Computer Numerical Controller Machinist Jobs in Millbury, MA

Masis Professional Group has an immediate opening for a CNC Turning Machinist in Stoughton, MA. The Machinist position sets up and operates machines (CNC or manual turning horizontal and vertical turret lathes); performs progressive machining operations for equipment with extremely close tolerances; fits and assembles where necessary; interprets and reads blueprints in the performance of duties; and uses a combination of jigs, fixtures, and assemblies to perform machining operations. Essential Functions Perform machine shop turning operations. Regularly perform turning, drilling, tapping, and de-burring tasks. Ability to interpret and navigate through CNC programs (if applicable). Set up machinery to successfully conduct the run as specified, including the use of part indicators to establish origin. Ability to multitask or operate additional machines when required. Check CNC machinery is in good working order before operating. Acknowledge that all machine guards and safety switches are intact and operable. Perform assigned direct labor following blueprints, established procedures and using inspection tools and filling out inspection reports. Examine and inspect the first article produced to ensure quality. Monitor the run throughout the cycle, checking that specifications are met. Maintain all tooling and achieve proper expected tool life. Abide by all safety standards at all times. Report any safety or maintenance concerns to management immediately. Keep all work areas clean and organized. Strive to meet quotas without compromising quality. Hold self to a high standard of quality, taking pride in your work. Attend all safety and production trainings. Be available for overtime during high volume seasons. Recommend procedures for cost reduction and continuous improvement. Assume additional related responsibilities as assigned. Required Education and Experience High School/Technical School graduate or equivalent. 5+ years of related experience. Short run/prototype experience. Able to read blueprints and inspect parts. Experience working with large parts. Please submit your resume to be considered for this position.

CNC Machinist Operations Lead Employment Type: Full-Time We seek a CNC Machinist Operations Lead to oversee and drive manufacturing efficiency, quality, and continuous improvement within the Flowforming department. This role requires a strong leadership presence focusing on lean manufacturing principles, process optimization, and safety compliance. The ideal candidate will lead day-to-day machining operations, train and develop employees, and implement continuous improvement initiatives to enhance productivity and on-time delivery. Key Responsibilities: Operations & Production Leadership Oversee daily CNC machining operations, ensuring safe, efficient, and high-quality production. Lead, train, and motivate production team members to maximize productivity and performance. Manage employee schedules and workforce allocation to optimize workflow efficiency. Ensure all production goals, including safety, quality, cycle time, and on-time delivery (OTD), are consistently met. Collaborate with cross-functional teams to maintain seamless workflows and improve manufacturing outcomes. Process Improvement & Lean Manufacturing Identify process inefficiencies and implement continuous improvement initiatives to enhance production flow. Lead Kaizen events and lean manufacturing projects to optimize machine utilization and reduce waste. Develop and maintain work instructions and standard operating procedures (SOPs) for Flowforming processes. Implement root cause analysis and corrective action plans to resolve quality issues. Employee Development & Performance Management Conduct employee training and development programs, ensuring team members are skilled in CNC lathe operations and metal forming techniques. Evaluate employee performance, implement performance improvement plans, and take disciplinary actions when necessary. Foster a positive, team-oriented work culture, emphasizing accountability and professional growth. Safety & Compliance Promote and enforce a strong safety culture, ensuring compliance with all safety protocols and regulations. Identify and address workplace hazards to maintain a safe and ergonomic work environment. Qualifications & Experience Associate or Bachelor's degree in Mechanical, Manufacturing, or Industrial Engineering (or equivalent experience). 5+ years of manufacturing experience, preferably in a machine shop or metal forming environment. Expertise in CNC lathe operations, metallurgy, and Flowforming techniques. Strong understanding of Geometric Dimensioning & Tolerancing (GD&T). Proven ability to analyze problems, implement process improvements, and drive operational efficiency. Effective leadership, communication, and training skills. Ability to thrive in a fast-paced, dynamic manufacturing environment. Why Join Us? This is an exciting opportunity for a seasoned CNC machining professional to lead a high-performance team, implement process improvements, and drive operational excellence in a cutting-edge manufacturing environment. We encourage you to apply if you are passionate about precision machining, lean manufacturing, and team leadership!

We are seeking a highly skilled CNC Machine Operator to take on a lead role in a precision manufacturing environment. This is a hands-on position for a top-level machinist who can independently set up, program, quote, and design for complex machining projects. Key Responsibilities: Set up, operate, and program CNC machine tools, including 5-axis machining centers and turnkey systems. Debug, troubleshoot, and optimize CNC programs to ensure peak performance. Work with B-axis and multi-tasking lathes; experience with Nakamura machines is a plus. Read and interpret blueprints, GD&T, and CAD/CAM models to produce precision parts. Design and manufacture tooling, fixturing, and workholding solutions for efficient machining. Work with exotic metals, superalloys, titanium, stainless steel, and aluminum for medical device and aerospace components. Lead continuous improvement initiatives, including cycle time reduction, process optimization, and lean manufacturing. Provide quoting, cost estimation, and technical consulting to support production planning. Qualifications & Experience: 5+ years of CNC machining experience, with a strong background in precision manufacturing. Expertise in multi-axis milling, turning, and Swiss-style machining. Strong mechanical aptitude-ideal candidates have a background in hands-on mechanical work, such as automotive or motorcycle repair. Ability to work with G-code, M-code, Mastercam, Fusion 360, or other CAM software. Familiarity with workholding strategies, cutting tool selection, feeds & speeds optimization. Experience in tight tolerance machining (+/- .0002”), high-precision production, and quality control (CMM, metrology tools). Background in medical devices, aerospace, or high-performance components preferred. Compensation: $50-$60 per hour + Overtime This is an opportunity for a lead machinist to take charge of high-precision machining projects in a cutting-edge environment. If you are a problem-solver, hands-on leader, and expert in CNC machining, we encourage you to apply.

A Machine Technician III produces various metal products and is responsible for programming, setting up and running manual machining equipment and monitoring CNC machining centers. This role also includes performing and recording accurate quality checks, formulating machine offsets and sustaining run efficiencies in a safe manner. Essential Job Duties and Responsibilities Ability to program, set up, and run all CNC machines while making necessary offsets with little to no supervision. Monitor CNC milling and turning machine to specifications on inspection sheets/prints, producing the highest quality components to fall within established time standards. Possess full knowledge of all standard measuring equipment including the proper use of micrometers, calipers, comparators and various plug/thread gauges as well as blueprint reading. Perform full inspection, follow and complete inspection sheets to maintain tolerances according to specifications on prints. Perform and properly record quality checks. Possess full knowledge of tooling requirements and tool repair. Proven ability to trouble-shoot machine, tooling and program issues. Organize tasks to accomplish them in a timely manner. Understand and employ basic workmanship techniques and methods to maintain the highest quality level. Employee must always work in a safe manner while running equipment and moving or cutting product. Take and follow directions from supervisor. Work with others in a team setting by sharing responsibilities, such as running multiple CNC machines and manual equipment simultaneously. Effectively communicate with supervisor and co-workers Work in a safe manner at all times while adhering to company policies and procedures. Perform all other duties as assigned. Education and Experience Requirements High School Diploma or GED 8-10 years of CNC work ideal 4 or more years experience with operating production/machining equipment Ability to read, write, speak, and comprehend the English language. Basic computer navigation skills. Preferred Skills and Abilities Completed trade school or an apprenticeship in machining CNC lathe & milling experience Welding experience Ability to make & repair tools Working Conditions and Physical Demands Manufacturing environment. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; use hands to safely handle, feel or reach material and equipment. The employee is frequently required to walk, stoop, kneel, crouch, or climb. The employee is required to lift and/or move up to 75 pounds. Specific vision abilities required by this job include dept perception. [ The employee is frequently exposed to moving mechanical parts and occasionally exposed to fumes or airborne particles; risk of electrical shock and vibration. The noise level in the work environment is moderate to loud. Travel Required None

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: NoneTRAVEL: NoDescriptionAt Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work - and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Put your skills to the test by pushing the boundaries of what's possible. From global defense to sustainment and modernization to mission readiness, your experience and ability will make it a reality. Our programs are built on equal parts of curiosity and collaboration. Our combined effort means our customers can connect and defend millions of people around the world. With Northrop Grumman, you'll have the opportunity to be an essential part of projects that will define your career, now and in the future. Are you ready to put your experience to work at Northrop Grumman? If so, our Aeronautics Systems sector is currently seeking a Machinist 3 to join our team in Hopkinton, MA. You'll be responsible for generating CNC programs using Mastercam. Set up and operate Haas VF using step files & solid models. Overall machine shop knowledge including the use milling and lathe machines. Ability to machine complex high power microwave parts to tight tolerance (+/-.001) in a secured environment. Close interaction with engineering and manufacturing is required. Basic Qualifications: High School diploma or equivalent and 4 years additional education and/or related experience. Ability to generate Mastercam programs, set up and operate Hass VF2 Must be able to work from drawings/solid models. 4 years' experience working in a machine shop US Citizenship Must be able to lift & carry 50 pounds and stand for 4 hours at a time Preferred Qualifications: Silver torch braze copper filter assemblies. Ability to operate ProtoTRAK Bed/Knee Mill Strong written and verbal communication skills Salary Range: $59,300.00 - $98,900.00The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions.Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business.The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates.Northrop Grumman is committed to hiring and retaining a diverse workforce. We are proud to be an Equal Opportunity/Affirmative Action Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO/AA and Pay Transparency statement, please visit *********************************** U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Under minimal direction, the CNC Class A Machinist will program, set-up, and operate multiple Mazak CNC vertical milling machines using GD&T blueprints, 3D solid models, and/or written and graphical information supplied from a CAD/CAM system. Setup, monitor and maintain tooling during job runs. Load, inspect, and run tooling and programs to a high complexity (+/- .0005”). Perform in-process inspection and document results. Follow systems processes for job tracking and recording. Expected to support the daily activities of the Group Leader in delivering daily results. You will be responsible for: • Ensuring the highest quality products are produced on time and at the lowest attainable cost by utilizing standardized tools, creation of standards and building capability. • Working from CAD/CAM files, engineering drawings, sketches and or verbal instructions to perform highly diversified CNC operations to specifications. • Creating and editing semi-complex programs using CAD/CAM systems and machine controllers. • Assisting in training workforce in proper setup and use of equipment/systems. • Recognizing and reporting any inadequacies in prints, materials and route sheets in order to be corrected. • Maintaining I-Quality standards related to work procedures and tool/machine maintenance. Assets for this Position: • 5+ years of CNC machinist background preferred. • Knowledge of machine shop practices, elementary mechanics, machining methods, cutting qualities of materials, proper speeds and feeds. • Experience with machining steels of various grades and hardness. • Ability to work to +/-.0005. • Ability to read, understand, and program in G-Code format. Mazak-control background preferred. • Ability to use a computer, to work from complicated drawings and/or verbal communication in the assembly of components. • Basic knowledge of MS Office. In order to perform the work described above in our manufacturing atmosphere, plant technicians use basic hand and power tools; lift 50 pounds by bending and stooping; climb, stand, and move around on stairs, ladders and platforms; twist, turn and bend; enter confined spaces; and stand on concrete floors for an extended period of time. Further, technicians have and are able to display skills in manufacturing processes, including operating, maintaining and cleaning automated equipment; maintaining accurate records and data; strong technical, interpersonal and problem-solving skills; and knowledge of computers. Additionally, the safety of Technicians is of great importance to Procter & Gamble. Technicians will be required to wear appropriate safety equipment, such as safety shoes, ear protection, and eye protection. Relocation packages will be considered for the proper candidate. Job Qualifications All applicants must: • Be 18 years of age or older • Have a high school diploma, GED or equivalent education • Be willing to wear safety shoes, hearing protection, and eye protection. Starting Pay / Salary Range: $30-$55 per hour. Compensation for roles at P&G varies depending on a wide array of non-discriminatory factors including but not limited to the specific office location, role, degree/credentials, relevant skill set, and level of relevant experience. At P&G compensation decisions are dependent on the facts and circumstances of each case. Total rewards at P&G include salary + bonus (if applicable) + benefits. Your recruiter may be able to share more about our total rewards offerings and the specific salary range for the relevant location(s) during the hiring process. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, protected veteran status, disability status, age, sexual orientation, gender identity and expression, marital status, citizenship, HIV/AIDS status or any other legally protected factor. No immigration sponsorship is available for this position. Procter & Gamble does not sponsor candidates for permanent residency except in some areas that in Procter & Gamble's sole discretion require highly specialized backgrounds. Procter & Gamble participates in e-verify as required by law. Qualified individuals will not be disadvantaged based on being unemployed Job Schedule Full time Job Number R000108012 Job Segmentation Plant Technicians (Job Segmentation) Starting Pay / Salary Range $30.00 - $55.00 / hour

CNC Machinist 2nd Shift Walpole, MA As the CNC Machinist for Rolls-Royce, you will have the opportunity to use a variety of precision measuring instruments, inspect in process or finished parts and feature characteristics as well as manufacturing methods to blueprint specifications. Dream Big and Make an Impact Rolls-Royce has entered into an agreement to divest a portion of our business to Fairbanks Morse Defense. As part of this agreement, the role you are applying for will transition to Fairbanks Morse Defense after the closing of the transaction, expected mid-year 2025. In this role, you have a chance for you to develop a career within a global business and to help us improve our processes. At Rolls-Royce, we pioneer cutting-edge technologies that deliver the cleanest, safest and most competitive solutions to our planet's vital power needs. We embrace the power of data and technology and aim to be Digital First in everything we do. To ensure we continue to be pioneers of our industry, Rolls-Royce has a team of over 16,500 engineers around the globe. They include everyone from world experts in their field to those who manage hundreds of people and millions of dollars worth of investments. We recruit engineers at all levels and in a range of disciplines. And while we encourage specialisation, we also offer freedom to cross-specialise and develop skills across a number of different areas. Rolls-Royce is a Military Friendly Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other protected characteristic. You can learn more here. Key Accountabilities: * Setting up fixture components for jobs that require CNC Machining * Understanding and have functional use of CNC code and CNC programming * Setting machine origins in accordance with the set-up instructions * Working to machine dimensions and maintain close tolerances and correlated dimensions with a high demand for squareness, concentricity, finish and parallelism * Setting and loading all tools in conjunction with set-up instructions to complete assigned jobs * Ability to lift various items weighing up to approximately 40 pounds Basic Requirements: * High School Diploma or equivalent with 2+ years experience in machining operations or a Precision Machining Certificate * Knowledge of machining methods, cutting qualities of metals and tools * Ability to read and understand blueprints * In order to be considered for this opportunity, you must be eligible to obtain and maintain security clearance, which requires USA Citizenship Preferred Requirements: * Ability to operate various cranes, material handling equipment and various types of machining equipment etc. Pioneer an ocean of power. Join us and you'll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation. We are an equal opportunities employer. We're committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we'll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential. You can learn more about our global Diversity and Inclusion strategy here. Closing Date: December 12th 2024 Job Category Factory Staff Job Posting Date 04 Dec 2024; 00:12 Pay Range $30.09 - $45.14-Hourly Location: Walpole, MA Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, employment type, and the applicability of collective bargaining agreements.

Company Information Consolidated Machine & Tool (CMT) and its 7 locations specialize in precision machining, fabrication, and assembly of highly engineered components. With over 175 years of combined experience, 300,000 sq. ft. of floor space, 250 CNC machines and 350 talented employees across the United States and Canada, we leverage our combined expertise and state of the art CNC machining capabilities to deliver quality machined parts to customers all across the globe. Our primary commitment is to provide our customers with a quality product, on-time delivery, and competitive pricing. Position Summary Waiteco Machine (WCO), a CMT company, is seeking a CNC Setup Machinist for our Devens, MA location. The CNC Setup Machinist is responsible for operating computer numerical control (CNC) Vertical Mills to perform machine functions on very close tolerance machined parts. If you are looking for an organization and career that will match your strong work ethic and passion for success, Waiteco Machine is a great place to start! *This position works a schedule of Monday thru Friday from 6:30am-3:00pm. The pay range for this position is between $30.00-$33.00 per hour depending on experience* Essential Duties and Responsibilities Prepares programs and pre-sets all tools needed for matching operations. Preps, positions, and secures workpiece in holding device, machine table, chuck, centers, or fixtures. Sets up fixture, installs tooling, installs programs, enters offsets, and proves out machine. Inspects first run piece and makes offsets as required, spot checks succeeding pieces for conformance to specifications (including documentation of results). Recommends and helps implement any improvements that could be made to the existing processes. Performs other associated duties as needed to continue the productive operation of the company. Experience, Qualifications, and Skills High school diploma or GED. 3+ years of 3 and 4 axis machine experience is required. 1+ years of CAM software (MasterCam) experience is preferred. Ability to read and understand G code Programming. Benefits and Perks Our comprehensive benefits package includes, but is not limited to, a competitive pay rate, accrued Paid Time Off, paid holidays, 401(k) with company match, health, dental, and vision insurance as well as Short-Term Disability, Long-Term Disability, and life/AD&D insurance. Employee Only Dental coverage, Long-Term Disability, and life/AD&D insurance is employer paid. Consolidated Machine & Tool and all of its locations are a drug-free workplace / Equal Opportunity Employer and Prohibit Discrimination and Harassment of Any Kind: We are committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions are based on business needs, job requirements, and individual experience and qualifications, without regard to a person's sexual orientation, gender identity, gender expression, religion, disability, race, creed, color, sex, age, national origin or ancestry, or any other status protected by the laws or regulations in the locations where we operate.

Nova Biomedical is hiring a CNC Machinist/Programmer on-site in our Waltham, MA facility (7:00 AM - 3:30 PM). The CNC Machinist/Programmer is responsible for the operation, set up, and programming of all manual and automated equipment in the shop. This individual must be proficient in Mastercam CAD system. Other responsibilities include: Setting up all shop equipment including the Manual Milling, Lathe, and Trak Lathe machines. Programming all manual and automated equipment and machines. Setting up and maintaining operation of CNC Millers and Lathes, including tool offsets and editing of CNC programs. Being responsible for part quality, dimensional inspections and meeting time standards. Maintaining equipment upkeep and a clean Model Shop overall. Qualifications/Skills and Competencies: Read and write English and follow written/verbal instructions. Perform Machine Shop math. Working knowledge of Good Manufacturing Practices (GMP). Ability to work independently. Physical Requirements: Ability to lift up to 50 lbs. Ability to work while standing or bent for long periods. Ability to work in a loud Machine Shop environment with CNC Mill and Lathe machines. Ability to wear PPE eyewear. Proficient with all shop measuring tools. Education/Experience: High School or Technical School graduate. 5+ years of Machine Shop experience and the skill level of a Machinist A with programming knowledge. At Nova Biomedical, we practice our core values of mutual respect, honesty, and integrity throughout the company. With a strong sense of family in the workplace, we are proud that one third of all our employees have been with us for over 10 years. Highlights of benefits offered to Nova Biomedical employees include Blue Cross Blue Shield medical plan, tuition reimbursement, matching 401K, company subsidized cafeteria and an innovative scholarship program for children of employees.

We are seeking a dedicated and experienced 2nd Shift CNC Machinist. The ideal candidate will be responsible for the milling CNC operations, ensuring the highest quality standards, and maintaining a safe and efficient work environment. ESSENTIAL DUTIES AND RESPONSIBILITIES: · Coordinate the activities of the 2nd shift milling CNC team. · Ensure that all milling CNC machines are set up, operated, and maintained according to company standards. · Monitor production schedules and ensure that all deadlines are met. · Verify conformance of workpieces to specifications using measuring instruments such as micrometers, calipers, and go-no-go gauges. · Troubleshoot and resolve any issues that arise during the milling process. · Train and mentor team members on proper machine operation and safety procedures. · Maintain accurate records of production, maintenance, and quality control. · Implement and enforce safety protocols to ensure a safe working environment. · Collaborate with other departments to optimize production processes and improve efficiency. REQUIRED SKILLS / ATTRIBUTES: · In-depth knowledge of CNC milling machines and operations. · Strong leadership and team management skills. · Excellent problem-solving abilities and attention to detail. · Ability to read and interpret technical drawings, blueprints, and specifications. · Proficiency in using measuring instruments and tools. · Strong communication and interpersonal skills. · Ability to work night shifts and adapt to a fast-paced environment. EDUCATION AND EXPERIENCE: · High school diploma or equivalent; technical degree or certification in CNC machining is preferred. · Minimum of 5 years of experience in CNC machining · Experience in programming and setting up CNC mills is preferred. · Demonstrated ability to troubleshoot and solve complex problems related to CNC milling operations. PHYSICAL JOB REQUIREMENTS Frequently required to stand, walk, and reach during the duration of shift, 8-10 hours. Occasionally required to sit, stoop, kneel, crouch, or bend. Frequently required to perform repetitive tasks and lift up to 50 pounds. Understands and observes all necessary safety procedures, including the use of personal protective equipment (PPE) as designated in the specific work area assigned. This position requires working night shifts. The work environment includes exposure to noise, dust, and machinery. Benefits Benefits: PTO days and 9 paid national holidays per year Medical, Dental, & Vision Plans Short and Long Term Disability Plans 401(k) Retirement Plan with strong employer match Company paid life insurance & AD&D 100% tuition reimbursement for job relation classes PPE reimbursement Compensation: Pay: $30 - $35 Hourly * We are an Equal Employment Opportunity ("EEO") Employer. Applicant can learn more about Prince's status as an equal opportunity employer by viewing the federal "EEO is the Law" poster ( ****************************** )

Skill Source is a leading placement service specializing in manufacturing operations both on the production floor and front office. We work hard finding the right complimentary fit for both client and qualified candidates. We facilitate this by asking not just the right questions technically but the right questions to fit you personally. We have a substantial client base to work with so there is a very good chance we can find you the next step in a more satisfying career. Submit your hard earned resume today and let us see what we can do for you! Job Description CNC Surface Grinder Setup Machinist-Programmer needed on 1st or 2nd shift at our aerospace precision machining client near Burlington, MA. Direct-hire position, not a temp, with competitive compensation and benefits. Qualifications Requires HS diploma or GED plus 3 years minimum experience with Fanuc-controlled CNC surface grinders (especially Okamoto). Program, setup, operate, troubleshoot, minor editing (Okamoto conversational) needed. Prior experience training other machinists a major. plus. NOTE: Applicants not credibly possessing these qualifications will not be accepted for evaluation. Additional Information These are permanent positions NOT contract! Excellent pay (Pay commensurate with experience) and benefits packages! Some of our clients pay FULL medical! Please feel free to review our other opportunities at ***************************

Conval is the industry leader in Severe Service Valves. We are dedicated to providing the highest quality products, all of which feature great durability and longevity. Some of the industries that we service are the power generation industry, refineries, pulp and power plants, water treatment, oil and gas production, fertilizer, and chemical. As we continue to grow, we are seeking skilled and capable individuals who want to join an industry leader who has been in business for over fifty years. We are currently recruiting for a 2nd Shift CNC Operator. Come grow with us!! CNC Operator Job Duties Include: Run and set-up machines Operate numerical, controlled lathes or machining centers to perform simple repetitive rough turning, boring, facing, and threading Read and interpret blue prints Selects tools and holders, installs appropriate fixtures or other holding devices and aligns and sets stops to complete set-up of machines Sets feeds and speeds in accordance with machinability of material and finish requirements as specified or directed Loads and unloads machine manually and checks product with appropriate measuring tools and gauges Observes machine to detect faulty operation Cleans, oils, and lubricates machine and makes minor adjustments and repairs as required Requirements CNC Operator Qualifications Include: High school diploma or GED One to three years related experience Ability to read blueprints Gauging knowledge Mazak and Mazatrol preferred Basic math skills Ability to lift and/or move up to 50 pounds Available to work Monday - Thursday, 3:30 p.m. - 2:00 a.m. Benefits Conval offers include, but are not limited to: Medical and Dental Insurance Paid vacation and personal days Paid holidays Life Insurance 401k plan with a company match Tuition Reimbursement Conval is an Equal Employment Opportunity Employer. All qualified candidates will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Enjet Aero Malden manufactures precision sheet metal and machined turbine engine components. We offer competitive salaries based upon experience and generous benefits including medical, dental, 401k and paid vacation and holidays. Job Description We are looking for a motivated individual that can set up and run CNC vertical turning machines. Must have a complete knowledge of G & M codes along with the ability to edit programs. Proficiency with conversational controls a huge plus. Sheet metal machining, advanced CNC knowledge (no CNC operators), along with the ability to make decisions. A high level of B/P reading is required. Additional Information We offer competitive salaries based upon experience and generous benefits including medical, dental, 401k and paid vacation and holidays.

This individual would join a team of skilled professionals in our Machining/Manufacturing/Assembly facility. You would be working with other members of the manufacturing team on a regular basis (manual machining, saw cut, core cutter assembly/service). Extensive ongoing training is a key component of our continuous improvement mission. Position Description Double E Group is an international market leader in the engineering and manufacturing of web handling, material handling, and converting solutions. Our broad portfolio of products are marketed to the paper, tissue, film and foil converting industries. The CNC Machinist II would join a team of skilled professionals in our CNC Machining department. Working on various milling and turning machines (Haas, YCM, Matsuura, Mazak). Ongoing training is a key component of our continuous improvement mission. Responsibilities Operate CNC equipment in a low-volume, high-mix environment which includes multiple set-ups daily. Setting up and running machines in an efficient and productive manner. Responsible for part quality utilizing visual and hand inspection equipment. Interact directly with leads, engineering, and CNC programmers. Mount, install, align, and secure tools, attachments, fixtures, and pieces on machines, using hand tools and precision measuring instruments. Stop machines to remove finished pieces or to change tooling, setup, piece placement, according to required machining sequences. Review program specifications and blueprints to ensure machine set up and operations meet specification for finished piece dimensions. Cross training on variety of machines. May be requested to train new employees or employees designated to be cross trained Other duties, as assigned. Requirements Requirements Understanding of CNC programming G-code and Mastercam Math skills, including the ability to add, subtract, multiply and divide. Ability to read and comprehend instructions including blueprints. Must be physically able to handle heavy items including lifting, pushing, pulling, and positioning components up to 50 lbs. Excellent communication skills required to interact directly with Management, Engineering & Programming to collaborate on process improvements. Must be able to consistently stand for an entire 8-hour shift. Ability to work in a team environment Familiarity with lean and continuous improvement Knowledge of inspection equipment, such as micrometers, verniers, height gauges etc. Reliability and willingness to work overtime when necessary Education and Experience Minimum of 7 years' experience in a machine shop, Knowledge of basic machining practices and materials is a plus General mechanical knowledge/aptitude.

100,000 products and tools made of the strong metals tungsten and molybdenum: This has been our mission and passion for over 100 years, shared by 11,000 employees all over the world. We at the Plansee Group still have big plans - and we will get even better with you! Become part of our team! Position type: Hourly Responsibilities Studies work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces and machining parameters, interpreting geometric dimensions and tolerances (GD&T). Operates primary and high-end machinery including set-up and complete program understanding with editing ability to produce complex, non-routine parts and components. Perform assignments involving machining of surfaces at unusual or compound angles; items that require different or compound indexing; multiple lead and various other non-standard screw threads; helical or other types of gears, worm threads; or surfaces closely interrelated dimensions or complex configurations that usually require special adaption or extension of the use of conventional machine tools. Perform machining operations on CNC machine tools including shop floor programming and using such procedures as multiple setups, in place machining of fixtures, debugging first run programs and making or suggesting changes to machine tool program. Qualifications Studies work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces and machining parameters, interpreting geometric dimensions and tolerances (GD&T). Operates primary and high-end machinery including set-up and complete program understanding with editing ability to produce complex, non-routine parts and components. Perform assignments involving machining of surfaces at unusual or compound angles; items that require different or compound indexing; multiple lead and various other non-standard screw threads; helical or other types of gears, worm threads; or surfaces closely interrelated dimensions or complex configurations that usually require special adaption or extension of the use of conventional machine tools. Perform machining operations on CNC machine tools including shop floor programming and using such procedures as multiple setups, in place machining of fixtures, debugging first run programs and making or suggesting changes to machine tool program. Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Recruitment Team | *********************** Plansee USA LLC

Antron Engineering, located in Bellingham, MA, is looking to add a qualified CNC Machinist to our team! Qualified candidates should possess the ability to work in a fast-paced enviroment, work well with others, and take direction well. This is a full-time position for 2nd or 3rd shift with opportunity for overtime. Responsibilites: Operation of turning, milling and screw machines tools and running multiple machines when required. Uses blueprints and design sketches to ensure the proper dimensions and tolerance levels of the finished product. Familiar with standard concepts, practices, and procedures. Select, align and secure holding fixtures, cutting tools, attachments, accessories and materials on the machine. Relies on limited experience and judgment to plan and accomplish goals. Evaluate tooling to improve product quality. Performs a variety of tasks. Works under general supervision. Follow all company safety protocols A certain degree of creativity and latitude is required. Reports to a supervisor/manager. Benefits: Health Insurance Dental Insurance Vision Insurance Medical Flexible Spending Account Dependent Care Reimbursement Account Health Savings Account Employee Wellness 100% company paid Disability Inusrance 100% company paid Life Insurance Paid time off 401(k) with company match Paid Holidays Education Assistance Requirements 1-2 years in manufacturing background is a must. Should be comfortable using a computer and learning new software programs. Blueprint reading skills Knowledge of precision instruments Must work well with others, good interdepartmental work ethics are a must. Education Requirements High School Diploma or its equivalent.

The CNC Machinist will be responsible for operation of CNC machining centers in a high-volume manufacturing environment. The technician may be asked to support other processes or production lines as demand and production schedules dictate. 2nd Shift - Mon - Fri, 3:00pm - 11:30pm Essential Duties and Responsibilities: Develop and maintain strong, internal working relationships across ConforMIS. Understand the objectives, responsibilities, and mission of the Production department and works towards those goals. Prioritize and plan work activities; adapt for changing conditions. Operation and light maintenance of CNC machining centers and associated tooling. Hand deburring of metal medical implants after machining. Perform in-process inspection of CNC machined parts. Perform timely and accurate transactions of workflow in ERP system. Maintain CNC machine spare parts and consumable tooling. Assist in the investigation and implementation of corrective actions on product and process failures. Comply with all company policies and procedures including safety regulations, personal protective equipment requirements, Standard Operating Procedures, Work Instructions and Good Manufacturing Procedures. Interface with vendors to seek solutions for equipment repairs and refurbishment. Responsible for upkeep of manufacturing areas and provide a clean and safe work environment. Review all manufacturing documentation, assembly, inspection, test, packaging procedures and provide feedback. Support engineering activities such as process validations and equipment qualifications. Other responsibilities as assigned. Qualifications: High school diploma or equivalent. Technical education preferred. 1-5 years of experience in a medical device and/or regulated environment. Demonstrated English reading and writing skills. Familiarity with ISO Standards and Good Manufacturing Practices. Familiarity with Oracle (or equivalent) ERP systems and Microsoft Office Applications. Skills, Abilities, Competencies Required: Excellent written and verbal communication skills. Able to work accurately in a fast-paced, hectic, ever-changing environment with strong attention to detail. Demonstrated ability to monitor own work to ensure quality, accuracy and thoroughness. Strong organizational, analytical and time-management skills. Able to self-motivate and work both independently and as part of a team. Experience with inspection equipment (calipers, micrometers, comparator). Experience with metal polishing and other post-machining processes. Experience operating and maintaining CNC machining centers. Experience in a lean manufacturing environment a plus. Manual dexterity and coordination to load and unload parts during machining operations. Ability to work in a fast-paced environment and multitask. Comfortable with change. Ability to work as part of a team as well as independently. Familiar with Geometric Dimensioning and Tolerancing. Familiar with general machining techniques and practices. ConforMIS is an Equal Opportunity Employer

We are seeking a highly skilled CNC Machine Operator to take on a lead role in a precision manufacturing environment. This is a hands-on position for a top-level machinist who can independently set up, program, quote, and design for complex machining projects. Key Responsibilities: Set up, operate, and program CNC machine tools, including 5-axis machining centers and turnkey systems. Debug, troubleshoot, and optimize CNC programs to ensure peak performance. Work with B-axis and multi-tasking lathes; experience with Nakamura machines is a plus. Read and interpret blueprints, GD&T, and CAD/CAM models to produce precision parts. Design and manufacture tooling, fixturing, and workholding solutions for efficient machining. Work with exotic metals, superalloys, titanium, stainless steel, and aluminum for medical device and aerospace components. Lead continuous improvement initiatives, including cycle time reduction, process optimization, and lean manufacturing. Provide quoting, cost estimation, and technical consulting to support production planning. Qualifications & Experience: 5+ years of CNC machining experience, with a strong background in precision manufacturing. Expertise in multi-axis milling, turning, and Swiss-style machining. Strong mechanical aptitude-ideal candidates have a background in hands-on mechanical work, such as automotive or motorcycle repair. Ability to work with G-code, M-code, Mastercam, Fusion 360, or other CAM software. Familiarity with workholding strategies, cutting tool selection, feeds & speeds optimization. Experience in tight tolerance machining (+/- .0002”), high-precision production, and quality control (CMM, metrology tools). Background in medical devices, aerospace, or high-performance components preferred. Compensation: $50-$60 per hour + Overtime This is an opportunity for a lead machinist to take charge of high-precision machining projects in a cutting-edge environment. If you are a problem-solver, hands-on leader, and expert in CNC machining, we encourage you to apply.

100,000 products and tools made of the strong metals tungsten and molybdenum: This has been our mission and passion for over 100 years, shared by 11,000 employees all over the world. We at the Plansee Group still have big plans - and we will get even better with you! Become part of our team! Position type: Hourly Responsibilities Studies work orders, blueprints, engineering plans, materials, specifications, reference planes, locations of surfaces and machining parameters, interpreting geometric dimensions and tolerances (GD&T). Operates primary and high-end machinery including set-up and complete program understanding with editing ability to produce complex, non-routine parts and components. Perform assignments involving machining of surfaces at unusual or compound angles; items that require different or compound indexing; multiple lead and various other non-standard screw threads; helical or other types of gears, worm threads; or surfaces closely interrelated dimensions or complex configurations that usually require special adaption or extension of the use of conventional machine tools. Perform machining operations on CNC machine tools including shop floor programming and using such procedures as multiple setups, in place machining of fixtures, debugging first run programs and making or suggesting changes to machine tool program. Qualifications Seven to 10 years machining experience in a manufacturing production environment. Advanced knowledge of concepts, practices and procedures involving CNC machines. Familiarity with lean manufacturing and continuous improvement techniques. Ability to read and interpret machining and fabrication drawings. Solid math, geometry and trigonometry skills and understanding GD&T. Strong attention to detail, ability to communicate effectively and work in a team environment. Equal Employment Opportunity We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity and/or expression, status as a veteran, and basis of disability or any other federal, state or local protected class. Recruitment Team | *********************** Plansee USA LLC