Computer Aided Design Designer Jobs in Salem, MA

Job Title: Senior Optical/Mechanical CAD Designer Onsite Requirements: Experience with design, analysis and documentation of opto-/mechanical subsystems and components Familiarity with thermal analysis and structural analysis Familiarity with Optical systems and the design of EO/IR systems Job Description: Responsibilities: Develop complex designs for the optimum performance and ease of fabrication, assembly, and testing of complex imaging systems, thermal systems packaging solutions, novel materials, and innovative mechanisms. Experience with a wide range of platforms (i.e. manned/unmanned vehicles, aircrafts, ships, space crafts). Experience with the design and modeling of mechanical enclosures, optical assemblies with an understanding of requirements needed for Mounting/adjustment/actuation, alignment & measurement techniques, precision bearing, gearing & drive systems, structural/thermal analysis, and environmental testing. Must be able to work collaboratively in a multi-disciplinary team environment. Should demonstrate good written and oral communication skills. Required Skills: 5-8+ years of experience in Mechanical Design and Mechanical CAD experience (SolidWorks or other CAD software). Vast experience with mechanisms and complex mechanical assemblies. Looking for a minimum of 5 years of experience, but ideally someone would have 8+ years of experience. Experience with design, analysis, and documentation of opto-/mechanical subsystems and components. Familiarity with various fabrication techniques like machining, sheet metal, etc. Familiarity with thermal analysis and structural analysis. Familiarity with Optical systems and the design of EO/IR systems. Preferred Skills: Opto-mechanical experience is highly preferred. Candidates with this experience will stand out. Experience with various fabrication techniques like machining, sheet metal, etc. Experience with military standards, mil spec components. Experience with thermal analysis and structural analysis. Experience with Optical systems and the design of EO/IR systems. Experience with coordinating and executing system performance testing. Skill Matrix: Qualification Assessment Must Have Degree Level Bachelor's Degree Yes Design Computer-Aided Design 5 years Device Design 5 years Software AutoCAD 5 years CAD/EDA/TCAD 5 years CATIA 5 years Computer-Aided Manufacturing 5 years Process and Device TCAD 5 years Solidworks 3D Computer-Aided Design(CAD) 5 years Nice to Have Mechanical Mechanical - Opto 0 years ** 3rd party and subcontract staffing agencies are not eligible for partnership on this position. 3rd party subcontractors need not apply. This position requires candidates to be eligible to work in the United States, directly for an employer, without sponsorship now or anytime in the future. This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role. Due to the nature of the work, a United States Government Clearance is required to be eligible for the position. **

We are seeking a skilled Design Drafter to support the mechanical design and layout of custom control enclosures, as well as perform drafting tasks for assigned proposals and projects. This role primarily utilizes AutoCAD Lite and SolidWorks Electrical to create detailed mechanical and electrical designs. A working knowledge of Emerson products, third-party components, and computer networking equipment is essential for success in this position. Key Responsibilities: Develop and draft mechanical layouts for control enclosures using AutoCAD Lite and SolidWorks Electrical. Design and draft general wiring schematics, segment and loop schematics using AutoCAD Lite and SolidWorks Electrical. Create network architecture diagrams and detailed layouts. Support sales proposals and the FCS team with drafting and design needs. Assist the engineering team with control panel testing (HFAT), document generation, and I/O database management. Maintain and expand the CAD library of commonly used hardware components. Organize and manage the electronic CAD filing system on the corporate network for assigned projects. Prepare submittals and final documentation as required. Provide guidance to new drafters or temporary contractors on company drafting standards. Ensure high-quality standards in all work processes. Preferred Skills & Qualifications: Proficiency in AutoCAD Lite and SolidWorks Electrical. Understanding of process control concepts. Ability to interpret P&IDs, electrical schematics, loop drawings, and general arrangement drawings. Education & Experience: Associate degree required (Engineering or related field preferred). Minimum of 5 years of experience in drafting or an engineering-related field.

CAD Technician Duration: 6-month contract-to-direct hire Pay: $21/hr ========================================= Required Skills & Experience HS diploma or GED Experience working with a computer design program (Photoshop, drafting, 3D modeling, interior design, graphic design, etc.) Strong communication skills, both written and verbal Strong attention to detail Drafting experience or familiarity with CAD - Some college education (associates, technical, bachelors, classes) ========================================= Job Description Our telecommunications engineering client is hiring for CAD Technicians in Mansfield, MA. This individual will be creating diagrams, schematics, layouts, multi-view, and various drawings to scale in accordance with one of the country's largest telecommunication companies. One of the primary projects the client is currently working on is the transition to 5G, where everything will run on fiber optics. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law.

Our client strives to create a workplace culture that rewards high performance and encourages participation, and respect. Our client is a global leader in analytical laboratory technologies and solutions, seeking a highly motivated and skilled Design Engineer to join our dynamic team. This is an exciting opportunity to contribute to cutting-edge projects within a fast-paced and innovative environment. Initially, this is a 6-month contract position, offering a fantastic chance to immerse yourself in our client's culture and technology, with a strong potential for extension based on performance and project needs. If you're a passionate engineer looking to make a significant impact and grow your career with a renowned company, we encourage you to explore this opportunity. Our desire is to have an experienced Design Engineer who develops and designs detailed drawings with a co-decision-making role with support activities. Responsibilities: Providing technical design support to the Engineering department. Diagnosing and resolving technical Mechanical Engineering issues associated to Clinical Systems Development. Drive detailed mechanical designs of components and sub-assemblies including 3D CAD models and associated drawings. Collaborate with team members to develop innovative designs and technical solutions. Developing and sourcing appropriate materials and technologies for medical device design and construction. Collaborate effectively within a team environment that may span multiple geographical regions and time zones. Qualifications: Qualification in Mechanical, Electro/Mechanical Engineering A strong engineering background or experience with complex systems Proven record of accomplishment in design, highlighting your ability to innovate and solve problems 5 - 10 years' experience in 3D CAD preferably working with SolidWorks Design background in sheet metal fabrication, injection moldings for precision machinery Ability to work as part of a team Geometric Dimensioning & Tolerancing Position will be hybrid, 2 days remote and 3 days in Corporate with possibility for in-Corporate responsibilities upon request on certain days when remote. Pay range: $45/hr. to $55/hr. Must be legally authorized to work in the United States without requiring sponsorship for employment visa status (e.g., H-1B). This position does not offer visa sponsorship. EOE. Low cost benefits including Medical, Dental, Vision available

Our client, a world-leading Pharmaceutical Company in Raynham, MA is currently looking for an AutoCAD Drafter / Pharma Industry to join their expanding team. Job Title: AutoCAD Drafter / Pharma Industry Duration: 9 months contract, extendable up to 24 months Location: Raynham / Bridgewater, MA Note: The client has the right-to-hire you as a permanent employee at any time during or after the end of the contract. You may participate in the company group medical insurance plan Job Description: Summary: A skilled AutoCAD Drafter/Designer for the update and maintenance of building drawings for a large mixed-use manufacturing facility (588,000 sq ft) and a warehouse (100,000 sq ft). The successful candidate will play a critical role in ensuring all architectural, electrical, plumbing, equipment, and P&ID drawings are accurate and up-to-date as per the latest project requirements. Responsibilities: Update site master drawings based on project drawings to reflect the latest modifications and developments. Revise and maintain architectural layouts, electrical schematics, plumbing designs, equipment placements, and P&ID diagrams. Update safety-related documentation, including egress paths, shelter locations, and placement of fire extinguishers. Collaborate with the local facilities team to verify machine drawings, ensuring all updates are accurately reflected and cross-referenced with existing databases. Conduct regular site visits to gather information and validate drawings, working on-site 4-5 days a week. Operate within designated safety zones, adhering to all safety protocols, including the use of hearing protection, eye protection, and safety shoes. Some work on the roof may be required. Maintain a self-directed workflow, managing tasks effectively to meet project deadlines. Qualifications: Proficiency in AutoCAD and other relevant drafting software. Strong understanding of architectural, electrical, plumbing, and mechanical drawings. Experience with P&ID documentation and safety drawing standards. Ability to interpret and integrate project specifications into site master drawings. Excellent attention to detail and commitment to maintaining high-quality standards. Effective communication skills for coordinating with cross-functional teams. Ability to work independently and self-manage tasks. Previous experience in a manufacturing or warehouse environment is a plus. Working Conditions: On-site work in a manufacturing environment. Required to wear personal protective equipment (PPE), including hearing protection, eye protection, and safety shoes.

With a legacy dating back to 1941, Hart Companies stands as a pioneering force in Engineering and Construction, renowned for its expertise in delivering complex projects. Specializing in sectors such as Pharmaceutical and Biotechnology, Life Sciences, Water/Wastewater, Specialty Chemical, and diverse industrial segments, we continue to lead the way in innovation and excellence. Based in Rhode Island, Hart Companies is a full-spectrum Construction, Engineering, Architectural and Passivation organization with a workforce of over 200 employees. Our projects, spanning from small-scale to those exceeding $100MM, are executed across the United States and Puerto Rico. Thriving for over 80-years, we've continuously grown and diversified our clients across a multitude of industries. We are dedicated to maintaining the highest standards of performance in quality, safety, and integrity, delivering unmatched expertise on all projects for our valued customers and clients. We strive for excellence, not only by emphasizing a company culture that accentuates a People Priority environment, but also in the global perception of our work. Your daily contributions will have direct impact in shaping the Company's success and your own future. If you seek more than just a job, take the next step and apply today for a rewarding career opportunity! *Position is based in Cumberland, Rhode Island. No remote/hybrid work POSITION SUMMARY: Hart Design Group is seeking a Senior Process Mechanical Designer who will lead the design and development of process piping systems for pharmaceutical and biopharmaceutical manufacturing facilities. The role involves creating detailed designs and models with minimal guidance, ensuring compliance with industry standards and project requirements. Deliverables: Development and detailing of process piping designs for high-purity systems. Creation of accurate 3D models and coordination in a BIM environment. Execution of design assignments with minimal supervision and high accuracy. CORE RESPONSIBILITIES: Design and detail process piping systems for pharmaceutical and biopharmaceutical facilities, adhering to ASME BPE standards. Develop high-purity process systems and clean utility services designs. Utilize CADWorx and Isogen for piping design; leverage similar design modeling software as necessary. Collaborate with project teams in a BIM environment to ensure effective project coordination. Conduct site visits for design verification and project support as required. Ensure designs meet regulatory requirements and industry best practices. Provide technical guidance and support during the construction phase of projects. Maintain up-to-date knowledge of industry standards and technologies. Participate in project meetings and communicate design progress and issues. Review and validate design models and documentation to ensure accuracy. ESSENTIAL QUALIFICATIONS: Associate or Bachelor's Degree preferred, but not required Must possess a minimum of 10 years of experience as a Process Piping Designer, in pharmaceutical and biopharmaceutical manufacturing environments. Proficiency in modeling within a BIM project coordination environment. Experience with CADWorx and Isogen piping design software preferred; experience with similar software considered. Working knowledge of ASME BPE standards and clean utility services design. Ability to execute detailed design assignments with minimal supervision. Additional experience with Revit is a plus. Willingness to travel occasionally to worksites throughout Rhode Island, Massachusetts, and Connecticut. Hart Companies is committed to creating a diverse environment and is proud to be an equal opportunity employer. All employment offers with Hart Companies are subject to satisfactory completion of a criminal background check, discretionary driving record review, and drug screening.

BWT Pharma & Biotech is a market leader in providing specialist high-purity water systems and services to the pharmaceutical and life science industries. We are seeking a Mechanical Design Engineer to join our team. This is an exciting opportunity to be part of an innovative engineering organization committed to excellence in water treatment solutions. Role Overview As a Mechanical Design Engineer, you will be responsible for developing detailed 3D models for complex water treatment systems used in pharmaceutical and bioprocessing facilities. You will work with Autodesk Inventor and AutoCAD to generate designs that are directly utilized for fabrication in our on-site workshop. This role is ideal for a creative, self-motivated engineer who thrives in a collaborative environment. You will work closely with expert design engineers, workshop manager, and project team to ensure high-quality designs and seamless project execution. Job Responsibilities Develop, manage, and maintain 3D design models and associated drawings. Generate automated Bills of Materials (BOMs) for procurement. Design pipe routes and detailed equipment layouts for complex plantrooms. Collaborate with the workshop team to evaluate 3D models and identify continuous improvement opportunities in production and project execution. Maintain project drawing lists and coordinate drawing package distribution. Standardize CAD procedures within BWT and communicate design standards to project teams. Establish and maintain design protocols aligned with industry and regulatory requirements. Stay up to date with industry codes and software developments to enhance design accuracy and compliance. Required Skills & Experience Associate's Degree in a relevant field or equivalent work experience. Proficiency in 3D design software such as Autodesk Inventor or SolidWorks. Experience using AutoCAD. Strong computer skills and technical proficiency. Excellent attention to detail, as designs will be used directly for fabrication. Strong team player with a proactive approach to problem-solving. Preferred Skills & Experience Experience in water filtration / distribution processes. Knowledge of process skid design. Familiarity with fabrication of pressure vessels and piping. Understanding of ASME & ASME BPE design codes. Why Join BWT? Work on cutting-edge projects in the pharmaceutical and life sciences sector. Be part of a highly skilled engineering team with opportunities for growth and development. Collaborate in an innovative and supportive work environment. If you're passionate about mechanical design and want to contribute to groundbreaking engineering solutions, we'd love to hear from you! Apply today and take the next step in your engineering career with BWT Pharma & Biotech.

W2 ONLY NO THIRD PARTIES We're looking for a Mechanical Design Engineer to help optimize equipment design and reduce manufacturing costs-without sacrificing quality or performance. This role involves hands-on design work using SolidWorks, applying Design for Manufacturing and Assembly (DFMA) principles, and collaborating with cross-functional teams to improve production efficiency. 🔧 Key Highlights: 5-10 years of SolidWorks experience (3D modeling, drawings, assemblies, simulations) Proven track record in cost reduction and design optimization Strong knowledge of manufacturing processes (machining, sheet metal, welding, prototyping) Experience developing and testing prototypes in lab/workshop settings Familiarity with DFMA and collaboration across engineering, manufacturing & supply chain

Third Pole is on a mission to expand the lifesaving benefits of Nitric Oxide inhalation therapy, making it accessible to millions of respiratory challenged newborns and adults around the world. This is a rare opportunity to be part of a rapidly growing team, making a huge social impact, touching the lives of those we love and care about most. We are a fast-paced startup developing a game-changing technology that generates Nitric Oxide on demand, at the patient location, from the air we breathe. Our Third Pole community is grounded in the values of collaboration, embracing diverse ideas, commitment, and transparency without the politics found in most companies. Our motto is we are only successful if we all cross the finish line together! Sound like you? This position will lead and work on project teams to plan and support projects including the design, build, and test of next generation medical devices or significant improvements to existing products that are used by clinicians. The successful candidate will have deep technical capabilities in concept development, design, prototyping, testing, and intellectual property generation. They also will have shown the ability to lead and conduct research and development activities and exercise independent judgment to clarify and prioritize tasks to facilitate team decision making. They must also have demonstrated success at fostering relationships with internal stakeholders, external suppliers, and key opinion leaders. Responsibilities: · Lead and manage internal and external mechanical engineering resources in medical device development projects with minimal direction as needed. · Generate Project Plans and coordinate activities with product development teams, prioritize tasks and provide accurate project scheduling. · Work with external industrial design teams and OEM manufacturers to develop electromechanical systems and sub-systems. · Responsible for designing, building, and testing new concepts and iterating through the design process. · Develop System Architectures through modeling, simulation, and empirical testing to design, develop, debug and test systems to meet required performance, focus on pneumatic systems with arrays of sensors and actuators. · Perform written calculations and analytical modeling / analysis of new technologies in support of achieving product performance requirements. · Perform mechanical analysis including Statics and Dynamics, Finite Element Modeling, and Material Properties · Perform risk analyses using FMEA and fault tree methods. Work with other engineering disciplines (Mechanical, Electrical, and Software) to develop, implement, and verify system solutions for Class 3 medical devices (Safety critical). · Evaluate product performance on an on-going basis and initiate and evaluate required changes to the design to improve and optimize performance. · Interfaces with internal and external clinicians, physicians and thought leaders to create innovative products and features. · Ensure adherence to product specifications, industry standards, and quality and regulatory procedures and requirements. · Maintain accurate documentation of concepts, designs, drawings, and processes · Provide engineering and technical support of products introduced into both the domestic and international markets as well as physician in-service programs. · Oversee outside vendors and consultants as required. Requirements: · BS or MS (preferred) in Mechanical Engineering · 12+ years of experience developing and optimizing performance of Class 2 and/or Class 3 medical devices from concept through launch; experience with ventilators, pneumatic or hydraulic components and systems is required · Strong analytical and leadership skills · Expert in design of injection molded, machined, and sheet metal components. · Must be able to work in a fast paced, high energy, collaborative team that possesses a strong sense of urgency · Ability to work independently with high competency and little guidance. · Strong foundation of mechanical engineering fundamentals and ability to perform detailed engineering analysis including tolerance analysis & FEA. · Must be a creative problem solver that can think outside of the box to develop novel solutions to complex problems · Prior project management experience · Ability to search for appropriate technologies for conducting engineering concept feasibility to address product requirements and evaluate technology risk to a project · Knowledge of statistical techniques for experimental design and data analyses · Good technical documentation skills including drawings, assemblies, BOMs, component specifications. · Proficient computer skills with applicable software packages (e.g., Microsoft Office, Microsoft Power Point, etc.) and test data analysis packages (Minitab) · Experience with prototyping (including 3D printing, manual machining, etc.) · Understanding of computational analysis (FEA, system modeling, etc.) · Proficiency in tolerance analysis and descriptive statistics · Experience managing schedules for sub-tasks and work streams for which you are responsible · Capable of identifying project risks and proactively developing mitigation plans · Solid understanding of Design Controls and experience with FDA QSR 21 CFR Part 820 and ISO 13485, related external standards, quality controls and manufacturing methods · Significant experience with the complete lifecycle of development including conducting needs assessment and translating to requirements, concept and IP generation, technology development, detail design and manufacturing systems development, development of system/subsystem level requirements, risk management, fulfilling regulatory requirements, test method development, and product verification/validation · Strong CAD skills are required, OnShape experience is desired (SolidWorks experience is acceptable) Equal Opportunity Employer Third Pole, Inc. provides equal employment opportunity (EEO) to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law.

Are you ready to make a difference? At Greenlight Guru, our leading SaaS platform helps some of the world's most innovative medical device companies bring higher quality, life-changing products to market faster. Our cloud-based technology serves 1000+ global customers with a platform that powers end-to-end product lifecycle excellence from idea to commercialization to postmarket surveillance. Headquartered in Indianapolis, IN, we are a remote-first company on a mission to improve the quality of life. Having raised over $120M from top-tier investors, we are rapidly scaling with a driven and relentless commitment to helping our customers succeed. Since 2021, we have been part of JMI Equity, a growth equity firm focused on leading software companies. About this role: We are hiring a dynamic Principal Product Designer to join our Product and Design Team. As the Principal Product Designer, you will be responsible for driving the overall user experience and design strategy for our suite of products. You will work closely with cross-functional teams-including Product Managers, Engineers, Customer Success and Marketing-to create user-centered designs that are intuitive, scalable, and aligned with the strategic goals of the business. You'll play a pivotal role in shaping the future of our platform by ensuring that it meets the unique needs of healthcare professionals and administrators while also delivering exceptional user experiences. In this hands-on leadership role, you will be responsible for contributing to some of the most used product areas, mentoring designers, setting design standards, and advocating for best practices across the organization. Your contributions and responsibilities: Lead and inspire a team of designers, ensuring high-quality work and maintaining consistency across the entire product suite. Champion design thinking, user-centered design principles, and innovation across all product touchpoints. Collaborate closely with product, engineering, and business teams to define the product roadmap, user stories, and overall design vision. Lead the end-to-end design process for complex, enterprise-level products, from research and ideation to prototyping and final execution. Drive product innovation by understanding and interpreting user needs, business goals, and market trends to inform the design direction. Own the design process for large, complex, and strategic features, ensuring alignment with business objectives and user needs. Mentorship and Team Development: Provide guidance and mentorship to junior and mid-level designers, fostering a collaborative and growth-oriented team culture. Establish design standards, patterns, and best practices that drive consistency, scalability, and quality across products. Conduct design reviews, provide constructive feedback, and ensure the design team's output aligns with the company's brand and strategic goals. User Research and Testing: Lead user research initiatives to gather insights from healthcare professionals, administrators, and other stakeholders to inform design decisions. Develop user personas, journey maps, and wireframes to visualize complex workflows and identify pain points in the user experience. Conduct usability testing, analyze results, and iterate designs based on feedback to ensure the highest quality product. Cross-functional Collaboration: Partner with Product Managers to define and prioritize features based on customer needs, business impact, and technical feasibility. Work closely with Engineering to ensure the seamless translation of designs into fully functioning, high-performance software. Communicate design decisions and rationale to executives, stakeholders, and other teams to align on vision and expectations. Design Systems: Lead the development and maintenance of a unified design system that supports product scalability and efficiency. Ensure consistency in the visual and interaction design language across all products and platforms. Experience: 8+ years of experience as a Product Designer with a strong portfolio that demonstrates your ability to design complex SaaS products, particularly in the enterprise space. Proven experience leading design teams and projects in a collaborative, cross-functional environment. Experience working on B2B products. Expertise in user-centered design, interaction design, and visual design principles. Skills: Strong proficiency in design and prototyping tools (e.g., Figma, Protopie). Deep knowledge of user research methods (user interviews, surveys, usability testing, A/B testing, etc.). Ability to craft and maintain a design system that balances consistency with flexibility. Exceptional communication skills, both verbal and written, with the ability to articulate design concepts clearly to non-design stakeholders. A keen eye for detail and a passion for creating intuitive, high-quality user experiences. Benefits you'll enjoy: Supportive teammates and co-workers who care deeply about our mission. Flexible Paid Time Off policy and working hours. Home Office stipend for new hires. Health insurance options include a 100% company-paid plan (vision, medical, dental). 401k (with company match). Equity Program Eligibility (based on role and/or tenure). Three months of paid maternity leave. Disability insurance. This role will be located within a commutable distance of Indianapolis, Atlanta, Chicago, New York OR Boston areas. The base salary range for this role is $140,000 - $150,000. Actual base salary is determined by factors such as, but not limited to, experience, education, skills, and geographic location. Greenlight Guru is an Equal Opportunity Employer. Individuals seeking employment at Greenlight Guru are considered regardless of race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, gender identity, or sexual orientation. #J-18808-Ljbffr

Senior Optical/Mechanical Designer in the design, fabrication, integration and test of advanced sensor systems. Responsibilities: Develop complex designs for the optimum performance and ease of fabrication, assembly and testing of complex imaging systems, thermal systems packaging solutions, novel materials and innovative mechanisms Experience with a wide range of platforms (i.e. manned/unmanned vehicles, aircrafts, ships, space crafts) Experience with the design and modeling of mechanical enclosures, optical assemblies with an understanding of requirements needed for Mounting/adjustment/actuation, alignment & measurement techniques, precision bearing, gearing & drive systems, structural/thermal analysis and environmental testing. Must be able to work collaboratively in a multi-disciplinary team environment Should demonstrate good written and oral communications skills. Skills: 5-8+ years experience in Mechanical Design Mechanical CAD experience (Solidworks preferred). Vast experience with mechanisms and complex mechanical assemblies. Experience with design, analysis and documentation of opto-/mechanical subsystems and components Familiarity with various fabrication techniques like machining, sheet metal, etc. Familiarity with thermal analysis and structural analysis Familiarity with Optical systems and the design of EO/IR systems Experience with military standards, mil spec components Experience with coordinating and executing system performance testing US Citizen with ability to obtain interim clearance is required to start

To view your favorites, sign in with your Apple Account. Imagine what you could do here! At Apple, new ideas have a way of becoming extraordinary products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish. Dynamic, hardworking people and inspiring, innovative technologies are the norm here. The people who work here have reinvented entire industries with all Apple Hardware products. The same passion for innovation that goes into our products also applies to our practices strengthening our commitment to leave the world better than we found it. Join us to help deliver the next groundbreaking Apple product!In this visible role, you will be directly responsible for the physical implementation of design partition(s) (from netlist to tapeout) for a highly complex SoC utilizing innovative process technology. Description • Work with the logic design team to understand partition architecture and drive physical aspects early in the design cycle.• Complete netlist to GDS2 implementation for partition(s) meeting schedule and design goals.• Timing, physical and electrical verification, and driving the signoff closure for the partitions.• Resolve and improve design and flow issues related to physical design, identify potential solutions, and drive execution.• Drive optimization of PnR partitions, to achieve best Power/Performance/Area. Minimum Qualifications Key Qualifications Minimum BS and 3+ years of relevant industry experience. Recent successful tapeouts in deep submicron technology. Knowledgeable in partition level P&R implementation including floorplanning, clock & power distribution, timing closure, and physical & electrical verification. Strong knowledge of PD construction & analysis flows and methodology. Shown ability to execute to stringent schedule & die size requirements. Strong interpersonal skills. Experienced in industry standard tools and understanding their capabilities and underlying algorithms. Preferred Qualifications Education & Experience Minimum BS and 3+ years of relevant industry experience. Additional Requirements Apple is an equal opportunity employer that is committed to inclusion and diversity. We take affirmative action to ensure equal opportunity for all applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status, or other legally protected characteristics. Learn more about your EEO rights as an applicant. To view your favorites, sign in with your Apple Account. #J-18808-Ljbffr

The Cable Designer will design and document system interconnects (cable and harness) and assemblies from rough sketches and/or verbal instructions from the engineering staff. Basic design calculations and initiating block diagrams, schematics, cable drawings, wire diagrams, wire run lists and fabrication documentation. *Due to the nature of this position, US Citizenship is required to obtain a Secret Level Clearance* Requirements BS in Electrical Engineering or Associates degree with 2 additional years Must have knowledge of electronic design for applications, including connector selection, wire types/sizes, voltage drops, electro-mechanical packaging, electrical fabrication & assembly techniques. Should be capable of developing own concepts, design layouts, and basic calculations to support their design. Experience with cable/connect configuration management. Candidates should have a clear understanding of cable fabrication standards and processes. Must have good communication skills, require little or no supervision, and possess good creative skills. Candidates must be enthusiastic, innovative and motivated self-starters able to work independently, or with an interdisciplinary group, to achieve program requirements. 2D and 3D CAD Software (preferably SolidWorks), Cable design software (Zuken E3 or other). Knowledge of electronic design for aerospace applications, including connector selection, wire types/sizes/derating, voltage drops, electro-mechanical packaging, electrical fabrication & assembly techniques Experience in SolidWorks or Zuken. Knowledge of Military, ASME & IEEE standards Familiar with aircraft, missile, spacecraft and ground support equipment. #Clearancejobs Desired Skills and Experience Cable Design Engineer Burlington, MA (Onsite) Job Description The Cable Designer will design and document system interconnects (cable and harness) and assemblies from rough sketches and/or verbal instructions from the engineering staff. Basic design calculations and initiating block diagrams, schematics, cable drawings, wire diagrams, wire run lists and fabrication documentation. Requirements * BS in Electrical Engineering or Associates degree with 2 additional years * Must have knowledge of electronic design for applications, including connector selection, wire types/sizes, voltage drops, electro-mechanical packaging, electrical fabrication & assembly techniques. * Should be capable of developing own concepts, design layouts, and basic calculations to support their design. * Experience with cable/connect configuration management. * Candidates should have a clear understanding of cable fabrication standards and processes. * Must have good communication skills, require little or no supervision, and possess good creative skills. * Candidates must be enthusiastic, innovative and motivated self-starters able to work independently, or with an interdisciplinary group, to achieve program requirements. * 2D and 3D CAD Software (preferably SolidWorks), Cable design software (Zuken E3 or other). * Knowledge of electronic design for aerospace applications, including connector selection, wire types/sizes/derating, voltage drops, electro-mechanical packaging, electrical fabrication & assembly techniques * Experience in SolidWorks or Zuken. * Knowledge of Military, ASME & IEEE standards * Familiar with aircraft, missile, spacecraft and ground support equipment. Beacon Hill is an equal opportunity employer and individuals with disabilities and/or protected veterans are encouraged to apply. California residents: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. If you would like to complete our voluntary self-identification form, please click here or copy and paste the following link into an open window in your browser: ***************************************** Completion of this form is voluntary and will not affect your opportunity for employment, or the terms or conditions of your employment. This form will be used for reporting purposes only and will be kept separate from all other records. Company Profile: Beacon Hill Technologies, a premier National Information Technology Staffing Group, provides world class technology talent across all industries utilizing a complete suite of staffing services. Beacon Hill Technologies' dedicated team of recruiting and staffing experts consistently delivers quality IT professionals to solve our customers' technical and business needs. Beacon Hill Technologies covers a broad spectrum of IT positions, including Project Management and Business Analysis, Programming/Development, Database, Infrastructure, Quality Assurance, Production/Support and ERP roles. Learn more about Beacon Hill and our specialty divisions, Beacon Hill Associates, Beacon Hill Financial, Beacon Hill HR, Beacon Hill Legal, Beacon Hill Life Sciences and Beacon Hill Technologies by visiting ************* Benefits Information: Beacon Hill offers a robust benefit package including, but not limited to, medical, dental, vision, and federal and state leave programs as required by applicable agency regulations to those that meet eligibility. Upon successfully being hired, details will be provided related to our benefit offerings. We look forward to working with you. Beacon Hill. Employing the Future™

We deliver mission-critical embedded computing solutions to operate in even the harshest of environments. Founded in 1985 to develop Multibus II boards, we've expanded our offering over four decades to become a trusted, reliable solutions provider in critical embedded applications. We have a proven record of delivering technology to the world's leading OEMs across industries including defence, telecoms, and aerospace. We operate facilities in Colchester and Theale in the United Kingdom and Woburn, MA and Los Angeles, CA in the United States. Concurrent is a public company, quoted on AIM on the London Stock Exchange. The Role Reporting to the CAD Team Lead, this is an exciting opportunity to join our growing engineering team designing complex multi-layer SMT and PTH PCBs. The PCBs are typically 16 to 22 layers with high-speed signals and high component densities, including BGAs. This role is ideal for a self-motivated person keen to get stuck in with part creation and library maintenance, the generation of PCB assembly documentation and data, and collaborating with our Operations teams to ensure the products are designed for manufacture. What will I be delivering? The key duties and responsibilities include: Laying out PCBs of varying technology to rules supplied by the Design Engineer using High Speed design practices with impedance control. A fully connected and checked PCB ready for PCB fabrication. Output manufacturing data for PCB fabrication and Assembly. Ensuring all processes are completed as per ISO9001-2015. Creating stack-ups and calculation impedances. Maintenance and support of existing PCB designs What do need to bring with me? Essential knowledge and experience: Extensive experience laying out High-Speed, HDI PCBs (our designs operate up to DDR5, PCIe Gen5 and 100Gb Ethernet). Candidate to be qualified to HNC level in Mechanical or Electronic Engineering or have significant industry experience. Use of the Cadence Allegro PCB tool-set, using the High Speed and Miniaturization options is preferred, but experience with Mentor Graphic Expedition or Altium will be considered (training is available). The ability to read schematics and reflect design intent in PCBs. Experience of working closely with electronics hardware, SI simulation and mechanical engineers balancing challenging engineering requirements. Good knowledge of design for manufacture and Design for Test requirements. Desirable technical skills: Experience of calculating impedances and creating PCB stack-ups. Experience liaising with PCB Fabricators. Use Polar Speedstack. Use of Microsoft Word and Excel. The ability to output manufacturing packs. Able to work under time pressure. Experience of working on projects from early concepts and design studies to manufacture. Experience of working closely with suppliers and quality to support investigations. Knowledge of simulation techniques . Knowledge of file management systems (PDM/PLM). Behavioural competencies: Detail oriented. Methodical. Ability to work independently. Able to work under time pressure. Clear communicator. Good housekeeping of design files. Benefits for working at Concurrent Health Insurance Principal 401K Plan 20 days' vacation + 7 public holidays 5 sick/personal days per year Work Eligibility In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire. To conform to U.S. Government export control regulations, applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or Department of Commerce. Equal Opportunity Statement Concurrent recognises and actively promotes the benefits of a diverse workforce and is committed to treating all employees with dignity and respect regardless of race, gender, disability, age, sexual orientation, religion or belief. Discrimination on any of these grounds is expressly forbidden. We therefore welcome applications from all sections of the community.

Our client in Marlboro, MA is looking to bring on a Medical Systems Design Engineer. This is a full-time direct opportunity. Responsibilities Design, implement, test, and release analog/digital PCB designs for new medical products. Debug, integrate, and test hardware and embedded firmware designs at the system level. Lead initiatives and develop advanced projects and systems. Design, implement, test, and release embedded firmware for new medical products Document and verify hardware and embedded firmware designs in accordance with applicable medical device development standards (e.g. requirements/design specifications, risk analysis, verification & validation protocols/reports) Support and interact with other departments, including R&D, technical support, field service, and manufacturing. Support medical device regulatory compliance efforts. Qualifications Bachelor's Degree in Electrical Engineering A minimum of 8 years of work experience in hardware and embedded firmware development: 4 of the 8 years in an ISO 13485 compliant medical systems development environment Schematic Capture and PCB layout using Orcad and/or Altium. Analog/Digital circuit design including FPGAs. Communications over SPI, I2C, CAN, RS232, Ethernet, WiFi, Bluetooth. Proficient in C, C++, and Verilog programming languages Development of embedded firmware for ARM microprocessors or equivalent

Bedford, MA FORMULATRIX , a world leader in robotic automation for life science and pharmaceutical research, is seeking ambitious junior to mid-level mechanical design engineers to join our team at our Bedford site. To solve the types of problems we face, we are looking for hard-working individuals who are organized, analytical, and have a knack for troubleshooting. Ideal candidates are interested in continuous learning and development, not only in design engineering but in all of the other aspects of bringing a product from idea to commercial launch. This position offers a great deal of flexibility for a mechanical engineer. We have a full suite of equipment for in-house prototyping, including a CNC machine, laser cutter, Bridgeport mill, lathe, electronic workstations, and 3D printers. Having this equipment capabilities in-house provides the ability to rapidly ideate, fabricate, and test ideas as we progress through the trial-and-error iterations of the design process. Your job will consist of testing new designs, suggesting design improvements, and doing hands-on troubleshooting. You will provide feedback to and work with our off-shore colleagues, craft prototypes, and assist the product manager with customer or engineering issues. This position requires a team player with a can-do attitude. While your work will be individual, ongoing team communication and problem-solving are key. Job Requirements Bachelor's degree in Mechanical Engineering or similar Project/team Leadership experience is highly desired Strong organizational and communication skills Fabrication skills (desired) Experience with programming and robotics (desired) At FORMULATRIX we are dedicated to building a diverse and inclusive workplace. Women, people of color, and people from other historically underrepresented groups in the engineering field are strongly encouraged to apply. Also, if you are excited about this role but your past experience doesn't align perfectly with every point in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles! FORMULATRIX requires dedication from our employees, and we are committed to hiring only the best of the best. All engineering, support, and management employees work 45-hour work weeks. In return, FORMULATRIX offers a rewarding compensation package including base salary, bonuses, profit sharing, health and dental benefits, AFLAC supplemental insurance, a 401K retirement plan, a collaborative atmosphere complete with site-wide lunches on Fridays, and excellent growth opportunities. Notes: We are not offering visa sponsorship at the present time; therefore, only eligible candidates will be contacted. How to Apply via Email ** RESUMES SUBMITTED WITHOUT THE INFORMATION REQUESTED BELOW WILL NOT BE CONSIDERED ** To be considered for this position, please email ******************** with the words "ME Design Engineer" in the subject line. You must include a copy of your resume, (Word, PDF, plain text or RTF only) and answer the following questions in the body of your email: What are your salary requirements? When can you start? Are you willing to work onsite in Bedford, MA? Are you legally authorized to work in the United States? Will you now, or in the future, require sponsorship (i.e. H-1B visa, etc.) to legally work in the U.S.? If so, are you currently on Optional Practical Training (OPT), and if yes, are you eligible for a 24-month OPT extension based on a degree in a qualifying STEM field from a U.S. institution? What is it about this position that interests you? ** NO RECRUITERS OR AGENCIES **

We have an opportunity for an ambitious, self motivated person to join our forward thinking team as a SR. Refrigeration Design Engineer. In this role you will be the primary point of contact between Refrigeration and engineering; assisting both our standard production line and our custom manufacturing team, where needed. Your contribution will be pivotal in ensuring projects hit all timing and fiscal benchmarks. You will be expected to develop designs, propose solutions, and generate BOM's, accurately and efficiently. In this role you will have the opportunity to work on some very interesting projects for industry leading clients. This will all be accomplished with the latest technology and the full support of engineering, manufacturing, and service. Who we are We are an innovative manufacturing company that focuses on growth and technology and enjoys having fun along the way. We have built an extensive and loyal customer base spanning aerospace, electronics, and automotive with significant involvement in the global expansion of the battery industry. We work with many of the major tech companies as well as brands such as Tesla, Rivian, Lucid, Meta, Google, and Harley Davidson. Primary responsibilities Perform calculations related to single stage and cascade refrigeration designs Appropriately size evaporators, condensers, line sizes, heat exchanges, condensing units, fan blades, and blower wheels Create refrigeration state diagrams to calculated desired pressure, temperature, mass flow, and component capacity for the dynamic conditions in environmental chambers, Load calculations including forced air convection over a customers product, to ensure systems can achieve customer requirements Perform calculation to adequately size open coil & finned sheath heaters Perform calculation to achieve set humidity points Hands on evaluation of refrigeration system performance in manufacturing test environment. Develop solutions aimed at increased efficiency and repeatability. Iterate on existing refrigeration designs Create all refrigeration schematics in Solidworks electrical, following all ANSI standards. Generate and execute engineering change orders. Generate a Bill of Material in conjunction with other disciplines Help create and maintain work and test validation procedures. Ensure compliance with all EPA and EU requirements. Troubleshoot existing designs and develop creative improvements for efficiency and surge capability, along with testing and manufacturing throughput. Lend support to service with field issues and installations Review and comment on supplier data as required. Skills A firm understanding of thermodynamics, required. Including convection heat transfer, plate heat exchange heat transfer and refrigeration mass flow calculations. Practical refrigeration experience with an understanding of good plumbing practices including: oil migration, avoiding pressure drop, liquid migration in low temperature systems, and component mounting to ensure safe transit. Ability to identify, size, and troubleshoot all traditional refrigeration components. Ability to analyze pressure and temperature data of a refrigeration system for troubleshooting and system analysis. A four year degree in Mechanical/Refrig. Engineering, preferred. Five or more years of Refrigeration engineering experience, preferred. Five or more years of designing schematics for refrigeration circuits, preferred. Experience designing medium & low temp range systems (R410, R404, R449), preferred. Knowledge of 2D CAD software is required, SolidWorks Electrical software preferred. Knowledge of ultra low temperature cascade systems (R508), preferred. Knowledge of electrical wiring, preferred. Understanding of controls circuits & PLC's, preferred Ability to troubleshoot, required. Great communication skills, required Good mechanical aptitude and knowledge, required. Great attention to detail, required Familiarity with current refrigeration engineering trends. An innovative mindset and positive attitude. What do we offer: A truly collaborative environment with a Senior Management Team that helps to shape the future of the Company. Competitive salary and benefits. Tuition reimbursement. A casual dog friendly work environment with a small company atmosphere! Check out our website and facebook for a look at our company culture and our four legged team members. *Associated Environmental Systems is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating a welcoming and inclusive environment for all. *Applicants must have the ability to work permanently in the United States without sponsorship, now and in the future.

Join a team committed to a mission! At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers' success. We empower our teams, contribute to our communities, and operate sustainable. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Are you ready to unleash your potential? The National Security Sector at Leidos currently has an opening for an Engineering Design/Drafter to work with our team in Natick, MA. This is an excellent opportunity to showcase your talents and expertise to support our US Army Combat Capabilities Development Command - Solider Center (CCDC-SC) mission. Leidos National Security Sector provides a diverse portfolio of systems, solutions, and services covering land, sea, air, space, and cyberspace for customers worldwide. Solutions for Defense include enterprise and mission IT, large-scale intelligence systems, command and control, geospatial and data analytics, cybersecurity, logistics, training, and intelligence analysis and operations support. Our team is solving the world's toughest security challenges for customers with “can't fail” missions. To explore and learn more, click here! Join a team committed to a mission! Responsibilities - What You'll Be Doing: Create and maintain Mechanical, Electrical and Textile Technical Data Packages (TDPs) that comply with Military and Commercial specifications (MIL-STD-100 and ANSI Y14). Review components for ease of manufacture, form, fit and function relative to overall assemblies and manufacturing practices. Resolve design issues in customer product lines as identified by in-house evaluations, solicitations and manufacturers. Revise and/or redesign functional and non-functional piece parts relative to customer products. Evaluate old designs and make comparable commercial equivalent recommendations for part replacements. Assess, write and incorporate Drawing Revisions (DR's) and Engineering Change Proposals (ECP's) for existing DoD customer equipment. Creating detailed technical drawings and models using specialized software to visualize and design complex engineering projects. Utilizing SolidWorks software for 3D modeling, simulation, and documentation in mechanical design and engineering projects. Required Experience, Skills, and Education: Bachelor's Degree in Drafting and Design, Mechanical Engineering, or related discipline with 2 or more years of experience. Additional training, experience, and/or certifications may be considered in lieu of education requirement. US Citizen: Successful completion of background check to obtain/maintain a government common access card (CAC) upon hire. Demonstrated abilities with AutoCAD Proven talents with Modeling, 3D Modeling, and producing drawings from models. Solid background in producing production level drawings (ANSI Y14.100). Be capable of taking fabricated part and produce a model and drawings of the part. Strong knowledge and understanding of dimensioning and tolerancing (ANSI Y14.5). Established experience in mechanical, electrical and textile design drafting. Strong attention to detail. Preferred Experience, Skills, and Education: Preferable the candidate will have experience working with Army drawings. Knowledge of Department of Defense (DoD) and American National Standards Institute (ANSI) drafting standards and practices. Proven knowledge and experience with PLM Windchill. Ability to prioritize tasks and work on multiple actions at any given time. Excellent analytical and technical skills Excellent communication skills. Ability to work independently as well as with others in a team. EIO2025 Original Posting Date:2025-02-06 While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $67,600.00 - $122,200.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job Title: Design Engineer Onsite Requirements: Experience in one or more of the following areas - mechanical/mechanisms, optical-mechanical, electronic packaging or structural. Knowledge of mechanical fabrication and assembly techniques including conventional machines of metal. Additive manufacturing, not including molding, knowledge will also be considered. Opto-mechanics, structures, or electronic packaging design. Knowledgeable of design for manufacturability using conventional machining. Knowledgeable of ASME, GD&T and MIL-Specs required. Job Description: The candidate will design and document mechanical components and assemblies in collaboration with engineering staff. He/she would be responsible for performing design calculations and initiating design concepts, layouts, and finished manufacturing drawings specifying dimensional tolerances, surface finishes, and materials. There will be preparation of engineering release/revision documentation, as well as assisting in producing fabrication orders and supporting the fabrication and assembly process, as required. Required Skills: Candidate must have the following qualifications: Experience in one or more of the following areas - mechanical/mechanisms, optical-mechanical, electronic packaging, or structural. Knowledge of mechanical fabrication and assembly techniques including conventional machining of metal. Additive manufacturing, not including molding, knowledge will also be considered. Opto-mechanics, structures, or electronic packaging design. Knowledgeable of design for manufacturability using conventional machining. Knowledgeable of ASME, GD&T, and MIL-Specs required. Knowledge of ASME Y14 family of standards, and specific experience using ASME Y14.5 GD&T. Minimum 4 years of experience designing with SolidWorks. Candidates without SolidWorks experience will not be considered. Capable of developing own concepts, design layouts, and basic calculations to support their design. Must have good communication skills, require little or no supervision, and possess good creative skills. Candidates having experience primarily with plastic and/or molding design will not be considered. Candidates with only low-level design skills (simple bracket design, drafting, etc.) will not be considered. Must show experience designing assemblies with some complexity. The majority of a candidate's experience should be designing machined components. Sheet metal experience will not be considered valuable. Must have good communication skills, require little or no supervision, and possess good creative skills. Candidates must be enthusiastic, innovative, and motivated self-starters able to work independently, or with an interdisciplinary group, to achieve program requirements. They must possess strong oral and written communication skills, and must be able to present findings/results to internal and external organizations. Preferred Skills: Familiarity with standards and established practices in; aircraft, missile, spacecraft, and ground support equipment. Capable of developing own concepts, design layouts, and basic calculations to support their design. Must have good communication skills, require little or no supervision, and possess good creative skills. Education: Bachelor's Degree is preferred but not required; a minimum of 9 years of relevant experience. Skill Matrix: Qualification Assessment Must Have Mechanical Designer 5 years Mechanism Design 5 years Product Design 5 years Mechanical Knowledge of ASME Y14 family of standards, and specific experience using ASME Y14.5 GD&T. 1 year Mechanical - Electronic Packaging 5 years Mechanical Engineer 5 years Software SolidWorks 3D Computer-Aided Design (CAD) 5 years Nice to Have Degree Level Yes Mechanical Mechanical - Aircraft/Missile/Satellite System 0 years Mechanical - Opto 0 years ** 3rd party and subcontract staffing agencies are not eligible for partnership on this position. 3rd party subcontractors need not apply. This position requires candidates to be eligible to work in the United States, directly for an employer, without sponsorship now or anytime in the future. This client is a US Federal Government contractor and is legally required to hire US Citizens. US Citizens will only be considered for this role. Due to the nature of the work, a United States Government Clearance is required to be eligible for the position. **