easily to change. Candidates must be able to persevere through difficult work challenges with the highest degree of dedication. Candidates must have strong interpersonal skills with the confidence to interact and communicate effectively with personnel from all levels of the organization. Ability to work under time pressure. Able and willing to travel at least 50%. We offer: Competitive compensation. The ability to become a part of an industry-leading dynamic team with a high focus on delivering results and continuous improvement. 401(k) plan through Fidelity, with a generous company match; 100% vested immediately upon contributing and no waiting period to start participating. Paid Holidays and Paid Time Off with the option to cash out unused PTO every year. Possibility for telework days, depending on position, with flexible make-up time for exempt employees. Blue Cross Blue Shield medical insurance plans, along with dental and vision benefits. Opportunities for career development and advancement; enhance your technical, specialized knowledge and gain new skills through promotions from within.

Immediate need for a talented Electrical Engineering Technician. This is a 12+months contract (+ possibility to extend) opportunity with long-term potential and is located in Round Lake, IL (Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID:25-62035 Pay Range: $20 - $24/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Responsible for performing a wide variety of research and development laboratory tasks and experiments, focused on electrical testing and prototyping. Will develop and maintain record keeping for experiments performed. Required to make detailed observations of tests, analyze data, and interpret results. Will maintain medical device laboratory equipment and inventory level of laboratory supplies. Will document summaries of testing and may write test protocols and reports. May support troubleshooting and root cause analysis activities. May be assigned routine assembly and testing portions of projects (e.g. product performance and software script testing). May support the prototyping and rework of medical devices, including mechanical and electrical activities. Key Requirements and Technology Experience: Key Skills:PCB, Electrical Test equipment & Measurements, Soldering, laboratory or Manufacturing Environment, Troubleshooting skills . High School diploma or equivalent experience, AA degree is strongly preferred. 1+ years' experience in an electro-mechanical laboratory environment. Basic computer skills. B.S. in electrical engineering or equivalent experience. Experience with engineering tools and statistical software. Ability to understand technical schematics and statistical tools. Experience soldering. Experience with Oscilloscopes, DMMs, and other electrical laboratory equipment. Hands-on experience in a laboratory or manufacturing environment working with electrical equipment Ability to convey detailed observations (verbal & written) Problem solving skills Experience soldering electrical components onto PCBs . Experience with electrical test equipment & measurements (Digital Multi-meters, Power Supplies, etc.) . Experience with documentation in a quality (manufacturing or laboratory) environment . Soldering certification . Experience coding/scripting . Our client is a leading Pharmaceutical Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

FUNCTIONAL PURPOSE: Independently performs the full range of diagnostic, preventive maintenance, alignment and calibration, and overhaul tasks, on both hardware and software on a variety of mail processing, customer service, and building equipment and systems, applying advanced technical knowledge to solve complex problems. DUTIES AND RESPONSIBILITIES: 1. Performs complex testing, diagnosis, maintenance, alignments and calibration, overhaul, and revision, of electronically operated or controlled equipment or systems; may be required to perform maintenance of associated electromechanical equipment and systems. 2. Observes the operation of systems and equipment, and applies various testing and diagnostic methods and procedures to locate and correct malfunctions and/or failures and ensures maximum system performance. 3. Performs equipment inspections to assess the quality of service or maintenance received, and to discover incipient malfunctions; initiates work orders requesting corrective actions for equipment not meeting maintenance or operating standards; estimates time and materials necessary to make corrections and conducts investigations of frequent or serious equipment failures to determine the cause of the breakdown and to recommend remedial maintenance action. 4. Recommends changes to servicing and preventive maintenance activities; assists in the revision of preventive maintenance and operator checklists, and their frequency to sustain the proper degree of maintenance. 5. Performs analyses of equipment failures; reviews operational reports, audits, and other information, to determine where operational enhancement can be made to prevent equipment or systems deterioration. 6. Participates in the installation, removal, modification, assembly, and/or disassembly of systems and equipment. 7. Participates in classroom, on-the-job, and correspondence training programs; attends courses at postal facilities, trade schools, and manufacturers sites; assists in developing and implementing training programs; provides on-the-job training to other lower level maintenance employees. 8. Provides technical support to other employees in the facility or in installations within the area served; performs in-process and final operational checks and tests work completed by other employees; may work without direct supervision. 9. May drive a vehicle or use other appropriate modes of transportation in the course of assigned duties. 10. Follows established safety practices and requirements while performing all duties; reads and adheres to instructions listed in applicable maintenance directives; maintains a library of maintenance directives. 11. Performs other duties as assigned. REQUIREMENTS: Ability to demonstrate mechanical comprehension to learn and apply mechanical principles, including a working knowledge of basic mechanical operations (such as levers and pulleys) and the application of physical laws (such as force and gravity). This includes knowledge in the following areas: (A) Power transmission--such as gears, sprockets and chains, belts and pulleys; (B) Power translation--such as cams and cam followers, linkages, springs; (C) Friction reduction'such as bushings, bearings; (D) Fasteners--such as screws, nuts and bolts, pins, rings, clips, couplings. Knowledge of basic electricity principles; this includes knowledge of Ohm's law, Kirchoff's law, AC-DC circuitry, relays, switches, and circuit breakers. Knowledge of the National Electrical Code may be required for employees in a skilled position. This also includes knowledge of techniques and procedures as used in electrical installations and maintenance (circuit protection, wiring, conduits, etc.). Knowledge of electronic principles; this includes knowledge of (A) basic logic gates, symbology, resistors, memory, encoders, decoders, etc.; (B) Hardware/components - such as solid state devices (diodes, transistors, etc.), coils, capacitors, etc.; (C) Digital circuit components - as in registers, adders, counters, memories, flip-flops, encoders, decoders, etc.; and D) AC and DC circuitry - as in circuit analysis, schematic interpretation, etc. Knowledge of and ability to follow safety and security procedures for performing maintenance work This includes knowledge of industrial hazards (e.g., mechanical, chemical, electrical, electronic) and procedures and techniques established to avoid injuries to self and others such as lock out devices, protective clothing, and waste disposal techniques. Knowledge of current computer technology to understand how technology may be applied to solve a problem or improve system design; this includes knowledge of hardware, software and networking technology/systems and integrated computer systems. This includes knowledge related to: (A) the Operation of computer terminals or other peripherals to enter, operate, and exit programs; to use the systems programs and (B) Retrieving and interpreting reports for diagnostic and information purposes. Ability to perform mathematical calculations such as addition, subtraction, multiplication, and division correctly; to solve practical problems by selecting from a variety of mathematical techniques such as formulas and percentages. Ability to remember material learned earlier refers to the ability to recall specific information and/or theoretical knowledge and apply it to mechanical, electrical, or electronic maintenance work such as inspection, troubleshooting, equipment repair and modification, preventive maintenance, and installation of electrical equipment. Ability to troubleshoot problems to analyze the root cause of a specific error and decide what action to take to prevent recurrence; to back track from a specific problem to identify the source of the error. Ability to think logically and critically; to understand the relevance of information; to identify relationships between information and data. Ability to think of possible causes for problems and find solutions; to choose the best course of action; to make a decision without delay when the opportunity arises or when all desired information is not available. Ability to learn and comprehend new or unfamiliar material; to use multiple approaches to grasp or learn the implication of new information; to quickly incorporate information and ideas. Ability to comprehend spatial relations as required to perform maintenance work; to form three-dimensional mental pictures of objects; to know what an object would look like when viewed from a different angle; to determine if something will fit in a specified area. This may include the ability to use technical drawings (e.g. diagrams, blueprints and schematics). Ability to read and comprehend job related written materials; this also includes the ability to locate, read, and comprehend text material such as handbooks, manuals, bulletins, directives, checklists, and route sheets. Ability to communicate work related information in writing to maintenance, operations and other personnel to complete forms or provide routine and technical information (e.g., in work logs, e-mails, memos and technical reports/documents). Ability to follow oral and written directions, instructions, rules, policies and/or procedures correctly and in order.Ability to develop and maintain effective working relationships; to work with teams; to help others; to accept suggestions; to treat others with dignity and respect. Ability to demonstrate organizational commitment to the public service goals and mission of the Postal Service. Ability to be conscientious to carry out job tasks; to be responsible and dependable; to take care in performing routine and novel tasks; to track details; to check that all work is accurate and complete; to record information accurately. Ability to work from heights refers to the ability to perform safely and efficiently the duties of the position above floor level such as from ladders, catwalks, walkways, scaffolds, vert-a-lifts, and platforms. Knowledge and ability to use various hand or portable power tools in performing mechanical, electrical, electronic or other maintenance work; this may include the use of shop power equipment. This ability includes the safe and efficient use and maintenance of such tools as screwdrivers, wrenches, hammers, pliers, chisels, punches, taps, dies, rules, gauges, and alignment tools; refers to the knowledge of, and proficiency with, various power tools; the ability also involves the safe and efficient use and maintenance of power tools such as drills, saws, sanders, and grinders; refers to the knowledge of, and proficiency with, shop machines such as bench grinders, drill presses, and table/band saws. Knowledge and ability to use test equipment, gauges or tools to take measurements and/or to take measurements with electrical or electronic test equipment (such as VOMs, oscilloscopes, amprobes) to perform maintenance work; this includes various types of maintenance equipment and may monitoring the operation of a system or machine or use of data networking test equipment. EXAMINATION REQUIREMENTS: Applicants must successfully complete Postal Service Test 955, for the Electronics Technician job group, which measures maintenance knowledge, skills and abilities. In addition, applicants must successfully complete a structured interview evaluation. ADDITIONAL PROVISIONS: 1. Applicants must be able to operate powered industrial equipment. 2. For positions requiring driving, applicants must have a valid state driver's license, and demonstrate and maintain a safe driving record.

At HelloFresh, we want to change the way people eat forever by offering our customers high-quality food and recipes for different meal occasions. Over the past 10 years, we've seen this mission spread around the world and beyond our wildest dreams. Now, we are a global food solutions group and the world's leading meal kit company, active in 18 countries across 3 continents. So, how did we do it? Our weekly boxes full of exciting recipes and fresh ingredients have blossomed into a community of customers looking for delicious, healthy, and sustainable options. The HelloFresh Group now includes our core brand, HelloFresh, as well as: Green Chef, EveryPlate, Chefs Plate, Factor_, and Youfoodz. Kitchen Technician Shift-Monday- Friday 3:30 start Factor_ a brand of HelloFresh is seeking a Kitchen Technician. As a Kitchen Technician, you will work with the maintenance team to maintain and repair commercial and industrial cooking and food processing equipment to support operations uptime and improve reliability of our systems. This role is the resident expert in mechanical, electrical and/or kitchen equipment systems. You will.. Lead and educate compliance with all safety, food safety, and security standards. Perform preventive maintenance and routine inspections on assigned ovens, brasiers, grills, formers, mixers, and ancillary equipment as needed. Perform troubleshooting of assigned out of service equipment and correct issues, act as an escalation point for lower level technicians, and escalate to leadership and/or vendors as needed for additional troubleshooting. Document all work in the computerized maintenance management system (CMMS) and ticketing systems as appropriate. Mentor all maintenance personnel in developing appropriate skill sets and knowledge of equipment specializing in mechanical, electrical, and hot side equipment. Lead root cause analysis of major downtime events. Act as a network resource for technical issues and lead network-wide root cause analysis. Develop maintenance personnel knowledge on intermediate to advanced troubleshooting and repair techniques for commercial/industrial cooking equipment. Audit maintenance personnel work and provide feedback to improve performance and quality. Audit vendor work to provide feedback to leadership on quality of work and SLA performance. Write and/or modify PMs to standardize across the network and increase effectiveness. Perform building project work as assigned. You have.. 4-6 years of experience with commercial/industrial cooking and processing equipment, including mechanical and electrical operations and/or small-system refrigeration repair and maintenance. Advanced understanding of machinery and equipment. Basic computer skills. Ability to read and understand drawings, schematics and diagrams. Experience with repairs and maintenance of different types of cooking/processing equipment to include combi ovens, gas and electric grills and cooking vessels, handheld and stand mixers, forming and packaging equipment, automated conveyance, metal detectors, and other types of commercial/industrial kitchen equipment. Ability to troubleshoot, diagnose, and repair low voltage controls, safety circuits, motors, heating elements, burners, blowers, heat exchangers, etc. Expertise with gas valve troubleshooting. Fire suppression safety training. Experience working with inputs, outputs, and PLC logic systems and ability to troubleshoot these systems. Ability to travel as necessary (up to 10%) for business purposes. Excellent follow through, judgment, and common sense. "Make it happen" attitude. Mechatronics associates degree or equivalent is preferred but not required. Must be able to read, write and speak English. Bilingual in Spanish a plus. You'll get… Competitive salary, 401k with company match that vests immediately upon participation, and company equity plan based on role Generous PTO, including sabbatical, and parental leave of up to 16 weeks Comprehensive health and wellness benefits with options at $0 monthly, effective first day of employment Up to 75% discount on subscriptions to HelloFresh meal plans (HelloFresh, Green Chef, Everyplate, and Factor_) Access to 7 different Employee Resource Groups (ERGs) including those for BIPOC, women, veterans, parents, and LGBTQ+ Inclusive, collaborative, and dynamic work environment within a fast-paced, mission-driven company that is disrupting the traditional food supply chain This job description is intended to provide a general overview of the responsibilities. However, the Company reserves the right to adjust, modify, or reassign work tasks and responsibilities as needed to meet changing business needs, operational requirements, or other factors. #factor Illinois Pay Range$39.25-$39.25 USDAbout HelloFresh We believe that sharing a meal brings people of all identities, backgrounds, and cultures together. We are committed to celebrating all dimensions of diversity in the workplace equally and ensuring that everyone feels a sense of inclusion and belonging. We also aim to extend this commitment to the partners we work with and the communities we serve. We are constantly listening, learning, and evolving to deliver on these principles. We are proud of our collaborative culture. Our diverse employee population enables us to connect with our customers and turn their feedback into meaningful action - from developing new recipes to constantly improving our process of getting dinner to our customers' homes. Our culture attracts top talent with shared values and forms the foundation for a great place to work! At HelloFresh, we embrace diversity and inclusion. We are an equal-opportunity employer and do not discriminate on the basis of an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. As part of the Company's commitment to equal employment opportunity, we provide reasonable accommodations, up to the point of undue hardship, to candidates at any stage, including to individuals with disabilities. We want to adapt our processes and create a safe space that welcomes everyone so please let us know how we can accommodate our process. In case you have any accessibility requirements you can share that with us in the application form. To learn more about what it's like working inside HelloFresh, follow us on Instagram and LinkedIn. HelloFresh is committed to the principles of equal employment opportunity and providing reasonable accommodations to candidates with disabilities. If you need an accommodation during the application process, please reach out to us at: Europe: EUaccommodations@hellofresh.com APAC: APACaccommodations@hellofresh.com United States: USCandidateAccommodations@hellofresh.com Canada: CAaccommodations@hellofresh.com

Title: Electronic Test Technician Schedule: Flexible 1st shift hours (any 8 hours between 6am and 6pm) Duration: 12 month contract Pay: Up to $40/hr depending on experience Reason Detail: Once all the Proof of concept (POC) hardware is in house we do not have enough technicians to test SUMMARY/SCOPE OF POSITION: Supports engineering activities such as design, test, check-out, modification, fabrication and assembly of prototype electromechanical systems, experimental design circuitry or specialized test equipment. Applications include analog, digital and power electronic systems. Independently works from schematics, diagrams, written and verbal descriptions, layouts, and defined plans to perform modifications, testing, checkout, and trouble-shooting functions. Performs test set-up, qualification and agency certification testing, and data capture for test reports with minimal supervision and guidance. Uses test, development, and diagnostic equipment, including, but not limited to, digital multi-meters, oscilloscopes, current and voltage probes, waveform generators, spectrum analyzers, and specialized test apparatus. JOB DUTIES Works independently on assignments requiring considerable judgment and initiative. Understands implications of work and makes recommendations for solutions Perform component, subsystem, and product testing, evaluating performance per specification Maintain and learn new technological skills so that they may be appropriately applied in product test or to development processes Utilize and interpret the following test and development instrumentation: Digital oscilloscopes, voltage and current probes, tachometers, power supplies, signal generators, spectrum analyzers, EMC analyzers, surge generators, and partial discharge testers Shall understand and practice laboratory procedures for the safe and efficient use of electronic instrumentation, electrical power, rotating electrical machinery, and general laboratory cleanliness Writes reports, test plans and other related or supporting levels of documentation Assist others in the accomplishment of development programs, from evaluating design concepts through experimentation and prototype development including engineering documentation Use ordinary hand and power tools to construct and fabricate prototype circuits, sub-systems and systems commonly found in a power electronics industry Learn and use SW tools to interface to and control the operation of a variable frequency drive (VFD) Troubleshoot, solder components and repair printed circuit boards Compose well written, legible, and accurate notes of experiments, including a summary on interpreting test results and recommendations Learn and use software tools such as SAP and Windchill Travel to off-site facilities in greater Milwaukee area for EMC, shock and vibration testing for product qualification and certification Skills: Top 3 skills MUST have: Physical abilities as detailed on job description, ability to learn new things, experience safely working w/ over 50V Must have qualifications to also include soldering experience and DMM/oscilloscope experience. Years of experience required: This could vary widely from 1-2 to 30+. Previous candidates with military experience have worked out very well in this role. Computer knowledge required to perform duties: Windows operating system, Outlook email, Teams, Ethernet connections to drives, SAP, Windchill DESIRED QUALIFICATIONS Solder experience down to 0402/0201 components Experience using DMMs Experience using oscilloscopes Experience working with high voltage (over 50V) Good organizational skills demonstrated through organizing or managing a lab or materials for a project Meet RA physical job requirements for laboratory work and equipment handling

The Controls Engineer is responsible to develop and execute innovative, cost-effective design solutions for our customers Controls Engineer must have aptitude, understanding and desire to automate high tech equipment and must work well in a challenging, fast paced environment for a high level systems integrator. High degree of personal integrity and performs well as part of a team. PRIMARY DUTIES AND RESPONSIBILITIES - PLC Control Engineer Efficient execution of projects to meet or improve upon budgets and schedules. Prioritizing workload effectively and responding to all teams in a timely fashion. Hands on PLC Controls system design, development, programming, and integration. Program HMI/GUI and PLC logic and integrate discrete/analog devices into equipment per project specifications. Simulate, test, and commission control systems based on System Description of Operations. Working knowledge of control communication platforms. Provide on-site technical support during startup and commissioning of new installations On-site support for existing installations and troubleshoot machine and control system issues. Keep abreast of current and emerging technologies. Follow corporate and industry best practices. Ability to collaborate with engineering, product management, and technical support teams. Able to work on multiple projects simultaneously in a fast-paced, energetic environment and manage competing priorities. Strong planning and organizational skills. EDUCATION Engineering Degree, Technical Degree, Military Tech Training or equivalent, with 5 or more years of industrial experience. EXPERIENCE 5+ yrs. Controls/PLC/HMI experience with a conveyor manufacturer and/or systems integrator QUALIFICATIONS Allen Bradley experience required. Proficiency preferred in one or more of the following: Allen-Bradley (RSLogix 5000), Siemens, Omron, and or other industry standard PLC platforms, and ladder logic. Experience in creating HMI programs using Factory Talk View, Optix, WonderWare, Siemens WINCC, and other industry standard Graphic User Interfaces. Working experience with networking the following platforms: Ethernet, TCP/IP, Serial, DeviceNet. Working experience with bar code scanners, cameras, and in-motion weighing equipment. Read and understand electrical schematics, physical and ladder diagrams. VFD programming and motor control experience preferred. Positive attitude with strong work ethic, integrity, and honesty. Excellent communication, editing and writing, as well as verbal, written, and presentation skills. Strong attention to detail and problem-solving skills. Strong interpersonal skills and ability to work with others to accomplish team goals. Team player with demonstrated effectiveness in accomplishing goals within the organization

Under general supervision performs electro-mechanical assembly, testing and/or troubleshooting of all department assemblies and components, including but not limited to Semco legend type SCR and Diode assemblies, RF type assemblies and components as well as high power microwave components. Technician is expected to work independently to achieve the desired results. Job Responsibilities: Essential Job Functions: Read and interpret schematics and blueprints, troubleshoot circuits, and help develop procedures for the assembly and test of the product. Assists engineers in the development and building of prototypes and/or test equipment used in the general production of department components. Set up and run experiments to compare operational parameters between competing units, and our own design products. Assists in other electronic technician areas such as calibration of equipment under ISO9001, programming PLC's, development of semi-automatic testing procedures, etc. Assembling and testing microwave generator products, Siemens medical products and RF type electro-mechanical assemblies. Non-essential Job Functions: Assist with assembly of other Electro-mechanical type products. Perform other functions outside of normal technical areas, when required. Qualification Requirements: Formal technical training in electronics, preferably microwave design and microwave measurement systems, as well as troubleshooting circuits. Employee must have 3-4 years prior electromechanical assembly experience. Be able to properly operate basic tools to help in the prototyping and pre-production runs for new and/or developing products. Must be able to read and interpret schematics and blueprints. Experience in an ISO9001 company is highly desirable. Must be able to lift 50lbs and sit or stand for long periods as needed. About Richardson Electronics - Power & Microwave Technologies: For over 75 years, Richardson Electronics has been your industry-leading global provider of engineered solutions, RF & microwave, and power products. The Power & Microwave Technologies group continues this legacy and complements it with new products from the world's most innovative technology partners. Richardson Electronics' Power & Microwave Technologies group focuses on what we do best: identify and design disruptive technologies, introduce new products on a global basis, develop solutions for our customers, and provide exceptional worldwide support. As a global company, we provide solutions and add value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair-all through our existing global infrastructure. More information is available at ****************** About Richardson Electronics:Richardson Electronics, Ltd. is a leading global manufacturer of engineered solutions, power grid and microwave tubes, and related consumables; power conversion and RF and microwave components including green energy solutions; high-value replacement parts, tubes, and service training for diagnostic imaging equipment; and customized display solutions. More than 60% of our products are manufactured in LaFox, Illinois, Marlborough, Massachusetts, or Donaueschingen, Germany, or by one of our manufacturing partners throughout the world. All our partners manufacture to our strict specifications and adhere to our supplier terms and conditions. We serve customers in the alternative energy, healthcare, aviation, broadcast, communications, industrial, marine, medical, military, scientific, and semiconductor markets. The Company's strategy is to provide specialized technical expertise and “engineered solutions” based on our core engineering and manufacturing capabilities. The Company provides solutions and adds value through design-in support, systems integration, prototype design and manufacturing, testing, logistics, and aftermarket technical service and repair through its global infrastructure. More information is available at ************* Diversity, Equity, Inclusion and Belonging Commitment Richardson Electronics is an international company with offices located throughout the world. We promote a culture where our employees feel welcome, respected and empowered to grow. We understand, respect and value the similarities as well as the differences of our employees as we do in our own families. We strive to be nurturing and open-minded and to create a genuine feeling of belonging. Our commitment to diversity, equity, inclusion and belonging creates a great place to work and an environment where our employees, our customers and the communities we serve can reach their goals and connect. Our effectiveness in maximizing and bringing together the talents of people of different backgrounds, experiences and perspectives is key to our continued global success. Equal Opportunity Employer/Veterans/Disabled *Must be authorized to work in the US. Required postings: Family Medical Leave Act (FMLA) ********************************************************** Employer Polygraph Protection Act (EPPA) ********************************************************* Equal Employment Opportunity (EEO) Know Your Rights *********************************************************************************** Invitation to Self-Identify **************************************************************************************

Shift Schedule: 12-hour weekend day shift (1st week: Thursday - Sunday, 2nd week: Friday - Sunday) Are you an experienced Critical Facilities Engineer with a strong technical background in data center infrastructure? Our client is looking for a Lead Critical Engineering Technician (LCET) to join their team team and ensure the smooth operation of mission-critical electrical and mechanical systems. This is a hands-on leadership role, responsible for overseeing maintenance, troubleshooting, and optimizing performance to maintain 100% uptime in a high-risk critical environment. Your impact to the business: Maintain and monitor critical electrical, mechanical, and HVAC systems, including UPS, generators, switchgear, chillers, and fire suppression systems. Lead maintenance tasks and oversee junior technicians and third-party vendors to ensure strict compliance with SOPs and safety standards. Conduct preventive and corrective maintenance to optimize reliability and efficiency. Write and execute Methods of Procedure (MOPs), Emergency Operating Procedures (EOPs), and Standard Operating Procedures (SOPs). Analyze Building Management System (BMS), Data Center Infrastructure Management (DCIM), and Electrical Power Monitoring System (EPMS) data for performance insights. Assist with root cause and failure analysis (RCCA) for continuous improvement. Respond to emergency situations and ensure rapid resolution of issues. The Necessities: 7+ years of experience in critical facility operations, maintenance, or engineering. Strong knowledge of UPS systems, HVAC operations, electrical infrastructure, and fire/life safety systems. Ability to read blueprints, schematics, and troubleshoot complex systems. Hands-on experience with BMS, DCIM, EPMS, and maintenance management systems. Excellent organizational and leadership skills, with the ability to mentor junior technicians. Strong understanding of OSHA, NEC, and other safety requirements. Ability to work 12-hour shifts, weekends, and respond to emergency situations as needed. Comfortable working in a physically demanding environment, including lifting 50lbs, working at heights, and in noisy conditions. What's in it for you? Work for an industry leader in data center operations and sustainability. Opportunity to lead and develop a highly skilled critical engineering team. Competitive compensation, annual bonus, 401(k), health benefits, and paid time off. If you're a technical expert in mission-critical environments looking for an exciting new challenge, apply today! If this is you, call me today so you don't miss out, the deets are below: *************** DM/BOOK A MEETING

Follow standard work defined by Fluke and cGMP defined by FDA to work on calibration processes and perform high quality calibration, troubleshoot and repair services on customer products. Participate in 5S regularly, do Kaizen and other continuous improvement processes implemented by the company. Knowledge of computer systems architecture, computer fundamentals desirable, Excel is desirable. Good organizational skills, knowledge of data input, process output and monitoring for everyday use is desirable. Interacts with customer service, technical support team, engineers and sometimes customers for items requiring repair or limited calibration. Prepare and maintain appropriate documentation and perform duties using regular test equipment in accordance with prescribed procedures, practices, and specifications. Completes all documentation supporting customer documentation requirements, reporting, ISO and other quality systems. Perform moderate to complex duties on a wide variety of production line instruments that have failed in previous testing or in operational use. May input to writing or modifying of test procedures and construct new test fixtures from drawings and specifications. May collect, analyze and report data on test processes as information source on related procedures and practices. Provide training or assistance to less experienced personnel. Under limited supervision, receive no instructions on routine work assignments and general instructions on new assignments. Sound knowledge of related test practices, processes and procedures, ability to operate all types of electronic and pressure test equipment. Creates calibration data sheets accurately and efficiently with minimal supervision based upon instrument specifications and approved calibration procedures. Rate Range: $20/hour to $25/hour; The rate may be negotiable based on experience, education, geographic location, and other factors. Equal Opportunity Employer/Veterans/Disabled Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client. To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit ****************************************** The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: · The California Fair Chance Act · Los Angeles City Fair Chance Ordinance · Los Angeles County Fair Chance Ordinance for Employers · San Francisco Fair Chance Ordinance

AMS Industries, Inc. is a MEP+™ contracting firm serving the commercial, industrial, refrigeration and nuclear industries (PMT). With over 60 years of existence, AMS has grown from a small refrigeration contractor with a few employees to a multi-discipline and multi-market MEP contractor with more than 500 employees. We strive to meet our commitments to clients, develop our people and improve our communities. We are seeking a skilled and detail-oriented Reality Capture Technician to join our team. Reporting to the Director of Engineering and Design, this position will perform laser scanning, 360 photogrammetry, and data processing operations. The ideal candidate will have experience in Virtual Design and Construction (VDC) and reality capture technologies, with a passion for innovation in the MEP+™ industry. Responsibilities: Conduct laser scanning and 360 photogrammetry at project sites to capture accurate as-built data. Process and manage collected data to create 3D models, point clouds, and other deliverables using specialized software. Collaborate with project teams to integrate reality capture data into design and construction workflows. Perform quality assurance to ensure accuracy and reliability of captured and processed data. Plan and execute site visits while adhering to safety protocols, including physical activity such as walking, climbing, or lifting equipment. Maintain and troubleshoot reality capture equipment, including laser scanners and cameras. Support the development of innovative workflows for leveraging reality capture in MEP+™ projects. Assist in the management and administration of Robotic Total Stations. Support the Design Group with design and fabrication assistance. Qualifications: Bachelor's degree in Construction Management, Architecture, Engineering, or related field experience. Familiarity with reality capture or a related field. Experience in reality capture techniques, including laser scanning and 360 photogrammetry, is strongly preferred. Proficiency in processing software such as Autodesk ReCap, Faro Scene or similar tools. Knowledge of VDC workflows and MEP+™ industry processes is a plus. Strong attention to detail and commitment to producing high-quality deliverables. Physical capability to perform job site activities and operate equipment. Excellent communication and organizational skills. Ability to work independently and as part of a collaborative team. Additional Information: This position requires travel to job sites as needed. Flexible working hours may be necessary to accommodate project schedules

To support our extraordinary teams who build great products and contribute to our growth, we're looking to add an Engineering Controls Technician located in Buffalo Grove, IL. Reporting to the Systems Engineering Manager, the Engineering Controls Technician leads troubleshooting and repair electrical, controls and communication issues on complex production lines which include PLC, HMI, motion control, VFDs, servo motors/drives, industrial networks and vision inspection systems. Shift: M-F 2pm-10:30pm with a 5% shift differential! What a typical day looks like: Support Automation Technicians in troubleshooting mechanical, pneumatic and hydraulic systems and components to return equipment to production. Set up and troubleshooting of motion control systems, Servo motors/drives and VFDs. Troubleshoot, maintain, and update in-line vision systems such as Cognex. Plan, implement PLC and HMI software upgrades and perform functional verifications. Read and interpret technical manuals, electrical schematics, various programs and mechanical diagrams including complex automated system drawings. Write test procedures to demonstrate effectiveness of software/hardware upgrades. Clearly and concisely document work performed in Medical Device environment. Other duties & responsibilities: Maintain software, documentation and equipment to the latest revision or operational specifications. Identify critical devices on new equipment and assure we have all manuals, cables, software, firmware and knowledge necessary to troubleshoot, repair or replace those devices. Collaborate with the automation team in the qualification process of automated systems. Assist engineers in developing and designing hardware and software required for automation solutions per specifications. Train other technicians and operators on processes and equipment. Proper use of power tools and measuring equipment Strong awareness of safety/electrical safety. The experience we're looking to add to our team: Requires a minimum of 6 years of experience troubleshooting PLCs', HMI's, motion control, VFDs, Servo motors/drives, industrial networks and vision inspection systems. Associates degree, Military technical training or vocational training in Industrial Controls Technology. Medical device experience or other regulated industry is preferred. Software experience with: RSLOGIX, Logics Designer, Factory Talk, Ignition, Cognex, Insight, Siemens S7. What you'll receive for the great work you provide: Full range of medical benefits, dental, vision Life Insurance Matching 401K PTO Tuition Reimbursement Employee discounts at local retailer