Carpenter Jobs in Texas

Trades/Skilled Trades/Carpenter Apprentice Job Title: Carpenter Apprentice Reports To: Carpenter FLSA Status: Non-exempt SUMMARY: Assists carpenter in constructing, erecting, installing, and repairing structures and fixtures of wood, plywood, and wallboard. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Gathers tools and supplies to be used at work site. Maintains tools and equipment and keeps supplies and parts in order. Cleans work area, machines, tools, and equipment. Performs other routine duties. Performs other duties as may be assigned by the Lead Carpenter, Carpenters, or Plant Services Supervisor. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED). Experience in carpentry service preferred. LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to learn carpentry technical information. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. CERTIFICATES, LICENSES, REGISTRATIONS: Possess current driver's license. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually moderate. Revised Date: November 2, 2015 The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities, duties, and skills that may be required. Attachment(s): Carpenter Apprentice

A Team Home Services is looking for a carpenter apprentice to join our team based in and around Austin, Texas! This tradesperson will be responsible for constructing wooden structures and fixtures as well as providing on-site installation, repairs, and maintenance. The ideal candidate is prompt and reliable, has superior support skills and excellent communication. He/she will have a proven track record of client satisfaction and is motivated to provide superior service. Responsibilities: Serve as the apprentice for the first 3-6 months then begin running your own truck and installing and finishing structural framework such as floors, cabinets, walls, ceilings, roofs, sheetrock, beams, and columns. Study and interpret blueprints, sketches, or building plans to understand the specifications and dimensions of the structure. Measure, cut, and shape materials such as lumber, plywood, and other building materials according to the specifications outlined in the blueprints. Install doors, windows, cabinets, molding, and other wooden components securely and in a level and plumb manner. Report any damages, repairs, or deteriorating wooden structures and components, including roofs, floors, and walls. Adhere to safety guidelines and best practices to prevent accidents and maintain a safe working environment. Keep tools and equipment in good working condition, performing routine maintenance and repairs as needed. Qualifications: High school diploma or equivalent. 1-2 years experience in drywall Proficiency in using a variety of hand and power tools. Knowledge of construction and safety regulations. Strong mathematical and measurement skills. Attention to detail and precision in work. Excellent problem-solving and communication skills. Valid driver's license Heavy lifting of at least 55 lbs Provide 3 references Pay rate: $20-$23 hourly Benefits eligible after 90-day probationary period: Paid Holidays Paid Time Off Paid Birthdays Paid Sick Time Option to enroll in Medical, Dental, and Vision insurance Option to enroll in 401(k) A tid bit on us: We are a home service and remodeling company dedicated to providing the highest customer service. Our customers are located all around and just outside of Austin. Our services include outdoor living spaces, kitchen and bath remodeling, roofing, solar, and electrical services. We are a locally owned family business, and with that said there will be plenty of room for growth and, just as important, work-life balance.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Assist Carpenter in planning, lay-out, and performing all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Must have the ability to take direction from a higher skilled worker or foreman. Key Responsibilities 1. Effective math skills - add, subtract, multiply, and divide. 2. Eliminate WASTE such as waiting, rework, transporting, material storage, and time. 3. If unsure about any aspect of the work or issues regarding safe practices, ask a supervisor before continuing. 4. Learn and understand all safety hazards related to the work. 5. Learn to safety and effectively use or operate work related tools and equipment. 6. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others. 7. Maintain positive working relationships with all members of the crew. 8. Produce high quality work, safely and productively at all times. 9. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Minimum Job Requirements 1. Must have a minimum of one to two years' experience in the industrial/commercial construction industry and have a general understanding of the carpentry trade. 2. NCCER Core Curriculum and/or High School Diploma or equivalent preferred. 3. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. Must be able to comply with all safety standards and procedures 5. Must be able to move in and around confined spaces and uneven areas. 6. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 7. Will climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. 8. Will lift, push or pull objects up to 50Ibs. on an occasional basis 9. Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefits: Market Competitive Salary (paid weekly) Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting after 60 days of continuous employment Sick Leave and Paid Time Off (PTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Full-time Description We are a leader in Millwork, Cabinet and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen. Salary Description $27.00 to $39.00 hourly based on experience

Responsibilities Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. Selects, loads, and hauls job material to work site. Prepares layout of form or fixture to be fabricated using lines or grades. Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes Qualifications Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.

Austin Industries is one of the nation's largest, most diversified U.S.-based construction companies. With more than 7,000 employee-owners, Austin Industries provides nearly every type of civil, commercial and industrial construction services through the expertise of our operating companies: Austin Bridge & Road, Austin Commercial and Austin Industrial. **Austin Bridge & Road** has an outstanding opportunity for a **Carpenter Foreman** at our large heavy civil project in **San Antonio, Texas.** The Carpenter Foreman supervises and coordinates skilled and unskilled workers on carpentry-related tasks, such as building forms for concrete, framing, and structural woodwork for construction projects. Responsibilities include ensuring work is completed safely, on schedule, and within specifications and costs, while maintaining effective communication with inspectors, developers, vendors, and subcontractors. **Responsibilities:** + Lead skilled and semi-skilled carpentry crews effectively. + Supervise and coordinate tasks such as building and assembling concrete forms, framing, and structural woodwork. + Manage equipment, tools, materials, and work crews to meet productivity, cost, and quality objectives. + Plan and execute "Look Ahead" schedules, Work Plans, and logistics related to carpentry tasks. + Ensure a safe, efficient, and high-quality carpentry work environment. + Inspect carpentry work for adherence to standards and tolerances, addressing issues promptly. + Coordinate QA/QC inspections for carpentry-related tasks to ensure project acceptance. + Maintain accurate daily reports and records for carpentry activities to ensure project success. **Qualifications:** + 5+ years of experience leading carpentry crews on heavy civil projects, with a focus on wall construction. + Skilled in reading and interpreting construction plans specific to carpentry tasks. + Strong organizational skills with keen attention to detail in carpentry operations. + Experienced in logistics planning, scheduling, and managing carpentry materials. + Dedicated to maintaining a safe work environment and enforcing jobsite safety practices. + Flexible and capable of working night shifts and extended schedules as needed. + Effective communicator with a collaborative, team-oriented mindset. **Requirements:** + High School Diploma/GED or higher + Valid driver's license + Requires working outdoors at times in the rain or snow and during cold, warm, and hot temperatures + Must be able to work on call as needed + Applicants must be legally authorized to work for ANY employer in the United States. Austin Bridge & Road is unable to sponsor or take over sponsorship of an employment visa for this position. **Benefits & Compensation** We offer excellent benefits including medical, dental, life and disability insurance, and a matching 401K plan. **We are proud to be a 100% Employee-Owned Company (ESOP)!** To learn more about our employee-ownership structure, please go to ********************************************************* . **Austin Bridge & Road is an Equal Opportunity Employer.** _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . _See_ the "Pay Transparency Nondiscrimination Provision" poster available in English (*********************************************************************************************** and Spanish (*************************************************************************************************** . **About Austin Bridge and Road** A leader in the heavy highway and transportation industry for more than 100 years, Austin Bridge & Road delivers asphalt and concrete services, and builds landmark projects such as complex highway interchanges, tollways, runways, bridges, rail projects, and water/wastewater facilities. To learn more about us, visit ************************************************* . **No Third-Party Inquiries Please** This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). Any unsolicited resumes or candidate information submitted to this Company or any of its employee-owners becomes the property of the Company. **Accessibility Note** If you are a job seeker with a disability and require a reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.**

SUMMARY Journeyman - Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. * Performs minor maintenance or cleaning activities with tools and equipment. * Ability to tie rebar. * Operation of electric and pneumatic tools. * May rig materials. * Responsible for observing and complying with all safety and project rules. Performs other duties as required.

CROSSAPPRENTICE CARPENTER SCHEDULED DAYS/HOURS: Monday-Friday, 7:30 AM - 4:00 PM REPORTS TO: Master Carpenter SALARY: Based on experience GENERAL SUMMARY: Possesses work site experience and basic knowledge of construction, including level, plumb & square, with a higher understanding and expectation of quality workmanship. Demonstrates work site etiquette and professional conduct on the project and in front of customers and vendors. Ready to begin learning the specifics of the craft, invest in their hand tools, and demonstrate an increase in abilities. RESPONSIBILITIES: SKILL LEVEL Loading a truck/trailer Stacking materials Proper rolling of extension cords Clean-up of the job site Setting up a ladder Jackhammering Digging Handling materials Demolition Setting up/taking down scaffolding Installing insulation Organize assigned tasks for completion alone or with supervision Present alternative solutions to unforeseen obstacles and building conditions to the Master Carpenter or Project Manager Load dumpsters efficiently Maintain a clean and neat job site Assist in basic nailing of materials Assist other carpenters with more complicated tasks Learn tool and material terminology BASIC TOOL KNOW-HOW: Hand tools Drill, saw, Sawzall, and miter box Compound miter saw Read measuring tape CONSTRUCTION TASKS: Learn how to install aluminum, wood, or fiber cement exterior cladding Learn basic framing techniques and components Cut & install drywall Install soffit, fascia, and exterior trim components Install sheathing, roof decking, and subfloors Cut and install basic interior trim, including base, door/window casing, and quarter round Learn to assist with cabinet installation and crown mold details Learn and assist in door and window installation Prep wood for finishing (fill nail holes, caulk, sand) Prevent hazardous and unsafe working conditions Follow instructions for basic carpenter tasks WORK ENVIRONMENT: Must be able to talk, hear, stand, walk, climb, balance, stoop, kneel, crouch or crawl, reach with hands and arms, and use hands to grasp, handle, and/or feel Endure exposure to outdoor weather conditions and possible extreme temperatures, loud noise, fumes, and moving machinery Must be able to lift 80+ pounds, with or without assistance STANDARDS: POSITION SPECIFIC Review Task Lists in JobTread and check off the items upon completion Complete work within the estimated labor hours Add or comment on a daily log of work performed at the job site, summarizing what was accomplished and adding photos when available Create a material list before the end of the workday and submit it to the Project Manager, when appropriate Be accepting of continuous changes that will occur as the company grows and develops in the form of project type, project location, and the development of new company systems COMPANY-WIDE 1. Act and communicate with: Curiosity - ask questions and be receptive to answers Integrity - be honest, truthful, and accurate Respect - show regard and consideration for others Accountability - take responsibility and engage Humility - avoid vanity, arrogance, and excessive pride 2. Exemplify the CROSS Core Values 3. Prevent hazardous and unsafe working conditions

REPORTS TO: Foreman A skilled carpenter involved in high level millwork that can be woodwork, casework, and/or ornamental metalwork. Duties & Responsibilities * Installation of AWW, PL + Metal casework, fume hoods, Doors Frames and Hardware, misc. specialties. * Preplanning: tools needed, materials, installation techniques that is the fastest and safest way possible. Safety Responsibilities: * Responsible to follow and participate in the ISEC Safety Program and adhere to the ISEC Safety Promise. * Perform their jobs in the safest manner prescribed - Never put themselves in harm's way. * Conduct themselves in a way that enhances their personal safety and that of their coworkers contributing to a positive work environment. * Report workplace hazards and make suggestions for their control. Use Stop Work Authority and respect Stop Work Authority on job. * Cooperate and contribute toward the overall success of the safety program. * Report all injuries and incidents as soon as possible. Preferred Qualifications Education/Experience * Experience in casework, plastic laminate, and architectural millwork Knowledge/Skills * Ability to read blueprints * Supply personal tools * Ability to work with minimal supervision Minimum Qualifications Education/Experience * High School Education or Equivalent * 3-5 years experience as a finished carpenter * Union member where applicable Requirements: Workers should be able to: Physically, workers must be able to: Climb and maintain balance on ladders and scaffolds; Stoop, kneel, and crouch; Use hands and arms to reach for, handle, and manipulate objects; See well (either naturally or with correction); and lift and carry objects weighing up to 50 pounds.

VirtualStaffing360.com provides cutting-edge executive direct hire staffing solutions. Our clients offer a variety of compensation packages, benefits, and opportunities with flexible hours to best fit your needs. Whether you are searching for a healthcare, information technology, or accounting and finance career in your area or seeking to work within another State, such as a more rural setting, small city, or major metropolitan area. We have opportunities throughout the United States that may fit your lifestyle. Our direct hire staffing is free to our potential candidates for hire. Our headhunting services for potential candidates are free. Apply at https://virtualstaffing360.com/ careers section. We will assist in salary negotiating. We coordinate interviews. Our experienced support teams take care of every onboarding detail. Job Description · Perform various carpentry tasks including door hanging, fixture installation, caulking, plastering, metal stud framing, and construction painting. · Measure, mark, and cut drywall panels according to design plans. Fasten panels and tiles to support structures. · Patch, trim, and smooth rough spots and edges. Apply tape and sealing compound to cover joints between wall boards. · Installation of rough carpentry, framing, hanging of insulation and drywall, suspended ceiling systems, caulking, miscellaneous and drywall trim. · Install cabinets, counter tops, flooring, trim, and other carpentry components. · Ability to make repairs to doors, frames, walls, and ceilings. · Maintain positive working relationships with customers, contractors, suppliers and other employees. · Other activities, duties, and responsibilities as assigned. Display a high level of teamwork, integrity, commitment, and leadership in daily Requirements · Good communication skills, ability to work independently or as part of a team. · Physical stamina to perform manual labor for extended periods of time. · Adhere to safety protocols and maintain a clean and organized work area. · Proficient in using carpentry hand and power tools and equipment. · Measure, cut, and shape wood, plastic, fiberglass, and other materials according to specifications. · Inspect all tools and power tools before use to ensure they are in safe and working condition. · Ability to work independently with minimal supervision. Additional Information If you're ready for a fresh start, apply today! Please be advised, the specific market rate/range will be provided during the interview process. The annual rate of pay depends on job-related factors as permitted by applicable law, such as level of experience, geographic location where the work is performed, and/or seniority. Complete the application process on our company website at VirtualStaffing360.com Also, you may send your resume to cs@VirtualStaffing360.com for an expedited review of your credentials. Our client is an Equal Opportunity Employer, including disability and veterans.

Job Summary: The Civil Journeyman Carpenter is responsible for constructing, erecting, installing, and repairing structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools. This position requires knowledge of structural design, the ability to read blueprints, and simple layouts, as well as knowledge of construction trade practices, procedures, techniques, tools, and equipment. Duties and responsibilities: Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required. Shape or cut materials to specified measurements using hand tools, machines, or power saws. Follow established safety rules and regulations and maintain a safe and clean environment. Erect and destruct concrete forms, scaffolding, and ramps above ground level. Remove damaged or defective parts or sections of structures and repair or replace, using hand tools. Maintain records, document actions, and present written progress reports. Construct forms or chutes for pouring concrete. Verify trueness of structure, set grade, check for plumb, etc. Mix, transfer and extend materials such as concrete and asphalt. Fabricate and install concrete reinforcing bars. Place and finish concrete. Maintain clean job site, pick up tools/equipment, secure job site each day-eliminate potential hazards. Other duties as assigned. Requirements Essential qualifications: Experience - 3+ years of Journeyman level experience. Working conditions: This position involves working outdoors in all weather conditions, including extreme heat and cold. Must be willing to work overtime and weekends as required. Travel may be required for this position. Physical requirements: The employee is regularly required to sit, use hands to finger, handle, or feel, and reach with hands and arms. The employee is frequently required to stand, walk, climb or balance, stoop, kneel, crouch, or crawl, talk or hear, and taste or smell. The employee must regularly lift and/or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Palacios Marine & Industrial is an equal opportunity employer prohibiting discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by law. This policy applies to all employment practices, including hiring, promotion, termination, compensation, and training. Hiring decisions are based solely on qualifications, merit, and business needs.

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Plan, lay-out and perform all types of Carpentry work in accordance with all applicable plans, specifications, codes, and industry standards. Work in other crafts at levels appropriate to training and skills as requested by project supervision. Key Responsibilities 1. Eliminate WASTE such as waiting, rework, transporting, material storage and time. 2. High proficiency in all related trade mathematics. 3. Inspect subordinates work, ensure accuracy and compliance with plans and specifications, explain deficiencies and take any necessary corrective action. 4. Look for opportunities for improvement in all tasks, means and methods regarding the work and be willing to learn from others and continually seek opportunities to share knowledge and teach others. 5. Maintain positive working relationships with all members of the crew. 6. Produce high quality work, safely and productively at all times. 7. Provide feedback to ensure all materials, tools, equipment and information is available for the work. Minimum Job Requirements 1. Must be able to read and understand drawings, specifications, safety and quality standards and effectively utilize all trade tools and equipment relevant to the work. 2. Must have a minimum of one year (level I), two years (level 11), three years (level 111) and four years (Sr.) experience in the industrial/commercial construction industry and have an in-depth understanding of the carpentry trade. 3. Possess effective verbal and written communication skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Must be able to move in and around confined spaces and uneven areas. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will climb and maintain balance on steel/wood framework, stairs, ladders and scaffolds. 9. Will lift, push or pull objects up to 50Ibs. on an occasional basis 10. Work up to a 12 hour shift doing hard physical work in varying temperatures and outside conditions. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefits: Market Competitive Salary (paid weekly) Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting after 60 days of continuous employment Sick Leave and Paid Time Off (PTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

Full-time Description We are a leader in Millwork and Fixture Installations seeking experienced and enthusiastic working Lead Finish Carpenters who can perform in a diverse range of situations overseeing and installing fixtures, casework and millwork in commercial and retail environments. “We have traveling positions available. If you are looking for stability, outstanding compensation and want to work for a Leader in our Industry, please contact us now.” Requirements Education: High School Diploma or Equivalent Experience: Five (5) years fixture installation and retail or commercial finish carpentry experience. One (1) year minimum supervisory experience. Certification(s): OSHA10 or 30, Forklift, aerial lift (Company will provide if necessary). Technology: Able to download and use APPS on phone and mobile devices. Able to make electronic submissions though company portal. Physical Demands: Ability to walk and stand for long periods of time, climb ladders, work from an aerial lift. Frequent bending, kneeling, twisting and squatting. Work with materials over your head for short durations. Able to lift and carry objects weighing up to 50 lbs. regularly. CONDITIONS OF EMPLOYMENT Must be able to pass a Drug Screening, Criminal Background Check and MVR screening for approved driving status. Must be able to complete a Company Sponsored CPR/First Aid Training course online. Available to work overtime as needed. Our typical workweek is 40 to 60 hours. Be flexible to work non-conventional shifts when required (some overnight projects may occur). Able to travel and be away from home for durations from 2-8 weeks depending on our contract. Must provide own basic hand tools and cordless drill. COMPENSATION AND BENEFITS PACKAGE Company provides Health, Dental and Life Insurance, Long term Disability Plan, 401k, Reimbursement for travel expenses, Travel Perks, Referral Bonuses. Top pay based on experience. KEY RESPONSIBILITIES AND SKILL REQUIREMENTS · Able to complete onsite millwork, cabinet and countertop, fixture, graphic and décor installs in commercial and retail environments. · Personnel management of various crew sizes ranging from 3-6 employees or larger projects of 8 or more employees. · Able to receive, stage and manage large inventory of millwork and fixture parts for distribution and installation. · Able to evaluate site conditions, construction and delivery schedules and when these factors are not aligned, clearly and effectively communicate to Project Management Team, onsite contractor or when necessary, our client. · Able to establish and understand layouts for millwork, fixtures and other elements. · Must always represent the company in a professional manner. Adopt and embrace our company Core Values. · Report time sheets, expense reports, daily reports and progress photos electronically. Generate additional work validations as required when non-contract scope is required. · Perform all tasks of a finish carpenter including installation of cabinets, countertops, standing and running trim (base, chair rail, crown moldings, door and window casings), scribing, coping, installing wall panel systems, retail fixtures etc. · Ability to manage and motivate others while maintaining professionalism. · Able to professionally interact with clients, general contractors and other sub-contractors. · Strong working knowledge of woodworking hand and power tools. · Strong working knowledge and understanding of architectural drawings, shop drawings and fixturing floorplans. · Must have a strong commitment to job site safety including always maintaining a clean jobsite. “OUR CORE VALUES DRIVE EVERY DECISION AND ARE INTERWOVEN INTO EVERYTHING WE DO” We lead the pack. We are fair, honest and respectful in every interaction. We got your back. We support and encourage doing what's right, even when it's not easy We have fun. We inspire, have passion, and create fun in all that we do. We get it done. We are driven to hold ourselves accountable in making “yes” happen. Salary Description $27.00 to $39.00 hourly based on experience

Carpenter Apprentice JobID: 3740 Trades/Skilled Trades/Carpenter Apprentice Additional Information: Show/Hide Job Title: Carpenter Apprentice Reports To: Carpenter FLSA Status: Non-exempt Assists carpenter in constructing, erecting, installing, and repairing structures and fixtures of wood, plywood, and wallboard. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Gathers tools and supplies to be used at work site. Maintains tools and equipment and keeps supplies and parts in order. Cleans work area, machines, tools, and equipment. Performs other routine duties. Performs other duties as may be assigned by the Lead Carpenter, Carpenters, or Plant Services Supervisor. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED). Experience in carpentry service preferred. LANGUAGE SKILLS: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. MATHEMATICAL SKILLS: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. REASONING ABILITY: Ability to learn carpentry technical information. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. CERTIFICATES, LICENSES, REGISTRATIONS: Possess current driver's license. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; use hands to finger, handle, or feel; and reach with hands and arms. The employee is occasionally required to walk; sit; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to outside weather conditions. The employee is occasionally exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually moderate. Revised Date: November 2, 2015 The foregoing statements describe the general purpose and responsibilities assigned to this job and are not an exhaustive list of all responsibilities, duties, and skills that may be required.

**Job Description: Civil Carpenter, Industrial Journeyman** **Summary** Construct, erect, install, and repair structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools. This is accomplished by performing the following essential duties and responsibilities. Other duties may be assigned. Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required. + Shape or cut materials to specified measurements, using hand tools, machines, or power saws. + Follow established safety rules and regulations and maintain a safe and clean environment. + Build or repair cabinets, doors, frameworks, floors, or other wooden fixtures used in buildings, using woodworking machines, carpenter's hand tools, or power tools. + Remove damaged or defective parts or sections of structures and repair or replace, using hand tools. + Maintain records, document actions, and present written progress reports. + Erect scaffolding or ladders for assembling structures above ground level. + Construct forms or chutes for pouring concrete. **Supervisory Responsibilities -** May directly supervise 1 to 5 carpenter helpers in the Operations Department. Carries out supervisory responsibilities in accordance with the Austin Industrial's policies & procedures and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems. **Competencies -** To perform the job successfully, an individual should demonstrate the following competencies : + Problem Solving - Identifies and resolves problems in a timely manner; gathers and analyzes information skillfully; develops alternative solutions; works well in group problem solving situations; uses reason even when dealing with emotional topics. + Project Management - Completes projects on time and budget. + Technical Skills - Assesses own strengths and weaknesses; pursues training and development opportunities; strives to continuously build knowledge and skills; shares expertise with others. + Customer Service - Manages difficult or emotional customer situations; responds promptly to customer needs; meets commitments. + Interpersonal Skills - Focuses on solving conflict, not blaming; listens to others without interrupting; keeps emotions under control. + Oral Communication - Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; responds well to questions. + Written Communication - Writes clearly and informatively; able to read and interpret written information. + Teamwork - Balances team and individual responsibilities; exhibits objectivity and openness to others' views; gives and welcomes feedback; Contributes to building a positive team spirit; establishes and maintains constructive working relationships; puts success of team above own interests; able to build morale and group commitments to goals and objectives; supports everyone's efforts to succeed. + Visionary Leadership - Displays passion and optimism; inspires respect and trust. + Change Management - Builds commitment and overcomes resistance; monitors transition and evaluates results. + Leadership - Exhibits confidence in self and others; inspires and motivates others to perform well; effectively influences actions and opinions of others; accepts feedback from others; gives appropriate recognition to others. + Quality Management - Looks for ways to improve and promote quality; demonstrates accuracy and thoroughness. + Cost Consciousness - Works within approved budget; develops and implements cost saving measures; contributes to profits and revenue; conserves organizational resources. + Diversity - Shows respect and sensitivity for cultural differences; promotes a harassment-free environment. + Ethics - Treats people with respect; Keeps commitments; inspires the trust of others; works with integrity and ethically; upholds organizational values. + Organizational Support - Follows policies and procedures; supports organization's goals and values. + Judgment - Displays willingness to make decisions; exhibits sound and accurate judgment; includes appropriate people in decision-making process; makes timely decisions. + Motivation - Measures self against standard of excellence. + Planning/Organizing - Prioritizes and plans work activities; uses time efficiently; sets goals and objectives. + Professionalism - Approaches others in a tactful manner; reacts well under pressure; treats others with respect and consideration regardless of their status or position; accepts responsibility for own actions; follows through on commitments. + Quality - Demonstrates accuracy and thoroughness; looks for ways to improve and promote quality; applies feedback to improve performance; monitors own work to ensure quality. + Quantity - Meets productivity standards; completes work in timely manner; strives to increase productivity; works quickly. + Safety and Security - Observes safety and security procedures; determines appropriate action beyond guidelines; reports potentially unsafe conditions; uses equipment and materials properly. + Adaptability - Adapts to changes in the work environment; changes approach or method to best fit the situation; able to deal with frequent change, delays, or unexpected events. + Attendance/Punctuality - Is consistently at work and on time; ensures work responsibilities are covered when absent; arrives at meetings and appointments on time. + Dependability - Follows instructions, responds to management direction; takes responsibility for own actions; keeps commitments; commits to long hours of work when necessary to reach goals; completes tasks on time or notifies appropriate person with an alternate plan. + Initiative - Volunteers readily; undertakes self-development activities; seeks increased responsibilities; looks for and takes advantage of opportunities; asks for and offers help when needed. **Qualifications -** To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Education and/or Experience -** High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of education and experience. **Language Skills -** Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. **Mathematical Skills -** Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. **Reasoning Ability -** Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations **Computer Skills -** Computer skills are not required for this position. **Other Skills and Abilities -** For safety reasons, it is imperative that the employee be able to read and speak fluent English. + **Physical Demands** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. + While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must regularly lift and /or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. + **Work Environment** The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. + While performing the duties of this job, the employee is regularly exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions and vibration. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment is usually loud. **Austin Industrial is an Equal Opportunity Employer.** + _See_ the "Know Your Rights" poster available in English (****************************************************************************************** and Spanish (******************************************************************************************** . + _See_ the "Pay Transparency Nondiscrimination Provision" poster available in English (*********************************************************************************************** and Spanish (*************************************************************************************************** . **No Third-Party Inquiries Please** + This Company does not accept and will not consider unsolicited resumes or any other unsolicited candidate information submitted to the Company or any of its employee-owners by staffing agencies, search firms, or third-party recruiters in response to a posted vacancy. The Company will not pay any placement fee(s) without a written agreement to do so ( _i.e._ , payment must be required pursuant to the terms of a written agreement). **Accessibility Note** + If you are a job seeker with a disability and require reasonable accommodation to apply for one of our jobs or have accessibility concerns, please contact the **People Services Team** at ****************.** **Qualifications** **Education** **Preferred** + High School or better **Experience** **Required** + 3-5 years: Industrial experience

Responsibilities Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. Selects, loads, and hauls job material to work site. Prepares layout of form or fixture to be fabricated using lines or grades. Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes Qualifications ypically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently.

SUMMARY Helpers (includes helpers 0 months- helper 42 months) - Preferred minimum of 6 months documented field experience in chosen craft discipline. Must have the ability to read and interpret instructions and documentation. The level and degree of job responsibilities and requirements vary depending on months of experience and assigned job step. Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways.

Job Summary: The Civil Journeyman Carpenter is responsible for constructing, erecting, installing, and repairing structures and fixtures of wood, plywood, and wallboard, using carpenter's hand tools and power tools. This position requires knowledge of structural design, the ability to read blueprints, and simple layouts, as well as knowledge of construction trade practices, procedures, techniques, tools, and equipment. Duties and responsibilities: * Study specifications in blueprints, sketches, or building plans to prepare project layout and determine dimensions and materials required. * Shape or cut materials to specified measurements using hand tools, machines, or power saws. * Follow established safety rules and regulations and maintain a safe and clean environment. * Erect and destruct concrete forms, scaffolding, and ramps above ground level. * Remove damaged or defective parts or sections of structures and repair or replace, using hand tools. * Maintain records, document actions, and present written progress reports. * Construct forms or chutes for pouring concrete. * Verify trueness of structure, set grade, check for plumb, etc. * Mix, transfer and extend materials such as concrete and asphalt. * Fabricate and install concrete reinforcing bars. * Place and finish concrete. * Maintain clean job site, pick up tools/equipment, secure job site each day-eliminate potential hazards. * Other duties as assigned. Requirements Essential qualifications: * Experience - 3+ years of Journeyman level experience. Working conditions: * This position involves working outdoors in all weather conditions, including extreme heat and cold. * Must be willing to work overtime and weekends as required. * Travel may be required for this position. Physical requirements: * The employee is regularly required to sit, use hands to finger, handle, or feel, and reach with hands and arms. * The employee is frequently required to stand, walk, climb or balance, stoop, kneel, crouch, or crawl, talk or hear, and taste or smell. * The employee must regularly lift and/or move up to 25 pounds and may frequently lift and/or move up to 50 pounds. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Palacios Marine & Industrial is an equal opportunity employer prohibiting discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by law. This policy applies to all employment practices, including hiring, promotion, termination, compensation, and training. Hiring decisions are based solely on qualifications, merit, and business needs.

SUMMARY Journeyman * Typically 3 years and above documented field experience in chosen craft discipline with ability to read and interpret instructions and document, plan and perform work activities independently. * Constructs, fabricates, installs and dismantles form work of fixtures of metal, wood and other accessories. RESPONSIBILITES: * Builds wooded structures, such as stairs, concrete forms, scaffolds, tunnel and sewer supports, and temporary frame shelters, according to blueprints, or oral instructions, and lays out and installs partitions and cabinet work. * Examines blueprints, sketches or building plans for to determine material required and dimensions of structure or fixture to be fabricated. * Selects, loads, and hauls job material to work site. * Prepares layout of form or fixture to be fabricated using lines or grades. * Measures boards, timbers, or plywood using square, measuring tape and ruler and marks cutting lines on materials using pencil and scriber. Shapes materials to required sizes using saws, chisels, and planes. * Verifies accuracy of structure with transit, plumb bob, square and level. * Uses carpentry hand tools such as hammers, levels, squares, screw drivers, adjustable, wrenches, hand and power saws, drill motors and pry bars. * Nails cleats (braces) across boards to construct concrete-supporting forms. * Braces forms in place with timbers, tie rods, and anchor bolts for use in building concrete piers, footings, and walls. * Erects frame work for structures and lays sub-flooring. * Cuts and assembles timbers to build trestles and cofferdams. * Erects scaffolding for buildings and other structures and installs ladders, handrails, walkways, platforms, and gangways. * Constructs forms, chutes, and aligns form panels for pouring concrete and grout. * Fits and installs pre-fabricated window frames, doors, weather stripping interior and exterior trim and finished hardware. * Fits and nails sheathing on outer walls and roofs of buildings. Sets and braces anchor bolts. * Performs minor maintenance or cleaning activities with tools and equipment. * Ability to tie rebar. * Operation of electric and pneumatic tools. * May rig materials. * Responsible for observing and complying with all safety and project rules. * Performs other duties as required.