Assembly Technician Jobs in South Windsor, CT

Essential Duties and Responsibilities: List what the person must do to perform the job to meet standards: Assembles and packs required components to produce a variety of heating systems Inspects assembled components and systems for overall quality, proper appearance and conformance to requirements Identifies and records specific products for further production requirements Reports any defective materials, components, off-quality finishes and unusual situations to supervisor Operates and maintains lift and platform trucks to move materials and products Utilizes and maintains hand and air tools, electrical and air testing equipment, rivet guns, carton staplers, utility knives, tape measures and other necessary production tools Monitors and maintains safe work areas and reports any unsafe equipment, materials or practices to supervisor Performs similar or related duties as requested or required Requirements Position Requirements: The Assembler must possess the minimum knowledge listed below: Prior manufacturing experience a plus Ability to read, write and follow both written and verbal work orders Strong communication skills Familiarity with hand and air tools, measuring instruments, packing tools and palletizing equipment Operate hoists, hand trucks and platform trucks as necessary Capability of lifting 50 pounds unassisted Capability to lift 50 to 100 pounds intermittently in a team lift situation Ability to do repetitive bending, reaching, stretching, lifting and twisting

Responsibilities * Procedures are standardized to a small degree. * The operations are of medium to complex difficulty. * Perform necessary tasks to complete work assignments in a timely fashion. * Tasks include but not limited to assemble components, inspect components and assemblies, fit components ,calibrate, test, oil flush and safety wire, minor machine operations (e.g. bearing lapping machine), disassembly, solder to defined standards, evaluate, rework, replace components, and repair as necessary. * Perform a limited range of machine operations to work parts as required (e.g. seal face rework). * Inspection operations include visual checks for damage to surfaces, missing parts, damaged parts, finish and dimensional checks for size, fit and finish, including the use of micrometers, calipers, functional gages and depth gages. * Assist and support engineers when required. * Communicate information and complete documentation. * Work instructions, documentation, and specifications range to complex. * A wide variety of tools and gages are used. * Train others as necessary. Qualifications * High School Diploma * Previous experience in a manufacturing environment Our Vision: As one team, we enable the safety and prosperity of the world. Our Mission: We partner with our Customers to TRIUMPH over their hardest aerospace, defense, and industrial challenges to deliver value to our stakeholders. Our Values: * Integrity - Do the right thing for our stakeholders. We value safety, diversity, and respect. * Teamwork - Win as One team-one company. Solicit help and assist others. * Continuous Improvement - Pursue zero defect quality. Attack problems and relentlessly raise the bar. * Innovation - Passion for growing the business. Lead through ingenuity and entrepreneurship. * Act with Velocity - Partner, anticipate and communicate. Proactively solve problems. Code of Conduct: To perform the job successfully, an individual should demonstrate the TRIUMPH behaviors captured within our core values: Integrity, Teamwork, Continuous Improvement, Innovation, and Act with Velocity. Detailed definitions are below and performance metrics for each behavior can be found on our intranet and is embedded within our Performance Management processes. All employees are expected to represent the values and maintain the standards contained in TRIUMPH's Code of Conduct. Environmental, Health, and Safety (EHS): Employees are responsible for the Health, Safety, and Welfare of themselves, the environment, and other people. All employees must comply with EHS policy training and instructions, help to maintain a safe and clean working environment, and use any Personal Protective Equipment (PPE) provided by the Company. Employees must report any accidents, incidents, and near misses to management. Additionally, employees are expected to notify management of any dangerous or potentially dangerous situations or practices. Additional Information: Triumph is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. Pursuant to International Traffic Arms Regulations ("ITAR") and the Export Administration Regulations ("EAR"), applicants for SELECT US positions will be required to provide proof of U.S. Citizenship, U.S. Permanent Residence, or U.S. Immigration Status in order to meet the minimum qualifications for those select positions. All inquiries related to citizenship are asked solely to comply with ITAR and EAR export licensing requirements. U.S. applicants must be legally authorized to work in the United States without company sponsorship. Please contact us if you require assistance in applying for TRIUMPH and we will provide reasonable accommodations via *****************************.

Hamilton Connections is looking for an assembly/soldering associate for a manufacturing company in Branford, CT. Qualifications: Ability to assemble cable harnesses Need to be able to read blueprints/assembly drawings Experience using various hand tools Ability to solder with a soldering iron a plus Requirements: Able to pass a pre-employment criminal background check Authorized to work in the US Details: Monday thought Friday 8am to 4pm Pay range $17-$18 Possible temp to hire opportunity Please apply or call ************ for more information.

Essential Duties & Responsibilities: Bond and assemble aerospace components according to blueprints and specifications, using hand tools, power tools, and equipment. Responsible for reading process charts, work orders, and specifications to determine sequence of bonding operations, the amount of bonding agent to be applied, and areas to be bonded. Ensure inventory of hardware and supplies are maintained and accounted for. Ensure all equipment used for assembly is in proper working order. Complete Daily Check List Complete and retain all applicable inspection data sheets. Ensure that parts are complete and ready for over inspection: EX: Thickness, touch up, cleanliness, routers complete, etc. Daily check of liquid Nitrogen Ensure Assembly tools are accounted for and secured daily. Company Benefits: Medical, Dental, Vision, Long term Disability, 401(K)-3% Match, Holiday Pay COMPENSATION RANGE: $19.50.00 to 20.50 hourly

The Role As a Production Tech, you'll be an essential part of the process of turning raw cannabis flower into our beautiful line of medicated products. Under the guidance of the management team, you will produce, package, and handle products, perform inventory duties, adhere to compliance requirements, and keep safety as your top priority while working daily in our facility. Here at GTI, we are looking for true team players who are the perfect hybrid between precision and energy. Responsibilities * Deliver on production goals, while focused on safety and quality * Produce product per recipes and SOP's, maintaining high quality standards * Package product into proper containers with proper labeling to ensure compliance with state regulations * Ensure all standards for processing procedures and laboratory protocols are followed * Compliance with local and state regulations * Adherence to quality control methods throughout entire process * Documentation of manufacturing methods are created and maintained * Electronically convert packaged products in the state traceability system * Manage time efficiently to meet goals while consistently producing quality product * Practice good housekeeping habits throughout the facility with focus and personal contributions towards a clean and organized assigned work area at the end of the assigned shift * Exhibit competency in basic organizational skills, communication skills and Windows based operating software * Use independent judgment regarding product processing, keeping quality and goals in mind * Help create a positive environment by having a positive attitude and by being self-motivated * Other duties as assigned Qualifications * High School Education or GED graduate; some college or college graduate preferred * 1-2 years' experience in manufacturing, food processing, warehousing, and/or inventory preferred * Equivalent combinations of education and experience may be considered * Must be able to work well in a group and independently; demonstrate self-motivation and initiative * Must be able to adapt quickly to changes in policy, procedure, and technique * Employee must exhibit personal hygiene and follow the health guidelines set forth by GTI * Ability to listen well and communicate effectively with various audiences * Ability to perform monotonous tasks with great efficiency without losing qualities * Must be able to follow basic instructions and accept constructive criticism Additional Requirements * Must have a valid driver's license or State ID card * Must be a minimum of 21 years of age * Must pass all required background checks * Must be and remain compliant with all legal and company regulations for working in the industry * Must be approved by the Cannabis Compliance Board to receive an Agent Card Working Conditions * While performing the duties of this job, the employee is regularly required to perform reaching, grasping, bending, stooping, talking, hearing, seeing and repetitive motions. * Must be able to sit and/or stand for extended periods of time while maintaining focus. * PHYSICAL DEMANDS: Must be able to lift, carry, and balance up to 50 pounds AND must be able to do so with extreme care and caution when working with product. * Work involves daily exposure to allergens (such as cannabis, tree nuts, and coconut oil).

What Assembly contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Performs a variety of tasks ranging from repetitive to non-repetitive production to put together component parts to make assemblies, sub-assemblies or completed units, using standard operating procedures. May conduct quality inspections on processing line in accordance with quality specifications. Job Summary The Associate I, Assembly plays a key role in the assembly process of products including the verification of components and compliance with quantity and quality standards. The Associate I, Assembly conducts quality inspections on the assembly line in accordance with quality specifications, reports defects and investigates the route cause. This job operates equipment that packages materials or products by inserting them into containers or filling containers from spouts or chutes. The Associate I, Assembly tasks are performed in accordance with applicable safety guidelines, as well as appropriate processing standards. Responsibilities Sets up workstations as directed by Captain/Designee while complying with all GMP's, policies, procedures, and safety rules. Assembles product packages per DHR, special instructions, and video imaging. Verifies components in the assembly process to ensure proper selection and that quality and quantity standards are met. Inspects components for debris, and or any other potential quality defect and reports defects as needed to management and the quality team. Performs duties in compliance with all safety rules and regulations required by the Company, Local, and State and Federal provisions. Complies with the NCI & Defect Investigation Form process to ensure proper management and resolution of quality issues. Qualifications 0-1 years of experience preferred. Eligible to convert to full time employee from contracted work. High School Diploma or GED preferred. Has met hours for contract conversion with Cardinal Health. What is expected of you and others at this level Applies basic skills and techniques to complete routine tasks within assigned area Maintains appropriate licenses, training and certifications Works on basic and routine assignments Works within clearly defined Standard Operating Procedures and/or scientific methods Adheres to all quality guidelines Works under close supervision All work is reviewed for accuracy Any deviations from the norm are approved by the supervisor before proceeding Pay rate: $16.35 per hour Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 3/30/2025 *if interested in opportunity, please submit application as soon as possible. Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

Job Type: Full-Time; Non-Exempt Shift: Monday-Friday, 6:00am-2:30pm Hourly Rate: $17.00/hr. Who You Are: As a Production Technician, you will be responsible for the packaging and labeling of the finished goods at our cultivation and manufacturing centers. You will be responsible for the production of a variety of finished products including packaged, dried flower, pre-rolls, vape cartridges and vape pens, and infused products. Our production team is expected to maintain quality control measures to ensure high-quality products and will carry out day-to-day tasks including prepping, packaging, and labeling per standard operating procedures set by Curaleaf and our production management. What You Will Do: * Stage product and packaging supplies across various production lines to meet daily production schedule * Perform quality assurance protocols as designated by Curaleaf's procedures * Increase operational efficiency and reduce waste through ownership, teamwork, communication and collaboration * Perform in-process and post-process quality assurance, testing and conducting visual inspections to ensure all product meets or exceed Curaleaf's specifications and patient's expectations * Ensure 100% compliance involving proper weighing, data recording, product tracking and security throughout the entire packaging process * Operate in an efficient manner that also complies with all OSHA regulations, Curaleaf SOP's and all applicable required procedures * Ensure each product is properly labeled in compliance with state regulations * Work in a quick and efficient manner and strive to consistently increase productivity * Maintain the organization and cleanliness of the extraction room while performing all duties What You Will Bring: * High School Diploma or G.E.D minimum * Effective communication skills working in a team-based environment * Strong attention to detail skills working in a high-volume production environment * Strong work ethic and the ability to be punctual, reliable, and contribute to a positive, professional work environment * Ability to be trained on various production equipment, SOPs, and consistently meet performance expectations set by leadership * Ability to perform repetitive tasks for long periods of time Even Better If: * You have one year of manufacturing and packaging experience with a focus on ensuring product safety, consumer safety and satisfaction, and high product quality is strongly preferred Physical Requirements: * Allergen warnings, potential exposure to dust, pollen, and plant pathogens. * Exposure to cleaning solvents, such as high volumes of isopropyl alcohol. * Daily use of provided PPE, such as masks, hair nets, beard covers, respirators, boot covers, scrubs, non-slip shoes, and Tyvek suits as necessary. * Ability to work in confined spaces * Exposure to loud noises, including but not limited to air compressors, packaging equipment, and alarms. * Exposure to CO2 manufacturing procedures at OSHA approved CO2 levels. * High-stress tolerance, adaptable, flexible ability to work in an ever-changing environment

Through the direction of the Team Leader or Lead Person this individual is responsible for properly performing the match operation required for proper assembly. The majority of products involve hand assembly but must be able to operate other various assembly equipment in the department. Must be able to obtain certain information from a blueprint. This employee must frequently use various measuring devices to accurately maintain proper sizes and tolerances. Most work is repetitive in nature and follows routing, prescribed methods but some skill and judgment is involved in selecting correct sizes. This individual is also responsible for the movement of material, product or components to and/or from other productions areas. This individual is responsible for minimizing scrap and rework, maintaining accurate production records and quickly identifying issues that may prohibit production and reporting those issues to the Lead or their Team Leader. The work areas must be kept clean and neat; and may be assigned simply, routing preventive maintenance of equipment. Attendance at work is an essential function of the position. RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion.

About UFP MedTech: UFP Technologies is a designer and custom manufacturer of comprehensive solutions for medical devices, sterile packaging, and other highly engineered custom products. UFP is an important link in the medical device supply chain and a valued outsource partner to most of the top medical device manufacturers in the world. The Company's single-use and single-patient devices and components are used in a wide range of medical devices and packaging for minimally invasive surgery, infection prevention, wound care, wearables, orthopedic soft goods, and orthopedic implants. UFP Technologies, Inc. offers a competitive benefits package, including but not limited to: * Medical, Dental, Vision, Life, Disability Insurance * 401K with a matching contribution * Paid time off, Paid holidays, Employee discounts and much more! Location: This position will be on-site full-time in Chicopee, MA. The position holder will need to be within commuting distance (within 45 min). Qualified applicants must be eligible to work in the United States to be considered for this opportunity. Employment based visa sponsorship (including H01B sponsorship) is not available for this position. Production Technician Summary: The Production Technician performs a variety of duties in support of new and existing product development or manufacture by making prototypes, pre-production or production parts and assisting in process development. May be responsible for developing manufacturing methods for new parts; making concept samples and assisting production with process problems on jobs. Also responsible for the steel rule die database, die layouts and ordering new dies and die repair. Production Technician Essential Duties and Responsibilities: * Works with technical staff on projects related to product development, process development or manufacturing support, depending on the work area of the job. * Performs laboratory work involving sample preparation and testing. * Makes accurate measurements, records and reports data, including performing part inspection using various hand and automatic inspection tools. * Uses experience and knowledge to assist the estimating department in quoting new jobs / products. * Makes proof of concept and pre-production parts samples per customer request. * Reads and understands design drawings and translates drawings into parts or samples as required. * Submits all necessary paperwork properly and prepares reports. * Operates all applicable foamed, rigid and plastic converting manufacturing, tooling and testing equipment to make parts / perform tests as required. Manufacturing equipment includes but is not limited to vacuum former, RF welder, D-1 slicer, clicker dies, band saws, routers and compression molding equipment. Makes blade dies as required to support prototype and production fabrication. * Maintains a safe and orderly work environment. * Assists with production and pre-production validation activities. * Performs all other duties as assigned or needed. Production Technician Qualification Requirements: * High School, GED or Vocational School along with advanced course work and 2-3 years of production manufacturing and manual controlled machines. Experience working with rigid and plastic materials, packaging and foam materials preferred. * Good written and verbal communication skills with ability to follow instructions. * Knowledge of basic trade mathematics, basic computer skills, and ability to read and work from blueprints in 2D and 3D. * Proficient with inspection and measuring equipment. * May be required to travel for work / job related business. To apply for this job please create a profile with us through our online application system. Click the "Apply" box in the upper right-hand corner to start the application process. Or, if you already have a social media account with LinkedIn, Google, or Facebook you can use your log in credentials to apply. For more information on UFP MedTech, visit ******************* UFP Technologies, Inc. is an Equal Opportunity/Affirmative Action employer Minorities/Women/Veterans/Disabled. #UFP #MEDTECH #CHIC #IND

Are you looking for a new and exciting opportunity to use your skills in a successful and growing company? If you have the desire to work in an energetic, collaborative environment and you are looking for long-term growth then check out this opportunity at Bausch+Stroebel Machine Company, Inc. Bausch+Ströbel is a trusted and experienced supplier to the pharmaceutical industry specializing in filling and packaging systems. B+S filling and packaging lines are used worldwide to fill syringes, vials, cartridges, and ampoules with high-grade liquid and powder pharmaceutical products. Applications range from cleaning and sterilization to labeling and syringe assembly. In addition to designing and building systems tailored to customer specifications, Bausch+Ströbel provides a wide range of specialized services aimed at ensuring system reliability and productivity. Our goal: Providing the best technical and economical answers to the challenges presented by the world market. With this clear goal in mind, we are designing and manufacturing packaging equipment for the pharmaceutical and allied industries. From modest beginnings more than 50 years ago - with a staff of only four - Bausch+Ströbel has developed into an international enterprise. It is now one of the leading manufacturers in pharmaceutical packaging equipment. We are striving to create optimal solutions for our customers. To achieve this aim, we are continually making innovations to improve products and processes. Job Description This role will install and test electrical components for B+S packaging machines (filling, closing) and control cabinets. Primarily in-house with occasional travel. Essential Duties and Responsibilities: Perform electrical wiring and installation on pharmaceutical packaging machines and control cabinets Run and document the hardware test Processing of the electrical safety test according to UL regulations Creating electrical documentation Competencies: Demonstrates persistence, good foresight, and strong analytical thinking skills that allow troubleshooting, overcoming obstacles, and implementing solutions. Ability to work in a team environment. Maintain a neat and orderly work environment. Capacity to work simultaneously on various projects FLSA Status: Non-exempt position - Non-exempt employees will receive overtime pay at 1.5 times the calculated hourly rate for time worked more than 40 hours per week. Qualifications Ability to interpret drawings, diagrams, and machine specifications. Strong knowledge of manufacturing processes is preferred. Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Good understanding of cGMP requirements, change control, and gown qualifications. Good health and physical ability are necessary to enter aseptic clean rooms. Travel to North American customer sites, complete background checks, drug, alcohol, and safety testing per individual client requirements Must possess and maintain a current, valid Driver's License Strong attention to detail Education and/or Experience: Completed training or an apprenticeship as a mechatronics or electro mechanical technician, electronics technician for automation technology, control cabinet builder, electrical installer or comparable knowledge and skills or Associate's degree in technology field, e.g., electrical, electronics, etc. 3+ years of relevant experience in the field of control cabinet construction and plant installation desirable Additional Information Benefits: We offer medical and dental plans (the company pays 83% of the premium for employees and eligible dependents); company-sponsored health reimbursement accounts (HRA); Flexible Spending Accounts (FSA) for medical and/or dependent care, company-paid short-term and long-term disability plans, company-paid life insurance and AD&D plan; voluntary vision plan; voluntary pet insurance; voluntary identity theft protection plans; voluntary life, and dependent life plans at discounted group rates; a 401k retirement plan with a 4% company match, company paid holidays and generous a PTO plan. Should you meet the above requirements and qualifications and feel like this position seems like a perfect fit for you, please submit your resume along with a cover letter including your salary expectations. Bausch+Stroebel's US Headquarters is located in Branford, CT ******************************* Bausch+Stroebel is an Equal Opportunity Employer. Bausch+Stroebel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, transfer, leaves of absence, compensation, and training. m/f/d

Fiber Components and Sensor Assembly Business Unit in East Granby CT has a need for a TEMPORARY Assembly Technician to support the business. We are looking for an energetic and motivated person which will be challenged in manufacturing working with state-of-the art fiber assembly technology.DURATION: 6-8 weeks with possible extension Primary Duties & Responsibilities Work per standard operation procedures Document the manufacturing process as required Inspect parts/assemblies under microscope Perform basic equipment maintenance & calibration Troubleshoot equipment as needed Complete rework on assemblies and/or systems as a result of testing Assist recommending solutions to technical problems May assist in the selection and set-up of specialized test equipment Assist engineers as needed Cross-training in other areas as needed Education & Experience High school diploma or equivalent Previous experience or practice executing delicate tasks with small, fragile parts Computer literacy including data entry in Excel Ability to see details at close range Excellent hand to eye coordination The job requires access to defense articles and related technical data subject to the International Traffic and Arms Regulations (“ITAR”) 22 C.F.R. §§ 120-130. Therefore applicants must be U.S. persons as the term is defined in ITAR § 120.15

Job Details Position Type: Full time, 40h/week. OT as business needs dictate FLSA Classification : Non- exempt (hourly) Salary Range: $16.50/ hour paid weekly . The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. Reports to : Production Manager Company description: Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 15 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: The Assembler will assemble manufactured products and pack according to specifications. Essential Functions: Accountable for daily assembly in Production Tasks: Assembles metal products according to directions. Reads blueprints or similar documentation then builds to those specifications. Uses various machines and hand tools to accomplish assigned tasks. Maintains logs, records, and reports concerning production, machine maintenance, and product inconsistencies. Inventories tools, parts, and supplies; contacts materials handler if supplies are needed. Periodically checks products per company policy to ensure quality and uniform completion; resolves any identified problems and alerts supervisor. Observe all safety requirements. Setup and operate a rivet machine. Package finished goods. Maintain required efficiency rates. Able to work with limited supervision. Capable of clipping lock bars both manually and automated. Sorting and packaging injection molding parts. Maintain a clean and neat work environment. Employee must show up to work on time and be able to work overtime as needed. Performs other related duties as assigned. Assumes responsibility without supervision, self-motivated and proactive Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions Minimum Required Education: High school diploma or equivalent required. Required Work Experience: 0-1 Year of Manufacturing experience Work environment and Physical Requirements: Working conditions are based in a manufacturing setting. To perform this job successfully the individual must be able to stand and/or sit for prolonged periods of time. Must be able to traverse production facility and climb ladders. Must be able to lift and or move up to 50 pounds at a time. Must have manual dexterity in order to assemble products or machines as directed. Perform repetitive tasks throughout the entire shift. Must have excellent hand-eye coordination. Must wear gloves and safety glasses. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Benefits: Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays

Westaff is looking to hire Assemblers for multiple companies near Meriden, CT! The assemblers will be rotating through out the workshop responsible for multiples stations such as Assembling parts, Trimming, Deburring, and Inspecting finished products. Hours: 1st and 2nd shifts available Pay: $17.00-19.00/hr based on experience The responsibilities of the Assemblers are: Assembling products utilizing different hand tools such as gauges, micrometers, calipers, screw drivers, wrenches, etc. Trimming products as needed Deburring Inspection of goods and products Printing Coating & baking (finishing of product) Final inspection The requirements for the Assemblers are: 2+ years of Assembler experience Prior job longevity in the manufacturing field - reliable Flexible & willing to work in all departments (cross-trained) Great attention to detail Working As A Westaff Assembler Entitles You To Competitive Benefits Upon Hire: Weekly pay! - Access to pay stubs online & through Westaff's mobile app Health, vision, and dental insurance plans Retirement savings plans Access to FREE online skill building courses APPLY TODAY for IMMEDIATE consideration for the Machine Operator/ Assembler position! Military and Veterans are Encouraged to apply!

Job Title: Assembly Operator Technician III Reports To: Value Stream Supervisor About Silgan Dispensing Silgan Dispensing Systems is a growing global company with operations in over 10 countries where we develop dispensing solutions for iconic brands in the beauty, fragrance, personal care, home, and healthcare markets. The dispensers we manufacture can be found on some of your favorite products. When you spray your kitchen counter, wash your hair, or put on your favorite perfume there's a good chance you're using a sprayer, pump or closure we make!! We help brands enhance peoples' lives through our innovative solutions that make dispensing easier, more comfortable, and more sustainable. At Silgan Dispensing, you can expect an open, safe, and welcoming workplace with team members who are committed to our values. We are customer-oriented, innovative, driven to excel, respectful, inclusive and sustainably focused. We are guided by our belief that we do our best work when we work as One Team. About this Role The Assembly Operator Technician III position is an important role on the Silgan Dispensing team and is a great opportunity for those looking to advance their skills. Our plant help produce thousands of our dispensing products each day. So, it's important to keep it running efficiently and continuously. The Assembly Operator Technician III keeps our equipment operational by setting up, optimizing production runs and performing quality checks as needed for each machine. Here's a list of duties that our Assembly Operator Technician III performs on a typical day: Responsible for the safe, efficient completion of the assembly process in a high quality and repeatable manner Perform duties to complete a wide variety of complicated machine set ups (such as dip tube changes, mechanical parts change) Perform quality checks/audits during a production run through visual inspection and aligned with the quality plan Measure, examine and test assembly units to detect malfunctions or out of tolerance conditions. Adjust machine or fixtures as necessary. Perform preventive maintenance on Assembly machines to maintain production equipment and reduce downtime. Identify efficiency improvement, cost savings and quality improvement opportunities. Participate in EH&S reviews Assist with CI activities as needed: root cause analysis and corrective actions Maintain accurate documentation of quality inspection results and production results Ensure outgoing products follow required specifications Escalates identified safety, quality, performance issues as may be needed. Training and supporting of others within the value stream. Supports machine disassembly Troubleshoots issues beyond basic resets, being able to identify incorrect machine messages and determining root cause/corrective actions Determines corrective actions on electrical parts or electrical related issues Drives continuous improvement strategies Support on time delivery by running assembly machines if needed Other duties as assigned. Qualified Candidates must have: Basic shop math/computer skills Basic machine troubleshooting skills/ability to solve mechanical issues Willingness to assist other cross-functional groups based on needs Ability to work independently and be proactive Ability to analyze, interpret and report data based on machine performance. Min of high school diploma or GED required Ability to learn, grow and adapt to changing business needs. Preferred Candidates will have: Willingness to assist other cross-functional groups based on needs. Ability to work independently and be proactive. Ability to analyze, interpret and report data. Ability to prioritize work is essential. Good oral and written communication skills Physical Demands (Reasonable accommodations provided): Ability to lift and/or move 35 lbs. Use of Personal Protective Equipment (PPE) on the production floor. Physical requirements include but not limited to sitting, standing, climbing, walking, lifting, carrying, pulling, pushing, stooping, crouching, color determination and grasping. Benefits: Those who join our team will have access to a competitive benefits package that includes options for medical, dental, vision, 401(K), paid vacation time, paid holidays, overtime eligibility for hourly employees and much more! Silgan dispensing also has a generous shift differential pay for hourly employees on 2nd and 3rd shift. LIMITATIONS AND DISCLAIMER The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. LIMITATIONS AND DISCLAIMER The above is meant to describe the general nature and level of work being performed; it is not intended to be construed as an exhaustive list of all responsibilities, duties and skills required for the position. All job requirements are subject to possible modification to reasonably accommodate individuals with disabilities. Some requirements may exclude individuals who pose a direct threat or significant risk to the health and safety of themselves or other employees. This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform other job-related duties requested by their supervisor in compliance with Federal and State Laws. Requirements are representative of minimum levels of knowledge, skills and/or abilities. To perform this job successfully, the employee must possess the abilities or aptitudes to perform each duty proficiently. Continued employment remains on an “at-will” basis. Silgan is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, sex, national origin, age, marital status, or the presence of a disability, which would not prevent the performance of essential job duties with, or without reasonable accommodation of any other protective status. Silgan is a drug-free workplace.

Country: United States of America Onsite Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. Set-up, assemble, disassemble and test actuators, gas turbine assemblies, turbine pump controls or electrical and mechanical sub-assemblies while practicing and complying with environmental, health and safety directions and procedures. What You Will Do * Work from operation sheets and books, blue prints, shop travelers, fly sheets, rework and repair directives, videosonic, computer generated and other written and verbal instructions. * Assemble hardware maintaining close fits and tolerances and make adjustments to meet specifications. * Solder, crimp and pot electrical components. * Dry test and calibrate component assemblies and make adjustments to meet specifications. * Test hardware to maintain requirements for pressure, static and dynamic calibrations, maximum flow, flight and other schedules, and/or integrated area systems. * Test hardware under hot or cold fuel conditions. * Make computations using specified handbook formulas, record data on test sheets and plot results on established curves. * Check for and repair internal and external leaks of equipment and hardware. * Use gaging such as vernier calipers, micrometers, dial indicators, surface plates, checking fixtures, protractors, flow meters, manometers, recorders, torque wrenches, location, feeler, height, temperature, and pressure gages. * Remove, inspect, change, parts or sub-assemblies to meet test requirements without removing hardware from the test rig. * Refer unusual problems to appropriate level for resolution. * Generate, maintain and follow materials pulls and assembly floor schedules. Move hardware and paperwork through to finish stores and maintain status records. * Instruct one or two fellow employees in proper performance of duties. * Receive, store, inventory, label, inspect, issue, disburse or ship parts, hardware, materials, gages, fixtures, tools, supplies, equipment, assemblies or bin stock. Process and match required paperwork. * Insure gaging meets metrology control requirements. * Make electrical inspections and check for resistance, voltage and continuity using equipment such as meggers, resistance bridge, ammeter, voltmeter and ohmmeter. * Inspect and verify proper build-up of hardware, checking visual conditions, sequence of assembly, positioning and torque requirements. Perform procedural checks. * Inspect and verify proper test and calibration requirements are met. * Perform spin balance to meet specifications. * Process hardware for shipment by assembling, disassembling, cleaning, safety cable and wiring, stamping, masking or painting. Mix cements and label containers. * Obtain and order supplies, tooling, fixtures, gaging and hardware, using computer if necessary. * Check operation sheets, books and blue prints for latest revision letters and changes. * Monitor process for trends and out of control conditions. Identify questionable product and/or processes to appropriate level for resolution. * Clean, visually inspect, verify serial and set numbers, demagnetize, preserve and package hardware. Flush and purge hardware and fixtures. * Keep equipment and surroundings neat and clean. * Perform related duties as required within the scope of this job function. * 2nd Shift: Monday - Friday, 3:30 pm - 12 am * Training Schedule: Mandatory training will take place on 1st/2nd shift until management deems the employee is able to work independently and unsupervised. At that time, the employee will move to 2nd shift. We anticipate the training to be up to 6 months. Qualifications You Must Have * 1-2 years of related experience * High school Diploma or equivalent. * Previous electrical/mechanical experience required. * Must have experience in troubleshooting and problem solving. * U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract Qualifications We Prefer * Experience with arithmetic involving decimals and fractions. * Experience with measuring equipment such as micrometers and ohmmeters. * Experience with basic hand tools, specifically torque wrenches. * Experience reading blueprints or electronic manuals. What We Offer Some of our competitive benefits package includes: * Medical, dental, and vision insurance * Generous 401(k) plan that includes employer matching funds * Collins provides eligible employees with paid time off * Tuition reimbursement program * Student Loan Repayment Program * Life insurance and disability coverage * Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection * Birth, adoption, parental leave benefits * Ovia Health, fertility, and family planning * Adoption Assistance * Autism Benefit * Employee Assistance Plan, including up to 10 free counseling sessions * Healthy You Incentives, wellness rewards program * Doctor on Demand, virtual doctor visits * Bright Horizons, child and elder care services * Teladoc Medical Experts, second opinion program * And more! Learn More & Apply Now! We make modern flight possible for millions of travelers and our military every second. Our major product lines are on-board virtually every aircraft flying. Be it keeping passengers safe with our emergency power generation systems or creating a positive in-flight experience through reliable cabin pressure controls and quieter engines, Power & Controls focuses on delivering a best-in-class experience to our customers. We hire the top people in the industry. Their ideas drive our performance, and their integrity keeps our customers happy. Join us as we take flight! * Please ensure the role type (defined below) is appropriate for your needs before applying to this role. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. The salary range for this role $32.65 - $41.04 per hour; however, Raytheon Technologies considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again. Apply now and be part of the team that's redefining aerospace, every day. #TopOpps Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

FUNCTION: In an assigned area or cell, work with limited supervision to perform the assembly of Production aircraft parts as well as the teardown, and assembly of Overhaul & Repair designated aircraft parts. Performs fitting and assembly operations on various production aircraft parts. Performs teardown and assembly of overhaul & repair aircraft parts. Cleans and applies special adhesives to materials resulting in a permanent bonding of the materials. Sets up and controls furnace temperature in accordance with established specifications. Must be capable of reading and interpreting blueprints, operation sheets, technical specifications and overhaul manuals. Maintains necessary records and files. Works with limited supervision. Assists operators in a lower classification on assembly techniques as needed. Performs temporary part marking, In process transfer marking and final part parking operations using Vibro Engraving, Electro-chemical Etch, Ink Stamp, Dot-Peening, and Paint marking with suitable legibility to meet drawing or customer specification requirements Works under supervision with salary and hourly support groups to address the most complex problems. Must possess a skill level that eliminates errors that cause nonconforming material and maintain a consistent level of high quality work. Identify non-conformances at time of occurrence. Recognize opportunities for non-conformances and notify management of need for action. Actively participate in various aspects of Lean production and Continuous Improvement projects that drive efficiency improvements. Must work safely at all times. Participate in safety improvement initiatives by raising any safety concerns and helping to come up with corrective actions. May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department or cell objectives and to develop individuals' skills.

Weatherford is a leading global energy services company. Our world-class experts partner with customers to optimize their resources and realize the full potential of their assets. Across our operating locations, including manufacturing, research and development, service, and training facilities, operators choose us for strategic solutions that add efficiency, flexibility, and responsibility to any energy operation. We are focused on technology development, digital solutions, and defining our footprint in the new energy space. Our ability to provide integrated solutions across our segments will be critical to growth in our core operations and the energy transition. Energy producers face unique challenges every day, so it is our job to create solutions that enhance safety, streamline operations, and sustain uptime to meet or exceed their targets. We operate across the global energy landscape employing some of the best diverse talent in the industry. At Weatherford, we understand the value each individual brings to the table. We celebrate diversity in all its forms and are immensely proud of our workforce. We invite you to join our passionate, talented, word-class team. When you join Weatherford, you instantly feel connected to something bigger - a community that is grounded by our core values and driven to create innovative solutions for our customers. We celebrate each other's successes, grow together, and learn from each other constantly. Individually, we are impressive. Together, we are unstoppable. We are One Weatherford. Weatherford offers competitive compensation, a comprehensive benefits program and provides you a challenging and enriching career path, with a healthy balance of structure and flexibility to chart your own course. We are focused on providing a challenging and enriching career path with a healthy balance of structure and flexibility to chart your own course. We are an innovative, global company with wide-ranging opportunities that include career-enhancing talent rotations. Our structured career paths will ensure that you know what it takes to build your ideal career at Weatherford when you join our Company. We also offer a comprehensive benefits program, including health insurance coverage, income protection plans, a 401(k) savings plan, Company paid holidays, and paid time off for vacation. Weatherford is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. Job Description Weatherford is hiring a Assembly Test Technician for our Wallingford facility. This is a hands-on, rewarding role that you'll perform testing & assembly for the oil and gas industry. The Assembly Test Technician will be working within a supportive, inclusive team in a fast-paced, progressive environment. Weatherford provides training, excellent benefits and fantastic career progression. Perform mechanical, optical and/or electrical assembly of components. Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. Assemble equipment per engineered drawings or as instructed by others. Inspect completed components for accuracy and functionality. Maintain an orderly work area Properly maintain company supplied tooling. Aid in developing of new procedures and improving existing procedures. Must understand and comply with all safety rules and company policies of Weatherford. Work assignments carried out to the highest quality level. Performs any assembly type functions, using hand or power tools. May operate both stationary and moving overhead cranes. Operates any equipment needed to perform job. Must be able to read blue prints. Perform various other duties and activities as assigned by supervisor within the physical constraints of the job. Qualifications 1+ years prior assembly or manufacturing experience. Mechanical aptitude. Good verbal communication skills Basic computer skills Ability to read and comprehend simple instructions, short correspondence, and memos in English

Are you looking for a new and exciting opportunity to use your skills in a successful and growing company? If you have the desire to work in an energetic, collaborative environment and you are looking for long-term growth then check out this opportunity at Bausch+Stroebel Machine Company, Inc. Bausch+Ströbel is a trusted and experienced supplier to the pharmaceutical industry specializing in filling and packaging systems. B+S filling and packaging lines are used worldwide to fill syringes, vials, cartridges, and ampoules with high-grade liquid and powder pharmaceutical products. Applications range from cleaning and sterilization to labeling and syringe assembly. In addition to designing and building systems tailored to customer specifications, Bausch+Ströbel provides a wide range of specialized services aimed at ensuring system reliability and productivity. Our goal: Providing the best technical and economical answers to the challenges presented by the world market. With this clear goal in mind, we are designing and manufacturing packaging equipment for the pharmaceutical and allied industries. From modest beginnings more than 50 years ago - with a staff of only four - Bausch+Ströbel has developed into an international enterprise. It is now one of the leading manufacturers in pharmaceutical packaging equipment. We are striving to create optimal solutions for our customers. To achieve this aim, we are continually making innovations to improve products and processes. Job Description This role will install and test electrical components for B+S packaging machines (filling, closing) and control cabinets. Primarily in-house with occasional travel. Essential Duties and Responsibilities: Perform electrical wiring and installation on pharmaceutical packaging machines and control cabinets Run and document the hardware test Processing of the electrical safety test according to UL regulations Creating electrical documentation Competencies: Demonstrates persistence, good foresight, and strong analytical thinking skills that allow troubleshooting, overcoming obstacles, and implementing solutions. Ability to work in a team environment. Maintain a neat and orderly work environment. Capacity to work simultaneously on various projects FLSA Status: Non-exempt position - Non-exempt employees will receive overtime pay at 1.5 times the calculated hourly rate for time worked more than 40 hours per week. Qualifications Ability to interpret drawings, diagrams, and machine specifications. Strong knowledge of manufacturing processes is preferred. Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Good understanding of cGMP requirements, change control, and gown qualifications. Good health and physical ability are necessary to enter aseptic clean rooms. Travel to North American customer sites, complete background checks, drug, alcohol, and safety testing per individual client requirements Must possess and maintain a current, valid Driver's License Strong attention to detail Education and/or Experience: Completed training or an apprenticeship as a mechatronics or electro mechanical technician, electronics technician for automation technology, control cabinet builder, electrical installer or comparable knowledge and skills or Associate's degree in technology field, e.g., electrical, electronics, etc. 3+ years of relevant experience in the field of control cabinet construction and plant installation desirable Additional Information Benefits: We offer medical and dental plans (the company pays 83% of the premium for employees and eligible dependents); company-sponsored health reimbursement accounts (HRA); Flexible Spending Accounts (FSA) for medical and/or dependent care, company-paid short-term and long-term disability plans, company-paid life insurance and AD&D plan; voluntary vision plan; voluntary pet insurance; voluntary identity theft protection plans; voluntary life, and dependent life plans at discounted group rates; a 401k retirement plan with a 4% company match, company paid holidays and generous a PTO plan. Should you meet the above requirements and qualifications and feel like this position seems like a perfect fit for you, please submit your resume along with a cover letter including your salary expectations. Bausch+Stroebel's US Headquarters is located in Branford, CT ******************************* Bausch+Stroebel is an Equal Opportunity Employer. Bausch+Stroebel provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, transfer, leaves of absence, compensation, and training. m/f/d

Fiber Components and Sensor Assembly Business Unit in East Granby CT has a need for a TEMPORARY Assembly Technician to support the business. We are looking for an energetic and motivated person which will be challenged in manufacturing working with state-of-the art fiber assembly technology.DURATION: 6-8 weeks with possible extension Primary Duties & Responsibilities * Work per standard operation procedures * Document the manufacturing process as required * Inspect parts/assemblies under microscope * Perform basic equipment maintenance & calibration * Troubleshoot equipment as needed * Complete rework on assemblies and/or systems as a result of testing * Assist recommending solutions to technical problems * May assist in the selection and set-up of specialized test equipment * Assist engineers as needed * Cross-training in other areas as needed Education & Experience * High school diploma or equivalent * Previous experience or practice executing delicate tasks with small, fragile parts * Computer literacy including data entry in Excel * Ability to see details at close range * Excellent hand to eye coordination The job requires access to defense articles and related technical data subject to the International Traffic and Arms Regulations ("ITAR") 22 C.F.R. §§ 120-130. Therefore applicants must be U.S. persons as the term is defined in ITAR § 120.15